blob: 86870308d6b1eb59678e2f37a4ff93fdcc80d122 [file] [log] [blame]
/*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.apache.commons.math4.core.jdkmath;
import java.io.PrintStream;
import org.apache.commons.numbers.core.Precision;
/**
* Portable alternative to {@link Math} and {@link StrictMath}.
* <p>
* Caveat: At the time of implementation, the {@code AccurateMath} functions
* were often faster and/or more accurate than their JDK equivalent.
* Nowadays, it would not be surprising that they are always slower (due
* to the various JVM optimizations that have appeared since Java 5).
* However, any change to this class should ensure that the current
* accuracy is not lost.
* <p>
* AccurateMath is a drop-in replacement for both Math and StrictMath.
* For example, a call to {@code Math.sin(x)} can be replaced by a call
* to {@code AccurateMath.sin(x)}.
* </p>
* <p>
* AccurateMath speed is achieved by relying heavily on optimizing compilers
* to native code present in many JVMs today and use of large tables.
* The larger tables are lazily initialized on first use, so that the setup
* time does not penalize methods that don't need them.
* </p>
* <p>
* Note that AccurateMath is extensively used inside Apache Commons Math,
* so by calling some algorithms, the overhead when the tables need to be
* initialized will occur regardless of the end-user calling AccurateMath
* methods directly or not.
* Performance figures for a specific JVM and hardware can be evaluated by
* running the AccurateMathTestPerformance tests in the test directory of
* the source distribution.
* </p>
* <p>
* AccurateMath accuracy should be mostly independent of the JVM as it relies only
* on IEEE-754 basic operations and on embedded tables. Almost all operations
* are accurate to about 0.5 ulp throughout the domain range. This statement,
* of course is only a rough global observed behavior, it is <em>not</em> a
* guarantee for <em>every</em> double numbers input (see William Kahan's
* <a href="http://en.wikipedia.org/wiki/Rounding#The_table-maker.27s_dilemma">
* Table Maker's Dilemma</a>).
* </p>
* <p>
* AccurateMath implements the following methods not found in Math/StrictMath:
* <ul>
* <li>{@link #asinh(double)}</li>
* <li>{@link #acosh(double)}</li>
* <li>{@link #atanh(double)}</li>
* </ul>
*
* @since 2.2
*/
public final class AccurateMath {
/** Archimede's constant PI, ratio of circle circumference to diameter. */
public static final double PI = 105414357.0 / 33554432.0 + 1.984187159361080883e-9;
/** Napier's constant e, base of the natural logarithm. */
public static final double E = 2850325.0 / 1048576.0 + 8.254840070411028747e-8;
/** Index of exp(0) in the array of integer exponentials. */
static final int EXP_INT_TABLE_MAX_INDEX = 750;
/** Length of the array of integer exponentials. */
static final int EXP_INT_TABLE_LEN = EXP_INT_TABLE_MAX_INDEX * 2;
/** Logarithm table length. */
static final int LN_MANT_LEN = 1024;
/** Exponential fractions table length. */
static final int EXP_FRAC_TABLE_LEN = 1025; // 0, 1/1024, ... 1024/1024
/** Error message. */
private static final String ZERO_DENOMINATOR_MSG = "Division by zero";
/** Error message. */
private static final String OVERFLOW_MSG = "Overflow";
/** StrictMath.log(Double.MAX_VALUE): {@value}. */
private static final double LOG_MAX_VALUE = StrictMath.log(Double.MAX_VALUE);
/** Indicator for tables initialization.
* <p>
* This compile-time constant should be set to true only if one explicitly
* wants to compute the tables at class loading time instead of using the
* already computed ones provided as literal arrays below.
* </p>
*/
private static final boolean RECOMPUTE_TABLES_AT_RUNTIME = false;
/** log(2) (high bits). */
private static final double LN_2_A = 0.693147063255310059;
/** log(2) (low bits). */
private static final double LN_2_B = 1.17304635250823482e-7;
/** Coefficients for log, when input 0.99 < x < 1.01. */
private static final double[][] LN_QUICK_COEF = {
{1.0, 5.669184079525E-24},
{-0.25, -0.25},
{0.3333333134651184, 1.986821492305628E-8},
{-0.25, -6.663542893624021E-14},
{0.19999998807907104, 1.1921056801463227E-8},
{-0.1666666567325592, -7.800414592973399E-9},
{0.1428571343421936, 5.650007086920087E-9},
{-0.12502530217170715, -7.44321345601866E-11},
{0.11113807559013367, 9.219544613762692E-9},
};
/** Coefficients for log in the range of 1.0 < x < 1.0 + 2^-10. */
private static final double[][] LN_HI_PREC_COEF = {
{1.0, -6.032174644509064E-23},
{-0.25, -0.25},
{0.3333333134651184, 1.9868161777724352E-8},
{-0.2499999701976776, -2.957007209750105E-8},
{0.19999954104423523, 1.5830993332061267E-10},
{-0.16624879837036133, -2.6033824355191673E-8}
};
/** Sine, Cosine, Tangent tables are for 0, 1/8, 2/8, ... 13/8 = PI/2 approx. */
private static final int SINE_TABLE_LEN = 14;
/** Sine table (high bits). */
private static final double[] SINE_TABLE_A =
{
+0.0d,
+0.1246747374534607d,
+0.24740394949913025d,
+0.366272509098053d,
+0.4794255495071411d,
+0.5850973129272461d,
+0.6816387176513672d,
+0.7675435543060303d,
+0.8414709568023682d,
+0.902267575263977d,
+0.9489846229553223d,
+0.9808930158615112d,
+0.9974949359893799d,
+0.9985313415527344d,
};
/** Sine table (low bits). */
private static final double[] SINE_TABLE_B =
{
+0.0d,
-4.068233003401932E-9d,
+9.755392680573412E-9d,
+1.9987994582857286E-8d,
-1.0902938113007961E-8d,
-3.9986783938944604E-8d,
+4.23719669792332E-8d,
-5.207000323380292E-8d,
+2.800552834259E-8d,
+1.883511811213715E-8d,
-3.5997360512765566E-9d,
+4.116164446561962E-8d,
+5.0614674548127384E-8d,
-1.0129027912496858E-9d,
};
/** Cosine table (high bits). */
private static final double[] COSINE_TABLE_A =
{
+1.0d,
+0.9921976327896118d,
+0.9689123630523682d,
+0.9305076599121094d,
+0.8775825500488281d,
+0.8109631538391113d,
+0.7316888570785522d,
+0.6409968137741089d,
+0.5403022766113281d,
+0.4311765432357788d,
+0.3153223395347595d,
+0.19454771280288696d,
+0.07073719799518585d,
-0.05417713522911072d,
};
/** Cosine table (low bits). */
private static final double[] COSINE_TABLE_B =
{
+0.0d,
+3.4439717236742845E-8d,
+5.865827662008209E-8d,
-3.7999795083850525E-8d,
+1.184154459111628E-8d,
-3.43338934259355E-8d,
+1.1795268640216787E-8d,
+4.438921624363781E-8d,
+2.925681159240093E-8d,
-2.6437112632041807E-8d,
+2.2860509143963117E-8d,
-4.813899778443457E-9d,
+3.6725170580355583E-9d,
+2.0217439756338078E-10d,
};
/** Tangent table, used by atan() (high bits). */
private static final double[] TANGENT_TABLE_A =
{
+0.0d,
+0.1256551444530487d,
+0.25534194707870483d,
+0.3936265707015991d,
+0.5463024377822876d,
+0.7214844226837158d,
+0.9315965175628662d,
+1.1974215507507324d,
+1.5574076175689697d,
+2.092571258544922d,
+3.0095696449279785d,
+5.041914939880371d,
+14.101419448852539d,
-18.430862426757812d,
};
/** Tangent table, used by atan() (low bits). */
private static final double[] TANGENT_TABLE_B =
{
+0.0d,
-7.877917738262007E-9d,
-2.5857668567479893E-8d,
+5.2240336371356666E-9d,
+5.206150291559893E-8d,
+1.8307188599677033E-8d,
-5.7618793749770706E-8d,
+7.848361555046424E-8d,
+1.0708593250394448E-7d,
+1.7827257129423813E-8d,
+2.893485277253286E-8d,
+3.1660099222737955E-7d,
+4.983191803254889E-7d,
-3.356118100840571E-7d,
};
/** Bits of 1/(2*pi), need for reducePayneHanek(). */
private static final long[] RECIP_2PI = new long[] {
(0x28be60dbL << 32) | 0x9391054aL,
(0x7f09d5f4L << 32) | 0x7d4d3770L,
(0x36d8a566L << 32) | 0x4f10e410L,
(0x7f9458eaL << 32) | 0xf7aef158L,
(0x6dc91b8eL << 32) | 0x909374b8L,
(0x01924bbaL << 32) | 0x82746487L,
(0x3f877ac7L << 32) | 0x2c4a69cfL,
(0xba208d7dL << 32) | 0x4baed121L,
(0x3a671c09L << 32) | 0xad17df90L,
(0x4e64758eL << 32) | 0x60d4ce7dL,
(0x272117e2L << 32) | 0xef7e4a0eL,
(0xc7fe25ffL << 32) | 0xf7816603L,
(0xfbcbc462L << 32) | 0xd6829b47L,
(0xdb4d9fb3L << 32) | 0xc9f2c26dL,
(0xd3d18fd9L << 32) | 0xa797fa8bL,
(0x5d49eeb1L << 32) | 0xfaf97c5eL,
(0xcf41ce7dL << 32) | 0xe294a4baL,
(0x9afed7ecL << 32)};
/** Bits of pi/4, need for reducePayneHanek(). */
private static final long[] PI_O_4_BITS = new long[] {
(0xc90fdaa2L << 32) | 0x2168c234L,
(0xc4c6628bL << 32) | 0x80dc1cd1L };
/** Eighths.
* This is used by sinQ, because its faster to do a table lookup than
* a multiply in this time-critical routine
*/
private static final double[] EIGHTHS = {
0, 0.125, 0.25, 0.375, 0.5, 0.625, 0.75, 0.875, 1.0, 1.125, 1.25, 1.375, 1.5, 1.625};
/** Table of 2^((n+2)/3). */
private static final double[] CBRTTWO = {0.6299605249474366,
0.7937005259840998,
1.0,
1.2599210498948732,
1.5874010519681994};
/*
* There are 52 bits in the mantissa of a double.
* For additional precision, the code splits double numbers into two parts,
* by clearing the low order 30 bits if possible, and then performs the arithmetic
* on each half separately.
*/
/**
* 0x40000000 - used to split a double into two parts, both with the low order bits cleared.
* Equivalent to 2^30.
*/
private static final long HEX_40000000 = 0x40000000L; // 1073741824L
/** Mask used to clear low order 30 bits. */
private static final long MASK_30BITS = -1L - (HEX_40000000 - 1); // 0xFFFFFFFFC0000000L;
/** Mask used to clear the non-sign part of an int. */
private static final int MASK_NON_SIGN_INT = 0x7fffffff;
/** Mask used to clear the non-sign part of a long. */
private static final long MASK_NON_SIGN_LONG = 0x7fffffffffffffffL;
/** Mask used to extract exponent from double bits. */
private static final long MASK_DOUBLE_EXPONENT = 0x7ff0000000000000L;
/** Mask used to extract mantissa from double bits. */
private static final long MASK_DOUBLE_MANTISSA = 0x000fffffffffffffL;
/** Mask used to add implicit high order bit for normalized double. */
private static final long IMPLICIT_HIGH_BIT = 0x0010000000000000L;
/** 2^52 - double numbers this large must be integral (no fraction) or NaN or Infinite. */
private static final double TWO_POWER_52 = 4503599627370496.0;
/** Constant: {@value}. */
private static final double F_1_3 = 1d / 3d;
/** Constant: {@value}. */
private static final double F_1_5 = 1d / 5d;
/** Constant: {@value}. */
private static final double F_1_7 = 1d / 7d;
/** Constant: {@value}. */
private static final double F_1_9 = 1d / 9d;
/** Constant: {@value}. */
private static final double F_1_11 = 1d / 11d;
/** Constant: {@value}. */
private static final double F_1_13 = 1d / 13d;
/** Constant: {@value}. */
private static final double F_1_15 = 1d / 15d;
/** Constant: {@value}. */
private static final double F_1_17 = 1d / 17d;
/** Constant: {@value}. */
private static final double F_3_4 = 3d / 4d;
/** Constant: {@value}. */
private static final double F_15_16 = 15d / 16d;
/** Constant: {@value}. */
private static final double F_13_14 = 13d / 14d;
/** Constant: {@value}. */
private static final double F_11_12 = 11d / 12d;
/** Constant: {@value}. */
private static final double F_9_10 = 9d / 10d;
/** Constant: {@value}. */
private static final double F_7_8 = 7d / 8d;
/** Constant: {@value}. */
private static final double F_5_6 = 5d / 6d;
/** Constant: {@value}. */
private static final double F_1_2 = 1d / 2d;
/** Constant: {@value}. */
private static final double F_1_4 = 1d / 4d;
/**
* Private Constructor.
*/
private AccurateMath() {}
// Generic helper methods
/**
* Get the high order bits from the mantissa.
* Equivalent to adding and subtracting HEX_40000 but also works for very large numbers
*
* @param d the value to split
* @return the high order part of the mantissa
*/
private static double doubleHighPart(double d) {
if (d > -Precision.SAFE_MIN && d < Precision.SAFE_MIN) {
return d; // These are un-normalised - don't try to convert
}
long xl = Double.doubleToRawLongBits(d); // can take raw bits because just gonna convert it back
xl &= MASK_30BITS; // Drop low order bits
return Double.longBitsToDouble(xl);
}
/** Compute the square root of a number.
* <p><b>Note:</b> this implementation currently delegates to {@link Math#sqrt}
* @param a number on which evaluation is done
* @return square root of a
*/
public static double sqrt(final double a) {
return Math.sqrt(a);
}
/** Compute the hyperbolic cosine of a number.
* @param x number on which evaluation is done
* @return hyperbolic cosine of x
*/
public static double cosh(double x) {
if (Double.isNaN(x)) {
return x;
}
// cosh[z] = (exp(z) + exp(-z))/2
// for numbers with magnitude 20 or so,
// exp(-z) can be ignored in comparison with exp(z)
if (x > 20) {
if (x >= LOG_MAX_VALUE) {
// Avoid overflow (MATH-905).
final double t = exp(0.5 * x);
return (0.5 * t) * t;
} else {
return 0.5 * exp(x);
}
} else if (x < -20) {
if (x <= -LOG_MAX_VALUE) {
// Avoid overflow (MATH-905).
final double t = exp(-0.5 * x);
return (0.5 * t) * t;
} else {
return 0.5 * exp(-x);
}
}
final double[] hiPrec = new double[2];
if (x < 0.0) {
x = -x;
}
exp(x, 0.0, hiPrec);
double ya = hiPrec[0] + hiPrec[1];
double yb = -(ya - hiPrec[0] - hiPrec[1]);
double temp = ya * HEX_40000000;
double yaa = ya + temp - temp;
double yab = ya - yaa;
// recip = 1/y
double recip = 1.0 / ya;
temp = recip * HEX_40000000;
double recipa = recip + temp - temp;
double recipb = recip - recipa;
// Correct for rounding in division
recipb += (1.0 - yaa * recipa - yaa * recipb - yab * recipa - yab * recipb) * recip;
// Account for yb
recipb += -yb * recip * recip;
// y = y + 1/y
temp = ya + recipa;
yb += -(temp - ya - recipa);
ya = temp;
temp = ya + recipb;
yb += -(temp - ya - recipb);
ya = temp;
double result = ya + yb;
result *= 0.5;
return result;
}
/** Compute the hyperbolic sine of a number.
* @param x number on which evaluation is done
* @return hyperbolic sine of x
*/
public static double sinh(double x) {
boolean negate = false;
if (Double.isNaN(x)) {
return x;
}
// sinh[z] = (exp(z) - exp(-z) / 2
// for values of z larger than about 20,
// exp(-z) can be ignored in comparison with exp(z)
if (x > 20) {
if (x >= LOG_MAX_VALUE) {
// Avoid overflow (MATH-905).
final double t = exp(0.5 * x);
return (0.5 * t) * t;
} else {
return 0.5 * exp(x);
}
} else if (x < -20) {
if (x <= -LOG_MAX_VALUE) {
// Avoid overflow (MATH-905).
final double t = exp(-0.5 * x);
return (-0.5 * t) * t;
} else {
return -0.5 * exp(-x);
}
}
if (x == 0) {
return x;
}
if (x < 0.0) {
x = -x;
negate = true;
}
double result;
if (x > 0.25) {
double[] hiPrec = new double[2];
exp(x, 0.0, hiPrec);
double ya = hiPrec[0] + hiPrec[1];
double yb = -(ya - hiPrec[0] - hiPrec[1]);
double temp = ya * HEX_40000000;
double yaa = ya + temp - temp;
double yab = ya - yaa;
// recip = 1/y
double recip = 1.0 / ya;
temp = recip * HEX_40000000;
double recipa = recip + temp - temp;
double recipb = recip - recipa;
// Correct for rounding in division
recipb += (1.0 - yaa * recipa - yaa * recipb - yab * recipa - yab * recipb) * recip;
// Account for yb
recipb += -yb * recip * recip;
recipa = -recipa;
recipb = -recipb;
// y = y + 1/y
temp = ya + recipa;
yb += -(temp - ya - recipa);
ya = temp;
temp = ya + recipb;
yb += -(temp - ya - recipb);
ya = temp;
result = ya + yb;
result *= 0.5;
} else {
double[] hiPrec = new double[2];
expm1(x, hiPrec);
double ya = hiPrec[0] + hiPrec[1];
double yb = -(ya - hiPrec[0] - hiPrec[1]);
/* Compute expm1(-x) = -expm1(x) / (expm1(x) + 1) */
double denom = 1.0 + ya;
double denomr = 1.0 / denom;
double denomb = -(denom - 1.0 - ya) + yb;
double ratio = ya * denomr;
double temp = ratio * HEX_40000000;
double ra = ratio + temp - temp;
double rb = ratio - ra;
temp = denom * HEX_40000000;
double za = denom + temp - temp;
double zb = denom - za;
rb += (ya - za * ra - za * rb - zb * ra - zb * rb) * denomr;
// Adjust for yb
rb += yb * denomr; // numerator
rb += -ya * denomb * denomr * denomr; // denominator
// y = y - 1/y
temp = ya + ra;
yb += -(temp - ya - ra);
ya = temp;
temp = ya + rb;
yb += -(temp - ya - rb);
ya = temp;
result = ya + yb;
result *= 0.5;
}
if (negate) {
result = -result;
}
return result;
}
/** Compute the hyperbolic tangent of a number.
* @param x number on which evaluation is done
* @return hyperbolic tangent of x
*/
public static double tanh(double x) {
boolean negate = false;
if (Double.isNaN(x)) {
return x;
}
// tanh[z] = sinh[z] / cosh[z]
// = (exp(z) - exp(-z)) / (exp(z) + exp(-z))
// = (exp(2x) - 1) / (exp(2x) + 1)
// for magnitude > 20, sinh[z] == cosh[z] in double precision
if (x > 20.0) {
return 1.0;
}
if (x < -20) {
return -1.0;
}
if (x == 0) {
return x;
}
if (x < 0.0) {
x = -x;
negate = true;
}
double result;
if (x >= 0.5) {
double[] hiPrec = new double[2];
// tanh(x) = (exp(2x) - 1) / (exp(2x) + 1)
exp(x * 2.0, 0.0, hiPrec);
double ya = hiPrec[0] + hiPrec[1];
double yb = -(ya - hiPrec[0] - hiPrec[1]);
/* Numerator */
double na = -1.0 + ya;
double nb = -(na + 1.0 - ya);
double temp = na + yb;
nb += -(temp - na - yb);
na = temp;
/* Denominator */
double da = 1.0 + ya;
double db = -(da - 1.0 - ya);
temp = da + yb;
db += -(temp - da - yb);
da = temp;
temp = da * HEX_40000000;
double daa = da + temp - temp;
double dab = da - daa;
// ratio = na/da
double ratio = na / da;
temp = ratio * HEX_40000000;
double ratioa = ratio + temp - temp;
double ratiob = ratio - ratioa;
// Correct for rounding in division
ratiob += (na - daa * ratioa - daa * ratiob - dab * ratioa - dab * ratiob) / da;
// Account for nb
ratiob += nb / da;
// Account for db
ratiob += -db * na / da / da;
result = ratioa + ratiob;
} else {
double[] hiPrec = new double[2];
// tanh(x) = expm1(2x) / (expm1(2x) + 2)
expm1(x * 2.0, hiPrec);
double ya = hiPrec[0] + hiPrec[1];
double yb = -(ya - hiPrec[0] - hiPrec[1]);
/* Numerator */
double na = ya;
double nb = yb;
/* Denominator */
double da = 2.0 + ya;
double db = -(da - 2.0 - ya);
double temp = da + yb;
db += -(temp - da - yb);
da = temp;
temp = da * HEX_40000000;
double daa = da + temp - temp;
double dab = da - daa;
// ratio = na/da
double ratio = na / da;
temp = ratio * HEX_40000000;
double ratioa = ratio + temp - temp;
double ratiob = ratio - ratioa;
// Correct for rounding in division
ratiob += (na - daa * ratioa - daa * ratiob - dab * ratioa - dab * ratiob) / da;
// Account for nb
ratiob += nb / da;
// Account for db
ratiob += -db * na / da / da;
result = ratioa + ratiob;
}
if (negate) {
result = -result;
}
return result;
}
/** Compute the inverse hyperbolic cosine of a number.
* @param a number on which evaluation is done
* @return inverse hyperbolic cosine of a
*/
public static double acosh(final double a) {
return AccurateMath.log(a + AccurateMath.sqrt(a * a - 1));
}
/** Compute the inverse hyperbolic sine of a number.
* @param a number on which evaluation is done
* @return inverse hyperbolic sine of a
*/
public static double asinh(double a) {
boolean negative = false;
if (a < 0) {
negative = true;
a = -a;
}
double absAsinh;
if (a > 0.167) {
absAsinh = AccurateMath.log(AccurateMath.sqrt(a * a + 1) + a);
} else {
final double a2 = a * a;
if (a > 0.097) {
absAsinh = a * (1 - a2 * (F_1_3 - a2 * (F_1_5 - a2 * (F_1_7 - a2 * (F_1_9 - a2 * (F_1_11 - a2 * (F_1_13 - a2 * (F_1_15 - a2 * F_1_17 * F_15_16) * F_13_14) * F_11_12) * F_9_10) * F_7_8) * F_5_6) * F_3_4) * F_1_2);
} else if (a > 0.036) {
absAsinh = a * (1 - a2 * (F_1_3 - a2 * (F_1_5 - a2 * (F_1_7 - a2 * (F_1_9 - a2 * (F_1_11 - a2 * F_1_13 * F_11_12) * F_9_10) * F_7_8) * F_5_6) * F_3_4) * F_1_2);
} else if (a > 0.0036) {
absAsinh = a * (1 - a2 * (F_1_3 - a2 * (F_1_5 - a2 * (F_1_7 - a2 * F_1_9 * F_7_8) * F_5_6) * F_3_4) * F_1_2);
} else {
absAsinh = a * (1 - a2 * (F_1_3 - a2 * F_1_5 * F_3_4) * F_1_2);
}
}
return negative ? -absAsinh : absAsinh;
}
/** Compute the inverse hyperbolic tangent of a number.
* @param a number on which evaluation is done
* @return inverse hyperbolic tangent of a
*/
public static double atanh(double a) {
boolean negative = false;
if (a < 0) {
negative = true;
a = -a;
}
double absAtanh;
if (a > 0.15) {
absAtanh = 0.5 * AccurateMath.log((1 + a) / (1 - a));
} else {
final double a2 = a * a;
if (a > 0.087) {
absAtanh = a * (1 + a2 * (F_1_3 + a2 * (F_1_5 + a2 * (F_1_7 + a2 * (F_1_9 + a2 * (F_1_11 + a2 * (F_1_13 + a2 * (F_1_15 + a2 * F_1_17))))))));
} else if (a > 0.031) {
absAtanh = a * (1 + a2 * (F_1_3 + a2 * (F_1_5 + a2 * (F_1_7 + a2 * (F_1_9 + a2 * (F_1_11 + a2 * F_1_13))))));
} else if (a > 0.003) {
absAtanh = a * (1 + a2 * (F_1_3 + a2 * (F_1_5 + a2 * (F_1_7 + a2 * F_1_9))));
} else {
absAtanh = a * (1 + a2 * (F_1_3 + a2 * F_1_5));
}
}
return negative ? -absAtanh : absAtanh;
}
/** Compute the signum of a number.
* The signum is -1 for negative numbers, +1 for positive numbers and 0 otherwise
* @param a number on which evaluation is done
* @return -1.0, -0.0, +0.0, +1.0 or NaN depending on sign of a
*/
public static double signum(final double a) {
return (a < 0.0) ? -1.0 : ((a > 0.0) ? 1.0 : a); // return +0.0/-0.0/NaN depending on a
}
/** Compute the signum of a number.
* The signum is -1 for negative numbers, +1 for positive numbers and 0 otherwise
* @param a number on which evaluation is done
* @return -1.0, -0.0, +0.0, +1.0 or NaN depending on sign of a
*/
public static float signum(final float a) {
return (a < 0.0f) ? -1.0f : ((a > 0.0f) ? 1.0f : a); // return +0.0/-0.0/NaN depending on a
}
/** Compute next number towards positive infinity.
* @param a number to which neighbor should be computed
* @return neighbor of a towards positive infinity
*/
public static double nextUp(final double a) {
return nextAfter(a, Double.POSITIVE_INFINITY);
}
/** Compute next number towards positive infinity.
* @param a number to which neighbor should be computed
* @return neighbor of a towards positive infinity
*/
public static float nextUp(final float a) {
return nextAfter(a, Float.POSITIVE_INFINITY);
}
/** Compute next number towards negative infinity.
* @param a number to which neighbor should be computed
* @return neighbor of a towards negative infinity
* @since 3.4
*/
public static double nextDown(final double a) {
return nextAfter(a, Double.NEGATIVE_INFINITY);
}
/** Compute next number towards negative infinity.
* @param a number to which neighbor should be computed
* @return neighbor of a towards negative infinity
* @since 3.4
*/
public static float nextDown(final float a) {
return nextAfter(a, Float.NEGATIVE_INFINITY);
}
/** Returns a pseudo-random number between 0.0 and 1.0.
* <p><b>Note:</b> this implementation currently delegates to {@link Math#random}
* @return a random number between 0.0 and 1.0
*/
public static double random() {
return Math.random();
}
/**
* Exponential function.
*
* Computes exp(x), function result is nearly rounded. It will be correctly
* rounded to the theoretical value for 99.9% of input values, otherwise it will
* have a 1 ULP error.
*
* Method:
* Lookup intVal = exp(int(x))
* Lookup fracVal = exp(int(x-int(x) / 1024.0) * 1024.0 );
* Compute z as the exponential of the remaining bits by a polynomial minus one
* exp(x) = intVal * fracVal * (1 + z)
*
* Accuracy:
* Calculation is done with 63 bits of precision, so result should be correctly
* rounded for 99.9% of input values, with less than 1 ULP error otherwise.
*
* @param x a double
* @return double e<sup>x</sup>
*/
public static double exp(double x) {
return exp(x, 0.0, null);
}
/**
* Internal helper method for exponential function.
* @param x original argument of the exponential function
* @param extra extra bits of precision on input (To Be Confirmed)
* @param hiPrec extra bits of precision on output (To Be Confirmed)
* @return exp(x)
*/
private static double exp(double x, double extra, double[] hiPrec) {
double intPartA;
double intPartB;
int intVal = (int) x;
/* Lookup exp(floor(x)).
* intPartA will have the upper 22 bits, intPartB will have the lower
* 52 bits.
*/
if (x < 0.0) {
// We don't check against intVal here as conversion of large negative double values
// may be affected by a JIT bug. Subsequent comparisons can safely use intVal
if (x < -746d) {
if (hiPrec != null) {
hiPrec[0] = 0.0;
hiPrec[1] = 0.0;
}
return 0.0;
}
if (intVal < -709) {
/* This will produce a subnormal output */
final double result = exp(x + 40.19140625, extra, hiPrec) / 285040095144011776.0;
if (hiPrec != null) {
hiPrec[0] /= 285040095144011776.0;
hiPrec[1] /= 285040095144011776.0;
}
return result;
}
if (intVal == -709) {
/* exp(1.494140625) is nearly a machine number... */
final double result = exp(x + 1.494140625, extra, hiPrec) / 4.455505956692756620;
if (hiPrec != null) {
hiPrec[0] /= 4.455505956692756620;
hiPrec[1] /= 4.455505956692756620;
}
return result;
}
intVal--;
} else {
if (intVal > 709) {
if (hiPrec != null) {
hiPrec[0] = Double.POSITIVE_INFINITY;
hiPrec[1] = 0.0;
}
return Double.POSITIVE_INFINITY;
}
}
intPartA = ExpIntTable.EXP_INT_TABLE_A[EXP_INT_TABLE_MAX_INDEX + intVal];
intPartB = ExpIntTable.EXP_INT_TABLE_B[EXP_INT_TABLE_MAX_INDEX + intVal];
/* Get the fractional part of x, find the greatest multiple of 2^-10 less than
* x and look up the exp function of it.
* fracPartA will have the upper 22 bits, fracPartB the lower 52 bits.
*/
final int intFrac = (int) ((x - intVal) * 1024.0);
final double fracPartA = ExpFracTable.EXP_FRAC_TABLE_A[intFrac];
final double fracPartB = ExpFracTable.EXP_FRAC_TABLE_B[intFrac];
/* epsilon is the difference in x from the nearest multiple of 2^-10. It
* has a value in the range 0 <= epsilon < 2^-10.
* Do the subtraction from x as the last step to avoid possible loss of precision.
*/
final double epsilon = x - (intVal + intFrac / 1024.0);
/* Compute z = exp(epsilon) - 1.0 via a minimax polynomial. z has
full double precision (52 bits). Since z < 2^-10, we will have
62 bits of precision when combined with the constant 1. This will be
used in the last addition below to get proper rounding. */
/* Remez generated polynomial. Converges on the interval [0, 2^-10], error
is less than 0.5 ULP */
double z = 0.04168701738764507;
z = z * epsilon + 0.1666666505023083;
z = z * epsilon + 0.5000000000042687;
z = z * epsilon + 1.0;
z = z * epsilon + -3.940510424527919E-20;
/* Compute (intPartA+intPartB) * (fracPartA+fracPartB) by binomial
expansion.
tempA is exact since intPartA and intPartB only have 22 bits each.
tempB will have 52 bits of precision.
*/
double tempA = intPartA * fracPartA;
double tempB = intPartA * fracPartB + intPartB * fracPartA + intPartB * fracPartB;
/* Compute the result. (1+z)(tempA+tempB). Order of operations is
important. For accuracy add by increasing size. tempA is exact and
much larger than the others. If there are extra bits specified from the
pow() function, use them. */
final double tempC = tempB + tempA;
// If tempC is positive infinite, the evaluation below could result in NaN,
// because z could be negative at the same time.
if (tempC == Double.POSITIVE_INFINITY) {
return Double.POSITIVE_INFINITY;
}
final double result;
if (extra != 0.0) {
result = tempC * extra * z + tempC * extra + tempC * z + tempB + tempA;
} else {
result = tempC * z + tempB + tempA;
}
if (hiPrec != null) {
// If requesting high precision
hiPrec[0] = tempA;
hiPrec[1] = tempC * extra * z + tempC * extra + tempC * z + tempB;
}
return result;
}
/**Compute exp(x) - 1.
*
* @param x number to compute shifted exponential
* @return exp(x) - 1
*/
public static double expm1(double x) {
return expm1(x, null);
}
/** Internal helper method for expm1.
* @param x number to compute shifted exponential
* @param hiPrecOut receive high precision result for -1.0 < x < 1.0
* @return exp(x) - 1
*/
private static double expm1(double x, double[] hiPrecOut) {
if (Double.isNaN(x) || x == 0.0) { // NaN or zero
return x;
}
if (x <= -1.0 || x >= 1.0) {
// If not between +/- 1.0
//return exp(x) - 1.0;
double[] hiPrec = new double[2];
exp(x, 0.0, hiPrec);
if (x > 0.0) {
return -1.0 + hiPrec[0] + hiPrec[1];
} else {
final double ra = -1.0 + hiPrec[0];
double rb = -(ra + 1.0 - hiPrec[0]);
rb += hiPrec[1];
return ra + rb;
}
}
double baseA;
double baseB;
double epsilon;
boolean negative = false;
if (x < 0.0) {
x = -x;
negative = true;
}
int intFrac = (int) (x * 1024.0);
double tempA = ExpFracTable.EXP_FRAC_TABLE_A[intFrac] - 1.0;
double tempB = ExpFracTable.EXP_FRAC_TABLE_B[intFrac];
double temp = tempA + tempB;
tempB = -(temp - tempA - tempB);
tempA = temp;
temp = tempA * HEX_40000000;
baseA = tempA + temp - temp;
baseB = tempB + (tempA - baseA);
epsilon = x - intFrac / 1024.0;
/* Compute expm1(epsilon) */
double zb = 0.008336750013465571;
zb = zb * epsilon + 0.041666663879186654;
zb = zb * epsilon + 0.16666666666745392;
zb = zb * epsilon + 0.49999999999999994;
zb *= epsilon;
zb *= epsilon;
double za = epsilon;
temp = za + zb;
zb = -(temp - za - zb);
za = temp;
temp = za * HEX_40000000;
temp = za + temp - temp;
zb += za - temp;
za = temp;
/* Combine the parts. expm1(a+b) = expm1(a) + expm1(b) + expm1(a)*expm1(b) */
double ya = za * baseA;
//double yb = za*baseB + zb*baseA + zb*baseB;
temp = ya + za * baseB;
double yb = -(temp - ya - za * baseB);
ya = temp;
temp = ya + zb * baseA;
yb += -(temp - ya - zb * baseA);
ya = temp;
temp = ya + zb * baseB;
yb += -(temp - ya - zb * baseB);
ya = temp;
//ya = ya + za + baseA;
//yb = yb + zb + baseB;
temp = ya + baseA;
yb += -(temp - baseA - ya);
ya = temp;
temp = ya + za;
//yb += (ya > za) ? -(temp - ya - za) : -(temp - za - ya);
yb += -(temp - ya - za);
ya = temp;
temp = ya + baseB;
//yb += (ya > baseB) ? -(temp - ya - baseB) : -(temp - baseB - ya);
yb += -(temp - ya - baseB);
ya = temp;
temp = ya + zb;
//yb += (ya > zb) ? -(temp - ya - zb) : -(temp - zb - ya);
yb += -(temp - ya - zb);
ya = temp;
if (negative) {
/* Compute expm1(-x) = -expm1(x) / (expm1(x) + 1) */
double denom = 1.0 + ya;
double denomr = 1.0 / denom;
double denomb = -(denom - 1.0 - ya) + yb;
double ratio = ya * denomr;
temp = ratio * HEX_40000000;
final double ra = ratio + temp - temp;
double rb = ratio - ra;
temp = denom * HEX_40000000;
za = denom + temp - temp;
zb = denom - za;
rb += (ya - za * ra - za * rb - zb * ra - zb * rb) * denomr;
// f(x) = x/1+x
// Compute f'(x)
// Product rule: d(uv) = du*v + u*dv
// Chain rule: d(f(g(x)) = f'(g(x))*f(g'(x))
// d(1/x) = -1/(x*x)
// d(1/1+x) = -1/( (1+x)^2) * 1 = -1/((1+x)*(1+x))
// d(x/1+x) = -x/((1+x)(1+x)) + 1/1+x = 1 / ((1+x)(1+x))
// Adjust for yb
rb += yb * denomr; // numerator
rb += -ya * denomb * denomr * denomr; // denominator
// negate
ya = -ra;
yb = -rb;
}
if (hiPrecOut != null) {
hiPrecOut[0] = ya;
hiPrecOut[1] = yb;
}
return ya + yb;
}
/**
* Natural logarithm.
*
* @param x a double
* @return log(x)
*/
public static double log(final double x) {
return log(x, null);
}
/**
* Internal helper method for natural logarithm function.
* @param x original argument of the natural logarithm function
* @param hiPrec extra bits of precision on output (To Be Confirmed)
* @return log(x)
*/
private static double log(final double x, final double[] hiPrec) {
if (x == 0) { // Handle special case of +0/-0
return Double.NEGATIVE_INFINITY;
}
long bits = Double.doubleToRawLongBits(x);
/* Handle special cases of negative input, and NaN */
if (((bits & 0x8000000000000000L) != 0 || Double.isNaN(x)) && x != 0.0) {
if (hiPrec != null) {
hiPrec[0] = Double.NaN;
}
return Double.NaN;
}
/* Handle special cases of Positive infinity. */
if (x == Double.POSITIVE_INFINITY) {
if (hiPrec != null) {
hiPrec[0] = Double.POSITIVE_INFINITY;
}
return Double.POSITIVE_INFINITY;
}
/* Extract the exponent */
int exp = (int) (bits >> 52) - 1023;
if ((bits & 0x7ff0000000000000L) == 0) {
// Subnormal!
if (x == 0) {
// Zero
if (hiPrec != null) {
hiPrec[0] = Double.NEGATIVE_INFINITY;
}
return Double.NEGATIVE_INFINITY;
}
/* Normalize the subnormal number. */
bits <<= 1;
while ((bits & 0x0010000000000000L) == 0) {
--exp;
bits <<= 1;
}
}
if ((exp == -1 || exp == 0) && x < 1.01 && x > 0.99 && hiPrec == null) {
/* The normal method doesn't work well in the range [0.99, 1.01], so call do a straight
polynomial expansion in higer precision. */
/* Compute x - 1.0 and split it */
double xa = x - 1.0;
double xb = xa - x + 1.0;
double tmp = xa * HEX_40000000;
double aa = xa + tmp - tmp;
double ab = xa - aa;
xa = aa;
xb = ab;
final double[] lnCoef_last = LN_QUICK_COEF[LN_QUICK_COEF.length - 1];
double ya = lnCoef_last[0];
double yb = lnCoef_last[1];
for (int i = LN_QUICK_COEF.length - 2; i >= 0; i--) {
/* Multiply a = y * x */
aa = ya * xa;
ab = ya * xb + yb * xa + yb * xb;
/* split, so now y = a */
tmp = aa * HEX_40000000;
ya = aa + tmp - tmp;
yb = aa - ya + ab;
/* Add a = y + lnQuickCoef */
final double[] lnCoef_i = LN_QUICK_COEF[i];
aa = ya + lnCoef_i[0];
ab = yb + lnCoef_i[1];
/* Split y = a */
tmp = aa * HEX_40000000;
ya = aa + tmp - tmp;
yb = aa - ya + ab;
}
/* Multiply a = y * x */
aa = ya * xa;
ab = ya * xb + yb * xa + yb * xb;
/* split, so now y = a */
tmp = aa * HEX_40000000;
ya = aa + tmp - tmp;
yb = aa - ya + ab;
return ya + yb;
}
// lnm is a log of a number in the range of 1.0 - 2.0, so 0 <= lnm < ln(2)
final double[] lnm = lnMant.LN_MANT[(int)((bits & 0x000ffc0000000000L) >> 42)];
/*
double epsilon = x / Double.longBitsToDouble(bits & 0xfffffc0000000000L);
epsilon -= 1.0;
*/
// y is the most significant 10 bits of the mantissa
//double y = Double.longBitsToDouble(bits & 0xfffffc0000000000L);
//double epsilon = (x - y) / y;
final double epsilon = (bits & 0x3ffffffffffL) / (TWO_POWER_52 + (bits & 0x000ffc0000000000L));
double lnza = 0.0;
double lnzb = 0.0;
if (hiPrec != null) {
/* split epsilon -> x */
double tmp = epsilon * HEX_40000000;
double aa = epsilon + tmp - tmp;
double ab = epsilon - aa;
double xa = aa;
double xb = ab;
/* Need a more accurate epsilon, so adjust the division. */
final double numer = bits & 0x3ffffffffffL;
final double denom = TWO_POWER_52 + (bits & 0x000ffc0000000000L);
aa = numer - xa * denom - xb * denom;
xb += aa / denom;
/* Remez polynomial evaluation */
final double[] lnCoef_last = LN_HI_PREC_COEF[LN_HI_PREC_COEF.length - 1];
double ya = lnCoef_last[0];
double yb = lnCoef_last[1];
for (int i = LN_HI_PREC_COEF.length - 2; i >= 0; i--) {
/* Multiply a = y * x */
aa = ya * xa;
ab = ya * xb + yb * xa + yb * xb;
/* split, so now y = a */
tmp = aa * HEX_40000000;
ya = aa + tmp - tmp;
yb = aa - ya + ab;
/* Add a = y + lnHiPrecCoef */
final double[] lnCoef_i = LN_HI_PREC_COEF[i];
aa = ya + lnCoef_i[0];
ab = yb + lnCoef_i[1];
/* Split y = a */
tmp = aa * HEX_40000000;
ya = aa + tmp - tmp;
yb = aa - ya + ab;
}
/* Multiply a = y * x */
aa = ya * xa;
ab = ya * xb + yb * xa + yb * xb;
/* split, so now lnz = a */
/*
tmp = aa * 1073741824.0;
lnza = aa + tmp - tmp;
lnzb = aa - lnza + ab;
*/
lnza = aa + ab;
lnzb = -(lnza - aa - ab);
} else {
/* High precision not required. Eval Remez polynomial
using standard double precision */
lnza = -0.16624882440418567;
lnza = lnza * epsilon + 0.19999954120254515;
lnza = lnza * epsilon + -0.2499999997677497;
lnza = lnza * epsilon + 0.3333333333332802;
lnza = lnza * epsilon + -0.5;
lnza = lnza * epsilon + 1.0;
lnza *= epsilon;
}
/* Relative sizes:
* lnzb [0, 2.33E-10]
* lnm[1] [0, 1.17E-7]
* ln2B*exp [0, 1.12E-4]
* lnza [0, 9.7E-4]
* lnm[0] [0, 0.692]
* ln2A*exp [0, 709]
*/
/* Compute the following sum:
* lnzb + lnm[1] + ln2B*exp + lnza + lnm[0] + ln2A*exp;
*/
//return lnzb + lnm[1] + ln2B*exp + lnza + lnm[0] + ln2A*exp;
double a = LN_2_A * exp;
double b = 0.0;
double c = a + lnm[0];
double d = -(c - a - lnm[0]);
a = c;
b += d;
c = a + lnza;
d = -(c - a - lnza);
a = c;
b += d;
c = a + LN_2_B * exp;
d = -(c - a - LN_2_B * exp);
a = c;
b += d;
c = a + lnm[1];
d = -(c - a - lnm[1]);
a = c;
b += d;
c = a + lnzb;
d = -(c - a - lnzb);
a = c;
b += d;
if (hiPrec != null) {
hiPrec[0] = a;
hiPrec[1] = b;
}
return a + b;
}
/**
* Computes log(1 + x).
*
* @param x Number.
* @return {@code log(1 + x)}.
*/
public static double log1p(final double x) {
if (x == -1) {
return Double.NEGATIVE_INFINITY;
}
if (x == Double.POSITIVE_INFINITY) {
return Double.POSITIVE_INFINITY;
}
if (x > 1e-6 ||
x < -1e-6) {
final double xpa = 1 + x;
final double xpb = -(xpa - 1 - x);
final double[] hiPrec = new double[2];
final double lores = log(xpa, hiPrec);
if (Double.isInfinite(lores)) { // Don't allow this to be converted to NaN
return lores;
}
// Do a taylor series expansion around xpa:
// f(x+y) = f(x) + f'(x) y + f''(x)/2 y^2
final double fx1 = xpb / xpa;
final double epsilon = 0.5 * fx1 + 1;
return epsilon * fx1 + hiPrec[1] + hiPrec[0];
} else {
// Value is small |x| < 1e6, do a Taylor series centered on 1.
final double y = (x * F_1_3 - F_1_2) * x + 1;
return y * x;
}
}
/** Compute the base 10 logarithm.
* @param x a number
* @return log10(x)
*/
public static double log10(final double x) {
final double[] hiPrec = new double[2];
final double lores = log(x, hiPrec);
if (Double.isInfinite(lores)) { // don't allow this to be converted to NaN
return lores;
}
final double tmp = hiPrec[0] * HEX_40000000;
final double lna = hiPrec[0] + tmp - tmp;
final double lnb = hiPrec[0] - lna + hiPrec[1];
final double rln10a = 0.4342944622039795;
final double rln10b = 1.9699272335463627E-8;
return rln10b * lnb + rln10b * lna + rln10a * lnb + rln10a * lna;
}
/**
* Computes the <a href="http://mathworld.wolfram.com/Logarithm.html">
* logarithm</a> in a given base.
*
* Returns {@code NaN} if either argument is negative.
* If {@code base} is 0 and {@code x} is positive, 0 is returned.
* If {@code base} is positive and {@code x} is 0,
* {@code Double.NEGATIVE_INFINITY} is returned.
* If both arguments are 0, the result is {@code NaN}.
*
* @param base Base of the logarithm, must be greater than 0.
* @param x Argument, must be greater than 0.
* @return the value of the logarithm, i.e. the number {@code y} such that
* <code>base<sup>y</sup> = x</code>.
* @since 3.0
*/
public static double log(double base, double x) {
return log(x) / log(base);
}
/**
* Power function. Compute x^y.
*
* @param x a double
* @param y a double
* @return double
*/
public static double pow(final double x, final double y) {
if (y == 0) {
// y = -0 or y = +0
return 1.0;
} else {
final long yBits = Double.doubleToRawLongBits(y);
final int yRawExp = (int) ((yBits & MASK_DOUBLE_EXPONENT) >> 52);
final long yRawMantissa = yBits & MASK_DOUBLE_MANTISSA;
final long xBits = Double.doubleToRawLongBits(x);
final int xRawExp = (int) ((xBits & MASK_DOUBLE_EXPONENT) >> 52);
final long xRawMantissa = xBits & MASK_DOUBLE_MANTISSA;
if (yRawExp > 1085) {
// y is either a very large integral value that does not fit in a long or it is a special number
if ((yRawExp == 2047 && yRawMantissa != 0) ||
(xRawExp == 2047 && xRawMantissa != 0)) {
// NaN
return Double.NaN;
} else if (xRawExp == 1023 && xRawMantissa == 0) {
// x = -1.0 or x = +1.0
if (yRawExp == 2047) {
// y is infinite
return Double.NaN;
} else {
// y is a large even integer
return 1.0;
}
} else {
// the absolute value of x is either greater or smaller than 1.0
// if yRawExp == 2047 and mantissa is 0, y = -infinity or y = +infinity
// if 1085 < yRawExp < 2047, y is simply a large number, however, due to limited
// accuracy, at this magnitude it behaves just like infinity with regards to x
if ((y > 0) ^ (xRawExp < 1023)) {
// either y = +infinity (or large engouh) and abs(x) > 1.0
// or y = -infinity (or large engouh) and abs(x) < 1.0
return Double.POSITIVE_INFINITY;
} else {
// either y = +infinity (or large engouh) and abs(x) < 1.0
// or y = -infinity (or large engouh) and abs(x) > 1.0
return +0.0;
}
}
} else {
// y is a regular non-zero number
if (yRawExp >= 1023) {
// y may be an integral value, which should be handled specifically
final long yFullMantissa = IMPLICIT_HIGH_BIT | yRawMantissa;
if (yRawExp < 1075) {
// normal number with negative shift that may have a fractional part
final long integralMask = (-1L) << (1075 - yRawExp);
if ((yFullMantissa & integralMask) == yFullMantissa) {
// all fractional bits are 0, the number is really integral
final long l = yFullMantissa >> (1075 - yRawExp);
return AccurateMath.pow(x, (y < 0) ? -l : l);
}
} else {
// normal number with positive shift, always an integral value
// we know it fits in a primitive long because yRawExp > 1085 has been handled above
final long l = yFullMantissa << (yRawExp - 1075);
return AccurateMath.pow(x, (y < 0) ? -l : l);
}
}
// y is a non-integral value
if (x == 0) {
// x = -0 or x = +0
// the integer powers have already been handled above
return y < 0 ? Double.POSITIVE_INFINITY : +0.0;
} else if (xRawExp == 2047) {
if (xRawMantissa == 0) {
// x = -infinity or x = +infinity
return (y < 0) ? +0.0 : Double.POSITIVE_INFINITY;
} else {
// NaN
return Double.NaN;
}
} else if (x < 0) {
// the integer powers have already been handled above
return Double.NaN;
} else {
// this is the general case, for regular fractional numbers x and y
// Split y into ya and yb such that y = ya+yb
final double tmp = y * HEX_40000000;
final double ya = (y + tmp) - tmp;
final double yb = y - ya;
/* Compute ln(x) */
final double[] lns = new double[2];
final double lores = log(x, lns);
if (Double.isInfinite(lores)) { // don't allow this to be converted to NaN
return lores;
}
double lna = lns[0];
double lnb = lns[1];
/* resplit lns */
final double tmp1 = lna * HEX_40000000;
final double tmp2 = (lna + tmp1) - tmp1;
lnb += lna - tmp2;
lna = tmp2;
// y*ln(x) = (aa+ab)
final double aa = lna * ya;
final double ab = lna * yb + lnb * ya + lnb * yb;
lna = aa + ab;
lnb = -(lna - aa - ab);
double z = 1.0 / 120.0;
z = z * lnb + (1.0 / 24.0);
z = z * lnb + (1.0 / 6.0);
z = z * lnb + 0.5;
z = z * lnb + 1.0;
z *= lnb;
final double result = exp(lna, z, null);
//result = result + result * z;
return result;
}
}
}
}
/**
* Raise a double to an int power.
*
* @param d Number to raise.
* @param e Exponent.
* @return d<sup>e</sup>
* @since 3.1
*/
public static double pow(double d, int e) {
return pow(d, (long) e);
}
/**
* Raise a double to a long power.
*
* @param d Number to raise.
* @param e Exponent.
* @return d<sup>e</sup>
* @since 3.6
*/
public static double pow(double d, long e) {
if (e == 0) {
return 1.0;
} else if (e > 0) {
return new Split(d).pow(e).full;
} else {
return new Split(d).reciprocal().pow(-e).full;
}
}
/** Class operator on double numbers split into one 26 bits number and one 27 bits number. */
private static class Split {
/** Split version of NaN. */
public static final Split NAN = new Split(Double.NaN, 0);
/** Split version of positive infinity. */
public static final Split POSITIVE_INFINITY = new Split(Double.POSITIVE_INFINITY, 0);
/** Split version of negative infinity. */
public static final Split NEGATIVE_INFINITY = new Split(Double.NEGATIVE_INFINITY, 0);
/** Full number. */
private final double full;
/** High order bits. */
private final double high;
/** Low order bits. */
private final double low;
/** Simple constructor.
* @param x number to split
*/
Split(final double x) {
full = x;
high = Double.longBitsToDouble(Double.doubleToRawLongBits(x) & ((-1L) << 27));
low = x - high;
}
/** Simple constructor.
* @param high high order bits
* @param low low order bits
*/
Split(final double high, final double low) {
this(high == 0.0 ? (low == 0.0 && Double.doubleToRawLongBits(high) == Long.MIN_VALUE /* negative zero */ ? -0.0 : low) : high + low, high, low);
}
/** Simple constructor.
* @param full full number
* @param high high order bits
* @param low low order bits
*/
Split(final double full, final double high, final double low) {
this.full = full;
this.high = high;
this.low = low;
}
/** Multiply the instance by another one.
* @param b other instance to multiply by
* @return product
*/
public Split multiply(final Split b) {
// beware the following expressions must NOT be simplified, they rely on floating point arithmetic properties
final Split mulBasic = new Split(full * b.full);
final double mulError = low * b.low - (((mulBasic.full - high * b.high) - low * b.high) - high * b.low);
return new Split(mulBasic.high, mulBasic.low + mulError);
}
/** Compute the reciprocal of the instance.
* @return reciprocal of the instance
*/
public Split reciprocal() {
final double approximateInv = 1.0 / full;
final Split splitInv = new Split(approximateInv);
// if 1.0/d were computed perfectly, remultiplying it by d should give 1.0
// we want to estimate the error so we can fix the low order bits of approximateInvLow
// beware the following expressions must NOT be simplified, they rely on floating point arithmetic properties
final Split product = multiply(splitInv);
final double error = (product.high - 1) + product.low;
// better accuracy estimate of reciprocal
return Double.isNaN(error) ? splitInv : new Split(splitInv.high, splitInv.low - error / full);
}
/** Computes this^e.
* @param e exponent (beware, here it MUST be > 0; the only exclusion is Long.MIN_VALUE)
* @return d^e, split in high and low bits
* @since 3.6
*/
private Split pow(final long e) {
// prepare result
Split result = new Split(1);
// d^(2p)
Split d2p = new Split(full, high, low);
for (long p = e; p != 0; p >>>= 1) {
if ((p & 0x1) != 0) {
// accurate multiplication result = result * d^(2p) using Veltkamp TwoProduct algorithm
result = result.multiply(d2p);
}
// accurate squaring d^(2(p+1)) = d^(2p) * d^(2p) using Veltkamp TwoProduct algorithm
d2p = d2p.multiply(d2p);
}
if (Double.isNaN(result.full)) {
if (Double.isNaN(full)) {
return Split.NAN;
} else {
// some intermediate numbers exceeded capacity,
// and the low order bits became NaN (because infinity - infinity = NaN)
if (AccurateMath.abs(full) < 1) {
return new Split(AccurateMath.copySign(0.0, full), 0.0);
} else if (full < 0 && (e & 0x1) == 1) {
return Split.NEGATIVE_INFINITY;
} else {
return Split.POSITIVE_INFINITY;
}
}
} else {
return result;
}
}
}
/**
* Computes sin(x) - x, where |x| < 1/16.
* Use a Remez polynomial approximation.
* @param x a number smaller than 1/16
* @return sin(x) - x
*/
private static double polySine(final double x) {
double x2 = x * x;
double p = 2.7553817452272217E-6;
p = p * x2 + -1.9841269659586505E-4;
p = p * x2 + 0.008333333333329196;
p = p * x2 + -0.16666666666666666;
//p *= x2;
//p *= x;
p = p * x2 * x;
return p;
}
/**
* Computes cos(x) - 1, where |x| < 1/16.
* Use a Remez polynomial approximation.
* @param x a number smaller than 1/16
* @return cos(x) - 1
*/
private static double polyCosine(double x) {
double x2 = x * x;
double p = 2.479773539153719E-5;
p = p * x2 + -0.0013888888689039883;
p = p * x2 + 0.041666666666621166;
p = p * x2 + -0.49999999999999994;
p *= x2;
return p;
}
/**
* Compute sine over the first quadrant (0 < x < pi/2).
* Use combination of table lookup and rational polynomial expansion.
* @param xa number from which sine is requested
* @param xb extra bits for x (may be 0.0)
* @return sin(xa + xb)
*/
private static double sinQ(double xa, double xb) {
int idx = (int) ((xa * 8.0) + 0.5);
final double epsilon = xa - EIGHTHS[idx]; //idx*0.125;
// Table lookups
final double sintA = SINE_TABLE_A[idx];
final double sintB = SINE_TABLE_B[idx];
final double costA = COSINE_TABLE_A[idx];
final double costB = COSINE_TABLE_B[idx];
// Polynomial eval of sin(epsilon), cos(epsilon)
double sinEpsA = epsilon;
double sinEpsB = polySine(epsilon);
final double cosEpsA = 1.0;
final double cosEpsB = polyCosine(epsilon);
// Split epsilon xa + xb = x
final double temp = sinEpsA * HEX_40000000;
double temp2 = (sinEpsA + temp) - temp;
sinEpsB += sinEpsA - temp2;
sinEpsA = temp2;
/* Compute sin(x) by angle addition formula */
double result;
/* Compute the following sum:
*
* result = sintA + costA*sinEpsA + sintA*cosEpsB + costA*sinEpsB +
* sintB + costB*sinEpsA + sintB*cosEpsB + costB*sinEpsB;
*
* Ranges of elements
*
* xxxtA 0 PI/2
* xxxtB -1.5e-9 1.5e-9
* sinEpsA -0.0625 0.0625
* sinEpsB -6e-11 6e-11
* cosEpsA 1.0
* cosEpsB 0 -0.0625
*
*/
//result = sintA + costA*sinEpsA + sintA*cosEpsB + costA*sinEpsB +
// sintB + costB*sinEpsA + sintB*cosEpsB + costB*sinEpsB;
//result = sintA + sintA*cosEpsB + sintB + sintB * cosEpsB;
//result += costA*sinEpsA + costA*sinEpsB + costB*sinEpsA + costB * sinEpsB;
double a = 0;
double b = 0;
double t = sintA;
double c = a + t;
double d = -(c - a - t);
a = c;
b += d;
t = costA * sinEpsA;
c = a + t;
d = -(c - a - t);
a = c;
b += d;
b = b + sintA * cosEpsB + costA * sinEpsB;
/*
t = sintA*cosEpsB;
c = a + t;
d = -(c - a - t);
a = c;
b = b + d;
t = costA*sinEpsB;
c = a + t;
d = -(c - a - t);
a = c;
b = b + d;
*/
b = b + sintB + costB * sinEpsA + sintB * cosEpsB + costB * sinEpsB;
/*
t = sintB;
c = a + t;
d = -(c - a - t);
a = c;
b = b + d;
t = costB*sinEpsA;
c = a + t;
d = -(c - a - t);
a = c;
b = b + d;
t = sintB*cosEpsB;
c = a + t;
d = -(c - a - t);
a = c;
b = b + d;
t = costB*sinEpsB;
c = a + t;
d = -(c - a - t);
a = c;
b = b + d;
*/
if (xb != 0.0) {
t = ((costA + costB) * (cosEpsA + cosEpsB) -
(sintA + sintB) * (sinEpsA + sinEpsB)) * xb; // approximate cosine*xb
c = a + t;
d = -(c - a - t);
a = c;
b += d;
}
result = a + b;
return result;
}
/**
* Compute cosine in the first quadrant by subtracting input from PI/2 and
* then calling sinQ. This is more accurate as the input approaches PI/2.
* @param xa number from which cosine is requested
* @param xb extra bits for x (may be 0.0)
* @return cos(xa + xb)
*/
private static double cosQ(double xa, double xb) {
final double pi2a = 1.5707963267948966;
final double pi2b = 6.123233995736766E-17;
final double a = pi2a - xa;
double b = -(a - pi2a + xa);
b += pi2b - xb;
return sinQ(a, b);
}
/**
* Compute tangent (or cotangent) over the first quadrant. 0 < x < pi/2
* Use combination of table lookup and rational polynomial expansion.
* @param xa number from which sine is requested
* @param xb extra bits for x (may be 0.0)
* @param cotanFlag if true, compute the cotangent instead of the tangent
* @return tan(xa+xb) (or cotangent, depending on cotanFlag)
*/
private static double tanQ(double xa, double xb, boolean cotanFlag) {
int idx = (int) ((xa * 8.0) + 0.5);
final double epsilon = xa - EIGHTHS[idx]; //idx*0.125;
// Table lookups
final double sintA = SINE_TABLE_A[idx];
final double sintB = SINE_TABLE_B[idx];
final double costA = COSINE_TABLE_A[idx];
final double costB = COSINE_TABLE_B[idx];
// Polynomial eval of sin(epsilon), cos(epsilon)
double sinEpsA = epsilon;
double sinEpsB = polySine(epsilon);
final double cosEpsA = 1.0;
final double cosEpsB = polyCosine(epsilon);
// Split epsilon xa + xb = x
double temp = sinEpsA * HEX_40000000;
double temp2 = (sinEpsA + temp) - temp;
sinEpsB += sinEpsA - temp2;
sinEpsA = temp2;
/* Compute sin(x) by angle addition formula */
/* Compute the following sum:
*
* result = sintA + costA*sinEpsA + sintA*cosEpsB + costA*sinEpsB +
* sintB + costB*sinEpsA + sintB*cosEpsB + costB*sinEpsB;
*
* Ranges of elements
*
* xxxtA 0 PI/2
* xxxtB -1.5e-9 1.5e-9
* sinEpsA -0.0625 0.0625
* sinEpsB -6e-11 6e-11
* cosEpsA 1.0
* cosEpsB 0 -0.0625
*
*/
//result = sintA + costA*sinEpsA + sintA*cosEpsB + costA*sinEpsB +
// sintB + costB*sinEpsA + sintB*cosEpsB + costB*sinEpsB;
//result = sintA + sintA*cosEpsB + sintB + sintB * cosEpsB;
//result += costA*sinEpsA + costA*sinEpsB + costB*sinEpsA + costB * sinEpsB;
double a = 0;
double b = 0;
// Compute sine
double t = sintA;
double c = a + t;
double d = -(c - a - t);
a = c;
b += d;
t = costA * sinEpsA;
c = a + t;
d = -(c - a - t);
a = c;
b += d;
b += sintA * cosEpsB + costA * sinEpsB;
b += sintB + costB * sinEpsA + sintB * cosEpsB + costB * sinEpsB;
double sina = a + b;
double sinb = -(sina - a - b);
// Compute cosine
a = b = c = d = 0.0;
t = costA * cosEpsA;
c = a + t;
d = -(c - a - t);
a = c;
b += d;
t = -sintA * sinEpsA;
c = a + t;
d = -(c - a - t);
a = c;
b += d;
b += costB * cosEpsA + costA * cosEpsB + costB * cosEpsB;
b -= sintB * sinEpsA + sintA * sinEpsB + sintB * sinEpsB;
double cosa = a + b;
double cosb = -(cosa - a - b);
if (cotanFlag) {
double tmp;
tmp = cosa; cosa = sina; sina = tmp;
tmp = cosb; cosb = sinb; sinb = tmp;
}
/* estimate and correct, compute 1.0/(cosa+cosb) */
/*
double est = (sina+sinb)/(cosa+cosb);
double err = (sina - cosa*est) + (sinb - cosb*est);
est += err/(cosa+cosb);
err = (sina - cosa*est) + (sinb - cosb*est);
*/
// f(x) = 1/x, f'(x) = -1/x^2
double est = sina / cosa;
/* Split the estimate to get more accurate read on division rounding */
temp = est * HEX_40000000;
double esta = (est + temp) - temp;
double estb = est - esta;
temp = cosa * HEX_40000000;
double cosaa = (cosa + temp) - temp;
double cosab = cosa - cosaa;
//double err = (sina - est*cosa)/cosa; // Correction for division rounding
double err = (sina - esta * cosaa - esta * cosab - estb * cosaa - estb * cosab) / cosa; // Correction for division rounding
err += sinb / cosa; // Change in est due to sinb
err += -sina * cosb / cosa / cosa; // Change in est due to cosb
if (xb != 0.0) {
// tan' = 1 + tan^2 cot' = -(1 + cot^2)
// Approximate impact of xb
double xbadj = xb + est * est * xb;
if (cotanFlag) {
xbadj = -xbadj;
}
err += xbadj;
}
return est + err;
}
/** Reduce the input argument using the Payne and Hanek method.
* This is good for all inputs 0.0 < x < inf
* Output is remainder after dividing by PI/2
* The result array should contain 3 numbers.
* result[0] is the integer portion, so mod 4 this gives the quadrant.
* result[1] is the upper bits of the remainder
* result[2] is the lower bits of the remainder
*
* @param x number to reduce
* @param result placeholder where to put the result
*/
private static void reducePayneHanek(double x, double[] result) {
/* Convert input double to bits */
long inbits = Double.doubleToRawLongBits(x);
int exponent = (int) ((inbits >> 52) & 0x7ff) - 1023;
/* Convert to fixed point representation */
inbits &= 0x000fffffffffffffL;
inbits |= 0x0010000000000000L;
/* Normalize input to be between 0.5 and 1.0 */
exponent++;
inbits <<= 11;
/* Based on the exponent, get a shifted copy of recip2pi */
long shpi0;
long shpiA;
long shpiB;
int idx = exponent >> 6;
int shift = exponent - (idx << 6);
if (shift != 0) {
shpi0 = (idx == 0) ? 0 : (RECIP_2PI[idx - 1] << shift);
shpi0 |= RECIP_2PI[idx] >>> (64 - shift);
shpiA = (RECIP_2PI[idx] << shift) | (RECIP_2PI[idx + 1] >>> (64 - shift));
shpiB = (RECIP_2PI[idx + 1] << shift) | (RECIP_2PI[idx + 2] >>> (64 - shift));
} else {
shpi0 = (idx == 0) ? 0 : RECIP_2PI[idx - 1];
shpiA = RECIP_2PI[idx];
shpiB = RECIP_2PI[idx + 1];
}
/* Multiply input by shpiA */
long a = inbits >>> 32;
long b = inbits & 0xffffffffL;
long c = shpiA >>> 32;
long d = shpiA & 0xffffffffL;
long ac = a * c;
long bd = b * d;
long bc = b * c;
long ad = a * d;
long prodB = bd + (ad << 32);
long prodA = ac + (ad >>> 32);
boolean bita = (bd & 0x8000000000000000L) != 0;
boolean bitb = (ad & 0x80000000L) != 0;
boolean bitsum = (prodB & 0x8000000000000000L) != 0;
/* Carry */
if ((bita && bitb) ||
((bita || bitb) && !bitsum)) {
prodA++;
}
bita = (prodB & 0x8000000000000000L) != 0;
bitb = (bc & 0x80000000L) != 0;
prodB += bc << 32;
prodA += bc >>> 32;
bitsum = (prodB & 0x8000000000000000L) != 0;
/* Carry */
if ((bita && bitb) ||
((bita || bitb) && !bitsum)) {
prodA++;
}
/* Multiply input by shpiB */
c = shpiB >>> 32;
d = shpiB & 0xffffffffL;
ac = a * c;
bc = b * c;
ad = a * d;
/* Collect terms */
ac += (bc + ad) >>> 32;
bita = (prodB & 0x8000000000000000L) != 0;
bitb = (ac & 0x8000000000000000L) != 0;
prodB += ac;
bitsum = (prodB & 0x8000000000000000L) != 0;
/* Carry */
if ((bita && bitb) ||
((bita || bitb) && !bitsum)) {
prodA++;
}
/* Multiply by shpi0 */
c = shpi0 >>> 32;
d = shpi0 & 0xffffffffL;
bd = b * d;
bc = b * c;
ad = a * d;
prodA += bd + ((bc + ad) << 32);
/*
* prodA, prodB now contain the remainder as a fraction of PI. We want this as a fraction of
* PI/2, so use the following steps:
* 1.) multiply by 4.
* 2.) do a fixed point muliply by PI/4.
* 3.) Convert to floating point.
* 4.) Multiply by 2
*/
/* This identifies the quadrant */
int intPart = (int)(prodA >>> 62);
/* Multiply by 4 */
prodA <<= 2;
prodA |= prodB >>> 62;
prodB <<= 2;
/* Multiply by PI/4 */
a = prodA >>> 32;
b = prodA & 0xffffffffL;
c = PI_O_4_BITS[0] >>> 32;
d = PI_O_4_BITS[0] & 0xffffffffL;
ac = a * c;
bd = b * d;
bc = b * c;
ad = a * d;
long prod2B = bd + (ad << 32);
long prod2A = ac + (ad >>> 32);
bita = (bd & 0x8000000000000000L) != 0;
bitb = (ad & 0x80000000L) != 0;
bitsum = (prod2B & 0x8000000000000000L) != 0;
/* Carry */
if ((bita && bitb) ||
((bita || bitb) && !bitsum)) {
prod2A++;
}
bita = (prod2B & 0x8000000000000000L) != 0;
bitb = (bc & 0x80000000L) != 0;
prod2B += bc << 32;
prod2A += bc >>> 32;
bitsum = (prod2B & 0x8000000000000000L) != 0;
/* Carry */
if ((bita && bitb) ||
((bita || bitb) && !bitsum)) {
prod2A++;
}
/* Multiply input by pio4bits[1] */
c = PI_O_4_BITS[1] >>> 32;
d = PI_O_4_BITS[1] & 0xffffffffL;
ac = a * c;
bc = b * c;
ad = a * d;
/* Collect terms */
ac += (bc + ad) >>> 32;
bita = (prod2B & 0x8000000000000000L) != 0;
bitb = (ac & 0x8000000000000000L) != 0;
prod2B += ac;
bitsum = (prod2B & 0x8000000000000000L) != 0;
/* Carry */
if ((bita && bitb) ||
((bita || bitb) && !bitsum)) {
prod2A++;
}
/* Multiply inputB by pio4bits[0] */
a = prodB >>> 32;
b = prodB & 0xffffffffL;
c = PI_O_4_BITS[0] >>> 32;
d = PI_O_4_BITS[0] & 0xffffffffL;
ac = a * c;
bc = b * c;
ad = a * d;
/* Collect terms */
ac += (bc + ad) >>> 32;
bita = (prod2B & 0x8000000000000000L) != 0;
bitb = (ac & 0x8000000000000000L) != 0;
prod2B += ac;
bitsum = (prod2B & 0x8000000000000000L) != 0;
/* Carry */
if ((bita && bitb) ||
((bita || bitb) && !bitsum)) {
prod2A++;
}
/* Convert to double */
double tmpA = (prod2A >>> 12) / TWO_POWER_52; // High order 52 bits
double tmpB = (((prod2A & 0xfffL) << 40) + (prod2B >>> 24)) / TWO_POWER_52 / TWO_POWER_52; // Low bits
double sumA = tmpA + tmpB;
double sumB = -(sumA - tmpA - tmpB);
/* Multiply by PI/2 and return */
result[0] = intPart;
result[1] = sumA * 2.0;
result[2] = sumB * 2.0;
}
/**
* Sine function.
*
* @param x Argument.
* @return sin(x)
*/
public static double sin(double x) {
boolean negative = false;
int quadrant = 0;
double xa;
double xb = 0.0;
/* Take absolute value of the input */
xa = x;
if (x < 0) {
negative = true;
xa = -xa;
}
/* Check for zero and negative zero */
if (xa == 0.0) {
long bits = Double.doubleToRawLongBits(x);
if (bits < 0) {
return -0.0;
}
return 0.0;
}
if (xa != xa || xa == Double.POSITIVE_INFINITY) {
return Double.NaN;
}
/* Perform any argument reduction */
if (xa > 3294198.0) {
// PI * (2**20)
// Argument too big for CodyWaite reduction. Must use
// PayneHanek.
double[] reduceResults = new double[3];
reducePayneHanek(xa, reduceResults);
quadrant = ((int) reduceResults[0]) & 3;
xa = reduceResults[1];
xb = reduceResults[2];
} else if (xa > 1.5707963267948966) {
final CodyWaite cw = new CodyWaite(xa);
quadrant = cw.getK() & 3;
xa = cw.getRemA();
xb = cw.getRemB();
}
if (negative) {
quadrant ^= 2; // Flip bit 1
}
switch (quadrant) {
case 0:
return sinQ(xa, xb);
case 1:
return cosQ(xa, xb);
case 2:
return -sinQ(xa, xb);
case 3:
return -cosQ(xa, xb);
default:
return Double.NaN;
}
}
/**
* Cosine function.
*
* @param x Argument.
* @return cos(x)
*/
public static double cos(double x) {
int quadrant = 0;
/* Take absolute value of the input */
double xa = x;
if (x < 0) {
xa = -xa;
}
if (xa != xa || xa == Double.POSITIVE_INFINITY) {
return Double.NaN;
}
/* Perform any argument reduction */
double xb = 0;
if (xa > 3294198.0) {
// PI * (2**20)
// Argument too big for CodyWaite reduction. Must use
// PayneHanek.
double[] reduceResults = new double[3];
reducePayneHanek(xa, reduceResults);
quadrant = ((int) reduceResults[0]) & 3;
xa = reduceResults[1];
xb = reduceResults[2];
} else if (xa > 1.5707963267948966) {
final CodyWaite cw = new CodyWaite(xa);
quadrant = cw.getK() & 3;
xa = cw.getRemA();
xb = cw.getRemB();
}
//if (negative)
// quadrant = (quadrant + 2) % 4;
switch (quadrant) {
case 0:
return cosQ(xa, xb);
case 1:
return -sinQ(xa, xb);
case 2:
return -cosQ(xa, xb);
case 3:
return sinQ(xa, xb);
default:
return Double.NaN;
}
}
/**
* Tangent function.
*
* @param x Argument.
* @return tan(x)
*/
public static double tan(double x) {
boolean negative = false;
int quadrant = 0;
/* Take absolute value of the input */
double xa = x;
if (x < 0) {
negative = true;
xa = -xa;
}
/* Check for zero and negative zero */
if (xa == 0.0) {
long bits = Double.doubleToRawLongBits(x);
if (bits < 0) {
return -0.0;
}
return 0.0;
}
if (xa != xa || xa == Double.POSITIVE_INFINITY) {
return Double.NaN;
}
/* Perform any argument reduction */
double xb = 0;
if (xa > 3294198.0) {
// PI * (2**20)
// Argument too big for CodyWaite reduction. Must use
// PayneHanek.
double[] reduceResults = new double[3];
reducePayneHanek(xa, reduceResults);
quadrant = ((int) reduceResults[0]) & 3;
xa = reduceResults[1];
xb = reduceResults[2];
} else if (xa > 1.5707963267948966) {
final CodyWaite cw = new CodyWaite(xa);
quadrant = cw.getK() & 3;
xa = cw.getRemA();
xb = cw.getRemB();
}
if (xa > 1.5) {
// Accuracy suffers between 1.5 and PI/2
final double pi2a = 1.5707963267948966;
final double pi2b = 6.123233995736766E-17;
final double a = pi2a - xa;
double b = -(a - pi2a + xa);
b += pi2b - xb;
xa = a + b;
xb = -(xa - a - b);
quadrant ^= 1;
negative ^= true;
}
double result;
if ((quadrant & 1) == 0) {
result = tanQ(xa, xb, false);
} else {
result = -tanQ(xa, xb, true);
}
if (negative) {
result = -result;
}
return result;
}
/**
* Arctangent function.
* @param x a number
* @return atan(x)
*/
public static double atan(double x) {
return atan(x, 0.0, false);
}
/** Internal helper function to compute arctangent.
* @param xa number from which arctangent is requested
* @param xb extra bits for x (may be 0.0)
* @param leftPlane if true, result angle must be put in the left half plane
* @return atan(xa + xb) (or angle shifted by {@code PI} if leftPlane is true)
*/
private static double atan(double xa, double xb, boolean leftPlane) {
if (xa == 0.0) { // Matches +/- 0.0; return correct sign
return leftPlane ? copySign(Math.PI, xa) : xa;
}
final boolean negate;
if (xa < 0) {
// negative
xa = -xa;
xb = -xb;
negate = true;
} else {
negate = false;
}
if (xa > 1.633123935319537E16) { // Very large input
return (negate ^ leftPlane) ? (-Math.PI * F_1_2) : (Math.PI * F_1_2);
}
/* Estimate the closest tabulated arctan value, compute eps = xa-tangentTable */
final int idx;
if (xa < 1) {
idx = (int) (((-1.7168146928204136 * xa * xa + 8.0) * xa) + 0.5);
} else {
final double oneOverXa = 1 / xa;
idx = (int) (-((-1.7168146928204136 * oneOverXa * oneOverXa + 8.0) * oneOverXa) + 13.07);
}
final double ttA = TANGENT_TABLE_A[idx];
final double ttB = TANGENT_TABLE_B[idx];
double epsA = xa - ttA;
double epsB = -(epsA - xa + ttA);
epsB += xb - ttB;
double temp = epsA + epsB;
epsB = -(temp - epsA - epsB);
epsA = temp;
/* Compute eps = eps / (1.0 + xa*tangent) */
temp = xa * HEX_40000000;
double ya = xa + temp - temp;
double yb = xb + xa - ya;
xa = ya;
xb += yb;
//if (idx > 8 || idx == 0)
if (idx == 0) {
/* If the slope of the arctan is gentle enough (< 0.45), this approximation will suffice */
//double denom = 1.0 / (1.0 + xa*tangentTableA[idx] + xb*tangentTableA[idx] + xa*tangentTableB[idx] + xb*tangentTableB[idx]);
final double denom = 1d / (1d + (xa + xb) * (ttA + ttB));
//double denom = 1.0 / (1.0 + xa*tangentTableA[idx]);
ya = epsA * denom;
yb = epsB * denom;
} else {
double temp2 = xa * ttA;
double za = 1d + temp2;
double zb = -(za - 1d - temp2);
temp2 = xb * ttA + xa * ttB;
temp = za + temp2;
zb += -(temp - za - temp2);
za = temp;
zb += xb * ttB;
ya = epsA / za;
temp = ya * HEX_40000000;
final double yaa = (ya + temp) - temp;
final double yab = ya - yaa;
temp = za * HEX_40000000;
final double zaa = (za + temp) - temp;
final double zab = za - zaa;
/* Correct for rounding in division */
yb = (epsA - yaa * zaa - yaa * zab - yab * zaa - yab * zab) / za;
yb += -epsA * zb / za / za;
yb += epsB / za;
}
epsA = ya;
epsB = yb;
/* Evaluate polynomial */
final double epsA2 = epsA * epsA;
/*
yb = -0.09001346640161823;
yb = yb * epsA2 + 0.11110718400605211;
yb = yb * epsA2 + -0.1428571349122913;
yb = yb * epsA2 + 0.19999999999273194;
yb = yb * epsA2 + -0.33333333333333093;
yb = yb * epsA2 * epsA;
*/
yb = 0.07490822288864472;
yb = yb * epsA2 - 0.09088450866185192;
yb = yb * epsA2 + 0.11111095942313305;
yb = yb * epsA2 - 0.1428571423679182;
yb = yb * epsA2 + 0.19999999999923582;
yb = yb * epsA2 - 0.33333333333333287;
yb = yb * epsA2 * epsA;
ya = epsA;
temp = ya + yb;
yb = -(temp - ya - yb);
ya = temp;
/* Add in effect of epsB. atan'(x) = 1/(1+x^2) */
yb += epsB / (1d + epsA * epsA);
final double eighths = EIGHTHS[idx];
//result = yb + eighths[idx] + ya;
double za = eighths + ya;
double zb = -(za - eighths - ya);
temp = za + yb;
zb += -(temp - za - yb);
za = temp;
double result = za + zb;
if (leftPlane) {
// Result is in the left plane
final double resultb = -(result - za - zb);
final double pia = 1.5707963267948966 * 2;
final double pib = 6.123233995736766E-17 * 2;
za = pia - result;
zb = -(za - pia + result);
zb += pib - resultb;
result = za + zb;
}
if (negate ^ leftPlane) {
result = -result;
}
return result;
}
/**
* Two arguments arctangent function.
* @param y ordinate
* @param x abscissa
* @return phase angle of point (x,y) between {@code -PI} and {@code PI}
*/
public static double atan2(double y, double x) {
if (Double.isNaN(x) || Double.isNaN(y)) {
return Double.NaN;
}
if (y == 0) {
final double invx = 1d / x;
if (invx == 0) { // X is infinite
if (x > 0) {
return y; // return +/- 0.0
}
return copySign(Math.PI, y);
}
if (x < 0 || invx < 0) {
return copySign(Math.PI, y);
}
return x * y;
}
// y cannot now be zero
if (y == Double.POSITIVE_INFINITY) {
if (x == Double.POSITIVE_INFINITY) {
return Math.PI * F_1_4;
}
if (x == Double.NEGATIVE_INFINITY) {
return Math.PI * F_3_4;
}
return Math.PI * F_1_2;
}
if (y == Double.NEGATIVE_INFINITY) {
if (x == Double.POSITIVE_INFINITY) {
return -Math.PI * F_1_4;
}
if (x == Double.NEGATIVE_INFINITY) {
return -Math.PI * F_3_4;
}
return -Math.PI * F_1_2;
}
if (x == Double.POSITIVE_INFINITY) {
return y > 0 ? 0d : -0d;
}
if (x == Double.NEGATIVE_INFINITY) {
return y > 0 ? Math.PI : -Math.PI;
}
// Neither y nor x can be infinite or NAN here
if (x == 0) {
return y > 0 ? Math.PI * F_1_2 : -Math.PI * F_1_2;
}
// Compute ratio r = y/x
final double r = y / x;
if (Double.isInfinite(r)) { // bypass calculations that can create NaN
return atan(r, 0, x < 0);
}
double ra = doubleHighPart(r);
double rb = r - ra;
// Split x
final double xa = doubleHighPart(x);
final double xb = x - xa;
rb += (y - ra * xa - ra * xb - rb * xa - rb * xb) / x;
final double temp = ra + rb;
rb = -(temp - ra - rb);
ra = temp;
if (ra == 0) { // Fix up the sign so atan works correctly
ra = copySign(0d, y);
}
// Call atan
return atan(ra, rb, x < 0);
}
/** Compute the arc sine of a number.
* @param x number on which evaluation is done
* @return arc sine of x
*/
public static double asin(double x) {
if (Double.isNaN(x)) {
return Double.NaN;
}
if (x > 1.0 || x < -1.0) {
return Double.NaN;
}
if (x == 1.0) {
return Math.PI / 2.0;
}
if (x == -1.0) {
return -Math.PI / 2.0;
}
if (x == 0.0) { // Matches +/- 0.0; return correct sign
return x;
}
/* Compute asin(x) = atan(x/sqrt(1-x*x)) */
/* Split x */
double temp = x * HEX_40000000;
final double xa = x + temp - temp;
final double xb = x - xa;
/* Square it */
double ya = xa * xa;
double yb = xa * xb * 2.0 + xb * xb;
/* Subtract from 1 */
ya = -ya;
yb = -yb;
double za = 1.0 + ya;
double zb = -(za - 1.0 - ya);
temp = za + yb;
zb += -(temp - za - yb);
za = temp;
/* Square root */
double y;
y = sqrt(za);
temp = y * HEX_40000000;
ya = y + temp - temp;
yb = y - ya;
/* Extend precision of sqrt */
yb += (za - ya * ya - 2 * ya * yb - yb * yb) / (2.0 * y);
/* Contribution of zb to sqrt */
double dx = zb / (2.0 * y);
// Compute ratio r = x/y
double r = x / y;
temp = r * HEX_40000000;
double ra = r + temp - temp;
double rb = r - ra;
rb += (x - ra * ya - ra * yb - rb * ya - rb * yb) / y; // Correct for rounding in division
rb += -x * dx / y / y; // Add in effect additional bits of sqrt.
temp = ra + rb;
rb = -(temp - ra - rb);
ra = temp;
return atan(ra, rb, false);
}
/** Compute the arc cosine of a number.
* @param x number on which evaluation is done
* @return arc cosine of x
*/
public static double acos(double x) {
if (Double.isNaN(x)) {
return Double.NaN;
}
if (x > 1.0 || x < -1.0) {
return Double.NaN;
}
if (x == -1.0) {
return Math.PI;
}
if (x == 1.0) {
return 0.0;
}
if (x == 0) {
return Math.PI / 2.0;
}
/* Compute acos(x) = atan(sqrt(1-x*x)/x) */
/* Split x */
double temp = x * HEX_40000000;
final double xa = x + temp - temp;
final double xb = x - xa;
/* Square it */
double ya = xa * xa;
double yb = xa * xb * 2.0 + xb * xb;
/* Subtract from 1 */
ya = -ya;
yb = -yb;
double za = 1.0 + ya;
double zb = -(za - 1.0 - ya);
temp = za + yb;
zb += -(temp - za - yb);
za = temp;
/* Square root */
double y = sqrt(za);
temp = y * HEX_40000000;
ya = y + temp - temp;
yb = y - ya;
/* Extend precision of sqrt */
yb += (za - ya * ya - 2 * ya * yb - yb * yb) / (2.0 * y);
/* Contribution of zb to sqrt */
yb += zb / (2.0 * y);
y = ya + yb;
yb = -(y - ya - yb);
// Compute ratio r = y/x
double r = y / x;
// Did r overflow?
if (Double.isInfinite(r)) { // x is effectively zero
return Math.PI / 2; // so return the appropriate value
}
double ra = doubleHighPart(r);
double rb = r - ra;
rb += (y - ra * xa - ra * xb - rb * xa - rb * xb) / x; // Correct for rounding in division
rb += yb / x; // Add in effect additional bits of sqrt.
temp = ra + rb;
rb = -(temp - ra - rb);
ra = temp;
return atan(ra, rb, x < 0);
}
/** Compute the cubic root of a number.
* @param x number on which evaluation is done
* @return cubic root of x
*/
public static double cbrt(double x) {
/* Convert input double to bits */
long inbits = Double.doubleToRawLongBits(x);
int exponent = (int) ((inbits >> 52) & 0x7ff) - 1023;
boolean subnormal = false;
if (exponent == -1023) {
if (x == 0) {
return x;
}
/* Subnormal, so normalize */
subnormal = true;
x *= 1.8014398509481984E16; // 2^54
inbits = Double.doubleToRawLongBits(x);
exponent = (int) ((inbits >> 52) & 0x7ff) - 1023;
}
if (exponent == 1024) {
// Nan or infinity. Don't care which.
return x;
}
/* Divide the exponent by 3 */
int exp3 = exponent / 3;
/* p2 will be the nearest power of 2 to x with its exponent divided by 3 */
double p2 = Double.longBitsToDouble((inbits & 0x8000000000000000L) | (long) (((exp3 + 1023) & 0x7ff)) << 52);
/* This will be a number between 1 and 2 */
final double mant = Double.longBitsToDouble((inbits & 0x000fffffffffffffL) | 0x3ff0000000000000L);
/* Estimate the cube root of mant by polynomial */
double est = -0.010714690733195933;
est = est * mant + 0.0875862700108075;
est = est * mant + -0.3058015757857271;
est = est * mant + 0.7249995199969751;
est = est * mant + 0.5039018405998233;
est *= CBRTTWO[exponent % 3 + 2];
// est should now be good to about 15 bits of precision. Do 2 rounds of
// Newton's method to get closer, this should get us full double precision
// Scale down x for the purpose of doing newtons method. This avoids over/under flows.
final double xs = x / (p2 * p2 * p2);
est += (xs - est * est * est) / (3 * est * est);
est += (xs - est * est * est) / (3 * est * est);
// Do one round of Newton's method in extended precision to get the last bitright.
double temp = est * HEX_40000000;
double ya = est + temp - temp;
double yb = est - ya;
double za = ya * ya;
double zb = ya * yb * 2.0 + yb * yb;
temp = za * HEX_40000000;
double temp2 = za + temp - temp;
zb += za - temp2;
za = temp2;
zb = za * yb + ya * zb + zb * yb;
za *= ya;
double na = xs - za;
double nb = -(na - xs + za);
nb -= zb;
est += (na + nb) / (3 * est * est);
/* Scale by a power of two, so this is exact. */
est *= p2;
if (subnormal) {
est *= 3.814697265625E-6; // 2^-18
}
return est;
}
/**
* Convert degrees to radians, with error of less than 0.5 ULP.
* @param x angle in degrees
* @return x converted into radians
*/
public static double toRadians(double x) {
if (Double.isInfinite(x) || x == 0.0) { // Matches +/- 0.0; return correct sign
return x;
}
// These are PI/180 split into high and low order bits
final double facta = 0.01745329052209854;
final double factb = 1.997844754509471E-9;
double xa = doubleHighPart(x);
double xb = x - xa;
double result = xb * factb + xb * facta + xa * factb + xa * facta;
if (result == 0) {
result *= x; // ensure correct sign if calculation underflows
}
return result;
}
/**
* Convert radians to degrees, with error of less than 0.5 ULP.
* @param x angle in radians
* @return x converted into degrees
*/
public static double toDegrees(double x) {
if (Double.isInfinite(x) || x == 0.0) { // Matches +/- 0.0; return correct sign
return x;
}
// These are 180/PI split into high and low order bits
final double facta = 57.2957763671875;
final double factb = 3.145894820876798E-6;
double xa = doubleHighPart(x);
double xb = x - xa;
return xb * factb + xb * facta + xa * factb + xa * facta;
}
/**
* Absolute value.
* @param x number from which absolute value is requested
* @return abs(x)
*/
public static int abs(final int x) {
final int i = x >>> 31;
return (x ^ (~i + 1)) + i;
}
/**
* Absolute value.
* @param x number from which absolute value is requested
* @return abs(x)
*/
public static long abs(final long x) {
final long l = x >>> 63;
// l is one if x negative zero else
// ~l+1 is zero if x is positive, -1 if x is negative
// x^(~l+1) is x is x is positive, ~x if x is negative
// add around
return (x ^ (~l + 1)) + l;
}
/**
* Absolute value.
* @param x number from which absolute value is requested
* @return abs(x)
*/
public static float abs(final float x) {
return Float.intBitsToFloat(MASK_NON_SIGN_INT & Float.floatToRawIntBits(x));
}
/**
* Absolute value.
* @param x number from which absolute value is requested
* @return abs(x)
*/
public static double abs(double x) {
return Double.longBitsToDouble(MASK_NON_SIGN_LONG & Double.doubleToRawLongBits(x));
}
/**
* Compute least significant bit (Unit in Last Position) for a number.
* @param x number from which ulp is requested
* @return ulp(x)
*/
public static double ulp(double x) {
if (Double.isInfinite(x)) {
return Double.POSITIVE_INFINITY;
}
return abs(x - Double.longBitsToDouble(Double.doubleToRawLongBits(x) ^ 1));
}
/**
* Compute least significant bit (Unit in Last Position) for a number.
* @param x number from which ulp is requested
* @return ulp(x)
*/
public static float ulp(float x) {
if (Float.isInfinite(x)) {
return Float.POSITIVE_INFINITY;
}
return abs(x - Float.intBitsToFloat(Float.floatToIntBits(x) ^ 1));
}
/**
* Multiply a double number by a power of 2.
* @param d number to multiply
* @param n power of 2
* @return d &times; 2<sup>n</sup>
*/
public static double scalb(final double d, final int n) {
// first simple and fast handling when 2^n can be represented using normal numbers
if ((n > -1023) && (n < 1024)) {
return d * Double.longBitsToDouble(((long) (n + 1023)) << 52);
}
// handle special cases
if (Double.isNaN(d) || Double.isInfinite(d) || (d == 0)) {
return d;
}
if (n < -2098) {
return (d > 0) ? 0.0 : -0.0;
}
if (n > 2097) {
return (d > 0) ? Double.POSITIVE_INFINITY : Double.NEGATIVE_INFINITY;
}
// decompose d
final long bits = Double.doubleToRawLongBits(d);
final long sign = bits & 0x8000000000000000L;
int exponent = ((int) (bits >>> 52)) & 0x7ff;
long mantissa = bits & 0x000fffffffffffffL;
// compute scaled exponent
int scaledExponent = exponent + n;
if (n < 0) {
// we are really in the case n <= -1023
if (scaledExponent > 0) {
// both the input and the result are normal numbers, we only adjust the exponent
return Double.longBitsToDouble(sign | (((long) scaledExponent) << 52) | mantissa);
} else if (scaledExponent > -53) {
// the input is a normal number and the result is a subnormal number
// recover the hidden mantissa bit
mantissa |= 1L << 52;
// scales down complete mantissa, hence losing least significant bits
final long mostSignificantLostBit = mantissa & (1L << (-scaledExponent));
mantissa >>>= 1 - scaledExponent;
if (mostSignificantLostBit != 0) {
// we need to add 1 bit to round up the result
mantissa++;
}
return Double.longBitsToDouble(sign | mantissa);
} else {
// no need to compute the mantissa, the number scales down to 0
return (sign == 0L) ? 0.0 : -0.0;
}
} else {
// we are really in the case n >= 1024
if (exponent == 0) {
// the input number is subnormal, normalize it
while ((mantissa >>> 52) != 1) {
mantissa <<= 1;
--scaledExponent;
}
++scaledExponent;
mantissa &= 0x000fffffffffffffL;
if (scaledExponent < 2047) {
return Double.longBitsToDouble(sign | (((long) scaledExponent) << 52) | mantissa);
} else {
return (sign == 0L) ? Double.POSITIVE_INFINITY : Double.NEGATIVE_INFINITY;
}
} else if (scaledExponent < 2047) {
return Double.longBitsToDouble(sign | (((long) scaledExponent) << 52) | mantissa);
} else {
return (sign == 0L) ? Double.POSITIVE_INFINITY : Double.NEGATIVE_INFINITY;
}
}
}
/**
* Multiply a float number by a power of 2.
* @param f number to multiply
* @param n power of 2
* @return f &times; 2<sup>n</sup>
*/
public static float scalb(final float f, final int n) {
// first simple and fast handling when 2^n can be represented using normal numbers
if ((n > -127) && (n < 128)) {
return f * Float.intBitsToFloat((n + 127) << 23);
}
// handle special cases
if (Float.isNaN(f) || Float.isInfinite(f) || (f == 0f)) {
return f;
}
if (n < -277) {
return (f > 0) ? 0.0f : -0.0f;
}
if (n > 276) {
return (f > 0) ? Float.POSITIVE_INFINITY : Float.NEGATIVE_INFINITY;
}
// decompose f
final int bits = Float.floatToIntBits(f);
final int sign = bits & 0x80000000;
int exponent = (bits >>> 23) & 0xff;
int mantissa = bits & 0x007fffff;
// compute scaled exponent
int scaledExponent = exponent + n;
if (n < 0) {
// we are really in the case n <= -127
if (scaledExponent > 0) {
// both the input and the result are normal numbers, we only adjust the exponent
return Float.intBitsToFloat(sign | (scaledExponent << 23) | mantissa);
} else if (scaledExponent > -24) {
// the input is a normal number and the result is a subnormal number
// recover the hidden mantissa bit
mantissa |= 1 << 23;
// scales down complete mantissa, hence losing least significant bits
final int mostSignificantLostBit = mantissa & (1 << (-scaledExponent));
mantissa >>>= 1 - scaledExponent;
if (mostSignificantLostBit != 0) {
// we need to add 1 bit to round up the result
mantissa++;
}
return Float.intBitsToFloat(sign | mantissa);
} else {
// no need to compute the mantissa, the number scales down to 0
return (sign == 0) ? 0.0f : -0.0f;
}
} else {
// we are really in the case n >= 128
if (exponent == 0) {
// the input number is subnormal, normalize it
while ((mantissa >>> 23) != 1) {
mantissa <<= 1;
--scaledExponent;
}
++scaledExponent;
mantissa &= 0x007fffff;
if (scaledExponent < 255) {
return Float.intBitsToFloat(sign | (scaledExponent << 23) | mantissa);
} else {
return (sign == 0) ? Float.POSITIVE_INFINITY : Float.NEGATIVE_INFINITY;
}
} else if (scaledExponent < 255) {
return Float.intBitsToFloat(sign | (scaledExponent << 23) | mantissa);
} else {
return (sign == 0) ? Float.POSITIVE_INFINITY : Float.NEGATIVE_INFINITY;
}
}
}
/**
* Get the next machine representable number after a number, moving
* in the direction of another number.
* <p>
* The ordering is as follows (increasing):
* <ul>
* <li>-INFINITY</li>
* <li>-MAX_VALUE</li>
* <li>-MIN_VALUE</li>
* <li>-0.0</li>
* <li>+0.0</li>
* <li>+MIN_VALUE</li>
* <li>+MAX_VALUE</li>
* <li>+INFINITY</li>
* <li></li>
* </ul>
* <p>
* If arguments compare equal, then the second argument is returned.
* <p>
* If {@code direction} is greater than {@code d},
* the smallest machine representable number strictly greater than
* {@code d} is returned; if less, then the largest representable number
* strictly less than {@code d} is returned.</p>
* <p>
* If {@code d} is infinite and direction does not
* bring it back to finite numbers, it is returned unchanged.</p>
*
* @param d base number
* @param direction (the only important thing is whether
* {@code direction} is greater or smaller than {@code d})
* @return the next machine representable number in the specified direction
*/
public static double nextAfter(double d, double direction) {
// handling of some important special cases
if (Double.isNaN(d) || Double.isNaN(direction)) {
return Double.NaN;
} else if (d == direction) {
return direction;
} else if (Double.isInfinite(d)) {
return (d < 0) ? -Double.MAX_VALUE : Double.MAX_VALUE;
} else if (d == 0) {
return (direction < 0) ? -Double.MIN_VALUE : Double.MIN_VALUE;
}
// special cases MAX_VALUE to infinity and MIN_VALUE to 0
// are handled just as normal numbers
// can use raw bits since already dealt with infinity and NaN
final long bits = Double.doubleToRawLongBits(d);
final long sign = bits & 0x8000000000000000L;
if ((direction < d) ^ (sign == 0L)) {
return Double.longBitsToDouble(sign | ((bits & 0x7fffffffffffffffL) + 1));
} else {
return Double.longBitsToDouble(sign | ((bits & 0x7fffffffffffffffL) - 1));
}
}
/**
* Get the next machine representable number after a number, moving
* in the direction of another number.
* <p>
* The ordering is as follows (increasing):
* <ul>
* <li>-INFINITY</li>
* <li>-MAX_VALUE</li>
* <li>-MIN_VALUE</li>
* <li>-0.0</li>
* <li>+0.0</li>
* <li>+MIN_VALUE</li>
* <li>+MAX_VALUE</li>
* <li>+INFINITY</li>
* <li></li>
* </ul>
* <p>
* If arguments compare equal, then the second argument is returned.
* <p>
* If {@code direction} is greater than {@code f},
* the smallest machine representable number strictly greater than
* {@code f} is returned; if less, then the largest representable number
* strictly less than {@code f} is returned.</p>
* <p>
* If {@code f} is infinite and direction does not
* bring it back to finite numbers, it is returned unchanged.</p>
*
* @param f base number
* @param direction (the only important thing is whether
* {@code direction} is greater or smaller than {@code f})
* @return the next machine representable number in the specified direction
*/
public static float nextAfter(final float f, final double direction) {
// handling of some important special cases
if (Double.isNaN(f) || Double.isNaN(direction)) {
return Float.NaN;
} else if (f == direction) {
return (float) direction;
} else if (Float.isInfinite(f)) {
return (f < 0f) ? -Float.MAX_VALUE : Float.MAX_VALUE;
} else if (f == 0f) {
return (direction < 0) ? -Float.MIN_VALUE : Float.MIN_VALUE;
}
// special cases MAX_VALUE to infinity and MIN_VALUE to 0
// are handled just as normal numbers
final int bits = Float.floatToIntBits(f);
final int sign = bits & 0x80000000;
if ((direction < f) ^ (sign == 0)) {
return Float.intBitsToFloat(sign | ((bits & 0x7fffffff) + 1));
} else {
return Float.intBitsToFloat(sign | ((bits & 0x7fffffff) - 1));
}
}
/** Get the largest whole number smaller than x.
* @param x number from which floor is requested
* @return a double number f such that f is an integer f &lt;= x &lt; f + 1.0
*/
public static double floor(double x) {
long y;
if (Double.isNaN(x)) {
return x;
}
if (x >= TWO_POWER_52 || x <= -TWO_POWER_52) {
return x;
}
y = (long) x;
if (x < 0 && y != x) {
y--;
}
if (y == 0) {
return x * y;
}
return y;
}
/** Get the smallest whole number larger than x.
* @param x number from which ceil is requested
* @return a double number c such that c is an integer c - 1.0 &lt; x &lt;= c
*/
public static double ceil(double x) {
double y;
if (Double.isNaN(x)) {
return x;
}
y = floor(x);
if (y == x) {
return y;
}
y += 1.0;
if (y == 0) {
return x * y;
}
return y;
}
/** Get the whole number that is the nearest to x, or the even one if x is exactly half way between two integers.
* @param x number from which nearest whole number is requested
* @return a double number r such that r is an integer r - 0.5 &lt;= x &lt;= r + 0.5
*/
public static double rint(double x) {
double y = floor(x);
double d = x - y;
if (d > 0.5) {
if (y == -1.0) {
return -0.0; // Preserve sign of operand
}
return y + 1.0;
}
if (d < 0.5) {
return y;
}
/* half way, round to even */
long z = (long) y;
return (z & 1) == 0 ? y : y + 1.0;
}
/** Get the closest long to x.
* @param x number from which closest long is requested
* @return closest long to x
*/
public static long round(double x) {
final long bits = Double.doubleToRawLongBits(x);
final int biasedExp = ((int) (bits >> 52)) & 0x7ff;
// Shift to get rid of bits past comma except first one: will need to
// 1-shift to the right to end up with correct magnitude.
final int shift = (52 - 1 + Double.MAX_EXPONENT) - biasedExp;
if ((shift & -64) == 0) {
// shift in [0,63], so unbiased exp in [-12,51].
long extendedMantissa = 0x0010000000000000L | (bits & 0x000fffffffffffffL);
if (bits < 0) {
extendedMantissa = -extendedMantissa;
}
// If value is positive and first bit past comma is 0, rounding
// to lower integer, else to upper one, which is what "+1" and
// then ">>1" do.
return ((extendedMantissa >> shift) + 1L) >> 1;
} else {
// +-Infinity, NaN, or a mathematical integer.
return (long) x;
}
}
/** Get the closest int to x.
* @param x number from which closest int is requested
* @return closest int to x
*/
public static int round(final float x) {
final int bits = Float.floatToRawIntBits(x);
final int biasedExp = (bits >> 23) & 0xff;
// Shift to get rid of bits past comma except first one: will need to
// 1-shift to the right to end up with correct magnitude.
final int shift = (23 - 1 + Float.MAX_EXPONENT) - biasedExp;
if ((shift & -32) == 0) {
// shift in [0,31], so unbiased exp in [-9,22].
int extendedMantissa = 0x00800000 | (bits & 0x007fffff);
if (bits < 0) {
extendedMantissa = -extendedMantissa;
}
// If value is positive and first bit past comma is 0, rounding
// to lower integer, else to upper one, which is what "+1" and
// then ">>1" do.
return ((extendedMantissa >> shift) + 1) >> 1;
} else {
// +-Infinity, NaN, or a mathematical integer.
return (int) x;
}
}
/** Compute the minimum of two values.
* @param a first value
* @param b second value
* @return a if a is lesser or equal to b, b otherwise
*/
public static int min(final int a, final int b) {
return (a <= b) ? a : b;
}
/** Compute the minimum of two values.
* @param a first value
* @param b second value
* @return a if a is lesser or equal to b, b otherwise
*/
public static long min(final long a, final long b) {
return (a <= b) ? a : b;
}
/** Compute the minimum of two values.
* @param a first value
* @param b second value
* @return a if a is lesser or equal to b, b otherwise
*/
public static float min(final float a, final float b) {
if (a > b) {
return b;
}
if (a < b) {
return a;
}
/* if either arg is NaN, return NaN */
if (a != b) {
return Float.NaN;
}
/* min(+0.0,-0.0) == -0.0 */
/* 0x80000000 == Float.floatToRawIntBits(-0.0d) */
int bits = Float.floatToRawIntBits(a);
if (bits == 0x80000000) {
return a;
}
return b;
}
/** Compute the minimum of two values.
* @param a first value
* @param b second value
* @return a if a is lesser or equal to b, b otherwise
*/
public static double min(final double a, final double b) {
if (a > b) {
return b;
}
if (a < b) {
return a;
}
/* if either arg is NaN, return NaN */
if (a != b) {
return Double.NaN;
}
/* min(+0.0,-0.0) == -0.0 */
/* 0x8000000000000000L == Double.doubleToRawLongBits(-0.0d) */
long bits = Double.doubleToRawLongBits(a);
if (bits == 0x8000000000000000L) {
return a;
}
return b;
}
/** Compute the maximum of two values.
* @param a first value
* @param b second value
* @return b if a is lesser or equal to b, a otherwise
*/
public static int max(final int a, final int b) {
return (a <= b) ? b : a;
}
/** Compute the maximum of two values.
* @param a first value
* @param b second value
* @return b if a is lesser or equal to b, a otherwise
*/
public static long max(final long a, final long b) {
return (a <= b) ? b : a;
}
/** Compute the maximum of two values.
* @param a first value
* @param b second value
* @return b if a is lesser or equal to b, a otherwise
*/
public static float max(final float a, final float b) {
if (a > b) {
return a;
}
if (a < b) {
return b;
}
/* if either arg is NaN, return NaN */
if (a != b) {
return Float.NaN;
}
/* min(+0.0,-0.0) == -0.0 */
/* 0x80000000 == Float.floatToRawIntBits(-0.0d) */
int bits = Float.floatToRawIntBits(a);
if (bits == 0x80000000) {
return b;
}
return a;
}
/** Compute the maximum of two values.
* @param a first value
* @param b second value
* @return b if a is lesser or equal to b, a otherwise
*/
public static double max(final double a, final double b) {
if (a > b) {
return a;
}
if (a < b) {
return b;
}
/* if either arg is NaN, return NaN */
if (a != b) {
return Double.NaN;
}
/* min(+0.0,-0.0) == -0.0 */
/* 0x8000000000000000L == Double.doubleToRawLongBits(-0.0d) */
long bits = Double.doubleToRawLongBits(a);
if (bits == 0x8000000000000000L) {
return b;
}
return a;
}
/**
* Returns the hypotenuse of a triangle with sides {@code x} and {@code y}
* - sqrt(<i>x</i><sup>2</sup>&nbsp;+<i>y</i><sup>2</sup>)<br>
* avoiding intermediate overflow or underflow.
*
* <ul>
* <li> If either argument is infinite, then the result is positive infinity.</li>
* <li> else, if either argument is NaN then the result is NaN.</li>
* </ul>
*
* @param x a value
* @param y a value
* @return sqrt(<i>x</i><sup>2</sup>&nbsp;+<i>y</i><sup>2</sup>)
*/
public static double hypot(final double x, final double y) {
if (Double.isInfinite(x) || Double.isInfinite(y)) {
return Double.POSITIVE_INFINITY;
} else if (Double.isNaN(x) || Double.isNaN(y)) {
return Double.NaN;
} else {
final int expX = getExponent(x);
final int expY = getExponent(y);
if (expX > expY + 27) {
// y is neglectible with respect to x
return abs(x);
} else if (expY > expX + 27) {
// x is neglectible with respect to y
return abs(y);
} else {
// find an intermediate scale to avoid both overflow and underflow
final int middleExp = (expX + expY) / 2;
// scale parameters without losing precision
final double scaledX = scalb(x, -middleExp);
final double scaledY = scalb(y, -middleExp);
// compute scaled hypotenuse
final double scaledH = sqrt(scaledX * scaledX + scaledY * scaledY);
// remove scaling
return scalb(scaledH, middleExp);
}
}
}
/**
* Computes the remainder as prescribed by the IEEE 754 standard.
* The remainder value is mathematically equal to {@code x - y*n}
* where {@code n} is the mathematical integer closest to the exact mathematical value
* of the quotient {@code x/y}.
* If two mathematical integers are equally close to {@code x/y} then
* {@code n} is the integer that is even.
* <ul>
* <li>If either operand is NaN, the result is NaN.</li>
* <li>If the result is not NaN, the sign of the result equals the sign of the dividend.</li>
* <li>If the dividend is an infinity, or the divisor is a zero, or both, the result is NaN.</li>
* <li>If the dividend is finite and the divisor is an infinity, the result equals the dividend.</li>
* <li>If the dividend is a zero and the divisor is finite, the result equals the dividend.</li>
* </ul>
* @param dividend the number to be divided
* @param divisor the number by which to divide
* @return the remainder, rounded
*/
public static double IEEEremainder(final double dividend, final double divisor) {
if (getExponent(dividend) == 1024 || getExponent(divisor) == 1024 || divisor == 0.0) {
// we are in one of the special cases
if (Double.isInfinite(divisor) && !Double.isInfinite(dividend)) {
return dividend;
} else {
return Double.NaN;
}
} else {
// we are in the general case
final double n = AccurateMath.rint(dividend / divisor);
final double remainder = Double.isInfinite(n) ? 0.0 : dividend - divisor * n;
return (remainder == 0) ? AccurateMath.copySign(remainder, dividend) : remainder;
}
}
/** Convert a long to integer, detecting overflows.
* @param n number to convert to int
* @return integer with same value as n if no overflows occur
* @exception ArithmeticException if n cannot fit into an int
* @since 3.4
*/
public static int toIntExact(final long n) {
if (n < Integer.MIN_VALUE ||
n > Integer.MAX_VALUE) {
throw new ArithmeticException(OVERFLOW_MSG);
}
return (int) n;
}
/** Increment a number, detecting overflows.
* @param n number to increment
* @return n+1 if no overflows occur
* @exception ArithmeticException if an overflow occurs
* @since 3.4
*/
public static int incrementExact(final int n) {
if (n == Integer.MAX_VALUE) {
throw new ArithmeticException(OVERFLOW_MSG);
}
return n + 1;
}
/** Increment a number, detecting overflows.
* @param n number to increment
* @return n+1 if no overflows occur
* @exception ArithmeticException if an overflow occurs
* @since 3.4
*/
public static long incrementExact(final long n) {
if (n == Long.MAX_VALUE) {
throw new ArithmeticException(OVERFLOW_MSG);
}
return n + 1;
}
/** Decrement a number, detecting overflows.
* @param n number to decrement
* @return n-1 if no overflows occur
* @exception ArithmeticException if an overflow occurs
* @since 3.4
*/
public static int decrementExact(final int n) {
if (n == Integer.MIN_VALUE) {
throw new ArithmeticException(OVERFLOW_MSG);
}
return n - 1;
}
/** Decrement a number, detecting overflows.
* @param n number to decrement
* @return n-1 if no overflows occur
* @exception ArithmeticException if an overflow occurs
* @since 3.4
*/
public static long decrementExact(final long n) {
if (n == Long.MIN_VALUE) {
throw new ArithmeticException(OVERFLOW_MSG);
}
return n - 1;
}
/** Add two numbers, detecting overflows.
* @param a first number to add
* @param b second number to add
* @return a+b if no overflows occur
* @exception ArithmeticException if an overflow occurs
* @since 3.4
*/
public static int addExact(final int a, final int b) {
// compute sum
final int sum = a + b;
// check for overflow
if ((a ^ b) >= 0 &&
(sum ^ b) < 0) {
throw new ArithmeticException(OVERFLOW_MSG);
}
return sum;
}
/** Add two numbers, detecting overflows.
* @param a first number to add
* @param b second number to add
* @return a+b if no overflows occur
* @exception ArithmeticException if an overflow occurs
* @since 3.4
*/
public static long addExact(final long a, final long b) {
// compute sum
final long sum = a + b;
// check for overflow
if ((a ^ b) >= 0 &&
(sum ^ b) < 0) {
throw new ArithmeticException(OVERFLOW_MSG);
}
return sum;
}
/** Subtract two numbers, detecting overflows.
* @param a first number
* @param b second number to subtract from a
* @return a-b if no overflows occur
* @exception ArithmeticException if an overflow occurs
* @since 3.4
*/
public static int subtractExact(final int a, final int b) {
// compute subtraction
final int sub = a - b;
// check for overflow
if ((a ^ b) < 0 &&
(sub ^ b) >= 0) {
throw new ArithmeticException(OVERFLOW_MSG);
}
return sub;
}
/** Subtract two numbers, detecting overflows.
* @param a first number
* @param b second number to subtract from a
* @return a-b if no overflows occur
* @exception ArithmeticException if an overflow occurs
* @since 3.4
*/
public static long subtractExact(final long a, final long b) {
// compute subtraction
final long sub = a - b;
// check for overflow
if ((a ^ b) < 0 &&
(sub ^ b) >= 0) {
throw new ArithmeticException(OVERFLOW_MSG);
}
return sub;
}
/** Multiply two numbers, detecting overflows.
* @param a first number to multiply
* @param b second number to multiply
* @return a*b if no overflows occur
* @exception ArithmeticException if an overflow occurs
* @since 3.4
*/
public static int multiplyExact(final int a, final int b) {
if (((b > 0) &&
(a > Integer.MAX_VALUE / b ||
a < Integer.MIN_VALUE / b)) ||
((b < -1) &&
(a > Integer.MIN_VALUE / b ||
a < Integer.MAX_VALUE / b)) ||
((b == -1) &&
(a == Integer.MIN_VALUE))) {
throw new ArithmeticException(OVERFLOW_MSG);
}
return a * b;
}
/** Multiply two numbers, detecting overflows.
* @param a first number to multiply
* @param b second number to multiply
* @return a*b if no overflows occur
* @exception ArithmeticException if an overflow occurs
* @since 3.4
*/
public static long multiplyExact(final long a, final long b) {
if (((b > 0L) &&
(a > Long.MAX_VALUE / b ||
a < Long.MIN_VALUE / b)) ||
((b < -1L) &&
(a > Long.MIN_VALUE / b ||
a < Long.MAX_VALUE / b)) ||
((b == -1L) &&
(a == Long.MIN_VALUE))) {
throw new ArithmeticException(OVERFLOW_MSG);
}
return a * b;
}
/** Finds q such that a = q b + r with 0 &lt;= r &lt; b if b &gt; 0 and b &lt; r &lt;= 0 if b &lt; 0.
* <p>
* This methods returns the same value as integer division when
* a and b are same signs, but returns a different value when
* they are opposite (i.e. q is negative).
* </p>
* @param a dividend
* @param b divisor
* @return q such that a = q b + r with 0 &lt;= r &lt; b if b &gt; 0 and b &lt; r &lt;= 0 if b &lt; 0
* @exception ArithmeticException if b == 0
* @see #floorMod(int, int)
* @since 3.4
*/
public static int floorDiv(final int a, final int b) {
if (b == 0) {
throw new ArithmeticException(ZERO_DENOMINATOR_MSG);
}
final int m = a % b;
if ((a ^ b) >= 0 || m == 0) {
// a an b have same sign, or division is exact
return a / b;
} else {
// a and b have opposite signs and division is not exact
return (a / b) - 1;
}
}
/** Finds q such that a = q b + r with 0 &lt;= r &lt; b if b &gt; 0 and b &lt; r &lt;= 0 if b &lt; 0.
* <p>
* This methods returns the same value as integer division when
* a and b are same signs, but returns a different value when
* they are opposite (i.e. q is negative).
* </p>
* @param a dividend
* @param b divisor
* @return q such that a = q b + r with 0 &lt;= r &lt; b if b &gt; 0 and b &lt; r &lt;= 0 if b &lt; 0
* @exception ArithmeticException if b == 0
* @see #floorMod(long, long)
* @since 3.4
*/
public static long floorDiv(final long a, final long b) {
if (b == 0L) {
throw new ArithmeticException(ZERO_DENOMINATOR_MSG);
}
final long m = a % b;
if ((a ^ b) >= 0L || m == 0L) {
// a an b have same sign, or division is exact
return a / b;
} else {
// a and b have opposite signs and division is not exact
return (a / b) - 1L;
}
}
/** Finds r such that a = q b + r with 0 &lt;= r &lt; b if b &gt; 0 and b &lt; r &lt;= 0 if b &lt; 0.
* <p>
* This methods returns the same value as integer modulo when
* a and b are same signs, but returns a different value when
* they are opposite (i.e. q is negative).
* </p>
* @param a dividend
* @param b divisor
* @return r such that a = q b + r with 0 &lt;= r &lt; b if b &gt; 0 and b &lt; r &lt;= 0 if b &lt; 0
* @exception ArithmeticException if b == 0
* @see #floorDiv(int, int)
* @since 3.4
*/
public static int floorMod(final int a, final int b) {
if (b == 0) {
throw new ArithmeticException(ZERO_DENOMINATOR_MSG);
}
final int m = a % b;
if ((a ^ b) >= 0 || m == 0) {
// a an b have same sign, or division is exact
return m;
} else {
// a and b have opposite signs and division is not exact
return b + m;
}
}
/** Finds r such that a = q b + r with 0 &lt;= r &lt; b if b &gt; 0 and b &lt; r &lt;= 0 if b &lt; 0.
* <p>
* This methods returns the same value as integer modulo when
* a and b are same signs, but returns a different value when
* they are opposite (i.e. q is negative).
* </p>
* @param a dividend
* @param b divisor
* @return r such that a = q b + r with 0 &lt;= r &lt; b if b &gt; 0 and b &lt; r &lt;= 0 if b &lt; 0
* @exception ArithmeticException if b == 0
* @see #floorDiv(long, long)
* @since 3.4
*/
public static long floorMod(final long a, final long b) {
if (b == 0L) {
throw new ArithmeticException(ZERO_DENOMINATOR_MSG);
}
final long m = a % b;
if ((a ^ b) >= 0L || m == 0L) {
// a an b have same sign, or division is exact
return m;
} else {
// a and b have opposite signs and division is not exact
return b + m;
}
}
/**
* Returns the first argument with the sign of the second argument.
* A NaN {@code sign} argument is treated as positive.
*
* @param magnitude the value to return
* @param sign the sign for the returned value
* @return the magnitude with the same sign as the {@code sign} argument
*/
public static double copySign(double magnitude, double sign) {
// The highest order bit is going to be zero if the
// highest order bit of m and s is the same and one otherwise.
// So (m^s) will be positive if both m and s have the same sign
// and negative otherwise.
final long m = Double.doubleToRawLongBits(magnitude); // don't care about NaN
final long s = Double.doubleToRawLongBits(sign);
if ((m ^ s) >= 0) {
return magnitude;
}
return -magnitude; // flip sign
}
/**
* Returns the first argument with the sign of the second argument.
* A NaN {@code sign} argument is treated as positive.
*
* @param magnitude the value to return
* @param sign the sign for the returned value
* @return the magnitude with the same sign as the {@code sign} argument
*/
public static float copySign(float magnitude, float sign) {
// The highest order bit is going to be zero if the
// highest order bit of m and s is the same and one otherwise.
// So (m^s) will be positive if both m and s have the same sign
// and negative otherwise.
final int m = Float.floatToRawIntBits(magnitude);
final int s = Float.floatToRawIntBits(sign);
if ((m ^ s) >= 0) {
return magnitude;
}
return -magnitude; // flip sign
}
/**
* Return the exponent of a double number, removing the bias.
* <p>
* For double numbers of the form 2<sup>x</sup>, the unbiased
* exponent is exactly x.
* </p>
* @param d number from which exponent is requested
* @return exponent for d in IEEE754 representation, without bias
*/
public static int getExponent(final double d) {
// NaN and Infinite will return 1024 anywho so can use raw bits
return (int) ((Double.doubleToRawLongBits(d) >>> 52) & 0x7ff) - 1023;
}
/**
* Return the exponent of a float number, removing the bias.
* <p>
* For float numbers of the form 2<sup>x</sup>, the unbiased
* exponent is exactly x.
* </p>
* @param f number from which exponent is requested
* @return exponent for d in IEEE754 representation, without bias
*/
public static int getExponent(final float f) {
// NaN and Infinite will return the same exponent anywho so can use raw bits
return ((Float.floatToRawIntBits(f) >>> 23) & 0xff) - 127;
}
/**
* Print out contents of arrays, and check the length.
* <p>used to generate the preset arrays originally.</p>
* @param a unused
*/
public static void main(String[] a) {
PrintStream out = System.out;
AccurateMathCalc.printarray(out, "EXP_INT_TABLE_A", EXP_INT_TABLE_LEN, ExpIntTable.EXP_INT_TABLE_A);
AccurateMathCalc.printarray(out, "EXP_INT_TABLE_B", EXP_INT_TABLE_LEN, ExpIntTable.EXP_INT_TABLE_B);
AccurateMathCalc.printarray(out, "EXP_FRAC_TABLE_A", EXP_FRAC_TABLE_LEN, ExpFracTable.EXP_FRAC_TABLE_A);
AccurateMathCalc.printarray(out, "EXP_FRAC_TABLE_B", EXP_FRAC_TABLE_LEN, ExpFracTable.EXP_FRAC_TABLE_B);
AccurateMathCalc.printarray(out, "LN_MANT", LN_MANT_LEN, lnMant.LN_MANT);
AccurateMathCalc.printarray(out, "SINE_TABLE_A", SINE_TABLE_LEN, SINE_TABLE_A);
AccurateMathCalc.printarray(out, "SINE_TABLE_B", SINE_TABLE_LEN, SINE_TABLE_B);
AccurateMathCalc.printarray(out, "COSINE_TABLE_A", SINE_TABLE_LEN, COSINE_TABLE_A);
AccurateMathCalc.printarray(out, "COSINE_TABLE_B", SINE_TABLE_LEN, COSINE_TABLE_B);
AccurateMathCalc.printarray(out, "TANGENT_TABLE_A", SINE_TABLE_LEN, TANGENT_TABLE_A);
AccurateMathCalc.printarray(out, "TANGENT_TABLE_B", SINE_TABLE_LEN, TANGENT_TABLE_B);
}
/** Enclose large data table in nested static class so it's only loaded on first access. */
private static class ExpIntTable {
/** Exponential evaluated at integer values,
* exp(x) = expIntTableA[x + EXP_INT_TABLE_MAX_INDEX] + expIntTableB[x+EXP_INT_TABLE_MAX_INDEX].
*/
private static final double[] EXP_INT_TABLE_A;
/** Exponential evaluated at integer values.
* exp(x) = expIntTableA[x + EXP_INT_TABLE_MAX_INDEX] + expIntTableB[x+EXP_INT_TABLE_MAX_INDEX]
*/
private static final double[] EXP_INT_TABLE_B;
static {
if (RECOMPUTE_TABLES_AT_RUNTIME) {
EXP_INT_TABLE_A = new double[AccurateMath.EXP_INT_TABLE_LEN];
EXP_INT_TABLE_B = new double[AccurateMath.EXP_INT_TABLE_LEN];
final double[] tmp = new double[2];
final double[] recip = new double[2];
// Populate expIntTable
for (int i = 0; i < AccurateMath.EXP_INT_TABLE_MAX_INDEX; i++) {
AccurateMathCalc.expint(i, tmp);
EXP_INT_TABLE_A[i + AccurateMath.EXP_INT_TABLE_MAX_INDEX] = tmp[0];
EXP_INT_TABLE_B[i + AccurateMath.EXP_INT_TABLE_MAX_INDEX] = tmp[1];
if (i != 0) {
// Negative integer powers
AccurateMathCalc.splitReciprocal(tmp, recip);
EXP_INT_TABLE_A[AccurateMath.EXP_INT_TABLE_MAX_INDEX - i] = recip[0];
EXP_INT_TABLE_B[AccurateMath.EXP_INT_TABLE_MAX_INDEX - i] = recip[1];
}
}
} else {
EXP_INT_TABLE_A = AccurateMathLiteralArrays.loadExpIntA();
EXP_INT_TABLE_B = AccurateMathLiteralArrays.loadExpIntB();
}
}
}
/** Enclose large data table in nested static class so it's only loaded on first access. */
private static class ExpFracTable {
/** Exponential over the range of 0 - 1 in increments of 2^-10
* exp(x/1024) = expFracTableA[x] + expFracTableB[x].
* 1024 = 2^10
*/
private static final double[] EXP_FRAC_TABLE_A;
/** Exponential over the range of 0 - 1 in increments of 2^-10
* exp(x/1024) = expFracTableA[x] + expFracTableB[x].
*/
private static final double[] EXP_FRAC_TABLE_B;
static {
if (RECOMPUTE_TABLES_AT_RUNTIME) {
EXP_FRAC_TABLE_A = new double[AccurateMath.EXP_FRAC_TABLE_LEN];
EXP_FRAC_TABLE_B = new double[AccurateMath.EXP_FRAC_TABLE_LEN];
final double[] tmp = new double[2];
// Populate expFracTable
final double factor = 1d / (EXP_FRAC_TABLE_LEN - 1);
for (int i = 0; i < EXP_FRAC_TABLE_A.length; i++) {
AccurateMathCalc.slowexp(i * factor, tmp);
EXP_FRAC_TABLE_A[i] = tmp[0];
EXP_FRAC_TABLE_B[i] = tmp[1];
}
} else {
EXP_FRAC_TABLE_A = AccurateMathLiteralArrays.loadExpFracA();
EXP_FRAC_TABLE_B = AccurateMathLiteralArrays.loadExpFracB();
}
}
}
/** Enclose large data table in nested static class so it's only loaded on first access. */
private static class lnMant {
/** Extended precision logarithm table over the range 1 - 2 in increments of 2^-10. */
private static final double[][] LN_MANT;
static {
if (RECOMPUTE_TABLES_AT_RUNTIME) {
LN_MANT = new double[AccurateMath.LN_MANT_LEN][];
// Populate lnMant table
for (int i = 0; i < LN_MANT.length; i++) {
final double d = Double.longBitsToDouble((((long) i) << 42) | 0x3ff0000000000000L);
LN_MANT[i] = AccurateMathCalc.slowLog(d);
}
} else {
LN_MANT = AccurateMathLiteralArrays.loadLnMant();
}
}
}
/** Enclose the Cody/Waite reduction (used in "sin", "cos" and "tan"). */
private static class CodyWaite {
/** k. */
private final int finalK;
/** remA. */
private final double finalRemA;
/** remB. */
private final double finalRemB;
/**
* @param xa Argument.
*/
CodyWaite(double xa) {
// Estimate k.
//k = (int)(xa / 1.5707963267948966);
int k = (int)(xa * 0.6366197723675814);
// Compute remainder.
double remA;
double remB;
while (true) {
double a = -k * 1.570796251296997;
remA = xa + a;
remB = -(remA - xa - a);
a = -k * 7.549789948768648E-8;
double b = remA;
remA = a + b;
remB += -(remA - b - a);
a = -k * 6.123233995736766E-17;
b = remA;
remA = a + b;
remB += -(remA - b - a);
if (remA > 0) {
break;
}
// Remainder is negative, so decrement k and try again.
// This should only happen if the input is very close
// to an even multiple of pi/2.
--k;
}
this.finalK = k;
this.finalRemA = remA;
this.finalRemB = remB;
}
/**
* @return k
*/
int getK() {
return finalK;
}
/**
* @return remA
*/
double getRemA() {
return finalRemA;
}
/**
* @return remB
*/
double getRemB() {
return finalRemB;
}
}
}