#Licensed to the Apache Software Foundation (ASF) under one
#or more contributor license agreements.  See the NOTICE file
#distributed with this work for additional information
#regarding copyright ownership.  The ASF licenses this file
#to you under the Apache License, Version 2.0 (the
#"License"); you may not use this file except in compliance
#with the License.  You may obtain a copy of the License at
#http://www.apache.org/licenses/LICENSE-2.0
#Unless required by applicable law or agreed to in writing,
#software distributed under the License is distributed on an
#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
#KIND, either express or implied.  See the License for the
#specific language governing permissions and limitations
#under the License.
msgid ""
msgstr ""
"Project-Id-Version: 0\n"
"POT-Creation-Date: 2013-02-02T20:12:00\n"
"PO-Revision-Date: 2013-02-02T20:12:00\n"
"Last-Translator: Automatically generated\n"
"Language-Team: None\n"
"MIME-Version: 1.0\n"
"Content-Type: application/x-publican; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. Tag: title
#, no-c-format
msgid "VMware vSphere Installation and Configuration"
msgstr ""

#. Tag: para
#, no-c-format
msgid "If you want to use the VMware vSphere hypervisor to run guest virtual machines, install vSphere on the host(s) in your cloud."
msgstr ""

#. Tag: title
#, no-c-format
msgid "Preparation Checklist for VMware"
msgstr ""

#. Tag: para
#, no-c-format
msgid "For a smoother installation, gather the following information before you start:"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Information listed in <xref linkend=\"vmware-vcenter-checklist\" />"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Information listed in <xref linkend=\"vmware-network-checklist\" />"
msgstr ""

#. Tag: title
#, no-c-format
msgid "vCenter Checklist"
msgstr ""

#. Tag: para
#, no-c-format
msgid "You will need the following information about vCenter."
msgstr ""

#. Tag: para
#, no-c-format
msgid "vCenter Requirement"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Value"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Notes"
msgstr ""

#. Tag: para
#, no-c-format
msgid "vCenter User"
msgstr ""

#. Tag: para
#, no-c-format
msgid "This user must have admin privileges."
msgstr ""

#. Tag: para
#, no-c-format
msgid "vCenter User Password"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Password for the above user."
msgstr ""

#. Tag: para
#, no-c-format
msgid "vCenter Datacenter Name"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Name of the datacenter."
msgstr ""

#. Tag: para
#, no-c-format
msgid "vCenter Cluster Name"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Name of the cluster."
msgstr ""

#. Tag: title
#, no-c-format
msgid "Networking Checklist for VMware"
msgstr ""

#. Tag: para
#, no-c-format
msgid "You will need the following information about VLAN."
msgstr ""

#. Tag: para
#, no-c-format
msgid "VLAN Information"
msgstr ""

#. Tag: para
#, no-c-format
msgid "ESXi VLAN"
msgstr ""

#. Tag: para
#, no-c-format
msgid "VLAN on which all your ESXi hypervisors reside."
msgstr ""

#. Tag: para
#, no-c-format
msgid "ESXI VLAN IP Address"
msgstr ""

#. Tag: para
#, no-c-format
msgid "IP Address Range in the ESXi VLAN. One address per Virtual Router is used from this range."
msgstr ""

#. Tag: para
#, no-c-format
msgid "ESXi VLAN IP Gateway"
msgstr ""

#. Tag: para
#, no-c-format
msgid "ESXi VLAN Netmask"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Management Server VLAN"
msgstr ""

#. Tag: para
#, no-c-format
msgid "VLAN on which the &PRODUCT; Management server is installed."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Public VLAN"
msgstr ""

#. Tag: para
#, no-c-format
msgid "VLAN for the Public Network."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Public VLAN Gateway"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Public VLAN Netmask"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Public VLAN IP Address Range"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Range of Public IP Addresses available for &PRODUCT; use. These addresses will be used for virtual router on &PRODUCT; to route private traffic to external networks."
msgstr ""

#. Tag: para
#, no-c-format
msgid "VLAN Range for Customer use"
msgstr ""

#. Tag: para
#, no-c-format
msgid "A contiguous range of non-routable VLANs. One VLAN will be assigned for each customer."
msgstr ""

#. Tag: title
#, no-c-format
msgid "vSphere Installation Steps"
msgstr ""

#. Tag: para
#, no-c-format
msgid "If you haven't already, you'll need to download and purchase vSphere from the VMware Website (<ulink url=\"https://www.vmware.com/tryvmware/index.php?p=vmware-vsphere&amp;lp=1\">https://www.vmware.com/tryvmware/index.php?p=vmware-vsphere&amp;lp=1</ulink>) and install it by following the VMware vSphere Installation Guide."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Following installation, perform the following configuration, which are described in the next few sections:"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Required"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Optional"
msgstr ""

#. Tag: para
#, no-c-format
msgid "ESXi host setup"
msgstr ""

#. Tag: para
#, no-c-format
msgid "NIC bonding"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Configure host physical networking, virtual switch, vCenter Management Network, and extended port range"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Multipath storage"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Prepare storage for iSCSI"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Configure clusters in vCenter and add hosts to them, or add hosts without clusters to vCenter"
msgstr ""

#. Tag: title
#, no-c-format
msgid "ESXi Host setup"
msgstr ""

#. Tag: para
#, no-c-format
msgid "All ESXi hosts should enable CPU hardware virtualization support in BIOS. Please note hardware virtualization support is not enabled by default on most servers."
msgstr ""

#. Tag: title
#, no-c-format
msgid "Physical Host Networking"
msgstr ""

#. Tag: para
#, no-c-format
msgid "You should have a plan for cabling the vSphere hosts. Proper network configuration is required before adding a vSphere host to &PRODUCT;. To configure an ESXi host, you can use vClient to add it as standalone host to vCenter first. Once you see the host appearing in the vCenter inventory tree, click the host node in the inventory tree, and navigate to the Configuration tab."
msgstr ""

#. Tag: para
#, no-c-format
msgid "In the host configuration tab, click the \"Hardware/Networking\" link to bring up the networking configuration page as above."
msgstr ""

#. Tag: title
#, no-c-format
msgid "Configure Virtual Switch"
msgstr ""

#. Tag: para
#, no-c-format
msgid "A default virtual switch vSwitch0 is created. &PRODUCT; requires all ESXi hosts in the cloud to use the same set of virtual switch names. If you change the default virtual switch name, you will need to configure one or more &PRODUCT; configuration variables as well."
msgstr ""

#. Tag: title
#, no-c-format
msgid "Separating Traffic"
msgstr ""

#. Tag: para
#, no-c-format
msgid "&PRODUCT; allows you to use vCenter to configure three separate networks per ESXi host. These networks are identified by the name of the vSwitch they are connected to. The allowed networks for configuration are public (for traffic to/from the public internet), guest (for guest-guest traffic), and private (for management and usually storage traffic). You can use the default virtual switch for all three, or create one or two other vSwitches for those traffic types."
msgstr ""

#. Tag: para
#, no-c-format
msgid "If you want to separate traffic in this way you should first create and configure vSwitches in vCenter according to the vCenter instructions. Take note of the vSwitch names you have used for each traffic type. You will configure &PRODUCT; to use these vSwitches."
msgstr ""

#. Tag: title
#, no-c-format
msgid "Increasing Ports"
msgstr ""

#. Tag: para
#, no-c-format
msgid "By default a virtual switch on ESXi hosts is created with 56 ports. We recommend setting it to 4088, the maximum number of ports allowed. To do that, click the \"Properties...\" link for virtual switch (note this is not the Properties link for Networking)."
msgstr ""

#. Tag: para
#, no-c-format
msgid "In vSwitch properties dialog, select the vSwitch and click Edit. You should see the following dialog:"
msgstr ""

#. Tag: para
#, no-c-format
msgid "In this dialog, you can change the number of switch ports. After you've done that, ESXi hosts are required to reboot in order for the setting to take effect."
msgstr ""

#. Tag: title
#, no-c-format
msgid "Configure vCenter Management Network"
msgstr ""

#. Tag: para
#, no-c-format
msgid "In the vSwitch properties dialog box, you may see a vCenter management network. This same network will also be used as the &PRODUCT; management network. &PRODUCT; requires the vCenter management network to be configured properly. Select the management network item in the dialog, then click Edit."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Make sure the following values are set:"
msgstr ""

#. Tag: para
#, no-c-format
msgid "VLAN ID set to the desired ID"
msgstr ""

#. Tag: para
#, no-c-format
msgid "vMotion enabled."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Management traffic enabled."
msgstr ""

#. Tag: para
#, no-c-format
msgid "If the ESXi hosts have multiple VMKernel ports, and ESXi is not using the default value \"Management Network\" as the management network name, you must follow these guidelines to configure the management network port group so that &PRODUCT; can find it:"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Use one label for the management network port across all ESXi hosts."
msgstr ""

#. Tag: para
#, no-c-format
msgid "In the &PRODUCT; UI, go to Configuration - Global Settings and set vmware.management.portgroup to the management network label from the ESXi hosts."
msgstr ""

#. Tag: title
#, no-c-format
msgid "Extend Port Range for &PRODUCT; Console Proxy"
msgstr ""

#. Tag: para
#, no-c-format
msgid "(Applies only to VMware vSphere version 4.x)"
msgstr ""

#. Tag: para
#, no-c-format
msgid "You need to extend the range of firewall ports that the console proxy works with on the hosts. This is to enable the console proxy to work with VMware-based VMs. The default additional port range is 59000-60000. To extend the port range, log in to the VMware ESX service console on each host and run the following commands:"
msgstr ""

#. Tag: programlisting
#, no-c-format
msgid "\n"
"esxcfg-firewall -o 59000-60000,tcp,in,vncextras\n"
"esxcfg-firewall -o 59000-60000,tcp,out,vncextras\n"
"        "
msgstr ""

#. Tag: title
#, no-c-format
msgid "Configure NIC Bonding for vSphere"
msgstr ""

#. Tag: para
#, no-c-format
msgid "NIC bonding on vSphere hosts may be done according to the vSphere installation guide."
msgstr ""

#. Tag: title
#, no-c-format
msgid "Storage Preparation for vSphere (iSCSI only)"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Use of iSCSI requires preparatory work in vCenter. You must add an iSCSI target and create an iSCSI datastore."
msgstr ""

#. Tag: para
#, no-c-format
msgid "If you are using NFS, skip this section."
msgstr ""

#. Tag: title
#, no-c-format
msgid "Enable iSCSI initiator for ESXi hosts"
msgstr ""

#. Tag: para
#, no-c-format
msgid "In vCenter, go to hosts and Clusters/Configuration, and click Storage Adapters link. You will see:"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Select iSCSI software adapter and click Properties."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Click the Configure... button."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Check Enabled to enable the initiator."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Click OK to save."
msgstr ""

#. Tag: title
#, no-c-format
msgid "Add iSCSI target"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Under the properties dialog, add the iSCSI target info:"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Repeat these steps for all ESXi hosts in the cluster."
msgstr ""

#. Tag: title
#, no-c-format
msgid "Create an iSCSI datastore"
msgstr ""

#. Tag: para
#, no-c-format
msgid "You should now create a VMFS datastore. Follow these steps to do so:"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Select Home/Inventory/Datastores."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Right click on the datacenter node."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Choose Add Datastore... command."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Follow the wizard to create a iSCSI datastore."
msgstr ""

#. Tag: para
#, no-c-format
msgid "This procedure should be done on one host in the cluster. It is not necessary to do this on all hosts."
msgstr ""

#. Tag: title
#, no-c-format
msgid "Multipathing for vSphere (Optional)"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Storage multipathing on vSphere nodes may be done according to the vSphere installation guide."
msgstr ""

#. Tag: title
#, no-c-format
msgid "Add Hosts or Configure Clusters (vSphere)"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Use vCenter to create a vCenter cluster and add your desired hosts to the cluster. You will later add the entire cluster to &PRODUCT;. (see <xref linkend=\"add-clusters-vsphere\" />)."
msgstr ""

#. Tag: title
#, no-c-format
msgid "Applying Hotfixes to a VMware vSphere Host"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Disconnect the VMware vSphere cluster from &PRODUCT;. It should remain disconnected long enough to apply the hotfix on the host."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Log in to the &PRODUCT; UI as root."
msgstr ""

#. Tag: para
#, no-c-format
msgid "See <xref linkend=\"log-in\" />."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Navigate to the VMware cluster, click Actions, and select Unmanage."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Watch the cluster status until it shows Unmanaged."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Perform the following on each of the ESXi hosts in the cluster:"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Move each of the ESXi hosts in the cluster to maintenance mode."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Ensure that all the VMs are migrated to other hosts in that cluster."
msgstr ""

#. Tag: para
#, no-c-format
msgid "If there is only one host in that cluster, shutdown all the VMs and move the host into maintenance mode."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Apply the patch on the ESXi host."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Restart the host if prompted."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Cancel the maintenance mode on the host."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Reconnect the cluster to &PRODUCT;:"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Navigate to the VMware cluster, click Actions, and select Manage."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Watch the status to see that all the hosts come up. It might take several minutes for the hosts to come up."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Alternatively, verify the host state is properly synchronized and updated in the &PRODUCT; database."
msgstr ""