<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements.  See the NOTICE file
distributed with this work for additional information
regarding copyright ownership.  The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License.  You may obtain a copy of the License at

  http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied.  See the License for the
specific language governing permissions and limitations
under the License.
-->
<expunge>

<!--  VOLUMES EXPUNGE SECTION -->
<!--
		STEPS/TEST CASES COVERED:
		1. Create an Account and a User
		2. Create a Network for that Account
		3. Deploy a VM in the account
		4. Acquire an IP Address
		5. Release the IP Address
		6. Reboot the VM
		7. Stop the VM
		8. Start the VM
		9. List Routers
		10. Stop Router
		11.	List Router
		12. Start Router
		13. Destroy VM
		14. Verify that vm is destroyed
		15.	Recover virtual machine
		16. Verify that vm is recovered
		17. Delete Account

	 -->
	 <command>
		<name>createAccount</name>
		<testcase>    [Create the Account and a User for the account]</testcase>
		<parameters>
			<item setparam="true" random="true">
				<name>account</name>
				<param>accountname</param>
			</item>
			<item>
				<name>accounttype</name>
				<value>1</value>
			</item>
			<item>
				<name>domainid</name>
				<value>1</value>
			</item>
			<item>
				<name>email</name>
				<value>admin@gmail.com</value>
			</item>
			<item>
				<name>firstname</name>
				<value>volumesexpungeadmin</value>
			</item>
			<item>
				<name>lastname</name>
				<value>volumesexpungeadminlastname</value>
			</item>
			<item random="true" setparam="true">
				<name>username</name>
				<param>usernameparam</param>
			</item>
			<item>
				<name>password</name>
				<value>password</value>
			</item>
		</parameters>
		<returnvalue>
			<item setparam="true">
				<name>id</name>
				<param>accountid</param>
			</item>
		</returnvalue>
	</command>

	<!-- Test case #5 - listUsers command -->
	<command>
		<name>listUsers</name>
		<testcase>  5 [List the Created User in (3)]</testcase>
		<parameters>
			<item getparam="true">
				<name>account</name>
				<param>accountname</param>
			</item>
		</parameters>

		<returnvalue>
			<item setparam="true">
				<name>id</name>
				<param>userid</param>
			</item>
		</returnvalue>
	</command>

<!--
	<command>
		<name>createUser</name>
		<testcase>Creating user</testcase>
		<parameters>
			<item random="true">
			    <name>username</name>
			</item>
			<item>
			    <name>password</name>
				<value>apiuser</value>
			</item>
			<item>
				<name>firstname</name>
				<value>apiuser</value>
			</item>
			<item>
				<name>lastname</name>
				<value>apiuser</value>
			</item>
			<item>
				<name>email</name>
				<value>apiuser@gmail.com</value>
			</item>
			<item>
				<name>accounttype</name>
				<value>0</value>
			</item>
		</parameters>
		<returnvalue>
			<item setparam="true">
				<name>id</name>
				<param>userid</param>
			</item>
			<item setparam="true">
				<name>account</name>
				<param>accountname</param>
			</item>
		</returnvalue>
	</command>
-->

	<command>
		<name>registerUserKeys</name>
		<testcase>Registering the user</testcase>
		<parameters>
			<item getparam="true">
			    <name>id</name>
				<param>userid</param>
			</item>
		</parameters>
		<returnvalue>
			<item setparam="true">
				<name>apikey</name>
				<param>apikey</param>
			</item>
			<item setparam="true">
				<name>secretkey</name>
				<param>secretkey</param>
			</item>
		</returnvalue>
	</command>


	<command>
		<name>createNetwork</name>
		<testcase>	[Creating default network]</testcase>
		<parameters>
			<item getparam="true">
			    <name>zoneid</name>
				<param>globalzoneid</param>
			</item>
			<item getparam="true">
			    <name>networkOfferingId</name>
				<param>globalnetworkofferingid</param>
			</item>
			<item getparam="true">
				<name>account</name>
				<param>accountname</param>
			</item>
			<item>
				<name>domainid</name>
				<value>1</value>
			</item>
			<item>
				<name>name</name>
				<value>defaultregressionnetwork</value>
			</item>
			<item>
				<name>displaytext</name>
				<value>defaultregressionnetwork</value>
			</item>
		</parameters>
		<returnvalue>
			<item setparam="true">
				<name>id</name>
				<param>networkid</param>
			</item>
		</returnvalue>
	</command>

<!--  Verify that correct vdis get created on the xen host -->
	<command>
		<name>deployVirtualMachine</name>
		<usercommand>true</usercommand>
		<testcase>Deploy vm from regular centos template</testcase>
		<parameters>
			<item getparam="true">
			    <name>zoneid</name>
				<param>globalzoneid</param>
			</item>
			<item getparam="true">
			    <name>serviceofferingid</name>
				<param>globalserviceofferingid</param>
			</item>
			<item getparam="true">
			    <name>diskofferingid</name>
				<param>globaldiskofferingid</param>
			</item>
			<item getparam="true">
				<name>templateid</name>
				<param>globaltemplateid</param>
			</item>
			<item getparam="true">
				<name>account</name>
				<param>accountname</param>
			</item>
			<item>
				<name>domainid</name>
				<value>1</value>
			</item>
			<item>
				<name>displayname</name>
				<value>VolumeExpungeTest-VM</value>
			</item>
			<item>
				<name>group</name>
				<value>group1</value>
			</item>
			<item getparam="true">
				<name>networkids</name>
				<param>networkid</param>
			</item>
		</parameters>
		<returnvalue>
			<item setparam="true">
				<name>id</name>
				<param>vmid</param>
			</item>
			<item setparam="true">
				<name>name</name>
				<param>vmname</param>
			</item>
		</returnvalue>
	</command>

	<command>
		<name>listVirtualMachines</name>
		<testcase>List virtual machines</testcase>
		<parameters>
			<item getparam="true">
			    <name>id</name>
				<param>vmid</param>
			</item>
		</parameters>
		<returnvalue>
			<item setparam="true">
				<name>hostid</name>
				<param>vm_hostid</param>
			</item>
		</returnvalue>
	</command>

	<command>
		<name>listHosts</name>
		<testcase>List host where vm is running</testcase>
		<parameters>
			<item getparam="true">
				<name>id</name>
				<param>vm_hostid</param>
			</item>
		</parameters>
		<returnvalue>
			<item setparam="true">
				<name>ipaddress</name>
				<param>vmhost_ipaddress</param>
			</item>
		</returnvalue>
	</command>

	<command>
		<name>listRouters</name>
		<testcase>List Routers</testcase>
		<parameters>
			<item getparam="true">
				<name>zoneid</name>
				<param>globalzoneid</param>
			</item>
			<item getparam="true">
				<name>account</name>
				<param>accountname</param>
			</item>
			<item>
				<name>domainid</name>
				<value>1</value>
			</item>
		</parameters>
		<returnvalue>
			<item setparam="true">
				<name>id</name>
				<param>router_id</param>
			</item>
			<item setparam="true">
				<name>hostid</name>
				<param>router_hostid</param>
			</item>
			<item setparam="true">
				<name>name</name>
				<param>routername</param>
			</item>
		</returnvalue>
	</command>

	<command>
		<name>listHosts</name>
		<testcase>List host where domR is running</testcase>
		<parameters>
			<item getparam="true">
				<name>id</name>
				<param>router_hostid</param>
			</item>
		</parameters>
		<returnvalue>
			<item setparam="true">
				<name>ipaddress</name>
				<param>routerhost_ipaddress</param>
			</item>
		</returnvalue>
	</command>

	<command>
		<name>listVolumes</name>
		<testcase>List data disk vm volume</testcase>
		<parameters>
			<item getparam="true">
				<name>virtualmachineid</name>
				<param>vmid</param>
			</item>
			<item>
				<name>type</name>
				<value>DATADISK</value>
			</item>
		</parameters>
		<returnvalue>
			<item setparam="true">
				<name>id</name>
				<param>vm_datavolumeid</param>
			</item>
			<item setparam="true">
				<name>name</name>
				<param>vm_datavolumename</param>
			</item>
		</returnvalue>
	</command>

	<command>
		<name>select path from volumes</name>
		<mysql>true</mysql>
		<testcase>Getting volume path for the vm DATADISK volume</testcase>
		<parameters>
			<item getparam="true">
			    <name>id</name>
				<param>vm_datavolumeid</param>
			</item>
		</parameters>
		<returnvalue>
			<item setparam="true">
			    <name>path</name>
				<param>vm_datavolumepath</param>
			</item>
		</returnvalue>
	</command>

	<command>
		<name>listVolumes</name>
		<testcase>List root disk vm volume</testcase>
		<parameters>
			<item getparam="true">
				<name>virtualmachineid</name>
				<param>vmid</param>
			</item>
			<item>
				<name>type</name>
				<value>ROOT</value>
			</item>
		</parameters>
		<returnvalue>
			<item setparam="true">
				<name>id</name>
				<param>vm_rootvolumeid</param>
			</item>
			<item setparam="true">
				<name>name</name>
				<param>vm_rootvolumename</param>
			</item>
		</returnvalue>
	</command>

	<command>
		<name>select path from volumes</name>
		<mysql>true</mysql>
		<testcase>Getting volume path for the vm root volume</testcase>
		<parameters>
			<item getparam="true">
			    <name>id</name>
				<param>vm_rootvolumeid</param>
			</item>
		</parameters>
		<returnvalue>
			<item setparam="true">
			    <name>path</name>
				<param>vm_rootvolumepath</param>
			</item>
		</returnvalue>
	</command>

	<command>
		<name>select path from volumes</name>
		<mysql>true</mysql>
		<testcase>Getting volume path for the domR</testcase>
		<parameters>
			<item getparam="true">
			    <name>instance_id</name>
				<param>router_id</param>
			</item>
		</parameters>
		<returnvalue>
			<item setparam="true">
			    <name>path</name>
				<param>router_rootvolumepath</param>
			</item>
		</returnvalue>
	</command>

	<command>
		<name>listvdi.sh</name>
		<script>true</script>
		<testcase>List VDI for vm DATADISK volume before vm is destroyed</testcase>
		<parameters>
		<item getparam="true">
			    <name>h</name>
				<param>vmhost_ipaddress</param>
			</item>
			<item getparam="true">
			    <name>u</name>
				<param>vm_datavolumepath</param>
			</item>
		</parameters>
	</command>

	<command>
		<name>listvdi.sh</name>
		<script>true</script>
		<testcase>List VDI for vm ROOT volume before vm is destroyed</testcase>
		<parameters>
		<item getparam="true">
			    <name>h</name>
				<param>vmhost_ipaddress</param>
			</item>
			<item getparam="true">
			    <name>u</name>
				<param>vm_rootvolumepath</param>
			</item>
		</parameters>
	</command>

	<command>
		<name>listvdi.sh</name>
		<script>true</script>
		<testcase>List VDI for router ROOT volume before domR is destroyed</testcase>
		<parameters>
		<item getparam="true">
			    <name>h</name>
				<param>routerhost_ipaddress</param>
			</item>
			<item getparam="true">
			    <name>u</name>
				<param>router_rootvolumepath</param>
			</item>
		</parameters>
	</command>

<!--  Destroy vm created from regular template and verify that vm VDI get destroyed by expunge thread-->
	<command>
		<name>destroyVirtualMachine</name>
		<testcase>Destroy virtual machine</testcase>
		<parameters>
			<item getparam="true">
				<name>id</name>
				<param>vmid</param>
			</item>
		</parameters>
	</command>

	<command>
		<name>listConfigurations</name>
		<testcase>Getting expunge interval value</testcase>
		<parameters>
			<item>
				<name>name</name>
				<value>expunge.interval</value>
			</item>
		</parameters>
		<returnvalue>
			<item setparam="true">
				<name>value</name>
				<param>expunge.interval</param>
			</item>
		</returnvalue>
	</command>

	<command>
		<name>sleep.sh</name>
		<script>true</script>
		<testcase>Sleep for expunge interval</testcase>
		<parameters>
			<item getparam="true">
			    <name>s</name>
				<param>expunge.interval</param>
			</item>
		</parameters>
	</command>


	<command>
		<name>sleep.sh</name>
		<script>true</script>
		<testcase>Sleep for another expunge interval</testcase>
		<parameters>
			<item getparam="true">
			    <name>s</name>
				<param>expunge.interval</param>
			</item>
		</parameters>
	</command>


	<command>
		<name>listvdi.sh</name>
		<error>true</error>
		<script>true</script>
		<testcase>List VDI for vm DATADISK volume before vm is destroyed</testcase>
		<parameters>
		<item getparam="true">
			    <name>h</name>
				<param>vmhost_ipaddress</param>
			</item>
			<item getparam="true">
			    <name>u</name>
				<param>vm_datavolumepath</param>
			</item>
		</parameters>
	</command>

	<command>
		<name>listvdi.sh</name>
		<error>true</error>
		<script>true</script>
		<testcase>List VDI for vm ROOT volume before vm is destroyed</testcase>
		<parameters>
		<item getparam="true">
			    <name>h</name>
				<param>vmhost_ipaddress</param>
			</item>
			<item getparam="true">
			    <name>u</name>
				<param>vm_rootvolumepath</param>
			</item>
		</parameters>
	</command>


<!--  Create a volume, delete it and make sure that it get's destroyed right away on the backend -->
	<command>
		<name>createVolume</name>
		<usercommand>true</usercommand>
		<testcase>Creating a volume</testcase>
		<parameters>
			<item random="true">
				<name>name</name>
			</item>
			<item getparam="true">
				<name>zoneid</name>
				<param>globalzoneid</param>
			</item>
			<item getparam="true">
			    <name>diskofferingid</name>
				<param>globaldiskofferingid</param>
			</item>
		</parameters>
		<returnvalue>
			<item setparam="true">
				<name>id</name>
				<param>volumeid</param>
			</item>
		</returnvalue>
	</command>

	<command>
		<name>attachVolume</name>
		<usercommand>true</usercommand>
		<testcase>Attach the Volume to an Existing VM</testcase>
		<parameters>
			<item getparam="true">
				<name>id</name>
				<param>volumeid</param>
			</item>
			<item getparam="true">
				<name>virtualmachineid</name>
				<param>vmid</param>
			</item>
		</parameters>
	</command>

	<command>
		<name>detachVolume</name>
		<usercommand>true</usercommand>
		<testcase>Detach the Volume from the VM</testcase>
		<parameters>
			<item getparam="true">
				<name>id</name>
				<param>volumeid</param>
			</item>
		</parameters>
	</command>

	<command>
		<name>createSnapshot</name>
		<usercommand>true</usercommand>
		<testcaseid>Create snapshot from detached volume</testcaseid>
		<parameters>
			<item getparam="true">
				<name>volumeid</name>
				<param>volumeid</param>
			</item>
		</parameters>
		<returnvalue>
			<item setparam="true">
				<name>id</name>
				<param>snapshotid</param>
			</item>
			<item setparam="true">
				<name>path</name>
				<param>snapshotpath</param>
			</item>
		</returnvalue>
	</command>

	<command>
		<name>select path from volumes</name>
		<mysql>true</mysql>
		<testcase>Getting volume path for the detached volume</testcase>
		<parameters>
			<item getparam="true">
			    <name>id</name>
				<param>volumeid</param>
			</item>
		</parameters>
		<returnvalue>
			<item setparam="true">
			    <name>path</name>
				<param>detached_volumepath</param>
			</item>
		</returnvalue>
	</command>

	<command>
		<name>listvdi.sh</name>
		<script>true</script>
		<testcase>List VDI for detached volume before the volume is deleted</testcase>
		<parameters>
		<item getparam="true">
			    <name>h</name>
				<param>vmhost_ipaddress</param>
			</item>
			<item getparam="true">
			    <name>u</name>
				<param>detached_volumepath</param>
			</item>
		</parameters>
	</command>

	<command>
		<name>deleteVolume</name>
		<testcase>Delete detached volume</testcase>
		<usercommand>true</usercommand>
		<parameters>
			<item getparam="true">
				<name>id</name>
				<param>volumeid</param>
			</item>
		</parameters>
	</command>

	<command>
		<name>sleep.sh</name>
		<script>true</script>
		<testcase>Sleep for expunge interval</testcase>
		<parameters>
			<item getparam="true">
			    <name>s</name>
				<param>expunge.interval</param>
			</item>
		</parameters>
	</command>


	<command>
		<name>sleep.sh</name>
		<script>true</script>
		<testcase>Sleep for another expunge interval</testcase>
		<parameters>
			<item getparam="true">
			    <name>s</name>
				<param>expunge.interval</param>
			</item>
		</parameters>
	</command>

	<command>
		<name>listvdi.sh</name>
		<error>true</error>
		<script>true</script>
		<testcase>List VDI for detached volume after the volume is deleted</testcase>
		<parameters>
		<item getparam="true">
			    <name>h</name>
				<param>vmhost_ipaddress</param>
			</item>
			<item getparam="true">
			    <name>u</name>
				<param>detached_volumepath</param>
			</item>
		</parameters>
	</command>

<!--  Verify that snapshot vdi was created on the backend -->
	<command>
		<name>listvdi.sh</name>
		<script>true</script>
		<testcase>List VDI for snapshot after it's created</testcase>
		<parameters>
		<item getparam="true">
			    <name>h</name>
				<param>vmhost_ipaddress</param>
			</item>
			<item getparam="true">
			    <name>u</name>
				<param>snapshotpath</param>
			</item>
		</parameters>
	</command>


<!--  Delete user and make sure that domR volumes/snapshots/templates (private and public) get destroyed on backend -->
	<command>
		<name>stopRouter</name>
		<testcase>Stop the domR</testcase>
		<parameters>
			<item getparam="true">
			    <name>id</name>
				<param>router_id</param>
			</item>
		</parameters>
	</command>

	<command>
		<name>deleteUser</name>
		<testcase>Deleting the user</testcase>
		<parameters>
			<item getparam="true">
			    <name>id</name>
				<param>userid</param>
			</item>
		</parameters>
	</command>

	<command>
		<name>listvdi.sh</name>
		<error>true</error>
		<script>true</script>
		<testcase>List VDI for domR after it's destroyed as a part of account cleanup</testcase>
		<parameters>
		<item getparam="true">
			    <name>h</name>
				<param>routerhost_ipaddress</param>
			</item>
			<item getparam="true">
			    <name>u</name>
				<param>router_rootvolumepath</param>
			</item>
		</parameters>
	</command>

	<command>
		<name>listvdi.sh</name>
		<error>true</error>
		<script>true</script>
		<testcase>List VDI for snapshot after corresponding account is deleted</testcase>
		<parameters>
		<item getparam="true">
			    <name>h</name>
				<param>vmhost_ipaddress</param>
			</item>
			<item getparam="true">
			    <name>u</name>
				<param>snapshotpath</param>
			</item>
		</parameters>
	</command>


<!--  TEMPLATES EXPUNGE SECTION -->
<templatesexpunge>
	<command>
		<name>updateConfiguration</name>
		<testcase>Updating storage.cleanup.interval</testcase>
		<parameters>
			<item>
				<name>name</name>
				<value>storage.cleanup.interval</value>
			</item>
			<item>
				<name>value</name>
				<value>60</value>
			</item>
		</parameters>
	</command>

	<command>
		<name>ms.sh</name>
		<script>true</script>
		<testcase>Restarting management server</testcase>
		<parameters>
			<item getparam="true">
			    <name>h</name>
				<param>ms1</param>
			</item>
			<item>
			    <name>o</name>
				<value>restart</value>
			</item>
		</parameters>
	</command>


	<command>
		<name>ms.sh</name>
		<script>true</script>
		<testcase>Restarting management server</testcase>
		<parameters>
			<item getparam="true">
			    <name>h</name>
				<param>ms2</param>
			</item>
			<item>
			    <name>o</name>
				<value>restart</value>
			</item>
		</parameters>
	</command>

<!--  Deploy vm, create private template from the ROOT disk, deploy vm from the new template -->
	<command>
		<name>deployVirtualMachine</name>
		<usercommand>true</usercommand>
		<testcase>Deploying virtual machine from centos template</testcase>
		<parameters>
			<item getparam="true">
			    <name>zoneid</name>
				<param>globalzoneid</param>
			</item>
			<item getparam="true">
			    <name>serviceofferingid</name>
				<param>globalserviceofferingid</param>
			</item>
			<item getparam="true">
			    <name>diskofferingid</name>
				<param>globaldiskofferingid</param>
			</item>
			<item getparam="true">
				<name>templateid</name>
				<param>globaltemplateid</param>
			</item>
			<item getparam="true">
				<name>account</name>
				<param>accountname</param>
			</item>
			<item>
				<name>domainid</name>
				<value>1</value>
			</item>
			<item>
				<name>displayname</name>
				<value>ExpungeTestVM-1</value>
			</item>
			<item>
				<name>group</name>
				<value>group1</value>
			</item>
			<item getparam="true">
				<name>networkids</name>
				<param>networkid</param>
			</item>
		</parameters>
		<returnvalue>
			<item setparam="true">
				<name>id</name>
				<param>vmid</param>
			</item>
		</returnvalue>
	</command>

	<command>
		<name>listVolumes</name>
		<parameters>
			<item getparam="true">
				<name>virtualmachineid</name>
				<param>vmid</param>
			</item>
			<item>
				<name>type</name>
				<value>ROOT</value>
			</item>
		</parameters>
		<returnvalue>
			<item setparam="true">
				<name>id</name>
				<param>rootvolumeid</param>
			</item>
		</returnvalue>
	</command>

	<command>
		<name>stopVirtualMachine</name>
		<testcase>Stop virtual machine</testcase>
		<parameters>
			<item getparam="true">
				<name>id</name>
				<param>vmid</param>
			</item>
		</parameters>
	</command>

	<command>
		<name>createTemplate</name>
		<testcase>Create template from root volume</testcase>
		<parameters>
			<item getparam="true">
				<name>volumeid</name>
				<param>rootvolumeid</param>
			</item>
			<item random="true">
				<name>name</name>
			</item>
			<item>
				<name>displaytext</name>
				<value>newtext</value>
			</item>
			<item>
				<name>osTypeId</name>
				<value>12</value>
			</item>
		</parameters>
		<returnvalue>
			<item setparam="true">
				<name>id</name>
				<param>privatetemplateid</param>
			</item>
		</returnvalue>
	</command>


	<command>
		<name>deployVirtualMachine</name>
		<testcase>Deploying virtual machine from the private template</testcase>
		<parameters>
			<item getparam="true">
			    <name>zoneid</name>
				<param>globalzoneid</param>
			</item>
			<item getparam="true">
			    <name>serviceofferingid</name>
				<param>globalserviceofferingid</param>
			</item>
			<item getparam="true">
			    <name>diskofferingid</name>
				<param>globaldiskofferingid</param>
			</item>
			<item getparam="true">
				<name>templateid</name>
				<param>privatetemplateid</param>
			</item>
			<item>
				<name>account</name>
				<value>admin</value>
			</item>
			<item>
				<name>domainid</name>
				<value>1</value>
			</item>
			<item>
				<name>displayname</name>
				<value>VMcreatedfrmTemplate</value>
			</item>
			<item>
				<name>group</name>
				<value>group1</value>
			</item>
			<item getparam="true">
				<name>networkids</name>
				<param>networkid</param>
			</item>
		</parameters>
		<returnvalue>
			<item setparam="true">
				<name>id</name>
				<param>vmid1</param>
			</item>
			<item setparam="true">
				<name>hostid</name>
				<param>vm_hostid</param>
			</item>
		</returnvalue>
	</command>

	<command>
		<name>listHosts</name>
		<testcase>List host where vm is running</testcase>
		<parameters>
			<item getparam="true">
				<name>id</name>
				<param>vm_hostid</param>
			</item>
		</parameters>
		<returnvalue>
			<item setparam="true">
				<name>ipaddress</name>
				<param>vmhost_ipaddress</param>
			</item>
		</returnvalue>
	</command>

	<command>
		<name>select install_path from template_spool_ref</name>
		<mysql>true</mysql>
		<testcase>Getting private template vdi from the db</testcase>
		<parameters>
			<item getparam="true">
			    <name>template_id</name>
				<param>privatetemplateid</param>
			</item>
		</parameters>
		<returnvalue>
			<item setparam="true">
			    <name>install_path</name>
				<param>template_uuid</param>
			</item>
		</returnvalue>
	</command>

	<command>
		<name>listvdi.sh</name>
		<script>true</script>
		<testcase>List VDI for template on the xen host before vm is destroyed</testcase>
		<parameters>
		<item getparam="true">
			    <name>h</name>
				<param>vmhost_ipaddress</param>
			</item>
			<item getparam="true">
			    <name>u</name>
				<param>template_uuid</param>
			</item>
		</parameters>
	</command>

	<command>
		<name>destroyVirtualMachine</name>
		<testcase>Destroy virtual machine created from the private template</testcase>
		<parameters>
			<item getparam="true">
				<name>id</name>
				<param>vmid1</param>
			</item>
		</parameters>
	</command>

	<command>
		<name>sleep.sh</name>
		<script>true</script>
		<testcase>Sleep for storage cleanup interval</testcase>
		<parameters>
			<item>
			    <name>s</name>
				<value>240</value>
			</item>
		</parameters>
	</command>

	<command>
		<name>listvdi.sh</name>
		<error>true</error>
		<script>true</script>
		<testcase>List VDI for template on the xen host after vm using template is destroyed</testcase>
		<parameters>
		<item getparam="true">
			    <name>h</name>
				<param>vmhost_ipaddress</param>
			</item>
			<item getparam="true">
			    <name>u</name>
				<param>template_uuid</param>
			</item>
		</parameters>
	</command>


<!--  Cleanup section -->
	<command>
		<name>destroyVirtualMachine</name>
		<testcase>Destroy virtual machine as a part of cleanup</testcase>
		<parameters>
			<item getparam="true">
				<name>id</name>
				<param>vmid</param>
			</item>
		</parameters>
	</command>

	<command>
		<name>deleteTemplate</name>
		<testcase>Delete private template</testcase>
		<parameters>
			<item getparam="true">
			    <name>id</name>
				<param>privatetemplateid</param>
			</item>
		</parameters>
	</command>

	<command>
		<name>updateConfiguration</name>
		<testcase>Updating storage.cleanup.interval</testcase>
		<parameters>
			<item>
				<name>name</name>
				<value>storage.cleanup.interval</value>
			</item>
			<item>
				<name>value</name>
				<value>60000</value>
			</item>
		</parameters>
	</command>

	<command>
		<name>ms.sh</name>
		<script>true</script>
		<testcase>Restarting management server</testcase>
		<parameters>
			<item getparam="true">
			    <name>h</name>
				<param>ms1</param>
			</item>
			<item>
			    <name>o</name>
				<value>restart</value>
			</item>
		</parameters>
	</command>

	<command>
		<name>ms.sh</name>
		<script>true</script>
		<testcase>Restarting management server</testcase>
		<parameters>
			<item getparam="true">
			    <name>h</name>
				<param>ms2</param>
			</item>
			<item>
			    <name>o</name>
				<value>restart</value>
			</item>
		</parameters>
	</command>
</templatesexpunge>

</expunge>