| package network |
| |
| // Copyright (c) Microsoft and contributors. All rights reserved. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| // |
| // Code generated by Microsoft (R) AutoRest Code Generator. |
| // Changes may cause incorrect behavior and will be lost if the code is regenerated. |
| |
| import ( |
| "context" |
| "github.com/Azure/go-autorest/autorest" |
| "github.com/Azure/go-autorest/autorest/azure" |
| "github.com/Azure/go-autorest/autorest/validation" |
| "github.com/Azure/go-autorest/tracing" |
| "net/http" |
| ) |
| |
| // ApplicationGatewaysClient is the network Client |
| type ApplicationGatewaysClient struct { |
| BaseClient |
| } |
| |
| // NewApplicationGatewaysClient creates an instance of the ApplicationGatewaysClient client. |
| func NewApplicationGatewaysClient(subscriptionID string) ApplicationGatewaysClient { |
| return NewApplicationGatewaysClientWithBaseURI(DefaultBaseURI, subscriptionID) |
| } |
| |
| // NewApplicationGatewaysClientWithBaseURI creates an instance of the ApplicationGatewaysClient client. |
| func NewApplicationGatewaysClientWithBaseURI(baseURI string, subscriptionID string) ApplicationGatewaysClient { |
| return ApplicationGatewaysClient{NewWithBaseURI(baseURI, subscriptionID)} |
| } |
| |
| // BackendHealth gets the backend health of the specified application gateway in a resource group. |
| // Parameters: |
| // resourceGroupName - the name of the resource group. |
| // applicationGatewayName - the name of the application gateway. |
| // expand - expands BackendAddressPool and BackendHttpSettings referenced in backend health. |
| func (client ApplicationGatewaysClient) BackendHealth(ctx context.Context, resourceGroupName string, applicationGatewayName string, expand string) (result ApplicationGatewaysBackendHealthFuture, err error) { |
| if tracing.IsEnabled() { |
| ctx = tracing.StartSpan(ctx, fqdn+"/ApplicationGatewaysClient.BackendHealth") |
| defer func() { |
| sc := -1 |
| if result.Response() != nil { |
| sc = result.Response().StatusCode |
| } |
| tracing.EndSpan(ctx, sc, err) |
| }() |
| } |
| req, err := client.BackendHealthPreparer(ctx, resourceGroupName, applicationGatewayName, expand) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "BackendHealth", nil, "Failure preparing request") |
| return |
| } |
| |
| result, err = client.BackendHealthSender(req) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "BackendHealth", result.Response(), "Failure sending request") |
| return |
| } |
| |
| return |
| } |
| |
| // BackendHealthPreparer prepares the BackendHealth request. |
| func (client ApplicationGatewaysClient) BackendHealthPreparer(ctx context.Context, resourceGroupName string, applicationGatewayName string, expand string) (*http.Request, error) { |
| pathParameters := map[string]interface{}{ |
| "applicationGatewayName": autorest.Encode("path", applicationGatewayName), |
| "resourceGroupName": autorest.Encode("path", resourceGroupName), |
| "subscriptionId": autorest.Encode("path", client.SubscriptionID), |
| } |
| |
| const APIVersion = "2017-09-01" |
| queryParameters := map[string]interface{}{ |
| "api-version": APIVersion, |
| } |
| if len(expand) > 0 { |
| queryParameters["$expand"] = autorest.Encode("query", expand) |
| } |
| |
| preparer := autorest.CreatePreparer( |
| autorest.AsPost(), |
| autorest.WithBaseURL(client.BaseURI), |
| autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Network/applicationGateways/{applicationGatewayName}/backendhealth", pathParameters), |
| autorest.WithQueryParameters(queryParameters)) |
| return preparer.Prepare((&http.Request{}).WithContext(ctx)) |
| } |
| |
| // BackendHealthSender sends the BackendHealth request. The method will close the |
| // http.Response Body if it receives an error. |
| func (client ApplicationGatewaysClient) BackendHealthSender(req *http.Request) (future ApplicationGatewaysBackendHealthFuture, err error) { |
| var resp *http.Response |
| resp, err = autorest.SendWithSender(client, req, |
| azure.DoRetryWithRegistration(client.Client)) |
| if err != nil { |
| return |
| } |
| future.Future, err = azure.NewFutureFromResponse(resp) |
| return |
| } |
| |
| // BackendHealthResponder handles the response to the BackendHealth request. The method always |
| // closes the http.Response Body. |
| func (client ApplicationGatewaysClient) BackendHealthResponder(resp *http.Response) (result ApplicationGatewayBackendHealth, err error) { |
| err = autorest.Respond( |
| resp, |
| client.ByInspecting(), |
| azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted), |
| autorest.ByUnmarshallingJSON(&result), |
| autorest.ByClosing()) |
| result.Response = autorest.Response{Response: resp} |
| return |
| } |
| |
| // CreateOrUpdate creates or updates the specified application gateway. |
| // Parameters: |
| // resourceGroupName - the name of the resource group. |
| // applicationGatewayName - the name of the application gateway. |
| // parameters - parameters supplied to the create or update application gateway operation. |
| func (client ApplicationGatewaysClient) CreateOrUpdate(ctx context.Context, resourceGroupName string, applicationGatewayName string, parameters ApplicationGateway) (result ApplicationGatewaysCreateOrUpdateFuture, err error) { |
| if tracing.IsEnabled() { |
| ctx = tracing.StartSpan(ctx, fqdn+"/ApplicationGatewaysClient.CreateOrUpdate") |
| defer func() { |
| sc := -1 |
| if result.Response() != nil { |
| sc = result.Response().StatusCode |
| } |
| tracing.EndSpan(ctx, sc, err) |
| }() |
| } |
| if err := validation.Validate([]validation.Validation{ |
| {TargetValue: parameters, |
| Constraints: []validation.Constraint{{Target: "parameters.ApplicationGatewayPropertiesFormat", Name: validation.Null, Rule: false, |
| Chain: []validation.Constraint{{Target: "parameters.ApplicationGatewayPropertiesFormat.WebApplicationFirewallConfiguration", Name: validation.Null, Rule: false, |
| Chain: []validation.Constraint{{Target: "parameters.ApplicationGatewayPropertiesFormat.WebApplicationFirewallConfiguration.Enabled", Name: validation.Null, Rule: true, Chain: nil}, |
| {Target: "parameters.ApplicationGatewayPropertiesFormat.WebApplicationFirewallConfiguration.RuleSetType", Name: validation.Null, Rule: true, Chain: nil}, |
| {Target: "parameters.ApplicationGatewayPropertiesFormat.WebApplicationFirewallConfiguration.RuleSetVersion", Name: validation.Null, Rule: true, Chain: nil}, |
| }}, |
| }}}}}); err != nil { |
| return result, validation.NewError("network.ApplicationGatewaysClient", "CreateOrUpdate", err.Error()) |
| } |
| |
| req, err := client.CreateOrUpdatePreparer(ctx, resourceGroupName, applicationGatewayName, parameters) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "CreateOrUpdate", nil, "Failure preparing request") |
| return |
| } |
| |
| result, err = client.CreateOrUpdateSender(req) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "CreateOrUpdate", result.Response(), "Failure sending request") |
| return |
| } |
| |
| return |
| } |
| |
| // CreateOrUpdatePreparer prepares the CreateOrUpdate request. |
| func (client ApplicationGatewaysClient) CreateOrUpdatePreparer(ctx context.Context, resourceGroupName string, applicationGatewayName string, parameters ApplicationGateway) (*http.Request, error) { |
| pathParameters := map[string]interface{}{ |
| "applicationGatewayName": autorest.Encode("path", applicationGatewayName), |
| "resourceGroupName": autorest.Encode("path", resourceGroupName), |
| "subscriptionId": autorest.Encode("path", client.SubscriptionID), |
| } |
| |
| const APIVersion = "2017-09-01" |
| queryParameters := map[string]interface{}{ |
| "api-version": APIVersion, |
| } |
| |
| preparer := autorest.CreatePreparer( |
| autorest.AsContentType("application/json; charset=utf-8"), |
| autorest.AsPut(), |
| autorest.WithBaseURL(client.BaseURI), |
| autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Network/applicationGateways/{applicationGatewayName}", pathParameters), |
| autorest.WithJSON(parameters), |
| autorest.WithQueryParameters(queryParameters)) |
| return preparer.Prepare((&http.Request{}).WithContext(ctx)) |
| } |
| |
| // CreateOrUpdateSender sends the CreateOrUpdate request. The method will close the |
| // http.Response Body if it receives an error. |
| func (client ApplicationGatewaysClient) CreateOrUpdateSender(req *http.Request) (future ApplicationGatewaysCreateOrUpdateFuture, err error) { |
| var resp *http.Response |
| resp, err = autorest.SendWithSender(client, req, |
| azure.DoRetryWithRegistration(client.Client)) |
| if err != nil { |
| return |
| } |
| future.Future, err = azure.NewFutureFromResponse(resp) |
| return |
| } |
| |
| // CreateOrUpdateResponder handles the response to the CreateOrUpdate request. The method always |
| // closes the http.Response Body. |
| func (client ApplicationGatewaysClient) CreateOrUpdateResponder(resp *http.Response) (result ApplicationGateway, err error) { |
| err = autorest.Respond( |
| resp, |
| client.ByInspecting(), |
| azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusCreated), |
| autorest.ByUnmarshallingJSON(&result), |
| autorest.ByClosing()) |
| result.Response = autorest.Response{Response: resp} |
| return |
| } |
| |
| // Delete deletes the specified application gateway. |
| // Parameters: |
| // resourceGroupName - the name of the resource group. |
| // applicationGatewayName - the name of the application gateway. |
| func (client ApplicationGatewaysClient) Delete(ctx context.Context, resourceGroupName string, applicationGatewayName string) (result ApplicationGatewaysDeleteFuture, err error) { |
| if tracing.IsEnabled() { |
| ctx = tracing.StartSpan(ctx, fqdn+"/ApplicationGatewaysClient.Delete") |
| defer func() { |
| sc := -1 |
| if result.Response() != nil { |
| sc = result.Response().StatusCode |
| } |
| tracing.EndSpan(ctx, sc, err) |
| }() |
| } |
| req, err := client.DeletePreparer(ctx, resourceGroupName, applicationGatewayName) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "Delete", nil, "Failure preparing request") |
| return |
| } |
| |
| result, err = client.DeleteSender(req) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "Delete", result.Response(), "Failure sending request") |
| return |
| } |
| |
| return |
| } |
| |
| // DeletePreparer prepares the Delete request. |
| func (client ApplicationGatewaysClient) DeletePreparer(ctx context.Context, resourceGroupName string, applicationGatewayName string) (*http.Request, error) { |
| pathParameters := map[string]interface{}{ |
| "applicationGatewayName": autorest.Encode("path", applicationGatewayName), |
| "resourceGroupName": autorest.Encode("path", resourceGroupName), |
| "subscriptionId": autorest.Encode("path", client.SubscriptionID), |
| } |
| |
| const APIVersion = "2017-09-01" |
| queryParameters := map[string]interface{}{ |
| "api-version": APIVersion, |
| } |
| |
| preparer := autorest.CreatePreparer( |
| autorest.AsDelete(), |
| autorest.WithBaseURL(client.BaseURI), |
| autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Network/applicationGateways/{applicationGatewayName}", pathParameters), |
| autorest.WithQueryParameters(queryParameters)) |
| return preparer.Prepare((&http.Request{}).WithContext(ctx)) |
| } |
| |
| // DeleteSender sends the Delete request. The method will close the |
| // http.Response Body if it receives an error. |
| func (client ApplicationGatewaysClient) DeleteSender(req *http.Request) (future ApplicationGatewaysDeleteFuture, err error) { |
| var resp *http.Response |
| resp, err = autorest.SendWithSender(client, req, |
| azure.DoRetryWithRegistration(client.Client)) |
| if err != nil { |
| return |
| } |
| future.Future, err = azure.NewFutureFromResponse(resp) |
| return |
| } |
| |
| // DeleteResponder handles the response to the Delete request. The method always |
| // closes the http.Response Body. |
| func (client ApplicationGatewaysClient) DeleteResponder(resp *http.Response) (result autorest.Response, err error) { |
| err = autorest.Respond( |
| resp, |
| client.ByInspecting(), |
| azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted, http.StatusNoContent), |
| autorest.ByClosing()) |
| result.Response = resp |
| return |
| } |
| |
| // Get gets the specified application gateway. |
| // Parameters: |
| // resourceGroupName - the name of the resource group. |
| // applicationGatewayName - the name of the application gateway. |
| func (client ApplicationGatewaysClient) Get(ctx context.Context, resourceGroupName string, applicationGatewayName string) (result ApplicationGateway, err error) { |
| if tracing.IsEnabled() { |
| ctx = tracing.StartSpan(ctx, fqdn+"/ApplicationGatewaysClient.Get") |
| defer func() { |
| sc := -1 |
| if result.Response.Response != nil { |
| sc = result.Response.Response.StatusCode |
| } |
| tracing.EndSpan(ctx, sc, err) |
| }() |
| } |
| req, err := client.GetPreparer(ctx, resourceGroupName, applicationGatewayName) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "Get", nil, "Failure preparing request") |
| return |
| } |
| |
| resp, err := client.GetSender(req) |
| if err != nil { |
| result.Response = autorest.Response{Response: resp} |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "Get", resp, "Failure sending request") |
| return |
| } |
| |
| result, err = client.GetResponder(resp) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "Get", resp, "Failure responding to request") |
| } |
| |
| return |
| } |
| |
| // GetPreparer prepares the Get request. |
| func (client ApplicationGatewaysClient) GetPreparer(ctx context.Context, resourceGroupName string, applicationGatewayName string) (*http.Request, error) { |
| pathParameters := map[string]interface{}{ |
| "applicationGatewayName": autorest.Encode("path", applicationGatewayName), |
| "resourceGroupName": autorest.Encode("path", resourceGroupName), |
| "subscriptionId": autorest.Encode("path", client.SubscriptionID), |
| } |
| |
| const APIVersion = "2017-09-01" |
| queryParameters := map[string]interface{}{ |
| "api-version": APIVersion, |
| } |
| |
| preparer := autorest.CreatePreparer( |
| autorest.AsGet(), |
| autorest.WithBaseURL(client.BaseURI), |
| autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Network/applicationGateways/{applicationGatewayName}", pathParameters), |
| autorest.WithQueryParameters(queryParameters)) |
| return preparer.Prepare((&http.Request{}).WithContext(ctx)) |
| } |
| |
| // GetSender sends the Get request. The method will close the |
| // http.Response Body if it receives an error. |
| func (client ApplicationGatewaysClient) GetSender(req *http.Request) (*http.Response, error) { |
| return autorest.SendWithSender(client, req, |
| azure.DoRetryWithRegistration(client.Client)) |
| } |
| |
| // GetResponder handles the response to the Get request. The method always |
| // closes the http.Response Body. |
| func (client ApplicationGatewaysClient) GetResponder(resp *http.Response) (result ApplicationGateway, err error) { |
| err = autorest.Respond( |
| resp, |
| client.ByInspecting(), |
| azure.WithErrorUnlessStatusCode(http.StatusOK), |
| autorest.ByUnmarshallingJSON(&result), |
| autorest.ByClosing()) |
| result.Response = autorest.Response{Response: resp} |
| return |
| } |
| |
| // GetSslPredefinedPolicy gets Ssl predefined policy with the specified policy name. |
| // Parameters: |
| // predefinedPolicyName - name of Ssl predefined policy. |
| func (client ApplicationGatewaysClient) GetSslPredefinedPolicy(ctx context.Context, predefinedPolicyName string) (result ApplicationGatewaySslPredefinedPolicy, err error) { |
| if tracing.IsEnabled() { |
| ctx = tracing.StartSpan(ctx, fqdn+"/ApplicationGatewaysClient.GetSslPredefinedPolicy") |
| defer func() { |
| sc := -1 |
| if result.Response.Response != nil { |
| sc = result.Response.Response.StatusCode |
| } |
| tracing.EndSpan(ctx, sc, err) |
| }() |
| } |
| req, err := client.GetSslPredefinedPolicyPreparer(ctx, predefinedPolicyName) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "GetSslPredefinedPolicy", nil, "Failure preparing request") |
| return |
| } |
| |
| resp, err := client.GetSslPredefinedPolicySender(req) |
| if err != nil { |
| result.Response = autorest.Response{Response: resp} |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "GetSslPredefinedPolicy", resp, "Failure sending request") |
| return |
| } |
| |
| result, err = client.GetSslPredefinedPolicyResponder(resp) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "GetSslPredefinedPolicy", resp, "Failure responding to request") |
| } |
| |
| return |
| } |
| |
| // GetSslPredefinedPolicyPreparer prepares the GetSslPredefinedPolicy request. |
| func (client ApplicationGatewaysClient) GetSslPredefinedPolicyPreparer(ctx context.Context, predefinedPolicyName string) (*http.Request, error) { |
| pathParameters := map[string]interface{}{ |
| "predefinedPolicyName": autorest.Encode("path", predefinedPolicyName), |
| "subscriptionId": autorest.Encode("path", client.SubscriptionID), |
| } |
| |
| const APIVersion = "2017-09-01" |
| queryParameters := map[string]interface{}{ |
| "api-version": APIVersion, |
| } |
| |
| preparer := autorest.CreatePreparer( |
| autorest.AsGet(), |
| autorest.WithBaseURL(client.BaseURI), |
| autorest.WithPathParameters("/subscriptions/{subscriptionId}/providers/Microsoft.Network/applicationGatewayAvailableSslOptions/default/predefinedPolicies/{predefinedPolicyName}", pathParameters), |
| autorest.WithQueryParameters(queryParameters)) |
| return preparer.Prepare((&http.Request{}).WithContext(ctx)) |
| } |
| |
| // GetSslPredefinedPolicySender sends the GetSslPredefinedPolicy request. The method will close the |
| // http.Response Body if it receives an error. |
| func (client ApplicationGatewaysClient) GetSslPredefinedPolicySender(req *http.Request) (*http.Response, error) { |
| return autorest.SendWithSender(client, req, |
| azure.DoRetryWithRegistration(client.Client)) |
| } |
| |
| // GetSslPredefinedPolicyResponder handles the response to the GetSslPredefinedPolicy request. The method always |
| // closes the http.Response Body. |
| func (client ApplicationGatewaysClient) GetSslPredefinedPolicyResponder(resp *http.Response) (result ApplicationGatewaySslPredefinedPolicy, err error) { |
| err = autorest.Respond( |
| resp, |
| client.ByInspecting(), |
| azure.WithErrorUnlessStatusCode(http.StatusOK), |
| autorest.ByUnmarshallingJSON(&result), |
| autorest.ByClosing()) |
| result.Response = autorest.Response{Response: resp} |
| return |
| } |
| |
| // List lists all application gateways in a resource group. |
| // Parameters: |
| // resourceGroupName - the name of the resource group. |
| func (client ApplicationGatewaysClient) List(ctx context.Context, resourceGroupName string) (result ApplicationGatewayListResultPage, err error) { |
| if tracing.IsEnabled() { |
| ctx = tracing.StartSpan(ctx, fqdn+"/ApplicationGatewaysClient.List") |
| defer func() { |
| sc := -1 |
| if result.aglr.Response.Response != nil { |
| sc = result.aglr.Response.Response.StatusCode |
| } |
| tracing.EndSpan(ctx, sc, err) |
| }() |
| } |
| result.fn = client.listNextResults |
| req, err := client.ListPreparer(ctx, resourceGroupName) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "List", nil, "Failure preparing request") |
| return |
| } |
| |
| resp, err := client.ListSender(req) |
| if err != nil { |
| result.aglr.Response = autorest.Response{Response: resp} |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "List", resp, "Failure sending request") |
| return |
| } |
| |
| result.aglr, err = client.ListResponder(resp) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "List", resp, "Failure responding to request") |
| } |
| |
| return |
| } |
| |
| // ListPreparer prepares the List request. |
| func (client ApplicationGatewaysClient) ListPreparer(ctx context.Context, resourceGroupName string) (*http.Request, error) { |
| pathParameters := map[string]interface{}{ |
| "resourceGroupName": autorest.Encode("path", resourceGroupName), |
| "subscriptionId": autorest.Encode("path", client.SubscriptionID), |
| } |
| |
| const APIVersion = "2017-09-01" |
| queryParameters := map[string]interface{}{ |
| "api-version": APIVersion, |
| } |
| |
| preparer := autorest.CreatePreparer( |
| autorest.AsGet(), |
| autorest.WithBaseURL(client.BaseURI), |
| autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Network/applicationGateways", pathParameters), |
| autorest.WithQueryParameters(queryParameters)) |
| return preparer.Prepare((&http.Request{}).WithContext(ctx)) |
| } |
| |
| // ListSender sends the List request. The method will close the |
| // http.Response Body if it receives an error. |
| func (client ApplicationGatewaysClient) ListSender(req *http.Request) (*http.Response, error) { |
| return autorest.SendWithSender(client, req, |
| azure.DoRetryWithRegistration(client.Client)) |
| } |
| |
| // ListResponder handles the response to the List request. The method always |
| // closes the http.Response Body. |
| func (client ApplicationGatewaysClient) ListResponder(resp *http.Response) (result ApplicationGatewayListResult, err error) { |
| err = autorest.Respond( |
| resp, |
| client.ByInspecting(), |
| azure.WithErrorUnlessStatusCode(http.StatusOK), |
| autorest.ByUnmarshallingJSON(&result), |
| autorest.ByClosing()) |
| result.Response = autorest.Response{Response: resp} |
| return |
| } |
| |
| // listNextResults retrieves the next set of results, if any. |
| func (client ApplicationGatewaysClient) listNextResults(ctx context.Context, lastResults ApplicationGatewayListResult) (result ApplicationGatewayListResult, err error) { |
| req, err := lastResults.applicationGatewayListResultPreparer(ctx) |
| if err != nil { |
| return result, autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "listNextResults", nil, "Failure preparing next results request") |
| } |
| if req == nil { |
| return |
| } |
| resp, err := client.ListSender(req) |
| if err != nil { |
| result.Response = autorest.Response{Response: resp} |
| return result, autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "listNextResults", resp, "Failure sending next results request") |
| } |
| result, err = client.ListResponder(resp) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "listNextResults", resp, "Failure responding to next results request") |
| } |
| return |
| } |
| |
| // ListComplete enumerates all values, automatically crossing page boundaries as required. |
| func (client ApplicationGatewaysClient) ListComplete(ctx context.Context, resourceGroupName string) (result ApplicationGatewayListResultIterator, err error) { |
| if tracing.IsEnabled() { |
| ctx = tracing.StartSpan(ctx, fqdn+"/ApplicationGatewaysClient.List") |
| defer func() { |
| sc := -1 |
| if result.Response().Response.Response != nil { |
| sc = result.page.Response().Response.Response.StatusCode |
| } |
| tracing.EndSpan(ctx, sc, err) |
| }() |
| } |
| result.page, err = client.List(ctx, resourceGroupName) |
| return |
| } |
| |
| // ListAll gets all the application gateways in a subscription. |
| func (client ApplicationGatewaysClient) ListAll(ctx context.Context) (result ApplicationGatewayListResultPage, err error) { |
| if tracing.IsEnabled() { |
| ctx = tracing.StartSpan(ctx, fqdn+"/ApplicationGatewaysClient.ListAll") |
| defer func() { |
| sc := -1 |
| if result.aglr.Response.Response != nil { |
| sc = result.aglr.Response.Response.StatusCode |
| } |
| tracing.EndSpan(ctx, sc, err) |
| }() |
| } |
| result.fn = client.listAllNextResults |
| req, err := client.ListAllPreparer(ctx) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "ListAll", nil, "Failure preparing request") |
| return |
| } |
| |
| resp, err := client.ListAllSender(req) |
| if err != nil { |
| result.aglr.Response = autorest.Response{Response: resp} |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "ListAll", resp, "Failure sending request") |
| return |
| } |
| |
| result.aglr, err = client.ListAllResponder(resp) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "ListAll", resp, "Failure responding to request") |
| } |
| |
| return |
| } |
| |
| // ListAllPreparer prepares the ListAll request. |
| func (client ApplicationGatewaysClient) ListAllPreparer(ctx context.Context) (*http.Request, error) { |
| pathParameters := map[string]interface{}{ |
| "subscriptionId": autorest.Encode("path", client.SubscriptionID), |
| } |
| |
| const APIVersion = "2017-09-01" |
| queryParameters := map[string]interface{}{ |
| "api-version": APIVersion, |
| } |
| |
| preparer := autorest.CreatePreparer( |
| autorest.AsGet(), |
| autorest.WithBaseURL(client.BaseURI), |
| autorest.WithPathParameters("/subscriptions/{subscriptionId}/providers/Microsoft.Network/applicationGateways", pathParameters), |
| autorest.WithQueryParameters(queryParameters)) |
| return preparer.Prepare((&http.Request{}).WithContext(ctx)) |
| } |
| |
| // ListAllSender sends the ListAll request. The method will close the |
| // http.Response Body if it receives an error. |
| func (client ApplicationGatewaysClient) ListAllSender(req *http.Request) (*http.Response, error) { |
| return autorest.SendWithSender(client, req, |
| azure.DoRetryWithRegistration(client.Client)) |
| } |
| |
| // ListAllResponder handles the response to the ListAll request. The method always |
| // closes the http.Response Body. |
| func (client ApplicationGatewaysClient) ListAllResponder(resp *http.Response) (result ApplicationGatewayListResult, err error) { |
| err = autorest.Respond( |
| resp, |
| client.ByInspecting(), |
| azure.WithErrorUnlessStatusCode(http.StatusOK), |
| autorest.ByUnmarshallingJSON(&result), |
| autorest.ByClosing()) |
| result.Response = autorest.Response{Response: resp} |
| return |
| } |
| |
| // listAllNextResults retrieves the next set of results, if any. |
| func (client ApplicationGatewaysClient) listAllNextResults(ctx context.Context, lastResults ApplicationGatewayListResult) (result ApplicationGatewayListResult, err error) { |
| req, err := lastResults.applicationGatewayListResultPreparer(ctx) |
| if err != nil { |
| return result, autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "listAllNextResults", nil, "Failure preparing next results request") |
| } |
| if req == nil { |
| return |
| } |
| resp, err := client.ListAllSender(req) |
| if err != nil { |
| result.Response = autorest.Response{Response: resp} |
| return result, autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "listAllNextResults", resp, "Failure sending next results request") |
| } |
| result, err = client.ListAllResponder(resp) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "listAllNextResults", resp, "Failure responding to next results request") |
| } |
| return |
| } |
| |
| // ListAllComplete enumerates all values, automatically crossing page boundaries as required. |
| func (client ApplicationGatewaysClient) ListAllComplete(ctx context.Context) (result ApplicationGatewayListResultIterator, err error) { |
| if tracing.IsEnabled() { |
| ctx = tracing.StartSpan(ctx, fqdn+"/ApplicationGatewaysClient.ListAll") |
| defer func() { |
| sc := -1 |
| if result.Response().Response.Response != nil { |
| sc = result.page.Response().Response.Response.StatusCode |
| } |
| tracing.EndSpan(ctx, sc, err) |
| }() |
| } |
| result.page, err = client.ListAll(ctx) |
| return |
| } |
| |
| // ListAvailableSslOptions lists available Ssl options for configuring Ssl policy. |
| func (client ApplicationGatewaysClient) ListAvailableSslOptions(ctx context.Context) (result ApplicationGatewayAvailableSslOptions, err error) { |
| if tracing.IsEnabled() { |
| ctx = tracing.StartSpan(ctx, fqdn+"/ApplicationGatewaysClient.ListAvailableSslOptions") |
| defer func() { |
| sc := -1 |
| if result.Response.Response != nil { |
| sc = result.Response.Response.StatusCode |
| } |
| tracing.EndSpan(ctx, sc, err) |
| }() |
| } |
| req, err := client.ListAvailableSslOptionsPreparer(ctx) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "ListAvailableSslOptions", nil, "Failure preparing request") |
| return |
| } |
| |
| resp, err := client.ListAvailableSslOptionsSender(req) |
| if err != nil { |
| result.Response = autorest.Response{Response: resp} |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "ListAvailableSslOptions", resp, "Failure sending request") |
| return |
| } |
| |
| result, err = client.ListAvailableSslOptionsResponder(resp) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "ListAvailableSslOptions", resp, "Failure responding to request") |
| } |
| |
| return |
| } |
| |
| // ListAvailableSslOptionsPreparer prepares the ListAvailableSslOptions request. |
| func (client ApplicationGatewaysClient) ListAvailableSslOptionsPreparer(ctx context.Context) (*http.Request, error) { |
| pathParameters := map[string]interface{}{ |
| "subscriptionId": autorest.Encode("path", client.SubscriptionID), |
| } |
| |
| const APIVersion = "2017-09-01" |
| queryParameters := map[string]interface{}{ |
| "api-version": APIVersion, |
| } |
| |
| preparer := autorest.CreatePreparer( |
| autorest.AsGet(), |
| autorest.WithBaseURL(client.BaseURI), |
| autorest.WithPathParameters("/subscriptions/{subscriptionId}/providers/Microsoft.Network/applicationGatewayAvailableSslOptions/default", pathParameters), |
| autorest.WithQueryParameters(queryParameters)) |
| return preparer.Prepare((&http.Request{}).WithContext(ctx)) |
| } |
| |
| // ListAvailableSslOptionsSender sends the ListAvailableSslOptions request. The method will close the |
| // http.Response Body if it receives an error. |
| func (client ApplicationGatewaysClient) ListAvailableSslOptionsSender(req *http.Request) (*http.Response, error) { |
| return autorest.SendWithSender(client, req, |
| azure.DoRetryWithRegistration(client.Client)) |
| } |
| |
| // ListAvailableSslOptionsResponder handles the response to the ListAvailableSslOptions request. The method always |
| // closes the http.Response Body. |
| func (client ApplicationGatewaysClient) ListAvailableSslOptionsResponder(resp *http.Response) (result ApplicationGatewayAvailableSslOptions, err error) { |
| err = autorest.Respond( |
| resp, |
| client.ByInspecting(), |
| azure.WithErrorUnlessStatusCode(http.StatusOK), |
| autorest.ByUnmarshallingJSON(&result), |
| autorest.ByClosing()) |
| result.Response = autorest.Response{Response: resp} |
| return |
| } |
| |
| // ListAvailableSslPredefinedPolicies lists all SSL predefined policies for configuring Ssl policy. |
| func (client ApplicationGatewaysClient) ListAvailableSslPredefinedPolicies(ctx context.Context) (result ApplicationGatewayAvailableSslPredefinedPoliciesPage, err error) { |
| if tracing.IsEnabled() { |
| ctx = tracing.StartSpan(ctx, fqdn+"/ApplicationGatewaysClient.ListAvailableSslPredefinedPolicies") |
| defer func() { |
| sc := -1 |
| if result.agaspp.Response.Response != nil { |
| sc = result.agaspp.Response.Response.StatusCode |
| } |
| tracing.EndSpan(ctx, sc, err) |
| }() |
| } |
| result.fn = client.listAvailableSslPredefinedPoliciesNextResults |
| req, err := client.ListAvailableSslPredefinedPoliciesPreparer(ctx) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "ListAvailableSslPredefinedPolicies", nil, "Failure preparing request") |
| return |
| } |
| |
| resp, err := client.ListAvailableSslPredefinedPoliciesSender(req) |
| if err != nil { |
| result.agaspp.Response = autorest.Response{Response: resp} |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "ListAvailableSslPredefinedPolicies", resp, "Failure sending request") |
| return |
| } |
| |
| result.agaspp, err = client.ListAvailableSslPredefinedPoliciesResponder(resp) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "ListAvailableSslPredefinedPolicies", resp, "Failure responding to request") |
| } |
| |
| return |
| } |
| |
| // ListAvailableSslPredefinedPoliciesPreparer prepares the ListAvailableSslPredefinedPolicies request. |
| func (client ApplicationGatewaysClient) ListAvailableSslPredefinedPoliciesPreparer(ctx context.Context) (*http.Request, error) { |
| pathParameters := map[string]interface{}{ |
| "subscriptionId": autorest.Encode("path", client.SubscriptionID), |
| } |
| |
| const APIVersion = "2017-09-01" |
| queryParameters := map[string]interface{}{ |
| "api-version": APIVersion, |
| } |
| |
| preparer := autorest.CreatePreparer( |
| autorest.AsGet(), |
| autorest.WithBaseURL(client.BaseURI), |
| autorest.WithPathParameters("/subscriptions/{subscriptionId}/providers/Microsoft.Network/applicationGatewayAvailableSslOptions/default/predefinedPolicies", pathParameters), |
| autorest.WithQueryParameters(queryParameters)) |
| return preparer.Prepare((&http.Request{}).WithContext(ctx)) |
| } |
| |
| // ListAvailableSslPredefinedPoliciesSender sends the ListAvailableSslPredefinedPolicies request. The method will close the |
| // http.Response Body if it receives an error. |
| func (client ApplicationGatewaysClient) ListAvailableSslPredefinedPoliciesSender(req *http.Request) (*http.Response, error) { |
| return autorest.SendWithSender(client, req, |
| azure.DoRetryWithRegistration(client.Client)) |
| } |
| |
| // ListAvailableSslPredefinedPoliciesResponder handles the response to the ListAvailableSslPredefinedPolicies request. The method always |
| // closes the http.Response Body. |
| func (client ApplicationGatewaysClient) ListAvailableSslPredefinedPoliciesResponder(resp *http.Response) (result ApplicationGatewayAvailableSslPredefinedPolicies, err error) { |
| err = autorest.Respond( |
| resp, |
| client.ByInspecting(), |
| azure.WithErrorUnlessStatusCode(http.StatusOK), |
| autorest.ByUnmarshallingJSON(&result), |
| autorest.ByClosing()) |
| result.Response = autorest.Response{Response: resp} |
| return |
| } |
| |
| // listAvailableSslPredefinedPoliciesNextResults retrieves the next set of results, if any. |
| func (client ApplicationGatewaysClient) listAvailableSslPredefinedPoliciesNextResults(ctx context.Context, lastResults ApplicationGatewayAvailableSslPredefinedPolicies) (result ApplicationGatewayAvailableSslPredefinedPolicies, err error) { |
| req, err := lastResults.applicationGatewayAvailableSslPredefinedPoliciesPreparer(ctx) |
| if err != nil { |
| return result, autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "listAvailableSslPredefinedPoliciesNextResults", nil, "Failure preparing next results request") |
| } |
| if req == nil { |
| return |
| } |
| resp, err := client.ListAvailableSslPredefinedPoliciesSender(req) |
| if err != nil { |
| result.Response = autorest.Response{Response: resp} |
| return result, autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "listAvailableSslPredefinedPoliciesNextResults", resp, "Failure sending next results request") |
| } |
| result, err = client.ListAvailableSslPredefinedPoliciesResponder(resp) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "listAvailableSslPredefinedPoliciesNextResults", resp, "Failure responding to next results request") |
| } |
| return |
| } |
| |
| // ListAvailableSslPredefinedPoliciesComplete enumerates all values, automatically crossing page boundaries as required. |
| func (client ApplicationGatewaysClient) ListAvailableSslPredefinedPoliciesComplete(ctx context.Context) (result ApplicationGatewayAvailableSslPredefinedPoliciesIterator, err error) { |
| if tracing.IsEnabled() { |
| ctx = tracing.StartSpan(ctx, fqdn+"/ApplicationGatewaysClient.ListAvailableSslPredefinedPolicies") |
| defer func() { |
| sc := -1 |
| if result.Response().Response.Response != nil { |
| sc = result.page.Response().Response.Response.StatusCode |
| } |
| tracing.EndSpan(ctx, sc, err) |
| }() |
| } |
| result.page, err = client.ListAvailableSslPredefinedPolicies(ctx) |
| return |
| } |
| |
| // ListAvailableWafRuleSets lists all available web application firewall rule sets. |
| func (client ApplicationGatewaysClient) ListAvailableWafRuleSets(ctx context.Context) (result ApplicationGatewayAvailableWafRuleSetsResult, err error) { |
| if tracing.IsEnabled() { |
| ctx = tracing.StartSpan(ctx, fqdn+"/ApplicationGatewaysClient.ListAvailableWafRuleSets") |
| defer func() { |
| sc := -1 |
| if result.Response.Response != nil { |
| sc = result.Response.Response.StatusCode |
| } |
| tracing.EndSpan(ctx, sc, err) |
| }() |
| } |
| req, err := client.ListAvailableWafRuleSetsPreparer(ctx) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "ListAvailableWafRuleSets", nil, "Failure preparing request") |
| return |
| } |
| |
| resp, err := client.ListAvailableWafRuleSetsSender(req) |
| if err != nil { |
| result.Response = autorest.Response{Response: resp} |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "ListAvailableWafRuleSets", resp, "Failure sending request") |
| return |
| } |
| |
| result, err = client.ListAvailableWafRuleSetsResponder(resp) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "ListAvailableWafRuleSets", resp, "Failure responding to request") |
| } |
| |
| return |
| } |
| |
| // ListAvailableWafRuleSetsPreparer prepares the ListAvailableWafRuleSets request. |
| func (client ApplicationGatewaysClient) ListAvailableWafRuleSetsPreparer(ctx context.Context) (*http.Request, error) { |
| pathParameters := map[string]interface{}{ |
| "subscriptionId": autorest.Encode("path", client.SubscriptionID), |
| } |
| |
| const APIVersion = "2017-09-01" |
| queryParameters := map[string]interface{}{ |
| "api-version": APIVersion, |
| } |
| |
| preparer := autorest.CreatePreparer( |
| autorest.AsGet(), |
| autorest.WithBaseURL(client.BaseURI), |
| autorest.WithPathParameters("/subscriptions/{subscriptionId}/providers/Microsoft.Network/applicationGatewayAvailableWafRuleSets", pathParameters), |
| autorest.WithQueryParameters(queryParameters)) |
| return preparer.Prepare((&http.Request{}).WithContext(ctx)) |
| } |
| |
| // ListAvailableWafRuleSetsSender sends the ListAvailableWafRuleSets request. The method will close the |
| // http.Response Body if it receives an error. |
| func (client ApplicationGatewaysClient) ListAvailableWafRuleSetsSender(req *http.Request) (*http.Response, error) { |
| return autorest.SendWithSender(client, req, |
| azure.DoRetryWithRegistration(client.Client)) |
| } |
| |
| // ListAvailableWafRuleSetsResponder handles the response to the ListAvailableWafRuleSets request. The method always |
| // closes the http.Response Body. |
| func (client ApplicationGatewaysClient) ListAvailableWafRuleSetsResponder(resp *http.Response) (result ApplicationGatewayAvailableWafRuleSetsResult, err error) { |
| err = autorest.Respond( |
| resp, |
| client.ByInspecting(), |
| azure.WithErrorUnlessStatusCode(http.StatusOK), |
| autorest.ByUnmarshallingJSON(&result), |
| autorest.ByClosing()) |
| result.Response = autorest.Response{Response: resp} |
| return |
| } |
| |
| // Start starts the specified application gateway. |
| // Parameters: |
| // resourceGroupName - the name of the resource group. |
| // applicationGatewayName - the name of the application gateway. |
| func (client ApplicationGatewaysClient) Start(ctx context.Context, resourceGroupName string, applicationGatewayName string) (result ApplicationGatewaysStartFuture, err error) { |
| if tracing.IsEnabled() { |
| ctx = tracing.StartSpan(ctx, fqdn+"/ApplicationGatewaysClient.Start") |
| defer func() { |
| sc := -1 |
| if result.Response() != nil { |
| sc = result.Response().StatusCode |
| } |
| tracing.EndSpan(ctx, sc, err) |
| }() |
| } |
| req, err := client.StartPreparer(ctx, resourceGroupName, applicationGatewayName) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "Start", nil, "Failure preparing request") |
| return |
| } |
| |
| result, err = client.StartSender(req) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "Start", result.Response(), "Failure sending request") |
| return |
| } |
| |
| return |
| } |
| |
| // StartPreparer prepares the Start request. |
| func (client ApplicationGatewaysClient) StartPreparer(ctx context.Context, resourceGroupName string, applicationGatewayName string) (*http.Request, error) { |
| pathParameters := map[string]interface{}{ |
| "applicationGatewayName": autorest.Encode("path", applicationGatewayName), |
| "resourceGroupName": autorest.Encode("path", resourceGroupName), |
| "subscriptionId": autorest.Encode("path", client.SubscriptionID), |
| } |
| |
| const APIVersion = "2017-09-01" |
| queryParameters := map[string]interface{}{ |
| "api-version": APIVersion, |
| } |
| |
| preparer := autorest.CreatePreparer( |
| autorest.AsPost(), |
| autorest.WithBaseURL(client.BaseURI), |
| autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Network/applicationGateways/{applicationGatewayName}/start", pathParameters), |
| autorest.WithQueryParameters(queryParameters)) |
| return preparer.Prepare((&http.Request{}).WithContext(ctx)) |
| } |
| |
| // StartSender sends the Start request. The method will close the |
| // http.Response Body if it receives an error. |
| func (client ApplicationGatewaysClient) StartSender(req *http.Request) (future ApplicationGatewaysStartFuture, err error) { |
| var resp *http.Response |
| resp, err = autorest.SendWithSender(client, req, |
| azure.DoRetryWithRegistration(client.Client)) |
| if err != nil { |
| return |
| } |
| future.Future, err = azure.NewFutureFromResponse(resp) |
| return |
| } |
| |
| // StartResponder handles the response to the Start request. The method always |
| // closes the http.Response Body. |
| func (client ApplicationGatewaysClient) StartResponder(resp *http.Response) (result autorest.Response, err error) { |
| err = autorest.Respond( |
| resp, |
| client.ByInspecting(), |
| azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted), |
| autorest.ByClosing()) |
| result.Response = resp |
| return |
| } |
| |
| // Stop stops the specified application gateway in a resource group. |
| // Parameters: |
| // resourceGroupName - the name of the resource group. |
| // applicationGatewayName - the name of the application gateway. |
| func (client ApplicationGatewaysClient) Stop(ctx context.Context, resourceGroupName string, applicationGatewayName string) (result ApplicationGatewaysStopFuture, err error) { |
| if tracing.IsEnabled() { |
| ctx = tracing.StartSpan(ctx, fqdn+"/ApplicationGatewaysClient.Stop") |
| defer func() { |
| sc := -1 |
| if result.Response() != nil { |
| sc = result.Response().StatusCode |
| } |
| tracing.EndSpan(ctx, sc, err) |
| }() |
| } |
| req, err := client.StopPreparer(ctx, resourceGroupName, applicationGatewayName) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "Stop", nil, "Failure preparing request") |
| return |
| } |
| |
| result, err = client.StopSender(req) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "Stop", result.Response(), "Failure sending request") |
| return |
| } |
| |
| return |
| } |
| |
| // StopPreparer prepares the Stop request. |
| func (client ApplicationGatewaysClient) StopPreparer(ctx context.Context, resourceGroupName string, applicationGatewayName string) (*http.Request, error) { |
| pathParameters := map[string]interface{}{ |
| "applicationGatewayName": autorest.Encode("path", applicationGatewayName), |
| "resourceGroupName": autorest.Encode("path", resourceGroupName), |
| "subscriptionId": autorest.Encode("path", client.SubscriptionID), |
| } |
| |
| const APIVersion = "2017-09-01" |
| queryParameters := map[string]interface{}{ |
| "api-version": APIVersion, |
| } |
| |
| preparer := autorest.CreatePreparer( |
| autorest.AsPost(), |
| autorest.WithBaseURL(client.BaseURI), |
| autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Network/applicationGateways/{applicationGatewayName}/stop", pathParameters), |
| autorest.WithQueryParameters(queryParameters)) |
| return preparer.Prepare((&http.Request{}).WithContext(ctx)) |
| } |
| |
| // StopSender sends the Stop request. The method will close the |
| // http.Response Body if it receives an error. |
| func (client ApplicationGatewaysClient) StopSender(req *http.Request) (future ApplicationGatewaysStopFuture, err error) { |
| var resp *http.Response |
| resp, err = autorest.SendWithSender(client, req, |
| azure.DoRetryWithRegistration(client.Client)) |
| if err != nil { |
| return |
| } |
| future.Future, err = azure.NewFutureFromResponse(resp) |
| return |
| } |
| |
| // StopResponder handles the response to the Stop request. The method always |
| // closes the http.Response Body. |
| func (client ApplicationGatewaysClient) StopResponder(resp *http.Response) (result autorest.Response, err error) { |
| err = autorest.Respond( |
| resp, |
| client.ByInspecting(), |
| azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted), |
| autorest.ByClosing()) |
| result.Response = resp |
| return |
| } |
| |
| // UpdateTags updates the specified application gateway tags. |
| // Parameters: |
| // resourceGroupName - the name of the resource group. |
| // applicationGatewayName - the name of the application gateway. |
| // parameters - parameters supplied to update application gateway tags. |
| func (client ApplicationGatewaysClient) UpdateTags(ctx context.Context, resourceGroupName string, applicationGatewayName string, parameters TagsObject) (result ApplicationGatewaysUpdateTagsFuture, err error) { |
| if tracing.IsEnabled() { |
| ctx = tracing.StartSpan(ctx, fqdn+"/ApplicationGatewaysClient.UpdateTags") |
| defer func() { |
| sc := -1 |
| if result.Response() != nil { |
| sc = result.Response().StatusCode |
| } |
| tracing.EndSpan(ctx, sc, err) |
| }() |
| } |
| req, err := client.UpdateTagsPreparer(ctx, resourceGroupName, applicationGatewayName, parameters) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "UpdateTags", nil, "Failure preparing request") |
| return |
| } |
| |
| result, err = client.UpdateTagsSender(req) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ApplicationGatewaysClient", "UpdateTags", result.Response(), "Failure sending request") |
| return |
| } |
| |
| return |
| } |
| |
| // UpdateTagsPreparer prepares the UpdateTags request. |
| func (client ApplicationGatewaysClient) UpdateTagsPreparer(ctx context.Context, resourceGroupName string, applicationGatewayName string, parameters TagsObject) (*http.Request, error) { |
| pathParameters := map[string]interface{}{ |
| "applicationGatewayName": autorest.Encode("path", applicationGatewayName), |
| "resourceGroupName": autorest.Encode("path", resourceGroupName), |
| "subscriptionId": autorest.Encode("path", client.SubscriptionID), |
| } |
| |
| const APIVersion = "2017-09-01" |
| queryParameters := map[string]interface{}{ |
| "api-version": APIVersion, |
| } |
| |
| preparer := autorest.CreatePreparer( |
| autorest.AsContentType("application/json; charset=utf-8"), |
| autorest.AsPatch(), |
| autorest.WithBaseURL(client.BaseURI), |
| autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Network/applicationGateways/{applicationGatewayName}", pathParameters), |
| autorest.WithJSON(parameters), |
| autorest.WithQueryParameters(queryParameters)) |
| return preparer.Prepare((&http.Request{}).WithContext(ctx)) |
| } |
| |
| // UpdateTagsSender sends the UpdateTags request. The method will close the |
| // http.Response Body if it receives an error. |
| func (client ApplicationGatewaysClient) UpdateTagsSender(req *http.Request) (future ApplicationGatewaysUpdateTagsFuture, err error) { |
| var resp *http.Response |
| resp, err = autorest.SendWithSender(client, req, |
| azure.DoRetryWithRegistration(client.Client)) |
| if err != nil { |
| return |
| } |
| future.Future, err = azure.NewFutureFromResponse(resp) |
| return |
| } |
| |
| // UpdateTagsResponder handles the response to the UpdateTags request. The method always |
| // closes the http.Response Body. |
| func (client ApplicationGatewaysClient) UpdateTagsResponder(resp *http.Response) (result ApplicationGateway, err error) { |
| err = autorest.Respond( |
| resp, |
| client.ByInspecting(), |
| azure.WithErrorUnlessStatusCode(http.StatusOK), |
| autorest.ByUnmarshallingJSON(&result), |
| autorest.ByClosing()) |
| result.Response = autorest.Response{Response: resp} |
| return |
| } |
