vendor/k8s.io/client-go/tools/leaderelection/leaderelection.go - cloudstack-kubernetes-provider - Git at Google

 /*
 Copyright 2015 The Kubernetes Authors.

 Licensed under the Apache License, Version 2.0 (the "License");
 you may not use this file except in compliance with the License.
 You may obtain a copy of the License at

     http://www.apache.org/licenses/LICENSE-2.0

 Unless required by applicable law or agreed to in writing, software
 distributed under the License is distributed on an "AS IS" BASIS,
 WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 See the License for the specific language governing permissions and
 limitations under the License.
 */

 // Package leaderelection implements leader election of a set of endpoints.
 // It uses an annotation in the endpoints object to store the record of the
 // election state.
 //
 // This implementation does not guarantee that only one client is acting as a
 // leader (a.k.a. fencing). A client observes timestamps captured locally to
 // infer the state of the leader election. Thus the implementation is tolerant
 // to arbitrary clock skew, but is not tolerant to arbitrary clock skew rate.
 //
 // However the level of tolerance to skew rate can be configured by setting
 // RenewDeadline and LeaseDuration appropriately. The tolerance expressed as a
 // maximum tolerated ratio of time passed on the fastest node to time passed on
 // the slowest node can be approximately achieved with a configuration that sets
 // the same ratio of LeaseDuration to RenewDeadline. For example if a user wanted
 // to tolerate some nodes progressing forward in time twice as fast as other nodes,
 // the user could set LeaseDuration to 60 seconds and RenewDeadline to 30 seconds.
 //
 // While not required, some method of clock synchronization between nodes in the
 // cluster is highly recommended. It's important to keep in mind when configuring
 // this client that the tolerance to skew rate varies inversely to master
 // availability.
 //
 // Larger clusters often have a more lenient SLA for API latency. This should be
 // taken into account when configuring the client. The rate of leader transitions
 // should be monitored and RetryPeriod and LeaseDuration should be increased
 // until the rate is stable and acceptably low. It's important to keep in mind
 // when configuring this client that the tolerance to API latency varies inversely
 // to master availability.
 //
 // DISCLAIMER: this is an alpha API. This library will likely change significantly
 // or even be removed entirely in subsequent releases. Depend on this API at
 // your own risk.
 package leaderelection

 import (
 	"context"
 	"fmt"
 	"reflect"
 	"time"

 	"k8s.io/apimachinery/pkg/api/errors"
 	metav1 "k8s.io/apimachinery/pkg/apis/meta/v1"
 	"k8s.io/apimachinery/pkg/util/clock"
 	"k8s.io/apimachinery/pkg/util/runtime"
 	"k8s.io/apimachinery/pkg/util/wait"
 	rl "k8s.io/client-go/tools/leaderelection/resourcelock"

 	"k8s.io/klog"
 )

 const (
 	JitterFactor = 1.2
 )

 // NewLeaderElector creates a LeaderElector from a LeaderElectionConfig
 func NewLeaderElector(lec LeaderElectionConfig) (*LeaderElector, error) {
 	if lec.LeaseDuration <= lec.RenewDeadline {
 		return nil, fmt.Errorf("leaseDuration must be greater than renewDeadline")
 	}
 	if lec.RenewDeadline <= time.Duration(JitterFactor*float64(lec.RetryPeriod)) {
 		return nil, fmt.Errorf("renewDeadline must be greater than retryPeriod*JitterFactor")
 	}
 	if lec.LeaseDuration < 1 {
 		return nil, fmt.Errorf("leaseDuration must be greater than zero")
 	}
 	if lec.RenewDeadline < 1 {
 		return nil, fmt.Errorf("renewDeadline must be greater than zero")
 	}
 	if lec.RetryPeriod < 1 {
 		return nil, fmt.Errorf("retryPeriod must be greater than zero")
 	}

 	if lec.Lock == nil {
 		return nil, fmt.Errorf("Lock must not be nil.")
 	}
 	le := LeaderElector{
 		config:  lec,
 		clock:   clock.RealClock{},
 		metrics: globalMetricsFactory.newLeaderMetrics(),
 	}
 	le.metrics.leaderOff(le.config.Name)
 	return &le, nil
 }

 type LeaderElectionConfig struct {
 	// Lock is the resource that will be used for locking
 	Lock rl.Interface

 	// LeaseDuration is the duration that non-leader candidates will
 	// wait to force acquire leadership. This is measured against time of
 	// last observed ack.
 	LeaseDuration time.Duration
 	// RenewDeadline is the duration that the acting master will retry
 	// refreshing leadership before giving up.
 	RenewDeadline time.Duration
 	// RetryPeriod is the duration the LeaderElector clients should wait
 	// between tries of actions.
 	RetryPeriod time.Duration

 	// Callbacks are callbacks that are triggered during certain lifecycle
 	// events of the LeaderElector
 	Callbacks LeaderCallbacks

 	// WatchDog is the associated health checker
 	// WatchDog may be null if its not needed/configured.
 	WatchDog *HealthzAdaptor

 	// ReleaseOnCancel should be set true if the lock should be released
 	// when the run context is cancelled. If you set this to true, you must
 	// ensure all code guarded by this lease has successfully completed
 	// prior to cancelling the context, or you may have two processes
 	// simultaneously acting on the critical path.
 	ReleaseOnCancel bool

 	// Name is the name of the resource lock for debugging
 	Name string
 }

 // LeaderCallbacks are callbacks that are triggered during certain
 // lifecycle events of the LeaderElector. These are invoked asynchronously.
 //
 // possible future callbacks:
 //  * OnChallenge()
 type LeaderCallbacks struct {
 	// OnStartedLeading is called when a LeaderElector client starts leading
 	OnStartedLeading func(context.Context)
 	// OnStoppedLeading is called when a LeaderElector client stops leading
 	OnStoppedLeading func()
 	// OnNewLeader is called when the client observes a leader that is
 	// not the previously observed leader. This includes the first observed
 	// leader when the client starts.
 	OnNewLeader func(identity string)
 }

 // LeaderElector is a leader election client.
 type LeaderElector struct {
 	config LeaderElectionConfig
 	// internal bookkeeping
 	observedRecord rl.LeaderElectionRecord
 	observedTime   time.Time
 	// used to implement OnNewLeader(), may lag slightly from the
 	// value observedRecord.HolderIdentity if the transition has
 	// not yet been reported.
 	reportedLeader string

 	// clock is wrapper around time to allow for less flaky testing
 	clock clock.Clock

 	metrics leaderMetricsAdapter

 	// name is the name of the resource lock for debugging
 	name string
 }

 // Run starts the leader election loop
 func (le *LeaderElector) Run(ctx context.Context) {
 	defer func() {
 		runtime.HandleCrash()
 		le.config.Callbacks.OnStoppedLeading()
 	}()
 	if !le.acquire(ctx) {
 		return // ctx signalled done
 	}
 	ctx, cancel := context.WithCancel(ctx)
 	defer cancel()
 	go le.config.Callbacks.OnStartedLeading(ctx)
 	le.renew(ctx)
 }

 // RunOrDie starts a client with the provided config or panics if the config
 // fails to validate.
 func RunOrDie(ctx context.Context, lec LeaderElectionConfig) {
 	le, err := NewLeaderElector(lec)
 	if err != nil {
 		panic(err)
 	}
 	if lec.WatchDog != nil {
 		lec.WatchDog.SetLeaderElection(le)
 	}
 	le.Run(ctx)
 }

 // GetLeader returns the identity of the last observed leader or returns the empty string if
 // no leader has yet been observed.
 func (le *LeaderElector) GetLeader() string {
 	return le.observedRecord.HolderIdentity
 }

 // IsLeader returns true if the last observed leader was this client else returns false.
 func (le *LeaderElector) IsLeader() bool {
 	return le.observedRecord.HolderIdentity == le.config.Lock.Identity()
 }

 // acquire loops calling tryAcquireOrRenew and returns true immediately when tryAcquireOrRenew succeeds.
 // Returns false if ctx signals done.
 func (le *LeaderElector) acquire(ctx context.Context) bool {
 	ctx, cancel := context.WithCancel(ctx)
 	defer cancel()
 	succeeded := false
 	desc := le.config.Lock.Describe()
 	klog.Infof("attempting to acquire leader lease  %v...", desc)
 	wait.JitterUntil(func() {
 		succeeded = le.tryAcquireOrRenew()
 		le.maybeReportTransition()
 		if !succeeded {
 			klog.V(4).Infof("failed to acquire lease %v", desc)
 			return
 		}
 		le.config.Lock.RecordEvent("became leader")
 		le.metrics.leaderOn(le.config.Name)
 		klog.Infof("successfully acquired lease %v", desc)
 		cancel()
 	}, le.config.RetryPeriod, JitterFactor, true, ctx.Done())
 	return succeeded
 }

 // renew loops calling tryAcquireOrRenew and returns immediately when tryAcquireOrRenew fails or ctx signals done.
 func (le *LeaderElector) renew(ctx context.Context) {
 	ctx, cancel := context.WithCancel(ctx)
 	defer cancel()
 	wait.Until(func() {
 		timeoutCtx, timeoutCancel := context.WithTimeout(ctx, le.config.RenewDeadline)
 		defer timeoutCancel()
 		err := wait.PollImmediateUntil(le.config.RetryPeriod, func() (bool, error) {
 			done := make(chan bool, 1)
 			go func() {
 				defer close(done)
 				done <- le.tryAcquireOrRenew()
 			}()

 			select {
 			case <-timeoutCtx.Done():
 				return false, fmt.Errorf("failed to tryAcquireOrRenew %s", timeoutCtx.Err())
 			case result := <-done:
 				return result, nil
 			}
 		}, timeoutCtx.Done())

 		le.maybeReportTransition()
 		desc := le.config.Lock.Describe()
 		if err == nil {
 			klog.V(5).Infof("successfully renewed lease %v", desc)
 			return
 		}
 		le.config.Lock.RecordEvent("stopped leading")
 		le.metrics.leaderOff(le.config.Name)
 		klog.Infof("failed to renew lease %v: %v", desc, err)
 		cancel()
 	}, le.config.RetryPeriod, ctx.Done())

 	// if we hold the lease, give it up
 	if le.config.ReleaseOnCancel {
 		le.release()
 	}
 }

 // release attempts to release the leader lease if we have acquired it.
 func (le *LeaderElector) release() bool {
 	if !le.IsLeader() {
 		return true
 	}
 	leaderElectionRecord := rl.LeaderElectionRecord{
 		LeaderTransitions: le.observedRecord.LeaderTransitions,
 	}
 	if err := le.config.Lock.Update(leaderElectionRecord); err != nil {
 		klog.Errorf("Failed to release lock: %v", err)
 		return false
 	}
 	le.observedRecord = leaderElectionRecord
 	le.observedTime = le.clock.Now()
 	return true
 }

 // tryAcquireOrRenew tries to acquire a leader lease if it is not already acquired,
 // else it tries to renew the lease if it has already been acquired. Returns true
 // on success else returns false.
 func (le *LeaderElector) tryAcquireOrRenew() bool {
 	now := metav1.Now()
 	leaderElectionRecord := rl.LeaderElectionRecord{
 		HolderIdentity:       le.config.Lock.Identity(),
 		LeaseDurationSeconds: int(le.config.LeaseDuration / time.Second),
 		RenewTime:            now,
 		AcquireTime:          now,
 	}

 	// 1. obtain or create the ElectionRecord
 	oldLeaderElectionRecord, err := le.config.Lock.Get()
 	if err != nil {
 		if !errors.IsNotFound(err) {
 			klog.Errorf("error retrieving resource lock %v: %v", le.config.Lock.Describe(), err)
 			return false
 		}
 		if err = le.config.Lock.Create(leaderElectionRecord); err != nil {
 			klog.Errorf("error initially creating leader election record: %v", err)
 			return false
 		}
 		le.observedRecord = leaderElectionRecord
 		le.observedTime = le.clock.Now()
 		return true
 	}

 	// 2. Record obtained, check the Identity & Time
 	if !reflect.DeepEqual(le.observedRecord, *oldLeaderElectionRecord) {
 		le.observedRecord = *oldLeaderElectionRecord
 		le.observedTime = le.clock.Now()
 	}
 	if len(oldLeaderElectionRecord.HolderIdentity) > 0 &&
 		le.observedTime.Add(le.config.LeaseDuration).After(now.Time) &&
 		!le.IsLeader() {
 		klog.V(4).Infof("lock is held by %v and has not yet expired", oldLeaderElectionRecord.HolderIdentity)
 		return false
 	}

 	// 3. We're going to try to update. The leaderElectionRecord is set to it's default
 	// here. Let's correct it before updating.
 	if le.IsLeader() {
 		leaderElectionRecord.AcquireTime = oldLeaderElectionRecord.AcquireTime
 		leaderElectionRecord.LeaderTransitions = oldLeaderElectionRecord.LeaderTransitions
 	} else {
 		leaderElectionRecord.LeaderTransitions = oldLeaderElectionRecord.LeaderTransitions + 1
 	}

 	// update the lock itself
 	if err = le.config.Lock.Update(leaderElectionRecord); err != nil {
 		klog.Errorf("Failed to update lock: %v", err)
 		return false
 	}
 	le.observedRecord = leaderElectionRecord
 	le.observedTime = le.clock.Now()
 	return true
 }

 func (le *LeaderElector) maybeReportTransition() {
 	if le.observedRecord.HolderIdentity == le.reportedLeader {
 		return
 	}
 	le.reportedLeader = le.observedRecord.HolderIdentity
 	if le.config.Callbacks.OnNewLeader != nil {
 		go le.config.Callbacks.OnNewLeader(le.reportedLeader)
 	}
 }

 // Check will determine if the current lease is expired by more than timeout.
 func (le *LeaderElector) Check(maxTolerableExpiredLease time.Duration) error {
 	if !le.IsLeader() {
 		// Currently not concerned with the case that we are hot standby
 		return nil
 	}
 	// If we are more than timeout seconds after the lease duration that is past the timeout
 	// on the lease renew. Time to start reporting ourselves as unhealthy. We should have
 	// died but conditions like deadlock can prevent this. (See #70819)
 	if le.clock.Since(le.observedTime) > le.config.LeaseDuration+maxTolerableExpiredLease {
 		return fmt.Errorf("failed election to renew leadership on lease %s", le.config.Name)
 	}

 	return nil
 }
	/*
	Copyright 2015 The Kubernetes Authors.

	Licensed under the Apache License, Version 2.0 (the "License");
	you may not use this file except in compliance with the License.
	You may obtain a copy of the License at

	http://www.apache.org/licenses/LICENSE-2.0

	Unless required by applicable law or agreed to in writing, software
	distributed under the License is distributed on an "AS IS" BASIS,
	WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	See the License for the specific language governing permissions and
	limitations under the License.
	*/

	// Package leaderelection implements leader election of a set of endpoints.
	// It uses an annotation in the endpoints object to store the record of the
	// election state.
	//
	// This implementation does not guarantee that only one client is acting as a
	// leader (a.k.a. fencing). A client observes timestamps captured locally to
	// infer the state of the leader election. Thus the implementation is tolerant
	// to arbitrary clock skew, but is not tolerant to arbitrary clock skew rate.
	//
	// However the level of tolerance to skew rate can be configured by setting
	// RenewDeadline and LeaseDuration appropriately. The tolerance expressed as a
	// maximum tolerated ratio of time passed on the fastest node to time passed on
	// the slowest node can be approximately achieved with a configuration that sets
	// the same ratio of LeaseDuration to RenewDeadline. For example if a user wanted
	// to tolerate some nodes progressing forward in time twice as fast as other nodes,
	// the user could set LeaseDuration to 60 seconds and RenewDeadline to 30 seconds.
	//
	// While not required, some method of clock synchronization between nodes in the
	// cluster is highly recommended. It's important to keep in mind when configuring
	// this client that the tolerance to skew rate varies inversely to master
	// availability.
	//
	// Larger clusters often have a more lenient SLA for API latency. This should be
	// taken into account when configuring the client. The rate of leader transitions
	// should be monitored and RetryPeriod and LeaseDuration should be increased
	// until the rate is stable and acceptably low. It's important to keep in mind
	// when configuring this client that the tolerance to API latency varies inversely
	// to master availability.
	//
	// DISCLAIMER: this is an alpha API. This library will likely change significantly
	// or even be removed entirely in subsequent releases. Depend on this API at
	// your own risk.
	package leaderelection

	import (
	"context"
	"fmt"
	"reflect"
	"time"

	"k8s.io/apimachinery/pkg/api/errors"
	metav1 "k8s.io/apimachinery/pkg/apis/meta/v1"
	"k8s.io/apimachinery/pkg/util/clock"
	"k8s.io/apimachinery/pkg/util/runtime"
	"k8s.io/apimachinery/pkg/util/wait"
	rl "k8s.io/client-go/tools/leaderelection/resourcelock"

	"k8s.io/klog"
	)

	const (
	JitterFactor = 1.2
	)

	// NewLeaderElector creates a LeaderElector from a LeaderElectionConfig
	func NewLeaderElector(lec LeaderElectionConfig) (*LeaderElector, error) {
	if lec.LeaseDuration <= lec.RenewDeadline {
	return nil, fmt.Errorf("leaseDuration must be greater than renewDeadline")
	}
	if lec.RenewDeadline <= time.Duration(JitterFactor*float64(lec.RetryPeriod)) {
	return nil, fmt.Errorf("renewDeadline must be greater than retryPeriod*JitterFactor")
	}
	if lec.LeaseDuration < 1 {
	return nil, fmt.Errorf("leaseDuration must be greater than zero")
	}
	if lec.RenewDeadline < 1 {
	return nil, fmt.Errorf("renewDeadline must be greater than zero")
	}
	if lec.RetryPeriod < 1 {
	return nil, fmt.Errorf("retryPeriod must be greater than zero")
	}

	if lec.Lock == nil {
	return nil, fmt.Errorf("Lock must not be nil.")
	}
	le := LeaderElector{
	config: lec,
	clock: clock.RealClock{},
	metrics: globalMetricsFactory.newLeaderMetrics(),
	}
	le.metrics.leaderOff(le.config.Name)
	return &le, nil
	}

	type LeaderElectionConfig struct {
	// Lock is the resource that will be used for locking
	Lock rl.Interface

	// LeaseDuration is the duration that non-leader candidates will
	// wait to force acquire leadership. This is measured against time of
	// last observed ack.
	LeaseDuration time.Duration
	// RenewDeadline is the duration that the acting master will retry
	// refreshing leadership before giving up.
	RenewDeadline time.Duration
	// RetryPeriod is the duration the LeaderElector clients should wait
	// between tries of actions.
	RetryPeriod time.Duration

	// Callbacks are callbacks that are triggered during certain lifecycle
	// events of the LeaderElector
	Callbacks LeaderCallbacks

	// WatchDog is the associated health checker
	// WatchDog may be null if its not needed/configured.
	WatchDog *HealthzAdaptor

	// ReleaseOnCancel should be set true if the lock should be released
	// when the run context is cancelled. If you set this to true, you must
	// ensure all code guarded by this lease has successfully completed
	// prior to cancelling the context, or you may have two processes
	// simultaneously acting on the critical path.
	ReleaseOnCancel bool

	// Name is the name of the resource lock for debugging
	Name string
	}

	// LeaderCallbacks are callbacks that are triggered during certain
	// lifecycle events of the LeaderElector. These are invoked asynchronously.
	//
	// possible future callbacks:
	// * OnChallenge()
	type LeaderCallbacks struct {
	// OnStartedLeading is called when a LeaderElector client starts leading
	OnStartedLeading func(context.Context)
	// OnStoppedLeading is called when a LeaderElector client stops leading
	OnStoppedLeading func()
	// OnNewLeader is called when the client observes a leader that is
	// not the previously observed leader. This includes the first observed
	// leader when the client starts.
	OnNewLeader func(identity string)
	}

	// LeaderElector is a leader election client.
	type LeaderElector struct {
	config LeaderElectionConfig
	// internal bookkeeping
	observedRecord rl.LeaderElectionRecord
	observedTime time.Time
	// used to implement OnNewLeader(), may lag slightly from the
	// value observedRecord.HolderIdentity if the transition has
	// not yet been reported.
	reportedLeader string

	// clock is wrapper around time to allow for less flaky testing
	clock clock.Clock

	metrics leaderMetricsAdapter

	// name is the name of the resource lock for debugging
	name string
	}

	// Run starts the leader election loop
	func (le *LeaderElector) Run(ctx context.Context) {
	defer func() {
	runtime.HandleCrash()
	le.config.Callbacks.OnStoppedLeading()
	}()
	if !le.acquire(ctx) {
	return // ctx signalled done
	}
	ctx, cancel := context.WithCancel(ctx)
	defer cancel()
	go le.config.Callbacks.OnStartedLeading(ctx)
	le.renew(ctx)
	}

	// RunOrDie starts a client with the provided config or panics if the config
	// fails to validate.
	func RunOrDie(ctx context.Context, lec LeaderElectionConfig) {
	le, err := NewLeaderElector(lec)
	if err != nil {
	panic(err)
	}
	if lec.WatchDog != nil {
	lec.WatchDog.SetLeaderElection(le)
	}
	le.Run(ctx)
	}

	// GetLeader returns the identity of the last observed leader or returns the empty string if
	// no leader has yet been observed.
	func (le *LeaderElector) GetLeader() string {
	return le.observedRecord.HolderIdentity
	}

	// IsLeader returns true if the last observed leader was this client else returns false.
	func (le *LeaderElector) IsLeader() bool {
	return le.observedRecord.HolderIdentity == le.config.Lock.Identity()
	}

	// acquire loops calling tryAcquireOrRenew and returns true immediately when tryAcquireOrRenew succeeds.
	// Returns false if ctx signals done.
	func (le *LeaderElector) acquire(ctx context.Context) bool {
	ctx, cancel := context.WithCancel(ctx)
	defer cancel()
	succeeded := false
	desc := le.config.Lock.Describe()
	klog.Infof("attempting to acquire leader lease %v...", desc)
	wait.JitterUntil(func() {
	succeeded = le.tryAcquireOrRenew()
	le.maybeReportTransition()
	if !succeeded {
	klog.V(4).Infof("failed to acquire lease %v", desc)
	return
	}
	le.config.Lock.RecordEvent("became leader")
	le.metrics.leaderOn(le.config.Name)
	klog.Infof("successfully acquired lease %v", desc)
	cancel()
	}, le.config.RetryPeriod, JitterFactor, true, ctx.Done())
	return succeeded
	}

	// renew loops calling tryAcquireOrRenew and returns immediately when tryAcquireOrRenew fails or ctx signals done.
	func (le *LeaderElector) renew(ctx context.Context) {
	ctx, cancel := context.WithCancel(ctx)
	defer cancel()
	wait.Until(func() {
	timeoutCtx, timeoutCancel := context.WithTimeout(ctx, le.config.RenewDeadline)
	defer timeoutCancel()
	err := wait.PollImmediateUntil(le.config.RetryPeriod, func() (bool, error) {
	done := make(chan bool, 1)
	go func() {
	defer close(done)
	done <- le.tryAcquireOrRenew()
	}()

	select {
	case <-timeoutCtx.Done():
	return false, fmt.Errorf("failed to tryAcquireOrRenew %s", timeoutCtx.Err())
	case result := <-done:
	return result, nil
	}
	}, timeoutCtx.Done())

	le.maybeReportTransition()
	desc := le.config.Lock.Describe()
	if err == nil {
	klog.V(5).Infof("successfully renewed lease %v", desc)
	return
	}
	le.config.Lock.RecordEvent("stopped leading")
	le.metrics.leaderOff(le.config.Name)
	klog.Infof("failed to renew lease %v: %v", desc, err)
	cancel()
	}, le.config.RetryPeriod, ctx.Done())

	// if we hold the lease, give it up
	if le.config.ReleaseOnCancel {
	le.release()
	}
	}

	// release attempts to release the leader lease if we have acquired it.
	func (le *LeaderElector) release() bool {
	if !le.IsLeader() {
	return true
	}
	leaderElectionRecord := rl.LeaderElectionRecord{
	LeaderTransitions: le.observedRecord.LeaderTransitions,
	}
	if err := le.config.Lock.Update(leaderElectionRecord); err != nil {
	klog.Errorf("Failed to release lock: %v", err)
	return false
	}
	le.observedRecord = leaderElectionRecord
	le.observedTime = le.clock.Now()
	return true
	}

	// tryAcquireOrRenew tries to acquire a leader lease if it is not already acquired,
	// else it tries to renew the lease if it has already been acquired. Returns true
	// on success else returns false.
	func (le *LeaderElector) tryAcquireOrRenew() bool {
	now := metav1.Now()
	leaderElectionRecord := rl.LeaderElectionRecord{
	HolderIdentity: le.config.Lock.Identity(),
	LeaseDurationSeconds: int(le.config.LeaseDuration / time.Second),
	RenewTime: now,
	AcquireTime: now,
	}

	// 1. obtain or create the ElectionRecord
	oldLeaderElectionRecord, err := le.config.Lock.Get()
	if err != nil {
	if !errors.IsNotFound(err) {
	klog.Errorf("error retrieving resource lock %v: %v", le.config.Lock.Describe(), err)
	return false
	}
	if err = le.config.Lock.Create(leaderElectionRecord); err != nil {
	klog.Errorf("error initially creating leader election record: %v", err)
	return false
	}
	le.observedRecord = leaderElectionRecord
	le.observedTime = le.clock.Now()
	return true
	}

	// 2. Record obtained, check the Identity & Time
	if !reflect.DeepEqual(le.observedRecord, *oldLeaderElectionRecord) {
	le.observedRecord = *oldLeaderElectionRecord
	le.observedTime = le.clock.Now()
	}
	if len(oldLeaderElectionRecord.HolderIdentity) > 0 &&
	le.observedTime.Add(le.config.LeaseDuration).After(now.Time) &&
	!le.IsLeader() {
	klog.V(4).Infof("lock is held by %v and has not yet expired", oldLeaderElectionRecord.HolderIdentity)
	return false
	}

	// 3. We're going to try to update. The leaderElectionRecord is set to it's default
	// here. Let's correct it before updating.
	if le.IsLeader() {
	leaderElectionRecord.AcquireTime = oldLeaderElectionRecord.AcquireTime
	leaderElectionRecord.LeaderTransitions = oldLeaderElectionRecord.LeaderTransitions
	} else {
	leaderElectionRecord.LeaderTransitions = oldLeaderElectionRecord.LeaderTransitions + 1
	}

	// update the lock itself
	if err = le.config.Lock.Update(leaderElectionRecord); err != nil {
	klog.Errorf("Failed to update lock: %v", err)
	return false
	}
	le.observedRecord = leaderElectionRecord
	le.observedTime = le.clock.Now()
	return true
	}

	func (le *LeaderElector) maybeReportTransition() {
	if le.observedRecord.HolderIdentity == le.reportedLeader {
	return
	}
	le.reportedLeader = le.observedRecord.HolderIdentity
	if le.config.Callbacks.OnNewLeader != nil {
	go le.config.Callbacks.OnNewLeader(le.reportedLeader)
	}
	}

	// Check will determine if the current lease is expired by more than timeout.
	func (le *LeaderElector) Check(maxTolerableExpiredLease time.Duration) error {
	if !le.IsLeader() {
	// Currently not concerned with the case that we are hot standby
	return nil
	}
	// If we are more than timeout seconds after the lease duration that is past the timeout
	// on the lease renew. Time to start reporting ourselves as unhealthy. We should have
	// died but conditions like deadlock can prevent this. (See #70819)
	if le.clock.Since(le.observedTime) > le.config.LeaseDuration+maxTolerableExpiredLease {
	return fmt.Errorf("failed election to renew leadership on lease %s", le.config.Name)
	}

	return nil
	}