vendor/github.com/davecgh/go-spew/spew/doc.go - cloudstack-kubernetes-provider - Git at Google

 /*
  * Copyright (c) 2013-2016 Dave Collins <dave@davec.name>
  *
  * Permission to use, copy, modify, and distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
  * copyright notice and this permission notice appear in all copies.
  *
  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */

 /*
 Package spew implements a deep pretty printer for Go data structures to aid in
 debugging.

 A quick overview of the additional features spew provides over the built-in
 printing facilities for Go data types are as follows:

 	* Pointers are dereferenced and followed
 	* Circular data structures are detected and handled properly
 	* Custom Stringer/error interfaces are optionally invoked, including
 	  on unexported types
 	* Custom types which only implement the Stringer/error interfaces via
 	  a pointer receiver are optionally invoked when passing non-pointer
 	  variables
 	* Byte arrays and slices are dumped like the hexdump -C command which
 	  includes offsets, byte values in hex, and ASCII output (only when using
 	  Dump style)

 There are two different approaches spew allows for dumping Go data structures:

 	* Dump style which prints with newlines, customizable indentation,
 	  and additional debug information such as types and all pointer addresses
 	  used to indirect to the final value
 	* A custom Formatter interface that integrates cleanly with the standard fmt
 	  package and replaces %v, %+v, %#v, and %#+v to provide inline printing
 	  similar to the default %v while providing the additional functionality
 	  outlined above and passing unsupported format verbs such as %x and %q
 	  along to fmt

 Quick Start

 This section demonstrates how to quickly get started with spew.  See the
 sections below for further details on formatting and configuration options.

 To dump a variable with full newlines, indentation, type, and pointer
 information use Dump, Fdump, or Sdump:
 	spew.Dump(myVar1, myVar2, ...)
 	spew.Fdump(someWriter, myVar1, myVar2, ...)
 	str := spew.Sdump(myVar1, myVar2, ...)

 Alternatively, if you would prefer to use format strings with a compacted inline
 printing style, use the convenience wrappers Printf, Fprintf, etc with
 %v (most compact), %+v (adds pointer addresses), %#v (adds types), or
 %#+v (adds types and pointer addresses):
 	spew.Printf("myVar1: %v -- myVar2: %+v", myVar1, myVar2)
 	spew.Printf("myVar3: %#v -- myVar4: %#+v", myVar3, myVar4)
 	spew.Fprintf(someWriter, "myVar1: %v -- myVar2: %+v", myVar1, myVar2)
 	spew.Fprintf(someWriter, "myVar3: %#v -- myVar4: %#+v", myVar3, myVar4)

 Configuration Options

 Configuration of spew is handled by fields in the ConfigState type.  For
 convenience, all of the top-level functions use a global state available
 via the spew.Config global.

 It is also possible to create a ConfigState instance that provides methods
 equivalent to the top-level functions.  This allows concurrent configuration
 options.  See the ConfigState documentation for more details.

 The following configuration options are available:
 	* Indent
 		String to use for each indentation level for Dump functions.
 		It is a single space by default.  A popular alternative is "\t".

 	* MaxDepth
 		Maximum number of levels to descend into nested data structures.
 		There is no limit by default.

 	* DisableMethods
 		Disables invocation of error and Stringer interface methods.
 		Method invocation is enabled by default.

 	* DisablePointerMethods
 		Disables invocation of error and Stringer interface methods on types
 		which only accept pointer receivers from non-pointer variables.
 		Pointer method invocation is enabled by default.

 	* DisablePointerAddresses
 		DisablePointerAddresses specifies whether to disable the printing of
 		pointer addresses. This is useful when diffing data structures in tests.

 	* DisableCapacities
 		DisableCapacities specifies whether to disable the printing of
 		capacities for arrays, slices, maps and channels. This is useful when
 		diffing data structures in tests.

 	* ContinueOnMethod
 		Enables recursion into types after invoking error and Stringer interface
 		methods. Recursion after method invocation is disabled by default.

 	* SortKeys
 		Specifies map keys should be sorted before being printed. Use
 		this to have a more deterministic, diffable output.  Note that
 		only native types (bool, int, uint, floats, uintptr and string)
 		and types which implement error or Stringer interfaces are
 		supported with other types sorted according to the
 		reflect.Value.String() output which guarantees display
 		stability.  Natural map order is used by default.

 	* SpewKeys
 		Specifies that, as a last resort attempt, map keys should be
 		spewed to strings and sorted by those strings.  This is only
 		considered if SortKeys is true.

 Dump Usage

 Simply call spew.Dump with a list of variables you want to dump:

 	spew.Dump(myVar1, myVar2, ...)

 You may also call spew.Fdump if you would prefer to output to an arbitrary
 io.Writer.  For example, to dump to standard error:

 	spew.Fdump(os.Stderr, myVar1, myVar2, ...)

 A third option is to call spew.Sdump to get the formatted output as a string:

 	str := spew.Sdump(myVar1, myVar2, ...)

 Sample Dump Output

 See the Dump example for details on the setup of the types and variables being
 shown here.

 	(main.Foo) {
 	 unexportedField: (*main.Bar)(0xf84002e210)({
 	  flag: (main.Flag) flagTwo,
 	  data: (uintptr) <nil>
 	 }),
 	 ExportedField: (map[interface {}]interface {}) (len=1) {
 	  (string) (len=3) "one": (bool) true
 	 }
 	}

 Byte (and uint8) arrays and slices are displayed uniquely like the hexdump -C
 command as shown.
 	([]uint8) (len=32 cap=32) {
 	 00000000  11 12 13 14 15 16 17 18  19 1a 1b 1c 1d 1e 1f 20  |............... |
 	 00000010  21 22 23 24 25 26 27 28  29 2a 2b 2c 2d 2e 2f 30  |!"#$%&'()*+,-./0|
 	 00000020  31 32                                             |12|
 	}

 Custom Formatter

 Spew provides a custom formatter that implements the fmt.Formatter interface
 so that it integrates cleanly with standard fmt package printing functions. The
 formatter is useful for inline printing of smaller data types similar to the
 standard %v format specifier.

 The custom formatter only responds to the %v (most compact), %+v (adds pointer
 addresses), %#v (adds types), or %#+v (adds types and pointer addresses) verb
 combinations.  Any other verbs such as %x and %q will be sent to the the
 standard fmt package for formatting.  In addition, the custom formatter ignores
 the width and precision arguments (however they will still work on the format
 specifiers not handled by the custom formatter).

 Custom Formatter Usage

 The simplest way to make use of the spew custom formatter is to call one of the
 convenience functions such as spew.Printf, spew.Println, or spew.Printf.  The
 functions have syntax you are most likely already familiar with:

 	spew.Printf("myVar1: %v -- myVar2: %+v", myVar1, myVar2)
 	spew.Printf("myVar3: %#v -- myVar4: %#+v", myVar3, myVar4)
 	spew.Println(myVar, myVar2)
 	spew.Fprintf(os.Stderr, "myVar1: %v -- myVar2: %+v", myVar1, myVar2)
 	spew.Fprintf(os.Stderr, "myVar3: %#v -- myVar4: %#+v", myVar3, myVar4)

 See the Index for the full list convenience functions.

 Sample Formatter Output

 Double pointer to a uint8:
 	  %v: <**>5
 	 %+v: <**>(0xf8400420d0->0xf8400420c8)5
 	 %#v: (**uint8)5
 	%#+v: (**uint8)(0xf8400420d0->0xf8400420c8)5

 Pointer to circular struct with a uint8 field and a pointer to itself:
 	  %v: <*>{1 <*><shown>}
 	 %+v: <*>(0xf84003e260){ui8:1 c:<*>(0xf84003e260)<shown>}
 	 %#v: (*main.circular){ui8:(uint8)1 c:(*main.circular)<shown>}
 	%#+v: (*main.circular)(0xf84003e260){ui8:(uint8)1 c:(*main.circular)(0xf84003e260)<shown>}

 See the Printf example for details on the setup of variables being shown
 here.

 Errors

 Since it is possible for custom Stringer/error interfaces to panic, spew
 detects them and handles them internally by printing the panic information
 inline with the output.  Since spew is intended to provide deep pretty printing
 capabilities on structures, it intentionally does not return any errors.
 */
 package spew
	/*
	* Copyright (c) 2013-2016 Dave Collins <dave@davec.name>
	*
	* Permission to use, copy, modify, and distribute this software for any
	* purpose with or without fee is hereby granted, provided that the above
	* copyright notice and this permission notice appear in all copies.
	*
	* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
	* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
	* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
	* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
	* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
	* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
	* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
	*/

	/*
	Package spew implements a deep pretty printer for Go data structures to aid in
	debugging.

	A quick overview of the additional features spew provides over the built-in
	printing facilities for Go data types are as follows:

	* Pointers are dereferenced and followed
	* Circular data structures are detected and handled properly
	* Custom Stringer/error interfaces are optionally invoked, including
	on unexported types
	* Custom types which only implement the Stringer/error interfaces via
	a pointer receiver are optionally invoked when passing non-pointer
	variables
	* Byte arrays and slices are dumped like the hexdump -C command which
	includes offsets, byte values in hex, and ASCII output (only when using
	Dump style)

	There are two different approaches spew allows for dumping Go data structures:

	* Dump style which prints with newlines, customizable indentation,
	and additional debug information such as types and all pointer addresses
	used to indirect to the final value
	* A custom Formatter interface that integrates cleanly with the standard fmt
	package and replaces %v, %+v, %#v, and %#+v to provide inline printing
	similar to the default %v while providing the additional functionality
	outlined above and passing unsupported format verbs such as %x and %q
	along to fmt

	Quick Start

	This section demonstrates how to quickly get started with spew. See the
	sections below for further details on formatting and configuration options.

	To dump a variable with full newlines, indentation, type, and pointer
	information use Dump, Fdump, or Sdump:
	spew.Dump(myVar1, myVar2, ...)
	spew.Fdump(someWriter, myVar1, myVar2, ...)
	str := spew.Sdump(myVar1, myVar2, ...)

	Alternatively, if you would prefer to use format strings with a compacted inline
	printing style, use the convenience wrappers Printf, Fprintf, etc with
	%v (most compact), %+v (adds pointer addresses), %#v (adds types), or
	%#+v (adds types and pointer addresses):
	spew.Printf("myVar1: %v -- myVar2: %+v", myVar1, myVar2)
	spew.Printf("myVar3: %#v -- myVar4: %#+v", myVar3, myVar4)
	spew.Fprintf(someWriter, "myVar1: %v -- myVar2: %+v", myVar1, myVar2)
	spew.Fprintf(someWriter, "myVar3: %#v -- myVar4: %#+v", myVar3, myVar4)

	Configuration Options

	Configuration of spew is handled by fields in the ConfigState type. For
	convenience, all of the top-level functions use a global state available
	via the spew.Config global.

	It is also possible to create a ConfigState instance that provides methods
	equivalent to the top-level functions. This allows concurrent configuration
	options. See the ConfigState documentation for more details.

	The following configuration options are available:
	* Indent
	String to use for each indentation level for Dump functions.
	It is a single space by default. A popular alternative is "\t".

	* MaxDepth
	Maximum number of levels to descend into nested data structures.
	There is no limit by default.

	* DisableMethods
	Disables invocation of error and Stringer interface methods.
	Method invocation is enabled by default.

	* DisablePointerMethods
	Disables invocation of error and Stringer interface methods on types
	which only accept pointer receivers from non-pointer variables.
	Pointer method invocation is enabled by default.

	* DisablePointerAddresses
	DisablePointerAddresses specifies whether to disable the printing of
	pointer addresses. This is useful when diffing data structures in tests.

	* DisableCapacities
	DisableCapacities specifies whether to disable the printing of
	capacities for arrays, slices, maps and channels. This is useful when
	diffing data structures in tests.

	* ContinueOnMethod
	Enables recursion into types after invoking error and Stringer interface
	methods. Recursion after method invocation is disabled by default.

	* SortKeys
	Specifies map keys should be sorted before being printed. Use
	this to have a more deterministic, diffable output. Note that
	only native types (bool, int, uint, floats, uintptr and string)
	and types which implement error or Stringer interfaces are
	supported with other types sorted according to the
	reflect.Value.String() output which guarantees display
	stability. Natural map order is used by default.

	* SpewKeys
	Specifies that, as a last resort attempt, map keys should be
	spewed to strings and sorted by those strings. This is only
	considered if SortKeys is true.

	Dump Usage

	Simply call spew.Dump with a list of variables you want to dump:

	spew.Dump(myVar1, myVar2, ...)

	You may also call spew.Fdump if you would prefer to output to an arbitrary
	io.Writer. For example, to dump to standard error:

	spew.Fdump(os.Stderr, myVar1, myVar2, ...)

	A third option is to call spew.Sdump to get the formatted output as a string:

	str := spew.Sdump(myVar1, myVar2, ...)

	Sample Dump Output

	See the Dump example for details on the setup of the types and variables being
	shown here.

	(main.Foo) {
	unexportedField: (*main.Bar)(0xf84002e210)({
	flag: (main.Flag) flagTwo,
	data: (uintptr) <nil>
	}),
	ExportedField: (map[interface {}]interface {}) (len=1) {
	(string) (len=3) "one": (bool) true
	}
	}

	Byte (and uint8) arrays and slices are displayed uniquely like the hexdump -C
	command as shown.
	([]uint8) (len=32 cap=32) {
	00000000 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 \|............... \|
	00000010 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f 30 \|!"#$%&'()*+,-./0\|
	00000020 31 32 \|12\|
	}

	Custom Formatter

	Spew provides a custom formatter that implements the fmt.Formatter interface
	so that it integrates cleanly with standard fmt package printing functions. The
	formatter is useful for inline printing of smaller data types similar to the
	standard %v format specifier.

	The custom formatter only responds to the %v (most compact), %+v (adds pointer
	addresses), %#v (adds types), or %#+v (adds types and pointer addresses) verb
	combinations. Any other verbs such as %x and %q will be sent to the the
	standard fmt package for formatting. In addition, the custom formatter ignores
	the width and precision arguments (however they will still work on the format
	specifiers not handled by the custom formatter).

	Custom Formatter Usage

	The simplest way to make use of the spew custom formatter is to call one of the
	convenience functions such as spew.Printf, spew.Println, or spew.Printf. The
	functions have syntax you are most likely already familiar with:

	spew.Printf("myVar1: %v -- myVar2: %+v", myVar1, myVar2)
	spew.Printf("myVar3: %#v -- myVar4: %#+v", myVar3, myVar4)
	spew.Println(myVar, myVar2)
	spew.Fprintf(os.Stderr, "myVar1: %v -- myVar2: %+v", myVar1, myVar2)
	spew.Fprintf(os.Stderr, "myVar3: %#v -- myVar4: %#+v", myVar3, myVar4)

	See the Index for the full list convenience functions.

	Sample Formatter Output

	Double pointer to a uint8:
	%v: <**>5
	%+v: <**>(0xf8400420d0->0xf8400420c8)5
	%#v: (**uint8)5
	%#+v: (**uint8)(0xf8400420d0->0xf8400420c8)5

	Pointer to circular struct with a uint8 field and a pointer to itself:
	%v: <>{1 <><shown>}
	%+v: <>(0xf84003e260){ui8:1 c:<>(0xf84003e260)<shown>}
	%#v: (main.circular){ui8:(uint8)1 c:(main.circular)<shown>}
	%#+v: (main.circular)(0xf84003e260){ui8:(uint8)1 c:(main.circular)(0xf84003e260)<shown>}

	See the Printf example for details on the setup of variables being shown
	here.

	Errors

	Since it is possible for custom Stringer/error interfaces to panic, spew
	detects them and handles them internally by printing the panic information
	inline with the output. Since spew is intended to provide deep pretty printing
	capabilities on structures, it intentionally does not return any errors.
	*/
	package spew