| # Test translations for unit tests. |
| # Copyright (C) 2016 |
| # This file is distributed under the same license as the Kubernetes package. |
| # FIRST AUTHOR brendan.d.burns@gmail.com, 2016. |
| # |
| msgid "" |
| msgstr "" |
| "Project-Id-Version: gettext-go-examples-hello\n" |
| "Report-Msgid-Bugs-To: EMAIL\n" |
| "POT-Creation-Date: 2017-03-14 21:32-0700\n" |
| "PO-Revision-Date: 2017-05-24 18:01+0800\n" |
| "Last-Translator: Brendan Burns <brendan.d.burns@gmail.com>\n" |
| "Language-Team: \n" |
| "Language: en\n" |
| "MIME-Version: 1.0\n" |
| "Content-Type: text/plain; charset=UTF-8\n" |
| "Content-Transfer-Encoding: 8bit\n" |
| "X-Generator: Poedit 1.8.12\n" |
| "X-Poedit-SourceCharset: UTF-8\n" |
| "Plural-Forms: nplurals=2; plural=(n != 1);\n" |
| |
| #: pkg/kubectl/cmd/create_clusterrolebinding.go:35 |
| msgid "" |
| "\n" |
| "\t\t # Create a ClusterRoleBinding for user1, user2, and group1 using the " |
| "cluster-admin ClusterRole\n" |
| "\t\t kubectl create clusterrolebinding cluster-admin --clusterrole=cluster-" |
| "admin --user=user1 --user=user2 --group=group1" |
| msgstr "" |
| "\n" |
| "\t\t # Create a ClusterRoleBinding for user1, user2, and group1 using the " |
| "cluster-admin ClusterRole\n" |
| "\t\t kubectl create clusterrolebinding cluster-admin --clusterrole=cluster-" |
| "admin --user=user1 --user=user2 --group=group1" |
| |
| #: pkg/kubectl/cmd/create_rolebinding.go:35 |
| msgid "" |
| "\n" |
| "\t\t # Create a RoleBinding for user1, user2, and group1 using the admin " |
| "ClusterRole\n" |
| "\t\t kubectl create rolebinding admin --clusterrole=admin --user=user1 --" |
| "user=user2 --group=group1" |
| msgstr "" |
| "\n" |
| "\t\t # Create a RoleBinding for user1, user2, and group1 using the admin " |
| "ClusterRole\n" |
| "\t\t kubectl create rolebinding admin --clusterrole=admin --user=user1 --" |
| "user=user2 --group=group1" |
| |
| #: pkg/kubectl/cmd/create_configmap.go:44 |
| msgid "" |
| "\n" |
| "\t\t # Create a new configmap named my-config based on folder bar\n" |
| "\t\t kubectl create configmap my-config --from-file=path/to/bar\n" |
| "\n" |
| "\t\t # Create a new configmap named my-config with specified keys instead " |
| "of file basenames on disk\n" |
| "\t\t kubectl create configmap my-config --from-file=key1=/path/to/bar/file1." |
| "txt --from-file=key2=/path/to/bar/file2.txt\n" |
| "\n" |
| "\t\t # Create a new configmap named my-config with key1=config1 and " |
| "key2=config2\n" |
| "\t\t kubectl create configmap my-config --from-literal=key1=config1 --from-" |
| "literal=key2=config2" |
| msgstr "" |
| "\n" |
| "\t\t # Create a new configmap named my-config based on folder bar\n" |
| "\t\t kubectl create configmap my-config --from-file=path/to/bar\n" |
| "\n" |
| "\t\t # Create a new configmap named my-config with specified keys instead " |
| "of file basenames on disk\n" |
| "\t\t kubectl create configmap my-config --from-file=key1=/path/to/bar/file1." |
| "txt --from-file=key2=/path/to/bar/file2.txt\n" |
| "\n" |
| "\t\t # Create a new configmap named my-config with key1=config1 and " |
| "key2=config2\n" |
| "\t\t kubectl create configmap my-config --from-literal=key1=config1 --from-" |
| "literal=key2=config2" |
| |
| #: pkg/kubectl/cmd/create_secret.go:135 |
| msgid "" |
| "\n" |
| "\t\t # If you don't already have a .dockercfg file, you can create a " |
| "dockercfg secret directly by using:\n" |
| "\t\t kubectl create secret docker-registry my-secret --docker-" |
| "server=DOCKER_REGISTRY_SERVER --docker-username=DOCKER_USER --docker-" |
| "password=DOCKER_PASSWORD --docker-email=DOCKER_EMAIL" |
| msgstr "" |
| "\n" |
| "\t\t # If you don't already have a .dockercfg file, you can create a " |
| "dockercfg secret directly by using:\n" |
| "\t\t kubectl create secret docker-registry my-secret --docker-" |
| "server=DOCKER_REGISTRY_SERVER --docker-username=DOCKER_USER --docker-" |
| "password=DOCKER_PASSWORD --docker-email=DOCKER_EMAIL" |
| |
| #: pkg/kubectl/cmd/top_node.go:65 |
| msgid "" |
| "\n" |
| "\t\t # Show metrics for all nodes\n" |
| "\t\t kubectl top node\n" |
| "\n" |
| "\t\t # Show metrics for a given node\n" |
| "\t\t kubectl top node NODE_NAME" |
| msgstr "" |
| "\n" |
| "\t\t # Show metrics for all nodes\n" |
| "\t\t kubectl top node\n" |
| "\n" |
| "\t\t # Show metrics for a given node\n" |
| "\t\t kubectl top node NODE_NAME" |
| |
| #: pkg/kubectl/cmd/apply.go:84 |
| msgid "" |
| "\n" |
| "\t\t# Apply the configuration in pod.json to a pod.\n" |
| "\t\tkubectl apply -f ./pod.json\n" |
| "\n" |
| "\t\t# Apply the JSON passed into stdin to a pod.\n" |
| "\t\tcat pod.json | kubectl apply -f -\n" |
| "\n" |
| "\t\t# Note: --prune is still in Alpha\n" |
| "\t\t# Apply the configuration in manifest.yaml that matches label app=nginx " |
| "and delete all the other resources that are not in the file and match label " |
| "app=nginx.\n" |
| "\t\tkubectl apply --prune -f manifest.yaml -l app=nginx\n" |
| "\n" |
| "\t\t# Apply the configuration in manifest.yaml and delete all the other " |
| "configmaps that are not in the file.\n" |
| "\t\tkubectl apply --prune -f manifest.yaml --all --prune-whitelist=core/v1/" |
| "ConfigMap" |
| msgstr "" |
| "\n" |
| "\t\t# Apply the configuration in pod.json to a pod.\n" |
| "\t\tkubectl apply -f ./pod.json\n" |
| "\n" |
| "\t\t# Apply the JSON passed into stdin to a pod.\n" |
| "\t\tcat pod.json | kubectl apply -f -\n" |
| "\n" |
| "\t\t# Note: --prune is still in Alpha\n" |
| "\t\t# Apply the configuration in manifest.yaml that matches label app=nginx " |
| "and delete all the other resources that are not in the file and match label " |
| "app=nginx.\n" |
| "\t\tkubectl apply --prune -f manifest.yaml -l app=nginx\n" |
| "\n" |
| "\t\t# Apply the configuration in manifest.yaml and delete all the other " |
| "configmaps that are not in the file.\n" |
| "\t\tkubectl apply --prune -f manifest.yaml --all --prune-whitelist=core/v1/" |
| "ConfigMap" |
| |
| #: pkg/kubectl/cmd/autoscale.go:40 |
| #, c-format |
| msgid "" |
| "\n" |
| "\t\t# Auto scale a deployment \"foo\", with the number of pods between 2 and " |
| "10, no target CPU utilization specified so a default autoscaling policy will " |
| "be used:\n" |
| "\t\tkubectl autoscale deployment foo --min=2 --max=10\n" |
| "\n" |
| "\t\t# Auto scale a replication controller \"foo\", with the number of pods " |
| "between 1 and 5, target CPU utilization at 80%:\n" |
| "\t\tkubectl autoscale rc foo --max=5 --cpu-percent=80" |
| msgstr "" |
| "\n" |
| "\t\t# Auto scale a deployment \"foo\", with the number of pods between 2 and " |
| "10, no target CPU utilization specified so a default autoscaling policy will " |
| "be used:\n" |
| "\t\tkubectl autoscale deployment foo --min=2 --max=10\n" |
| "\n" |
| "\t\t# Auto scale a replication controller \"foo\", with the number of pods " |
| "between 1 and 5, target CPU utilization at 80%:\n" |
| "\t\tkubectl autoscale rc foo --max=5 --cpu-percent=80" |
| |
| #: pkg/kubectl/cmd/convert.go:49 |
| msgid "" |
| "\n" |
| "\t\t# Convert 'pod.yaml' to latest version and print to stdout.\n" |
| "\t\tkubectl convert -f pod.yaml\n" |
| "\n" |
| "\t\t# Convert the live state of the resource specified by 'pod.yaml' to the " |
| "latest version\n" |
| "\t\t# and print to stdout in json format.\n" |
| "\t\tkubectl convert -f pod.yaml --local -o json\n" |
| "\n" |
| "\t\t# Convert all files under current directory to latest version and create " |
| "them all.\n" |
| "\t\tkubectl convert -f . | kubectl create -f -" |
| msgstr "" |
| "\n" |
| "\t\t# Convert 'pod.yaml' to latest version and print to stdout.\n" |
| "\t\tkubectl convert -f pod.yaml\n" |
| "\n" |
| "\t\t# Convert the live state of the resource specified by 'pod.yaml' to the " |
| "latest version\n" |
| "\t\t# and print to stdout in json format.\n" |
| "\t\tkubectl convert -f pod.yaml --local -o json\n" |
| "\n" |
| "\t\t# Convert all files under current directory to latest version and create " |
| "them all.\n" |
| "\t\tkubectl convert -f . | kubectl create -f -" |
| |
| #: pkg/kubectl/cmd/create_clusterrole.go:34 |
| msgid "" |
| "\n" |
| "\t\t# Create a ClusterRole named \"pod-reader\" that allows user to perform " |
| "\"get\", \"watch\" and \"list\" on pods\n" |
| "\t\tkubectl create clusterrole pod-reader --verb=get,list,watch --" |
| "resource=pods\n" |
| "\n" |
| "\t\t# Create a ClusterRole named \"pod-reader\" with ResourceName specified\n" |
| "\t\tkubectl create clusterrole pod-reader --verb=get,list,watch --" |
| "resource=pods --resource-name=readablepod" |
| msgstr "" |
| "\n" |
| "\t\t# Create a ClusterRole named \"pod-reader\" that allows user to perform " |
| "\"get\", \"watch\" and \"list\" on pods\n" |
| "\t\tkubectl create clusterrole pod-reader --verb=get,list,watch --" |
| "resource=pods\n" |
| "\n" |
| "\t\t# Create a ClusterRole named \"pod-reader\" with ResourceName specified\n" |
| "\t\tkubectl create clusterrole pod-reader --verb=get,list,watch --" |
| "resource=pods --resource-name=readablepod" |
| |
| #: pkg/kubectl/cmd/create_role.go:41 |
| msgid "" |
| "\n" |
| "\t\t# Create a Role named \"pod-reader\" that allows user to perform \"get" |
| "\", \"watch\" and \"list\" on pods\n" |
| "\t\tkubectl create role pod-reader --verb=get --verb=list --verb=watch --" |
| "resource=pods\n" |
| "\n" |
| "\t\t# Create a Role named \"pod-reader\" with ResourceName specified\n" |
| "\t\tkubectl create role pod-reader --verb=get --verg=list --verb=watch --" |
| "resource=pods --resource-name=readablepod" |
| msgstr "" |
| "\n" |
| "\t\t# Create a Role named \"pod-reader\" that allows user to perform \"get" |
| "\", \"watch\" and \"list\" on pods\n" |
| "\t\tkubectl create role pod-reader --verb=get --verb=list --verb=watch --" |
| "resource=pods\n" |
| "\n" |
| "\t\t# Create a Role named \"pod-reader\" with ResourceName specified\n" |
| "\t\tkubectl create role pod-reader --verb=get --verg=list --verb=watch --" |
| "resource=pods --resource-name=readablepod" |
| |
| #: pkg/kubectl/cmd/create_quota.go:35 |
| msgid "" |
| "\n" |
| "\t\t# Create a new resourcequota named my-quota\n" |
| "\t\tkubectl create quota my-quota --hard=cpu=1,memory=1G,pods=2,services=3," |
| "replicationcontrollers=2,resourcequotas=1,secrets=5," |
| "persistentvolumeclaims=10\n" |
| "\n" |
| "\t\t# Create a new resourcequota named best-effort\n" |
| "\t\tkubectl create quota best-effort --hard=pods=100 --scopes=BestEffort" |
| msgstr "" |
| "\n" |
| "\t\t# Create a new resourcequota named my-quota\n" |
| "\t\tkubectl create quota my-quota --hard=cpu=1,memory=1G,pods=2,services=3," |
| "replicationcontrollers=2,resourcequotas=1,secrets=5," |
| "persistentvolumeclaims=10\n" |
| "\n" |
| "\t\t# Create a new resourcequota named best-effort\n" |
| "\t\tkubectl create quota best-effort --hard=pods=100 --scopes=BestEffort" |
| |
| #: pkg/kubectl/cmd/create_pdb.go:35 |
| #, c-format |
| msgid "" |
| "\n" |
| "\t\t# Create a pod disruption budget named my-pdb that will select all pods " |
| "with the app=rails label\n" |
| "\t\t# and require at least one of them being available at any point in " |
| "time.\n" |
| "\t\tkubectl create poddisruptionbudget my-pdb --selector=app=rails --min-" |
| "available=1\n" |
| "\n" |
| "\t\t# Create a pod disruption budget named my-pdb that will select all pods " |
| "with the app=nginx label\n" |
| "\t\t# and require at least half of the pods selected to be available at any " |
| "point in time.\n" |
| "\t\tkubectl create pdb my-pdb --selector=app=nginx --min-available=50%" |
| msgstr "" |
| "\n" |
| "\t\t# Create a pod disruption budget named my-pdb that will select all pods " |
| "with the app=rails label\n" |
| "\t\t# and require at least one of them being available at any point in " |
| "time.\n" |
| "\t\tkubectl create poddisruptionbudget my-pdb --selector=app=rails --min-" |
| "available=1\n" |
| "\n" |
| "\t\t# Create a pod disruption budget named my-pdb that will select all pods " |
| "with the app=nginx label\n" |
| "\t\t# and require at least half of the pods selected to be available at any " |
| "point in time.\n" |
| "\t\tkubectl create pdb my-pdb --selector=app=nginx --min-available=50%" |
| |
| #: pkg/kubectl/cmd/create.go:47 |
| msgid "" |
| "\n" |
| "\t\t# Create a pod using the data in pod.json.\n" |
| "\t\tkubectl create -f ./pod.json\n" |
| "\n" |
| "\t\t# Create a pod based on the JSON passed into stdin.\n" |
| "\t\tcat pod.json | kubectl create -f -\n" |
| "\n" |
| "\t\t# Edit the data in docker-registry.yaml in JSON using the v1 API format " |
| "then create the resource using the edited data.\n" |
| "\t\tkubectl create -f docker-registry.yaml --edit --output-version=v1 -o json" |
| msgstr "" |
| "\n" |
| "\t\t# Create a pod using the data in pod.json.\n" |
| "\t\tkubectl create -f ./pod.json\n" |
| "\n" |
| "\t\t# Create a pod based on the JSON passed into stdin.\n" |
| "\t\tcat pod.json | kubectl create -f -\n" |
| "\n" |
| "\t\t# Edit the data in docker-registry.yaml in JSON using the v1 API format " |
| "then create the resource using the edited data.\n" |
| "\t\tkubectl create -f docker-registry.yaml --edit --output-version=v1 -o json" |
| |
| #: pkg/kubectl/cmd/expose.go:53 |
| msgid "" |
| "\n" |
| "\t\t# Create a service for a replicated nginx, which serves on port 80 and " |
| "connects to the containers on port 8000.\n" |
| "\t\tkubectl expose rc nginx --port=80 --target-port=8000\n" |
| "\n" |
| "\t\t# Create a service for a replication controller identified by type and " |
| "name specified in \"nginx-controller.yaml\", which serves on port 80 and " |
| "connects to the containers on port 8000.\n" |
| "\t\tkubectl expose -f nginx-controller.yaml --port=80 --target-port=8000\n" |
| "\n" |
| "\t\t# Create a service for a pod valid-pod, which serves on port 444 with " |
| "the name \"frontend\"\n" |
| "\t\tkubectl expose pod valid-pod --port=444 --name=frontend\n" |
| "\n" |
| "\t\t# Create a second service based on the above service, exposing the " |
| "container port 8443 as port 443 with the name \"nginx-https\"\n" |
| "\t\tkubectl expose service nginx --port=443 --target-port=8443 --name=nginx-" |
| "https\n" |
| "\n" |
| "\t\t# Create a service for a replicated streaming application on port 4100 " |
| "balancing UDP traffic and named 'video-stream'.\n" |
| "\t\tkubectl expose rc streamer --port=4100 --protocol=udp --name=video-" |
| "stream\n" |
| "\n" |
| "\t\t# Create a service for a replicated nginx using replica set, which " |
| "serves on port 80 and connects to the containers on port 8000.\n" |
| "\t\tkubectl expose rs nginx --port=80 --target-port=8000\n" |
| "\n" |
| "\t\t# Create a service for an nginx deployment, which serves on port 80 and " |
| "connects to the containers on port 8000.\n" |
| "\t\tkubectl expose deployment nginx --port=80 --target-port=8000" |
| msgstr "" |
| "\n" |
| "\t\t# Create a service for a replicated nginx, which serves on port 80 and " |
| "connects to the containers on port 8000.\n" |
| "\t\tkubectl expose rc nginx --port=80 --target-port=8000\n" |
| "\n" |
| "\t\t# Create a service for a replication controller identified by type and " |
| "name specified in \"nginx-controller.yaml\", which serves on port 80 and " |
| "connects to the containers on port 8000.\n" |
| "\t\tkubectl expose -f nginx-controller.yaml --port=80 --target-port=8000\n" |
| "\n" |
| "\t\t# Create a service for a pod valid-pod, which serves on port 444 with " |
| "the name \"frontend\"\n" |
| "\t\tkubectl expose pod valid-pod --port=444 --name=frontend\n" |
| "\n" |
| "\t\t# Create a second service based on the above service, exposing the " |
| "container port 8443 as port 443 with the name \"nginx-https\"\n" |
| "\t\tkubectl expose service nginx --port=443 --target-port=8443 --name=nginx-" |
| "https\n" |
| "\n" |
| "\t\t# Create a service for a replicated streaming application on port 4100 " |
| "balancing UDP traffic and named 'video-stream'.\n" |
| "\t\tkubectl expose rc streamer --port=4100 --protocol=udp --name=video-" |
| "stream\n" |
| "\n" |
| "\t\t# Create a service for a replicated nginx using replica set, which " |
| "serves on port 80 and connects to the containers on port 8000.\n" |
| "\t\tkubectl expose rs nginx --port=80 --target-port=8000\n" |
| "\n" |
| "\t\t# Create a service for an nginx deployment, which serves on port 80 and " |
| "connects to the containers on port 8000.\n" |
| "\t\tkubectl expose deployment nginx --port=80 --target-port=8000" |
| |
| #: pkg/kubectl/cmd/delete.go:68 |
| msgid "" |
| "\n" |
| "\t\t# Delete a pod using the type and name specified in pod.json.\n" |
| "\t\tkubectl delete -f ./pod.json\n" |
| "\n" |
| "\t\t# Delete a pod based on the type and name in the JSON passed into " |
| "stdin.\n" |
| "\t\tcat pod.json | kubectl delete -f -\n" |
| "\n" |
| "\t\t# Delete pods and services with same names \"baz\" and \"foo\"\n" |
| "\t\tkubectl delete pod,service baz foo\n" |
| "\n" |
| "\t\t# Delete pods and services with label name=myLabel.\n" |
| "\t\tkubectl delete pods,services -l name=myLabel\n" |
| "\n" |
| "\t\t# Delete a pod with minimal delay\n" |
| "\t\tkubectl delete pod foo --now\n" |
| "\n" |
| "\t\t# Force delete a pod on a dead node\n" |
| "\t\tkubectl delete pod foo --grace-period=0 --force\n" |
| "\n" |
| "\t\t# Delete all pods\n" |
| "\t\tkubectl delete pods --all" |
| msgstr "" |
| "\n" |
| "\t\t# Delete a pod using the type and name specified in pod.json.\n" |
| "\t\tkubectl delete -f ./pod.json\n" |
| "\n" |
| "\t\t# Delete a pod based on the type and name in the JSON passed into " |
| "stdin.\n" |
| "\t\tcat pod.json | kubectl delete -f -\n" |
| "\n" |
| "\t\t# Delete pods and services with same names \"baz\" and \"foo\"\n" |
| "\t\tkubectl delete pod,service baz foo\n" |
| "\n" |
| "\t\t# Delete pods and services with label name=myLabel.\n" |
| "\t\tkubectl delete pods,services -l name=myLabel\n" |
| "\n" |
| "\t\t# Delete a pod with minimal delay\n" |
| "\t\tkubectl delete pod foo --now\n" |
| "\n" |
| "\t\t# Force delete a pod on a dead node\n" |
| "\t\tkubectl delete pod foo --grace-period=0 --force\n" |
| "\n" |
| "\t\t# Delete all pods\n" |
| "\t\tkubectl delete pods --all" |
| |
| #: pkg/kubectl/cmd/describe.go:54 |
| msgid "" |
| "\n" |
| "\t\t# Describe a node\n" |
| "\t\tkubectl describe nodes kubernetes-node-emt8.c.myproject.internal\n" |
| "\n" |
| "\t\t# Describe a pod\n" |
| "\t\tkubectl describe pods/nginx\n" |
| "\n" |
| "\t\t# Describe a pod identified by type and name in \"pod.json\"\n" |
| "\t\tkubectl describe -f pod.json\n" |
| "\n" |
| "\t\t# Describe all pods\n" |
| "\t\tkubectl describe pods\n" |
| "\n" |
| "\t\t# Describe pods by label name=myLabel\n" |
| "\t\tkubectl describe po -l name=myLabel\n" |
| "\n" |
| "\t\t# Describe all pods managed by the 'frontend' replication controller (rc-" |
| "created pods\n" |
| "\t\t# get the name of the rc as a prefix in the pod the name).\n" |
| "\t\tkubectl describe pods frontend" |
| msgstr "" |
| "\n" |
| "\t\t# Describe a node\n" |
| "\t\tkubectl describe nodes kubernetes-node-emt8.c.myproject.internal\n" |
| "\n" |
| "\t\t# Describe a pod\n" |
| "\t\tkubectl describe pods/nginx\n" |
| "\n" |
| "\t\t# Describe a pod identified by type and name in \"pod.json\"\n" |
| "\t\tkubectl describe -f pod.json\n" |
| "\n" |
| "\t\t# Describe all pods\n" |
| "\t\tkubectl describe pods\n" |
| "\n" |
| "\t\t# Describe pods by label name=myLabel\n" |
| "\t\tkubectl describe po -l name=myLabel\n" |
| "\n" |
| "\t\t# Describe all pods managed by the 'frontend' replication controller (rc-" |
| "created pods\n" |
| "\t\t# get the name of the rc as a prefix in the pod the name).\n" |
| "\t\tkubectl describe pods frontend" |
| |
| #: pkg/kubectl/cmd/drain.go:165 |
| msgid "" |
| "\n" |
| "\t\t# Drain node \"foo\", even if there are pods not managed by a " |
| "ReplicationController, ReplicaSet, Job, DaemonSet or StatefulSet on it.\n" |
| "\t\t$ kubectl drain foo --force\n" |
| "\n" |
| "\t\t# As above, but abort if there are pods not managed by a " |
| "ReplicationController, ReplicaSet, Job, DaemonSet or StatefulSet, and use a " |
| "grace period of 15 minutes.\n" |
| "\t\t$ kubectl drain foo --grace-period=900" |
| msgstr "" |
| "\n" |
| "\t\t# Drain node \"foo\", even if there are pods not managed by a " |
| "ReplicationController, ReplicaSet, Job, DaemonSet or StatefulSet on it.\n" |
| "\t\t$ kubectl drain foo --force\n" |
| "\n" |
| "\t\t# As above, but abort if there are pods not managed by a " |
| "ReplicationController, ReplicaSet, Job, DaemonSet or StatefulSet, and use a " |
| "grace period of 15 minutes.\n" |
| "\t\t$ kubectl drain foo --grace-period=900" |
| |
| #: pkg/kubectl/cmd/edit.go:80 |
| msgid "" |
| "\n" |
| "\t\t# Edit the service named 'docker-registry':\n" |
| "\t\tkubectl edit svc/docker-registry\n" |
| "\n" |
| "\t\t# Use an alternative editor\n" |
| "\t\tKUBE_EDITOR=\"nano\" kubectl edit svc/docker-registry\n" |
| "\n" |
| "\t\t# Edit the job 'myjob' in JSON using the v1 API format:\n" |
| "\t\tkubectl edit job.v1.batch/myjob -o json\n" |
| "\n" |
| "\t\t# Edit the deployment 'mydeployment' in YAML and save the modified " |
| "config in its annotation:\n" |
| "\t\tkubectl edit deployment/mydeployment -o yaml --save-config" |
| msgstr "" |
| "\n" |
| "\t\t# Edit the service named 'docker-registry':\n" |
| "\t\tkubectl edit svc/docker-registry\n" |
| "\n" |
| "\t\t# Use an alternative editor\n" |
| "\t\tKUBE_EDITOR=\"nano\" kubectl edit svc/docker-registry\n" |
| "\n" |
| "\t\t# Edit the job 'myjob' in JSON using the v1 API format:\n" |
| "\t\tkubectl edit job.v1.batch/myjob -o json\n" |
| "\n" |
| "\t\t# Edit the deployment 'mydeployment' in YAML and save the modified " |
| "config in its annotation:\n" |
| "\t\tkubectl edit deployment/mydeployment -o yaml --save-config" |
| |
| #: pkg/kubectl/cmd/exec.go:41 |
| msgid "" |
| "\n" |
| "\t\t# Get output from running 'date' from pod 123456-7890, using the first " |
| "container by default\n" |
| "\t\tkubectl exec 123456-7890 date\n" |
| "\n" |
| "\t\t# Get output from running 'date' in ruby-container from pod 123456-7890\n" |
| "\t\tkubectl exec 123456-7890 -c ruby-container date\n" |
| "\n" |
| "\t\t# Switch to raw terminal mode, sends stdin to 'bash' in ruby-container " |
| "from pod 123456-7890\n" |
| "\t\t# and sends stdout/stderr from 'bash' back to the client\n" |
| "\t\tkubectl exec 123456-7890 -c ruby-container -i -t -- bash -il" |
| msgstr "" |
| "\n" |
| "\t\t# Get output from running 'date' from pod 123456-7890, using the first " |
| "container by default\n" |
| "\t\tkubectl exec 123456-7890 date\n" |
| "\n" |
| "\t\t# Get output from running 'date' in ruby-container from pod 123456-7890\n" |
| "\t\tkubectl exec 123456-7890 -c ruby-container date\n" |
| "\n" |
| "\t\t# Switch to raw terminal mode, sends stdin to 'bash' in ruby-container " |
| "from pod 123456-7890\n" |
| "\t\t# and sends stdout/stderr from 'bash' back to the client\n" |
| "\t\tkubectl exec 123456-7890 -c ruby-container -i -t -- bash -il" |
| |
| #: pkg/kubectl/cmd/attach.go:42 |
| msgid "" |
| "\n" |
| "\t\t# Get output from running pod 123456-7890, using the first container by " |
| "default\n" |
| "\t\tkubectl attach 123456-7890\n" |
| "\n" |
| "\t\t# Get output from ruby-container from pod 123456-7890\n" |
| "\t\tkubectl attach 123456-7890 -c ruby-container\n" |
| "\n" |
| "\t\t# Switch to raw terminal mode, sends stdin to 'bash' in ruby-container " |
| "from pod 123456-7890\n" |
| "\t\t# and sends stdout/stderr from 'bash' back to the client\n" |
| "\t\tkubectl attach 123456-7890 -c ruby-container -i -t\n" |
| "\n" |
| "\t\t# Get output from the first pod of a ReplicaSet named nginx\n" |
| "\t\tkubectl attach rs/nginx\n" |
| "\t\t" |
| msgstr "" |
| "\n" |
| "\t\t# Get output from running pod 123456-7890, using the first container by " |
| "default\n" |
| "\t\tkubectl attach 123456-7890\n" |
| "\n" |
| "\t\t# Get output from ruby-container from pod 123456-7890\n" |
| "\t\tkubectl attach 123456-7890 -c ruby-container\n" |
| "\n" |
| "\t\t# Switch to raw terminal mode, sends stdin to 'bash' in ruby-container " |
| "from pod 123456-7890\n" |
| "\t\t# and sends stdout/stderr from 'bash' back to the client\n" |
| "\t\tkubectl attach 123456-7890 -c ruby-container -i -t\n" |
| "\n" |
| "\t\t# Get output from the first pod of a ReplicaSet named nginx\n" |
| "\t\tkubectl attach rs/nginx\n" |
| "\t\t" |
| |
| #: pkg/kubectl/cmd/explain.go:39 |
| msgid "" |
| "\n" |
| "\t\t# Get the documentation of the resource and its fields\n" |
| "\t\tkubectl explain pods\n" |
| "\n" |
| "\t\t# Get the documentation of a specific field of a resource\n" |
| "\t\tkubectl explain pods.spec.containers" |
| msgstr "" |
| "\n" |
| "\t\t# Get the documentation of the resource and its fields\n" |
| "\t\tkubectl explain pods\n" |
| "\n" |
| "\t\t# Get the documentation of a specific field of a resource\n" |
| "\t\tkubectl explain pods.spec.containers" |
| |
| #: pkg/kubectl/cmd/completion.go:65 |
| msgid "" |
| "\n" |
| "\t\t# Install bash completion on a Mac using homebrew\n" |
| "\t\tbrew install bash-completion\n" |
| "\t\tprintf \"\n" |
| "# Bash completion support\n" |
| "source $(brew --prefix)/etc/bash_completion\n" |
| "\" >> $HOME/.bash_profile\n" |
| "\t\tsource $HOME/.bash_profile\n" |
| "\n" |
| "\t\t# Load the kubectl completion code for bash into the current shell\n" |
| "\t\tsource <(kubectl completion bash)\n" |
| "\n" |
| "\t\t# Write bash completion code to a file and source if from .bash_profile\n" |
| "\t\tkubectl completion bash > ~/.kube/completion.bash.inc\n" |
| "\t\tprintf \"\n" |
| "# Kubectl shell completion\n" |
| "source '$HOME/.kube/completion.bash.inc'\n" |
| "\" >> $HOME/.bash_profile\n" |
| "\t\tsource $HOME/.bash_profile\n" |
| "\n" |
| "\t\t# Load the kubectl completion code for zsh[1] into the current shell\n" |
| "\t\tsource <(kubectl completion zsh)" |
| msgstr "" |
| "\n" |
| "\t\t# Install bash completion on a Mac using homebrew\n" |
| "\t\tbrew install bash-completion\n" |
| "\t\tprintf \"\n" |
| "# Bash completion support\n" |
| "source $(brew --prefix)/etc/bash_completion\n" |
| "\" >> $HOME/.bash_profile\n" |
| "\t\tsource $HOME/.bash_profile\n" |
| "\n" |
| "\t\t# Load the kubectl completion code for bash into the current shell\n" |
| "\t\tsource <(kubectl completion bash)\n" |
| "\n" |
| "\t\t# Write bash completion code to a file and source if from .bash_profile\n" |
| "\t\tkubectl completion bash > ~/.kube/completion.bash.inc\n" |
| "\t\tprintf \"\n" |
| "# Kubectl shell completion\n" |
| "source '$HOME/.kube/completion.bash.inc'\n" |
| "\" >> $HOME/.bash_profile\n" |
| "\t\tsource $HOME/.bash_profile\n" |
| "\n" |
| "\t\t# Load the kubectl completion code for zsh[1] into the current shell\n" |
| "\t\tsource <(kubectl completion zsh)" |
| |
| #: pkg/kubectl/cmd/get.go:64 |
| msgid "" |
| "\n" |
| "\t\t# List all pods in ps output format.\n" |
| "\t\tkubectl get pods\n" |
| "\n" |
| "\t\t# List all pods in ps output format with more information (such as node " |
| "name).\n" |
| "\t\tkubectl get pods -o wide\n" |
| "\n" |
| "\t\t# List a single replication controller with specified NAME in ps output " |
| "format.\n" |
| "\t\tkubectl get replicationcontroller web\n" |
| "\n" |
| "\t\t# List a single pod in JSON output format.\n" |
| "\t\tkubectl get -o json pod web-pod-13je7\n" |
| "\n" |
| "\t\t# List a pod identified by type and name specified in \"pod.yaml\" in " |
| "JSON output format.\n" |
| "\t\tkubectl get -f pod.yaml -o json\n" |
| "\n" |
| "\t\t# Return only the phase value of the specified pod.\n" |
| "\t\tkubectl get -o template pod/web-pod-13je7 --template={{.status.phase}}\n" |
| "\n" |
| "\t\t# List all replication controllers and services together in ps output " |
| "format.\n" |
| "\t\tkubectl get rc,services\n" |
| "\n" |
| "\t\t# List one or more resources by their type and names.\n" |
| "\t\tkubectl get rc/web service/frontend pods/web-pod-13je7\n" |
| "\n" |
| "\t\t# List all resources with different types.\n" |
| "\t\tkubectl get all" |
| msgstr "" |
| "\n" |
| "\t\t# List all pods in ps output format.\n" |
| "\t\tkubectl get pods\n" |
| "\n" |
| "\t\t# List all pods in ps output format with more information (such as node " |
| "name).\n" |
| "\t\tkubectl get pods -o wide\n" |
| "\n" |
| "\t\t# List a single replication controller with specified NAME in ps output " |
| "format.\n" |
| "\t\tkubectl get replicationcontroller web\n" |
| "\n" |
| "\t\t# List a single pod in JSON output format.\n" |
| "\t\tkubectl get -o json pod web-pod-13je7\n" |
| "\n" |
| "\t\t# List a pod identified by type and name specified in \"pod.yaml\" in " |
| "JSON output format.\n" |
| "\t\tkubectl get -f pod.yaml -o json\n" |
| "\n" |
| "\t\t# Return only the phase value of the specified pod.\n" |
| "\t\tkubectl get -o template pod/web-pod-13je7 --template={{.status.phase}}\n" |
| "\n" |
| "\t\t# List all replication controllers and services together in ps output " |
| "format.\n" |
| "\t\tkubectl get rc,services\n" |
| "\n" |
| "\t\t# List one or more resources by their type and names.\n" |
| "\t\tkubectl get rc/web service/frontend pods/web-pod-13je7\n" |
| "\n" |
| "\t\t# List all resources with different types.\n" |
| "\t\tkubectl get all" |
| |
| #: pkg/kubectl/cmd/portforward.go:53 |
| msgid "" |
| "\n" |
| "\t\t# Listen on ports 5000 and 6000 locally, forwarding data to/from ports 5000 and 6000 in the pod" |
| "\t\tkubectl port-forward pod/mypod 5000 6000" |
| "\n" |
| "\t\t# Listen on ports 5000 and 6000 locally, forwarding data to/from ports 5000 and 6000 in a pod selected by the deployment" |
| "\t\tkubectl port-forward deployment/mydeployment 5000 6000" |
| "\n" |
| "\t\t# Listen on ports 5000 and 6000 locally, forwarding data to/from ports 5000 and 6000 in a pod selected by the service" |
| "\t\tkubectl port-forward service/myservice 5000 6000" |
| "\n" |
| "\t\t# Listen on port 8888 locally, forwarding to 5000 in the pod" |
| "\t\tkubectl port-forward pod/mypod 8888:5000" |
| "\n" |
| "\t\t# Listen on a random port locally, forwarding to 5000 in the pod" |
| "\t\tkubectl port-forward pod/mypod :5000" |
| msgstr "" |
| "\n" |
| "\t\t# Listen on ports 5000 and 6000 locally, forwarding data to/from ports 5000 and 6000 in the pod" |
| "\t\tkubectl port-forward pod/mypod 5000 6000" |
| "\n" |
| "\t\t# Listen on ports 5000 and 6000 locally, forwarding data to/from ports 5000 and 6000 in a pod selected by the deployment" |
| "\t\tkubectl port-forward deployment/mydeployment 5000 6000" |
| "\n" |
| "\t\t# Listen on ports 5000 and 6000 locally, forwarding data to/from ports 5000 and 6000 in a pod selected by the service" |
| "\t\tkubectl port-forward service/myservice 5000 6000" |
| "\n" |
| "\t\t# Listen on port 8888 locally, forwarding to 5000 in the pod" |
| "\t\tkubectl port-forward pod/mypod 8888:5000" |
| "\n" |
| "\t\t# Listen on a random port locally, forwarding to 5000 in the pod" |
| "\t\tkubectl port-forward pod/mypod :5000" |
| |
| #: pkg/kubectl/cmd/drain.go:118 |
| msgid "" |
| "\n" |
| "\t\t# Mark node \"foo\" as schedulable.\n" |
| "\t\t$ kubectl uncordon foo" |
| msgstr "" |
| "\n" |
| "\t\t# Mark node \"foo\" as schedulable.\n" |
| "\t\t$ kubectl uncordon foo" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/drain.go#L102 |
| #: pkg/kubectl/cmd/drain.go:93 |
| msgid "" |
| "\n" |
| "\t\t# Mark node \"foo\" as unschedulable.\n" |
| "\t\tkubectl cordon foo" |
| msgstr "" |
| "\n" |
| "\t\t# Mark node \"foo\" as unschedulable.\n" |
| "\t\tkubectl cordon foo" |
| |
| #: pkg/kubectl/cmd/patch.go:66 |
| msgid "" |
| "\n" |
| "\t\t# Partially update a node using strategic merge patch\n" |
| "\t\tkubectl patch node k8s-node-1 -p '{\"spec\":{\"unschedulable\":true}}'\n" |
| "\n" |
| "\t\t# Partially update a node identified by the type and name specified in " |
| "\"node.json\" using strategic merge patch\n" |
| "\t\tkubectl patch -f node.json -p '{\"spec\":{\"unschedulable\":true}}'\n" |
| "\n" |
| "\t\t# Update a container's image; spec.containers[*].name is required " |
| "because it's a merge key\n" |
| "\t\tkubectl patch pod valid-pod -p '{\"spec\":{\"containers\":[{\"name\":" |
| "\"kubernetes-serve-hostname\",\"image\":\"new image\"}]}}'\n" |
| "\n" |
| "\t\t# Update a container's image using a json patch with positional arrays\n" |
| "\t\tkubectl patch pod valid-pod --type='json' -p='[{\"op\": \"replace\", " |
| "\"path\": \"/spec/containers/0/image\", \"value\":\"new image\"}]'" |
| msgstr "" |
| "\n" |
| "\t\t# Partially update a node using strategic merge patch\n" |
| "\t\tkubectl patch node k8s-node-1 -p '{\"spec\":{\"unschedulable\":true}}'\n" |
| "\n" |
| "\t\t# Partially update a node identified by the type and name specified in " |
| "\"node.json\" using strategic merge patch\n" |
| "\t\tkubectl patch -f node.json -p '{\"spec\":{\"unschedulable\":true}}'\n" |
| "\n" |
| "\t\t# Update a container's image; spec.containers[*].name is required " |
| "because it's a merge key\n" |
| "\t\tkubectl patch pod valid-pod -p '{\"spec\":{\"containers\":[{\"name\":" |
| "\"kubernetes-serve-hostname\",\"image\":\"new image\"}]}}'\n" |
| "\n" |
| "\t\t# Update a container's image using a json patch with positional arrays\n" |
| "\t\tkubectl patch pod valid-pod --type='json' -p='[{\"op\": \"replace\", " |
| "\"path\": \"/spec/containers/0/image\", \"value\":\"new image\"}]'" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/options.go#L37 |
| #: pkg/kubectl/cmd/options.go:29 |
| msgid "" |
| "\n" |
| "\t\t# Print flags inherited by all commands\n" |
| "\t\tkubectl options" |
| msgstr "" |
| "\n" |
| "\t\t# Print flags inherited by all commands\n" |
| "\t\tkubectl options" |
| |
| #: pkg/kubectl/cmd/clusterinfo.go:41 |
| msgid "" |
| "\n" |
| "\t\t# Print the address of the master and cluster services\n" |
| "\t\tkubectl cluster-info" |
| msgstr "" |
| "\n" |
| "\t\t# Print the address of the master and cluster services\n" |
| "\t\tkubectl cluster-info" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/version.go#L39 |
| #: pkg/kubectl/cmd/version.go:32 |
| msgid "" |
| "\n" |
| "\t\t# Print the client and server versions for the current context\n" |
| "\t\tkubectl version" |
| msgstr "" |
| "\n" |
| "\t\t# Print the client and server versions for the current context\n" |
| "\t\tkubectl version" |
| |
| #: pkg/kubectl/cmd/apiversions.go:34 |
| msgid "" |
| "\n" |
| "\t\t# Print the supported API versions\n" |
| "\t\tkubectl api-versions" |
| msgstr "" |
| "\n" |
| "\t\t# Print the supported API versions\n" |
| "\t\tkubectl api-versions" |
| |
| #: pkg/kubectl/cmd/replace.go:50 |
| msgid "" |
| "\n" |
| "\t\t# Replace a pod using the data in pod.json.\n" |
| "\t\tkubectl replace -f ./pod.json\n" |
| "\n" |
| "\t\t# Replace a pod based on the JSON passed into stdin.\n" |
| "\t\tcat pod.json | kubectl replace -f -\n" |
| "\n" |
| "\t\t# Update a single-container pod's image version (tag) to v4\n" |
| "\t\tkubectl get pod mypod -o yaml | sed 's/\\(image: myimage\\):.*$/:v4/' | " |
| "kubectl replace -f -\n" |
| "\n" |
| "\t\t# Force replace, delete and then re-create the resource\n" |
| "\t\tkubectl replace --force -f ./pod.json" |
| msgstr "" |
| "\n" |
| "\t\t# Replace a pod using the data in pod.json.\n" |
| "\t\tkubectl replace -f ./pod.json\n" |
| "\n" |
| "\t\t# Replace a pod based on the JSON passed into stdin.\n" |
| "\t\tcat pod.json | kubectl replace -f -\n" |
| "\n" |
| "\t\t# Update a single-container pod's image version (tag) to v4\n" |
| "\t\tkubectl get pod mypod -o yaml | sed 's/\\(image: myimage\\):.*$/:v4/' | " |
| "kubectl replace -f -\n" |
| "\n" |
| "\t\t# Force replace, delete and then re-create the resource\n" |
| "\t\tkubectl replace --force -f ./pod.json" |
| |
| #: pkg/kubectl/cmd/logs.go:40 |
| msgid "" |
| "\n" |
| "\t\t# Return snapshot logs from pod nginx with only one container\n" |
| "\t\tkubectl logs nginx\n" |
| "\n" |
| "\t\t# Return snapshot logs for the pods defined by label app=nginx\n" |
| "\t\tkubectl logs -lapp=nginx\n" |
| "\n" |
| "\t\t# Return snapshot of previous terminated ruby container logs from pod " |
| "web-1\n" |
| "\t\tkubectl logs -p -c ruby web-1\n" |
| "\n" |
| "\t\t# Begin streaming the logs of the ruby container in pod web-1\n" |
| "\t\tkubectl logs -f -c ruby web-1\n" |
| "\n" |
| "\t\t# Display only the most recent 20 lines of output in pod nginx\n" |
| "\t\tkubectl logs --tail=20 nginx\n" |
| "\n" |
| "\t\t# Show all logs from pod nginx written in the last hour\n" |
| "\t\tkubectl logs --since=1h nginx\n" |
| "\n" |
| "\t\t# Return snapshot logs from first container of a job named hello\n" |
| "\t\tkubectl logs job/hello\n" |
| "\n" |
| "\t\t# Return snapshot logs from container nginx-1 of a deployment named " |
| "nginx\n" |
| "\t\tkubectl logs deployment/nginx -c nginx-1" |
| msgstr "" |
| "\n" |
| "\t\t# Return snapshot logs from pod nginx with only one container\n" |
| "\t\tkubectl logs nginx\n" |
| "\n" |
| "\t\t# Return snapshot logs for the pods defined by label app=nginx\n" |
| "\t\tkubectl logs -lapp=nginx\n" |
| "\n" |
| "\t\t# Return snapshot of previous terminated ruby container logs from pod " |
| "web-1\n" |
| "\t\tkubectl logs -p -c ruby web-1\n" |
| "\n" |
| "\t\t# Begin streaming the logs of the ruby container in pod web-1\n" |
| "\t\tkubectl logs -f -c ruby web-1\n" |
| "\n" |
| "\t\t# Display only the most recent 20 lines of output in pod nginx\n" |
| "\t\tkubectl logs --tail=20 nginx\n" |
| "\n" |
| "\t\t# Show all logs from pod nginx written in the last hour\n" |
| "\t\tkubectl logs --since=1h nginx\n" |
| "\n" |
| "\t\t# Return snapshot logs from first container of a job named hello\n" |
| "\t\tkubectl logs job/hello\n" |
| "\n" |
| "\t\t# Return snapshot logs from container nginx-1 of a deployment named " |
| "nginx\n" |
| "\t\tkubectl logs deployment/nginx -c nginx-1" |
| |
| #: pkg/kubectl/cmd/proxy.go:53 |
| msgid "" |
| "\n" |
| "\t\t# Run a proxy to kubernetes apiserver on port 8011, serving static " |
| "content from ./local/www/\n" |
| "\t\tkubectl proxy --port=8011 --www=./local/www/\n" |
| "\n" |
| "\t\t# Run a proxy to kubernetes apiserver on an arbitrary local port.\n" |
| "\t\t# The chosen port for the server will be output to stdout.\n" |
| "\t\tkubectl proxy --port=0\n" |
| "\n" |
| "\t\t# Run a proxy to kubernetes apiserver, changing the api prefix to k8s-" |
| "api\n" |
| "\t\t# This makes e.g. the pods api available at localhost:8001/k8s-api/v1/" |
| "pods/\n" |
| "\t\tkubectl proxy --api-prefix=/k8s-api" |
| msgstr "" |
| "\n" |
| "\t\t# Run a proxy to kubernetes apiserver on port 8011, serving static " |
| "content from ./local/www/\n" |
| "\t\tkubectl proxy --port=8011 --www=./local/www/\n" |
| "\n" |
| "\t\t# Run a proxy to kubernetes apiserver on an arbitrary local port.\n" |
| "\t\t# The chosen port for the server will be output to stdout.\n" |
| "\t\tkubectl proxy --port=0\n" |
| "\n" |
| "\t\t# Run a proxy to kubernetes apiserver, changing the api prefix to k8s-" |
| "api\n" |
| "\t\t# This makes e.g. the pods api available at localhost:8001/k8s-api/v1/" |
| "pods/\n" |
| "\t\tkubectl proxy --api-prefix=/k8s-api" |
| |
| #: pkg/kubectl/cmd/scale.go:43 |
| msgid "" |
| "\n" |
| "\t\t# Scale a replicaset named 'foo' to 3.\n" |
| "\t\tkubectl scale --replicas=3 rs/foo\n" |
| "\n" |
| "\t\t# Scale a resource identified by type and name specified in \"foo.yaml\" " |
| "to 3.\n" |
| "\t\tkubectl scale --replicas=3 -f foo.yaml\n" |
| "\n" |
| "\t\t# If the deployment named mysql's current size is 2, scale mysql to 3.\n" |
| "\t\tkubectl scale --current-replicas=2 --replicas=3 deployment/mysql\n" |
| "\n" |
| "\t\t# Scale multiple replication controllers.\n" |
| "\t\tkubectl scale --replicas=5 rc/foo rc/bar rc/baz\n" |
| "\n" |
| "\t\t# Scale job named 'cron' to 3.\n" |
| "\t\tkubectl scale --replicas=3 job/cron" |
| msgstr "" |
| "\n" |
| "\t\t# Scale a replicaset named 'foo' to 3.\n" |
| "\t\tkubectl scale --replicas=3 rs/foo\n" |
| "\n" |
| "\t\t# Scale a resource identified by type and name specified in \"foo.yaml\" " |
| "to 3.\n" |
| "\t\tkubectl scale --replicas=3 -f foo.yaml\n" |
| "\n" |
| "\t\t# If the deployment named mysql's current size is 2, scale mysql to 3.\n" |
| "\t\tkubectl scale --current-replicas=2 --replicas=3 deployment/mysql\n" |
| "\n" |
| "\t\t# Scale multiple replication controllers.\n" |
| "\t\tkubectl scale --replicas=5 rc/foo rc/bar rc/baz\n" |
| "\n" |
| "\t\t# Scale job named 'cron' to 3.\n" |
| "\t\tkubectl scale --replicas=3 job/cron" |
| |
| #: pkg/kubectl/cmd/apply_set_last_applied.go:67 |
| msgid "" |
| "\n" |
| "\t\t# Set the last-applied-configuration of a resource to match the contents " |
| "of a file.\n" |
| "\t\tkubectl apply set-last-applied -f deploy.yaml\n" |
| "\n" |
| "\t\t# Execute set-last-applied against each configuration file in a " |
| "directory.\n" |
| "\t\tkubectl apply set-last-applied -f path/\n" |
| "\n" |
| "\t\t# Set the last-applied-configuration of a resource to match the contents " |
| "of a file, will create the annotation if it does not already exist.\n" |
| "\t\tkubectl apply set-last-applied -f deploy.yaml --create-annotation=true\n" |
| "\t\t" |
| msgstr "" |
| "\n" |
| "\t\t# Set the last-applied-configuration of a resource to match the contents " |
| "of a file.\n" |
| "\t\tkubectl apply set-last-applied -f deploy.yaml\n" |
| "\n" |
| "\t\t# Execute set-last-applied against each configuration file in a " |
| "directory.\n" |
| "\t\tkubectl apply set-last-applied -f path/\n" |
| "\n" |
| "\t\t# Set the last-applied-configuration of a resource to match the contents " |
| "of a file, will create the annotation if it does not already exist.\n" |
| "\t\tkubectl apply set-last-applied -f deploy.yaml --create-annotation=true\n" |
| "\t\t" |
| |
| #: pkg/kubectl/cmd/top_pod.go:61 |
| msgid "" |
| "\n" |
| "\t\t# Show metrics for all pods in the default namespace\n" |
| "\t\tkubectl top pod\n" |
| "\n" |
| "\t\t# Show metrics for all pods in the given namespace\n" |
| "\t\tkubectl top pod --namespace=NAMESPACE\n" |
| "\n" |
| "\t\t# Show metrics for a given pod and its containers\n" |
| "\t\tkubectl top pod POD_NAME --containers\n" |
| "\n" |
| "\t\t# Show metrics for the pods defined by label name=myLabel\n" |
| "\t\tkubectl top pod -l name=myLabel" |
| msgstr "" |
| "\n" |
| "\t\t# Show metrics for all pods in the default namespace\n" |
| "\t\tkubectl top pod\n" |
| "\n" |
| "\t\t# Show metrics for all pods in the given namespace\n" |
| "\t\tkubectl top pod --namespace=NAMESPACE\n" |
| "\n" |
| "\t\t# Show metrics for a given pod and its containers\n" |
| "\t\tkubectl top pod POD_NAME --containers\n" |
| "\n" |
| "\t\t# Show metrics for the pods defined by label name=myLabel\n" |
| "\t\tkubectl top pod -l name=myLabel" |
| |
| #: pkg/kubectl/cmd/stop.go:40 |
| msgid "" |
| "\n" |
| "\t\t# Shut down foo.\n" |
| "\t\tkubectl stop replicationcontroller foo\n" |
| "\n" |
| "\t\t# Stop pods and services with label name=myLabel.\n" |
| "\t\tkubectl stop pods,services -l name=myLabel\n" |
| "\n" |
| "\t\t# Shut down the service defined in service.json\n" |
| "\t\tkubectl stop -f service.json\n" |
| "\n" |
| "\t\t# Shut down all resources in the path/to/resources directory\n" |
| "\t\tkubectl stop -f path/to/resources" |
| msgstr "" |
| "\n" |
| "\t\t# Shut down foo.\n" |
| "\t\tkubectl stop replicationcontroller foo\n" |
| "\n" |
| "\t\t# Stop pods and services with label name=myLabel.\n" |
| "\t\tkubectl stop pods,services -l name=myLabel\n" |
| "\n" |
| "\t\t# Shut down the service defined in service.json\n" |
| "\t\tkubectl stop -f service.json\n" |
| "\n" |
| "\t\t# Shut down all resources in the path/to/resources directory\n" |
| "\t\tkubectl stop -f path/to/resources" |
| |
| #: pkg/kubectl/cmd/run.go:57 |
| msgid "" |
| "\n" |
| "\t\t# Start a single instance of nginx.\n" |
| "\t\tkubectl run nginx --image=nginx\n" |
| "\n" |
| "\t\t# Start a single instance of hazelcast and let the container expose port " |
| "5701 .\n" |
| "\t\tkubectl run hazelcast --image=hazelcast --port=5701\n" |
| "\n" |
| "\t\t# Start a single instance of hazelcast and set environment variables " |
| "\"DNS_DOMAIN=cluster\" and \"POD_NAMESPACE=default\" in the container.\n" |
| "\t\tkubectl run hazelcast --image=hazelcast --env=\"DNS_DOMAIN=cluster\" --" |
| "env=\"POD_NAMESPACE=default\"\n" |
| "\n" |
| "\t\t# Start a replicated instance of nginx.\n" |
| "\t\tkubectl run nginx --image=nginx --replicas=5\n" |
| "\n" |
| "\t\t# Dry run. Print the corresponding API objects without creating them.\n" |
| "\t\tkubectl run nginx --image=nginx --dry-run\n" |
| "\n" |
| "\t\t# Start a single instance of nginx, but overload the spec of the " |
| "deployment with a partial set of values parsed from JSON.\n" |
| "\t\tkubectl run nginx --image=nginx --overrides='{ \"apiVersion\": \"v1\", " |
| "\"spec\": { ... } }'\n" |
| "\n" |
| "\t\t# Start a pod of busybox and keep it in the foreground, don't restart it " |
| "if it exits.\n" |
| "\t\tkubectl run -i -t busybox --image=busybox --restart=Never\n" |
| "\n" |
| "\t\t# Start the nginx container using the default command, but use custom " |
| "arguments (arg1 .. argN) for that command.\n" |
| "\t\tkubectl run nginx --image=nginx -- <arg1> <arg2> ... <argN>\n" |
| "\n" |
| "\t\t# Start the nginx container using a different command and custom " |
| "arguments.\n" |
| "\t\tkubectl run nginx --image=nginx --command -- <cmd> <arg1> ... <argN>\n" |
| "\n" |
| "\t\t# Start the perl container to compute π to 2000 places and print it " |
| "out.\n" |
| "\t\tkubectl run pi --image=perl --restart=OnFailure -- perl -Mbignum=bpi -" |
| "wle 'print bpi(2000)'\n" |
| "\n" |
| "\t\t# Start the cron job to compute π to 2000 places and print it out every " |
| "5 minutes.\n" |
| "\t\tkubectl run pi --schedule=\"0/5 * * * ?\" --image=perl --" |
| "restart=OnFailure -- perl -Mbignum=bpi -wle 'print bpi(2000)'" |
| msgstr "" |
| "\n" |
| "\t\t# Start a single instance of nginx.\n" |
| "\t\tkubectl run nginx --image=nginx\n" |
| "\n" |
| "\t\t# Start a single instance of hazelcast and let the container expose port " |
| "5701 .\n" |
| "\t\tkubectl run hazelcast --image=hazelcast --port=5701\n" |
| "\n" |
| "\t\t# Start a single instance of hazelcast and set environment variables " |
| "\"DNS_DOMAIN=cluster\" and \"POD_NAMESPACE=default\" in the container.\n" |
| "\t\tkubectl run hazelcast --image=hazelcast --env=\"DNS_DOMAIN=cluster\" --" |
| "env=\"POD_NAMESPACE=default\"\n" |
| "\n" |
| "\t\t# Start a replicated instance of nginx.\n" |
| "\t\tkubectl run nginx --image=nginx --replicas=5\n" |
| "\n" |
| "\t\t# Dry run. Print the corresponding API objects without creating them.\n" |
| "\t\tkubectl run nginx --image=nginx --dry-run\n" |
| "\n" |
| "\t\t# Start a single instance of nginx, but overload the spec of the " |
| "deployment with a partial set of values parsed from JSON.\n" |
| "\t\tkubectl run nginx --image=nginx --overrides='{ \"apiVersion\": \"v1\", " |
| "\"spec\": { ... } }'\n" |
| "\n" |
| "\t\t# Start a pod of busybox and keep it in the foreground, don't restart it " |
| "if it exits.\n" |
| "\t\tkubectl run -i -t busybox --image=busybox --restart=Never\n" |
| "\n" |
| "\t\t# Start the nginx container using the default command, but use custom " |
| "arguments (arg1 .. argN) for that command.\n" |
| "\t\tkubectl run nginx --image=nginx -- <arg1> <arg2> ... <argN>\n" |
| "\n" |
| "\t\t# Start the nginx container using a different command and custom " |
| "arguments.\n" |
| "\t\tkubectl run nginx --image=nginx --command -- <cmd> <arg1> ... <argN>\n" |
| "\n" |
| "\t\t# Start the perl container to compute π to 2000 places and print it " |
| "out.\n" |
| "\t\tkubectl run pi --image=perl --restart=OnFailure -- perl -Mbignum=bpi -" |
| "wle 'print bpi(2000)'\n" |
| "\n" |
| "\t\t# Start the cron job to compute π to 2000 places and print it out every " |
| "5 minutes.\n" |
| "\t\tkubectl run pi --schedule=\"0/5 * * * ?\" --image=perl --" |
| "restart=OnFailure -- perl -Mbignum=bpi -wle 'print bpi(2000)'" |
| |
| #: pkg/kubectl/cmd/taint.go:67 |
| msgid "" |
| "\n" |
| "\t\t# Update node 'foo' with a taint with key 'dedicated' and value 'special-" |
| "user' and effect 'NoSchedule'.\n" |
| "\t\t# If a taint with that key and effect already exists, its value is " |
| "replaced as specified.\n" |
| "\t\tkubectl taint nodes foo dedicated=special-user:NoSchedule\n" |
| "\n" |
| "\t\t# Remove from node 'foo' the taint with key 'dedicated' and effect " |
| "'NoSchedule' if one exists.\n" |
| "\t\tkubectl taint nodes foo dedicated:NoSchedule-\n" |
| "\n" |
| "\t\t# Remove from node 'foo' all the taints with key 'dedicated'\n" |
| "\t\tkubectl taint nodes foo dedicated-" |
| msgstr "" |
| "\n" |
| "\t\t# Update node 'foo' with a taint with key 'dedicated' and value 'special-" |
| "user' and effect 'NoSchedule'.\n" |
| "\t\t# If a taint with that key and effect already exists, its value is " |
| "replaced as specified.\n" |
| "\t\tkubectl taint nodes foo dedicated=special-user:NoSchedule\n" |
| "\n" |
| "\t\t# Remove from node 'foo' the taint with key 'dedicated' and effect " |
| "'NoSchedule' if one exists.\n" |
| "\t\tkubectl taint nodes foo dedicated:NoSchedule-\n" |
| "\n" |
| "\t\t# Remove from node 'foo' all the taints with key 'dedicated'\n" |
| "\t\tkubectl taint nodes foo dedicated-" |
| |
| #: pkg/kubectl/cmd/label.go:77 |
| msgid "" |
| "\n" |
| "\t\t# Update pod 'foo' with the label 'unhealthy' and the value 'true'.\n" |
| "\t\tkubectl label pods foo unhealthy=true\n" |
| "\n" |
| "\t\t# Update pod 'foo' with the label 'status' and the value 'unhealthy', " |
| "overwriting any existing value.\n" |
| "\t\tkubectl label --overwrite pods foo status=unhealthy\n" |
| "\n" |
| "\t\t# Update all pods in the namespace\n" |
| "\t\tkubectl label pods --all status=unhealthy\n" |
| "\n" |
| "\t\t# Update a pod identified by the type and name in \"pod.json\"\n" |
| "\t\tkubectl label -f pod.json status=unhealthy\n" |
| "\n" |
| "\t\t# Update pod 'foo' only if the resource is unchanged from version 1.\n" |
| "\t\tkubectl label pods foo status=unhealthy --resource-version=1\n" |
| "\n" |
| "\t\t# Update pod 'foo' by removing a label named 'bar' if it exists.\n" |
| "\t\t# Does not require the --overwrite flag.\n" |
| "\t\tkubectl label pods foo bar-" |
| msgstr "" |
| "\n" |
| "\t\t# Update pod 'foo' with the label 'unhealthy' and the value 'true'.\n" |
| "\t\tkubectl label pods foo unhealthy=true\n" |
| "\n" |
| "\t\t# Update pod 'foo' with the label 'status' and the value 'unhealthy', " |
| "overwriting any existing value.\n" |
| "\t\tkubectl label --overwrite pods foo status=unhealthy\n" |
| "\n" |
| "\t\t# Update all pods in the namespace\n" |
| "\t\tkubectl label pods --all status=unhealthy\n" |
| "\n" |
| "\t\t# Update a pod identified by the type and name in \"pod.json\"\n" |
| "\t\tkubectl label -f pod.json status=unhealthy\n" |
| "\n" |
| "\t\t# Update pod 'foo' only if the resource is unchanged from version 1.\n" |
| "\t\tkubectl label pods foo status=unhealthy --resource-version=1\n" |
| "\n" |
| "\t\t# Update pod 'foo' by removing a label named 'bar' if it exists.\n" |
| "\t\t# Does not require the --overwrite flag.\n" |
| "\t\tkubectl label pods foo bar-" |
| |
| #: pkg/kubectl/cmd/rollingupdate.go:54 |
| msgid "" |
| "\n" |
| "\t\t# Update pods of frontend-v1 using new replication controller data in " |
| "frontend-v2.json.\n" |
| "\t\tkubectl rolling-update frontend-v1 -f frontend-v2.json\n" |
| "\n" |
| "\t\t# Update pods of frontend-v1 using JSON data passed into stdin.\n" |
| "\t\tcat frontend-v2.json | kubectl rolling-update frontend-v1 -f -\n" |
| "\n" |
| "\t\t# Update the pods of frontend-v1 to frontend-v2 by just changing the " |
| "image, and switching the\n" |
| "\t\t# name of the replication controller.\n" |
| "\t\tkubectl rolling-update frontend-v1 frontend-v2 --image=image:v2\n" |
| "\n" |
| "\t\t# Update the pods of frontend by just changing the image, and keeping " |
| "the old name.\n" |
| "\t\tkubectl rolling-update frontend --image=image:v2\n" |
| "\n" |
| "\t\t# Abort and reverse an existing rollout in progress (from frontend-v1 to " |
| "frontend-v2).\n" |
| "\t\tkubectl rolling-update frontend-v1 frontend-v2 --rollback" |
| msgstr "" |
| "\n" |
| "\t\t# Update pods of frontend-v1 using new replication controller data in " |
| "frontend-v2.json.\n" |
| "\t\tkubectl rolling-update frontend-v1 -f frontend-v2.json\n" |
| "\n" |
| "\t\t# Update pods of frontend-v1 using JSON data passed into stdin.\n" |
| "\t\tcat frontend-v2.json | kubectl rolling-update frontend-v1 -f -\n" |
| "\n" |
| "\t\t# Update the pods of frontend-v1 to frontend-v2 by just changing the " |
| "image, and switching the\n" |
| "\t\t# name of the replication controller.\n" |
| "\t\tkubectl rolling-update frontend-v1 frontend-v2 --image=image:v2\n" |
| "\n" |
| "\t\t# Update the pods of frontend by just changing the image, and keeping " |
| "the old name.\n" |
| "\t\tkubectl rolling-update frontend --image=image:v2\n" |
| "\n" |
| "\t\t# Abort and reverse an existing rollout in progress (from frontend-v1 to " |
| "frontend-v2).\n" |
| "\t\tkubectl rolling-update frontend-v1 frontend-v2 --rollback" |
| |
| #: pkg/kubectl/cmd/apply_view_last_applied.go:52 |
| msgid "" |
| "\n" |
| "\t\t# View the last-applied-configuration annotations by type/name in YAML.\n" |
| "\t\tkubectl apply view-last-applied deployment/nginx\n" |
| "\n" |
| "\t\t# View the last-applied-configuration annotations by file in JSON\n" |
| "\t\tkubectl apply view-last-applied -f deploy.yaml -o json" |
| msgstr "" |
| "\n" |
| "\t\t# View the last-applied-configuration annotations by type/name in YAML.\n" |
| "\t\tkubectl apply view-last-applied deployment/nginx\n" |
| "\n" |
| "\t\t# View the last-applied-configuration annotations by file in JSON\n" |
| "\t\tkubectl apply view-last-applied -f deploy.yaml -o json" |
| |
| #: pkg/kubectl/cmd/apply.go:75 |
| msgid "" |
| "\n" |
| "\t\tApply a configuration to a resource by filename or stdin.\n" |
| "\t\tThis resource will be created if it doesn't exist yet.\n" |
| "\t\tTo use 'apply', always create the resource initially with either 'apply' " |
| "or 'create --save-config'.\n" |
| "\n" |
| "\t\tJSON and YAML formats are accepted.\n" |
| "\n" |
| "\t\tAlpha Disclaimer: the --prune functionality is not yet complete. Do not " |
| "use unless you are aware of what the current state is. See https://issues." |
| "k8s.io/34274." |
| msgstr "" |
| "\n" |
| "\t\tApply a configuration to a resource by filename or stdin.\n" |
| "\t\tThis resource will be created if it doesn't exist yet.\n" |
| "\t\tTo use 'apply', always create the resource initially with either 'apply' " |
| "or 'create --save-config'.\n" |
| "\n" |
| "\t\tJSON and YAML formats are accepted.\n" |
| "\n" |
| "\t\tAlpha Disclaimer: the --prune functionality is not yet complete. Do not " |
| "use unless you are aware of what the current state is. See https://issues." |
| "k8s.io/34274." |
| |
| #: pkg/kubectl/cmd/convert.go:38 |
| msgid "" |
| "\n" |
| "\t\tConvert config files between different API versions. Both YAML\n" |
| "\t\tand JSON formats are accepted.\n" |
| "\n" |
| "\t\tThe command takes filename, directory, or URL as input, and convert it " |
| "into format\n" |
| "\t\tof version specified by --output-version flag. If target version is not " |
| "specified or\n" |
| "\t\tnot supported, convert to latest version.\n" |
| "\n" |
| "\t\tThe default output will be printed to stdout in YAML format. One can use " |
| "-o option\n" |
| "\t\tto change to output destination." |
| msgstr "" |
| "\n" |
| "\t\tConvert config files between different API versions. Both YAML\n" |
| "\t\tand JSON formats are accepted.\n" |
| "\n" |
| "\t\tThe command takes filename, directory, or URL as input, and convert it " |
| "into format\n" |
| "\t\tof version specified by --output-version flag. If target version is not " |
| "specified or\n" |
| "\t\tnot supported, convert to latest version.\n" |
| "\n" |
| "\t\tThe default output will be printed to stdout in YAML format. One can use " |
| "-o option\n" |
| "\t\tto change to output destination." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_service.go#L68 |
| #: pkg/kubectl/cmd/create_clusterrole.go:31 |
| msgid "" |
| "\n" |
| "\t\tCreate a ClusterRole." |
| msgstr "" |
| "\n" |
| "\t\tCreate a ClusterRole." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_clusterrolebinding.go#L43 |
| #: pkg/kubectl/cmd/create_clusterrolebinding.go:32 |
| msgid "" |
| "\n" |
| "\t\tCreate a ClusterRoleBinding for a particular ClusterRole." |
| msgstr "" |
| "\n" |
| "\t\tCreate a ClusterRoleBinding for a particular ClusterRole." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_rolebinding.go#L43 |
| #: pkg/kubectl/cmd/create_rolebinding.go:32 |
| msgid "" |
| "\n" |
| "\t\tCreate a RoleBinding for a particular Role or ClusterRole." |
| msgstr "" |
| "\n" |
| "\t\tCreate a RoleBinding for a particular Role or ClusterRole." |
| |
| #: pkg/kubectl/cmd/create_secret.go:200 |
| msgid "" |
| "\n" |
| "\t\tCreate a TLS secret from the given public/private key pair.\n" |
| "\n" |
| "\t\tThe public/private key pair must exist before hand. The public key " |
| "certificate must be .PEM encoded and match the given private key." |
| msgstr "" |
| "\n" |
| "\t\tCreate a TLS secret from the given public/private key pair.\n" |
| "\n" |
| "\t\tThe public/private key pair must exist before hand. The public key " |
| "certificate must be .PEM encoded and match the given private key." |
| |
| #: pkg/kubectl/cmd/create_configmap.go:32 |
| msgid "" |
| "\n" |
| "\t\tCreate a configmap based on a file, directory, or specified literal " |
| "value.\n" |
| "\n" |
| "\t\tA single configmap may package one or more key/value pairs.\n" |
| "\n" |
| "\t\tWhen creating a configmap based on a file, the key will default to the " |
| "basename of the file, and the value will\n" |
| "\t\tdefault to the file content. If the basename is an invalid key, you may " |
| "specify an alternate key.\n" |
| "\n" |
| "\t\tWhen creating a configmap based on a directory, each file whose basename " |
| "is a valid key in the directory will be\n" |
| "\t\tpackaged into the configmap. Any directory entries except regular files " |
| "are ignored (e.g. subdirectories,\n" |
| "\t\tsymlinks, devices, pipes, etc)." |
| msgstr "" |
| "\n" |
| "\t\tCreate a configmap based on a file, directory, or specified literal " |
| "value.\n" |
| "\n" |
| "\t\tA single configmap may package one or more key/value pairs.\n" |
| "\n" |
| "\t\tWhen creating a configmap based on a file, the key will default to the " |
| "basename of the file, and the value will\n" |
| "\t\tdefault to the file content. If the basename is an invalid key, you may " |
| "specify an alternate key.\n" |
| "\n" |
| "\t\tWhen creating a configmap based on a directory, each file whose basename " |
| "is a valid key in the directory will be\n" |
| "\t\tpackaged into the configmap. Any directory entries except regular files " |
| "are ignored (e.g. subdirectories,\n" |
| "\t\tsymlinks, devices, pipes, etc)." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_namespace.go#L44 |
| #: pkg/kubectl/cmd/create_namespace.go:32 |
| msgid "" |
| "\n" |
| "\t\tCreate a namespace with the specified name." |
| msgstr "" |
| "\n" |
| "\t\tCreate a namespace with the specified name." |
| |
| #: pkg/kubectl/cmd/create_secret.go:119 |
| msgid "" |
| "\n" |
| "\t\tCreate a new secret for use with Docker registries.\n" |
| "\n" |
| "\t\tDockercfg secrets are used to authenticate against Docker registries.\n" |
| "\n" |
| "\t\tWhen using the Docker command line to push images, you can authenticate " |
| "to a given registry by running\n" |
| "\n" |
| "\t\t $ docker login DOCKER_REGISTRY_SERVER --username=DOCKER_USER --" |
| "password=DOCKER_PASSWORD --email=DOCKER_EMAIL'.\n" |
| "\n" |
| " That produces a ~/.dockercfg file that is used by subsequent 'docker " |
| "push' and 'docker pull' commands to\n" |
| "\t\tauthenticate to the registry. The email address is optional.\n" |
| "\n" |
| "\t\tWhen creating applications, you may have a Docker registry that requires " |
| "authentication. In order for the\n" |
| "\t\tnodes to pull images on your behalf, they have to have the credentials. " |
| "You can provide this information\n" |
| "\t\tby creating a dockercfg secret and attaching it to your service account." |
| msgstr "" |
| "\n" |
| "\t\tCreate a new secret for use with Docker registries.\n" |
| "\n" |
| "\t\tDockercfg secrets are used to authenticate against Docker registries.\n" |
| "\n" |
| "\t\tWhen using the Docker command line to push images, you can authenticate " |
| "to a given registry by running\n" |
| "\n" |
| "\t\t $ docker login DOCKER_REGISTRY_SERVER --username=DOCKER_USER --" |
| "password=DOCKER_PASSWORD --email=DOCKER_EMAIL'.\n" |
| "\n" |
| " That produces a ~/.dockercfg file that is used by subsequent 'docker " |
| "push' and 'docker pull' commands to\n" |
| "\t\tauthenticate to the registry. The email address is optional.\n" |
| "\n" |
| "\t\tWhen creating applications, you may have a Docker registry that requires " |
| "authentication. In order for the\n" |
| "\t\tnodes to pull images on your behalf, they have to have the credentials. " |
| "You can provide this information\n" |
| "\t\tby creating a dockercfg secret and attaching it to your service account." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_pdb.go#L49 |
| #: pkg/kubectl/cmd/create_pdb.go:32 |
| msgid "" |
| "\n" |
| "\t\tCreate a pod disruption budget with the specified name, selector, and " |
| "desired minimum available pods" |
| msgstr "" |
| "\n" |
| "\t\tCreate a pod disruption budget with the specified name, selector, and " |
| "desired minimum available pods" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create.go#L56 |
| #: pkg/kubectl/cmd/create.go:42 |
| msgid "" |
| "\n" |
| "\t\tCreate a resource by filename or stdin.\n" |
| "\n" |
| "\t\tJSON and YAML formats are accepted." |
| msgstr "" |
| "\n" |
| "\t\tCreate a resource by filename or stdin.\n" |
| "\n" |
| "\t\tJSON and YAML formats are accepted." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_quota.go#L47 |
| #: pkg/kubectl/cmd/create_quota.go:32 |
| msgid "" |
| "\n" |
| "\t\tCreate a resourcequota with the specified name, hard limits and optional " |
| "scopes" |
| msgstr "" |
| "\n" |
| "\t\tCreate a resourcequota with the specified name, hard limits and optional " |
| "scopes" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_quota.go#L47 |
| #: pkg/kubectl/cmd/create_role.go:38 |
| msgid "" |
| "\n" |
| "\t\tCreate a role with single rule." |
| msgstr "" |
| "\n" |
| "\t\tCreate a role with single rule." |
| |
| #: pkg/kubectl/cmd/create_secret.go:47 |
| msgid "" |
| "\n" |
| "\t\tCreate a secret based on a file, directory, or specified literal value.\n" |
| "\n" |
| "\t\tA single secret may package one or more key/value pairs.\n" |
| "\n" |
| "\t\tWhen creating a secret based on a file, the key will default to the " |
| "basename of the file, and the value will\n" |
| "\t\tdefault to the file content. If the basename is an invalid key, you may " |
| "specify an alternate key.\n" |
| "\n" |
| "\t\tWhen creating a secret based on a directory, each file whose basename is " |
| "a valid key in the directory will be\n" |
| "\t\tpackaged into the secret. Any directory entries except regular files " |
| "are ignored (e.g. subdirectories,\n" |
| "\t\tsymlinks, devices, pipes, etc)." |
| msgstr "" |
| "\n" |
| "\t\tCreate a secret based on a file, directory, or specified literal value.\n" |
| "\n" |
| "\t\tA single secret may package one or more key/value pairs.\n" |
| "\n" |
| "\t\tWhen creating a secret based on a file, the key will default to the " |
| "basename of the file, and the value will\n" |
| "\t\tdefault to the file content. If the basename is an invalid key, you may " |
| "specify an alternate key.\n" |
| "\n" |
| "\t\tWhen creating a secret based on a directory, each file whose basename is " |
| "a valid key in the directory will be\n" |
| "\t\tpackaged into the secret. Any directory entries except regular files " |
| "are ignored (e.g. subdirectories,\n" |
| "\t\tsymlinks, devices, pipes, etc)." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_serviceaccount.go#L44 |
| #: pkg/kubectl/cmd/create_serviceaccount.go:32 |
| msgid "" |
| "\n" |
| "\t\tCreate a service account with the specified name." |
| msgstr "" |
| "\n" |
| "\t\tCreate a service account with the specified name." |
| |
| #: pkg/kubectl/cmd/run.go:52 |
| msgid "" |
| "\n" |
| "\t\tCreate and run a particular image, possibly replicated.\n" |
| "\n" |
| "\t\tCreates a deployment or job to manage the created container(s)." |
| msgstr "" |
| "\n" |
| "\t\tCreate and run a particular image, possibly replicated.\n" |
| "\n" |
| "\t\tCreates a deployment or job to manage the created container(s)." |
| |
| #: pkg/kubectl/cmd/autoscale.go:34 |
| msgid "" |
| "\n" |
| "\t\tCreates an autoscaler that automatically chooses and sets the number of " |
| "pods that run in a kubernetes cluster.\n" |
| "\n" |
| "\t\tLooks up a Deployment, ReplicaSet, or ReplicationController by name and " |
| "creates an autoscaler that uses the given resource as a reference.\n" |
| "\t\tAn autoscaler can automatically increase or decrease number of pods " |
| "deployed within the system as needed." |
| msgstr "" |
| "\n" |
| "\t\tCreates an autoscaler that automatically chooses and sets the number of " |
| "pods that run in a kubernetes cluster.\n" |
| "\n" |
| "\t\tLooks up a Deployment, ReplicaSet, or ReplicationController by name and " |
| "creates an autoscaler that uses the given resource as a reference.\n" |
| "\t\tAn autoscaler can automatically increase or decrease number of pods " |
| "deployed within the system as needed." |
| |
| #: pkg/kubectl/cmd/delete.go:40 |
| msgid "" |
| "\n" |
| "\t\tDelete resources by filenames, stdin, resources and names, or by " |
| "resources and label selector.\n" |
| "\n" |
| "\t\tJSON and YAML formats are accepted. Only one type of the arguments may " |
| "be specified: filenames,\n" |
| "\t\tresources and names, or resources and label selector.\n" |
| "\n" |
| "\t\tSome resources, such as pods, support graceful deletion. These resources " |
| "define a default period\n" |
| "\t\tbefore they are forcibly terminated (the grace period) but you may " |
| "override that value with\n" |
| "\t\tthe --grace-period flag, or pass --now to set a grace-period of 1. " |
| "Because these resources often\n" |
| "\t\trepresent entities in the cluster, deletion may not be acknowledged " |
| "immediately. If the node\n" |
| "\t\thosting a pod is down or cannot reach the API server, termination may " |
| "take significantly longer\n" |
| "\t\tthan the grace period. To force delete a resource,\tyou must pass a grace" |
| "\tperiod of 0 and specify\n" |
| "\t\tthe --force flag.\n" |
| "\n" |
| "\t\tIMPORTANT: Force deleting pods does not wait for confirmation that the " |
| "pod's processes have been\n" |
| "\t\tterminated, which can leave those processes running until the node " |
| "detects the deletion and\n" |
| "\t\tcompletes graceful deletion. If your processes use shared storage or " |
| "talk to a remote API and\n" |
| "\t\tdepend on the name of the pod to identify themselves, force deleting " |
| "those pods may result in\n" |
| "\t\tmultiple processes running on different machines using the same " |
| "identification which may lead\n" |
| "\t\tto data corruption or inconsistency. Only force delete pods when you are " |
| "sure the pod is\n" |
| "\t\tterminated, or if your application can tolerate multiple copies of the " |
| "same pod running at once.\n" |
| "\t\tAlso, if you force delete pods the scheduler may place new pods on those " |
| "nodes before the node\n" |
| "\t\thas released those resources and causing those pods to be evicted " |
| "immediately.\n" |
| "\n" |
| "\t\tNote that the delete command does NOT do resource version checks, so if " |
| "someone\n" |
| "\t\tsubmits an update to a resource right when you submit a delete, their " |
| "update\n" |
| "\t\twill be lost along with the rest of the resource." |
| msgstr "" |
| "\n" |
| "\t\tDelete resources by filenames, stdin, resources and names, or by " |
| "resources and label selector.\n" |
| "\n" |
| "\t\tJSON and YAML formats are accepted. Only one type of the arguments may " |
| "be specified: filenames,\n" |
| "\t\tresources and names, or resources and label selector.\n" |
| "\n" |
| "\t\tSome resources, such as pods, support graceful deletion. These resources " |
| "define a default period\n" |
| "\t\tbefore they are forcibly terminated (the grace period) but you may " |
| "override that value with\n" |
| "\t\tthe --grace-period flag, or pass --now to set a grace-period of 1. " |
| "Because these resources often\n" |
| "\t\trepresent entities in the cluster, deletion may not be acknowledged " |
| "immediately. If the node\n" |
| "\t\thosting a pod is down or cannot reach the API server, termination may " |
| "take significantly longer\n" |
| "\t\tthan the grace period. To force delete a resource,\tyou must pass a grace" |
| "\tperiod of 0 and specify\n" |
| "\t\tthe --force flag.\n" |
| "\n" |
| "\t\tIMPORTANT: Force deleting pods does not wait for confirmation that the " |
| "pod's processes have been\n" |
| "\t\tterminated, which can leave those processes running until the node " |
| "detects the deletion and\n" |
| "\t\tcompletes graceful deletion. If your processes use shared storage or " |
| "talk to a remote API and\n" |
| "\t\tdepend on the name of the pod to identify themselves, force deleting " |
| "those pods may result in\n" |
| "\t\tmultiple processes running on different machines using the same " |
| "identification which may lead\n" |
| "\t\tto data corruption or inconsistency. Only force delete pods when you are " |
| "sure the pod is\n" |
| "\t\tterminated, or if your application can tolerate multiple copies of the " |
| "same pod running at once.\n" |
| "\t\tAlso, if you force delete pods the scheduler may place new pods on those " |
| "nodes before the node\n" |
| "\t\thas released those resources and causing those pods to be evicted " |
| "immediately.\n" |
| "\n" |
| "\t\tNote that the delete command does NOT do resource version checks, so if " |
| "someone\n" |
| "\t\tsubmits an update to a resource right when you submit a delete, their " |
| "update\n" |
| "\t\twill be lost along with the rest of the resource." |
| |
| #: pkg/kubectl/cmd/stop.go:31 |
| msgid "" |
| "\n" |
| "\t\tDeprecated: Gracefully shut down a resource by name or filename.\n" |
| "\n" |
| "\t\tThe stop command is deprecated, all its functionalities are covered by " |
| "delete command.\n" |
| "\t\tSee 'kubectl delete --help' for more details.\n" |
| "\n" |
| "\t\tAttempts to shut down and delete a resource that supports graceful " |
| "termination.\n" |
| "\t\tIf the resource is scalable it will be scaled to 0 before deletion." |
| msgstr "" |
| "\n" |
| "\t\tDeprecated: Gracefully shut down a resource by name or filename.\n" |
| "\n" |
| "\t\tThe stop command is deprecated, all its functionalities are covered by " |
| "delete command.\n" |
| "\t\tSee 'kubectl delete --help' for more details.\n" |
| "\n" |
| "\t\tAttempts to shut down and delete a resource that supports graceful " |
| "termination.\n" |
| "\t\tIf the resource is scalable it will be scaled to 0 before deletion." |
| |
| #: pkg/kubectl/cmd/top_node.go:60 |
| msgid "" |
| "\n" |
| "\t\tDisplay Resource (CPU/Memory/Storage) usage of nodes.\n" |
| "\n" |
| "\t\tThe top-node command allows you to see the resource consumption of nodes." |
| msgstr "" |
| "\n" |
| "\t\tDisplay Resource (CPU/Memory/Storage) usage of nodes.\n" |
| "\n" |
| "\t\tThe top-node command allows you to see the resource consumption of nodes." |
| |
| #: pkg/kubectl/cmd/top_pod.go:53 |
| msgid "" |
| "\n" |
| "\t\tDisplay Resource (CPU/Memory/Storage) usage of pods.\n" |
| "\n" |
| "\t\tThe 'top pod' command allows you to see the resource consumption of " |
| "pods.\n" |
| "\n" |
| "\t\tDue to the metrics pipeline delay, they may be unavailable for a few " |
| "minutes\n" |
| "\t\tsince pod creation." |
| msgstr "" |
| "\n" |
| "\t\tDisplay Resource (CPU/Memory/Storage) usage of pods.\n" |
| "\n" |
| "\t\tThe 'top pod' command allows you to see the resource consumption of " |
| "pods.\n" |
| "\n" |
| "\t\tDue to the metrics pipeline delay, they may be unavailable for a few " |
| "minutes\n" |
| "\t\tsince pod creation." |
| |
| #: pkg/kubectl/cmd/top.go:33 |
| msgid "" |
| "\n" |
| "\t\tDisplay Resource (CPU/Memory/Storage) usage.\n" |
| "\n" |
| "\t\tThe top command allows you to see the resource consumption for nodes or " |
| "pods.\n" |
| "\n" |
| "\t\tThis command requires Heapster to be correctly configured and working on " |
| "the server. " |
| msgstr "" |
| "\n" |
| "\t\tDisplay Resource (CPU/Memory/Storage) usage.\n" |
| "\n" |
| "\t\tThe top command allows you to see the resource consumption for nodes or " |
| "pods.\n" |
| "\n" |
| "\t\tThis command requires Heapster to be correctly configured and working on " |
| "the server. " |
| |
| #: pkg/kubectl/cmd/drain.go:140 |
| msgid "" |
| "\n" |
| "\t\tDrain node in preparation for maintenance.\n" |
| "\n" |
| "\t\tThe given node will be marked unschedulable to prevent new pods from " |
| "arriving.\n" |
| "\t\t'drain' evicts the pods if the APIServer supports eviction\n" |
| "\t\t(http://kubernetes.io/docs/admin/disruptions/). Otherwise, it will use " |
| "normal DELETE\n" |
| "\t\tto delete the pods.\n" |
| "\t\tThe 'drain' evicts or deletes all pods except mirror pods (which cannot " |
| "be deleted through\n" |
| "\t\tthe API server). If there are DaemonSet-managed pods, drain will not " |
| "proceed\n" |
| "\t\twithout --ignore-daemonsets, and regardless it will not delete any\n" |
| "\t\tDaemonSet-managed pods, because those pods would be immediately replaced " |
| "by the\n" |
| "\t\tDaemonSet controller, which ignores unschedulable markings. If there " |
| "are any\n" |
| "\t\tpods that are neither mirror pods nor managed by ReplicationController,\n" |
| "\t\tReplicaSet, DaemonSet, StatefulSet or Job, then drain will not delete " |
| "any pods unless you\n" |
| "\t\tuse --force. --force will also allow deletion to proceed if the " |
| "managing resource of one\n" |
| "\t\tor more pods is missing.\n" |
| "\n" |
| "\t\t'drain' waits for graceful termination. You should not operate on the " |
| "machine until\n" |
| "\t\tthe command completes.\n" |
| "\n" |
| "\t\tWhen you are ready to put the node back into service, use kubectl " |
| "uncordon, which\n" |
| "\t\twill make the node schedulable again.\n" |
| "\n" |
| "\t\t" |
| msgstr "" |
| "\n" |
| "\t\tDrain node in preparation for maintenance.\n" |
| "\n" |
| "\t\tThe given node will be marked unschedulable to prevent new pods from " |
| "arriving.\n" |
| "\t\t'drain' evicts the pods if the APIServer supports eviction\n" |
| "\t\t(http://kubernetes.io/docs/admin/disruptions/). Otherwise, it will use " |
| "normal DELETE\n" |
| "\t\tto delete the pods.\n" |
| "\t\tThe 'drain' evicts or deletes all pods except mirror pods (which cannot " |
| "be deleted through\n" |
| "\t\tthe API server). If there are DaemonSet-managed pods, drain will not " |
| "proceed\n" |
| "\t\twithout --ignore-daemonsets, and regardless it will not delete any\n" |
| "\t\tDaemonSet-managed pods, because those pods would be immediately replaced " |
| "by the\n" |
| "\t\tDaemonSet controller, which ignores unschedulable markings. If there " |
| "are any\n" |
| "\t\tpods that are neither mirror pods nor managed by ReplicationController,\n" |
| "\t\tReplicaSet, DaemonSet, StatefulSet or Job, then drain will not delete " |
| "any pods unless you\n" |
| "\t\tuse --force. --force will also allow deletion to proceed if the " |
| "managing resource of one\n" |
| "\t\tor more pods is missing.\n" |
| "\n" |
| "\t\t'drain' waits for graceful termination. You should not operate on the " |
| "machine until\n" |
| "\t\tthe command completes.\n" |
| "\n" |
| "\t\tWhen you are ready to put the node back into service, use kubectl " |
| "uncordon, which\n" |
| "\t\twill make the node schedulable again.\n" |
| "\n" |
| "\t\t" |
| |
| #: pkg/kubectl/cmd/edit.go:56 |
| msgid "" |
| "\n" |
| "\t\tEdit a resource from the default editor.\n" |
| "\n" |
| "\t\tThe edit command allows you to directly edit any API resource you can " |
| "retrieve via the\n" |
| "\t\tcommand line tools. It will open the editor defined by your KUBE_EDITOR, " |
| "or EDITOR\n" |
| "\t\tenvironment variables, or fall back to 'vi' for Linux or 'notepad' for " |
| "Windows.\n" |
| "\t\tYou can edit multiple objects, although changes are applied one at a " |
| "time. The command\n" |
| "\t\taccepts filenames as well as command line arguments, although the files " |
| "you point to must\n" |
| "\t\tbe previously saved versions of resources.\n" |
| "\n" |
| "\t\tEditing is done with the API version used to fetch the resource.\n" |
| "\t\tTo edit using a specific API version, fully-qualify the resource, " |
| "version, and group.\n" |
| "\n" |
| "\t\tThe default format is YAML. To edit in JSON, specify \"-o json\".\n" |
| "\n" |
| "\t\tThe flag --windows-line-endings can be used to force Windows line " |
| "endings,\n" |
| "\t\totherwise the default for your operating system will be used.\n" |
| "\n" |
| "\t\tIn the event an error occurs while updating, a temporary file will be " |
| "created on disk\n" |
| "\t\tthat contains your unapplied changes. The most common error when " |
| "updating a resource\n" |
| "\t\tis another editor changing the resource on the server. When this occurs, " |
| "you will have\n" |
| "\t\tto apply your changes to the newer version of the resource, or update " |
| "your temporary\n" |
| "\t\tsaved copy to include the latest resource version." |
| msgstr "" |
| "\n" |
| "\t\tEdit a resource from the default editor.\n" |
| "\n" |
| "\t\tThe edit command allows you to directly edit any API resource you can " |
| "retrieve via the\n" |
| "\t\tcommand line tools. It will open the editor defined by your KUBE_EDITOR, " |
| "or EDITOR\n" |
| "\t\tenvironment variables, or fall back to 'vi' for Linux or 'notepad' for " |
| "Windows.\n" |
| "\t\tYou can edit multiple objects, although changes are applied one at a " |
| "time. The command\n" |
| "\t\taccepts filenames as well as command line arguments, although the files " |
| "you point to must\n" |
| "\t\tbe previously saved versions of resources.\n" |
| "\n" |
| "\t\tEditing is done with the API version used to fetch the resource.\n" |
| "\t\tTo edit using a specific API version, fully-qualify the resource, " |
| "version, and group.\n" |
| "\n" |
| "\t\tThe default format is YAML. To edit in JSON, specify \"-o json\".\n" |
| "\n" |
| "\t\tThe flag --windows-line-endings can be used to force Windows line " |
| "endings,\n" |
| "\t\totherwise the default for your operating system will be used.\n" |
| "\n" |
| "\t\tIn the event an error occurs while updating, a temporary file will be " |
| "created on disk\n" |
| "\t\tthat contains your unapplied changes. The most common error when " |
| "updating a resource\n" |
| "\t\tis another editor changing the resource on the server. When this occurs, " |
| "you will have\n" |
| "\t\tto apply your changes to the newer version of the resource, or update " |
| "your temporary\n" |
| "\t\tsaved copy to include the latest resource version." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/drain.go#L127 |
| #: pkg/kubectl/cmd/drain.go:115 |
| msgid "" |
| "\n" |
| "\t\tMark node as schedulable." |
| msgstr "" |
| "\n" |
| "\t\tMark node as schedulable." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/drain.go#L102 |
| #: pkg/kubectl/cmd/drain.go:90 |
| msgid "" |
| "\n" |
| "\t\tMark node as unschedulable." |
| msgstr "" |
| "\n" |
| "\t\tMark node as unschedulable." |
| |
| #: pkg/kubectl/cmd/completion.go:47 |
| msgid "" |
| "\n" |
| "\t\tOutput shell completion code for the specified shell (bash or zsh).\n" |
| "\t\tThe shell code must be evaluated to provide interactive\n" |
| "\t\tcompletion of kubectl commands. This can be done by sourcing it from\n" |
| "\t\tthe .bash_profile.\n" |
| "\n" |
| "\t\tNote: this requires the bash-completion framework, which is not " |
| "installed\n" |
| "\t\tby default on Mac. This can be installed by using homebrew:\n" |
| "\n" |
| "\t\t $ brew install bash-completion\n" |
| "\n" |
| "\t\tOnce installed, bash_completion must be evaluated. This can be done by " |
| "adding the\n" |
| "\t\tfollowing line to the .bash_profile\n" |
| "\n" |
| "\t\t $ source $(brew --prefix)/etc/bash_completion\n" |
| "\n" |
| "\t\tNote for zsh users: [1] zsh completions are only supported in versions " |
| "of zsh >= 5.2" |
| msgstr "" |
| "\n" |
| "\t\tOutput shell completion code for the specified shell (bash or zsh).\n" |
| "\t\tThe shell code must be evaluated to provide interactive\n" |
| "\t\tcompletion of kubectl commands. This can be done by sourcing it from\n" |
| "\t\tthe .bash_profile.\n" |
| "\n" |
| "\t\tNote: this requires the bash-completion framework, which is not " |
| "installed\n" |
| "\t\tby default on Mac. This can be installed by using homebrew:\n" |
| "\n" |
| "\t\t $ brew install bash-completion\n" |
| "\n" |
| "\t\tOnce installed, bash_completion must be evaluated. This can be done by " |
| "adding the\n" |
| "\t\tfollowing line to the .bash_profile\n" |
| "\n" |
| "\t\t $ source $(brew --prefix)/etc/bash_completion\n" |
| "\n" |
| "\t\tNote for zsh users: [1] zsh completions are only supported in versions " |
| "of zsh >= 5.2" |
| |
| #: pkg/kubectl/cmd/rollingupdate.go:45 |
| msgid "" |
| "\n" |
| "\t\tPerform a rolling update of the given ReplicationController.\n" |
| "\n" |
| "\t\tReplaces the specified replication controller with a new replication " |
| "controller by updating one pod at a time to use the\n" |
| "\t\tnew PodTemplate. The new-controller.json must specify the same namespace " |
| "as the\n" |
| "\t\texisting replication controller and overwrite at least one (common) " |
| "label in its replicaSelector.\n" |
| "\n" |
| "\t\t" |
| msgstr "" |
| "\n" |
| "\t\tPerform a rolling update of the given ReplicationController.\n" |
| "\n" |
| "\t\tReplaces the specified replication controller with a new replication " |
| "controller by updating one pod at a time to use the\n" |
| "\t\tnew PodTemplate. The new-controller.json must specify the same namespace " |
| "as the\n" |
| "\t\texisting replication controller and overwrite at least one (common) " |
| "label in its replicaSelector.\n" |
| "\n" |
| "\t\t" |
| |
| #: pkg/kubectl/cmd/replace.go:40 |
| msgid "" |
| "\n" |
| "\t\tReplace a resource by filename or stdin.\n" |
| "\n" |
| "\t\tJSON and YAML formats are accepted. If replacing an existing resource, " |
| "the\n" |
| "\t\tcomplete resource spec must be provided. This can be obtained by\n" |
| "\n" |
| "\t\t $ kubectl get TYPE NAME -o yaml\n" |
| "\n" |
| "\t\tPlease refer to the models in https://htmlpreview.github.io/?https://" |
| "github.com/kubernetes/kubernetes/blob/HEAD/docs/api-reference/v1/definitions." |
| "html to find if a field is mutable." |
| msgstr "" |
| "\n" |
| "\t\tReplace a resource by filename or stdin.\n" |
| "\n" |
| "\t\tJSON and YAML formats are accepted. If replacing an existing resource, " |
| "the\n" |
| "\t\tcomplete resource spec must be provided. This can be obtained by\n" |
| "\n" |
| "\t\t $ kubectl get TYPE NAME -o yaml\n" |
| "\n" |
| "\t\tPlease refer to the models in https://htmlpreview.github.io/?https://" |
| "github.com/kubernetes/kubernetes/blob/HEAD/docs/api-reference/v1/definitions." |
| "html to find if a field is mutable." |
| |
| #: pkg/kubectl/cmd/scale.go:34 |
| msgid "" |
| "\n" |
| "\t\tSet a new size for a Deployment, ReplicaSet, Replication Controller, or " |
| "Job.\n" |
| "\n" |
| "\t\tScale also allows users to specify one or more preconditions for the " |
| "scale action.\n" |
| "\n" |
| "\t\tIf --current-replicas or --resource-version is specified, it is " |
| "validated before the\n" |
| "\t\tscale is attempted, and it is guaranteed that the precondition holds " |
| "true when the\n" |
| "\t\tscale is sent to the server." |
| msgstr "" |
| "\n" |
| "\t\tSet a new size for a Deployment, ReplicaSet, Replication Controller, or " |
| "Job.\n" |
| "\n" |
| "\t\tScale also allows users to specify one or more preconditions for the " |
| "scale action.\n" |
| "\n" |
| "\t\tIf --current-replicas or --resource-version is specified, it is " |
| "validated before the\n" |
| "\t\tscale is attempted, and it is guaranteed that the precondition holds " |
| "true when the\n" |
| "\t\tscale is sent to the server." |
| |
| #: pkg/kubectl/cmd/apply_set_last_applied.go:62 |
| msgid "" |
| "\n" |
| "\t\tSet the latest last-applied-configuration annotations by setting it to " |
| "match the contents of a file.\n" |
| "\t\tThis results in the last-applied-configuration being updated as though " |
| "'kubectl apply -f <file>' was run,\n" |
| "\t\twithout updating any other parts of the object." |
| msgstr "" |
| "\n" |
| "\t\tSet the latest last-applied-configuration annotations by setting it to " |
| "match the contents of a file.\n" |
| "\t\tThis results in the last-applied-configuration being updated as though " |
| "'kubectl apply -f <file>' was run,\n" |
| "\t\twithout updating any other parts of the object." |
| |
| #: pkg/kubectl/cmd/proxy.go:36 |
| msgid "" |
| "\n" |
| "\t\tTo proxy all of the kubernetes api and nothing else, use:\n" |
| "\n" |
| "\t\t $ kubectl proxy --api-prefix=/\n" |
| "\n" |
| "\t\tTo proxy only part of the kubernetes api and also some static files:\n" |
| "\n" |
| "\t\t $ kubectl proxy --www=/my/files --www-prefix=/static/ --api-prefix=/" |
| "api/\n" |
| "\n" |
| "\t\tThe above lets you 'curl localhost:8001/api/v1/pods'.\n" |
| "\n" |
| "\t\tTo proxy the entire kubernetes api at a different root, use:\n" |
| "\n" |
| "\t\t $ kubectl proxy --api-prefix=/custom/\n" |
| "\n" |
| "\t\tThe above lets you 'curl localhost:8001/custom/api/v1/pods'" |
| msgstr "" |
| "\n" |
| "\t\tTo proxy all of the kubernetes api and nothing else, use:\n" |
| "\n" |
| "\t\t $ kubectl proxy --api-prefix=/\n" |
| "\n" |
| "\t\tTo proxy only part of the kubernetes api and also some static files:\n" |
| "\n" |
| "\t\t $ kubectl proxy --www=/my/files --www-prefix=/static/ --api-prefix=/" |
| "api/\n" |
| "\n" |
| "\t\tThe above lets you 'curl localhost:8001/api/v1/pods'.\n" |
| "\n" |
| "\t\tTo proxy the entire kubernetes api at a different root, use:\n" |
| "\n" |
| "\t\t $ kubectl proxy --api-prefix=/custom/\n" |
| "\n" |
| "\t\tThe above lets you 'curl localhost:8001/custom/api/v1/pods'" |
| |
| #: pkg/kubectl/cmd/patch.go:59 |
| msgid "" |
| "\n" |
| "\t\tUpdate field(s) of a resource using strategic merge patch\n" |
| "\n" |
| "\t\tJSON and YAML formats are accepted.\n" |
| "\n" |
| "\t\tPlease refer to the models in https://htmlpreview.github.io/?https://" |
| "github.com/kubernetes/kubernetes/blob/HEAD/docs/api-reference/v1/definitions." |
| "html to find if a field is mutable." |
| msgstr "" |
| "\n" |
| "\t\tUpdate field(s) of a resource using strategic merge patch\n" |
| "\n" |
| "\t\tJSON and YAML formats are accepted.\n" |
| "\n" |
| "\t\tPlease refer to the models in https://htmlpreview.github.io/?https://" |
| "github.com/kubernetes/kubernetes/blob/HEAD/docs/api-reference/v1/definitions." |
| "html to find if a field is mutable." |
| |
| #: pkg/kubectl/cmd/label.go:70 |
| #, c-format |
| msgid "" |
| "\n" |
| "\t\tUpdate the labels on a resource.\n" |
| "\n" |
| "\t\t* A label must begin with a letter or number, and may contain letters, " |
| "numbers, hyphens, dots, and underscores, up to %[1]d characters.\n" |
| "\t\t* If --overwrite is true, then existing labels can be overwritten, " |
| "otherwise attempting to overwrite a label will result in an error.\n" |
| "\t\t* If --resource-version is specified, then updates will use this " |
| "resource version, otherwise the existing resource-version will be used." |
| msgstr "" |
| "\n" |
| "\t\tUpdate the labels on a resource.\n" |
| "\n" |
| "\t\t* A label must begin with a letter or number, and may contain letters, " |
| "numbers, hyphens, dots, and underscores, up to %[1]d characters.\n" |
| "\t\t* If --overwrite is true, then existing labels can be overwritten, " |
| "otherwise attempting to overwrite a label will result in an error.\n" |
| "\t\t* If --resource-version is specified, then updates will use this " |
| "resource version, otherwise the existing resource-version will be used." |
| |
| #: pkg/kubectl/cmd/taint.go:58 |
| #, c-format |
| msgid "" |
| "\n" |
| "\t\tUpdate the taints on one or more nodes.\n" |
| "\n" |
| "\t\t* A taint consists of a key, value, and effect. As an argument here, it " |
| "is expressed as key=value:effect.\n" |
| "\t\t* The key must begin with a letter or number, and may contain letters, " |
| "numbers, hyphens, dots, and underscores, up to %[1]d characters.\n" |
| "\t\t* The value must begin with a letter or number, and may contain letters, " |
| "numbers, hyphens, dots, and underscores, up to %[2]d characters.\n" |
| "\t\t* The effect must be NoSchedule, PreferNoSchedule or NoExecute.\n" |
| "\t\t* Currently taint can only apply to node." |
| msgstr "" |
| "\n" |
| "\t\tUpdate the taints on one or more nodes.\n" |
| "\n" |
| "\t\t* A taint consists of a key, value, and effect. As an argument here, it " |
| "is expressed as key=value:effect.\n" |
| "\t\t* The key must begin with a letter or number, and may contain letters, " |
| "numbers, hyphens, dots, and underscores, up to %[1]d characters.\n" |
| "\t\t* The value must begin with a letter or number, and may contain letters, " |
| "numbers, hyphens, dots, and underscores, up to %[2]d characters.\n" |
| "\t\t* The effect must be NoSchedule, PreferNoSchedule or NoExecute.\n" |
| "\t\t* Currently taint can only apply to node." |
| |
| #: pkg/kubectl/cmd/apply_view_last_applied.go:46 |
| msgid "" |
| "\n" |
| "\t\tView the latest last-applied-configuration annotations by type/name or " |
| "file.\n" |
| "\n" |
| "\t\tThe default output will be printed to stdout in YAML format. One can use " |
| "-o option\n" |
| "\t\tto change output format." |
| msgstr "" |
| "\n" |
| "\t\tView the latest last-applied-configuration annotations by type/name or " |
| "file.\n" |
| "\n" |
| "\t\tThe default output will be printed to stdout in YAML format. One can use " |
| "-o option\n" |
| "\t\tto change output format." |
| |
| #: pkg/kubectl/cmd/cp.go:37 |
| msgid "" |
| "\n" |
| "\t # !!!Important Note!!!\n" |
| "\t # Requires that the 'tar' binary is present in your container\n" |
| "\t # image. If 'tar' is not present, 'kubectl cp' will fail.\n" |
| "\n" |
| "\t # Copy /tmp/foo_dir local directory to /tmp/bar_dir in a remote pod in " |
| "the default namespace\n" |
| "\t\tkubectl cp /tmp/foo_dir <some-pod>:/tmp/bar_dir\n" |
| "\n" |
| " # Copy /tmp/foo local file to /tmp/bar in a remote pod in a specific " |
| "container\n" |
| "\t\tkubectl cp /tmp/foo <some-pod>:/tmp/bar -c <specific-container>\n" |
| "\n" |
| "\t\t# Copy /tmp/foo local file to /tmp/bar in a remote pod in namespace " |
| "<some-namespace>\n" |
| "\t\tkubectl cp /tmp/foo <some-namespace>/<some-pod>:/tmp/bar\n" |
| "\n" |
| "\t\t# Copy /tmp/foo from a remote pod to /tmp/bar locally\n" |
| "\t\tkubectl cp <some-namespace>/<some-pod>:/tmp/foo /tmp/bar" |
| msgstr "" |
| "\n" |
| "\t # !!!Important Note!!!\n" |
| "\t # Requires that the 'tar' binary is present in your container\n" |
| "\t # image. If 'tar' is not present, 'kubectl cp' will fail.\n" |
| "\n" |
| "\t # Copy /tmp/foo_dir local directory to /tmp/bar_dir in a remote pod in " |
| "the default namespace\n" |
| "\t\tkubectl cp /tmp/foo_dir <some-pod>:/tmp/bar_dir\n" |
| "\n" |
| " # Copy /tmp/foo local file to /tmp/bar in a remote pod in a specific " |
| "container\n" |
| "\t\tkubectl cp /tmp/foo <some-pod>:/tmp/bar -c <specific-container>\n" |
| "\n" |
| "\t\t# Copy /tmp/foo local file to /tmp/bar in a remote pod in namespace " |
| "<some-namespace>\n" |
| "\t\tkubectl cp /tmp/foo <some-namespace>/<some-pod>:/tmp/bar\n" |
| "\n" |
| "\t\t# Copy /tmp/foo from a remote pod to /tmp/bar locally\n" |
| "\t\tkubectl cp <some-namespace>/<some-pod>:/tmp/foo /tmp/bar" |
| |
| #: pkg/kubectl/cmd/create_secret.go:205 |
| msgid "" |
| "\n" |
| "\t # Create a new TLS secret named tls-secret with the given key pair:\n" |
| "\t kubectl create secret tls tls-secret --cert=path/to/tls.cert --key=path/" |
| "to/tls.key" |
| msgstr "" |
| "\n" |
| "\t # Create a new TLS secret named tls-secret with the given key pair:\n" |
| "\t kubectl create secret tls tls-secret --cert=path/to/tls.cert --key=path/" |
| "to/tls.key" |
| |
| #: pkg/kubectl/cmd/create_namespace.go:35 |
| msgid "" |
| "\n" |
| "\t # Create a new namespace named my-namespace\n" |
| "\t kubectl create namespace my-namespace" |
| msgstr "" |
| "\n" |
| "\t # Create a new namespace named my-namespace\n" |
| "\t kubectl create namespace my-namespace" |
| |
| #: pkg/kubectl/cmd/create_secret.go:59 |
| msgid "" |
| "\n" |
| "\t # Create a new secret named my-secret with keys for each file in folder " |
| "bar\n" |
| "\t kubectl create secret generic my-secret --from-file=path/to/bar\n" |
| "\n" |
| "\t # Create a new secret named my-secret with specified keys instead of " |
| "names on disk\n" |
| "\t kubectl create secret generic my-secret --from-file=ssh-privatekey=~/." |
| "ssh/id_rsa --from-file=ssh-publickey=~/.ssh/id_rsa.pub\n" |
| "\n" |
| "\t # Create a new secret named my-secret with key1=supersecret and " |
| "key2=topsecret\n" |
| "\t kubectl create secret generic my-secret --from-literal=key1=supersecret " |
| "--from-literal=key2=topsecret" |
| msgstr "" |
| "\n" |
| "\t # Create a new secret named my-secret with keys for each file in folder " |
| "bar\n" |
| "\t kubectl create secret generic my-secret --from-file=path/to/bar\n" |
| "\n" |
| "\t # Create a new secret named my-secret with specified keys instead of " |
| "names on disk\n" |
| "\t kubectl create secret generic my-secret --from-file=ssh-privatekey=~/." |
| "ssh/id_rsa --from-file=ssh-publickey=~/.ssh/id_rsa.pub\n" |
| "\n" |
| "\t # Create a new secret named my-secret with key1=supersecret and " |
| "key2=topsecret\n" |
| "\t kubectl create secret generic my-secret --from-literal=key1=supersecret " |
| "--from-literal=key2=topsecret" |
| |
| #: pkg/kubectl/cmd/create_serviceaccount.go:35 |
| msgid "" |
| "\n" |
| "\t # Create a new service account named my-service-account\n" |
| "\t kubectl create serviceaccount my-service-account" |
| msgstr "" |
| "\n" |
| "\t # Create a new service account named my-service-account\n" |
| "\t kubectl create serviceaccount my-service-account" |
| |
| #: pkg/kubectl/cmd/create_service.go:232 |
| msgid "" |
| "\n" |
| "\t# Create a new ExternalName service named my-ns \n" |
| "\tkubectl create service externalname my-ns --external-name bar.com" |
| msgstr "" |
| "\n" |
| "\t# Create a new ExternalName service named my-ns \n" |
| "\tkubectl create service externalname my-ns --external-name bar.com" |
| |
| #: pkg/kubectl/cmd/create_service.go:225 |
| msgid "" |
| "\n" |
| "\tCreate an ExternalName service with the specified name.\n" |
| "\n" |
| "\tExternalName service references to an external DNS address instead of\n" |
| "\tonly pods, which will allow application authors to reference services\n" |
| "\tthat exist off platform, on other clusters, or locally." |
| msgstr "" |
| "\n" |
| "\tCreate an ExternalName service with the specified name.\n" |
| "\n" |
| "\tExternalName service references to an external DNS address instead of\n" |
| "\tonly pods, which will allow application authors to reference services\n" |
| "\tthat exist off platform, on other clusters, or locally." |
| |
| #: pkg/kubectl/cmd/help.go:30 |
| msgid "" |
| "\n" |
| "\tHelp provides help for any command in the application.\n" |
| "\tSimply type kubectl help [path to command] for full details." |
| msgstr "" |
| "\n" |
| "\tHelp provides help for any command in the application.\n" |
| "\tSimply type kubectl help [path to command] for full details." |
| |
| #: pkg/kubectl/cmd/create_service.go:173 |
| msgid "" |
| "\n" |
| " # Create a new LoadBalancer service named my-lbs\n" |
| " kubectl create service loadbalancer my-lbs --tcp=5678:8080" |
| msgstr "" |
| "\n" |
| " # Create a new LoadBalancer service named my-lbs\n" |
| " kubectl create service loadbalancer my-lbs --tcp=5678:8080" |
| |
| #: pkg/kubectl/cmd/create_service.go:53 |
| msgid "" |
| "\n" |
| " # Create a new clusterIP service named my-cs\n" |
| " kubectl create service clusterip my-cs --tcp=5678:8080\n" |
| "\n" |
| " # Create a new clusterIP service named my-cs (in headless mode)\n" |
| " kubectl create service clusterip my-cs --clusterip=\"None\"" |
| msgstr "" |
| "\n" |
| " # Create a new clusterIP service named my-cs\n" |
| " kubectl create service clusterip my-cs --tcp=5678:8080\n" |
| "\n" |
| " # Create a new clusterIP service named my-cs (in headless mode)\n" |
| " kubectl create service clusterip my-cs --clusterip=\"None\"" |
| |
| #: pkg/kubectl/cmd/create_deployment.go:36 |
| msgid "" |
| "\n" |
| " # Create a new deployment named my-dep that runs the busybox image.\n" |
| " kubectl create deployment my-dep --image=busybox" |
| msgstr "" |
| "\n" |
| " # Create a new deployment named my-dep that runs the busybox image.\n" |
| " kubectl create deployment my-dep --image=busybox" |
| |
| #: pkg/kubectl/cmd/create_service.go:116 |
| msgid "" |
| "\n" |
| " # Create a new nodeport service named my-ns\n" |
| " kubectl create service nodeport my-ns --tcp=5678:8080" |
| msgstr "" |
| "\n" |
| " # Create a new nodeport service named my-ns\n" |
| " kubectl create service nodeport my-ns --tcp=5678:8080" |
| |
| #: pkg/kubectl/cmd/clusterinfo_dump.go:62 |
| msgid "" |
| "\n" |
| " # Dump current cluster state to stdout\n" |
| " kubectl cluster-info dump\n" |
| "\n" |
| " # Dump current cluster state to /path/to/cluster-state\n" |
| " kubectl cluster-info dump --output-directory=/path/to/cluster-state\n" |
| "\n" |
| " # Dump all namespaces to stdout\n" |
| " kubectl cluster-info dump --all-namespaces\n" |
| "\n" |
| " # Dump a set of namespaces to /path/to/cluster-state\n" |
| " kubectl cluster-info dump --namespaces default,kube-system --output-" |
| "directory=/path/to/cluster-state" |
| msgstr "" |
| "\n" |
| " # Dump current cluster state to stdout\n" |
| " kubectl cluster-info dump\n" |
| "\n" |
| " # Dump current cluster state to /path/to/cluster-state\n" |
| " kubectl cluster-info dump --output-directory=/path/to/cluster-state\n" |
| "\n" |
| " # Dump all namespaces to stdout\n" |
| " kubectl cluster-info dump --all-namespaces\n" |
| "\n" |
| " # Dump a set of namespaces to /path/to/cluster-state\n" |
| " kubectl cluster-info dump --namespaces default,kube-system --output-" |
| "directory=/path/to/cluster-state" |
| |
| #: pkg/kubectl/cmd/annotate.go:78 |
| msgid "" |
| "\n" |
| " # Update pod 'foo' with the annotation 'description' and the value 'my " |
| "frontend'.\n" |
| " # If the same annotation is set multiple times, only the last value will " |
| "be applied\n" |
| " kubectl annotate pods foo description='my frontend'\n" |
| "\n" |
| " # Update a pod identified by type and name in \"pod.json\"\n" |
| " kubectl annotate -f pod.json description='my frontend'\n" |
| "\n" |
| " # Update pod 'foo' with the annotation 'description' and the value 'my " |
| "frontend running nginx', overwriting any existing value.\n" |
| " kubectl annotate --overwrite pods foo description='my frontend running " |
| "nginx'\n" |
| "\n" |
| " # Update all pods in the namespace\n" |
| " kubectl annotate pods --all description='my frontend running nginx'\n" |
| "\n" |
| " # Update pod 'foo' only if the resource is unchanged from version 1.\n" |
| " kubectl annotate pods foo description='my frontend running nginx' --" |
| "resource-version=1\n" |
| "\n" |
| " # Update pod 'foo' by removing an annotation named 'description' if it " |
| "exists.\n" |
| " # Does not require the --overwrite flag.\n" |
| " kubectl annotate pods foo description-" |
| msgstr "" |
| "\n" |
| " # Update pod 'foo' with the annotation 'description' and the value 'my " |
| "frontend'.\n" |
| " # If the same annotation is set multiple times, only the last value will " |
| "be applied\n" |
| " kubectl annotate pods foo description='my frontend'\n" |
| "\n" |
| " # Update a pod identified by type and name in \"pod.json\"\n" |
| " kubectl annotate -f pod.json description='my frontend'\n" |
| "\n" |
| " # Update pod 'foo' with the annotation 'description' and the value 'my " |
| "frontend running nginx', overwriting any existing value.\n" |
| " kubectl annotate --overwrite pods foo description='my frontend running " |
| "nginx'\n" |
| "\n" |
| " # Update all pods in the namespace\n" |
| " kubectl annotate pods --all description='my frontend running nginx'\n" |
| "\n" |
| " # Update pod 'foo' only if the resource is unchanged from version 1.\n" |
| " kubectl annotate pods foo description='my frontend running nginx' --" |
| "resource-version=1\n" |
| "\n" |
| " # Update pod 'foo' by removing an annotation named 'description' if it " |
| "exists.\n" |
| " # Does not require the --overwrite flag.\n" |
| " kubectl annotate pods foo description-" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_namespace.go#L44 |
| #: pkg/kubectl/cmd/create_service.go:170 |
| msgid "" |
| "\n" |
| " Create a LoadBalancer service with the specified name." |
| msgstr "" |
| "\n" |
| " Create a LoadBalancer service with the specified name." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_serviceaccount.go#L44 |
| #: pkg/kubectl/cmd/create_service.go:50 |
| msgid "" |
| "\n" |
| " Create a clusterIP service with the specified name." |
| msgstr "" |
| "\n" |
| " Create a clusterIP service with the specified name." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_deployment.go#L44 |
| #: pkg/kubectl/cmd/create_deployment.go:33 |
| msgid "" |
| "\n" |
| " Create a deployment with the specified name." |
| msgstr "" |
| "\n" |
| " Create a deployment with the specified name." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_deployment.go#L44 |
| #: pkg/kubectl/cmd/create_service.go:113 |
| msgid "" |
| "\n" |
| " Create a nodeport service with the specified name." |
| msgstr "" |
| "\n" |
| " Create a nodeport service with the specified name." |
| |
| #: pkg/kubectl/cmd/clusterinfo_dump.go:53 |
| msgid "" |
| "\n" |
| " Dumps cluster info out suitable for debugging and diagnosing cluster " |
| "problems. By default, dumps everything to\n" |
| " stdout. You can optionally specify a directory with --output-directory. " |
| "If you specify a directory, kubernetes will\n" |
| " build a set of files in that directory. By default only dumps things in " |
| "the 'kube-system' namespace, but you can\n" |
| " switch to a different namespace with the --namespaces flag, or specify --" |
| "all-namespaces to dump all namespaces.\n" |
| "\n" |
| " The command also dumps the logs of all of the pods in the cluster, these " |
| "logs are dumped into different directories\n" |
| " based on namespace and pod name." |
| msgstr "" |
| "\n" |
| " Dumps cluster info out suitable for debugging and diagnosing cluster " |
| "problems. By default, dumps everything to\n" |
| " stdout. You can optionally specify a directory with --output-directory. " |
| "If you specify a directory, kubernetes will\n" |
| " build a set of files in that directory. By default only dumps things in " |
| "the 'kube-system' namespace, but you can\n" |
| " switch to a different namespace with the --namespaces flag, or specify --" |
| "all-namespaces to dump all namespaces.\n" |
| "\n" |
| " The command also dumps the logs of all of the pods in the cluster, these " |
| "logs are dumped into different directories\n" |
| " based on namespace and pod name." |
| |
| #: pkg/kubectl/cmd/clusterinfo.go:37 |
| msgid "" |
| "\n" |
| " Display addresses of the master and services with label kubernetes.io/" |
| "cluster-service=true\n" |
| " To further debug and diagnose cluster problems, use 'kubectl cluster-info " |
| "dump'." |
| msgstr "" |
| "\n" |
| " Display addresses of the master and services with label kubernetes.io/" |
| "cluster-service=true\n" |
| " To further debug and diagnose cluster problems, use 'kubectl cluster-info " |
| "dump'." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_quota.go#L61 |
| #: pkg/kubectl/cmd/create_quota.go:62 |
| msgid "" |
| "A comma-delimited set of quota scopes that must all match each object " |
| "tracked by the quota." |
| msgstr "" |
| "A comma-delimited set of quota scopes that must all match each object " |
| "tracked by the quota." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_quota.go#L60 |
| #: pkg/kubectl/cmd/create_quota.go:61 |
| msgid "" |
| "A comma-delimited set of resource=quantity pairs that define a hard limit." |
| msgstr "" |
| "A comma-delimited set of resource=quantity pairs that define a hard limit." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_pdb.go#L63 |
| #: pkg/kubectl/cmd/create_pdb.go:64 |
| msgid "" |
| "A label selector to use for this budget. Only equality-based selector " |
| "requirements are supported." |
| msgstr "" |
| "A label selector to use for this budget. Only equality-based selector " |
| "requirements are supported." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/expose.go#L106 |
| #: pkg/kubectl/cmd/expose.go:104 |
| msgid "" |
| "A label selector to use for this service. Only equality-based selector " |
| "requirements are supported. If empty (the default) infer the selector from " |
| "the replication controller or replica set.)" |
| msgstr "" |
| "A label selector to use for this service. Only equality-based selector " |
| "requirements are supported. If empty (the default) infer the selector from " |
| "the replication controller or replica set.)" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/run.go#L136 |
| #: pkg/kubectl/cmd/run.go:139 |
| msgid "A schedule in the Cron format the job should be run with." |
| msgstr "A schedule in the Cron format the job should be run with." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/expose.go#L111 |
| #: pkg/kubectl/cmd/expose.go:109 |
| msgid "" |
| "Additional external IP address (not managed by Kubernetes) to accept for the " |
| "service. If this IP is routed to a node, the service can be accessed by this " |
| "IP in addition to its generated service IP." |
| msgstr "" |
| "Additional external IP address (not managed by Kubernetes) to accept for the " |
| "service. If this IP is routed to a node, the service can be accessed by this " |
| "IP in addition to its generated service IP." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/run.go#L119 |
| #: pkg/kubectl/cmd/expose.go:110 pkg/kubectl/cmd/run.go:122 |
| msgid "" |
| "An inline JSON override for the generated object. If this is non-empty, it " |
| "is used to override the generated object. Requires that the object supply a " |
| "valid apiVersion field." |
| msgstr "" |
| "An inline JSON override for the generated object. If this is non-empty, it " |
| "is used to override the generated object. Requires that the object supply a " |
| "valid apiVersion field." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/run.go#L134 |
| #: pkg/kubectl/cmd/run.go:137 |
| msgid "" |
| "An inline JSON override for the generated service object. If this is non-" |
| "empty, it is used to override the generated object. Requires that the object " |
| "supply a valid apiVersion field. Only used if --expose is true." |
| msgstr "" |
| "An inline JSON override for the generated service object. If this is non-" |
| "empty, it is used to override the generated object. Requires that the object " |
| "supply a valid apiVersion field. Only used if --expose is true." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/apply.go#L98 |
| #: pkg/kubectl/cmd/apply.go:104 |
| msgid "Apply a configuration to a resource by filename or stdin" |
| msgstr "Apply a configuration to a resource by filename or stdin" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/certificates.go#L71 |
| #: pkg/kubectl/cmd/certificates.go:72 |
| msgid "Approve a certificate signing request" |
| msgstr "Approve a certificate signing request" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_service.go#L81 |
| #: pkg/kubectl/cmd/create_service.go:82 |
| msgid "" |
| "Assign your own ClusterIP or set to 'None' for a 'headless' service (no " |
| "loadbalancing)." |
| msgstr "" |
| "Assign your own ClusterIP or set to 'None' for a 'headless' service (no " |
| "loadbalancing)." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/attach.go#L64 |
| #: pkg/kubectl/cmd/attach.go:70 |
| msgid "Attach to a running container" |
| msgstr "Attach to a running container" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/autoscale.go#L55 |
| #: pkg/kubectl/cmd/autoscale.go:56 |
| msgid "Auto-scale a Deployment, ReplicaSet, or ReplicationController" |
| msgstr "Auto-scale a Deployment, ReplicaSet, or ReplicationController" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/expose.go#L115 |
| #: pkg/kubectl/cmd/expose.go:113 |
| msgid "" |
| "ClusterIP to be assigned to the service. Leave empty to auto-allocate, or " |
| "set to 'None' to create a headless service." |
| msgstr "" |
| "ClusterIP to be assigned to the service. Leave empty to auto-allocate, or " |
| "set to 'None' to create a headless service." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_clusterrolebinding.go#L55 |
| #: pkg/kubectl/cmd/create_clusterrolebinding.go:56 |
| msgid "ClusterRole this ClusterRoleBinding should reference" |
| msgstr "ClusterRole this ClusterRoleBinding should reference" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_rolebinding.go#L55 |
| #: pkg/kubectl/cmd/create_rolebinding.go:56 |
| msgid "ClusterRole this RoleBinding should reference" |
| msgstr "ClusterRole this RoleBinding should reference" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/rollingupdate.go#L101 |
| #: pkg/kubectl/cmd/rollingupdate.go:102 |
| msgid "" |
| "Container name which will have its image upgraded. Only relevant when --" |
| "image is specified, ignored otherwise. Required when using --image on a " |
| "multi-container pod" |
| msgstr "" |
| "Container name which will have its image upgraded. Only relevant when --" |
| "image is specified, ignored otherwise. Required when using --image on a " |
| "multi-container pod" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/convert.go#L67 |
| #: pkg/kubectl/cmd/convert.go:68 |
| msgid "Convert config files between different API versions" |
| msgstr "Convert config files between different API versions" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/cp.go#L64 |
| #: pkg/kubectl/cmd/cp.go:65 |
| msgid "Copy files and directories to and from containers." |
| msgstr "Copy files and directories to and from containers." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_clusterrolebinding.go#L43 |
| #: pkg/kubectl/cmd/create_clusterrolebinding.go:44 |
| msgid "Create a ClusterRoleBinding for a particular ClusterRole" |
| msgstr "Create a ClusterRoleBinding for a particular ClusterRole" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_service.go#L181 |
| #: pkg/kubectl/cmd/create_service.go:182 |
| msgid "Create a LoadBalancer service." |
| msgstr "Create a LoadBalancer service." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_service.go#L124 |
| #: pkg/kubectl/cmd/create_service.go:125 |
| msgid "Create a NodePort service." |
| msgstr "Create a NodePort service." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_rolebinding.go#L43 |
| #: pkg/kubectl/cmd/create_rolebinding.go:44 |
| msgid "Create a RoleBinding for a particular Role or ClusterRole" |
| msgstr "Create a RoleBinding for a particular Role or ClusterRole" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_secret.go#L214 |
| #: pkg/kubectl/cmd/create_secret.go:214 |
| msgid "Create a TLS secret" |
| msgstr "Create a TLS secret" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_service.go#L68 |
| #: pkg/kubectl/cmd/create_service.go:69 |
| msgid "Create a clusterIP service." |
| msgstr "Create a clusterIP service." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_configmap.go#L59 |
| #: pkg/kubectl/cmd/create_configmap.go:60 |
| msgid "Create a configmap from a local file, directory or literal value" |
| msgstr "Create a configmap from a local file, directory or literal value" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_deployment.go#L44 |
| #: pkg/kubectl/cmd/create_deployment.go:46 |
| msgid "Create a deployment with the specified name." |
| msgstr "Create a deployment with the specified name." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_namespace.go#L44 |
| #: pkg/kubectl/cmd/create_namespace.go:45 |
| msgid "Create a namespace with the specified name" |
| msgstr "Create a namespace with the specified name" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_pdb.go#L49 |
| #: pkg/kubectl/cmd/create_pdb.go:50 |
| msgid "Create a pod disruption budget with the specified name." |
| msgstr "Create a pod disruption budget with the specified name." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_quota.go#L47 |
| #: pkg/kubectl/cmd/create_quota.go:48 |
| msgid "Create a quota with the specified name." |
| msgstr "Create a quota with the specified name." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create.go#L56 |
| #: pkg/kubectl/cmd/create.go:63 |
| msgid "Create a resource by filename or stdin" |
| msgstr "Create a resource by filename or stdin" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_secret.go#L143 |
| #: pkg/kubectl/cmd/create_secret.go:144 |
| msgid "Create a secret for use with a Docker registry" |
| msgstr "Create a secret for use with a Docker registry" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_secret.go#L73 |
| #: pkg/kubectl/cmd/create_secret.go:74 |
| msgid "Create a secret from a local file, directory or literal value" |
| msgstr "Create a secret from a local file, directory or literal value" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_secret.go#L34 |
| #: pkg/kubectl/cmd/create_secret.go:35 |
| msgid "Create a secret using specified subcommand" |
| msgstr "Create a secret using specified subcommand" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_serviceaccount.go#L44 |
| #: pkg/kubectl/cmd/create_serviceaccount.go:45 |
| msgid "Create a service account with the specified name" |
| msgstr "Create a service account with the specified name" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_service.go#L36 |
| #: pkg/kubectl/cmd/create_service.go:37 |
| msgid "Create a service using specified subcommand." |
| msgstr "Create a service using specified subcommand." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_service.go#L240 |
| #: pkg/kubectl/cmd/create_service.go:241 |
| msgid "Create an ExternalName service." |
| msgstr "Create an ExternalName service." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/delete.go#L130 |
| #: pkg/kubectl/cmd/delete.go:132 |
| msgid "" |
| "Delete resources by filenames, stdin, resources and names, or by resources " |
| "and label selector" |
| msgstr "" |
| "Delete resources by filenames, stdin, resources and names, or by resources " |
| "and label selector" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/config/delete_cluster.go#L38 |
| #: pkg/kubectl/cmd/config/delete_cluster.go:39 |
| msgid "Delete the specified cluster from the kubeconfig" |
| msgstr "Delete the specified cluster from the kubeconfig" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/config/delete_context.go#L38 |
| #: pkg/kubectl/cmd/config/delete_context.go:39 |
| msgid "Delete the specified context from the kubeconfig" |
| msgstr "Delete the specified context from the kubeconfig" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/certificates.go#L121 |
| #: pkg/kubectl/cmd/certificates.go:122 |
| msgid "Deny a certificate signing request" |
| msgstr "Deny a certificate signing request" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/stop.go#L58 |
| #: pkg/kubectl/cmd/stop.go:59 |
| msgid "Deprecated: Gracefully shut down a resource by name or filename" |
| msgstr "Deprecated: Gracefully shut down a resource by name or filename" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/config/get_contexts.go#L62 |
| #: pkg/kubectl/cmd/config/get_contexts.go:64 |
| msgid "Describe one or many contexts" |
| msgstr "Describe one or many contexts" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/top_node.go#L77 |
| #: pkg/kubectl/cmd/top_node.go:78 |
| msgid "Display Resource (CPU/Memory) usage of nodes" |
| msgstr "Display Resource (CPU/Memory) usage of nodes" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/top_pod.go#L79 |
| #: pkg/kubectl/cmd/top_pod.go:80 |
| msgid "Display Resource (CPU/Memory) usage of pods" |
| msgstr "Display Resource (CPU/Memory) usage of pods" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/top.go#L43 |
| #: pkg/kubectl/cmd/top.go:44 |
| msgid "Display Resource (CPU/Memory) usage." |
| msgstr "Display Resource (CPU/Memory) usage." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/clusterinfo.go#L49 |
| #: pkg/kubectl/cmd/clusterinfo.go:51 |
| msgid "Display cluster info" |
| msgstr "Display cluster info" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/config/get_clusters.go#L40 |
| #: pkg/kubectl/cmd/config/get_clusters.go:41 |
| msgid "Display clusters defined in the kubeconfig" |
| msgstr "Display clusters defined in the kubeconfig" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/config/view.go#L64 |
| #: pkg/kubectl/cmd/config/view.go:67 |
| msgid "Display merged kubeconfig settings or a specified kubeconfig file" |
| msgstr "Display merged kubeconfig settings or a specified kubeconfig file" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/get.go#L107 |
| #: pkg/kubectl/cmd/get.go:111 |
| msgid "Display one or many resources" |
| msgstr "Display one or many resources" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/config/current_context.go#L48 |
| #: pkg/kubectl/cmd/config/current_context.go:49 |
| msgid "Displays the current-context" |
| msgstr "Displays the current-context" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/explain.go#L50 |
| #: pkg/kubectl/cmd/explain.go:51 |
| msgid "Documentation of resources" |
| msgstr "Documentation of resources" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/drain.go#L176 |
| #: pkg/kubectl/cmd/drain.go:178 |
| msgid "Drain node in preparation for maintenance" |
| msgstr "Drain node in preparation for maintenance" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/clusterinfo_dump.go#L37 |
| #: pkg/kubectl/cmd/clusterinfo_dump.go:39 |
| msgid "Dump lots of relevant info for debugging and diagnosis" |
| msgstr "Dump lots of relevant info for debugging and diagnosis" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/edit.go#L100 |
| #: pkg/kubectl/cmd/edit.go:110 |
| msgid "Edit a resource on the server" |
| msgstr "Edit a resource on the server" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_secret.go#L159 |
| #: pkg/kubectl/cmd/create_secret.go:160 |
| msgid "Email for Docker registry" |
| msgstr "Email for Docker registry" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/exec.go#L68 |
| #: pkg/kubectl/cmd/exec.go:69 |
| msgid "Execute a command in a container" |
| msgstr "Execute a command in a container" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/rollingupdate.go#L102 |
| #: pkg/kubectl/cmd/rollingupdate.go:103 |
| msgid "" |
| "Explicit policy for when to pull container images. Required when --image is " |
| "same as existing image, ignored otherwise." |
| msgstr "" |
| "Explicit policy for when to pull container images. Required when --image is " |
| "same as existing image, ignored otherwise." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/portforward.go#L75 |
| #: pkg/kubectl/cmd/portforward.go:76 |
| msgid "Forward one or more local ports to a pod" |
| msgstr "Forward one or more local ports to a pod" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/help.go#L36 |
| #: pkg/kubectl/cmd/help.go:37 |
| msgid "Help about any command" |
| msgstr "Help about any command" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/expose.go#L105 |
| #: pkg/kubectl/cmd/expose.go:103 |
| msgid "" |
| "IP to assign to the Load Balancer. If empty, an ephemeral IP will be created " |
| "and used (cloud-provider specific)." |
| msgstr "" |
| "IP to assign to the Load Balancer. If empty, an ephemeral IP will be created " |
| "and used (cloud-provider specific)." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/expose.go#L114 |
| #: pkg/kubectl/cmd/expose.go:112 |
| msgid "" |
| "If non-empty, set the session affinity for the service to this; legal " |
| "values: 'None', 'ClientIP'" |
| msgstr "" |
| "If non-empty, set the session affinity for the service to this; legal " |
| "values: 'None', 'ClientIP'" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/annotate.go#L135 |
| #: pkg/kubectl/cmd/annotate.go:136 |
| msgid "" |
| "If non-empty, the annotation update will only succeed if this is the current " |
| "resource-version for the object. Only valid when specifying a single " |
| "resource." |
| msgstr "" |
| "If non-empty, the annotation update will only succeed if this is the current " |
| "resource-version for the object. Only valid when specifying a single " |
| "resource." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/label.go#L132 |
| #: pkg/kubectl/cmd/label.go:134 |
| msgid "" |
| "If non-empty, the labels update will only succeed if this is the current " |
| "resource-version for the object. Only valid when specifying a single " |
| "resource." |
| msgstr "" |
| "If non-empty, the labels update will only succeed if this is the current " |
| "resource-version for the object. Only valid when specifying a single " |
| "resource." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/rollingupdate.go#L98 |
| #: pkg/kubectl/cmd/rollingupdate.go:99 |
| msgid "" |
| "Image to use for upgrading the replication controller. Must be distinct from " |
| "the existing image (either new image or new image tag). Can not be used " |
| "with --filename/-f" |
| msgstr "" |
| "Image to use for upgrading the replication controller. Must be distinct from " |
| "the existing image (either new image or new image tag). Can not be used " |
| "with --filename/-f" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/rollout/rollout.go#L46 |
| #: pkg/kubectl/cmd/rollout/rollout.go:47 |
| msgid "Manage a deployment rollout" |
| msgstr "Manage a deployment rollout" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/drain.go#L127 |
| #: pkg/kubectl/cmd/drain.go:128 |
| msgid "Mark node as schedulable" |
| msgstr "Mark node as schedulable" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/drain.go#L102 |
| #: pkg/kubectl/cmd/drain.go:103 |
| msgid "Mark node as unschedulable" |
| msgstr "Mark node as unschedulable" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/rollout/rollout_pause.go#L73 |
| #: pkg/kubectl/cmd/rollout/rollout_pause.go:74 |
| msgid "Mark the provided resource as paused" |
| msgstr "Mark the provided resource as paused" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/certificates.go#L35 |
| #: pkg/kubectl/cmd/certificates.go:36 |
| msgid "Modify certificate resources." |
| msgstr "Modify certificate resources." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/config/config.go#L39 |
| #: pkg/kubectl/cmd/config/config.go:40 |
| msgid "Modify kubeconfig files" |
| msgstr "Modify kubeconfig files" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/expose.go#L110 |
| #: pkg/kubectl/cmd/expose.go:108 |
| msgid "" |
| "Name or number for the port on the container that the service should direct " |
| "traffic to. Optional." |
| msgstr "" |
| "Name or number for the port on the container that the service should direct " |
| "traffic to. Optional." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/logs.go#L108 |
| #: pkg/kubectl/cmd/logs.go:113 |
| msgid "" |
| "Only return logs after a specific date (RFC3339). Defaults to all logs. Only " |
| "one of since-time / since may be used." |
| msgstr "" |
| "Only return logs after a specific date (RFC3339). Defaults to all logs. Only " |
| "one of since-time / since may be used." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/completion.go#L97 |
| #: pkg/kubectl/cmd/completion.go:104 |
| msgid "Output shell completion code for the specified shell (bash or zsh)" |
| msgstr "Output shell completion code for the specified shell (bash or zsh)" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/edit.go#L115 |
| #: pkg/kubectl/cmd/convert.go:85 |
| msgid "" |
| "Output the formatted object with the given group version (for ex: " |
| "'extensions/v1beta1').)" |
| msgstr "" |
| "Output the formatted object with the given group version (for ex: " |
| "'extensions/v1beta1').)" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_secret.go#L157 |
| #: pkg/kubectl/cmd/create_secret.go:158 |
| msgid "Password for Docker registry authentication" |
| msgstr "Password for Docker registry authentication" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_secret.go#L226 |
| #: pkg/kubectl/cmd/create_secret.go:226 |
| msgid "Path to PEM encoded public key certificate." |
| msgstr "Path to PEM encoded public key certificate." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_secret.go#L227 |
| #: pkg/kubectl/cmd/create_secret.go:227 |
| msgid "Path to private key associated with given certificate." |
| msgstr "Path to private key associated with given certificate." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/rollingupdate.go#L84 |
| #: pkg/kubectl/cmd/rollingupdate.go:85 |
| msgid "Perform a rolling update of the given ReplicationController" |
| msgstr "Perform a rolling update of the given ReplicationController" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/scale.go#L82 |
| #: pkg/kubectl/cmd/scale.go:83 |
| msgid "" |
| "Precondition for resource version. Requires that the current resource " |
| "version match this value in order to scale." |
| msgstr "" |
| "Precondition for resource version. Requires that the current resource " |
| "version match this value in order to scale." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/version.go#L39 |
| #: pkg/kubectl/cmd/version.go:40 |
| msgid "Print the client and server version information" |
| msgstr "Print the client and server version information" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/options.go#L37 |
| #: pkg/kubectl/cmd/options.go:38 |
| msgid "Print the list of flags inherited by all commands" |
| msgstr "Print the list of flags inherited by all commands" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/logs.go#L86 |
| #: pkg/kubectl/cmd/logs.go:93 |
| msgid "Print the logs for a container in a pod" |
| msgstr "Print the logs for a container in a pod" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/replace.go#L70 |
| #: pkg/kubectl/cmd/replace.go:71 |
| msgid "Replace a resource by filename or stdin" |
| msgstr "Replace a resource by filename or stdin" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/rollout/rollout_resume.go#L71 |
| #: pkg/kubectl/cmd/rollout/rollout_resume.go:72 |
| msgid "Resume a paused resource" |
| msgstr "Resume a paused resource" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_rolebinding.go#L56 |
| #: pkg/kubectl/cmd/create_rolebinding.go:57 |
| msgid "Role this RoleBinding should reference" |
| msgstr "Role this RoleBinding should reference" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/run.go#L94 |
| #: pkg/kubectl/cmd/run.go:97 |
| msgid "Run a particular image on the cluster" |
| msgstr "Run a particular image on the cluster" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/proxy.go#L68 |
| #: pkg/kubectl/cmd/proxy.go:69 |
| msgid "Run a proxy to the Kubernetes API server" |
| msgstr "Run a proxy to the Kubernetes API server" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_secret.go#L161 |
| #: pkg/kubectl/cmd/create_secret.go:161 |
| msgid "Server location for Docker registry" |
| msgstr "Server location for Docker registry" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/scale.go#L71 |
| #: pkg/kubectl/cmd/scale.go:71 |
| msgid "" |
| "Set a new size for a Deployment, ReplicaSet, Replication Controller, or Job" |
| msgstr "" |
| "Set a new size for a Deployment, ReplicaSet, Replication Controller, or Job" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/set/set.go#L37 |
| #: pkg/kubectl/cmd/set/set.go:38 |
| msgid "Set specific features on objects" |
| msgstr "Set specific features on objects" |
| |
| #: pkg/kubectl/cmd/apply_set_last_applied.go:83 |
| msgid "" |
| "Set the last-applied-configuration annotation on a live object to match the " |
| "contents of a file." |
| msgstr "" |
| "Set the last-applied-configuration annotation on a live object to match the " |
| "contents of a file." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/set/set_selector.go#L81 |
| #: pkg/kubectl/cmd/set/set_selector.go:82 |
| msgid "Set the selector on a resource" |
| msgstr "Set the selector on a resource" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/config/create_cluster.go#L67 |
| #: pkg/kubectl/cmd/config/create_cluster.go:68 |
| msgid "Sets a cluster entry in kubeconfig" |
| msgstr "Sets a cluster entry in kubeconfig" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/config/create_context.go#L57 |
| #: pkg/kubectl/cmd/config/create_context.go:58 |
| msgid "Sets a context entry in kubeconfig" |
| msgstr "Sets a context entry in kubeconfig" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/config/create_authinfo.go#L103 |
| #: pkg/kubectl/cmd/config/create_authinfo.go:104 |
| msgid "Sets a user entry in kubeconfig" |
| msgstr "Sets a user entry in kubeconfig" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/config/set.go#L59 |
| #: pkg/kubectl/cmd/config/set.go:60 |
| msgid "Sets an individual value in a kubeconfig file" |
| msgstr "Sets an individual value in a kubeconfig file" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/config/use_context.go#L48 |
| #: pkg/kubectl/cmd/config/use_context.go:49 |
| msgid "Sets the current-context in a kubeconfig file" |
| msgstr "Sets the current-context in a kubeconfig file" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/describe.go#L80 |
| #: pkg/kubectl/cmd/describe.go:86 |
| msgid "Show details of a specific resource or group of resources" |
| msgstr "Show details of a specific resource or group of resources" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/rollout/rollout_status.go#L57 |
| #: pkg/kubectl/cmd/rollout/rollout_status.go:58 |
| msgid "Show the status of the rollout" |
| msgstr "Show the status of the rollout" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/expose.go#L108 |
| #: pkg/kubectl/cmd/expose.go:106 |
| msgid "Synonym for --target-port" |
| msgstr "Synonym for --target-port" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/expose.go#L87 |
| #: pkg/kubectl/cmd/expose.go:88 |
| msgid "" |
| "Take a replication controller, service, deployment or pod and expose it as a " |
| "new Kubernetes Service" |
| msgstr "" |
| "Take a replication controller, service, deployment or pod and expose it as a " |
| "new Kubernetes Service" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/run.go#L114 |
| #: pkg/kubectl/cmd/run.go:117 |
| msgid "The image for the container to run." |
| msgstr "The image for the container to run." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/run.go#L116 |
| #: pkg/kubectl/cmd/run.go:119 |
| msgid "" |
| "The image pull policy for the container. If left empty, this value will not " |
| "be specified by the client and defaulted by the server" |
| msgstr "" |
| "The image pull policy for the container. If left empty, this value will not " |
| "be specified by the client and defaulted by the server" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/rollingupdate.go#L100 |
| #: pkg/kubectl/cmd/rollingupdate.go:101 |
| msgid "" |
| "The key to use to differentiate between two different controllers, default " |
| "'deployment'. Only relevant when --image is specified, ignored otherwise" |
| msgstr "" |
| "The key to use to differentiate between two different controllers, default " |
| "'deployment'. Only relevant when --image is specified, ignored otherwise" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_pdb.go#L62 |
| #: pkg/kubectl/cmd/create_pdb.go:63 |
| msgid "" |
| "The minimum number or percentage of available pods this budget requires." |
| msgstr "" |
| "The minimum number or percentage of available pods this budget requires." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/expose.go#L113 |
| #: pkg/kubectl/cmd/expose.go:111 |
| msgid "The name for the newly created object." |
| msgstr "The name for the newly created object." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/autoscale.go#L71 |
| #: pkg/kubectl/cmd/autoscale.go:72 |
| msgid "" |
| "The name for the newly created object. If not specified, the name of the " |
| "input resource will be used." |
| msgstr "" |
| "The name for the newly created object. If not specified, the name of the " |
| "input resource will be used." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/run.go#L113 |
| #: pkg/kubectl/cmd/run.go:116 |
| msgid "" |
| "The name of the API generator to use, see http://kubernetes.io/docs/user-" |
| "guide/kubectl-conventions/#generators for a list." |
| msgstr "" |
| "The name of the API generator to use, see http://kubernetes.io/docs/user-" |
| "guide/kubectl-conventions/#generators for a list." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/autoscale.go#L66 |
| #: pkg/kubectl/cmd/autoscale.go:67 |
| msgid "" |
| "The name of the API generator to use. Currently there is only 1 generator." |
| msgstr "" |
| "The name of the API generator to use. Currently there is only 1 generator." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/expose.go#L98 |
| #: pkg/kubectl/cmd/expose.go:99 |
| msgid "" |
| "The name of the API generator to use. There are 2 generators: 'service/v1' " |
| "and 'service/v2'. The only difference between them is that service port in " |
| "v1 is named 'default', while it is left unnamed in v2. Default is 'service/" |
| "v2'." |
| msgstr "" |
| "The name of the API generator to use. There are 2 generators: 'service/v1' " |
| "and 'service/v2'. The only difference between them is that service port in " |
| "v1 is named 'default', while it is left unnamed in v2. Default is 'service/" |
| "v2'." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/run.go#L133 |
| #: pkg/kubectl/cmd/run.go:136 |
| msgid "" |
| "The name of the generator to use for creating a service. Only used if --" |
| "expose is true" |
| msgstr "" |
| "The name of the generator to use for creating a service. Only used if --" |
| "expose is true" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/expose.go#L99 |
| #: pkg/kubectl/cmd/expose.go:100 |
| msgid "The network protocol for the service to be created. Default is 'TCP'." |
| msgstr "The network protocol for the service to be created. Default is 'TCP'." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/expose.go#L100 |
| #: pkg/kubectl/cmd/expose.go:101 |
| msgid "" |
| "The port that the service should serve on. Copied from the resource being " |
| "exposed, if unspecified" |
| msgstr "" |
| "The port that the service should serve on. Copied from the resource being " |
| "exposed, if unspecified" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/run.go#L121 |
| #: pkg/kubectl/cmd/run.go:124 |
| msgid "" |
| "The port that this container exposes. If --expose is true, this is also the " |
| "port used by the service that is created." |
| msgstr "" |
| "The port that this container exposes. If --expose is true, this is also the " |
| "port used by the service that is created." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/run.go#L131 |
| #: pkg/kubectl/cmd/run.go:134 |
| msgid "" |
| "The resource requirement limits for this container. For example, 'cpu=200m," |
| "memory=512Mi'. Note that server side components may assign limits depending " |
| "on the server configuration, such as limit ranges." |
| msgstr "" |
| "The resource requirement limits for this container. For example, 'cpu=200m," |
| "memory=512Mi'. Note that server side components may assign limits depending " |
| "on the server configuration, such as limit ranges." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/run.go#L130 |
| #: pkg/kubectl/cmd/run.go:133 |
| msgid "" |
| "The resource requirement requests for this container. For example, " |
| "'cpu=100m,memory=256Mi'. Note that server side components may assign " |
| "requests depending on the server configuration, such as limit ranges." |
| msgstr "" |
| "The resource requirement requests for this container. For example, " |
| "'cpu=100m,memory=256Mi'. Note that server side components may assign " |
| "requests depending on the server configuration, such as limit ranges." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/run.go#L128 |
| #: pkg/kubectl/cmd/run.go:131 |
| msgid "" |
| "The restart policy for this Pod. Legal values [Always, OnFailure, Never]. " |
| "If set to 'Always' a deployment is created, if set to 'OnFailure' a job is " |
| "created, if set to 'Never', a regular pod is created. For the latter two --" |
| "replicas must be 1. Default 'Always', for CronJobs `Never`." |
| msgstr "" |
| "The restart policy for this Pod. Legal values [Always, OnFailure, Never]. " |
| "If set to 'Always' a deployment is created, if set to 'OnFailure' a job is " |
| "created, if set to 'Never', a regular pod is created. For the latter two --" |
| "replicas must be 1. Default 'Always', for CronJobs `Never`." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_secret.go#L87 |
| #: pkg/kubectl/cmd/create_secret.go:88 |
| msgid "The type of secret to create" |
| msgstr "The type of secret to create" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/expose.go#L101 |
| #: pkg/kubectl/cmd/expose.go:102 |
| msgid "" |
| "Type for this service: ClusterIP, NodePort, or LoadBalancer. Default is " |
| "'ClusterIP'." |
| msgstr "" |
| "Type for this service: ClusterIP, NodePort, or LoadBalancer. Default is " |
| "'ClusterIP'." |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/rollout/rollout_undo.go#L71 |
| #: pkg/kubectl/cmd/rollout/rollout_undo.go:72 |
| msgid "Undo a previous rollout" |
| msgstr "Undo a previous rollout" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/config/unset.go#L47 |
| #: pkg/kubectl/cmd/config/unset.go:48 |
| msgid "Unsets an individual value in a kubeconfig file" |
| msgstr "Unsets an individual value in a kubeconfig file" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/patch.go#L91 |
| #: pkg/kubectl/cmd/patch.go:96 |
| msgid "Update field(s) of a resource using strategic merge patch" |
| msgstr "Update field(s) of a resource using strategic merge patch" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/set/set_image.go#L94 |
| #: pkg/kubectl/cmd/set/set_image.go:95 |
| msgid "Update image of a pod template" |
| msgstr "Update image of a pod template" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/set/set_resources.go#L101 |
| #: pkg/kubectl/cmd/set/set_resources.go:102 |
| msgid "Update resource requests/limits on objects with pod templates" |
| msgstr "Update resource requests/limits on objects with pod templates" |
| |
| #: pkg/kubectl/cmd/annotate.go:116 |
| msgid "Update the annotations on a resource" |
| msgstr "Update the annotations on a resource" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/label.go#L109 |
| #: pkg/kubectl/cmd/label.go:114 |
| msgid "Update the labels on a resource" |
| msgstr "Update the labels on a resource" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/taint.go#L88 |
| #: pkg/kubectl/cmd/taint.go:87 |
| msgid "Update the taints on one or more nodes" |
| msgstr "Update the taints on one or more nodes" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_secret.go#L155 |
| #: pkg/kubectl/cmd/create_secret.go:156 |
| msgid "Username for Docker registry authentication" |
| msgstr "Username for Docker registry authentication" |
| |
| #: pkg/kubectl/cmd/apply_view_last_applied.go:64 |
| msgid "View latest last-applied-configuration annotations of a resource/object" |
| msgstr "" |
| "View latest last-applied-configuration annotations of a resource/object" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/rollout/rollout_history.go#L51 |
| #: pkg/kubectl/cmd/rollout/rollout_history.go:52 |
| msgid "View rollout history" |
| msgstr "View rollout history" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/clusterinfo_dump.go#L45 |
| #: pkg/kubectl/cmd/clusterinfo_dump.go:46 |
| msgid "" |
| "Where to output the files. If empty or '-' uses stdout, otherwise creates a " |
| "directory hierarchy in that directory" |
| msgstr "" |
| "Where to output the files. If empty or '-' uses stdout, otherwise creates a " |
| "directory hierarchy in that directory" |
| |
| #: pkg/kubectl/cmd/run_test.go:85 |
| msgid "dummy restart flag)" |
| msgstr "dummy restart flag)" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/create_service.go#L253 |
| #: pkg/kubectl/cmd/create_service.go:254 |
| msgid "external name of service" |
| msgstr "external name of service" |
| |
| # https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/cmd.go#L217 |
| #: pkg/kubectl/cmd/cmd.go:227 |
| msgid "kubectl controls the Kubernetes cluster manager" |
| msgstr "kubectl controls the Kubernetes cluster manager" |
| |
| #~ msgid "" |
| #~ "watch is only supported on individual resources and resource collections " |
| #~ "- %d resources were found" |
| #~ msgid_plural "" |
| #~ "watch is only supported on individual resources and resource collections " |
| #~ "- %d resources were found" |
| #~ msgstr[0] "" |
| #~ "watch is only supported on individual resources and resource collections " |
| #~ "- %d resource was found" |
| #~ msgstr[1] "" |
| #~ "watch is only supported on individual resources and resource collections " |
| #~ "- %d resources were found" |
