# SOME DESCRIPTIVE TITLE.
# Copyright (C) 2014, Apache Software Foundation
# This file is distributed under the same license as the Apache CloudStack Installation Documentation package.
# 
# Translators:
msgid ""
msgstr ""
"Project-Id-Version: Apache CloudStack Installation RTD\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2014-06-30 11:42+0200\n"
"PO-Revision-Date: 2014-06-30 10:25+0000\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: Chinese (China) (http://www.transifex.com/projects/p/apache-cloudstack-installation-rtd/language/zh_CN/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zh_CN\n"
"Plural-Forms: nplurals=1; plural=0;\n"

# 3ea1be6cb6c044ee88d6bbfe51d5a36f
#: ../../optional_installation.rst:18
msgid "Additional Installation Options"
msgstr "附加安装选项"

# 4be66c8884c44e5c92d33460a6cfbc99
#: ../../optional_installation.rst:20
msgid ""
"The next few sections describe CloudStack features above and beyond the "
"basic deployment options."
msgstr "除了基本的部署选项之外，接下来的几节将描述CloudStack的特性。"

# d620c97521d0471dbe9914ee7961101d
#: ../../optional_installation.rst:25
msgid "Installing the Usage Server (Optional)"
msgstr "安装Usage服务（可选）"

# eba0c3d4623f4e30a2de16e6e1d3afbe
#: ../../optional_installation.rst:27
msgid ""
"You can optionally install the Usage Server once the Management Server is "
"configured properly. The Usage Server takes data from the events in the "
"system and enables usage-based billing for accounts."
msgstr "管理服务器配置完毕后，你可以选择安装Usage服务器。Usage服务器从系统事件中提取数据，便于对账户进行使用计费。"

# 2132611e22ac4180882c9e149411e658
#: ../../optional_installation.rst:31
msgid ""
"When multiple Management Servers are present, the Usage Server may be "
"installed on any number of them. The Usage Servers will coordinate usage "
"processing. A site that is concerned about availability should install Usage"
" Servers on at least two Management Servers."
msgstr "当存在多台管理服务器时，可以选择在它们上面安装任意数量的Usage服务器。Usage服务器会协调处理。考虑到高可用性，所以最少在两台管理服务器中安装Usage服务器。"

# d0a9099047bd453a90fef5ce7d86283b
#: ../../optional_installation.rst:38
msgid "Requirements for Installing the Usage Server"
msgstr "安装Usage服务器的要求"

# 0443dcade9d44c4ca65794d68927d9ca
#: ../../optional_installation.rst:40
msgid ""
"The Management Server must be running when the Usage Server is installed."
msgstr "Usage服务器安装时，管理服务器必须在运行状态。"

# 309364cef90c4a6fbf5a8394ac1e35c4
#: ../../optional_installation.rst:43
msgid ""
"The Usage Server must be installed on the same server as a Management "
"Server."
msgstr "Usage服务器必须与管理服务器安装在同一台服务器中。"

# a251a7029fa243b691964f23e74a9ed4
#: ../../optional_installation.rst:48
msgid "Steps to Install the Usage Server"
msgstr "安装Usage服务器的步骤"

# 79637a12758d457f9620403344f42b69
#: ../../optional_installation.rst:50
msgid "Run ./install.sh (NOT VALID, NEED CORRECTION)"
msgstr "运行 ./install.sh (这是旧版本的安装方法，目前应通过yum命令安装usage的RPM包，此处文档应修改。)"

# b47571da344e4965be7a837f8ebe714a
#: ../../optional_installation.rst:56
msgid ""
"You should see a few messages as the installer prepares, followed by a list "
"of choices."
msgstr "你会看到几条安装准备时的消息，紧接着是一个选择列表。"

# 52d83849a75649fbaba2e382ef537b2e
#: ../../optional_installation.rst:59
msgid "Choose \"S\" to install the Usage Server."
msgstr "选择 \"S\" 安装使用服务器。"

# 1139aed06e7d4d259522f2bf84205698
#: ../../optional_installation.rst:65
msgid "Once installed, start the Usage Server with the following command."
msgstr "安装成功后，使用如下命令启动Usage服务器。"

# f85323259c174815b1da8521f464edda
#: ../../optional_installation.rst:71
msgid ""
"The Administration Guide discusses further configuration of the Usage "
"Server."
msgstr "管理指南中会进一步讨论Usage服务器的配置。"

# 62c0216a817941d59e5712145ef98305
#: ../../optional_installation.rst:76
msgid "SSL (Optional)"
msgstr "SSL (可选)"

# 1cc339b8bee1425a9342eddde3366517
#: ../../optional_installation.rst:78
msgid ""
"CloudStack provides HTTP access in its default installation. There are a "
"number of technologies and sites which choose to implement SSL. As a result,"
" we have left CloudStack to expose HTTP under the assumption that a site "
"will implement its typical practice."
msgstr "CloudStack默认提供HTTP的访问方式。有许多的技术和网站选择使用SSL。因此，我们先抛下CloudStack所使用的HTTP，假设站点使用SSL是一个典型实践。"

# 592c0ac6d2e04347a4dd45ef76eafab0
#: ../../optional_installation.rst:83
msgid ""
"CloudStack uses Tomcat as its servlet container. For sites that would like "
"CloudStack to terminate the SSL session, Tomcat’s SSL access may be enabled."
" Tomcat SSL configuration is described at "
"http://tomcat.apache.org/tomcat-6.0-doc/ssl-howto.html."
msgstr "CloudStack使用Tomcat作为服务容器。由于CloudStack网站中断SSL会话，可能会开启Tomcatde的SSL访问。Tomcat的SSL配置描述请查阅： http://tomcat.apache.org/tomcat-6.0-doc/ssl-howto.html."

# 312c03f93afc4a98a82df1811062af96
#: ../../optional_installation.rst:90
msgid "Database Replication (Optional)"
msgstr "数据库复制（可选）"

# 7862ab06634f4e73aea90b6a69fba6d8
#: ../../optional_installation.rst:92
msgid ""
"CloudStack supports database replication from one MySQL node to another. "
"This is achieved using standard MySQL replication. You may want to do this "
"as insurance against MySQL server or storage loss. MySQL replication is "
"implemented using a master/slave model. The master is the node that the "
"Management Servers are configured to use. The slave is a standby node that "
"receives all write operations from the master and applies them to a local, "
"redundant copy of the database. The following steps are a guide to "
"implementing MySQL replication."
msgstr "CloudStack支持MySQL节点间的数据库复制。这个通过标准的MySQL复制功能来实现。你这样做可能希望防止MySQL服务器或者存储损坏。MySQL复制使用master/slave的模型。master节点是直接为管理服务器所使用。slave节点为备用，接收来自master节点的所有写操作，并将它应用于本地冗余数据库。以下是实施数据库复制的步骤。"

# b03832e56503442494767e262e0d5266
#: ../../optional_installation.rst:102
msgid ""
"Creating a replica is not a backup solution. You should develop a backup "
"procedure for the MySQL data that is distinct from replication."
msgstr "创建复制并不等同于备份策略，你需要另外开发一个有别于复制的MySQL数据的备份机制。"

# 8f01c4d5d9e849f7aa21e1fafec88427
#: ../../optional_installation.rst:105
msgid "Ensure that this is a fresh install with no data in the master."
msgstr "确保这是一个全新安装且没有数据的master数据库节点。"

# 3207c0439bb34ea28e96d4ee62ad1c2e
#: ../../optional_installation.rst:107
msgid ""
"Edit my.cnf on the master and add the following in the [mysqld] section "
"below datadir."
msgstr "编辑master数据库的my.cnf，在[mysqld]的datadir下增加如下部分。"

# 5d1dfef940ab48418d921ea6ab2104d5
#: ../../optional_installation.rst:115
msgid ""
"The server\\_id must be unique with respect to other servers. The "
"recommended way to achieve this is to give the master an ID of 1 and each "
"slave a sequential number greater than 1, so that the servers are numbered "
"1, 2, 3, etc."
msgstr "考虑到其他的服务器，服务器id必须是唯一的。推荐的方式是将master的ID设置为1，后续的每个slave节点序号大于1，使得所有服务器编号如：1，2，3等。"

# 3b36dc410ff54ea89e014b950f48408a
#: ../../optional_installation.rst:120
msgid "Restart the MySQL service. On RHEL/CentOS systems, use:"
msgstr "重启MySQL服务。如果是RHEL/CentOS系统，命令为："

# 3b34254879f64ec58d72150d828d019f
#: ../../optional_installation.rst:126
msgid "On Debian/Ubuntu systems, use:"
msgstr "如果是Debian/Ubuntu系统，命令为："

# 37951ede2d454f428070c346ebef21fd
#: ../../optional_installation.rst:132
msgid ""
"Create a replication account on the master and give it privileges. We will "
"use the \"cloud-repl\" user with the password \"password\". This assumes "
"that master and slave run on the 172.16.1.0/24 network."
msgstr "在master上创建一个用于复制的账户，并赋予权限。我们创建用户\"cloud-repl\"，密码为\"password\"。假设master和slave都运行在172.16.1.0/24网段。"

# f487c49c63214050912b21eef50fb648
#: ../../optional_installation.rst:144
msgid "Leave the current MySQL session running."
msgstr "离开当前正在运行的MySQL会话。"

# 6c09640cbc0342ddb5e30bbdc8e8721e
#: ../../optional_installation.rst:146
msgid "In a new shell start a second MySQL session."
msgstr "在新的shell中打开第二个MySQL会话。"

# 19bf58dc11664a8fbec99bb36a1c660f
#: ../../optional_installation.rst:148
msgid "Retrieve the current position of the database."
msgstr "检索当前数据库的位置点。"

# dc3fedfd512549e9bf54e76e6af57e8a
#: ../../optional_installation.rst:160
msgid "Note the file and the position that are returned by your instance."
msgstr "注意你数据库实例所返回的文件及位置点。"

# 8043382dff184852bc33635d21cfd8da
#: ../../optional_installation.rst:162
msgid "Exit from this session."
msgstr "退出该会话。"

# 3448c24480a343129c3e323c59e1d52f
#: ../../optional_installation.rst:164
msgid ""
"Complete the master setup. Returning to your first session on the master, "
"release the locks and exit MySQL."
msgstr "完成master安装。返回到master的第一个会话，取消锁定并退出MySQL。"

# b756f3987b8345d78bb98a1da0cdf5f0
#: ../../optional_installation.rst:171
msgid ""
"Install and configure the slave. On the slave server, run the following "
"commands."
msgstr "安装并配置slave节点。在slave服务器上，运行如下命令。"

# ce5052106169447d867315b4ab5acf5c
#: ../../optional_installation.rst:179
msgid ""
"Edit my.cnf and add the following lines in the [mysqld] section below "
"datadir."
msgstr "编辑my.cnf，在[mysqld]的datadir下增加如下部分。"

# 32a595c11f6f493f8d97ee7f2eaca7ca
#: ../../optional_installation.rst:188
msgid "Restart MySQL. Use \"mysqld\" on RHEL/CentOS systems:"
msgstr "重启MySQL。对于RHEL/CentOS系统，使用\"mysqld\""

# 86098df7874048268b21ceab1348fc66
#: ../../optional_installation.rst:194
msgid "On Ubuntu/Debian systems use \"mysql.\""
msgstr "对于Ubuntu/Debian系统，使用\"mysql.\""

# cc3fe860c3244bfaabe3d4c4317c7ac8
#: ../../optional_installation.rst:200
msgid ""
"Instruct the slave to connect to and replicate from the master. Replace the "
"IP address, password, log file, and position with the values you have used "
"in the previous steps."
msgstr "引导slave连接master并进行复制。使用上面步骤中得到数据来替换IP地址，密码，日志文件，以及位置点。"

# 9a9640cbcab74267a00aefe5b61ca112
#: ../../optional_installation.rst:213
msgid "Then start replication on the slave."
msgstr "在slave上启动复制功能。"

# a561331155b44e14a5a9540ccfaded76
#: ../../optional_installation.rst:219
msgid ""
"Optionally, open port 3306 on the slave as was done on the master earlier."
msgstr "在slave上可能需要开启3306端口，就像之前在master上所做的一样。"

# efdf8223dd9a43a8827dd97444acf8e3
#: ../../optional_installation.rst:222
msgid ""
"This is not required for replication to work. But if you choose not to do "
"this, you will need to do it when failover to the replica occurs."
msgstr "这对复制来说不是必须的。但如果没有做，当需要进行数据库切换时，你仍然需要去做。"

# d4acbba0ba9b47bdb60497c2f80cf6cc
#: ../../optional_installation.rst:228
msgid "Failover"
msgstr "故障切换"

# 4937feeba9e047e3b9665410e5765ce4
#: ../../optional_installation.rst:230
msgid ""
"This will provide for a replicated database that can be used to implement "
"manual failover for the Management Servers. CloudStack failover from one "
"MySQL instance to another is performed by the administrator. In the event of"
" a database failure you should:"
msgstr "这将为管理服务器提供一个复制的数据库，用于实现手动故障切换。管理员将CloudStack从一个故障MySQL实例切换到另一个。当数据库失效发生时，你应该："

# e136a63f11d74984968bb1c32c84670f
#: ../../optional_installation.rst:235
msgid "Stop the Management Servers (via service cloudstack-management stop)."
msgstr "停止管理服务器（通过命令：service cloudstack-management stop）"

# df74922f2b5a44b0820337aecbb8703f
#: ../../optional_installation.rst:237
msgid "Change the replica's configuration to be a master and restart it."
msgstr "将数据库的复本服务器修改为master并重启"

# 2bc5d7c5cd654d7abc5305542ac56d8d
#: ../../optional_installation.rst:239
msgid "Ensure that the replica's port 3306 is open to the Management Servers."
msgstr "确保数据库的副本服务器的3306端口开放给管理服务器。"

# cfeac26dd12942b6a98e7598f0f9b130
#: ../../optional_installation.rst:242
msgid ""
"Make a change so that the Management Server uses the new database. The "
"simplest process here is to put the IP address of the new database server "
"into each Management Server's /etc/cloudstack/management/db.properties."
msgstr "更改使得管理服务器使用这个新的数据库。最简单的操作是在管理服务器的/etc/cloudstack/management/db.properties文件中写入新的数据库IP地址。"

# b5e8464f1e5f4490bdd8efe683735901
#: ../../optional_installation.rst:247
msgid "Restart the Management Servers:"
msgstr "重启管理服务器："

# f83e0c3d61fd423a8768c362173078a1
#: ../../optional_installation.rst:255
msgid "Amazon Web Services Interface"
msgstr "Amazon Web Services 接口"

# 008a243332da45c681fc9c7358b19aae
#: ../../optional_installation.rst:258
msgid "Amazon Web Services Compatible Interface"
msgstr "Amazon Web Services 兼容接口"

# a82b49319a584d2bbb2ab85b707dd73e
#: ../../optional_installation.rst:260
msgid ""
"CloudStack can translate Amazon Web Services (AWS) API calls to native "
"CloudStack API calls so that users can continue using existing AWS-"
"compatible tools. This translation service runs as a separate web "
"application in the same tomcat server as the management server of "
"CloudStack, listening on a different port. The Amazon Web Services (AWS) "
"compatible interface provides the EC2 SOAP and Query APIs as well as the S3 "
"REST API."
msgstr "CloudStack可将AWS API调用转换为CloudStack本地调用，使得用户可以继续使用已有的AWS兼容工具。这个转换服务作为单独的web应用，就像在tomcat上的CloudStack管理服务一样，只是监听不同的端口。AWS兼容接口除了提供S3 REST API外，还提供EC2 SOAP和Query APIs。"

# 4099f5d8b5b2469097a3c637c1f56b3b
#: ../../optional_installation.rst:269
msgid ""
"This service was previously enabled by separate software called CloudBridge."
" It is now fully integrated with the CloudStack management server."
msgstr "这项服务，之前是由CloudBridge独立软件实现的。现在已经完全集成到CloudStack管理服务中。"

# ba7cd83fde90433795ad9f0983796c7d
#: ../../optional_installation.rst:273
msgid ""
"The compatible interface for the EC2 Query API and the S3 API are Work In "
"Progress. The S3 compatible API offers a way to store data on the management"
" server file system, it is not an implementation of the S3 backend."
msgstr ""

# 3d6cb62472054f53823064cd7522b0b1
#: ../../optional_installation.rst:278
msgid "Limitations"
msgstr "局限性"

# bd1989968b7a48d08d2c3e9cbe00b826
#: ../../optional_installation.rst:280
msgid "Supported only in zones that use basic networking."
msgstr "只支持使用基本网络的zone。"

# af22d4d3ba014e95bbcc09a2a5f63ded
#: ../../optional_installation.rst:282
msgid ""
"Available in fresh installations of CloudStack. Not available through "
"upgrade of previous versions."
msgstr "仅对全新安装的CloudStack可用。通过旧版本升级的不可用。"

# 89189121ce884387b3055b803759c936
#: ../../optional_installation.rst:285
msgid ""
"Features such as Elastic IP (EIP) and Elastic Load Balancing (ELB) are only "
"available in an infrastructure with a Citrix NetScaler device. Users "
"accessing a Zone with a NetScaler device will need to use a NetScaler-"
"enabled network offering (DefaultSharedNetscalerEIP and ELBNetworkOffering)."
msgstr "如弹性IP(EIP)和弹性负载均衡(ELB)这些特性，仅对有Citrix NetScaler设备的架构可用。用户接入有NetScaler设备的zone时，需要使用NetScaler-enabled网络方案（DefaultSharedNetscalerEIP和ELBNetworkOffering）。"

# 4063d813433749b7a6f88f762f812757
#: ../../optional_installation.rst:293
msgid "Supported API Version"
msgstr "支持的API版本"

# 0c8d9ebd1d4249df82a11f029752c2fe
#: ../../optional_installation.rst:295
msgid ""
"The EC2 interface complies with Amazon's WDSL version dated November 15, "
"2010, available at `http://ec2.amazonaws.com/doc/2010-11-15/ "
"<http://ec2.amazonaws.com/doc/2010-11-15/>`_."
msgstr "遵守亚马逊WDSL版本的EC2接口将于2010-11-15过期。可在 `http://ec2.amazonaws.com/doc/2010-11-15/ <http://ec2.amazonaws.com/doc/2010-11-15/>`获取。"

# 06a91ca4b45c4bcd8f0dffb5a713eee1
#: ../../optional_installation.rst:299
msgid ""
"The interface is compatible with the EC2 command-line tools *EC2 tools v. "
"1.3.6230*, which can be downloaded at "
"`http://s3.amazonaws.com/ec2-downloads/ec2-api-tools-1.3-62308.zip "
"<http://s3.amazonaws.com/ec2-downloads/ec2-api-tools-1.3-62308.zip>`_."
msgstr "接口与EC2命令行工具*EC2 tools v.1.3.6230*是兼容的。可在 `http://s3.amazonaws.com/ec2-downloads/ec2-api-tools-1.3-62308.zip <http://s3.amazonaws.com/ec2-downloads/ec2-api-tools-1.3-62308.zip>`_."

# 345691ffdcae4dde88f8e11a0125cbf2
#: ../../optional_installation.rst:304
msgid "Work is underway to support a more recent version of the EC2 API"
msgstr "支持更新版本的EC2 API的工作正在进行"

# a79e19b1e2534aae9054a646ab2ca09e
#: ../../optional_installation.rst:308
msgid "Enabling the EC2 and S3 Compatible Interface"
msgstr "使能EC2和S3兼容接口"

# f6d3211b707447119b97c69471f54d9d
#: ../../optional_installation.rst:310
msgid ""
"The software that provides AWS API compatibility is installed along with "
"CloudStack. You must enable the services and perform some setup steps prior "
"to using it."
msgstr "提供AWS API兼容性的软件随CloudStack一起安装。在使用之前，你必须使能服务并操作一些安装步骤。"

# bce3d6459eb347829649d2c27d636958
#: ../../optional_installation.rst:314
msgid ""
"Set the global configuration parameters for each service to true. See "
"`*Setting Global Configuration Parameters* <configuration.html#setting-"
"global-configuration-parameters>`_."
msgstr "将全局配置参数中的每项服务设置为true。详看 `*Setting Global Configuration Parameters* <configuration.html#setting-global-configuration-parameters>`_."

# 0dc2fe0c2c8445b1924fc574a1c87694
#: ../../optional_installation.rst:318
msgid ""
"Create a set of CloudStack service offerings with names that match the "
"Amazon service offerings. You can do this through the CloudStack UI as "
"described in the Administration Guide."
msgstr "创建一组匹配亚马逊服务方案的名称。这个可以按照管理员操作手册在CloudStack界面上进行操作。"

# aa33d4563eec476a845286e29c8e36b0
#: ../../optional_installation.rst:323
msgid ""
"Be sure you have included the Amazon default service offering, m1.small. As "
"well as any EC2 instance types that you will use."
msgstr "除了可能使用的EC2实例类型，确保已包含亚马逊默认服务方案，m1.small。"

# 096209e388b6481291f88c61c491b459
#: ../../optional_installation.rst:326
msgid ""
"If you did not already do so when you set the configuration parameter in "
"step 1, restart the Management Server."
msgstr "如果按照步骤1设置了配置参数后，没有重启，那么重启管理服务器。"

# a77f0d9cbc2f47c4b4cc66b9e4019fee
#: ../../optional_installation.rst:333
msgid "The following sections provides details to perform these steps"
msgstr "以下内容提供了这些步骤的细节"

# a08859b425eb4de583eddfd055ab1ff4
#: ../../optional_installation.rst:337
msgid "Enabling the Services"
msgstr "开启服务"

# 272886039ce1406aaa5cd62c9d6ef1d1
#: ../../optional_installation.rst:339
msgid ""
"To enable the EC2 and S3 compatible services you need to set the "
"configuration variables *enable.ec2.api* and *enable.s3.api* to true. You do"
" not have to enable both at the same time. Enable the ones you need. This "
"can be done via the CloudStack GUI by going in *Global Settings* or via the "
"API."
msgstr "为了使能EC2和S3兼容服务，你需要将 *enable.ec2.api *和 *enable.s3.api* 的值设置为true。以使能你所需要的服务。这个可以在CloudStack的界面上的*Global Settings*或者API来实现。"

# 7dfc438f80884b509b780ac9f22a60d7
#: ../../optional_installation.rst:345
msgid ""
"The snapshot below shows you how to use the GUI to enable these services"
msgstr "下面的截图展示如何通过GUI使能这些服务。"

# 3f1255dfd7c74bbbaa364bd72050b328
#: ../../optional_installation.rst:347
msgid "|Use the GUI to set the configuration variable to true|"
msgstr "|Use the GUI to set the configuration variable to true|"

# 8039aca5d5ee48928e08b48a66702245
#: ../../optional_installation.rst:349
msgid ""
"Using the CloudStack API, the easiest is to use the so-called integration "
"port on which you can make unauthenticated calls. In Global Settings set the"
" port to 8096 and subsequently call the *updateConfiguration* method. The "
"following urls shows you how:"
msgstr "使用CloudStack API最简单的方法是使用集成接口，这个接口可以使用无验证调用。在全局设置中将这个接口设置为8096，然后调用 *updateConfiguration* 。下面的URL展示如何使用。"

# 5bbf6319aa584463b00106945d4c6402
#: ../../optional_installation.rst:359
msgid "Once you have enabled the services, restart the server."
msgstr "一旦使能这些服务，重启服务器。"

# 83493cf546644c91bdf4168470b7038b
#: ../../optional_installation.rst:363
msgid "Creating EC2 Compatible Service Offerings"
msgstr "创建EC2兼容服务方案"

# 45d0f4507650452687adcaf0021cf2ec
#: ../../optional_installation.rst:365
msgid ""
"You will also need to define compute service offerings with names compatible"
" with the `Amazon EC2 instance types <http://aws.amazon.com/ec2/instance-"
"types/>`_ API names (e.g m1.small,m1.large). This can be done via the "
"CloudStack GUI. Go under *Service Offerings* select *Compute offering* and "
"either create a new compute offering or modify an existing one, ensuring "
"that the name matches an EC2 instance type API name. The snapshot below "
"shows you how:"
msgstr "可以定义兼容 `Amazon EC2实例类型 <http://aws.amazon.com/ec2/instance-types/>` API名称的计算服务方案。(例如m1.small,m1.large)，这个可以通过CloudStack界面进行操作。在 *Service Offerings* 中选择 *Compute offering* ，创建一个新的计算方案或者修改已存在的皆可。确保名称与EC2实例类型API名称匹配。下面的截图将展示如何操作。"

# 231dd56b51ee4df98f4d20605e495f73
#: ../../optional_installation.rst:373
msgid ""
"|Use the GUI to set the name of a compute service offering to an EC2 "
"instance type API name.|"
msgstr "|Use the GUI to set the name of a compute service offering to an EC2 instance type API name.|"

# a4602805499146c2b996ff100acf74ea
#: ../../optional_installation.rst:378
msgid "Modifying the AWS API Port"
msgstr "修改AWS API端口"

# dd4eaeaa8fda437b849ad593f49f45b7
#: ../../optional_installation.rst:381
msgid ""
"(Optional) The AWS API listens for requests on port 7080. If you prefer AWS "
"API to listen on another port, you can change it as follows:"
msgstr "（可选）AWS API在端口7080监听请求。如果你希望监听另外的端口，可通过如下步骤修改："

# 7f4e4df38c7a4fc3a6fa8c6b2e2d3e64
#: ../../optional_installation.rst:384
msgid ""
"Edit the files ``/etc/cloudstack/management/server.xml``, "
"``/etc/cloudstack/management/server-nonssl.xml``, and "
"``/etc/cloudstack/management/server-ssl.xml``."
msgstr "编辑文件 ``/etc/cloudstack/management/server.xml`` , ``/etc/cloudstack/management/server-nonssl.xml`` , ``/etc/cloudstack/management/server-ssl.xml` `."

# b340ed2079834e53a63d34250cd825ca
#: ../../optional_installation.rst:388
msgid ""
"In each file, find the tag <Service name=\"Catalina7080\">. Under this tag, "
"locate <Connector executor=\"tomcatThreadPool-internal\" port=   ....<."
msgstr "在每个文件中找出<Service name=\"Catalina7080\">的标签，在这个标签下，定位到<Connector executor=\"tomcatThreadPool-internal\" port=   ....<"

# bccb37ab25b94f20811fce519e8fdc29
#: ../../optional_installation.rst:390
msgid "Change the port to whatever port you want to use, then save the files."
msgstr "将这个端口改为你想用的任何端口，并保存文件。"

# 92df4f254d294e9da84bf38af22b9a91
#: ../../optional_installation.rst:392
msgid "Restart the Management Server."
msgstr "重启管理服务器。"

# e51c7d34c3924425b10a99d64cdfe879
#: ../../optional_installation.rst:394
msgid ""
"If you re-install CloudStack, you will have to re-enable the services and if"
" need be update the port."
msgstr "如果你重装CloudStack，你需要重新使能服务并更新端口。"

# 88a6174139da4c4186ae97897056f0a3
#: ../../optional_installation.rst:399
msgid "AWS API User Setup"
msgstr "AWS API用户安装"

# 57e3c2571da94b80b822e13550aadc22
#: ../../optional_installation.rst:401
msgid ""
"In general, users need not be aware that they are using a translation "
"service provided by CloudStack. They only need to send AWS API calls to "
"CloudStack's endpoint, and it will translate the calls to the native "
"CloudStack API. Users of the Amazon EC2 compatible interface will be able to"
" keep their existing EC2 tools and scripts and use them with their "
"CloudStack deployment, by specifying the endpoint of the management server "
"and using the proper user credentials. In order to do this, each user must "
"perform the following configuration steps:"
msgstr "总的来说，用户不需要察觉CloudStack所提供的翻译服务。只需将AWS API调用发送到CloudStack端，然后被转换为CloudStack API。Amazon EC2兼容接口用户可继续使用已有的EC2工具和脚本，并通过指定管理服务器的端及合适的用户证书，将它们用于CloudStack部署。为此，用户需要进行如下步骤的操作："

# a19dd6485e8648de8c442534a81268dc
#: ../../optional_installation.rst:410
msgid "Generate user credentials."
msgstr "生成用户证书"

# 2dbe2a8f81614418bdfbc25616fdc428
#: ../../optional_installation.rst:412
msgid "Register with the service."
msgstr "向服务注册。"

# badf72cf4c6149aaaab82e77ffd82b50
#: ../../optional_installation.rst:414
msgid ""
"For convenience, set up environment variables for the EC2 SOAP command-line "
"tools."
msgstr "为了方便，设置关于EC2 SOAP命令行工具的环境变量。"

# 3b64483d04ad424ea3f6276c6f36ff1f
#: ../../optional_installation.rst:419
msgid "AWS API Command-Line Tools Setup"
msgstr "AWS API命令行工具安装"

# 8d508d5a0ad04931b410fe2c700ee584
#: ../../optional_installation.rst:421
msgid "To use the EC2 command-line tools, the user must perform these steps:"
msgstr "为了使用EC2命令行工具，用户需要操作以下步骤："

# b99567ebf9e347608ef9aebcd5b73e11
#: ../../optional_installation.rst:423
msgid ""
"Be sure you have the right version of EC2 Tools. The supported version is "
"available at `http://s3.amazonaws.com/ec2-downloads/ec2-api-"
"tools-1.3-62308.zip <http://s3.amazonaws.com/ec2-downloads/ec2-api-"
"tools-1.3-62308.zip>`_."
msgstr "确定你具有正确版本的EC2工具。所支持的版本可以在 `http://s3.amazonaws.com/ec2-downloads/ec2-api-tools-1.3-62308.zip <http://s3.amazonaws.com/ec2-downloads/ec2-api-tools-1.3-62308.zip>`_获取。"

# 6dbc6273aacd474d853e027aedae2cb0
#: ../../optional_installation.rst:427
msgid ""
"Set up the EC2 environment variables. This can be done every time you use "
"the service or you can set them up in the proper shell profile. Replace the "
"endpoint (i.e EC2\\_URL) with the proper address of your CloudStack "
"management server and port. In a bash shell do the following."
msgstr "设置EC2环境变量。可在每次使用服务时设置或者写入合适的shell profile文件中。将端（如EC2\\_URL）替换为合适的CloudStack管理服务器地址和端口。可在bash文件中做如下操作。"

# eb3c3fbe05b346ecb25287a99bbb24e0
#: ../../optional_installation.rst:442
msgid "Using Timeouts to Ensure AWS API Command Completion"
msgstr "使用超时设定确保AWS API命令完成"

# 12f582bc55294c8babfc63927d334cda
#: ../../optional_installation.rst:444
msgid ""
"The Amazon EC2 command-line tools have a default connection timeout. When "
"used with CloudStack, a longer timeout might be needed for some commands. If"
" you find that commands are not completing due to timeouts, you can specify "
"a custom timeouts. You can add the following optional command-line "
"parameters to any CloudStack-supported EC2 command:"
msgstr "Amazon EC2命令行工具有默认的连接超时。在CloudStack中使用时，某些命令可能需要更长的超时。如果你发现命令在超时的时间内未完成，你可以指定用户定制超时。你可以将下面的可选命令行参数添加到任何支持CloudStack的EC2命令。"

# c844003dee644c4f84e195c83fcf9c54
#: ../../optional_installation.rst:450
msgid "Specifies a connection timeout (in seconds)"
msgstr "指定连接超时（秒）"

# 02f0dce26c234519b8a54daa305acdd9
#: ../../optional_installation.rst:456
msgid "Specifies a request timeout (in seconds)"
msgstr "指定请求超时（秒）"

# 824f8a4bf59c42e8af3125231422fb72
#: ../../optional_installation.rst:462
msgid "Example:"
msgstr "例如："

# 402a686dcd0c4432b11580f6044c89fb
#: ../../optional_installation.rst:469
msgid "The timeouts optional arguments are not specific to CloudStack."
msgstr "CloudStack中的超时可选参数并非特定"

# b0e9ee13c44541ce8507ebc579484bf9
#: ../../optional_installation.rst:473
msgid "Supported AWS API Calls"
msgstr "支持AWS API调用"

# 8795d7b0a5a84d7d9c5c6c7d9457fa31
#: ../../optional_installation.rst:475
msgid ""
"The following Amazon EC2 commands are supported by CloudStack when the AWS "
"API compatible interface is enabled. For a few commands, there are "
"differences between the CloudStack and Amazon EC2 versions, and these "
"differences are noted. The underlying SOAP call for each command is also "
"given, for those who have built tools using those calls."
msgstr "AWS API接口被使能后，CloudStack可支持下面的Amazon EC2命令。对于少数命令，CloudStack与Amazon EC2版本间有一些差异，差异已被标识。对于使用SOAP调用建立工具的用户，与之相关的命令也已给出。"

# 02d07033ab224197b16e0e3416784ad8
#: ../../optional_installation.rst:481
msgid "Table 1. Elastic IP API mapping"
msgstr "表 1.弹性IP API对应表"

# e6d8f396041142b2893f507bc4dcbdff
# 1241bfdc842c4717953802b0343a7291
# 140c555e4743444ea4c85e764c7cf200
# b98e30783b7b49e49f7dfd0bf4770bdd
# 8c84cf9210be42098217140c926d9e4a
# a09d7172c4ae407bb590e916d8c4583c
# 016288e54f0746638338d5e4c36ae2d1
# 6d407b5c8ce4411ab3ca03fe1dfb3f73
# 58581d2ced5a498f8d9b64e134879fdb
# 1637dec2b0694af187c5a578dbb36e2f
# d6d86c36942a4fe3a9719c3bc53d9733
#: ../../optional_installation.rst:484 ../../optional_installation.rst:502
#: ../../optional_installation.rst:512 ../../optional_installation.rst:528
#: ../../optional_installation.rst:542 ../../optional_installation.rst:562
#: ../../optional_installation.rst:572 ../../optional_installation.rst:588
#: ../../optional_installation.rst:598 ../../optional_installation.rst:616
#: ../../optional_installation.rst:630
msgid "EC2 command"
msgstr "EC2命令"

# f329b710ee004161aac04e003d4959e7
# 3e2771dd49b84cac9a0456674bf6122a
# f34bafa2d5654005a150adfe0c7b5a79
# eda190902fda413bb85d43274f6e2698
# 805e6d29c03d44f18162de41e6340a9b
# cdf70240f9214f8bbb9126245821d4d7
# d5c143a174a7449e9fe5effe961a58c1
# 288ec94c5e4c4da09b6ec91d77ff7068
# 5400f9aed9dd4a5b83540eee1ec381a1
# b25d524012d74bfb958f904b19d4420b
# ea762702b2c9432b80571e0877d76f13
#: ../../optional_installation.rst:484 ../../optional_installation.rst:502
#: ../../optional_installation.rst:512 ../../optional_installation.rst:528
#: ../../optional_installation.rst:542 ../../optional_installation.rst:562
#: ../../optional_installation.rst:572 ../../optional_installation.rst:588
#: ../../optional_installation.rst:598 ../../optional_installation.rst:616
#: ../../optional_installation.rst:630
msgid "SOAP call"
msgstr "SOAP调用"

# f99e71d5f94c43b08513a8b56330f4f6
# 31ac1fa35a2c4abea464bcafc4fc181d
# 4ff71078fae04f59ab528c8884e872b3
# 12f8a717b46d4c6b97790eb810851aec
# 5483f26fc9de4d429006a340fb2c2e3b
# 487160d7dd2e45e784307da387c69f4b
# 02684a5cd9ea43f6b9306eca1bdff457
# b498a15517fb40569a500034444bd875
# 26f9780627c14d46a9c2da606992d101
# 4309dd0aa08d4453a2676af2b2baf8ea
# d0cf4d9b46e04a2093aaa063d28b3944
#: ../../optional_installation.rst:484 ../../optional_installation.rst:502
#: ../../optional_installation.rst:512 ../../optional_installation.rst:528
#: ../../optional_installation.rst:542 ../../optional_installation.rst:562
#: ../../optional_installation.rst:572 ../../optional_installation.rst:588
#: ../../optional_installation.rst:598 ../../optional_installation.rst:616
#: ../../optional_installation.rst:630
msgid "CloudStack API call"
msgstr "CloudStack API调用"

# 871494b532d14db482bf30a6ee1e728b
#: ../../optional_installation.rst:486
msgid "ec2-allocate-address"
msgstr "ec2-allocate-address"

# a2b89f3a70cb42d1aefe00dff62df484
#: ../../optional_installation.rst:486
msgid "AllocateAddress"
msgstr "AllocateAddress"

# b2a6cef1e5f64c7391495daee341c687
#: ../../optional_installation.rst:486
msgid "associateIpAddress"
msgstr "associateIpAddress"

# 57f93d082fb843a0bc0e05a317ca1c46
#: ../../optional_installation.rst:488
msgid "ec2-associate-address"
msgstr "ec2-associate-address"

# 0e3db736706747f783673f0e1bf54a9c
#: ../../optional_installation.rst:488
msgid "AssociateAddress"
msgstr "AssociateAddress"

# e1f6f588aaab43b8972851cde4f886be
#: ../../optional_installation.rst:488
msgid "enableStaticNat"
msgstr "enableStaticNat"

# 480cffbfdaf942dea2c51f1a89ad8f11
#: ../../optional_installation.rst:490
msgid "ec2-describe-addresses"
msgstr "ec2-describe-addresses"

# 06d41125c2ba4b32a531c4153a1d60ee
#: ../../optional_installation.rst:490
msgid "DescribeAddresses"
msgstr "DescribeAddresses"

# 489c67ac13ab44d6860865e68e4f22a1
#: ../../optional_installation.rst:490
msgid "listPublicIpAddresses"
msgstr "listPublicIpAddresses"

# 99f32f9d8ed945cda5d6dabb94b90123
#: ../../optional_installation.rst:492
msgid "ec2-diassociate-address"
msgstr "ec2-diassociate-address"

# d3412e0e645f4dc48a2d49b2cc7cc110
#: ../../optional_installation.rst:492
msgid "DisassociateAddress"
msgstr "DisassociateAddress"

# 76ba5d2d843247f0b9d520075b1180c4
#: ../../optional_installation.rst:492
msgid "disableStaticNat"
msgstr "disableStaticNat"

# 9dd57597d99147a99d7a6a1ba653ee54
#: ../../optional_installation.rst:494
msgid "ec2-release-address"
msgstr "ec2-release-address"

# a821f696dcca41e69caf9ed34dd5fe08
#: ../../optional_installation.rst:494
msgid "ReleaseAddress"
msgstr "ReleaseAddress"

# 9dc55b45ecfc4df6870608a6e45e06cb
#: ../../optional_installation.rst:494
msgid "disassociateIpAddress"
msgstr "disassociateIpAddress"

# 4db130ee1b9b47e0901be48dcf4c8112
#: ../../optional_installation.rst:499
msgid "Table 2. Availability Zone API mapping"
msgstr "表 2.可用Zone API对应表"

# c5d48090cfa34e38bf20cfb233425898
#: ../../optional_installation.rst:504
msgid "ec2-describe-availability-zones"
msgstr "ec2-describe-availability-zones"

# f86cd21880794cb6b0a7e5b82474220e
#: ../../optional_installation.rst:504
msgid "DescribeAvailabilityZones"
msgstr "DescribeAvailabilityZones"

# ccf5d831cb5048d28034c308da6a97d0
#: ../../optional_installation.rst:504
msgid "listZones"
msgstr "listZones"

# 638f0f43aae0473bae7eafa0d0058383
#: ../../optional_installation.rst:509
msgid "Table 3. Images API mapping"
msgstr "表 3.镜像API对应表"

# 508b851331d0421dbe112662c609e072
#: ../../optional_installation.rst:514
msgid "ec2-create-image"
msgstr "ec2-create-image"

# c4bb3a1d4dce43febc5d85e29a2f071e
#: ../../optional_installation.rst:514
msgid "CreateImage"
msgstr "CreateImage"

# df1c02038aff4e239a1a05490cabaa2b
#: ../../optional_installation.rst:514
msgid "createTemplate"
msgstr "createTemplate"

# eea3a24b84074b7bab9177b0f213f89a
#: ../../optional_installation.rst:516
msgid "ec2-deregister"
msgstr "ec2-deregister"

# 92dc634143e142c2a068ca963ce3c02a
#: ../../optional_installation.rst:516
msgid "DeregisterImage"
msgstr "DeregisterImage"

# eaacea2a72884286b0c663b9e8f0ba20
#: ../../optional_installation.rst:516
msgid "DeleteTemplate"
msgstr "DeleteTemplate"

# a0153e8b6a0e4465ae12d78be847d550
#: ../../optional_installation.rst:518
msgid "ec2-describe-images"
msgstr "ec2-describe-images"

# bf82b734bc3f49a3860327460324906e
#: ../../optional_installation.rst:518
msgid "DescribeImages"
msgstr "DescribeImages"

# df9b8d3e1bc649759cf66ddab8ec4f9a
#: ../../optional_installation.rst:518
msgid "listTemplates"
msgstr "listTemplates"

# af125d1fd7984bf7b33a61009f9f053a
#: ../../optional_installation.rst:520
msgid "ec2-register"
msgstr "ec2-register"

# 08b7fb7fa77b4fe990717d8c4781a071
#: ../../optional_installation.rst:520
msgid "RegisterImage"
msgstr "RegisterImage"

# 15a7a3101cae420f9a177d36e8a49755
#: ../../optional_installation.rst:520
msgid "registerTemplate"
msgstr "registerTemplate"

# 95f8126f5bde40e7a03ffe5b31cf0d0a
#: ../../optional_installation.rst:525
msgid "Table 4. Image Attributes API mapping"
msgstr "表 4.镜像属性API对应表"

# 61ba87df119f43d1ab6e755b2062c70d
#: ../../optional_installation.rst:530
msgid "ec2-describe-image-attribute"
msgstr "ec2-describe-image-attribute"

# 626ce97b2fc84dad9717f1b9f026d026
#: ../../optional_installation.rst:530
msgid "DescribeImageAttribute"
msgstr "DescribeImageAttribute"

# 47efdf23036f4569aebc625fd98610c9
#: ../../optional_installation.rst:530
msgid "listTemplatePermissions"
msgstr "listTemplatePermissions"

# 5b76481a1e664c7a80ad64ebc0f2f6c8
#: ../../optional_installation.rst:532
msgid "ec2-modify-image-attribute"
msgstr "ec2-modify-image-attribute"

# c43e186a96384512bd1de4080e7c3c3e
#: ../../optional_installation.rst:532
msgid "ModifyImageAttribute"
msgstr "ModifyImageAttribute"

# 6772c414652f430385bbd58d7f0330d3
# 2e19a602fa3a416786d47b835140a477
#: ../../optional_installation.rst:532 ../../optional_installation.rst:534
msgid "updateTemplatePermissions"
msgstr "updateTemplatePermissions"

# bb056d700ca443ea8ac3c41a96c9ca93
#: ../../optional_installation.rst:534
msgid "ec2-reset-image-attribute"
msgstr "ec2-reset-image-attribute"

# 1c5e811d7b4f4b0b97c8794475b0dfe2
#: ../../optional_installation.rst:534
msgid "ResetImageAttribute"
msgstr "ResetImageAttribute"

# 5e99e23dd1d74fdea2908ff0c784644c
#: ../../optional_installation.rst:539
msgid "Table 5. Instances API mapping"
msgstr "表 5.实例API对应表"

# 94131fa6fee041b9bb87ed41c1740015
#: ../../optional_installation.rst:544
msgid "ec2-describe-instances"
msgstr "ec2-describe-instances"

# bc77fd6401e34b03808bae2a03dce722
#: ../../optional_installation.rst:544
msgid "DescribeInstances"
msgstr "DescribeInstances"

# ddd839a8bffb4e9f959c84f328993206
# 80dab2b652cc4451b7dce841ea4b0c5e
#: ../../optional_installation.rst:544 ../../optional_installation.rst:564
msgid "listVirtualMachines"
msgstr "listVirtualMachines"

# f6bbd228de76472786cde350a52afbb0
#: ../../optional_installation.rst:546
msgid "ec2-run-instances"
msgstr "ec2-run-instances"

# d8f04cea46714aaea1e22767c6045ce1
#: ../../optional_installation.rst:546
msgid "RunInstances"
msgstr "RunInstances"

# 16bf652c09f14df3bf1f5a28d0be3085
#: ../../optional_installation.rst:546
msgid "deployVirtualMachine"
msgstr "deployVirtualMachine"

# 73c83571850b4fedb95bfce13056d186
#: ../../optional_installation.rst:548
msgid "ec2-reboot-instances"
msgstr "ec2-reboot-instances"

# 3f34ad1daf384d3ba3da8b9ff3750ca0
#: ../../optional_installation.rst:548
msgid "RebootInstances"
msgstr "RebootInstances"

# 745cf110441b4dd3b97b9c861365acb2
#: ../../optional_installation.rst:548
msgid "rebootVirtualMachine"
msgstr "rebootVirtualMachine"

# 5e8a67083eb74e249170d88c845fa736
#: ../../optional_installation.rst:550
msgid "ec2-start-instances"
msgstr "ec2-start-instances"

# f2001b78bf654274b213a674f8432d85
#: ../../optional_installation.rst:550
msgid "StartInstances"
msgstr "StartInstances"

# be06c051916b4c919ed831ab7627d632
#: ../../optional_installation.rst:550
msgid "startVirtualMachine"
msgstr "startVirtualMachine"

# db6d6153348c4b4f9c934ad1b4cef7e1
#: ../../optional_installation.rst:552
msgid "ec2-stop-instances"
msgstr "ec2-stop-instances"

# 0936209ce89d4a7d80fefed7e7e68bbb
#: ../../optional_installation.rst:552
msgid "StopInstances"
msgstr "StopInstances"

# aed253e923104237b8f072cb7149f18b
#: ../../optional_installation.rst:552
msgid "stopVirtualMachine"
msgstr "stopVirtualMachine"

# df41eecc274047d7b48459b161966294
#: ../../optional_installation.rst:554
msgid "ec2-terminate-instances"
msgstr "ec2-terminate-instances"

# 11abb0a8eda24cf1928e7100664bd7ea
#: ../../optional_installation.rst:554
msgid "TerminateInstances"
msgstr "TerminateInstances"

# 8036634c384c48038d0abdc470ffcc4e
#: ../../optional_installation.rst:554
msgid "destroyVirtualMachine"
msgstr "destroyVirtualMachine"

# 80edc0db597c4994ac9e79c8b81cc8b5
#: ../../optional_installation.rst:559
msgid "Table 6. Instance Attributes Mapping"
msgstr "表 6 实例属性对应表"

# 0f4f20fc51ce489ab1980676caf53257
#: ../../optional_installation.rst:564
msgid "ec2-describe-instance-attribute"
msgstr "ec2-describe-instance-attribute"

# 4884ab07d7a941abbcf65d35f6956ef7
#: ../../optional_installation.rst:564
msgid "DescribeInstanceAttribute"
msgstr "DescribeInstanceAttribute"

# 3535a243b6944759833817d5812fe907
#: ../../optional_installation.rst:569
msgid "Table 7. Keys Pairs Mapping"
msgstr "表 7 密钥对应表"

# a3c003668c19497192a168826e6dd752
#: ../../optional_installation.rst:574
msgid "ec2-add-keypair"
msgstr "ec2-add-keypair"

# fc757057d53e4355b3e39ebde3670cc4
#: ../../optional_installation.rst:574
msgid "CreateKeyPair"
msgstr "CreateKeyPair"

# 8b21961e21324bfbb5ca8be24c8a33eb
#: ../../optional_installation.rst:574
msgid "createSSHKeyPair"
msgstr "createSSHKeyPair"

# deb02c5e8676453291bbd521ff3bc979
#: ../../optional_installation.rst:576
msgid "ec2-delete-keypair"
msgstr "ec2-delete-keypair"

# 4580d729e28940778561e6b64aec68b2
#: ../../optional_installation.rst:576
msgid "DeleteKeyPair"
msgstr "DeleteKeyPair"

# c8fefc1f8ac047f1b825d7069618e3f4
#: ../../optional_installation.rst:576
msgid "deleteSSHKeyPair"
msgstr "deleteSSHKeyPair"

# fd10ca522a284a17ab0f0772e7eff22c
#: ../../optional_installation.rst:578
msgid "ec2-describe-keypairs"
msgstr "ec2-describe-keypairs"

# d64506ecf5b94b0fb34a54eb1a533ee9
#: ../../optional_installation.rst:578
msgid "DescribeKeyPairs"
msgstr "DescribeKeyPairs"

# 303415d20d3e4881a6441bd09ee7383e
#: ../../optional_installation.rst:578
msgid "listSSHKeyPairs"
msgstr "listSSHKeyPairs"

# daa6bca4cda94bb987b8771303321aa0
#: ../../optional_installation.rst:580
msgid "ec2-import-keypair"
msgstr "ec2-import-keypair"

# fcf840900bb646acb715f411c19c1a8c
#: ../../optional_installation.rst:580
msgid "ImportKeyPair"
msgstr "ImportKeyPair"

# cf7556bc11ad48819c9bc515411fdced
#: ../../optional_installation.rst:580
msgid "registerSSHKeyPair"
msgstr "registerSSHKeyPair"

# 27703e9dc9244cd0ad627c2fda749c65
#: ../../optional_installation.rst:585
msgid "Table 8. Passwords API Mapping"
msgstr "表 8.密码API对应表"

# 3c333b4280534856a4650d0768a87fe9
#: ../../optional_installation.rst:590
msgid "ec2-get-password"
msgstr "ec2-get-password"

# 69df9745e16f4025994bc4a4e7dd8d14
#: ../../optional_installation.rst:590
msgid "GetPasswordData"
msgstr "GetPasswordData"

# f1023d3b15164fa781914bc2798f4049
#: ../../optional_installation.rst:590
msgid "getVMPassword"
msgstr "getVMPassword"

# 42d8a55a4cdd4166903ac3f4d0893d34
#: ../../optional_installation.rst:595
msgid "Table 9. Security Groups API Mapping"
msgstr "表 9.安全组API对应表"

# 9f4ba75822cb44d8a563b7e19dd084cf
#: ../../optional_installation.rst:600
msgid "ec2-authorize"
msgstr "ec2-authorize"

# c9b993da1c7344a98757f409d8c43863
#: ../../optional_installation.rst:600
msgid "AuthorizeSecurityGroupIngress"
msgstr "AuthorizeSecurityGroupIngress"

# 6700b8b10b56416587800a56a46a321f
#: ../../optional_installation.rst:600
msgid "authorizeSecurityGroupIngress"
msgstr "authorizeSecurityGroupIngress"

# 08a42b691fe745c4886feccc73ce1adf
#: ../../optional_installation.rst:602
msgid "ec2-add-group"
msgstr "ec2-add-group"

# 7264f4cf327e4f1ea917878644005831
#: ../../optional_installation.rst:602
msgid "CreateSecurityGroup"
msgstr "CreateSecurityGroup"

# 91777fbf4341415a9685b03a9640482f
#: ../../optional_installation.rst:602
msgid "createSecurityGroup"
msgstr "createSecurityGroup"

# c3cf61e1d10d4f5989bfd2692699ea35
#: ../../optional_installation.rst:604
msgid "ec2-delete-group"
msgstr "ec2-delete-group"

# efab4d6e1d1244859fe7cbe9c4f3886e
#: ../../optional_installation.rst:604
msgid "DeleteSecurityGroup"
msgstr "DeleteSecurityGroup"

# 90d9bc2bd0bc4e01a3c09d3611032dbc
#: ../../optional_installation.rst:604
msgid "deleteSecurityGroup"
msgstr "deleteSecurityGroup"

# c72ab39125e241e18dd69018eb4943d2
#: ../../optional_installation.rst:606
msgid "ec2-describe-group"
msgstr "ec2-describe-group"

# ebf978cf9ead4b63b1e55ca99411cde8
#: ../../optional_installation.rst:606
msgid "DescribeSecurityGroups"
msgstr "DescribeSecurityGroups"

# ff1b0d61071b4256bbb3c44a6e3db98f
#: ../../optional_installation.rst:606
msgid "listSecurityGroups"
msgstr "listSecurityGroups"

# c0c1d7836b1247c98a6edd27afe1f758
#: ../../optional_installation.rst:608
msgid "ec2-revoke"
msgstr "ec2-revoke"

# e25205aeab6a4a4cb7aed5e9d3cef347
#: ../../optional_installation.rst:608
msgid "RevokeSecurityGroupIngress"
msgstr "RevokeSecurityGroupIngress"

# 5e02eadf7e81443da07167e7ce261298
#: ../../optional_installation.rst:608
msgid "revokeSecurityGroupIngress"
msgstr "revokeSecurityGroupIngress"

# fa94f34dde294a2682b384cbe8ecd23c
#: ../../optional_installation.rst:613
msgid "Table 10. Snapshots API Mapping"
msgstr "表 10.快照API对应表"

# ee680af94d4946678427401c45778d24
#: ../../optional_installation.rst:618
msgid "ec2-create-snapshot"
msgstr "ec2-create-snapshot"

# 79c2f04343b14b819176d6f4dea40c55
#: ../../optional_installation.rst:618
msgid "CreateSnapshot"
msgstr "CreateSnapshot"

# 94845f5ef1f54d3c968868fcf99ba1f8
#: ../../optional_installation.rst:618
msgid "createSnapshot"
msgstr "createSnapshot"

# 4987b9a0b58f41bab2d4c04e9e4e5a6e
#: ../../optional_installation.rst:620
msgid "ec2-delete-snapshot"
msgstr "ec2-delete-snapshot"

# ee365f5503714848886b5594642d29bb
#: ../../optional_installation.rst:620
msgid "DeleteSnapshot"
msgstr "DeleteSnapshot"

# b71dca67624b46f18e4aeba5daf8d3a2
#: ../../optional_installation.rst:620
msgid "deleteSnapshot"
msgstr "deleteSnapshot"

# 59cca02c7be644da8322ba049074d97f
#: ../../optional_installation.rst:622
msgid "ec2-describe-snapshots"
msgstr "ec2-describe-snapshots"

# 0aab43a7f50d4a74bdb336efb5f532f3
#: ../../optional_installation.rst:622
msgid "DescribeSnapshots"
msgstr "DescribeSnapshots"

# 36579270e4464f01a3448e680a5a85e2
#: ../../optional_installation.rst:622
msgid "listSnapshots"
msgstr "listSnapshots"

# 5e706e7dce774791a61ca1100cb16fde
#: ../../optional_installation.rst:627
msgid "Table 11. Volumes API Mapping"
msgstr "表 11.卷API对应表"

# 97db47b0a0ba4160850802f8a1f1bb90
#: ../../optional_installation.rst:632
msgid "ec2-attach-volume"
msgstr "ec2-attach-volume"

# 3b10700084ac4bf3b26665a5d3ebf318
#: ../../optional_installation.rst:632
msgid "AttachVolume"
msgstr "AttachVolume"

# 5c9f9723721245c8b718bd54cbaece22
#: ../../optional_installation.rst:632
msgid "attachVolume"
msgstr "attachVolume"

# 72e155b316de4a22a0dc04db2446a000
#: ../../optional_installation.rst:634
msgid "ec2-create-volume"
msgstr "ec2-create-volume"

# 9104debce3a241239dd215d4e3f2d3be
#: ../../optional_installation.rst:634
msgid "CreateVolume"
msgstr "CreateVolume"

# 556262b0cecd47f2911e5c1c52ce4cd1
#: ../../optional_installation.rst:634
msgid "createVolume"
msgstr "createVolume"

# 74ac980aa1474328a197b3d0838ed348
#: ../../optional_installation.rst:636
msgid "ec2-delete-volume"
msgstr "ec2-delete-volume"

# 4ea664000a214abaa22eef86ff955923
#: ../../optional_installation.rst:636
msgid "DeleteVolume"
msgstr "DeleteVolume"

# 3292da55a3b246a394511a8f8690f8f8
#: ../../optional_installation.rst:636
msgid "deleteVolume"
msgstr "deleteVolume"

# deceab702d224f7abc2f807131a49f98
#: ../../optional_installation.rst:638
msgid "ec2-describe-volume"
msgstr "ec2-describe-volume"

# 0c209718005c4d14979e9242eef22116
#: ../../optional_installation.rst:638
msgid "DescribeVolume"
msgstr "DescribeVolume"

# d0d300c170964f3baef0aff758b9ab73
#: ../../optional_installation.rst:638
msgid "listVolumes"
msgstr "listVolumes"

# 504e7f75651c40049e25fccbe5fa029f
#: ../../optional_installation.rst:640
msgid "ec2-detach-volume"
msgstr "ec2-detach-volume"

# f9fe5637c3564d93b15edc5988690000
#: ../../optional_installation.rst:640
msgid "DetachVolume"
msgstr "DetachVolume"

# d2d951565edd4f31907d8b2c2f26fd6b
#: ../../optional_installation.rst:640
msgid "detachVolume"
msgstr "detachVolume"

# 126ae67bf33f461a842b80e8582ee1ad
#: ../../optional_installation.rst:647
msgid "Examples"
msgstr "示例"

# 13a09d4f957645a1bd8fc9df7c217544
#: ../../optional_installation.rst:649
msgid ""
"There are many tools available to interface with a AWS compatible API. In "
"this section we provide a few examples that users of CloudStack can build "
"upon."
msgstr "有很多工具可以提供接入AWS兼容API。本节中将提供CloudStack用户一些使用用例。"

# fccb92622df74eea927da84d007d391b
#: ../../optional_installation.rst:655
msgid "Boto Examples"
msgstr "Boto示例"

# 4831cf3fedd840a7b813bc1622eeb277
#: ../../optional_installation.rst:657
msgid ""
"Boto is one of them. It is a Python package available at "
"https://github.com/boto/boto. In this section we provide two examples of "
"Python scripts that use Boto and have been tested with the CloudStack AWS "
"API Interface."
msgstr "Boto是其中一个。Python包可以在 https://github.com/boto/boto 获取。本节中提供两个使用Boto并已被CloudStack AWS API接口测试过的Python脚本示例。"

# e785f67f1fed40108c89dcea285aebea
#: ../../optional_installation.rst:662
msgid ""
"First is an EC2 example. Replace the Access and Secret Keys with your own "
"and update the endpoint."
msgstr "第一个是EC2示例，将访问和加密密钥改成你自己的，并更新端。"

# 90ec7328d8c4425ea37b7739fccb8bdb
#: ../../optional_installation.rst:665
msgid "Example 1. An EC2 Boto example"
msgstr "示例1.EC2 Boto示例"

# 164cdb8278ff484c80d1a4d08b029bdd
#: ../../optional_installation.rst:703
msgid ""
"Second is an S3 example. The S3 interface in CloudStack is obsolete. If you "
"need an S3 interface you should look at systems like RiakCS, Ceph or "
"GlusterFS. This example is here for completeness and can be adapted to other"
" S3 endpoint."
msgstr "第二个是S3示例。S3接口在CloudStack中已被废弃。如果要使用，需要考察下RiakCS，Ceph或者GlusterFS系统。这个示例已完成并可用于其他S3端。"

# 1bb508e180ae42d19e41fd5eeefcc9f8
#: ../../optional_installation.rst:705
msgid "Example 2. An S3 Boto Example"
msgstr "示例2.S3 Boto示例"