# SOME DESCRIPTIVE TITLE.
# Copyright (C) 2014, Apache Software Foundation
# This file is distributed under the same license as the Apache CloudStack Installation Documentation package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: Apache CloudStack Installation Documentation 4\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2014-06-30 11:42+0200\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: ../../hypervisor/xenserver.rst:18
# dbca5e0c19df40c290465114f3559dec
msgid "Citrix XenServer Installation for CloudStack"
msgstr ""

#: ../../hypervisor/xenserver.rst:20
# cd47a83746ac418dbc9077979249b7da
msgid "If you want to use the Citrix XenServer hypervisor to run guest virtual machines, install XenServer 6.0 or XenServer 6.0.2 on the host(s) in your cloud. For an initial installation, follow the steps below. If you have previously installed XenServer and want to upgrade to another version, see :ref:`upgrading-xenserver-version`."
msgstr ""

#: ../../hypervisor/xenserver.rst:28
# d9ee0495584b4a8298e517da8fdc3057
msgid "System Requirements for XenServer Hosts"
msgstr ""

#: ../../hypervisor/xenserver.rst:30
# 3d5008ea44354966853d8d381ed7891a
msgid "The host must be certified as compatible with one of the following. See the Citrix Hardware Compatibility Guide: `http://hcl.xensource.com <http://hcl.xensource.com>`_"
msgstr ""

#: ../../hypervisor/xenserver.rst:34
# 8314770679cb4bc99d30a72aef396428
msgid "XenServer 5.6 SP2"
msgstr ""

#: ../../hypervisor/xenserver.rst:35
# 24946ee9574b4a6791b00328377a2b5a
msgid "XenServer 6.0"
msgstr ""

#: ../../hypervisor/xenserver.rst:36
# 7c1b9ee9639c4610aad50db7807788f8
msgid "XenServer 6.0.2"
msgstr ""

#: ../../hypervisor/xenserver.rst:37
# 9baf931e48934c4c8c54669d292e0f87
msgid "XenServer 6.1.0"
msgstr ""

#: ../../hypervisor/xenserver.rst:38
# 7ee33d4c2fd7471fafb3a3bcb6352a7e
msgid "XenServer 6.2.0"
msgstr ""

#: ../../hypervisor/xenserver.rst:40
# 5dee06ed5f2f472f9e0979ddbb241a63
msgid "You must re-install Citrix XenServer if you are going to re-use a host from a previous install."
msgstr ""

#: ../../hypervisor/xenserver.rst:43
# 80cb092fd1e84cd48850208d4ba0bbf5
msgid "Must support HVM (Intel-VT or AMD-V enabled)"
msgstr ""

#: ../../hypervisor/xenserver.rst:45
# bab4879deea84fe697e8b924ffd8fb1c
msgid "Be sure all the hotfixes provided by the hypervisor vendor are applied. Track the release of hypervisor patches through your hypervisor vendor’s support channel, and apply patches as soon as possible after they are released. CloudStack will not track or notify you of required hypervisor patches. It is essential that your hosts are completely up to date with the provided hypervisor patches. The hypervisor vendor is likely to refuse to support any system that is not up to date with patches."
msgstr ""

#: ../../hypervisor/xenserver.rst:54
# 7be511b75f274a11877a89c4e5b4442a
msgid "All hosts within a cluster must be homogeneous. The CPUs must be of the same type, count, and feature flags."
msgstr ""

#: ../../hypervisor/xenserver.rst:57
# f1598069d3724215b893587629e5a745
msgid "Must support HVM (Intel-VT or AMD-V enabled in BIOS)"
msgstr ""

#: ../../hypervisor/xenserver.rst:59
# 136e934524c54e44a1dc5daa197a36c1
msgid "64-bit x86 CPU (more cores results in better performance)"
msgstr ""

#: ../../hypervisor/xenserver.rst:61
# a06b5cab48ca4c9d86747442230f0613
msgid "Hardware virtualization support required"
msgstr ""

#: ../../hypervisor/xenserver.rst:63
# 3d9b7de9d5cb4e629ef6589132428cb0
msgid "4 GB of memory"
msgstr ""

#: ../../hypervisor/xenserver.rst:65
# e3a33fc842e74c2191c11b46d1e11d6e
msgid "36 GB of local disk"
msgstr ""

#: ../../hypervisor/xenserver.rst:67
# a7120f278e3a48f7a1957e666d4539fc
msgid "At least 1 NIC"
msgstr ""

#: ../../hypervisor/xenserver.rst:69
# a2ea178b475547d899a7a72ae1ae9761
msgid "Statically allocated IP Address"
msgstr ""

#: ../../hypervisor/xenserver.rst:71
# 829b6839c66d461b9f1692bb1a42e0a3
msgid "When you deploy CloudStack, the hypervisor host must not have any VMs already running"
msgstr ""

#: ../../hypervisor/xenserver.rst:75
# 593acf4d53964830be70c33d03648380
msgid "The lack of up-do-date hotfixes can lead to data corruption and lost VMs."
msgstr ""

#: ../../hypervisor/xenserver.rst:79
# 10efea9818be4d9fb0c4a1f8128f964e
msgid "XenServer Installation Steps"
msgstr ""

#: ../../hypervisor/xenserver.rst:81
# a2c7219af86147eeab5c37bd51222363
msgid "From `https://www.citrix.com/English/ss/downloads/ <https://www.citrix.com/English/ss/downloads/>`_, download the appropriate version of XenServer for your CloudStack version (see `\"System Requirements for XenServer Hosts\" <#system-requirements-for-xenserver-hosts>`_). Install it using the Citrix XenServer Installation Guide."
msgstr ""

#: ../../hypervisor/xenserver.rst:88
# 48628175cf1b4e66a6889e16ec013033
msgid "Older Versions of XenServer:"
msgstr ""

#: ../../hypervisor/xenserver.rst:90
# b9b29c0fa89c4656ab70adbb2a99e673
msgid "Note that you can download the most recent release of XenServer without having a Citrix account. If you wish to download older versions, you will need to create an account and look through the download archives."
msgstr ""

#: ../../hypervisor/xenserver.rst:97
# 2feb5a48073c4e2e9fe034ed56a4384d
msgid "Configure XenServer dom0 Memory"
msgstr ""

#: ../../hypervisor/xenserver.rst:99
# 07ce15cab19948cc8331905b67b44d32
msgid "Configure the XenServer dom0 settings to allocate more memory to dom0. This can enable XenServer to handle larger numbers of virtual machines. We recommend 2940 MB of RAM for XenServer dom0. For instructions on how to do this, see `http://support.citrix.com/article/CTX126531 <http://support.citrix.com/article/CTX126531>`_. The article refers to XenServer 5.6, but the same information applies to XenServer 6.0."
msgstr ""

#: ../../hypervisor/xenserver.rst:108
# 5e0c0f29a1814ea5875442853353fe5e
msgid "Username and Password"
msgstr ""

#: ../../hypervisor/xenserver.rst:110
# 6f2532ac7db843db93d53f391ae6d733
msgid "All XenServers in a cluster must have the same username and password as configured in CloudStack."
msgstr ""

#: ../../hypervisor/xenserver.rst:115
# 941b9509be3746249f736aec017baf1f
msgid "Time Synchronization"
msgstr ""

#: ../../hypervisor/xenserver.rst:117
# 0a006397adbf45fd9e71c3dc58c59a20
msgid "The host must be set to use NTP. All hosts in a pod must have the same time."
msgstr ""

#: ../../hypervisor/xenserver.rst:120
# 17ff16e49de74a14a14e94a5e972d414
msgid "Install NTP."
msgstr ""

#: ../../hypervisor/xenserver.rst:126
# 6fa27a22869648db88edf8eed39beca0
msgid "Edit the NTP configuration file to point to your NTP server."
msgstr ""

#: ../../hypervisor/xenserver.rst:132
# 0536cc30cd854673bfb3aacf080a0fc6
msgid "Add one or more server lines in this file with the names of the NTP servers you want to use. For example:"
msgstr ""

#: ../../hypervisor/xenserver.rst:142
# 8ed85f477b5d41d584b84da677111ac8
msgid "Restart the NTP client."
msgstr ""

#: ../../hypervisor/xenserver.rst:148
# ed2a3d2d19dc4679bf6153406fa541bd
msgid "Make sure NTP will start again upon reboot."
msgstr ""

#: ../../hypervisor/xenserver.rst:156
# a8af271b25314a23bb268e7969c44be2
msgid "Install CloudStack XenServer Support Package (CSP)"
msgstr ""

#: ../../hypervisor/xenserver.rst:158
# 0f869b8baf314029ba6e3249f3f31919
msgid "(Optional)"
msgstr ""

#: ../../hypervisor/xenserver.rst:160
# ef8e6914984045fe820f2142f5801c32
msgid "To enable security groups, elastic load balancing, and elastic IP on XenServer, download and install the CloudStack XenServer Support Package (CSP). After installing XenServer, perform the following additional steps on each XenServer host."
msgstr ""

#: ../../hypervisor/xenserver.rst:165
# a8fc4362d3c348039963da1e1f0b41b4
msgid "**For XenServer 6.1:**"
msgstr ""

#: ../../hypervisor/xenserver.rst:167
# e208ea52210e4bec8f264922573855e2
msgid "CSP functionality is already present in XenServer 6.1"
msgstr ""

#: ../../hypervisor/xenserver.rst:169
# 378f2f6ca35b4ce4a72152f22948e64d
msgid "Run the below command"
msgstr ""

#: ../../hypervisor/xenserver.rst:175
# 68eac0ca1dc94b6181a9a3f9e81fa493
msgid "update sysctl.conf with the following"
msgstr ""

#: ../../hypervisor/xenserver.rst:186
# 69cb332c88bf4c2c82d7ab3b9f7b2799
msgid "**For XenServer 6.0.2, 6.0, 5.6 SP2:**"
msgstr ""

#: ../../hypervisor/xenserver.rst:188
# 03b2b8ea0626476a8c58d7cc9e4db68e
msgid "Download the CSP software onto the XenServer host from one of the following links:"
msgstr ""

#: ../../hypervisor/xenserver.rst:191
# bd00d11ce1cc45b8a45cef5f93e3d5eb
msgid "For XenServer 6.0.2:"
msgstr ""

#: ../../hypervisor/xenserver.rst:193
# c7d858231a3142109c09bfcc3340078b
msgid "`http://download.cloud.com/releases/3.0.1/XS-6.0.2/xenserver-cloud-supp.tgz <http://download.cloud.com/releases/3.0.1/XS-6.0.2/xenserver-cloud-supp.tgz>`_"
msgstr ""

#: ../../hypervisor/xenserver.rst:196
# 2cbbc4bcdcdd42d0816a6b2df748a0d6
msgid "For XenServer 5.6 SP2:"
msgstr ""

#: ../../hypervisor/xenserver.rst:198
# beac106ea20e420cae0ca5acb450646b
msgid "`http://download.cloud.com/releases/2.2.0/xenserver-cloud-supp.tgz <http://download.cloud.com/releases/2.2.0/xenserver-cloud-supp.tgz>`_"
msgstr ""

#: ../../hypervisor/xenserver.rst:201
# 62cd9713906c45dc96254605c7134b11
msgid "For XenServer 6.0:"
msgstr ""

#: ../../hypervisor/xenserver.rst:203
# 998fd323b14c42149cc6633f4df39b83
msgid "`http://download.cloud.com/releases/3.0/xenserver-cloud-supp.tgz <http://download.cloud.com/releases/3.0/xenserver-cloud-supp.tgz>`_"
msgstr ""

#: ../../hypervisor/xenserver.rst:207
# 50f6122c6c5e42dbb34f5942e788bd76
msgid "Extract the file:"
msgstr ""

#: ../../hypervisor/xenserver.rst:213
#: ../../hypervisor/xenserver.rst:762
# afb359e6c1b34048bffed17d2dd50caf
# d6743dae63394bbfb8c9281a2b807b79
msgid "Run the following script:"
msgstr ""

#: ../../hypervisor/xenserver.rst:219
# acac1637a03046aa8d18547ccc4bca4b
msgid "If the XenServer host is part of a zone that uses basic networking, disable Open vSwitch (OVS):"
msgstr ""

#: ../../hypervisor/xenserver.rst:226
# 3a99c0b1de854d158eda0ad17722a6a4
msgid "Restart the host machine when prompted."
msgstr ""

#: ../../hypervisor/xenserver.rst:228
# de44be78fbb74675b797aa1c8d77d5f4
msgid "The XenServer host is now ready to be added to CloudStack."
msgstr ""

#: ../../hypervisor/xenserver.rst:232
# c7f7f8a7ee21490c87265ac50b0f82fa
msgid "Primary Storage Setup for XenServer"
msgstr ""

#: ../../hypervisor/xenserver.rst:234
# acb57e34a8e44c068d9bda2fa8784ab6
msgid "CloudStack natively supports NFS, iSCSI and local storage. If you are using one of these storage types, there is no need to create the XenServer Storage Repository (\"SR\")."
msgstr ""

#: ../../hypervisor/xenserver.rst:238
# 2d42f9931e424e16b90373f6e29342e8
msgid "If, however, you would like to use storage connected via some other technology, such as FiberChannel, you must set up the SR yourself. To do so, perform the following steps. If you have your hosts in a XenServer pool, perform the steps on the master node. If you are working with a single XenServer which is not part of a cluster, perform the steps on that XenServer."
msgstr ""

#: ../../hypervisor/xenserver.rst:245
# 56d99586bd3a4a558b7bb66ad8d45ca0
msgid "Connect FiberChannel cable to all hosts in the cluster and to the FiberChannel storage host."
msgstr ""

#: ../../hypervisor/xenserver.rst:248
# 8cd5013ce09d4df3b88eb92833ec5ec8
msgid "Rescan the SCSI bus. Either use the following command or use XenCenter to perform an HBA rescan."
msgstr ""

#: ../../hypervisor/xenserver.rst:255
# bacd282ff359414aaa9442a987f5c298
msgid "Repeat step 2 on every host."
msgstr ""

#: ../../hypervisor/xenserver.rst:257
# cd620af66c684a0e89322909e82369f4
msgid "Check to be sure you see the new SCSI disk."
msgstr ""

#: ../../hypervisor/xenserver.rst:263
# 8318145d9f754f2cba3dc478f5fac2bb
msgid "The output should look like this, although the specific file name will be different (scsi-<scsiID>):"
msgstr ""

#: ../../hypervisor/xenserver.rst:271
# 1cd57220dc34464b9985019c2bc74209
msgid "Repeat step 4 on every host."
msgstr ""

#: ../../hypervisor/xenserver.rst:273
# ab7f1cb3586b43148fc804bf9f9a6785
msgid "On the storage server, run this command to get a unique ID for the new SR."
msgstr ""

#: ../../hypervisor/xenserver.rst:280
# f68f1582ab2645ff91819eb14ea37ebf
msgid "The output should look like this, although the specific ID will be different:"
msgstr ""

#: ../../hypervisor/xenserver.rst:287
# 12c7ee94b650422dac6fa14fc9a7d775
msgid "Create the FiberChannel SR. In name-label, use the unique ID you just generated."
msgstr ""

#: ../../hypervisor/xenserver.rst:296
# e369b17cd1df40b3aa0cce96c1974a36
msgid "This command returns a unique ID for the SR, like the following example (your ID will be different):"
msgstr ""

#: ../../hypervisor/xenserver.rst:303
# 23f181a0244c4e4b980acb6e64e29d3b
msgid "To create a human-readable description for the SR, use the following command. In uuid, use the SR ID returned by the previous command. In name-description, set whatever friendly text you prefer."
msgstr ""

#: ../../hypervisor/xenserver.rst:311
# 4323c9a63c6540b4a16886f29d0a1ec5
msgid "Make note of the values you will need when you add this storage to CloudStack later (see `\"Add Primary Storage\" <configuration.html#add-primary-storage>`_). In the Add Primary Storage dialog, in Protocol, you will choose PreSetup. In SR Name-Label, you will enter the name-label you set earlier (in this example, e6849e96-86c3-4f2c-8fcc-350cc711be3d)."
msgstr ""

#: ../../hypervisor/xenserver.rst:318
# c99025edebad4540ba6b2b1d9b20ed10
msgid "(Optional) If you want to enable multipath I/O on a FiberChannel SAN, refer to the documentation provided by the SAN vendor."
msgstr ""

#: ../../hypervisor/xenserver.rst:323
# 32342d3a35f54066ade7572169b52896
msgid "iSCSI Multipath Setup for XenServer (Optional)"
msgstr ""

#: ../../hypervisor/xenserver.rst:325
# e2cf4ffa587b4372969e274849f484ee
msgid "When setting up the storage repository on a Citrix XenServer, you can enable multipath I/O, which uses redundant physical components to provide greater reliability in the connection between the server and the SAN. To enable multipathing, use a SAN solution that is supported for Citrix servers and follow the procedures in Citrix documentation. The following links provide a starting point:"
msgstr ""

#: ../../hypervisor/xenserver.rst:332
# 3849959c9c354656a9a9daafc5c5dbed
msgid "`http://support.citrix.com/article/CTX118791 <http://support.citrix.com/article/CTX118791>`_"
msgstr ""

#: ../../hypervisor/xenserver.rst:335
# 8a118ac63a7f41b8b60968177ca6b343
msgid "`http://support.citrix.com/article/CTX125403 <http://support.citrix.com/article/CTX125403>`_"
msgstr ""

#: ../../hypervisor/xenserver.rst:338
# d3f63182749e40fd86184084f5cc529b
msgid "You can also ask your SAN vendor for advice about setting up your Citrix repository for multipathing."
msgstr ""

#: ../../hypervisor/xenserver.rst:341
# 11df997f92b94313a59c0deac4d901ee
msgid "Make note of the values you will need when you add this storage to the CloudStack later (see `\"Add Primary Storage\" <configuration.html#add-primary-storage>`_). In the Add Primary Storage dialog, in Protocol, you will choose PreSetup. In SR Name-Label, you will enter the same name used to create the SR."
msgstr ""

#: ../../hypervisor/xenserver.rst:347
# de3e8779fcb54068a8684c6ae2a20a69
msgid "If you encounter difficulty, address the support team for the SAN provided by your vendor. If they are not able to solve your issue, see Contacting Support."
msgstr ""

#: ../../hypervisor/xenserver.rst:353
# b62346b563314a04b2892d0d30ebafc9
msgid "Physical Networking Setup for XenServer"
msgstr ""

#: ../../hypervisor/xenserver.rst:355
# b07a74e5a82a42dfaa85655a392fc5a1
msgid "Once XenServer has been installed, you may need to do some additional network configuration. At this point in the installation, you should have a plan for what NICs the host will have and what traffic each NIC will carry. The NICs should be cabled as necessary to implement your plan."
msgstr ""

#: ../../hypervisor/xenserver.rst:361
# e67a8a2a93f44a4182d4d83db27837bb
msgid "If you plan on using NIC bonding, the NICs on all hosts in the cluster must be cabled exactly the same. For example, if eth0 is in the private bond on one host in a cluster, then eth0 must be in the private bond on all hosts in the cluster."
msgstr ""

#: ../../hypervisor/xenserver.rst:366
# c8f114e421254029bfcc786da1e4f069
msgid "The IP address assigned for the management network interface must be static. It can be set on the host itself or obtained via static DHCP."
msgstr ""

#: ../../hypervisor/xenserver.rst:369
# 4ea2dcd3445945e494146eea4f434ebe
msgid "CloudStack configures network traffic of various types to use different NICs or bonds on the XenServer host. You can control this process and provide input to the Management Server through the use of XenServer network name labels. The name labels are placed on physical interfaces or bonds and configured in CloudStack. In some simple cases the name labels are not required."
msgstr ""

#: ../../hypervisor/xenserver.rst:376
# d4647179170b4228990c4233187a27f0
msgid "When configuring networks in a XenServer environment, network traffic labels must be properly configured to ensure that the virtual interfaces are created by CloudStack are bound to the correct physical device. The name-label of the XenServer network must match the XenServer traffic label specified while creating the CloudStack network. This is set by running the following command:"
msgstr ""

#: ../../hypervisor/xenserver.rst:389
# c06c60c71a7f4bca8a451f0b7283cfda
msgid "Configuring Public Network with a Dedicated NIC for XenServer (Optional)"
msgstr ""

#: ../../hypervisor/xenserver.rst:391
# 6e7e724c968a42a3a8b427928f42cb98
msgid "CloudStack supports the use of a second NIC (or bonded pair of NICs, described in :ref:`nic-bonding-for-xenserver`) for the public network. If bonding is not used, the public network can be on any NIC and can be on different NICs on the hosts in a cluster. For example, the public network can be on eth0 on node A and eth1 on node B. However, the XenServer name-label for the public network must be identical across all hosts. The following examples set the network label to \"cloud-public\". After the management server is installed and running you must configure it with the name of the chosen network label (e.g. \"cloud-public\"); this is discussed in `\"Management Server Installation\" <installation.html#management-server-installation>`_."
msgstr ""

#: ../../hypervisor/xenserver.rst:403
# 0a920576e6984f1684ffa04b4cedee14
msgid "If you are using two NICs bonded together to create a public network, see :ref:`nic-bonding-for-xenserver`."
msgstr ""

#: ../../hypervisor/xenserver.rst:406
# c29eb136da7f472bb9092308209f4874
msgid "If you are using a single dedicated NIC to provide public network access, follow this procedure on each new host that is added to CloudStack before adding the host."
msgstr ""

#: ../../hypervisor/xenserver.rst:410
# b6c2fcbca5784ac58cb4d766831c1feb
msgid "Run xe network-list and find the public network. This is usually attached to the NIC that is public. Once you find the network make note of its UUID. Call this <UUID-Public>."
msgstr ""

#: ../../hypervisor/xenserver.rst:414
# 7771ef8019cf477aab4f4ea6e54dc19f
msgid "Run the following command."
msgstr ""

#: ../../hypervisor/xenserver.rst:422
# 8b08df411b014c2fb09ab7803d37e385
msgid "Configuring Multiple Guest Networks for XenServer (Optional)"
msgstr ""

#: ../../hypervisor/xenserver.rst:424
# ae3d74bbbeb6474caa1aabf43ce3350d
msgid "CloudStack supports the use of multiple guest networks with the XenServer hypervisor. Each network is assigned a name-label in XenServer. For example, you might have two networks with the labels \"cloud-guest\" and \"cloud-guest2\". After the management server is installed and running, you must add the networks and use these labels so that CloudStack is aware of the networks."
msgstr ""

#: ../../hypervisor/xenserver.rst:431
# 445fbda3e6e241b49943d5a3bbae731e
msgid "Follow this procedure on each new host before adding the host to CloudStack:"
msgstr ""

#: ../../hypervisor/xenserver.rst:434
# ad021bb20dfc411ca2a0b4f6c7bb1976
msgid "Run xe network-list and find one of the guest networks. Once you find the network make note of its UUID. Call this <UUID-Guest>."
msgstr ""

#: ../../hypervisor/xenserver.rst:437
# 5c54bddb03ab41988d164862d3e8ca4a
msgid "Run the following command, substituting your own name-label and uuid values."
msgstr ""

#: ../../hypervisor/xenserver.rst:444
# 66309bb437094b1d9bbb0774c232de9a
msgid "Repeat these steps for each additional guest network, using a different name-label and uuid each time."
msgstr ""

#: ../../hypervisor/xenserver.rst:449
# 355487377b08418899e9ec50ac78ae2f
msgid "Separate Storage Network for XenServer (Optional)"
msgstr ""

#: ../../hypervisor/xenserver.rst:451
# 589c7e9b7fb048aea788093e27195cf2
msgid "You can optionally set up a separate storage network. This should be done first on the host, before implementing the bonding steps below. This can be done using one or two available NICs. With two NICs bonding may be done as above. It is the administrator's responsibility to set up a separate storage network."
msgstr ""

#: ../../hypervisor/xenserver.rst:457
# 61490e5df97948629bbb83dda64d4aa9
msgid "Give the storage network a different name-label than what will be given for other networks."
msgstr ""

#: ../../hypervisor/xenserver.rst:460
# 164d8afca329462b9c5943496322bcf0
msgid "For the separate storage network to work correctly, it must be the only interface that can ping the primary storage device's IP address. For example, if eth0 is the management network NIC, ping -I eth0 <primary storage device IP> must fail. In all deployments, secondary storage devices must be pingable from the management network NIC or bond. If a secondary storage device has been placed on the storage network, it must also be pingable via the storage network NIC or bond on the hosts as well."
msgstr ""

#: ../../hypervisor/xenserver.rst:469
# 90f24bd320174d1fac607e00a9e983f8
msgid "You can set up two separate storage networks as well. For example, if you intend to implement iSCSI multipath, dedicate two non-bonded NICs to multipath. Each of the two networks needs a unique name-label."
msgstr ""

#: ../../hypervisor/xenserver.rst:473
# 61c2f4816fdb42d5b6cc3c6d2ca18ca8
msgid "If no bonding is done, the administrator must set up and name-label the separate storage network on all hosts (masters and slaves)."
msgstr ""

#: ../../hypervisor/xenserver.rst:476
# 00dbbb5d1bcd4becb0dec5b47340f83d
msgid "Here is an example to set up eth5 to access a storage network on 172.16.0.0/24."
msgstr ""

#: ../../hypervisor/xenserver.rst:490
# 185e1a599c604803a54446ba74b35dc9
msgid "NIC Bonding for XenServer (Optional)"
msgstr ""

#: ../../hypervisor/xenserver.rst:492
# caf6aa9edc614274af0ef31881fe03ca
msgid "XenServer supports Source Level Balancing (SLB) NIC bonding. Two NICs can be bonded together to carry public, private, and guest traffic, or some combination of these. Separate storage networks are also possible. Here are some example supported configurations:"
msgstr ""

#: ../../hypervisor/xenserver.rst:497
# 44d7cdc70d4541e4b8b66e39293c57c5
msgid "2 NICs on private, 2 NICs on public, 2 NICs on storage"
msgstr ""

#: ../../hypervisor/xenserver.rst:499
# 7dbbc60ca898461991faac0752ccb9b6
msgid "2 NICs on private, 1 NIC on public, storage uses management network"
msgstr ""

#: ../../hypervisor/xenserver.rst:501
# 933cb0b64cdc4b93b709825c7f872083
msgid "2 NICs on private, 2 NICs on public, storage uses management network"
msgstr ""

#: ../../hypervisor/xenserver.rst:503
# aa2cdc325ff64d6dbeb15a9db3815249
msgid "1 NIC for private, public, and storage"
msgstr ""

#: ../../hypervisor/xenserver.rst:505
# a5c691fdc14644f1938a3d7e0616e209
msgid "All NIC bonding is optional."
msgstr ""

#: ../../hypervisor/xenserver.rst:507
# ce37792754e74070b0880c3c27ca5b6d
msgid "XenServer expects all nodes in a cluster will have the same network cabling and same bonds implemented. In an installation the master will be the first host that was added to the cluster and the slave hosts will be all subsequent hosts added to the cluster. The bonds present on the master set the expectation for hosts added to the cluster later. The procedure to set up bonds on the master and slaves are different, and are described below. There are several important implications of this:"
msgstr ""

#: ../../hypervisor/xenserver.rst:515
# 31e309b5aea94e1982a0745fa2f8d163
msgid "You must set bonds on the first host added to a cluster. Then you must use xe commands as below to establish the same bonds in the second and subsequent hosts added to a cluster."
msgstr ""

#: ../../hypervisor/xenserver.rst:519
# dc53904a0ade40e8996b6379af74299d
msgid "Slave hosts in a cluster must be cabled exactly the same as the master. For example, if eth0 is in the private bond on the master, it must be in the management network for added slave hosts."
msgstr ""

#: ../../hypervisor/xenserver.rst:525
# 5a1e3289d6064e239e1ac513d07d53c7
msgid "Management Network Bonding"
msgstr ""

#: ../../hypervisor/xenserver.rst:527
# d6933d9eedc548ea911d1c03954c8cc8
msgid "The administrator must bond the management network NICs prior to adding the host to CloudStack."
msgstr ""

#: ../../hypervisor/xenserver.rst:532
# 990edf34545641be9105fff2e790fa8e
msgid "Creating a Private Bond on the First Host in the Cluster"
msgstr ""

#: ../../hypervisor/xenserver.rst:534
# bef555ea56e644ee824b3211d285a5dc
msgid "Use the following steps to create a bond in XenServer. These steps should be run on only the first host in a cluster. This example creates the cloud-private network with two physical NICs (eth0 and eth1) bonded into it."
msgstr ""

#: ../../hypervisor/xenserver.rst:539
#: ../../hypervisor/xenserver.rst:583
# 76d14a97770b48e3b7573b8df3d95987
# 83ee5c43bfdf49078158dc0ede74e1cb
msgid "Find the physical NICs that you want to bond together."
msgstr ""

#: ../../hypervisor/xenserver.rst:546
# 19647e91e4064b26bcf46ae5ccdb7654
msgid "These command shows the eth0 and eth1 NICs and their UUIDs. Substitute the ethX devices of your choice. Call the UUID's returned by the above command slave1-UUID and slave2-UUID."
msgstr ""

#: ../../hypervisor/xenserver.rst:550
# eb485b7e38044135bbafec10517e6fda
msgid "Create a new network for the bond. For example, a new network with name \"cloud-private\"."
msgstr ""

#: ../../hypervisor/xenserver.rst:553
# 4426249063674de991301445df08c8af
msgid "**This label is important. CloudStack looks for a network by a name you configure. You must use the same name-label for all hosts in the cloud for the management network.**"
msgstr ""

#: ../../hypervisor/xenserver.rst:563
# 10a8ca3e627f42039cde96aa311c2e24
msgid "Now you have a bonded pair that can be recognized by CloudStack as the management network."
msgstr ""

#: ../../hypervisor/xenserver.rst:568
# 8237b2020d164e25afdf235b117e0226
msgid "Public Network Bonding"
msgstr ""

#: ../../hypervisor/xenserver.rst:570
# c0b0ed9d574d4595b6bccb839df5a9d6
msgid "Bonding can be implemented on a separate, public network. The administrator is responsible for creating a bond for the public network if that network will be bonded and will be separate from the management network."
msgstr ""

#: ../../hypervisor/xenserver.rst:577
# 49b1405549674b47892be73abf90bb90
msgid "Creating a Public Bond on the First Host in the Cluster"
msgstr ""

#: ../../hypervisor/xenserver.rst:579
# 80ceb8eb4f324fa288b049d1b412d166
msgid "These steps should be run on only the first host in a cluster. This example creates the cloud-public network with two physical NICs (eth2 and eth3) bonded into it."
msgstr ""

#: ../../hypervisor/xenserver.rst:590
# e9ee4656a26c4e429fa44a19deca4697
msgid "These command shows the eth2 and eth3 NICs and their UUIDs. Substitute the ethX devices of your choice. Call the UUID's returned by the above command slave1-UUID and slave2-UUID."
msgstr ""

#: ../../hypervisor/xenserver.rst:594
# ecd21d8abed7420cbdb7722f7d3bbcf6
msgid "Create a new network for the bond. For example, a new network with name \"cloud-public\"."
msgstr ""

#: ../../hypervisor/xenserver.rst:597
# f2ccf39a444949779ea15c87c23f1102
msgid "**This label is important. CloudStack looks for a network by a name you configure. You must use the same name-label for all hosts in the cloud for the public network.**"
msgstr ""

#: ../../hypervisor/xenserver.rst:607
# c63c4fffe13c41e3857c2d5a7037324d
msgid "Now you have a bonded pair that can be recognized by CloudStack as the public network."
msgstr ""

#: ../../hypervisor/xenserver.rst:612
# 4571fae00d22423c977f157626730a6b
msgid "Adding More Hosts to the Cluster"
msgstr ""

#: ../../hypervisor/xenserver.rst:614
# bb7f4bc061df424882aa108cec051dde
msgid "With the bonds (if any) established on the master, you should add additional, slave hosts. Run the following command for all additional hosts to be added to the cluster. This will cause the host to join the master in a single XenServer pool."
msgstr ""

#: ../../hypervisor/xenserver.rst:626
# 2e3ff343227f43eca63a765a974c4e58
msgid "Complete the Bonding Setup Across the Cluster"
msgstr ""

#: ../../hypervisor/xenserver.rst:628
# e54d6baf9f4a4630ae0802e0e114130f
msgid "With all hosts added to the pool, run the cloud-setup-bond script. This script will complete the configuration and set up of the bonds across all hosts in the cluster."
msgstr ""

#: ../../hypervisor/xenserver.rst:632
# 27800d5ec6e44bdcb75245bf193bfda2
msgid "Copy the script from the Management Server in /usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver/cloud-setup-bonding.sh to the master host and ensure it is executable."
msgstr ""

#: ../../hypervisor/xenserver.rst:636
# ed41f3f65d3f49209bba272a3b1c0922
msgid "Run the script:"
msgstr ""

#: ../../hypervisor/xenserver.rst:642
# 30dd45661f474b9f9d626aa8df7052e5
msgid "Now the bonds are set up and configured properly across the cluster."
msgstr ""

#: ../../hypervisor/xenserver.rst:648
# 06329e8ef297453d9fbe11b802a02387
msgid "Upgrading XenServer Versions"
msgstr ""

#: ../../hypervisor/xenserver.rst:650
# 7ae8e3b4c5e745e7b43ab29f5129e0cf
msgid "This section tells how to upgrade XenServer software on CloudStack hosts. The actual upgrade is described in XenServer documentation, but there are some additional steps you must perform before and after the upgrade."
msgstr ""

#: ../../hypervisor/xenserver.rst:656
# a49d855e0fec4ddfb046814a7a02bc58
msgid "Be sure the hardware is certified compatible with the new version of XenServer."
msgstr ""

#: ../../hypervisor/xenserver.rst:659
# dee99a5634554dc4b7188ab5c5aedc45
msgid "To upgrade XenServer:"
msgstr ""

#: ../../hypervisor/xenserver.rst:661
# c58f7ac2d954400395df0861156c145b
msgid "Upgrade the database. On the Management Server node:"
msgstr ""

#: ../../hypervisor/xenserver.rst:663
# a680a343ad5b4dc0900df3a60f835ead
msgid "Back up the database:"
msgstr ""

#: ../../hypervisor/xenserver.rst:670
# 22c201339a64428aba4b9ed4256a473e
msgid "You might need to change the OS type settings for VMs running on the upgraded hosts."
msgstr ""

#: ../../hypervisor/xenserver.rst:673
# b4e5d659dfde45c7bf1279a03e48b5c1
msgid "If you upgraded from XenServer 5.6 GA to XenServer 5.6 SP2, change any VMs that have the OS type CentOS 5.5 (32-bit), Oracle Enterprise Linux 5.5 (32-bit), or Red Hat Enterprise Linux 5.5 (32-bit) to Other Linux (32-bit). Change any VMs that have the 64-bit versions of these same OS types to Other Linux (64-bit)."
msgstr ""

#: ../../hypervisor/xenserver.rst:680
# 7573f70d77e248e5a4d430bd16631bbe
msgid "If you upgraded from XenServer 5.6 SP2 to XenServer 6.0.2, change any VMs that have the OS type CentOS 5.6 (32-bit), CentOS 5.7 (32-bit), Oracle Enterprise Linux 5.6 (32-bit), Oracle Enterprise Linux 5.7 (32-bit), Red Hat Enterprise Linux 5.6 (32-bit) , or Red Hat Enterprise Linux 5.7 (32-bit) to Other Linux (32-bit). Change any VMs that have the 64-bit versions of these same OS types to Other Linux (64-bit)."
msgstr ""

#: ../../hypervisor/xenserver.rst:688
# ecee533ad8dd40ecbab222880d5502e4
msgid "If you upgraded from XenServer 5.6 to XenServer 6.0.2, do all of the above."
msgstr ""

#: ../../hypervisor/xenserver.rst:691
# 92dd0b5b05d349f5b31a218ef5053b51
msgid "Restart the Management Server and Usage Server. You only need to do this once for all clusters."
msgstr ""

#: ../../hypervisor/xenserver.rst:699
# 609fce92c5004d349ce69313e8b259d1
msgid "Disconnect the XenServer cluster from CloudStack."
msgstr ""

#: ../../hypervisor/xenserver.rst:701
#: ../../hypervisor/xenserver.rst:803
# a0e0ba7425e84cc4b3c558e55e6ba6c1
# 9a532ffafa924e14bfdcd5a3f893f796
msgid "Log in to the CloudStack UI as root."
msgstr ""

#: ../../hypervisor/xenserver.rst:703
# cfa57057adf34d20ad28ea73d14ef535
msgid "Navigate to the XenServer cluster, and click Actions – Unmanage."
msgstr ""

#: ../../hypervisor/xenserver.rst:705
# 5d95636b239e4667b4933027c8a99a25
msgid "Watch the cluster status until it shows Unmanaged."
msgstr ""

#: ../../hypervisor/xenserver.rst:707
# 80449684af9d499095d5d868770d0e7b
msgid "Log in to one of the hosts in the cluster, and run this command to clean up the VLAN:"
msgstr ""

#: ../../hypervisor/xenserver.rst:714
# d785d08cf59f499398b8f029d5186b94
msgid "Still logged in to the host, run the upgrade preparation script:"
msgstr ""

#: ../../hypervisor/xenserver.rst:720
# 31f5837f129648c9a08eca9c059eb78c
msgid "Troubleshooting: If you see the error \"can't eject CD,\" log in to the VM and umount the CD, then run the script again."
msgstr ""

#: ../../hypervisor/xenserver.rst:723
# 715d2f02ed1c47c589935a7f3b1dafa3
msgid "Upgrade the XenServer software on all hosts in the cluster. Upgrade the master first."
msgstr ""

#: ../../hypervisor/xenserver.rst:726
# d16b76e393814c10b8ce59d9d571f9a4
msgid "Live migrate all VMs on this host to other hosts. See the instructions for live migration in the Administrator's Guide."
msgstr ""

#: ../../hypervisor/xenserver.rst:729
# 2abd9a8c661b47fc8eee237cf9108f92
msgid "Troubleshooting: You might see the following error when you migrate a VM:"
msgstr ""

#: ../../hypervisor/xenserver.rst:738
# b23537b0d5f942ccb71f8849c129899d
msgid "To solve this issue, run the following:"
msgstr ""

#: ../../hypervisor/xenserver.rst:744
# d92194b697694bd2b8152cfa36773892
msgid "Reboot the host."
msgstr ""

#: ../../hypervisor/xenserver.rst:746
# 34903a18372648c9b8b6d06d03d0e02c
msgid "Upgrade to the newer version of XenServer. Use the steps in XenServer documentation."
msgstr ""

#: ../../hypervisor/xenserver.rst:749
# 573adf7c44514928894306fcf3566a98
msgid "After the upgrade is complete, copy the following files from the management server to this host, in the directory locations shown below:"
msgstr ""

#: ../../hypervisor/xenserver.rst:754
# 18eb28018d324049916e1e1a4b9b1680
msgid "Copy this Management Server file"
msgstr ""

#: ../../hypervisor/xenserver.rst:754
# 37bd1b6db08741b39cf4840e83ad9279
msgid "To this location on the XenServer host"
msgstr ""

#: ../../hypervisor/xenserver.rst:756
# 77c4c74d05ee4ed084fecb4d94f0038e
msgid "/usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver/xenserver60/NFSSR.py"
msgstr ""

#: ../../hypervisor/xenserver.rst:756
# 5d5d441f185b4da39acede52092ab729
msgid "/opt/xensource/sm/NFSSR.py"
msgstr ""

#: ../../hypervisor/xenserver.rst:757
# b9569d25b25c47589eb352b2f26b96d8
msgid "/usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver/setupxenserver.sh"
msgstr ""

#: ../../hypervisor/xenserver.rst:757
# 8ccdd7cb7c6d4213ba0d257d2adfcf42
msgid "/opt/xensource/bin/setupxenserver.sh"
msgstr ""

#: ../../hypervisor/xenserver.rst:758
# 70be8fbba5fe4f9d81dbe6ffe68ca9fa
msgid "/usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver/make\\_migratable.sh"
msgstr ""

#: ../../hypervisor/xenserver.rst:758
# 9545ac4a5e554ac0856980527ee37e93
msgid "/opt/xensource/bin/make\\_migratable.sh"
msgstr ""

#: ../../hypervisor/xenserver.rst:759
# d5729618b07f45fa871e57a5cdd5cb11
msgid "/usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver/cloud-clean-vlan.sh"
msgstr ""

#: ../../hypervisor/xenserver.rst:759
# 0af33abd27be47cf9afd563a8049f92f
msgid "/opt/xensource/bin/cloud-clean-vlan.sh"
msgstr ""

#: ../../hypervisor/xenserver.rst:768
# 57e220ee90da43a18a72c97fb44f4642
msgid "Troubleshooting: If you see the following error message, you can safely ignore it."
msgstr ""

#: ../../hypervisor/xenserver.rst:775
# 7d8ccf199424413ca7d2c6ace78d8d25
msgid "Plug in the storage repositories (physical block devices) to the XenServer host:"
msgstr ""

#: ../../hypervisor/xenserver.rst:783
# 03e1d3926bc546a5af37036f806b6776
msgid "If you add a host to this XenServer pool, you need to migrate all VMs on this host to other hosts, and eject this host from XenServer pool."
msgstr ""

#: ../../hypervisor/xenserver.rst:786
# 9e79d6523b9b4c6982d7f0df8b920625
msgid "Repeat these steps to upgrade every host in the cluster to the same version of XenServer."
msgstr ""

#: ../../hypervisor/xenserver.rst:789
# 0f820c2f7c49419ea8cce858406d9043
msgid "Run the following command on one host in the XenServer cluster to clean up the host tags:"
msgstr ""

#: ../../hypervisor/xenserver.rst:797
# 742db1ba5463410a9d82cc3a89bb7199
msgid "When copying and pasting a command, be sure the command has pasted as a single line before executing. Some document viewers may introduce unwanted line breaks in copied text."
msgstr ""

#: ../../hypervisor/xenserver.rst:801
# 5432c32d5f10462dbd868cbbbddc88f4
msgid "Reconnect the XenServer cluster to CloudStack."
msgstr ""

#: ../../hypervisor/xenserver.rst:805
# 21a80cdb8f254573809173ca433e813e
msgid "Navigate to the XenServer cluster, and click Actions – Manage."
msgstr ""

#: ../../hypervisor/xenserver.rst:807
# feaf793c4bb243358fe6893a23769add
msgid "Watch the status to see that all the hosts come up."
msgstr ""

#: ../../hypervisor/xenserver.rst:809
# 228283144fa14ff9b751f39e8007043f
msgid "After all hosts are up, run the following on one host in the cluster:"
msgstr ""