# SOME DESCRIPTIVE TITLE.
# Copyright (C) 2014, Apache Software Foundation
# This file is distributed under the same license as the Apache CloudStack Installation Documentation package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: Apache CloudStack Installation Documentation 4\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2014-06-30 11:42+0200\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: ../../hypervisor/lxc.rst:18
# 43451b40e15f4f98aff4d4219ca70733
msgid "LXC Installation and Configuration"
msgstr ""

#: ../../hypervisor/lxc.rst:21
# 93d6379819944090af5901bb1c1c0d79
msgid "System Requirements for LXC Hosts"
msgstr ""

#: ../../hypervisor/lxc.rst:23
# bb261276bb104960bb09b70bc7e46061
msgid "LXC requires the Linux kernel cgroups functionality which is available starting 2.6.24. Although you are not required to run these distributions, the following are recommended:"
msgstr ""

#: ../../hypervisor/lxc.rst:27
# d68380379bdd49a1891a93478283a52c
msgid "CentOS / RHEL: 6.3"
msgstr ""

#: ../../hypervisor/lxc.rst:29
# d13b3427477849a8882c7a2be2c75654
msgid "Ubuntu: 12.04(.1)"
msgstr ""

#: ../../hypervisor/lxc.rst:31
# e29f5b26524649c9b046398ff037ce23
msgid "The main requirement for LXC hypervisors is the libvirt and Qemu version. No matter what Linux distribution you are using, make sure the following requirements are met:"
msgstr ""

#: ../../hypervisor/lxc.rst:35
#: ../../hypervisor/lxc.rst:43
# 94b1feafb27b4459bed9dd9a2a052c0f
# baeb40fab6b14df39610ec212fe63108
msgid "libvirt: 1.0.0 or higher"
msgstr ""

#: ../../hypervisor/lxc.rst:37
# cad5b5564070411fb6182cd0ad878821
msgid "Qemu/KVM: 1.0 or higher"
msgstr ""

#: ../../hypervisor/lxc.rst:39
# 14a04946a13a4d7b967c651ed282a8a1
msgid "The default bridge in CloudStack is the Linux native bridge implementation (bridge module). CloudStack includes an option to work with OpenVswitch, the requirements are listed below"
msgstr ""

#: ../../hypervisor/lxc.rst:45
# 50b69be40a954cff921f60a6a771059b
msgid "openvswitch: 1.7.1 or higher"
msgstr ""

#: ../../hypervisor/lxc.rst:47
# a1ade5134faf4baf99ac999ab1f26788
msgid "In addition, the following hardware requirements apply:"
msgstr ""

#: ../../hypervisor/lxc.rst:49
# d15ebc2eead24a9fb2b115ac5127ac1a
msgid "Within a single cluster, the hosts must be of the same distribution version."
msgstr ""

#: ../../hypervisor/lxc.rst:52
# 9a162b24f7fd499c9793ac22d8cd360f
msgid "All hosts within a cluster must be homogenous. The CPUs must be of the same type, count, and feature flags."
msgstr ""

#: ../../hypervisor/lxc.rst:55
# cd66e1991f8b4d80b5267dda55cec2a8
msgid "Must support HVM (Intel-VT or AMD-V enabled)"
msgstr ""

#: ../../hypervisor/lxc.rst:57
# 717b8bb8d1a742d3a0abef21e3f17b90
msgid "64-bit x86 CPU (more cores results in better performance)"
msgstr ""

#: ../../hypervisor/lxc.rst:59
# 348214c7e23d48889b3b01488710391f
msgid "4 GB of memory"
msgstr ""

#: ../../hypervisor/lxc.rst:61
# 4443612c88374256a08ca5fe5b53af70
msgid "At least 1 NIC"
msgstr ""

#: ../../hypervisor/lxc.rst:63
# 1e16cfc2f05e4c219030609a9486327f
msgid "When you deploy CloudStack, the hypervisor host must not have any VMs already running"
msgstr ""

#: ../../hypervisor/lxc.rst:68
# 5c575160ed0446838d1cdebcd70cc5b1
msgid "LXC Installation Overview"
msgstr ""

#: ../../hypervisor/lxc.rst:70
# f252d45b9213468d9646dc4f539523fa
msgid "LXC does not have any native system VMs, instead KVM will be used to run system VMs. This means that your host will need to support both LXC and KVM, thus most of the installation and configuration will be identical to the KVM installation. The material in this section doesn't duplicate KVM installation docs. It provides the CloudStack-specific steps that are needed to prepare a KVM host to work with CloudStack."
msgstr ""

#: ../../hypervisor/lxc.rst:78
# 99cca852be7249bd8ea16dc52a8b405e
msgid "Before continuing, make sure that you have applied the latest updates to your host."
msgstr ""

#: ../../hypervisor/lxc.rst:82
# 7a72cc592a1f4a5cb0cacebf3883d960
msgid "It is NOT recommended to run services on this host not controlled by CloudStack."
msgstr ""

#: ../../hypervisor/lxc.rst:85
# d6f4000ff3874464bb929b7fb2e49dcc
msgid "The procedure for installing an LXC Host is:"
msgstr ""

#: ../../hypervisor/lxc.rst:87
#: ../../hypervisor/lxc.rst:97
# 3957e2eca5b1450fa2cdac31e4c4baa9
# d3b55c0bf6044446b80d37400ebc93b9
msgid "Prepare the Operating System"
msgstr ""

#: ../../hypervisor/lxc.rst:89
# 055e7a4b9b6f40098143553e04e75142
msgid "Install and configure libvirt"
msgstr ""

#: ../../hypervisor/lxc.rst:91
# 3d012316e0e548a898752588ad9f8ea6
msgid "Configure Security Policies (AppArmor and SELinux)"
msgstr ""

#: ../../hypervisor/lxc.rst:93
#: ../../hypervisor/lxc.rst:140
# 64413c2cb08e4dc4b057fd257e1e983e
# 8ef5b6b2388141729517cc4fefd87440
msgid "Install and configure the Agent"
msgstr ""

#: ../../hypervisor/lxc.rst:99
# 8466bfaf482d4d6599658d9411867dea
msgid "The OS of the Host must be prepared to host the CloudStack Agent and run KVM instances."
msgstr ""

#: ../../hypervisor/lxc.rst:102
# 75c2b7bef1834d809a1804dc83d2e1fa
msgid "Log in to your OS as root."
msgstr ""

#: ../../hypervisor/lxc.rst:104
# b9dccd7b46514913be1eb8e7b074ac01
msgid "Check for a fully qualified hostname."
msgstr ""

#: ../../hypervisor/lxc.rst:110
# 95a324234f074b9991a1c506af6239c2
msgid "This should return a fully qualified hostname such as \"kvm1.lab.example.org\". If it does not, edit /etc/hosts so that it does."
msgstr ""

#: ../../hypervisor/lxc.rst:114
# abcfdb639b3c48e994b3f12ffb1cada1
msgid "Make sure that the machine can reach the Internet."
msgstr ""

#: ../../hypervisor/lxc.rst:120
# de73cc85f6bb44e788c9ea8d31d6a6ad
msgid "Turn on NTP for time synchronization."
msgstr ""

#: ../../hypervisor/lxc.rst:123
# 9d75eb82ba9f45178754d7a1b28c6a52
msgid "NTP is required to synchronize the clocks of the servers in your cloud. Unsynchronized clocks can cause unexpected problems."
msgstr ""

#: ../../hypervisor/lxc.rst:126
# 05286054f8844c638f951a6f8fb5b85e
msgid "Install NTP"
msgstr ""

#: ../../hypervisor/lxc.rst:136
# bbe6d187091b41178985da38a664feb3
msgid "Repeat all of these steps on every hypervisor host."
msgstr ""

#: ../../hypervisor/lxc.rst:142
# 045c7ecca5a246ff9218024c3f3ae129
msgid "To manage LXC instances on the host CloudStack uses a Agent. This Agent communicates with the Management server and controls all the instances on the host."
msgstr ""

#: ../../hypervisor/lxc.rst:146
# c201aad8986d46c891235c1b0db5cd06
msgid "First we start by installing the agent:"
msgstr ""

#: ../../hypervisor/lxc.rst:148
#: ../../hypervisor/lxc.rst:260
#: ../../hypervisor/lxc.rst:296
# 415c53c92754469eb9cc8121af962ecf
# fb5081e503f74e6995e63f1dd73d384d
# 67c12bc85b6c4cd28de0f5dfaf696bf0
msgid "In RHEL or CentOS:"
msgstr ""

#: ../../hypervisor/lxc.rst:154
#: ../../hypervisor/lxc.rst:266
# d1b500c6b3bb470f8ad07118cc13a0bf
# 69d3e8a5b14a4d32a55350bfa8b6f12a
msgid "In Ubuntu:"
msgstr ""

#: ../../hypervisor/lxc.rst:160
# 04df1ba82d804c3e93844dbf7cdd829d
msgid "Next step is to update the Agent configuration setttings. The settings are in ``/etc/cloudstack/agent/agent.properties``"
msgstr ""

#: ../../hypervisor/lxc.rst:163
# 3948b221adf748639788b545bdd0e3a7
msgid "Set the Agent to run in LXC mode:"
msgstr ""

#: ../../hypervisor/lxc.rst:169
# cb52c2209b544fd8a09751340ec83214
msgid "Optional: If you would like to use direct networking (instead of the default bridge networking), configure these lines:"
msgstr ""

#: ../../hypervisor/lxc.rst:184
#: ../../hypervisor/lxc.rst:667
# 6d6647d83e8145d28e4220e85924d010
# c8b990ebe5d445a78252e84e2c4e5652
msgid "The host is now ready to be added to a cluster. This is covered in a later section, see :ref:`adding-a-host`. It is recommended that you continue to read the documentation before adding the host!"
msgstr ""

#: ../../hypervisor/lxc.rst:191
# cacd4ea9375c4864a2c9fb041bb4bc7c
msgid "Install and Configure libvirt"
msgstr ""

#: ../../hypervisor/lxc.rst:193
# b0f7e7f7680e490eacb65fb0cb1b98c6
msgid "CloudStack uses libvirt for managing virtual machines. Therefore it is vital that libvirt is configured correctly. Libvirt is a dependency of cloudstack-agent and should already be installed."
msgstr ""

#: ../../hypervisor/lxc.rst:197
# f54bd7715b5441f687683613bff00956
msgid "In order to have live migration working libvirt has to listen for unsecured TCP connections. We also need to turn off libvirts attempt to use Multicast DNS advertising. Both of these settings are in ``/etc/libvirt/libvirtd.conf``"
msgstr ""

#: ../../hypervisor/lxc.rst:202
# 7307dff0578a4767a3b5fa1812366060
msgid "Set the following parameters:"
msgstr ""

#: ../../hypervisor/lxc.rst:224
# 15b53ac02e8d44e0aa89579320fcdb63
msgid "Turning on \"listen\\_tcp\" in libvirtd.conf is not enough, we have to change the parameters as well:"
msgstr ""

#: ../../hypervisor/lxc.rst:227
# 48d050262fe84becbb7e6c94efc4dfba
msgid "On RHEL or CentOS modify ``/etc/sysconfig/libvirtd``:"
msgstr ""

#: ../../hypervisor/lxc.rst:229
# 76e8b6056dc84935aaf0ca036b0155ee
msgid "Uncomment the following line:"
msgstr ""

#: ../../hypervisor/lxc.rst:235
# f3a3573b89414eb4a4d76ebbe98300d9
msgid "On Ubuntu: modify ``/etc/default/libvirt-bin``"
msgstr ""

#: ../../hypervisor/lxc.rst:237
# dd99331d08b34cb7acceb95817539208
msgid "Add \"-l\" to the following line"
msgstr ""

#: ../../hypervisor/lxc.rst:243
# 0322d77ee56e454c9351e115b1a8a45d
msgid "so it looks like:"
msgstr ""

#: ../../hypervisor/lxc.rst:249
# 6334d52ad51a4fc69fc58128e38f2319
msgid "In order to have the VNC Console work we have to make sure it will bind on 0.0.0.0. We do this by editing ``/etc/libvirt/qemu.conf``"
msgstr ""

#: ../../hypervisor/lxc.rst:252
# 27259d3d47ab4f929936de05e3d77118
msgid "Make sure this parameter is set:"
msgstr ""

#: ../../hypervisor/lxc.rst:258
# 314400b666db4e16b3133e7ddb4aa140
msgid "Restart libvirt"
msgstr ""

#: ../../hypervisor/lxc.rst:274
# 4d9c0c7846c0455b97268a20ec9eb588
msgid "Configure the Security Policies"
msgstr ""

#: ../../hypervisor/lxc.rst:276
# c9864510ba8d4a5183f23a8c14f94563
msgid "CloudStack does various things which can be blocked by security mechanisms like AppArmor and SELinux. These have to be disabled to ensure the Agent has all the required permissions."
msgstr ""

#: ../../hypervisor/lxc.rst:280
# 19dce9911cb5468e8ecca028cc3629d0
msgid "Configure SELinux (RHEL and CentOS)"
msgstr ""

#: ../../hypervisor/lxc.rst:282
# c7bde8f0637b4bc0b30d695a9148ea26
msgid "Check to see whether SELinux is installed on your machine. If not, you can skip this section."
msgstr ""

#: ../../hypervisor/lxc.rst:285
# 4153e72e86e54e569528229e10430c13
msgid "In RHEL or CentOS, SELinux is installed and enabled by default. You can verify this with:"
msgstr ""

#: ../../hypervisor/lxc.rst:292
# bcc78a8cd2f343dead2d193b7d56bf2e
msgid "Set the SELINUX variable in ``/etc/selinux/config`` to \"permissive\". This ensures that the permissive setting will be maintained after a system reboot."
msgstr ""

#: ../../hypervisor/lxc.rst:302
# 43e21420401741e2997b97701eff333e
msgid "Change the following line"
msgstr ""

#: ../../hypervisor/lxc.rst:308
# 90ead7a947fc40daabdafad6a1b988fb
msgid "to this"
msgstr ""

#: ../../hypervisor/lxc.rst:314
# 3040526ce2ff4279bafd31876dd69d4a
msgid "Then set SELinux to permissive starting immediately, without requiring a system reboot."
msgstr ""

#: ../../hypervisor/lxc.rst:321
# 52396bdef51d440f9db42978c93847dc
msgid "Configure Apparmor (Ubuntu)"
msgstr ""

#: ../../hypervisor/lxc.rst:323
# 19599a1513614b4f984636e98ee6d2f1
msgid "Check to see whether AppArmor is installed on your machine. If not, you can skip this section."
msgstr ""

#: ../../hypervisor/lxc.rst:326
# 7c0035c7f5ec4b07ba0088564f98754e
msgid "In Ubuntu AppArmor is installed and enabled by default. You can verify this with:"
msgstr ""

#: ../../hypervisor/lxc.rst:333
# 4d576628709d47f38d097a74e45b5aa4
msgid "Disable the AppArmor profiles for libvirt"
msgstr ""

#: ../../hypervisor/lxc.rst:353
# 4182b6b7d26b46b99feff257f01b0b19
msgid "Configure the network bridges"
msgstr ""

#: ../../hypervisor/lxc.rst:356
# c4f546fe4c1d46b0a68265d339df86ff
msgid "This is a very important section, please make sure you read this thoroughly."
msgstr ""

#: ../../hypervisor/lxc.rst:359
# e0a8dbc6e7e9410fa60dd28738b69792
msgid "This section details how to configure bridges using the native implementation in Linux. Please refer to the next section if you intend to use OpenVswitch"
msgstr ""

#: ../../hypervisor/lxc.rst:363
# 7dfb485a01f249d39f5527e0c4c36cf9
msgid "In order to forward traffic to your instances you will need at least two bridges: *public* and *private*."
msgstr ""

#: ../../hypervisor/lxc.rst:366
# 9948a8e0c4ca41c38a570931fd602edc
msgid "By default these bridges are called *cloudbr0* and *cloudbr1*, but you do have to make sure they are available on each hypervisor."
msgstr ""

#: ../../hypervisor/lxc.rst:369
# dcbc1defc34f4793b6b6f08e1434ee90
msgid "The most important factor is that you keep the configuration consistent on all your hypervisors."
msgstr ""

#: ../../hypervisor/lxc.rst:374
# bc77d68b01c842caaba9c228953c9c9a
msgid "Network example"
msgstr ""

#: ../../hypervisor/lxc.rst:376
# d445133ac7514f30b223a361e185bca3
msgid "There are many ways to configure your network. In the Basic networking mode you should have two (V)LAN's, one for your private network and one for the public network."
msgstr ""

#: ../../hypervisor/lxc.rst:380
# 7fcbe3dbd5e24cc78a454b43046db3dc
msgid "We assume that the hypervisor has one NIC (eth0) with three tagged VLAN's:"
msgstr ""

#: ../../hypervisor/lxc.rst:383
# 79f9905e712d4477ad6f1242de95100a
msgid "VLAN 100 for management of the hypervisor"
msgstr ""

#: ../../hypervisor/lxc.rst:385
# ae33b27f9bac420195c64c0770a86cd0
msgid "VLAN 200 for public network of the instances (cloudbr0)"
msgstr ""

#: ../../hypervisor/lxc.rst:387
# fa09f2d8754547ca8140ba9117584838
msgid "VLAN 300 for private network of the instances (cloudbr1)"
msgstr ""

#: ../../hypervisor/lxc.rst:389
# 6b19d1a474714e77a49083b08d8a70ad
msgid "On VLAN 100 we give the Hypervisor the IP-Address 192.168.42.11/24 with the gateway 192.168.42.1"
msgstr ""

#: ../../hypervisor/lxc.rst:393
# 66e4325554bd44839b00ff46222bb488
msgid "The Hypervisor and Management server don't have to be in the same subnet!"
msgstr ""

#: ../../hypervisor/lxc.rst:396
# 0c38727f3c5145db8ac92b2df423f9f3
msgid "Configuring the network bridges"
msgstr ""

#: ../../hypervisor/lxc.rst:398
# 87f57c9a5f394d4f9d55876ad8bbf7b5
msgid "It depends on the distribution you are using how to configure these, below you'll find examples for RHEL/CentOS and Ubuntu."
msgstr ""

#: ../../hypervisor/lxc.rst:402
# 66be5e9df4cc4265a1e9b7b608fe271a
msgid "The goal is to have two bridges called 'cloudbr0' and 'cloudbr1' after this section. This should be used as a guideline only. The exact configuration will depend on your network layout."
msgstr ""

#: ../../hypervisor/lxc.rst:408
# 77f72e31b31c4ff48abfeab14d5c4b81
msgid "Configure in RHEL or CentOS"
msgstr ""

#: ../../hypervisor/lxc.rst:410
# 5cd8006226944c75823d3fc69513965f
msgid "The required packages were installed when libvirt was installed, we can proceed to configuring the network."
msgstr ""

#: ../../hypervisor/lxc.rst:413
# 3c73eb0802d2412eba4716e54ae34079
msgid "First we configure eth0"
msgstr ""

#: ../../hypervisor/lxc.rst:419
# 19f74e9662c943b2b0d717aa2d8e80bf
msgid "Make sure it looks similar to:"
msgstr ""

#: ../../hypervisor/lxc.rst:430
# e751abe2e0124ba9b0f542abd413a2d0
msgid "We now have to configure the three VLAN interfaces:"
msgstr ""

#: ../../hypervisor/lxc.rst:479
# 821a8f3fb92d431e8be2f46a196c35bb
msgid "Now we have the VLAN interfaces configured we can add the bridges on top of them."
msgstr ""

#: ../../hypervisor/lxc.rst:486
# 755eeca19e1e4bd98aff0dd3a0c00845
msgid "Now we just configure it is a plain bridge without an IP-Address"
msgstr ""

#: ../../hypervisor/lxc.rst:499
# b04314407fb64b85844b09abb048169b
msgid "We do the same for cloudbr1"
msgstr ""

#: ../../hypervisor/lxc.rst:516
#: ../../hypervisor/lxc.rst:566
# ec7d49c23ca9494d9ae4d1fd87a835cb
# 3495886017224d39aa2c595d960a7ef1
msgid "With this configuration you should be able to restart the network, although a reboot is recommended to see if everything works properly."
msgstr ""

#: ../../hypervisor/lxc.rst:520
#: ../../hypervisor/lxc.rst:570
# 3b0ccd039c8d42b4a0e5d7b35d533763
# 16b5ca319946407fb1a833f3f566ad4c
msgid "Make sure you have an alternative way like IPMI or ILO to reach the machine in case you made a configuration error and the network stops functioning!"
msgstr ""

#: ../../hypervisor/lxc.rst:525
# 33fce556fd75408baf0d8f252c1c4aa9
msgid "Configure in Ubuntu"
msgstr ""

#: ../../hypervisor/lxc.rst:527
# 57356f0b3a6b48878fc6cc570d10d516
msgid "All the required packages were installed when you installed libvirt, so we only have to configure the network."
msgstr ""

#: ../../hypervisor/lxc.rst:534
# bde1178e96404b77bb9b9c18c923aa2e
msgid "Modify the interfaces file to look like this:"
msgstr ""

#: ../../hypervisor/lxc.rst:575
# d5065122bf4a4f5c83dedf6baa1c2306
msgid "Configuring the firewall"
msgstr ""

#: ../../hypervisor/lxc.rst:577
# 2749450a561548e3b39d03e1a9af0672
msgid "The hypervisor needs to be able to communicate with other hypervisors and the management server needs to be able to reach the hypervisor."
msgstr ""

#: ../../hypervisor/lxc.rst:580
# c76bea5d16c743f88d76b477d69bf172
msgid "In order to do so we have to open the following TCP ports (if you are using a firewall):"
msgstr ""

#: ../../hypervisor/lxc.rst:583
# e0a0a271492c47a0b549ec0fa2319108
msgid "22 (SSH)"
msgstr ""

#: ../../hypervisor/lxc.rst:585
# 0d0046b470a24b35a6bbbb93e416d8ea
msgid "1798"
msgstr ""

#: ../../hypervisor/lxc.rst:587
# 9d1fa0fdb4ef48c0ad4b41556ca20e9d
msgid "16509 (libvirt)"
msgstr ""

#: ../../hypervisor/lxc.rst:589
# e5d29bf0b5604b418180606c2d4826e4
msgid "5900 - 6100 (VNC consoles)"
msgstr ""

#: ../../hypervisor/lxc.rst:591
# 53bdbd256dd44308a212a48b8de7be9c
msgid "49152 - 49216 (libvirt live migration)"
msgstr ""

#: ../../hypervisor/lxc.rst:593
# e1b82341b7f14145ae2b1be829bcdf18
msgid "It depends on the firewall you are using how to open these ports. Below you'll find examples how to open these ports in RHEL/CentOS and Ubuntu."
msgstr ""

#: ../../hypervisor/lxc.rst:598
# eadaeb9bb6514298924b9fb479ddb280
msgid "Open ports in RHEL/CentOS"
msgstr ""

#: ../../hypervisor/lxc.rst:600
# dbd7938f1a764dfe9159e9eaa1119863
msgid "RHEL and CentOS use iptables for firewalling the system, you can open extra ports by executing the following iptable commands:"
msgstr ""

#: ../../hypervisor/lxc.rst:623
# d20a63121d8d4a90b51c2e5eb1dc1b8e
msgid "These iptable settings are not persistent accross reboots, we have to save them first."
msgstr ""

#: ../../hypervisor/lxc.rst:632
# 43b24147a3aa400f940581bae2f54fb3
msgid "Open ports in Ubuntu"
msgstr ""

#: ../../hypervisor/lxc.rst:634
# dbd52c7373bd40008b953dc3d9b13496
msgid "The default firewall under Ubuntu is UFW (Uncomplicated FireWall), which is a Python wrapper around iptables."
msgstr ""

#: ../../hypervisor/lxc.rst:637
# 34381e08303c46de9cb9a2ba59cc3026
msgid "To open the required ports, execute the following commands:"
msgstr ""

#: ../../hypervisor/lxc.rst:660
# 36b32007e54b471f951bbd763f7a7d04
msgid "By default UFW is not enabled on Ubuntu. Executing these commands with the firewall disabled does not enable the firewall."
msgstr ""

#: ../../hypervisor/lxc.rst:665
# 1f96f5667281430689c6573d520ffbbc
msgid "Add the host to CloudStack"
msgstr ""