source/upgrade/upgrade-4.3.rst - cloudstack-docs-rn - Git at Google

 .. Licensed to the Apache Software Foundation (ASF) under one
    or more contributor license agreements.  See the NOTICE file
    distributed with this work for additional information#
    regarding copyright ownership.  The ASF licenses this file
    to you under the Apache License, Version 2.0 (the
    "License"); you may not use this file except in compliance
    with the License.  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing,
    software distributed under the License is distributed on an
    "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
    KIND, either express or implied.  See the License for the
    specific language governing permissions and limitations
    under the License.


 .. |version_to_upgrade| replace:: 4.3.x

 Upgrade Instruction from |version_to_upgrade|
 =============================================

 This section will guide you from CloudStack |version_to_upgrade| to CloudStack
 |version|.

 Any steps that are hypervisor-specific will be called out with a note.

 We recommend reading through this section once or twice before beginning
 your upgrade procedure, and working through it on a test system before
 working on a production system.

 .. note::
    The following upgrade instructions should be performed regardless of
    hypervisor type.

 Upgrade Steps:

 #. Backup CloudStack database (MySQL)
 #. Install new systemvm template
 #. Add package repository for MySQL connector
 #. Upgrade CloudStack management server(s)
 #. Update hypervisors specific dependencies


 Packages repository
 -------------------

 Most users of CloudStack manage the installation and upgrades of
 CloudStack with one of Linux's predominant package systems, RPM or
 APT. This guide assumes you'll be using RPM and Yum (for Red Hat
 Enterprise Linux or CentOS), or APT and Debian packages (for Ubuntu).

 Create RPM or Debian packages (as appropriate) and a repository from
 the |version| source, or check the Apache CloudStack downloads page at
 http://cloudstack.apache.org/downloads.html
 for package repositories supplied by community members. You will need
 them for :ref:`ubuntu43` or :ref:`rhel43` and :ref:`kvm43` hosts upgrade.

 Instructions for creating packages from the CloudStack source are in the
 `CloudStack Installation Guide`_.

 .. include:: _sysvm_templates.rst


 Database Preparation
 --------------------

 Backup current database

 #. Stop your management server or servers. Run this on all management
    server hosts:

    .. sourcecode:: bash

       $ sudo service cloudstack-management stop

 #. If you are running a usage server or usage servers, stop those as well:

    .. sourcecode:: bash

       $ sudo service cloudstack-usage stop

 #. Make a backup of your MySQL database. If you run into any issues or
    need to roll back the upgrade, this will assist in debugging or
    restoring your existing environment. You'll be prompted for your
    password.

    .. sourcecode:: bash

       $ mysqldump -u root -p cloud > cloud-backup_`date '+%Y-%m-%d'`.sql
       $ mysqldump -u root -p cloud_usage > cloud_usage-backup_`date '+%Y-%m-%d'`.sql

 #. **(KVM Only)** If primary storage of type local storage is in use, the
    path for this storage needs to be verified to ensure it passes new
    validation. Check local storage by querying the cloud.storage\_pool
    table:

    .. sourcecode:: bash

       $ mysql -u cloud -p -e "select id,name,path from cloud.storage_pool where pool_type='Filesystem'"

    If local storage paths are found to have a trailing forward slash,
    remove it:

    .. sourcecode:: bash

       $ mysql -u cloud -p -e 'update cloud.storage_pool set path="/var/lib/libvirt/images" where path="/var/lib/libvirt/images/"';


 .. _ubuntu43:

 Management Server on Ubuntu
 ---------------------------

 If you are using Ubuntu, follow this procedure to upgrade your packages. If
 not, skip to step :ref:`rhel43`.

 .. note::
    **Community Packages:** This section assumes you're using the community
    supplied packages for CloudStack. If you've created your own packages and
    APT repository, substitute your own URL for the ones used in these examples.

 The first order of business will be to change the sources list for
 each system with CloudStack packages. This means all management
 servers, and any hosts that have the KVM agent. (No changes should
 be necessary for hosts that are running VMware or Xen.)


 .. _apt-repo43:

 .. include:: _java_8_ubuntu.rst

 CloudStack apt repository
 ^^^^^^^^^^^^^^^^^^^^^^^^^

 Start by opening ``/etc/apt/sources.list.d/cloudstack.list`` on
 any systems that have CloudStack packages installed.

 This file should have one line, which contains:

 .. sourcecode:: bash

    deb http://cloudstack.apt-get.eu/ubuntu precise 4.3

 We'll change it to point to the new package repository:

 .. sourcecode:: bash

    deb http://cloudstack.apt-get.eu/ubuntu precise 4.9

 Setup the public key for the above repository:

 .. sourcecode:: bash

    wget -qO - http://cloudstack.apt-get.eu/release.asc | sudo apt-key add -

 If you're using your own package repository, change this line to
 read as appropriate for your |version| repository.

 #. Now update your apt package list:

    .. sourcecode:: bash

       $ sudo apt-get update

 #. Now that you have the repository configured, it's time to upgrade
    the ``cloudstack-management`` package.

    .. sourcecode:: bash

       $ sudo apt-get upgrade cloudstack-management

 #. If you use CloudStack usage server

    .. sourcecode:: bash

       $ sudo apt-get upgrade cloudstack-usage


 .. _rhel43:

 Management Server on CentOS/RHEL
 --------------------------------

 If you are using CentOS or RHEL, follow this procedure to upgrade your
 packages. If not, skip to hypervisors section, then :ref:`upg-sysvm43`.

 .. note::
    **Community Packages:** This section assumes you're using the community
    supplied packages for CloudStack. If you've created your own packages and
    yum repository, substitute your own URL for the ones used in these examples.

 .. include:: _mysql_connector.rst


 .. _rpm-repo43:

 CloudStack RPM repository
 ^^^^^^^^^^^^^^^^^^^^^^^^^^

 The first order of business will be to change the yum repository
 for each system with CloudStack packages. This means all
 management servers, and any hosts that have the KVM agent.

 (No changes should be necessary for hosts that are running VMware or Xen.)

 Start by opening ``/etc/yum.repos.d/cloudstack.repo`` on any
 systems that have CloudStack packages installed.

 This file should have content similar to the following:

 .. sourcecode:: bash

    [apache-cloudstack]
    name=Apache CloudStack
    baseurl=http://cloudstack.apt-get.eu/rhel/4.3/
    enabled=1
    gpgcheck=0

 If you are using the community provided package repository, change
 the base url to ``http://cloudstack.apt-get.eu/centos/$releasever/4.9/``.

 Setup the GPG public key if you wish to enable ``gpgcheck=1``:

 .. sourcecode:: bash

    rpm --import http://cloudstack.apt-get.eu/RPM-GPG-KEY

 If you're using your own package repository, change this line to
 read as appropriate for your |version| repository.

 #. Remove the deprecated dependency for awsapi.

    .. sourcecode:: bash

       $ sudo rpm -e --nodeps cloudstack-awsapi

 #. Now that you have the repository configured, it's time to upgrade the
    ``cloudstack-management``.

    .. sourcecode:: bash

       $ sudo yum upgrade cloudstack-management

 #. If you use CloudStack usage server

    .. sourcecode:: bash

       $ sudo yum upgrade cloudstack-usage


 Hypervisor: XenServer
 ---------------------

 **(XenServer only)** Copy vhd-utils file on CloudStack management servers.
 Copy the file `vhd-utils <http://download.cloudstack.org/tools/vhd-util>`_
 to ``/usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver``.

 .. sourcecode:: bash

    wget -P /usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver \
    http://download.cloudstack.org/tools/vhd-util

 .. include:: _xenserver_upg.rst


 Hypervisor: VMware
 ------------------

 .. warning::
    For VMware hypervisor CloudStack management server packages must be
    build using "noredist". Refer to `Building from Source
    <http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/latest/building_from_source.html>`_.

 **(VMware only)** Additional steps are required for each VMware cluster.
 These steps will not affect running guests in the cloud. These steps
 are required only for clouds using VMware clusters:

 #. Stop the Management Server:

    .. sourcecode:: bash

       $ sudo service cloudstack-management stop

 #. Generate the encrypted equivalent of your vCenter password:

    .. sourcecode:: bash

       $ java -classpath /usr/share/cloudstack-common/lib/jasypt-1.9.2.jar org.jasypt.intf.cli.JasyptPBEStringEncryptionCLI encrypt.sh input="_your_vCenter_password_" password="`cat /etc/cloudstack/management/key`" verbose=false

    Store the output from this step, we need to add this in
    cluster\_details table and vmware\_data\_center tables in place of
    the plain text password

 #. Find the ID of the row of cluster\_details table that you have to
    update:

    .. sourcecode:: bash

       $ mysql -u <username> -p<password>

    .. sourcecode:: bash

       select * from cloud.cluster_details;

 #. Update the plain text password with the encrypted one

    .. sourcecode:: bash

       update cloud.cluster_details set value = '_ciphertext_from_step_1_' where id = _id_from_step_2_;

 #. Confirm that the table is updated:

    .. sourcecode:: bash

       select * from cloud.cluster_details;

 #. Find the ID of the correct row of vmware\_data\_center that you
    want to update

    .. sourcecode:: bash

       select * from cloud.vmware_data_center;

 #. update the plain text password with the encrypted one:

    .. sourcecode:: bash

       update cloud.vmware_data_center set password = '_ciphertext_from_step_1_' where id = _id_from_step_5_;

 #. Confirm that the table is updated:

    .. sourcecode:: bash

       select * from cloud.vmware_data_center;


 .. _kvm43:

 Hypervisor: KVM
 ---------------

 KVM on Ubuntu
 ^^^^^^^^^^^^^

 (KVM only) Additional steps are required for each KVM host. These
 steps will not affect running guests in the cloud. These steps are
 required only for clouds using KVM as hosts and only on the KVM
 hosts.

 #. Configure the :ref:`apt-repo43` as detailed above.

 #. Stop the running agent.

    .. sourcecode:: bash

       $ sudo service cloudstack-agent stop

 #. Update the agent software.

    .. sourcecode:: bash

       $ sudo apt-get upgrade cloudstack-agent

 #. Verify that the file ``/etc/cloudstack/agent/environment.properties`` has a
    line that reads:

    .. sourcecode:: bash

       paths.script=/usr/share/cloudstack-common

    If not, add the line.

 #. Start the agent.

    .. sourcecode:: bash

       $ sudo service cloudstack-agent start


 KVM on CentOS/RHEL
 ^^^^^^^^^^^^^^^^^^

 For KVM hosts, upgrade the ``cloudstack-agent`` package

 #. Configure the :ref:`rpm-repo43` as detailed above.

    .. sourcecode:: bash

       $ sudo yum upgrade cloudstack-agent

 #. Verify that the file ``/etc/cloudstack/agent/environment.properties`` has a
    line that reads:

    .. sourcecode:: bash

       paths.script=/usr/share/cloudstack-common

    If not, add the line.

 #. Restart the agent:

    .. sourcecode:: bash

       $ sudo service cloudstack-agent stop
       $ sudo killall jsvc
       $ sudo service cloudstack-agent start


 Restart management services
 ---------------------------

 #. Now it's time to start the management server

    .. sourcecode:: bash

       $ sudo service cloudstack-management start

 #. If you use it, start the usage server

    .. sourcecode:: bash

       $ sudo service cloudstack-usage start


 .. _upg-sysvm43:

 System-VMs and Virtual-Routers
 ------------------------------

 .. include:: _sysvm_restart.rst


 .. include:: /global.rst
	.. Licensed to the Apache Software Foundation (ASF) under one
	or more contributor license agreements. See the NOTICE file
	distributed with this work for additional information#
	regarding copyright ownership. The ASF licenses this file
	to you under the Apache License, Version 2.0 (the
	"License"); you may not use this file except in compliance
	with the License. You may obtain a copy of the License at
	http://www.apache.org/licenses/LICENSE-2.0
	Unless required by applicable law or agreed to in writing,
	software distributed under the License is distributed on an
	"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
	KIND, either express or implied. See the License for the
	specific language governing permissions and limitations
	under the License.


	.. \|version_to_upgrade\| replace:: 4.3.x

	Upgrade Instruction from \|version_to_upgrade\|
	=============================================

	This section will guide you from CloudStack \|version_to_upgrade\| to CloudStack
	\|version\|.

	Any steps that are hypervisor-specific will be called out with a note.

	We recommend reading through this section once or twice before beginning
	your upgrade procedure, and working through it on a test system before
	working on a production system.

	.. note::
	The following upgrade instructions should be performed regardless of
	hypervisor type.

	Upgrade Steps:

	#. Backup CloudStack database (MySQL)
	#. Install new systemvm template
	#. Add package repository for MySQL connector
	#. Upgrade CloudStack management server(s)
	#. Update hypervisors specific dependencies


	Packages repository
	-------------------

	Most users of CloudStack manage the installation and upgrades of
	CloudStack with one of Linux's predominant package systems, RPM or
	APT. This guide assumes you'll be using RPM and Yum (for Red Hat
	Enterprise Linux or CentOS), or APT and Debian packages (for Ubuntu).

	Create RPM or Debian packages (as appropriate) and a repository from
	the \|version\| source, or check the Apache CloudStack downloads page at
	http://cloudstack.apache.org/downloads.html
	for package repositories supplied by community members. You will need
	them for :ref:`ubuntu43` or :ref:`rhel43` and :ref:`kvm43` hosts upgrade.

	Instructions for creating packages from the CloudStack source are in the
	`CloudStack Installation Guide`_.

	.. include:: _sysvm_templates.rst


	Database Preparation
	--------------------

	Backup current database

	#. Stop your management server or servers. Run this on all management
	server hosts:

	.. sourcecode:: bash

	$ sudo service cloudstack-management stop

	#. If you are running a usage server or usage servers, stop those as well:

	.. sourcecode:: bash

	$ sudo service cloudstack-usage stop

	#. Make a backup of your MySQL database. If you run into any issues or
	need to roll back the upgrade, this will assist in debugging or
	restoring your existing environment. You'll be prompted for your
	password.

	.. sourcecode:: bash

	$ mysqldump -u root -p cloud > cloud-backup_`date '+%Y-%m-%d'`.sql
	$ mysqldump -u root -p cloud_usage > cloud_usage-backup_`date '+%Y-%m-%d'`.sql

	#. (KVM Only) If primary storage of type local storage is in use, the
	path for this storage needs to be verified to ensure it passes new
	validation. Check local storage by querying the cloud.storage\_pool
	table:

	.. sourcecode:: bash

	$ mysql -u cloud -p -e "select id,name,path from cloud.storage_pool where pool_type='Filesystem'"

	If local storage paths are found to have a trailing forward slash,
	remove it:

	.. sourcecode:: bash

	$ mysql -u cloud -p -e 'update cloud.storage_pool set path="/var/lib/libvirt/images" where path="/var/lib/libvirt/images/"';


	.. _ubuntu43:

	Management Server on Ubuntu
	---------------------------

	If you are using Ubuntu, follow this procedure to upgrade your packages. If
	not, skip to step :ref:`rhel43`.

	.. note::
	Community Packages: This section assumes you're using the community
	supplied packages for CloudStack. If you've created your own packages and
	APT repository, substitute your own URL for the ones used in these examples.

	The first order of business will be to change the sources list for
	each system with CloudStack packages. This means all management
	servers, and any hosts that have the KVM agent. (No changes should
	be necessary for hosts that are running VMware or Xen.)


	.. _apt-repo43:

	.. include:: _java_8_ubuntu.rst

	CloudStack apt repository
	^^^^^^^^^^^^^^^^^^^^^^^^^

	Start by opening ``/etc/apt/sources.list.d/cloudstack.list`` on
	any systems that have CloudStack packages installed.

	This file should have one line, which contains:

	.. sourcecode:: bash

	deb http://cloudstack.apt-get.eu/ubuntu precise 4.3

	We'll change it to point to the new package repository:

	.. sourcecode:: bash

	deb http://cloudstack.apt-get.eu/ubuntu precise 4.9

	Setup the public key for the above repository:

	.. sourcecode:: bash

	wget -qO - http://cloudstack.apt-get.eu/release.asc \| sudo apt-key add -

	If you're using your own package repository, change this line to
	read as appropriate for your \|version\| repository.

	#. Now update your apt package list:

	.. sourcecode:: bash

	$ sudo apt-get update

	#. Now that you have the repository configured, it's time to upgrade
	the ``cloudstack-management`` package.

	.. sourcecode:: bash

	$ sudo apt-get upgrade cloudstack-management

	#. If you use CloudStack usage server

	.. sourcecode:: bash

	$ sudo apt-get upgrade cloudstack-usage


	.. _rhel43:

	Management Server on CentOS/RHEL
	--------------------------------

	If you are using CentOS or RHEL, follow this procedure to upgrade your
	packages. If not, skip to hypervisors section, then :ref:`upg-sysvm43`.

	.. note::
	Community Packages: This section assumes you're using the community
	supplied packages for CloudStack. If you've created your own packages and
	yum repository, substitute your own URL for the ones used in these examples.

	.. include:: _mysql_connector.rst


	.. _rpm-repo43:

	CloudStack RPM repository
	^^^^^^^^^^^^^^^^^^^^^^^^^^

	The first order of business will be to change the yum repository
	for each system with CloudStack packages. This means all
	management servers, and any hosts that have the KVM agent.

	(No changes should be necessary for hosts that are running VMware or Xen.)

	Start by opening ``/etc/yum.repos.d/cloudstack.repo`` on any
	systems that have CloudStack packages installed.

	This file should have content similar to the following:

	.. sourcecode:: bash

	[apache-cloudstack]
	name=Apache CloudStack
	baseurl=http://cloudstack.apt-get.eu/rhel/4.3/
	enabled=1
	gpgcheck=0

	If you are using the community provided package repository, change
	the base url to ``http://cloudstack.apt-get.eu/centos/$releasever/4.9/``.

	Setup the GPG public key if you wish to enable ``gpgcheck=1``:

	.. sourcecode:: bash

	rpm --import http://cloudstack.apt-get.eu/RPM-GPG-KEY

	If you're using your own package repository, change this line to
	read as appropriate for your \|version\| repository.

	#. Remove the deprecated dependency for awsapi.

	.. sourcecode:: bash

	$ sudo rpm -e --nodeps cloudstack-awsapi

	#. Now that you have the repository configured, it's time to upgrade the
	``cloudstack-management``.

	.. sourcecode:: bash

	$ sudo yum upgrade cloudstack-management

	#. If you use CloudStack usage server

	.. sourcecode:: bash

	$ sudo yum upgrade cloudstack-usage


	Hypervisor: XenServer
	---------------------

	(XenServer only) Copy vhd-utils file on CloudStack management servers.
	Copy the file `vhd-utils <http://download.cloudstack.org/tools/vhd-util>`_
	to ``/usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver``.

	.. sourcecode:: bash

	wget -P /usr/share/cloudstack-common/scripts/vm/hypervisor/xenserver \
	http://download.cloudstack.org/tools/vhd-util

	.. include:: _xenserver_upg.rst


	Hypervisor: VMware
	------------------

	.. warning::
	For VMware hypervisor CloudStack management server packages must be
	build using "noredist". Refer to `Building from Source
	<http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/latest/building_from_source.html>`_.

	(VMware only) Additional steps are required for each VMware cluster.
	These steps will not affect running guests in the cloud. These steps
	are required only for clouds using VMware clusters:

	#. Stop the Management Server:

	.. sourcecode:: bash

	$ sudo service cloudstack-management stop

	#. Generate the encrypted equivalent of your vCenter password:

	.. sourcecode:: bash

	$ java -classpath /usr/share/cloudstack-common/lib/jasypt-1.9.2.jar org.jasypt.intf.cli.JasyptPBEStringEncryptionCLI encrypt.sh input="_your_vCenter_password_" password="`cat /etc/cloudstack/management/key`" verbose=false

	Store the output from this step, we need to add this in
	cluster\_details table and vmware\_data\_center tables in place of
	the plain text password

	#. Find the ID of the row of cluster\_details table that you have to
	update:

	.. sourcecode:: bash

	$ mysql -u <username> -p<password>

	.. sourcecode:: bash

	select * from cloud.cluster_details;

	#. Update the plain text password with the encrypted one

	.. sourcecode:: bash

	update cloud.cluster_details set value = '_ciphertext_from_step_1_' where id = _id_from_step_2_;

	#. Confirm that the table is updated:

	.. sourcecode:: bash

	select * from cloud.cluster_details;

	#. Find the ID of the correct row of vmware\_data\_center that you
	want to update

	.. sourcecode:: bash

	select * from cloud.vmware_data_center;

	#. update the plain text password with the encrypted one:

	.. sourcecode:: bash

	update cloud.vmware_data_center set password = '_ciphertext_from_step_1_' where id = _id_from_step_5_;

	#. Confirm that the table is updated:

	.. sourcecode:: bash

	select * from cloud.vmware_data_center;


	.. _kvm43:

	Hypervisor: KVM
	---------------

	KVM on Ubuntu
	^^^^^^^^^^^^^

	(KVM only) Additional steps are required for each KVM host. These
	steps will not affect running guests in the cloud. These steps are
	required only for clouds using KVM as hosts and only on the KVM
	hosts.

	#. Configure the :ref:`apt-repo43` as detailed above.

	#. Stop the running agent.

	.. sourcecode:: bash

	$ sudo service cloudstack-agent stop

	#. Update the agent software.

	.. sourcecode:: bash

	$ sudo apt-get upgrade cloudstack-agent

	#. Verify that the file ``/etc/cloudstack/agent/environment.properties`` has a
	line that reads:

	.. sourcecode:: bash

	paths.script=/usr/share/cloudstack-common

	If not, add the line.

	#. Start the agent.

	.. sourcecode:: bash

	$ sudo service cloudstack-agent start


	KVM on CentOS/RHEL
	^^^^^^^^^^^^^^^^^^

	For KVM hosts, upgrade the ``cloudstack-agent`` package

	#. Configure the :ref:`rpm-repo43` as detailed above.

	.. sourcecode:: bash

	$ sudo yum upgrade cloudstack-agent

	#. Verify that the file ``/etc/cloudstack/agent/environment.properties`` has a
	line that reads:

	.. sourcecode:: bash

	paths.script=/usr/share/cloudstack-common

	If not, add the line.

	#. Restart the agent:

	.. sourcecode:: bash

	$ sudo service cloudstack-agent stop
	$ sudo killall jsvc
	$ sudo service cloudstack-agent start


	Restart management services
	---------------------------

	#. Now it's time to start the management server

	.. sourcecode:: bash

	$ sudo service cloudstack-management start

	#. If you use it, start the usage server

	.. sourcecode:: bash

	$ sudo service cloudstack-usage start


	.. _upg-sysvm43:

	System-VMs and Virtual-Routers
	------------------------------

	.. include:: _sysvm_restart.rst


	.. include:: /global.rst