# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied.  See the License for the
# specific language governing permissions and limitations
# under the License.
#
msgid ""
msgstr ""
"Project-Id-Version: Apache CloudStack Administration Documentation 4\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2014-03-31 14:08-0400\n"
"PO-Revision-Date: 2017-03-22 22:16+0100\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: Babel 2.3.4\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: fr\n"
"X-Generator: Poedit 1.8.11\n"

# 4c134b7a710148a3ab2766ead2eecc37
#: ../../networking2.rst:18
msgid "Managing Networks and Traffic"
msgstr "Gérer les réseaux et le trafic"

# 3dea6f52fda445569cf65ce098c1b84c
#: ../../networking2.rst:20
msgid ""
"In a CloudStack, guest VMs can communicate with each other using shared "
"infrastructure with the security and user perception that the guests have a "
"private LAN. The CloudStack virtual router is the main component providing "
"networking features for guest traffic."
msgstr ""
"Dans CloudStack, les VMs invitées peuvent communiquer ensemble en utilisant les "
"infrastructures partagées avec la sécurité et la perception que les utilisateurs "
"ont un LAN privé. Le routeur virtuel CloudStack est le composant principal "
"fournissant les fonctionnalités réseaux pour le trafic invité."

# c845ad86dd2c41e091ae6234539d6672
#: ../../networking2.rst:26
msgid "Guest Traffic"
msgstr "Trafic invité"

# d8fc8ee73a5d4bc5915b1fd2e4eb7108
#: ../../networking2.rst:28
msgid ""
"A network can carry guest traffic only between VMs within one zone. Virtual "
"machines in different zones cannot communicate with each other using their IP "
"addresses; they must communicate with each other by routing through a public IP "
"address."
msgstr ""
"Un réseau peut transporter le trafic invité seulement entre VMs à l'intérieur "
"d'une zone. Les machines virtuelles de zones différentes ne peuvent pas "
"communiquer ensemble en utilisant leurs adresses IP ; elles doivent communiquer "
"avec les autres par le routage de leurs adresses IP publiques."

# e56f7eded9f441659c145763662800d5
#: ../../networking2.rst:33
msgid "See a typical guest traffic setup given below:"
msgstr "Voir une configuration typique du trafic invité ci dessous :"

# 6823c848cad04848a61dbff31215055b
#: ../../networking2.rst:35
msgid "|guest-traffic-setup.png|"
msgstr "|guest-traffic-setup.png|"

# 5cc5110f1ee142468aaacae83aca4060
#: ../../networking2.rst:37
msgid ""
"Typically, the Management Server automatically creates a virtual router for each "
"network. A virtual router is a special virtual machine that runs on the hosts. "
"Each virtual router in an isolated network has three network interfaces. If "
"multiple public VLAN is used, the router will have multiple public interfaces. "
"Its eth0 interface serves as the gateway for the guest traffic and has the IP "
"address of 10.1.1.1. Its eth1 interface is used by the system to configure the "
"virtual router. Its eth2 interface is assigned a public IP address for public "
"traffic. If multiple public VLAN is used, the router will have multiple public "
"interfaces."
msgstr ""
"Typiquement, le serveur de gestion crée automatiquement un routeur virtuel pour "
"chaque réseau. Un routeur virtuel est une machine virtuelle spéciale qui "
"fonctionne sur les hôtes. Chaque routeur virtuel dans un réseau isolé à trois "
"interfaces réseaux. Si plusieurs VLAN publics sont utilisés, le routeur aura "
"plusieurs interfaces publiques. Son interface eth0 servira de passerelle pour le "
"trafic invité et a comme adresse IP 10.1.1.1. Son interface eth1 est utilisée "
"par le système pour configurer le routeur virtuel. Son interface eth2 a une "
"adresse IP publique d'assignée pour le trafic publique. Si de multiples VLAN "
"publics sont utilisés, le routeur aura plusieurs interfaces publiques."

# b252663b377641b6a497a33ae549a1c3
#: ../../networking2.rst:48
msgid ""
"The virtual router provides DHCP and will automatically assign an IP address for "
"each guest VM within the IP range assigned for the network. The user can "
"manually reconfigure guest VMs to assume different IP addresses."
msgstr ""
"Le routeur virtuel fournit le service DHCP qui va automatiquement assigner une "
"adresse IP pour chaque VM invitée dans l'intervalle d'IP assignées au réseau. "
"L'utilisateur peut manuellement reconfigurer les VMs invités pour adopter "
"différentes adresses IP."

# 08366e677b394ff486de117a98b53a1c
#: ../../networking2.rst:53
msgid ""
"Source NAT is automatically configured in the virtual router to forward outbound "
"traffic for all guest VMs"
msgstr ""
"Le Source Nat est automatiquement configuré dans le routeur virtuel pour "
"transférer le trafic sortant de toutes les VMs invitées."

# 8db3692749f44d209bc4b6643b4bed42
#: ../../networking2.rst:57
msgid "Networking in a Pod"
msgstr "Le réseau dans un Pod"

# f92d73cb904740b69bb3044663745ef9
#: ../../networking2.rst:59
msgid ""
"The figure below illustrates network setup within a single pod. The hosts are "
"connected to a pod-level switch. At a minimum, the hosts should have one "
"physical uplink to each switch. Bonded NICs are supported as well. The pod-level "
"switch is a pair of redundant gigabit switches with 10 G uplinks."
msgstr ""
"L'image suivante illustre la configuration du réseau au sein d'un seul pod; Les "
"hôtes sont connectés à un commutateur de niveau pod. Au minimum, les hôtes "
"devraient avoir un lien montant vers chaque commutateur. Les agrégats "
"d'interfaces réseaux sont également supportés. Le commutateur du pod est une "
"pair de commutateurs gigabits redondants avec des liens à 10G."

# 3cf0b62b19c942899bbf90f9c3e111be
#: ../../networking2.rst:65
msgid "|networksinglepod.png|"
msgstr "|networksinglepod.png|"

# 61fa2a0f3f6046b2a1d038ab3e5ea255
#: ../../networking2.rst:67
msgid "Servers are connected as follows:"
msgstr "Les serveurs sont connectés comme ceci :"

# 9dd3a988270c471db1794e964c4a56c7
#: ../../networking2.rst:71
msgid ""
"Storage devices are connected to only the network that carries management "
"traffic."
msgstr ""
"Les périphériques de stockages ne sont connectés qu'au réseau qui transporte le "
"trafic de gestion."

# 2e2c8c8881fa4cd5be1de3eec14c1d1c
#: ../../networking2.rst:76
msgid ""
"Hosts are connected to networks for both management traffic and public traffic."
msgstr ""
"Les hôtes sont connectés aux réseaux pour à la fois le trafic de gestion et le "
"trafic publique."

# 3e2f4aed8c924b9e80395bdf1e1c2f73
#: ../../networking2.rst:81
msgid "Hosts are also connected to one or more networks carrying guest traffic."
msgstr ""
"Les hôtes sont aussi connectés à un ou plusieurs réseaux qui transportent le "
"trafic invité."

# d85f7dccd3784410a2b1d16863f27a73
#: ../../networking2.rst:84
msgid ""
"We recommend the use of multiple physical Ethernet cards to implement each "
"network interface as well as redundant switch fabric in order to maximize "
"throughput and improve reliability."
msgstr ""
"Nous recommandons l'utilisation de plusieurs cartes physique Ethernet qui "
"implémente chacune interface réseau comme une fabrique redondante de commutateur "
"dans le but d'optimiser le débit et améliorer la fiabilité."

# d776e46765c84e1181b3e580c688c626
#: ../../networking2.rst:89
msgid "Networking in a Zone"
msgstr "Le réseau dans une Zone"

# d239d21a20c649aba205a75b8c13f10d
#: ../../networking2.rst:91
msgid "The following figure illustrates the network setup within a single zone."
msgstr ""
"La figure suivante illustre la configuration du réseau au sein d'une seule zone."

# a576182d84c04ab98566ba031289abb1
#: ../../networking2.rst:93
msgid "|networksetupzone.png|"
msgstr "|networksetupzone.png|"

# f9ec1f6b949e428b918524444e4e4c2d
#: ../../networking2.rst:95
msgid ""
"A firewall for management traffic operates in the NAT mode. The network "
"typically is assigned IP addresses in the 192.168.0.0/16 Class B private address "
"space. Each pod is assigned IP addresses in the 192.168.\\*.0/24 Class C private "
"address space."
msgstr ""
"Un parefeu pour le trafic de gestion opère dans le mode NAT. Le réseau assigne "
"typiquement des adresses IP dans l'espace d'adressage du réseau privé de classe "
"B 192.168.0.0/16. Chaque pod se voit assigné des adresses IP dans l'espace privé "
"de classe C 192.168.\\*.0/24."

# f0acacb8a1ac4f92b32c742e22c0aa30
#: ../../networking2.rst:100
msgid ""
"Each zone has its own set of public IP addresses. Public IP addresses from "
"different zones do not overlap."
msgstr ""
"Chaque zone à son propre ensemble d'adresses IP publiques. Les adresses IP "
"publiques depuis différentes zones ne doivent pas se chevaucher."

# 48df0d18a8e448909a0b484414468735
#: ../../networking2.rst:104
msgid "Basic Zone Physical Network Configuration"
msgstr "Configuration du réseau physique d'une zone basique "

# 20494f4a5f604216bed0571fa51a7ddb
#: ../../networking2.rst:106
msgid ""
"In a basic network, configuring the physical network is fairly straightforward. "
"You only need to configure one guest network to carry traffic that is generated "
"by guest VMs. When you first add a zone to CloudStack, you set up the guest "
"network through the Add Zone screens."
msgstr ""
"Dans un réseau basique, configurer le réseau physique est assez simple. Vous "
"devez seulement configurer un réseau invité pour transporter le trafic généré "
"par les VMs invitées. Quand vous ajouter pour la première fois une zone à "
"CloudStack, vous configurer le réseau invité par les écrans Ajouter une zone."

# b5ca7152b69d4a2d8fcc434cb9267f7c
#: ../../networking2.rst:112
msgid "Advanced Zone Physical Network Configuration"
msgstr "Configuration du réseau physique d'une zone basique "

# 954218a2f4204be989c2436ecd73edc1
#: ../../networking2.rst:114
msgid ""
"Within a zone that uses advanced networking, you need to tell the Management "
"Server how the physical network is set up to carry different kinds of traffic in "
"isolation."
msgstr ""
"A l'intérieur d'une zone qui utilise le réseau avancé, vous devez dire au "
"serveur de gestion comment le réseau physique est configuré pour transporter "
"différents types de trafics isolés."

# b3ba0f73a0df4d36a3cb4f204c4dee2d
#: ../../networking2.rst:119
msgid "Configure Guest Traffic in an Advanced Zone"
msgstr "Configurer le trafic public dans une Zone Avancée"

# ecd9d16a0a0c4dff9373a2dbf58e4c09
#: ../../networking2.rst:121
msgid ""
"These steps assume you have already logged in to the CloudStack UI. To configure "
"the base guest network:"
msgstr ""
"Ces étapes assume que vous êtes déjà connecté dans l'interface CloudStack. Pour "
"configurer le réseau invité de base :"

# 78523deb5f20412383b00c879c3b21aa
#: ../../networking2.rst:126
msgid ""
"In the left navigation, choose Infrastructure. On Zones, click View More, then "
"click the zone to which you want to add a network."
msgstr ""
"Dans le menu de gauche, choisir Infrastructure. Dans Zones, cliquer sur Voir "
"Plus, puis cliquer sur la zone à laquelle vous voulez ajouter un réseau."

# 6257a61390924cb3bd8aeeac1a071780
# 991bb1da835442988405cc08b7001c28
# 61c9a678d28f40d599b72b6c2670f13d
#: ../../networking2.rst:131 ../../networking2.rst:215 ../../networking2.rst:1597
msgid "Click the Network tab."
msgstr "Cliquer sur l'onglet Réseau."

# 81ea8b8553864a83843ba71e6bf101af
# 2d5debf29d7e42428b6c6d0ea25b7b92
# e156f160e7c64f60a6d9c5bd8b8164a9
#: ../../networking2.rst:135 ../../networking2.rst:219 ../../networking2.rst:1601
msgid "Click Add guest network."
msgstr "Cliquer sur Ajouter un réseau invité."

# 7b664064e09a4c25ac5afbc839d6bf94
#: ../../networking2.rst:137
msgid "The Add guest network window is displayed:"
msgstr "La fenêtre Ajouter un réseau invité est affichée :"

# 467663954a4745be91a92b1d95b23080
#: ../../networking2.rst:139
msgid "|addguestnetwork.png|"
msgstr "|addguestnetwork.png|"

# a7bd588835354863bf7622de307358f6
# e19b9c5096354c629c5cb237adbb7845
# d0d70642a5104df08ab13289bdd0c02b
#: ../../networking2.rst:143 ../../networking2.rst:4200 ../../networking2.rst:5082
msgid "Provide the following information:"
msgstr "Fournir l'information suivante :"

# 02150922f26d47f3b7a13ca653f96421
#: ../../networking2.rst:147
msgid "**Name**. The name of the network. This will be user-visible"
msgstr "**Nom** : Le nom du réseau. Cela sera visible de l'utilisateur."

# 71b93ff5fc154455a9e31bb96fc71d72
#: ../../networking2.rst:151
msgid "**Display Text**: The description of the network. This will be user-visible"
msgstr ""
"**Texte affiché**: La description du réseau. Cela sera visible de l'utilisateur."

# 3aa2ff94b2f3453caf3cf8a60cf57294
#: ../../networking2.rst:156
msgid "**Zone**: The zone in which you are configuring the guest network."
msgstr ""
"**Zone** : La zone pour laquelle vous êtes en train de configurer le réseau "
"invité."

# 8020d9a242d94611b622a7fbbf730632
#: ../../networking2.rst:160
msgid ""
"**Network offering**: If the administrator has configured multiple network "
"offerings, select the one you want to use for this network"
msgstr ""
"**Offre réseau** : Si l'administrateur a configuré plusieurs offres de réseau, "
"sélectionnez celle que vous voulez utiliser pour ce réseau."

# 409cf198865e4ed4a4ceda18fb9c08f8
#: ../../networking2.rst:165
msgid "**Guest Gateway**: The gateway that the guests should use"
msgstr "**Passerelle invitée** : La passerelle que les invités devraient utiliser."

# 1b24f9a1dc1a468fa60412939100a476
#: ../../networking2.rst:169
msgid "**Guest Netmask**: The netmask in use on the subnet the guests will use"
msgstr ""
"**Masque de sous réseau invité** : Le masque de sous réseau utilisé sur le sous "
"réseau que les invités vont utiliser."

# 91173c96c5184ed8a0542f56f340c125
# 6968c572935348d89aa2cfe9419c00cd
# 9ee0ac806d854e47bd3f486e9e128034
# 5d45344f6070463bb25599b8c1ac7145
# 0527e80fdbfe4508a05ede62a047cd51
# c6016b8b267942548713429d3c7e74e0
# 3ccbb578962b42588bd495e0dbd57f76
# f5954071e2a24961b74b3dcca98a33b1
# e6ab2eac57564f63bfeea06d1691c574
# 6d9b635b27544fb3adc30d7e8bc3070b
# aae381906435443489b7db544138dc66
# 0218e655795843808690f324bad3bbf9
# 2c8c3e70a3904e0fb57a195a43305818
# bc97ad0f132944ffbb337c4649b00a51
#: ../../networking2.rst:174 ../../networking2.rst:870 ../../networking2.rst:1251
#: ../../networking2.rst:1428 ../../networking2.rst:1755 ../../networking2.rst:3144
#: ../../networking2.rst:3662 ../../networking2.rst:4319 ../../networking2.rst:4355
#: ../../networking2.rst:5118 ../../networking2.rst:5211 ../../networking2.rst:5458
#: ../../networking2.rst:5499 ../../networking2.rst:6953
msgid "Click OK."
msgstr "Cliquez sur OK."

# bb8994cf25ed4d0f9c1738b0a288a66d
#: ../../networking2.rst:177
msgid "Configure Public Traffic in an Advanced Zone"
msgstr "Configurer le trafic public dans une Zone Avancée"

# 53d266b50a684d08b2b57469d0ba2117
#: ../../networking2.rst:179
msgid ""
"In a zone that uses advanced networking, you need to configure at least one "
"range of IP addresses for Internet traffic."
msgstr ""
"Dans une zone qui utilise un réseau avancé, vous devez configurer au moins une "
"plage d'adresses IP pour le trafic Internet. "

# 173ecef5b8d34d51b8690fdff5bcfc1f
#: ../../networking2.rst:183
msgid "Configuring a Shared Guest Network"
msgstr "Configurer un réseau invité partagé"

# 93a4d181244541b381a3a70d1daea74e
# 55cf11dd995e463eb0015820a7998825
# 648d4dddf66542dd975f89802e4efaec
#: ../../networking2.rst:187 ../../networking2.rst:761 ../../networking2.rst:1569
msgid "Log in to the CloudStack UI as administrator."
msgstr "Se connecter à l'interface de CloudStack comme administrateur."

# ef46dafa14464c0580eef19b6347e754
# f88933a8ce404a74b4dbfb012972639e
# 1a1e2e9b76e842d2ad6653556d716440
#: ../../networking2.rst:191 ../../networking2.rst:1363 ../../networking2.rst:1573
msgid "In the left navigation, choose Infrastructure."
msgstr "Dans le panneau de navigation à gauche, choisir Infrastructure."

# e6266ec66e47425eaefdebd94b55e3d6
# 9b6fa85ad73145c2a68b917e13c4dd74
#: ../../networking2.rst:195 ../../networking2.rst:1577
msgid "On Zones, click View More."
msgstr "Dans zones, cliquez sur Voir tout."

# ae18ac4302694c399605762c754adc89
# a83fd7a01a4d4702815c49eabf8d6f45
#: ../../networking2.rst:199 ../../networking2.rst:1581
msgid "Click the zone to which you want to add a guest network."
msgstr "Cliquer sur la zone à laquelle vous voulez ajouter un réseau invité."

# 35ace6a71a514813adb835b0e291e59a
# 92a70044e0a64276aca71c727238658c
# e7a6054e0cac452abbdf14af1fcf9ab7
# 1dc7e2ce80f242c792c3eadfdf57d1f8
#: ../../networking2.rst:203 ../../networking2.rst:777 ../../networking2.rst:898
#: ../../networking2.rst:1585
msgid "Click the Physical Network tab."
msgstr "Cliquer sur l'onglet Réseau Physique."

# 7d1c35e3c6fb45268f88743d4f33fc4a
# 5d24c24102dc463b8df955cea14e8321
#: ../../networking2.rst:207 ../../networking2.rst:1589
msgid "Click the physical network you want to work with."
msgstr "Cliquer sur le réseau physique avec lequel vous voulez travailler."

# d69f9202aba443119708b15355371054
# b50eb62ce8e94fdf956d6c49a9d8c539
#: ../../networking2.rst:211 ../../networking2.rst:1593
msgid "On the Guest node of the diagram, click Configure."
msgstr "Sur le noeud Invité du diagramme, cliquer sur Configurer."

# 61f94d523e2b4257ac005b54b2300cd1
# e69e4aa9dc5d4b77b59760f32d4410e5
#: ../../networking2.rst:221 ../../networking2.rst:1603
msgid "The Add guest network window is displayed."
msgstr "La fenêtre Ajouter un réseau invité est affichée :"

# 4af18c5d61a6456caf73f7a9369e2fee
# cd3004192b7247d6b3d8df85d071c687
# cefbbdc700e1418791c24fa0e9ff9991
# 7d7d79ee61514455a6bd14b72d23c697
# 9eddccf9e3ed490ba485fed483665910
# ad7396c2fa194389a72869772975a651
# ba22f3a686da4d51be0844159353ec45
# 813ce0c39bee45a6b48988f7b8abcccd
# 49c644d753054859b04b0040656835a6
# 6851774e7c7b4a888987619af18e594a
# 5bb2026725a84546bbf11325cca1e760
# ca837cbb6534464a8d34b465a79f3b42
# 1766498324004d1b9d70c399f1671335
# 3fcb97db48704b65b73bdf48cfc719df
#: ../../networking2.rst:225 ../../networking2.rst:806 ../../networking2.rst:822
#: ../../networking2.rst:856 ../../networking2.rst:916 ../../networking2.rst:1227
#: ../../networking2.rst:1400 ../../networking2.rst:1607 ../../networking2.rst:2480
#: ../../networking2.rst:3177 ../../networking2.rst:5166 ../../networking2.rst:5592
#: ../../networking2.rst:6347 ../../networking2.rst:6741
msgid "Specify the following:"
msgstr "Spécifier les informations suivantes :"

# 8779be8d9d6846f085dbce3da3461bc3
# b0b915aaeb67486684b659dc291d6454
#: ../../networking2.rst:229 ../../networking2.rst:1611
msgid "**Name**: The name of the network. This will be visible to the user."
msgstr "**Nom** : Le nom du réseau. Cela sera visible de l'utilisateur."

# 5074f17c728f4f3a8a7f794e8374c034
# 0a5db820304048068d1845c134b8df63
#: ../../networking2.rst:234 ../../networking2.rst:1616
msgid ""
"**Description**: The short description of the network that can be displayed to "
"users."
msgstr ""
"**Description** : La description courte du réseau qui peut être affichée aux "
"utilisateurs."

# 2b82a4bc6aa046f3b00d043934c959d7
# 41c1edb5305a4945842709a1c5cf1ad6
#: ../../networking2.rst:239 ../../networking2.rst:1621
msgid "**VLAN ID**: The unique ID of the VLAN."
msgstr "**ID VLAN** : L'ID unique du VLAN."

# 418bb2fcab5742fb987163b73807d96b
#: ../../networking2.rst:243
msgid "**Isolated VLAN ID**: The unique ID of the Secondary Isolated VLAN."
msgstr "**ID du VLAN isolé** : L'ID unique du VLAN secondaire isolé."

# f26b6b49568f43ac84898deb5855609f
# 969c263588994f74ac62592a499a4b31
#: ../../networking2.rst:248 ../../networking2.rst:1633
msgid "**Scope**: The available scopes are Domain, Account, Project, and All."
msgstr "**Portée** : Les portées possibles sont Domaine, Compte, Projet et Tous."

# 178c532fedf44f0fb1a2993bf0f625a0
# 15faa541a4ce4327913cfce7e0c3f217
#: ../../networking2.rst:253 ../../networking2.rst:1638
msgid ""
"**Domain**: Selecting Domain limits the scope of this guest network to the "
"domain you specify. The network will not be available for other domains. If you "
"select Subdomain Access, the guest network is available to all the sub domains "
"within the selected domain."
msgstr ""
"**Domaine** : Sélectionner Domaine limite la portée de ce réseau invité au "
"domaine que vous spécifiez. Le réseau ne sera pas disponible pour les autres "
"domaines.Si vous sélectionnez Accès Sous Domaine, le réseau invité est "
"disponible à tous les sous domaines au sein du domaine sélectionné."

# 91422a2eb500489a88e0a6f4b976e5c8
# eb7d195938c445079e17b8d4de34c9b0
#: ../../networking2.rst:261 ../../networking2.rst:1646
msgid ""
"**Account**: The account for which the guest network is being created for. You "
"must specify the domain the account belongs to."
msgstr ""
"**Compte** : Le compte pour lequel le réseau invité est créé. Vous devez "
"spécifier le domaine auquel appartient le compte."

# acbed03163c746f394f0b6065ac5d267
# b6481103a23442a698dd33a8241fd4a5
#: ../../networking2.rst:267 ../../networking2.rst:1652
msgid ""
"**Project**: The project for which the guest network is being created for. You "
"must specify the domain the project belongs to."
msgstr ""
"**Projet** : Le projet pour lequel le réseau invité est créé. Vous devez "
"spécifier le domaine auquel le projet appartient."

# 7515546501ea4a229f3d24cb1957114c
# 14055c49cff34a97af7586b6692b395f
#: ../../networking2.rst:273 ../../networking2.rst:1658
msgid ""
"**All**: The guest network is available for all the domains, account, projects "
"within the selected zone."
msgstr ""
"**Tous** : Le réseau invité est disponible pour tous les domaines, comptes, "
"projets au sein de la zone sélectionnée."

# 9e7d75c438d04916a6c8e41212a5add4
# d311a00faddf44fb969a7362e8525846
#: ../../networking2.rst:278 ../../networking2.rst:1663
msgid ""
"**Network Offering**: If the administrator has configured multiple network "
"offerings, select the one you want to use for this network."
msgstr ""
"**Offre réseau** : Si l'administrateur a configuré plusieurs offres de réseau, "
"sélectionnez celle que vous voulez utiliser pour ce réseau."

# 3b34a00342f74aabb8f06ef47a71928f
# cec7265b43cc44c985fc19c1aada24ca
#: ../../networking2.rst:284 ../../networking2.rst:1669
msgid "**Gateway**: The gateway that the guests should use."
msgstr "**Passerelle** : La passerelle que les invités devraient utiliser."

# e8b1ed0c13f24b28b17097da6a906553
# e376b4730d514e9cb67f58490f5323da
#: ../../networking2.rst:288 ../../networking2.rst:1673
msgid "**Netmask**: The netmask in use on the subnet the guests will use."
msgstr ""
"**Masque de sous réseau** : Le masque de sous réseau du réseau que les "
"utilisateurs vont utiliser."

# e95322f93824448f8b5213679edb09a1
# f9867bf0fe584ea68c8d8697b398a35d
#: ../../networking2.rst:292 ../../networking2.rst:1677
msgid ""
"**IP Range**: A range of IP addresses that are accessible from the Internet and "
"are assigned to the guest VMs."
msgstr ""
"**Plage IP** : Une plage d'adresses IP qui sont accessibles depuis l'Internet "
"est qui sont assignées aux VMs invitées."

# e30dfcdbb56b4fdab7ac50d318f8cfee
#: ../../networking2.rst:295
msgid ""
"If one NIC is used, these IPs should be in the same CIDR in the case of IPv6."
msgstr ""
"Si une interface est utilisée, ces IP devrait être dans le même CIDR dans le cas "
"de l'IPv6."

# c999c7758e4644bb960bd36b4934a153
#: ../../networking2.rst:300
msgid ""
"**IPv6 CIDR**: The network prefix that defines the guest network subnet. This is "
"the CIDR that describes the IPv6 addresses in use in the guest networks in this "
"zone. To allot IP addresses from within a particular address block, enter a CIDR."
msgstr ""
"**IPv6 CIDR** : Le préfixe réseau qui défini le sous réseau du réseau invité. "
"C'est le CIDR qui décrit les adresses IPv6 en usage dans les réseaux invités de "
"cette zone. Pour autoriser les adresses IP depuis un bloc d'adresse particulier, "
"entrer un CIDR."

# 06222d5aca4f4401b3e50b9562eafd93
# bdec8ee29ad7416da22dd28dfee5836c
#: ../../networking2.rst:307 ../../networking2.rst:1682
msgid ""
"**Network Domain**: A custom DNS suffix at the level of a network. If you want "
"to assign a special domain name to the guest VM network, specify a DNS suffix."
msgstr ""
"**Domaine Réseau** : Un suffixe DNS personnalisé au niveau du réseau. Si vous "
"voulez assigner un nom de domaine spécial au réseau des VM invitées, spécifier "
"un suffixe DNS."

# 6cbf270deb434c49a37109538320e729
# e3f042ecf42f48179722b1f43ed74365
# 6a7ddea8dd2248ce9c184a2ecb2a727c
# 3048777b2bf143b7b0cf2d931ebf1461
# 007a1927e30b4659b6f5b8dad349a236
#: ../../networking2.rst:313 ../../networking2.rst:1688 ../../networking2.rst:3215
#: ../../networking2.rst:3256 ../../networking2.rst:4559
msgid "Click OK to confirm."
msgstr "Cliquer OK pour confirmer."

# 6dae7352ba9441b4ab5afb0eb736de8e
#: ../../networking2.rst:316
msgid "Using Multiple Guest Networks"
msgstr "Utiliser plusieurs Réseaux d'Invités "

# 2b127f6d5dfd4f3aa7e896c69fa530fc
#: ../../networking2.rst:318
msgid ""
"In zones that use advanced networking, additional networks for guest traffic may "
"be added at any time after the initial installation. You can also customize the "
"domain name associated with the network by specifying a DNS suffix for each "
"network."
msgstr ""
"Dans les zones qui utilisent le réseau avancé, des réseaux additionnels pour le "
"trafic invité peuvent être ajouté à n'importe quel moment après l'installation "
"initiale. Vous pouvez aussi personnaliser le nom de domaine associé avec le "
"réseau en spécifiant un suffix DNS pour chaque réseau."

# 57493d5abb6d42e29119db9cfbd72df0
#: ../../networking2.rst:323
msgid ""
"A VM's networks are defined at VM creation time. A VM cannot add or remove "
"networks after it has been created, although the user can go into the guest and "
"remove the IP address from the NIC on a particular network."
msgstr ""
"Les réseaux d'une VM sont définie à la création de la VM. Une VM ne peut pas "
"ajouter ou supprimer des réseaux après qu'elle ait été créée, bien que "
"l'utilisateur peut aller dans son inviter et supprimer l'adresse IP sur la carte "
"réseau d'un réseau particulier."

# df560b1f84f74fa096be5526e9f253c2
#: ../../networking2.rst:328
msgid ""
"Each VM has just one default network. The virtual router's DHCP reply will set "
"the guest's default gateway as that for the default network. Multiple non-"
"default networks may be added to a guest in addition to the single, required "
"default network. The administrator can control which networks are available as "
"the default network."
msgstr ""
"Chaque VM a juste un réseau par défaut. La réponse du serveur DHCP du routeur "
"virtuel configurera la passerelle par défaut de l'invité comme ça pour le réseau "
"par défaut. Plusieurs réseaux qui ne sont pas par défaut peuvent être ajoutés à "
"un invité en complément du seul réseau, ce qui nécessite le réseau par défaut. "
"L'administrateur peut contrôler quels réseaux sont disponible comme réseau par "
"défaut."

# 1b89ed0c211f490d9ab7e3873f785995
#: ../../networking2.rst:334
msgid ""
"Additional networks can either be available to all accounts or be assigned to a "
"specific account. Networks that are available to all accounts are zone-wide. Any "
"user with access to the zone can create a VM with access to that network. These "
"zone-wide networks provide little or no isolation between guests.Networks that "
"are assigned to a specific account provide strong isolation."
msgstr ""
"Des réseaux supplémentaire peuvent être disponible pour tous les comptes ou être "
"assigné à un compte spécifique. Les réseaux qui sont disponibles à tous les "
"comptes sont à l'échelle de la zone. Tout utilisateur avec un accès à la zone "
"peut créer une VM avec un accès à ce réseau. Ces réseaux à l'échelle de la zone "
"fournissent un peu ou pas du tout d'isolation entre les invités. Les réseaux qui "
"sont assignés à un compte spécifique fournissent une isolation plus solide."

# 03479d92c4f3472fbf1c837f78ae38b9
#: ../../networking2.rst:342
msgid "Adding an Additional Guest Network"
msgstr "Ajouter un réseau invité supplémentaire"

# dcc9b20e05d94a90a82df638e638d914
# bf1857069dbe437da757dd8117d7a8f6
# b00f09bd670c4e6bb6a9d90b98d3ee27
# 06d1f9568c404045a154fa7800b17b42
# 3a1cc0396efd4b8ebd8a6128932f37f3
# ded02e7a4c5d4431a40e7c763efe892e
# 2bf9437aec83464ca8aa33fb4d5bc7d2
# 474cb61b7d6d414bb525496395e11ac0
# cf958678b40649e395bf748ed3a82341
# c6386d8cdb7f4830ac34eb0e3d53d353
# e419b4e20de34ab59ca3fd7119a6a509
# cb96251ca7834bcfb93698899e36997c
# c24de51d817f4b8b86aa10d3c56327e6
# 1970352df0b24327ab0040b0248447d1
# b69b28bceebf484d9240513871a69e53
# efd7ff6f49f24baebd8a7054ca0fcb6a
# 855b8ad33e0942859a9fb87da979bff6
# b853131f26c84398bd3ab3b28e7c8c10
# 0415ee973c9e4f138f81c716a5897661
# a2d18d98840548f1994851b84a11d06b
# dafb981c4cd44ff284f9609a6d78076f
# 8b5b3770bbea4a4b91bce618eaa95579
# 0f348eefc7a140f0bfa10c40ab0de750
# 20e4bf643dc649a5adf2b96c98aad755
# 229dd2bf881340558fca0975604b2643
# 470f52bcfa37419386c12e3c2112f795
# bbf8e4596d4c4216a94cb7fd144372c1
# bbeffb28c2c749518103fe11d941e8f3
# 910d29d282334e13b2f84bdba7e4ae2f
# d94ff6f14e7643a9832ac593d1c69ffb
# 534c0a26f9b24f54a399020a1716f7ed
# e92cc9d2cd1d448e9f9d848b7a0f8851
# a96d8dddd84c4103b8b7afff0db24cfe
# e307dc8da8084a23951ba5a0f61c85d4
# 538a9fc2f7b941d8831cf7952f1eac3f
# a6c65c894c464e4f928395582357dc97
# 786b76e0eb6b4cadba166292663da2ea
# 6530063879054b16a643c0b8d345a236
#: ../../networking2.rst:346 ../../networking2.rst:413 ../../networking2.rst:478
#: ../../networking2.rst:509 ../../networking2.rst:543 ../../networking2.rst:688
#: ../../networking2.rst:1205 ../../networking2.rst:1258 ../../networking2.rst:1359
#: ../../networking2.rst:1735 ../../networking2.rst:1815 ../../networking2.rst:2210
#: ../../networking2.rst:3284 ../../networking2.rst:3327 ../../networking2.rst:3370
#: ../../networking2.rst:3444 ../../networking2.rst:3548 ../../networking2.rst:3695
#: ../../networking2.rst:3829 ../../networking2.rst:4184 ../../networking2.rst:4329
#: ../../networking2.rst:4362 ../../networking2.rst:4459 ../../networking2.rst:4650
#: ../../networking2.rst:5066 ../../networking2.rst:5131 ../../networking2.rst:5262
#: ../../networking2.rst:5344 ../../networking2.rst:5513 ../../networking2.rst:5752
#: ../../networking2.rst:5843 ../../networking2.rst:5931 ../../networking2.rst:6022
#: ../../networking2.rst:6265 ../../networking2.rst:6575 ../../networking2.rst:6659
#: ../../networking2.rst:6784 ../../networking2.rst:6823
msgid "Log in to the CloudStack UI as an administrator or end user."
msgstr ""
"Se connecter à l'interface de CloudStack comme administrateur ou utilisateur "
"final."

# c650c895a3ac4ff2851197288859be98
# 65e8807d38054bd1b0027a7155f8085f
# 6cbdfa0e6a0e46cdab35e3223f504119
# 2f9490cb25514f8283f8dec06a79102d
# 5563fe265c1a429d967cda0edab813f4
# 54d9e12cb3164286a92aceeba0a664e5
# 612ff33bd3f84bdd84ef63b9c3cb6cf3
# 6fc81420daf44701856963aa3d9f4a87
# 07cefb7f05bc4714bf198cbd879aea33
# ab72dbc455b843cfb4c72e923297fc4d
# 2e8cbb1231ef43fb9b387b21b0f97305
# 9cb098264bbf4fc79077a14d44ff4e4d
# ceb0f3b90cd2499b89cc614d577384d9
# f15f55387b954e10a6e5a4417bfa6071
# c298749dee624dae9ac00c5329f45af3
# e222d654cbbb4a0a9bfcec6a887925e2
# aa6ece8cd97543d091148cc4a9db4c04
# 412366a772fc462991958a94917d88ee
# e838e4d54a33420fad3f9b5aac4181ea
# ef4b5d8b2c1f4efcb1dcb0909dd0610b
# fb954e22b2e247cfbf72c9525d556f10
# e9064194f98e4db6bb1374bc04afd258
# da3f29bc5aa344e99d840c524c97ff52
# 931799f15e4f4ef78f34f77acc6a84a5
# 0035008431074c10b6f9cdcd88cf746a
# 7a1970bdf40a45d3acd7f9db64c34c2f
# f9b9878b284a440380845f18adc4dc02
# 1108ad1b0aa449c198fc5fbf7b2f6f72
# cea2011545724bc2b72940d23a00d3d7
#: ../../networking2.rst:350 ../../networking2.rst:553 ../../networking2.rst:692
#: ../../networking2.rst:1262 ../../networking2.rst:2214 ../../networking2.rst:3288
#: ../../networking2.rst:3331 ../../networking2.rst:3374 ../../networking2.rst:3448
#: ../../networking2.rst:3552 ../../networking2.rst:4188 ../../networking2.rst:4333
#: ../../networking2.rst:4366 ../../networking2.rst:4463 ../../networking2.rst:4654
#: ../../networking2.rst:5070 ../../networking2.rst:5135 ../../networking2.rst:5266
#: ../../networking2.rst:5348 ../../networking2.rst:5517 ../../networking2.rst:5756
#: ../../networking2.rst:5847 ../../networking2.rst:5935 ../../networking2.rst:6026
#: ../../networking2.rst:6269 ../../networking2.rst:6579 ../../networking2.rst:6663
#: ../../networking2.rst:6788 ../../networking2.rst:6827
msgid "In the left navigation, choose Network."
msgstr "Dans la navigation à gauche, choisissez Réseau."

# f6aa7a61ff37420d9f141635bdbce188
#: ../../networking2.rst:354
msgid "Click Add guest network. Provide the following information:"
msgstr "Cliquer sur Ajouter un réseau invité. Donner les informations suivantes :"

# 94e3451e541243a590fc75a1c6838168
#: ../../networking2.rst:358
msgid "**Name**: The name of the network. This will be user-visible."
msgstr "**Nom** : Le nom du réseau. Cela sera visible de l'utilisateur."

# 24a87a4d530b4a8c9af892bd51a53c2b
#: ../../networking2.rst:362
msgid ""
"**Display Text**: The description of the network. This will be user-visible."
msgstr ""
"**Texte affiché**: La description du réseau. Cela sera visible de l'utilisateur."

# 4491ce6396264b9f805777eca895a720
#: ../../networking2.rst:367
msgid ""
"**Zone**. The name of the zone this network applies to. Each zone is a broadcast "
"domain, and therefore each zone has a different IP range for the guest network. "
"The administrator must configure the IP range for each zone."
msgstr ""
"**Zone**. Le nom de la zone à laquelle le réseau s'applique. Chaque zone est un "
"domaine de diffusion, et par conséquent, chaque zone a une plage d'IP différente "
"comme réseau d'invité. L'administrateur doit configurer la plage d'IP pour "
"chaque zone."

# 738c6e4f1dac40f6ae58cfa12e3fafb6
#: ../../networking2.rst:374
msgid ""
"**Network offering**: If the administrator has configured multiple network "
"offerings, select the one you want to use for this network."
msgstr ""
"**Offre réseau** : Si l'administrateur a configuré plusieurs offres de réseau, "
"sélectionnez celle que vous voulez utiliser pour ce réseau."

# 4d5b30b8ae754940bd24bf9ce873f62c
#: ../../networking2.rst:380
msgid "**Guest Gateway**: The gateway that the guests should use."
msgstr "**Passerelle invitée** : La passerelle que les invités devraient utiliser."

# d2cc46c6e57d4a74b0f41b06645d7905
#: ../../networking2.rst:384
msgid "**Guest Netmask**: The netmask in use on the subnet the guests will use."
msgstr ""
"**Masque de sous réseau invité** : Le masque de sous réseau utilisé sur le sous "
"réseau que les invités vont utiliser."

# 0eef322a01b1441c968f5d08a7d1205d
# 0fd1c8972f504925a86019b475f8cf7a
#: ../../networking2.rst:389 ../../networking2.rst:4032
msgid "Click Create."
msgstr "Cliquez sur Créer."

# de4eb821eff84801b56973e967b9870e
#: ../../networking2.rst:392
msgid "Reconfiguring Networks in VMs"
msgstr "Reconfigurer les Réseaux dans les VMs"

# 0f2fe4ab745e4f7fb65fe812f7d64f1a
#: ../../networking2.rst:394
msgid ""
"CloudStack provides you the ability to move VMs between networks and reconfigure "
"a VM's network. You can remove a VM from a network and add to a new network. You "
"can also change the default network of a virtual machine. With this "
"functionality, hybrid or traditional server loads can be accommodated with ease."
msgstr ""
"CloudStack vous offre la possibilité de déplacer des VMs d'un réseau à un autre "
"et de reconfigurer son réseau. Vous pouvez retirer une VM d'un réseau et "
"l'ajouter à un nouveau réseau. Vous pouvez aussi changer le réseau par défaut "
"d'une machine virtuelle. Avec cette fonctionnalité, les charges d'un serveur "
"traditionnel ou hybride peut être facilement adapté."

# 74ad1316798b4f60a8f0033d2c970d86
#: ../../networking2.rst:400
msgid "This feature is supported on XenServer, VMware, and KVM hypervisors."
msgstr ""
"Cette fonctionnalité est supportée sur les hyperviseurs XenServer, VMware et KVM."

# 65c68a2b86274b91a6ec6ed32d0eb511
# b0f423eb9e1444fa8072955fb8cbe955
# c9a7dedb4fe74538a84d59bba4b0ea21
#: ../../networking2.rst:403 ../../networking2.rst:1526 ../../networking2.rst:2416
msgid "Prerequisites"
msgstr "Prérequis"

# bc2166808aa14a3d84e34f7a073eda9b
#: ../../networking2.rst:405
msgid ""
"Ensure that vm-tools are running on guest VMs for adding or removing networks to "
"work on VMware hypervisor."
msgstr ""
"S'assurer que les vm-tools fonctionnent sur les VMs invités pour ajouter ou "
"retirer les réseaux pour que cela fonctionne sur les hyperviseur VMware."

# 5edc5eb13c714fdcb4bc76dfefee938a
#: ../../networking2.rst:409
msgid "Adding a Network"
msgstr "Ajouter un réseau"

# e9c46729b8e44e9b86983fc1d062228c
# 69e1fa7916874968ad5f68de2af2cbc4
# 53892275c4d84a16b7aa19e912822afe
#: ../../networking2.rst:417 ../../networking2.rst:482 ../../networking2.rst:513
msgid "In the left navigation, click Instances."
msgstr "Sur la gauche, cliquez sur Instances"

# 237aa96a8b6047e2abb22526bd4bac7c
# 2b3f21ea21b24697b7196dc8f6846009
# 274e34eca30542b289b9dccb8063fa1f
#: ../../networking2.rst:421 ../../networking2.rst:486 ../../networking2.rst:517
msgid "Choose the VM that you want to work with."
msgstr "Choisir la VM avec laquelle vous voulez travailler."

# a616e6054be2484499468033d21dea1c
# 7df447c421184ebd8362e78e05a81058
# 57cb30b5f480462abef7c6f73b23f46e
#: ../../networking2.rst:425 ../../networking2.rst:490 ../../networking2.rst:521
msgid "Click the NICs tab."
msgstr "Cliquer sur l'onglet Interface."

# dccdbd5be35b43fda6baf17f2c628af7
#: ../../networking2.rst:429
msgid "Click Add network to VM."
msgstr "Cliquer sur Ajouter un réseau à une VM."

# 05af00bbbfae48b0869d614090792531
#: ../../networking2.rst:431
msgid "The Add network to VM dialog is displayed."
msgstr "La boîte de dialogue Ajouter un réseau à une VM est affichée."

# 9d15b4dcf3c8457785334338c368aa26
#: ../../networking2.rst:435
msgid ""
"In the drop-down list, select the network that you would like to add this VM to."
msgstr ""
"Dans la liste déroulante, sélectionner le réseau que vous aimeriez ajouter à "
"cette VM."

# 9747107d35eb413e81aa96529adf5506
#: ../../networking2.rst:438
msgid ""
"A new NIC is added for this network. You can view the following details in the "
"NICs page:"
msgstr ""
"Une nouvelle interface réseau est ajoutée pour ce réseau. Vous pouvez voir les "
"détails suivants dans la page de l'interface :"

# 96ffcc74f3da41ee9f7fade2c284e2cc
#: ../../networking2.rst:443
msgid "ID"
msgstr "ID"

# 0930c07f915e4e8f8321b47ce1b2546c
#: ../../networking2.rst:447
msgid "Network Name"
msgstr "Nom du réseau"

# 2166ea3836e64777968d20d97a551782
#: ../../networking2.rst:451
msgid "Type"
msgstr "Type"

# ebba5967ce5b40c6a4b9557338f01ce6
# 3d4b724e0c8241c1ba31b6395bc04008
# 5af256fd3dbb4fdd841ef05a4ec9b838
#: ../../networking2.rst:455 ../../networking2.rst:4442 ../../networking2.rst:4567
msgid "IP Address"
msgstr "Adresse IP"

# a5e87e2a4b4d4ddd80f323f49ceee587
# ad200504779f4909905c825a837ecb20
#: ../../networking2.rst:459 ../../networking2.rst:4571
msgid "Gateway"
msgstr "Passerelle"

# b15a081ce5664e48891a6f018aa8f161
#: ../../networking2.rst:463
msgid "Netmask"
msgstr "Masque de sous-réseau"

# 297b7172628240e1a2c5b8cabc302f62
#: ../../networking2.rst:467
msgid "Is default"
msgstr "Par défaut ?"

# 8a2efed9a7e74c7f9fe0f1d5eb5d090c
#: ../../networking2.rst:471
msgid "CIDR (for IPv6)"
msgstr "CIDR (pour IPv6)"

# 9398952782e64b64b3867a3fe12fd7bc
#: ../../networking2.rst:474
msgid "Removing a Network"
msgstr "Supprimer un réseau"

# a093eadb6ac145cbae36f5faaaa2c9a1
#: ../../networking2.rst:494
msgid "Locate the NIC you want to remove."
msgstr "Repérer l'interface que vous voulez retirer."

# 5785d874c0944a0caf08db20f4f9e446
#: ../../networking2.rst:498
msgid "Click Remove NIC button. |remove-nic.png|"
msgstr "Cliquer sur le bouton Supprimer une interface. |remove-nic.png|"

# c2771766c44443d1bb463bd5a0f9ecef
# ed60114d9fff4ae6871302c0c6b0aed2
#: ../../networking2.rst:502 ../../networking2.rst:533
msgid "Click Yes to confirm."
msgstr "Cliquer sur Oui pour confirmer."

# 6b25b8b44f294113afdfb3b97d2eac02
#: ../../networking2.rst:505
msgid "Selecting the Default Network"
msgstr "Sélectionner le réseau par défaut."

# 86d95a73e3274acc9285a47537212537
#: ../../networking2.rst:525
msgid "Locate the NIC you want to work with."
msgstr "Repérer l'interface avec laquelle vous voulez travailler."

# 998ed551fd1a45f4ac897f9f38552afe
#: ../../networking2.rst:529
msgid "Click the Set default NIC button. |set-default-nic.png|."
msgstr ""
"Cliquer sur le bouton Définir une interface par défaut. |set-default-nic.png|."

# df5fbaabb7364cf599673d6b129dc3a4
#: ../../networking2.rst:536
msgid "Changing the Network Offering on a Guest Network"
msgstr "Changer l'offre de réseau pour un réseau invités."

# 7fc2bd82deb7433b8d2b5f310500de46
#: ../../networking2.rst:538
msgid ""
"A user or administrator can change the network offering that is associated with "
"an existing guest network."
msgstr ""
"Un utilisateur ou un administrateur peut changer l'offre de réseau qui est "
"associée avec un réseau d'invité existant."

# 9961a724d3c9484ca0b4c1d5978d448c
#: ../../networking2.rst:547
msgid ""
"If you are changing from a network offering that uses the CloudStack virtual "
"router to one that uses external devices as network service providers, you must "
"first stop all the VMs on the network."
msgstr ""
"Si vous êtes en train de changer d'une offre de réseau qui utilise le routeur "
"virtuel CloudStack vers une qui utilise des périphériques externes comme "
"fournisseurs de services réseaux, vous devez d'abord stopper toutes les VMs de "
"ce réseau."

# 449cac531ff847d796c389fb42f64c5c
# 44aa044295ce4f078b84c89406c09bb3
#: ../../networking2.rst:557 ../../networking2.rst:696
msgid "Click the name of the network you want to modify."
msgstr "Cliquer sur le nom du réseau que vous voulez modifier."

# 013515a624984a4181813aa619128c01
# fb4f4c6fee5a4d54a8210453ae8fea0b
#: ../../networking2.rst:561 ../../networking2.rst:700
msgid "In the Details tab, click Edit. |edit-icon.png|"
msgstr "Dans l'onglet Détails, cliquer sur Editer. |edit-icon.png|"

# 2af58d6970ae4fa49f1d797131ae88e5
#: ../../networking2.rst:565
msgid "In Network Offering, choose the new network offering, then click Apply."
msgstr ""
"Dans Offre de Réseau, choisir la nouvelle offre de réseau, puis cliquer sur "
"Appliquer."

# bc3a2c3c3d324782ae47b4da0e17c214
#: ../../networking2.rst:568
msgid ""
"A prompt is displayed asking whether you want to keep the existing CIDR. This is "
"to let you know that if you change the network offering, the CIDR will be "
"affected."
msgstr ""
"Une invite est affichée demandant si vous voulez conserver le CIDR existant. "
"Ceci vous permet de savoir que si vous changer l'offre de réseau, le CIDR sera "
"réaffecté."

# 1b6db56bbeec4098851005614591b4f2
#: ../../networking2.rst:572
msgid ""
"If you upgrade between virtual router as a provider and an external network "
"device as provider, acknowledge the change of CIDR to continue, so choose Yes."
msgstr ""
"Si vous évoluez entre un routeur virtuel comme fournisseur et un périphérique "
"réseau externe comme fournisseur, accepter le changement du CIDR pour continuer "
"en cliquant sur Oui."

# 146e4502698d4bedb783dec26532e410
#: ../../networking2.rst:578
msgid ""
"Wait for the update to complete. Don't try to restart VMs until the network "
"change is complete."
msgstr ""
"Attendre que la mise à jour soit finie. Ne pas essayer de redémarrer les VMs "
"tant que le changement du réseau ne soit pas fini."

# 4ae7ada6f8e841c4bab421568ca6c79c
#: ../../networking2.rst:583
msgid "If you stopped any VMs, restart them."
msgstr "Si vous avez stoppé des VMs, redémarrer les."

# 9725e5abe5b24d5b9b938be30e1e60f9
#: ../../networking2.rst:586
msgid "IP Reservation in Isolated Guest Networks"
msgstr "La réservation d'IP dans les réseaux isolés invité."

# 2160ad6d081d44638ebbdfb06dbfae1f
#: ../../networking2.rst:588
msgid ""
"In isolated guest networks, a part of the guest IP address space can be reserved "
"for non-CloudStack VMs or physical servers. To do so, you configure a range of "
"Reserved IP addresses by specifying the CIDR when a guest network is in "
"Implemented state. If your customers wish to have non-CloudStack controlled VMs "
"or physical servers on the same network, they can share a part of the IP address "
"space that is primarily provided to the guest network."
msgstr ""
"Dans les réseaux d'invités isolés, une partie de l'espace d'adresse IP invité "
"peut être réservée aux VM non CloudStack ou aux serveurs physiques. Pour ce "
"faire, vous configurez une plage d'adresses IP réservées en spécifiant le CIDR "
"lorsqu'un réseau invité est dans l'état Implémenté. Si vos clients souhaitent "
"disposer de VM non contrôlées par CloudStack ou de serveurs physiques sur le "
"même réseau, ils peuvent partager une partie de l'espace d'adressage IP qui est "
"normalement fournie au réseau invité."

# fbba0aa499f74b36b378c6c99ef2ea87
#: ../../networking2.rst:596
msgid ""
"In an Advanced zone, an IP address range or a CIDR is assigned to a network when "
"the network is defined. The CloudStack virtual router acts as the DHCP server "
"and uses CIDR for assigning IP addresses to the guest VMs. If you decide to "
"reserve CIDR for non-CloudStack purposes, you can specify a part of the IP "
"address range or the CIDR that should only be allocated by the DHCP service of "
"the virtual router to the guest VMs created in CloudStack. The remaining IPs in "
"that network are called Reserved IP Range. When IP reservation is configured, "
"the administrator can add additional VMs or physical servers that are not part "
"of CloudStack to the same network and assign them the Reserved IP addresses. "
"CloudStack guest VMs cannot acquire IPs from the Reserved IP Range."
msgstr ""
"Dans une zone Avancée, une plage d'adresses IP ou un CIDR est affecté à un "
"réseau lorsque celui-ci est défini. Le routeur virtuel CloudStack agit comme "
"serveur DHCP et utilise le CIDR pour attribuer des adresses IP aux machines "
"virtuelles invitées. Si vous décidez de réserver le CIDR à des fins autres que "
"CloudStack, vous pouvez spécifier une partie de la plage d'adresses IP ou le "
"CIDR qui ne devrait être attribuée que par le service DHCP du routeur virtuel "
"aux machines virtuelles invitées créées dans CloudStack. Les adresses IP "
"restantes de ce réseau sont appelées Plage d'IP Réservée. Lorsque la réservation "
"d'IP est configurée, l'administrateur peut ajouter des machines virtuelles ou "
"des serveurs physiques qui ne font pas partie de CloudStack au même réseau et "
"leur attribuer les adresses IP réservées. Les VM invitées CloudStack ne peuvent "
"plus acquérir d'IP de cette plage d'IP réservée."

# 90bf1a7d2c754ac4902085a1fd1ba748
#: ../../networking2.rst:610
msgid "IP Reservation Considerations"
msgstr "Considérations sur la réservation d'IP"

# bc5248dcc785447289018e7cdfcbae8a
#: ../../networking2.rst:612
msgid ""
"Consider the following before you reserve an IP range for non-CloudStack "
"machines:"
msgstr ""
"Prenez en compte ce qui suit avant de réserver une plage d'IP pour les machines "
"externes à CloudStack :"

# 7c3b4a1806bc46caaec696068e353f33
#: ../../networking2.rst:617
msgid "IP Reservation is supported only in Isolated networks."
msgstr "La réservation d'IP est supportée seulement dans les réseaux isolés."

# a58ea815910f4eeebf5310fba2f2b4e6
#: ../../networking2.rst:621
msgid ""
"IP Reservation can be applied only when the network is in Implemented state."
msgstr ""
"La réservation IP peut être appliquée seulement lorsque le réseau est dans "
"l'état implémenté."

# b1e7853953d34392be43f635d609444e
#: ../../networking2.rst:626
msgid "No IP Reservation is done by default."
msgstr "Aucune réservation d'IP n'est effectuée par défaut."

# c5d1c53bfa0a4acb8b354fa73f021b37
#: ../../networking2.rst:630
msgid "Guest VM CIDR you specify must be a subset of the network CIDR."
msgstr ""
"Le CIDR des VM Invités que vous spécifiez doit être un sous-réseau du CIDR du "
"réseau."

# 71e39d8747064bfa95ff48adddf42e34
#: ../../networking2.rst:634
msgid ""
"Specify a valid Guest VM CIDR. IP Reservation is applied only if no active IPs "
"exist outside the Guest VM CIDR."
msgstr ""
"Spécifiez un CIDR de VM Invités valide. La réservation d'IP n'est appliquée que "
"si aucune IP active n'existe à l'extérieur du CIDR des VM invités."

# 7cd262eb2864435f953ba2f8d9b2e0a0
#: ../../networking2.rst:637
msgid ""
"You cannot apply IP Reservation if any VM is alloted with an IP address that is "
"outside the Guest VM CIDR."
msgstr ""
"Vous ne pouvez pas appliquer une réservation d'IP si une machine virtuelle s'est "
"vue allouer une adresse IP se trouvant en dehors du CIDR des VM Invités."

# e135731ad79443bcb5dd396201d24cf1
#: ../../networking2.rst:642
msgid ""
"To reset an existing IP Reservation, apply IP reservation by specifying the "
"value of network CIDR in the CIDR field."
msgstr ""
"Pour réinitialiser une réservation d'IP existante, appliquez la réservation IP "
"en spécifiant la valeur du réseau CIDR dans le champ CIDR."

# 3019eee8f787404483287650255b0fe0
#: ../../networking2.rst:645
msgid ""
"For example, the following table describes three scenarios of guest network "
"creation:"
msgstr ""
"Par exemple, le tableau suivant décris trois scénarios de création de réseau "
"invité :"

# 80174dfa477741e8a428588c2de692c5
#: ../../networking2.rst:649
msgid "Case"
msgstr "Cas"

# eef86be3eee44a648412010005fb2333
# 5f16a478e68c498db89c7157f7a1baf2
# 60559aa9aec74533a0723a299680c8a8
# fe93ec4b20274d52a8708a5cf4922fbd
# a51541e1ff974e5b9cec68fc9bcf7ea7
# d31c3f23647842caa0554fd1db873ce4
# 94126de200d245e5a36add083af0c115
# d3690595a81542b3a1a8daec4b800f9c
# 7cb858db9ac346838a97c8e7ed8dcd87
# e2cbdab6f6d04ca3a9579faffa22f221
# d1254ad4a86545a8ac507083e4787780
# 7abcfe51770247ca88d17c97fb261b52
# ab3f6c13fcea4cdf8df4054fc6c55960
#: ../../networking2.rst:649 ../../networking2.rst:3931 ../../networking2.rst:4403
#: ../../networking2.rst:4503 ../../networking2.rst:4695 ../../networking2.rst:5251
#: ../../networking2.rst:5299 ../../networking2.rst:5558 ../../networking2.rst:5884
#: ../../networking2.rst:5971 ../../networking2.rst:6063 ../../networking2.rst:6306
#: ../../networking2.rst:6700
msgid "CIDR"
msgstr "CIDR"

# 7190e9a05c824c698c369f059903140f
#: ../../networking2.rst:649
msgid "Network CIDR"
msgstr "CIDR du réseau"

# 7b3e79ea891f42948ec144865f44db13
#: ../../networking2.rst:649
msgid "Reserved IP Range for Non-CloudStack VMs"
msgstr "Interval d'IP réservées pour les VMs Non-CloudStack"

# 4c1abc1728ab4017a78ab13faa073d32
#: ../../networking2.rst:649
msgid "Description"
msgstr "Description"

# 95c1f9dcea57490f9baba27f6052d7df
# c7dc34629f4a4f3380ad7fa0415823fe
#: ../../networking2.rst:651 ../../networking2.rst:5253
msgid "1"
msgstr "1"

# ca251edef20a4a09a96d4439f40e9fcc
# 47ec19dde3c14d2daf3a5f567a8ab892
# 96ce4f76ef034c6c8ad91aa5358390ea
#: ../../networking2.rst:651 ../../networking2.rst:652 ../../networking2.rst:655
msgid "10.1.1.0/24"
msgstr "10.1.1.0/24"

# 9553954ea80b4c108951c22f66b1f907
# 9d8d02ccc8624c42ab63f95c1e6e61d2
# 1711e6d7b17c49c1bbacdfe2f237bc1c
# 3fe4ae27728949db852e351bdc3590a0
#: ../../networking2.rst:651 ../../networking2.rst:655
msgid "None"
msgstr "Aucun"

# 4cefe96c4cd048d6ab5bba6b2b2b2c1f
#: ../../networking2.rst:651
msgid "No IP Reservation."
msgstr "Aucune réservation d'IP."

# 9743a326091e467d9b6bca3cd0e35000
# 326ceea3093e4ad2bc955dd15a12fcaa
#: ../../networking2.rst:652 ../../networking2.rst:5254
msgid "2"
msgstr "2"

# 28839e89c7b84228a801613e0c9ed896
#: ../../networking2.rst:652
msgid "10.1.1.0/26"
msgstr "10.1.1.0/26"

# fb5379ee12174589ad3d2da83e61667c
#: ../../networking2.rst:652
msgid "10.1.1.64 to 10.1.1.254"
msgstr "10.1.1.64 à 10.1.1.254"

# a9558f6e733545849f81f3ae6fc11f08
#: ../../networking2.rst:652
msgid ""
"IP Reservation configured by the UpdateNetwork API with guestvmcidr=10.1.1.0/26 "
"or enter 10.1.1.0/26 in the CIDR field in the UI."
msgstr ""
"La réservation d'IP est configurée par l'API UpdateNetwork avec "
"guestvmcidr=10.1.1.0/26 ou saisir 10.1.1.0/26 dans le champ CIDR de l'interface "
"utilisateur."

# b3beece5bd0f4a3d8a0234aa9980a330
#: ../../networking2.rst:655
msgid "3"
msgstr "3"

# 79c55aa2874f4650b96805d27acfee4e
#: ../../networking2.rst:655
msgid ""
"Removing IP Reservation by the UpdateNetwork API with guestvmcidr=10.1.1.0/24 or "
"enter 10.1.1.0/24 in the CIDR field in the UI."
msgstr ""
"La suppression d'une réservation d'IP est effectuée par l'API UpdateNetwork avec "
"guestvmcidr=10.1.1.0/24 ou saisir 10.1.1.0/24 dans le champ CIDR de l'interface "
"utilisateur."

# 69a8f32537914ac6a722239a9dc07582
# d8ca4fc7bf014daa9437cc4d5c7eb4f6
#: ../../networking2.rst:661 ../../networking2.rst:1774
msgid "Limitations"
msgstr "Limitations"

# 6d66399f47684bc1940beb29a805e60c
#: ../../networking2.rst:665
msgid ""
"The IP Reservation is not supported if active IPs that are found outside the "
"Guest VM CIDR."
msgstr ""
"La réservation d'IP n'est pas supportée si des IP actives sont trouvées à "
"l'extérieur du CIDR des VM invités."

# db05ec3e0280485b9f6f8c5d902cbcc7
#: ../../networking2.rst:670
msgid ""
"Upgrading network offering which causes a change in CIDR (such as upgrading an "
"offering with no external devices to one with external devices) IP Reservation "
"becomes void if any. Reconfigure IP Reservation in the new re-implemeted network."
msgstr ""
"La mise à niveau d'une offre réseau qui provoque une modification de son CIDR "
"(comme une mise à niveau d'une offre sans périphériques externes vers une avec "
"un périphérique externe), fait que la réservation d'IP devient nulle, le cas "
"échéant. Reconfigurez la réservation d'IP dans le nouveau réseau ré-implémenté."

# 6edc84466bc24a3d85247cab80c0cd80
#: ../../networking2.rst:676
msgid "Best Practices"
msgstr "Recommandations"

# 4bd0b852d6474b84accb421f128331f4
#: ../../networking2.rst:678
msgid ""
"Apply IP Reservation to the guest network as soon as the network state changes "
"to Implemented. If you apply reservation soon after the first guest VM is "
"deployed, lesser conflicts occurs while applying reservation."
msgstr ""
"Appliquez la Réservation d'IP à un réseau invité dès que l'état du réseau passe "
"à Implementé. Si vous appliquez la réservation peu de temps après le déploiement "
"de la première VM invitée, des conflits mineurs surviennent lors de "
"l'application de la réservation."

# e601241fba8a43feb30b4dcde1dc89a6
#: ../../networking2.rst:684
msgid "Reserving an IP Range"
msgstr "Réserver un intervalle d'IP"

# dd9d0df809aa420899439632c2e7019f
#: ../../networking2.rst:702
msgid "The CIDR field changes to editable one."
msgstr "Le champ CIDR devient éditable."

# 0ffc29b024624ccdb36d0ea407209d7f
#: ../../networking2.rst:706
msgid "In CIDR, specify the Guest VM CIDR."
msgstr "Dans CIDR, spécifier le CIDR des VM invités."

# b2b4f195c2e847418d352a7e1ef06061
#: ../../networking2.rst:710
msgid "Click Apply."
msgstr "Cliquer sur Appliquer."

# d33d489b7f234940bc59878574087127
#: ../../networking2.rst:712
msgid ""
"Wait for the update to complete. The Network CIDR and the Reserved IP Range are "
"displayed on the Details page."
msgstr ""
"Attendre que la mise à jour soit finie. Le CIDR du réseau et la plage d'IP "
"réservée sont affichées dans la page de Détails."

# 06aed4f105fd47d283331f291310c288
#: ../../networking2.rst:716
msgid "Reserving Public IP Addresses and VLANs for Accounts"
msgstr ""

# d29491316baf475184dbf3bd53bb19c3
#: ../../networking2.rst:718
msgid ""
"CloudStack provides you the ability to reserve a set of public IP addresses and "
"VLANs exclusively for an account. During zone creation, you can continue "
"defining a set of VLANs and multiple public IP ranges. This feature extends the "
"functionality to enable you to dedicate a fixed set of VLANs and guest IP "
"addresses for a tenant."
msgstr ""

# 68a3748797434d67bcbfc405a263a065
#: ../../networking2.rst:724
msgid ""
"Note that if an account has consumed all the VLANs and IPs dedicated to it, the "
"account can acquire two more resources from the system. CloudStack provides the "
"root admin with two configuration parameter to modify this default behavior: use."
"system.public.ips and use.system.guest.vlans. These global parameters enable the "
"root admin to disallow an account from acquiring public IPs and guest VLANs from "
"the system, if the account has dedicated resources and these dedicated resources "
"have all been consumed. Both these configurations are configurable at the "
"account level."
msgstr ""

# 40f4120539264e8fb5dbf5a7064d1fe9
#: ../../networking2.rst:734
msgid "This feature provides you the following capabilities:"
msgstr ""

# 9bf2889fc36847ebabce3e8f9b625163
#: ../../networking2.rst:738
msgid ""
"Reserve a VLAN range and public IP address range from an Advanced zone and "
"assign it to an account"
msgstr ""

# e1e3b63901214e39b4cd5ded0ff47ab6
#: ../../networking2.rst:743
msgid "Disassociate a VLAN and public IP address range from an account"
msgstr ""

# a849c48967014ee4ab4c29e6250ac9bc
#: ../../networking2.rst:747
msgid "View the number of public IP addresses allocated to an account"
msgstr ""

# 4c148c9f929f4394861c0230a52f46ea
#: ../../networking2.rst:751
msgid ""
"Check whether the required range is available and is conforms to account limits."
msgstr ""

# b03cc0c4939e4538b33463b1acfa081f
#: ../../networking2.rst:754
msgid "The maximum IPs per account limit cannot be superseded."
msgstr ""

# 331f9e80ff07451f833ea2f1e6592f48
#: ../../networking2.rst:757
msgid "Dedicating IP Address Ranges to an Account"
msgstr "Dédier un intervalle d'adressses IP à un compte"

# cc9f01ca9cd04090b9ef074c6c68eb34
# af5838600fdc41f68b104a44ea03d81a
# 6230bfd5086842d69df7366e01ad5977
#: ../../networking2.rst:765 ../../networking2.rst:886 ../../networking2.rst:3054
msgid "In the left navigation bar, click Infrastructure."
msgstr "Dans la barre de navigation de gauche, cliquer sur Infrastructure."

# 732571fdd87e45b2ba3d0c99d319dada
# 0a044cf03cd04706a971cfd6747f3972
#: ../../networking2.rst:769 ../../networking2.rst:890
msgid "In Zones, click View All."
msgstr "Dans Zones, cliquer sur Voir toutes."

# 718b87bdd1b24472a05561bc487af593
# f0113ce9f8584511a94348c59e5098e9
# 11d188714878411189998fcd7fb05a07
#: ../../networking2.rst:773 ../../networking2.rst:894 ../../networking2.rst:3062
msgid "Choose the zone you want to work with."
msgstr "Choisir la zone avec laquelle vous voulez travailler."

# e2c9d117a33a4ca698597ea697c642a8
#: ../../networking2.rst:781
msgid "In the Public node of the diagram, click Configure."
msgstr "Dans le noeud Public du diagramme, cliquer sur Configure."

# b587547f92d54da6a66fb328a1f90aa1
#: ../../networking2.rst:785
msgid "Click the IP Ranges tab."
msgstr "Cliquer sur l'onglet intervalle IP."

# 71762e4009804e12af198d32409f6abe
#: ../../networking2.rst:787
msgid ""
"You can either assign an existing IP range to an account, or create a new IP "
"range and assign to an account."
msgstr ""

# 89865009ad614a7caefc9d7e195d1f2c
#: ../../networking2.rst:792
msgid "To assign an existing IP range to an account, perform the following:"
msgstr ""
"Pour assigner un intervalle d'IP existant à un compte, effectuer les actions "
"suivantes :"

# 023883e725b743e790c6c7d378fae5d1
#: ../../networking2.rst:796
msgid "Locate the IP range you want to work with."
msgstr "Localiser l'intervalle d'IP avec lequel vous voulez travailler."

# 727f9c60c5a149af95962b79fb673136
#: ../../networking2.rst:800
msgid "Click Add Account |addAccount-icon.png| button."
msgstr "Cliquer sur le bouton Ajouter un compte |addAccount-icon.png|."

# 98609249ea444461a727d851b23bdb4a
#: ../../networking2.rst:802
msgid "The Add Account dialog is displayed."
msgstr "La boîte de dialogue Ajouter un compte est affichée."

# 91a874f4d53548b5a54dd26c7a8070c4
#: ../../networking2.rst:810
msgid "**Account**: The account to which you want to assign the IP address range."
msgstr ""

# d765ebdf04b540e9bb49f050bc9d5d1c
#: ../../networking2.rst:815
msgid "**Domain**: The domain associated with the account."
msgstr ""

# 68e22a0328b543599b5c092cb1be55c8
#: ../../networking2.rst:817
msgid "To create a new IP range and assign an account, perform the following:"
msgstr ""
"Pour créer un nouvel intervalle et l'assigner à un compte, effectuer les actions "
"suivantes :"

# a7351c3fc8aa4e6ab6f6de9982df895a
#: ../../networking2.rst:826
msgid "**Gateway**"
msgstr "**Passerelle**"

# a8212080596548efb06b7f360af77801
#: ../../networking2.rst:830
msgid "**Netmask**"
msgstr "**Masque de sous-réseau**"

# 2bac81ea68b044c99364b2e06d943f9e
#: ../../networking2.rst:834
msgid "**VLAN**"
msgstr "**VLAN**"

# a4fe8a556467404db7fc7ce462d9d690
#: ../../networking2.rst:838
msgid "**Start IP**"
msgstr "**IP de départ**"

# b86850aa7e104d75b25613535bda6ad1
#: ../../networking2.rst:842
msgid "**End IP**"
msgstr "**IP de fin**"

# 0cb6e7bb5c24462ca8eba42cba3c2ba0
#: ../../networking2.rst:846
msgid "**Account**: Perform the following:"
msgstr "**Compte** : Effectuer au choix :"

# ba26e0ab36b64d9a9e00350c439eb9ec
#: ../../networking2.rst:850
msgid "Click Account."
msgstr "Cliquer sur Compte."

# 7ef94c9e8e0b407d82dc09a915d88b3e
#: ../../networking2.rst:852
msgid "The Add Account page is displayed."
msgstr "La page Ajouter un compte est affichée."

# 2e18417b732143f89ffa9ab5c5767d1d
#: ../../networking2.rst:860
msgid ""
"****Account****: The account to which you want to assign an IP address range."
msgstr ""

# 24326080425a4f7ba299c24defa8ee63
# 3360555202854da8a230941d49441cb7
#: ../../networking2.rst:865 ../../networking2.rst:930
msgid "****Domain****: The domain associated with the account."
msgstr ""

# 57dd5ad50af947868ed60fb4f4871b8e
# fd71c947508a4b19a74d5e8e68ab028a
# df1c4b86b0574044b3b1e2f59f86e433
# 911725135046474fbb858f58a060c70c
# 7f4d32193a8e441ba5d3ba76afdc660d
# 0d1a59ac450f4913861519bb5690af46
# 68ec8457b8f6477a877539749238ecd7
#: ../../networking2.rst:874 ../../networking2.rst:1935 ../../networking2.rst:3493
#: ../../networking2.rst:3595 ../../networking2.rst:3751 ../../networking2.rst:3984
#: ../../networking2.rst:5732
msgid "Click Add."
msgstr "Cliquer sur Ajouter."

# 6ef67854e5d346c7913e58e20a2b72f4
#: ../../networking2.rst:877
msgid "Dedicating VLAN Ranges to an Account"
msgstr "Dédier des plages de VLAN à un compte"

# 37745b0f98834f4b805af70b9546e2d7
#: ../../networking2.rst:881
msgid ""
"After the CloudStack Management Server is installed, log in to the CloudStack UI "
"as administrator."
msgstr ""

# f8bb5c0c781349a6ad62cac445eb11cc
# eab05b15433e427aa1bb42cc204ab3e9
#: ../../networking2.rst:902 ../../networking2.rst:1376
msgid "In the Guest node of the diagram, click Configure."
msgstr "Dans le noeud Invité du diagramme, cliquer sur Configurer."

# 61505cd3d4344e769a534aed469c073d
#: ../../networking2.rst:906
msgid "Select the Dedicated VLAN Ranges tab."
msgstr ""

# 1df8c107f4854732a4f8a3a50c9cec49
#: ../../networking2.rst:910
msgid "Click Dedicate VLAN Range."
msgstr "Cliquer sur Dédier un intervalle de VLAN"

# c02ef1fcb0e642a28e69bd463286ec33
#: ../../networking2.rst:912
msgid "The Dedicate VLAN Range dialog is displayed."
msgstr ""

# acd323fd8ca8468880666db446b5d222
#: ../../networking2.rst:920
msgid "****VLAN Range****: The VLAN range that you want to assign to an account."
msgstr ""

# 1a79b0742f1a4aefa692f541aa4b5892
#: ../../networking2.rst:925
msgid ""
"****Account****: The account to which you want to assign the selected VLAN range."
msgstr ""

# fe1be017fe7644368cd98ae4c68575eb
#: ../../networking2.rst:933
msgid "Configuring Multiple IP Addresses on a Single NIC"
msgstr "Configurer plusieurs adresses IP sur une seule interface réseau."

# c38d77c3c3a04ece8ca7568348264c1c
#: ../../networking2.rst:935
msgid ""
"CloudStack provides you the ability to associate multiple private IP addresses "
"per guest VM NIC. In addition to the primary IP, you can assign additional IPs "
"to the guest VM NIC. This feature is supported on all the network "
"configurations: Basic, Advanced, and VPC. Security Groups, Static NAT and Port "
"forwarding services are supported on these additional IPs."
msgstr ""
"CloudStack offre la possibilité d'associer plusieurs adresses IP privées par "
"interface NIC sur les VM clients. En plus de l'IP primaire, vous pouvez affecter "
"des adresses IP supplémentaires à l'interface NIC de la VM invitée. Cette "
"fonctionnalité est prise en charge sur toutes les configurations réseau : "
"Basique, Avancée et VPC. Les services de Groupes de sécurité, de NAT statique et "
"de transfert de port sont pris en charge sur ces IP supplémentaires."

# f6ae31a4bdbf477bb30c85f877c5c6b6
#: ../../networking2.rst:942
msgid ""
"As always, you can specify an IP from the guest subnet; if not specified, an IP "
"is automatically picked up from the guest VM subnet. You can view the IPs "
"associated with for each guest VM NICs on the UI. You can apply NAT on these "
"additional guest IPs by using network configuration option in the CloudStack UI. "
"You must specify the NIC to which the IP should be associated."
msgstr ""
"Comme toujours, vous pouvez spécifier une IP à partir du sous-réseau invité ; si "
"elle n'est pas spécifiée, une IP est automatiquement récupérée à partir du sous-"
"réseau VM invité. Vous pouvez afficher les IP associées à chaque NIC de la VM "
"invité sur l'interface utilisateur. Vous pouvez appliquer du NAT sur ces IP "
"supplémentaires de l'invité en utilisant l'option de configuration réseau dans "
"l'interface utilisateur CloudStack. Vous devez spécifier la carte réseau à "
"laquelle l'adresse IP doit être associée."

# e122667851cc41cbb7ee1643ac94d437
#: ../../networking2.rst:949
msgid ""
"This feature is supported on XenServer, KVM, and VMware hypervisors. Note that "
"Basic zone security groups are not supported on VMware."
msgstr ""
"Cette fonctionnalité est supportée sur les hyperviseurs XenServer, KVM et "
"VMware. Notez que les groupes de sécurité dans les zones Basiques ne sont pas "
"supportés sur VMware."

# d244bec96a6742dcba6445489ebe5218
#: ../../networking2.rst:953
msgid "Use Cases"
msgstr "Cas d'usages"

# 6bb7477d1acc4f3fbd79cd0dbfc2ca5e
#: ../../networking2.rst:955
msgid "Some of the use cases are described below:"
msgstr "Les exemples suivants sont des cas d'usages :"

# deaccf09c30b469a945f6c92f5b3e9e8
#: ../../networking2.rst:959
msgid ""
"Network devices, such as firewalls and load balancers, generally work best when "
"they have access to multiple IP addresses on the network interface."
msgstr ""
"Les périphériques réseaux, comme les pare-feu ou les répartiteurs de charge, "
"fonctionnent généralement mieux lorsqu'ils ont accès à plusieurs adresses IP sur "
"l'interface réseau."

# b3bb1a633fb0431687fc030d4f1135d3
#: ../../networking2.rst:965
msgid ""
"Moving private IP addresses between interfaces or instances. Applications that "
"are bound to specific IP addresses can be moved between instances."
msgstr ""
"Déplacer des adresses IP privées entre interfaces ou instances. Les applications "
"qui sont liées à des adresses IP spécifiques peuvent être déplacées entre les "
"instances."

# 5d372ef180164330a3adddfbf3c1cc0f
#: ../../networking2.rst:971
msgid ""
"Hosting multiple SSL Websites on a single instance. You can install multiple SSL "
"certificates on a single instance, each associated with a distinct IP address."
msgstr ""
"Héberger plusieurs sites webs SSL sur une seule instance. Vous pouvez installer "
"plusieurs certificats sur une seule instance, chacun associé avec une adresse IP "
"distincte."

# 37f9e5af46a34673a930879c2e5cba6f
# c7db437925a34c6a87c825ef10de2e9a
# 3f3eba9611d84d6aae271d271019803b
#: ../../networking2.rst:976 ../../networking2.rst:1194 ../../networking2.rst:6425
msgid "Guidelines"
msgstr "Lignes directrices"

# 3e292b09263b4b97bfd6c423204dbc2f
#: ../../networking2.rst:978
msgid ""
"To prevent IP conflict, configure different subnets when multiple networks are "
"connected to the same VM."
msgstr ""
"Pour éviter des conflits IP, configurer différents sous-réseaux lorsque "
"plusieurs réseaux sont connectés à la même VM."

# 95785c3d19f449f78cc05d757ee25d24
#: ../../networking2.rst:982
msgid "Assigning Additional IPs to a VM"
msgstr "Assigner des IPs additionnelles à une VM"

# 59a152d36896406a8e27bc6d934ee420
#: ../../networking2.rst:986
msgid "Log in to the CloudStack UI."
msgstr "Se connecter à l'interface CloudStack."

# 62ef4fc700f2458282be770129fbe8f3
#: ../../networking2.rst:990
msgid "In the left navigation bar, click Instances."
msgstr "Dans la barre de navigation de gauche, cliquer sur Instances."

# e481a0bf01464ec993e94b0b35787eed
#: ../../networking2.rst:994
msgid "Click the name of the instance you want to work with."
msgstr "Cliquez sur le nom de l'instance avec laquelle vous souhaitez travailler."

# 040e0aa0901c4a738201d7f2b345c0f1
#: ../../networking2.rst:998
msgid "In the Details tab, click NICs."
msgstr "Dans l'onglet Détails, cliquer sur Interfaces."

# 783db8f186394495ad0ab1546a97951e
#: ../../networking2.rst:1002
msgid "Click View Secondary IPs."
msgstr "Cliquer sur Voir les IPs secondaires."

# 81df8a9f3f814aaa861dd841284985ef
#: ../../networking2.rst:1006
msgid "Click Acquire New Secondary IP, and click Yes in the confirmation dialog."
msgstr ""
"Cliquez sur Obtenir une nouvelle adresse IP, et cliquez sur Oui dans la boîte de "
"dialogue de confirmation."

# 5bee3ae73622433aaf3ff3502d16bfcb
#: ../../networking2.rst:1009
msgid ""
"You need to configure the IP on the guest VM NIC manually. CloudStack will not "
"automatically configure the acquired IP address on the VM. Ensure that the IP "
"address configuration persist on VM reboot."
msgstr ""
"Vous devez configurer l'IP sur l'interface de la VM invitée manuellement. "
"CloudStack ne va pas automatiquement configurer l'IP acquise sur la VM. Assurez "
"vous que la configuration de l'adresse IP soit persistante après le redémarrage."

# f5aed3f52f76443b9810ed9d0bd1d47c
#: ../../networking2.rst:1013
msgid ""
"Within a few moments, the new IP address should appear with the state Allocated. "
"You can now use the IP address in Port Forwarding or StaticNAT rules."
msgstr ""
"Au bout de quelques instants, la nouvelle adresse IP devrait apparaître dans "
"l'état Allouée. Vous pouvez maintenant utiliser l'adresse IP pour la redirection "
"de port ou les règles de NAT statiques."

# 91390ddfe5794441a909d512aaf69b16
#: ../../networking2.rst:1018
msgid "Port Forwarding and StaticNAT Services Changes"
msgstr "Changements de services de redirection de port et de StaticNAT"

# 178e8a8fb2244a73af81938965720ec0
#: ../../networking2.rst:1020
msgid ""
"Because multiple IPs can be associated per NIC, you are allowed to select a "
"desired IP for the Port Forwarding and StaticNAT services. The default is the "
"primary IP. To enable this functionality, an extra optional parameter "
"'vmguestip' is added to the Port forwarding and StaticNAT APIs (enableStaticNat, "
"createIpForwardingRule) to indicate on what IP address NAT need to be "
"configured. If vmguestip is passed, NAT is configured on the specified private "
"IP of the VM. if not passed, NAT is configured on the primary IP of the VM."
msgstr ""
"Étant donné que plusieurs IP peuvent être associées par carte réseau, vous êtes "
"autorisé à sélectionner l'adresse IP désirée pour les services Port Forwarding "
"et StaticNAT. La valeur par défaut est l'adresse IP principale. Pour activer "
"cette fonctionnalité, un paramètre optionnel supplémentaire 'vmguestip' est "
"ajouté aux API du port forwarding et du StaticNAT (enableStaticNat, "
"createIpForwardingRule) pour indiquer sur quelle adresse IP le NAT doit être "
"configuré. Si vmguestip est passé, le NAT est configuré sur l'IP privée "
"spécifiée de la VM. Si elle n'est pas passée, le NAT est configuré sur l'adresse "
"IP principale de la VM."

# 9a799b4a628a476f9d231bc81b470264
#: ../../networking2.rst:1030
msgid "About Multiple IP Ranges"
msgstr "A propos des intervalles IP multiples"

# 028ff8cab15f440e877ecf3ac468a1a2
#: ../../networking2.rst:1032
msgid "The feature can only be implemented on IPv4 addresses."
msgstr "Cette fonctionnalité ne peut être implémentée que sur les adresses IPv4."

# e4d2239d0d0c410c8f96922f8da73fd8
#: ../../networking2.rst:1034
msgid ""
"CloudStack provides you with the flexibility to add guest IP ranges from "
"different subnets in Basic zones and security groups-enabled Advanced zones. For "
"security groups-enabled Advanced zones, it implies multiple subnets can be added "
"to the same VLAN. With the addition of this feature, you will be able to add IP "
"address ranges from the same subnet or from a different one when IP address are "
"exhausted. This would in turn allows you to employ higher number of subnets and "
"thus reduce the address management overhead. To support this feature, the "
"capability of ``createVlanIpRange`` API is extended to add IP ranges also from a "
"different subnet."
msgstr ""
"CloudStack offre la flexibilité d'ajouter des plages d'IP d'invité de différents "
"sous-réseaux dans les zones Basiques et dans les zones Avancées avec groupes de "
"sécurité. Pour les zones avancées avec groupes de sécurité, cela implique que "
"plusieurs sous-réseaux puissent être ajoutés au même VLAN. Grâce à cette "
"fonctionnalité, vous pourrez ajouter des plages d'adresses IP à partir du même "
"sous-réseau ou à partir d'un autre lorsque les adresses IP sont épuisées. Cela "
"permet au final d'utiliser un plus grand nombre de sous-réseaux et de réduire "
"ainsi la charge de travail liée à la gestion des adresses. Pour prendre en "
"charge cette fonctionnalité, la capacité de l'API `` createVlanIpRange`` est "
"étendue pour ajouter des plages d'adresses IP à partir d'un autre sous-réseau."

# 2881a530808e42f5be3d6298eeb47271
#: ../../networking2.rst:1045
msgid ""
"Ensure that you manually configure the gateway of the new subnet before adding "
"the IP range. Note that CloudStack supports only one gateway for a subnet; "
"overlapping subnets are not currently supported."
msgstr ""
"Assurez-vous d'avoir manuellement configuré la passerelle du nouveau sous-réseau "
"avant d'ajouter la plage d'IP. Notez que CloudStack supporte une seule "
"passerelle par sous-réseau ; le chevauchement de réseau n'est pas actuellement "
"pris en compte."

# 003e5d07c0794227bc714b0f29892867
#: ../../networking2.rst:1049
msgid ""
"Use the ``deleteVlanRange`` API to delete IP ranges. This operation fails if an "
"IP from the remove range is in use. If the remove range contains the IP address "
"on which the DHCP server is running, CloudStack acquires a new IP from the same "
"subnet. If no IP is available in the subnet, the remove operation fails."
msgstr ""
"Utilisez l'API ``deleteVlanRange`` pour supprimer les plages IP. Cette opération "
"échoue si une IP parmi celles de la plage de suppression est en cours "
"d'utilisation. Si la plage de suppression contient l'adresse IP d'un serveur "
"DHCP est en cours d'exécution, CloudStack acquiert une nouvelle adresse IP à "
"partir du même sous-réseau. Si aucune adresse IP n'est disponible dans le sous-"
"réseau, l'opération de suppression échoue."

# b8a91ec2e02844bd85db4f28846aad2b
#: ../../networking2.rst:1055
msgid "This feature is supported on KVM, xenServer, and VMware hypervisors."
msgstr ""
"Cette fonctionnalité est supportée sur les hyperviseurs XenServer, VMware et KVM."

# ed378b716b614e5ea18ea508d7ecccb8
#: ../../networking2.rst:1058
msgid "About Elastic IP"
msgstr "A propos d'Elastic IP"

# cb979912025d4652b170b423b3323451
#: ../../networking2.rst:1060
msgid ""
"Elastic IP (EIP) addresses are the IP addresses that are associated with an "
"account, and act as static IP addresses. The account owner has the complete "
"control over the Elastic IP addresses that belong to the account. As an account "
"owner, you can allocate an Elastic IP to a VM of your choice from the EIP pool "
"of your account. Later if required you can reassign the IP address to a "
"different VM. This feature is extremely helpful during VM failure. Instead of "
"replacing the VM which is down, the IP address can be reassigned to a new VM in "
"your account."
msgstr ""
"Les adresses Elastic IP (EIP) sont les adresses IP associées à un compte et qui "
"agissent comme des adresses IP statiques. Le propriétaire du compte a le "
"contrôle complet sur les adresses IP Elastic qui appartiennent au compte. En "
"tant que propriétaire d'un compte, vous pouvez allouer une IP élastique à une "
"machine virtuelle de votre choix depuis la réserve d'EIP de votre compte. Plus "
"tard, si nécessaire, vous pouvez réaffecter l'adresse IP à une machine virtuelle "
"différente. Cette fonctionnalité est extrêmement utile lors de la défaillance "
"d'une VM. Au lieu de remplacer la machine virtuelle qui est en panne, l'adresse "
"IP peut être réaffectée à une nouvelle VM de votre compte."

# a05811529f014d1aa52b2974f0bba51e
#: ../../networking2.rst:1069
msgid ""
"Similar to the public IP address, Elastic IP addresses are mapped to their "
"associated private IP addresses by using StaticNAT. The EIP service is equipped "
"with StaticNAT (1:1) service in an EIP-enabled basic zone. The default network "
"offering, DefaultSharedNetscalerEIPandELBNetworkOffering, provides your network "
"with EIP and ELB network services if a NetScaler device is deployed in your "
"zone. Consider the following illustration for more details."
msgstr ""
"De manière similaire à une adresse IP publique, les adresses Elastic IP sont "
"mappées à leurs adresses IP privées associées en utilisant du StaticNAT. Le "
"service EIP est équipé du service StaticNAT (1:1) dans une zone basique avec EIP "
"activé. L'offre réseau par défaut, "
"DefaultSharedNetscalerEIPandELBNetworkOffering, fournit à votre réseau des "
"services réseau EIP et ELB si un périphérique NetScaler est déployé dans votre "
"zone. Considérez l'illustration suivante pour plus de détails."

# d254f6b5f23f4583bf38593e35204bd5
#: ../../networking2.rst:1077
msgid "|eip-ns-basiczone.png|"
msgstr "|eip-ns-basiczone.png|"

# ec87f8235ad14731b88fa165faf2855f
#: ../../networking2.rst:1079
msgid ""
"In the illustration, a NetScaler appliance is the default entry or exit point "
"for the CloudStack instances, and firewall is the default entry or exit point "
"for the rest of the data center. Netscaler provides LB services and staticNAT "
"service to the guest networks. The guest traffic in the pods and the Management "
"Server are on different subnets / VLANs. The policy-based routing in the data "
"center core switch sends the public traffic through the NetScaler, whereas the "
"rest of the data center goes through the firewall."
msgstr ""
"Dans l'illustration, une appliance NetScaler est le point d'entrée ou de sortie "
"par défaut pour les instances CloudStack et le pare-feu est l'entrée ou le point "
"de sortie par défaut pour le reste du centre de données. Le Netscaler fournit "
"des services de LB et un service staticNAT aux réseaux invités. Le trafic invité "
"dans les pods et le serveur d'administration se trouvent sur différents sous-"
"réseaux / VLAN. Le routage basé sur les stratégies dans le coeur de réseau du "
"centre de données envoie le trafic public via le NetScaler, tandis que le reste "
"du centre de données passe par le pare-feu."

# cccbede2f664419a97a65174be17cfba
#: ../../networking2.rst:1088
msgid "The EIP work flow is as follows:"
msgstr "Le workflow de l'EIP est le suivant :"

# 748bdba8746d4237862652eeefe51b0c
#: ../../networking2.rst:1092
msgid ""
"When a user VM is deployed, a public IP is automatically acquired from the pool "
"of public IPs configured in the zone. This IP is owned by the VM's account."
msgstr ""
"Lorsqu'une VM utilisateur est déployée, une IP publique est automatiquement "
"acquise depuis la réserve d'IPs publiques configurée dans la zone. Cette IP "
"appartient au compte de la VM."

# b453f18754a649e5913c58ce4a28993b
#: ../../networking2.rst:1098
msgid ""
"Each VM will have its own private IP. When the user VM starts, Static NAT is "
"provisioned on the NetScaler device by using the Inbound Network Address "
"Translation (INAT) and Reverse NAT (RNAT) rules between the public IP and the "
"private IP."
msgstr ""
"Chaque VM va avoir sa propre IP privée. Lorsque la VM de l'utilisateur démarre, "
"le Static Nat est provisionné sur le périphérique NetScaler en utilisant des "
"règles d'Inbound Network Address Translation (INAT) et de Reverse NAT (RNAT) "
"entre l'IP publique et l'IP privée"

# 6e1a151b2c704623941c8c05d3a90134
#: ../../networking2.rst:1104
msgid ""
"Inbound NAT (INAT) is a type of NAT supported by NetScaler, in which the "
"destination IP address is replaced in the packets from the public network, such "
"as the Internet, with the private IP address of a VM in the private network. "
"Reverse NAT (RNAT) is a type of NAT supported by NetScaler, in which the source "
"IP address is replaced in the packets generated by a VM in the private network "
"with the public IP address."
msgstr ""
"L'Inbound NAT (INAT - NAT entrant) est un type de NAT pris en charge par les "
"NetScaler, dans lequel l'adresse IP de destination est remplacée dans les "
"paquets provenant du réseau public, comme Internet, par l'adresse IP privée "
"d'une machine virtuelle dans le réseau privé. Le Reverse NAT (RNAT) est un type "
"de NAT pris en charge par les NetScaler, dans lequel l'adresse IP source dans "
"les paquets générés par une machine virtuelle dans le réseau privé  est "
"remplacée par l'adresse IP publique."

# e64823a0214b46d8a6326da740b47131
#: ../../networking2.rst:1113
msgid "This default public IP will be released in two cases:"
msgstr "Cette adresse IP publique par défaut sera libérée dans deux cas :"

# ec3de61219d640b2baa722270d509f9b
#: ../../networking2.rst:1117
msgid ""
"When the VM is stopped. When the VM starts, it again receives a new public IP, "
"not necessarily the same one allocated initially, from the pool of Public IPs."
msgstr ""
"Lorsque la VM est stoppée. Lorsque la VM redémarre, elle reçoit à nouveau une "
"nouvelle IP publique, qui n'est pas nécessairement la même qui avait été "
"initialement attribuée, depuis la réserve d'IP publiques."

# 9429fa004e17414e88ed8a023486ac59
#: ../../networking2.rst:1123
msgid ""
"The user acquires a public IP (Elastic IP). This public IP is associated with "
"the account, but will not be mapped to any private IP. However, the user can "
"enable Static NAT to associate this IP to the private IP of a VM in the account. "
"The Static NAT rule for the public IP can be disabled at any time. When Static "
"NAT is disabled, a new public IP is allocated from the pool, which is not "
"necessarily be the same one allocated initially."
msgstr ""
"L'utilisateur acquiert une IP public (Elastic IP). Cette IP publique est "
"associée au compte, mais ne sera pas mappée à une IP privée. Toutefois, "
"l'utilisateur peut activer le NAT statique pour associer cette adresse IP à "
"l'adresse IP privée d'une machine virtuelle de son compte. La règle de NAT "
"statique pour l'IP publique peut être désactivée à tout moment. Lorsque le NAT "
"statique est désactivé, une nouvelle IP publique est allouée à partir de la "
"réserve, qui n'est pas nécessairement la même ayant été allouée initialement."

# 469830a9248b4593a5aac71adbba4340
#: ../../networking2.rst:1131
msgid ""
"For the deployments where public IPs are limited resources, you have the "
"flexibility to choose not to allocate a public IP by default. You can use the "
"Associate Public IP option to turn on or off the automatic public IP assignment "
"in the EIP-enabled Basic zones. If you turn off the automatic public IP "
"assignment while creating a network offering, only a private IP is assigned to a "
"VM when the VM is deployed with that network offering. Later, the user can "
"acquire an IP for the VM and enable static NAT."
msgstr ""
"Pour les déploiements où les IP publiques sont des ressources limitées, vous "
"avez la possibilité de choisir de ne pas allouer une IP publique par défaut. "
"Vous pouvez utiliser l'option Associer une IP publique pour activer ou "
"désactiver l'affectation d'IP publique automatique dans les zones basiques ayant "
"l'EIP activé. Si vous désactivez l'affectation d'IP publique automatique lors de "
"la création d'une offre réseau, seule une adresse IP privée est affectée à une "
"machine virtuelle lorsque la machine virtuelle est déployée avec cette offre "
"réseau. Plus tard, l'utilisateur peut acquérir une adresse IP pour la VM et "
"activer le NAT statique."

# 0ecd0ac61194408a98281da0aadd9e1a
#: ../../networking2.rst:1140
msgid ""
"For more information on the Associate Public IP option, see `\"Creating a New "
"Network Offering\" <networking.html#creating-a-new-network-offering>`_."
msgstr ""
"Pour plus d'informations sur l'option d'association d'IP publique, consulter `"
"\"Créer une nouvelle offre de réseau\" <networking.html#creating-a-new-network-"
"offering>`_."

# 3cd8dd1307094741b10ebb57dc03d260
#: ../../networking2.rst:1144
msgid ""
"The Associate Public IP feature is designed only for use with user VMs. The "
"System VMs continue to get both public IP and private by default, irrespective "
"of the network offering configuration."
msgstr ""
"La fonctionnalité d'association d'IP publique est conçue uniquement pour les VM "
"utilisateur. Les VM systèmes continuent d'obtenir à la fois une adresse IP "
"publique et une privée par défaut, sans tenir compte de la configuration de "
"l'offre réseau."

# 3ff9c04d9cd44e088c20dfd89e9b3b8b
#: ../../networking2.rst:1148
msgid ""
"New deployments which use the default shared network offering with EIP and ELB "
"services to create a shared network in the Basic zone will continue allocating "
"public IPs to each user VM."
msgstr ""
"Les nouveaux déploiements qui utilisent l'offre de réseau partagé par défaut "
"avec services EIP et ELB pour créer un réseau partagé dans une zone basique vont "
"continuer d'allouer des IP publiques à chaque VM utilisateur."

# 16c8dc460b214f4894425176314b9cb3
#: ../../networking2.rst:1153
msgid "Portable IPs"
msgstr "IPs portable"

# 3a5bf095b28f463397be53d043c810c8
#: ../../networking2.rst:1156
msgid "About Portable IP"
msgstr "A propos des IP portables"

# 5458a5ed86214e4c93481bcc51808719
#: ../../networking2.rst:1158
msgid ""
"Portable IPs in CloudStack are region-level pool of IPs, which are elastic in "
"nature, that can be transferred across geographically separated zones. As an "
"administrator, you can provision a pool of portable public IPs at region level "
"and are available for user consumption. The users can acquire portable IPs if "
"admin has provisioned portable IPs at the region level they are part of. These "
"IPs can be use for any service within an advanced zone. You can also use "
"portable IPs for EIP services in basic zones."
msgstr ""
"Les IP portables dans CloudStack sont des réserves d'adresses IP de niveau "
"région, qui sont élastiques de nature, qui peuvent être transférées entre zones "
"géographiquement séparées. En tant qu'administrateur, vous pouvez provisionner "
"un ensemble d'IP publiques portables au niveau de la région et les rendre "
"disponibles pour utilisation par les utilisateurs. Les utilisateurs peuvent "
"acquérir des adresses IP portables si l'administrateur a fourni des IP portables "
"au niveau de la région dont ils font partie. Ces IP peuvent être utilisées pour "
"n'importe quel service dans une zone avancée. Vous pouvez également utiliser des "
"adresses IP portables pour les services EIP dans les zones basiques."

# 7315df7ef52e4cf1b934b6af1441d884
#: ../../networking2.rst:1167
msgid "The salient features of Portable IP are as follows:"
msgstr "Les principales caractéristiques d'une IP portable sont :"

# 891115e5cf6a48ada1f4095573352338
#: ../../networking2.rst:1171
msgid "IP is statically allocated"
msgstr "L'IP est allouée de manière statique"

# 4d10cf62b6c743b8b592cc802be6cc92
#: ../../networking2.rst:1175
msgid "IP need not be associated with a network"
msgstr "Il n'est pas nécessaire d'associer une IP à un réseau"

# 24d3e403f0aa4c39ad463d1fa0ae207d
#: ../../networking2.rst:1179
msgid "IP association is transferable across networks"
msgstr "L'association d'IP est transférable entre les réseaux."

# 74cb916a3d374a76b971841f8b2379a5
#: ../../networking2.rst:1183
msgid "IP is transferable across both Basic and Advanced zones"
msgstr ""
"Les IP sont transférables entre à la fois les zones basiques et les zones "
"avancées."

# 7d33ab9a52444bbe9b3f7b3128209e6b
#: ../../networking2.rst:1187
msgid "IP is transferable across VPC, non-VPC isolated and shared networks"
msgstr ""
"Une IP est transférable entre VPC et les réseaux partagés ou isolés non-VPC"

# df1a612ddd7d4098a0ddf9b83ad8a93e
#: ../../networking2.rst:1191
msgid "Portable IP transfer is available only for static NAT."
msgstr "Le transfert d'IP portable n'est disponible que pour le NAT static."

# bb4f9954dc894d61abfa568fb2e16957
#: ../../networking2.rst:1196
msgid ""
"Before transferring to another network, ensure that no network rules (Firewall, "
"Static NAT, Port Forwarding, and so on) exist on that portable IP."
msgstr ""
"Avant de transférer à un autre réseau, assurez vous qu'aucune règle réseau (Pare-"
"feu, Static Nat, Redirection de port, etc.) n'existe sur cette IP portable."

# 6219f205752d4e34a5f1fbf3a5de51cc
#: ../../networking2.rst:1201
msgid "Configuring Portable IPs"
msgstr "Configuration des IP portables"

# d64282ef04d447a599ddece7139055f7
#: ../../networking2.rst:1209
msgid "In the left navigation, click Regions."
msgstr "Dans la barre de navigation de gauche, cliquer sur Régions."

# 8b31c7af9d8541d79d6b98d0ed76d82d
#: ../../networking2.rst:1213
msgid "Choose the Regions that you want to work with."
msgstr "Choisir les régions avec lesquelles vous voulez travailler."

# 1938f07ea2c94222a20b08898972dc0c
#: ../../networking2.rst:1217
msgid "Click View Portable IP."
msgstr "Cliquer sur voir l'IP Portable."

# 3fd59fc0c5804ab58ed115888d070d9d
#: ../../networking2.rst:1221
msgid "Click Portable IP Range."
msgstr "Cliquer sur la plage d'IP portable"

# 289d79706e0d4aac949867e57202c169
#: ../../networking2.rst:1223
msgid "The Add Portable IP Range window is displayed."
msgstr "La fenêtre Ajouter une plage d'IP portable s'affiche."

# 6ba39db9be5d430986ffe15997a7b655
#: ../../networking2.rst:1231
msgid ""
"**Start IP/ End IP**: A range of IP addresses that are accessible from the "
"Internet and will be allocated to guest VMs. Enter the first and last IP "
"addresses that define a range that CloudStack can assign to guest VMs."
msgstr ""
"**IP de début, IP de fin** : Une plage d'adresses IP qui sera accessible depuis "
"Internet et sera associée aux VM invités. Saisir la première et la dernière "
"adresse qui définissent une plage que CloudStack peut assigner aux VM invités."

# a79eef6844454a7e8d9fe27202723b53
#: ../../networking2.rst:1238
msgid ""
"**Gateway**: The gateway in use for the Portable IP addresses you are "
"configuring."
msgstr ""
"**Passerelle** : La passerelle à utiliser pour les adresses IP portables que "
"vous êtes en train de configurer."

# ade2b585b1ff4b51b25c1f72d1f5a03e
#: ../../networking2.rst:1243
msgid "**Netmask**: The netmask associated with the Portable IP range."
msgstr ""
"**Masque de sous-réseau** : Le masque de sous-réseau associé avec la plage d'IP "
"portable."

# 2cce53fcfa9e4ebdb7cec25d4dd3f797
#: ../../networking2.rst:1247
msgid "**VLAN**: The VLAN that will be used for public traffic."
msgstr "**VLAN** : Le VLAN qui va être utilisé pour le trafic public."

# 5c4576cb4d01410ea44f66b3560eec1c
#: ../../networking2.rst:1254
msgid "Acquiring a Portable IP"
msgstr "Aquérir une IP portable"

# fd1b3a3c5e574a7ebb4e782d04f0746b
# 3ec5393b7aa8486ca2b52df1597e7a98
# b4889435dd5a4b8986acad62a13ddd6a
# bfc4acd9c38f49138744c5671d7deb8b
# 9eae88f558024bafa1c71d5b5f8f6d94
#: ../../networking2.rst:1266 ../../networking2.rst:3292 ../../networking2.rst:3335
#: ../../networking2.rst:3378 ../../networking2.rst:3452
msgid "Click the name of the network where you want to work with."
msgstr "Cliquez sur le nom du réseau avec lequel vous souhaitez travailler."

# e986c959252444b99b7c5594762994fb
# 2809642deff2421db1593ab57615dc68
# d64bfe77233d4d59b07129a931a574b3
# 15c8b96721f3464380599d2d5d2f02bc
# 9751f6d58300447198381c3549bd481e
# f8c3a0b896d14361b59692083c989410
# 4bccc75dc7d0449097629003483b3545
#: ../../networking2.rst:1270 ../../networking2.rst:2223 ../../networking2.rst:3296
#: ../../networking2.rst:3339 ../../networking2.rst:3382 ../../networking2.rst:3456
#: ../../networking2.rst:3870
msgid "Click View IP Addresses."
msgstr "Cliquez sur Voir les adresses IP."

# 667a207d51d24ec19784a9167e8565b8
# 5605f1edaf4a463a84ae99cdd32825a4
#: ../../networking2.rst:1274 ../../networking2.rst:3300
msgid "Click Acquire New IP."
msgstr "Cliquer sur Acquérir une nouvelle IP."

# 6f484ad19a9e4e70b96bf198ddbcf3f4
# ac45a6f42e5e42a29e4eb09f827d12a3
#: ../../networking2.rst:1276 ../../networking2.rst:3302
msgid "The Acquire New IP window is displayed."
msgstr "La fenêtre Acquérir une nouvelle IP est affichée."

# a62089adc7304fe1a0c39b6e337ddca2
# 9baf10608a674ae292c3dea0a0859da7
#: ../../networking2.rst:1280 ../../networking2.rst:3306
msgid "Specify whether you want cross-zone IP or not."
msgstr "Spécifier si vous voulez une IP transverse à la zone ou non."

# 3bb7d4dc99f341248a9c5c892bc12485
#: ../../networking2.rst:1284
msgid "Click Yes in the confirmation dialog."
msgstr "Cliquer sur Oui dans la boite de dialogue de confirmation."

# 38c1b6967ebb4ec9852ba01c1f005f98
# 197a1c50649d486ca45fb94f4900aa2d
#: ../../networking2.rst:1286 ../../networking2.rst:3314
msgid ""
"Within a few moments, the new IP address should appear with the state Allocated. "
"You can now use the IP address in port forwarding or static NAT rules."
msgstr ""
"Après quelques instants, la nouvelle adresse IP devrait apparaître avec l'état "
"Allouée. Vous pouvez utiliser l'adresse IP dans la redirection de port ou les "
"règles de NATage statiques."

# 524a4bfc4e03495584030002db87273b
#: ../../networking2.rst:1291
msgid "Transferring Portable IP"
msgstr "Transférer une IP Portable"

# 68465770f0cb4381ac7ce0eb0b65ecbc
#: ../../networking2.rst:1293
msgid ""
"An IP can be transferred from one network to another only if Static NAT is "
"enabled. However, when a portable IP is associated with a network, you can use "
"it for any service in the network."
msgstr ""
"Une IP peut être transférée depuis un réseau vers un autre seulement si le "
"Static NAT est activé. Cependant, lorsqu'une IP portable est associée à un "
"réseau, vous pouvez l'utiliser pour n'importe quel service du réseau."

# b51d59c49aad4d2c82dc7ff551a1e515
#: ../../networking2.rst:1297
msgid "To transfer a portable IP across the networks, execute the following API:"
msgstr ""
"Pour transférer une IP portable entre des réseaux, exécutez l'API suivante :"

# baaa47d9664443df8004dbd797ca37f0
#: ../../networking2.rst:1304
msgid ""
"Replace the UUID with appropriate UUID. For example, if you want to transfer a "
"portable IP to network X and VM Y in a network, execute the following:"
msgstr ""
"Remplacez l'UUID par l'UUID approprié. Par exemple, si vous souhaitez transférer "
"une adresse IP portable vers le réseau X et une VM Y dans un réseau, exécutez "
"les opérations suivantes:"

# 2ab16bedc435498fa54a92c12d41873b
#: ../../networking2.rst:1313
msgid "Multiple Subnets in Shared Network"
msgstr "Plusieurs sous-réseaux au sein d'un Réseau Partagé"

# 052e7dd83a5d49f6830d255583296f7d
#: ../../networking2.rst:1315
msgid ""
"CloudStack provides you with the flexibility to add guest IP ranges from "
"different subnets in Basic zones and security groups-enabled Advanced zones. For "
"security groups-enabled Advanced zones, it implies multiple subnets can be added "
"to the same VLAN. With the addition of this feature, you will be able to add IP "
"address ranges from the same subnet or from a different one when IP address are "
"exhausted. This would in turn allows you to employ higher number of subnets and "
"thus reduce the address management overhead. You can delete the IP ranges you "
"have added."
msgstr ""
"CloudStack offre la flexibilité d'ajouter des plages d'IP d'invité à partir de "
"différents sous-réseaux dans les zones Basiques et dans les zones Avancées avec "
"groupes de sécurité. Pour les zones avancées avec groupes de sécurité, cela "
"implique que plusieurs sous-réseaux puissent être ajoutés au même VLAN. Grâce à "
"cette fonctionnalité, vous pourrez ajouter des plages d'adresses IP à partir du "
"même sous-réseau ou à partir d'un autre lorsque les adresses IP sont épuisées. "
"Cela permet au final d'utiliser un plus grand nombre de sous-réseaux et de "
"réduire ainsi la charge de travail liée à la gestion des adresses. Vous pouvez "
"supprimer les plages IP que vous avez ajoutées."

# 39d6185c2a9142778ebfcfaa45d53ea4
# a87fd7c6cc4d4983be85e89d3f15de49
# dff9442af85b489c8e6c974a633e5646
#: ../../networking2.rst:1326 ../../networking2.rst:2963 ../../networking2.rst:3510
msgid "Prerequisites and Guidelines"
msgstr "Prérequis et lignes directrives"

# b12da91685134a71866c8fa74aeaa4de
#: ../../networking2.rst:1330
msgid "This feature can only be implemented:"
msgstr "Cette fonctionnalité ne peut seulement être implémentée :"

# 1393ad33a993459f81ea3de1149b6a09
#: ../../networking2.rst:1334
msgid "on IPv4 addresses"
msgstr "Sur des adresses IPv4"

# 4764589edb39403a9fd8558614490a61
#: ../../networking2.rst:1338
msgid "if virtual router is the DHCP provider"
msgstr "Si le routeur virtuel est le fournisseur DHCP"

# b1541de5c3f0486faa35809ad77b0359
#: ../../networking2.rst:1342
msgid "on KVM, xenServer, and VMware hypervisors"
msgstr "Sur les hyperviseurs KVM, xenServer et VMware"

# 2422d92308cd49628de0caa0efcad9c7
#: ../../networking2.rst:1346
msgid ""
"Manually configure the gateway of the new subnet before adding the IP range."
msgstr ""
"Configurez manuellement la passerelle du nouveau sous-réseau avant d'ajouter la "
"plage d'IP."

# bf5e159cb4c54583a861e417824b26a3
#: ../../networking2.rst:1351
msgid ""
"CloudStack supports only one gateway for a subnet; overlapping subnets are not "
"currently supported"
msgstr ""
"CloudStack supporte une seule passerelle par sous-réseau ; le chevauchement de "
"réseau n'est pas actuellement pris en compte."

# 7e64cd24270240e9bef22bc1491bf837
#: ../../networking2.rst:1355
msgid "Adding Multiple Subnets to a Shared Network"
msgstr "Ajout de plusieurs sous-réseaux à un Réseau Partagé"

# 1f05243395c24667a0f7e9c75bbc190f
#: ../../networking2.rst:1367
msgid ""
"On Zones, click View More, then click the zone to which you want to work with.."
msgstr ""
"Sur Zones, cliquer sur Voir plus, puis cliquer sur la zone avec laquelle vous "
"voulez travailler."

# 2b58f0a641ae4d80a61839330e31435b
#: ../../networking2.rst:1372
msgid "Click Physical Network."
msgstr "Cliquer sur le réseau physique."

# 01147d3437e04c6c93201551e05eec93
#: ../../networking2.rst:1380
msgid "Click Networks."
msgstr "Cliquer sur Réseaux."

# f5611c1c2d6f4bc2935f6fcb462429ac
#: ../../networking2.rst:1384
msgid "Select the networks you want to work with."
msgstr "Choisir les réseaux avec lesquelles vous voulez travailler."

# 8c8af6183f054d4b87cd5369985f279b
#: ../../networking2.rst:1388
msgid "Click View IP Ranges."
msgstr "Cliquer sur Voir les intervalles IP."

# 27bfee4a94154becadc04d190e2248f0
#: ../../networking2.rst:1392
msgid "Click Add IP Range."
msgstr "Cliquer sur la plage d'IP portable"

# 0b8e9d89d4724266b4f358cddb5b5dae
#: ../../networking2.rst:1394
msgid "The Add IP Range dialog is displayed, as follows:"
msgstr "La boîte de dialogue Ajouter un intervalle IP s'affiche comme suit :"

# b80689bd7547487da595f615e2462e55
#: ../../networking2.rst:1396
msgid "|add-ip-range.png|"
msgstr "|add-ip-range.png|"

# ecfac85bd0504455b3d64af38c930d89
# b0284174465747738037a24f289b32cd
#: ../../networking2.rst:1402 ../../networking2.rst:5168
msgid "All the fields are mandatory."
msgstr "Tous les champs sont obligatoires."

# 2a42d646d37c4df6add5bdf38ceca64d
# d96a1cf974414215858b14602328707b
#: ../../networking2.rst:1406 ../../networking2.rst:5186
msgid ""
"**Gateway**: The gateway for the tier you create. Ensure that the gateway is "
"within the Super CIDR range that you specified while creating the VPC, and is "
"not overlapped with the CIDR of any existing tier within the VPC."
msgstr ""
"**Passerelle** : La passerelle pour le segment que vous créez. S'assurer que la "
"passerelle est inclue dans l'intervalle du Super CIDR que vous avez spécifié "
"lors de la création du VPC et qu'elle n'est pas en conflit avec un segment "
"existant du VPC."

# 135026f2c8ab4d77a877e4d100640178
# 035c6987b29147ebb036cad74b0ca7e2
#: ../../networking2.rst:1413 ../../networking2.rst:5203
msgid "**Netmask**: The netmask for the tier you create."
msgstr ""
"**Masque de sous-réseau** : Le masque de sous-réseau pour le segment que vous "
"créez."

# ff580244e12e4780b2df473d710b2271
# 8323a108551a443f8e02e4e8bf7cb1cc
#: ../../networking2.rst:1415 ../../networking2.rst:5205
msgid ""
"For example, if the VPC CIDR is 10.0.0.0/16 and the network tier CIDR is "
"10.0.1.0/24, the gateway of the tier is 10.0.1.1, and the netmask of the tier is "
"255.255.255.0."
msgstr ""
"Par exemple, si le CIDR du VPC est 10.0.0.0/16 et que le réseau CIDR du tiers "
"est 10.0.1.0/24, la passerelle du tiers est 10.0.1.1, et le masque de sous "
"réseau du tiers est 255.255.255.0. "

# e68e024d0d01404c95c2dfc37f213a3e
#: ../../networking2.rst:1421
msgid ""
"**Start IP/ End IP**: A range of IP addresses that are accessible from the "
"Internet and will be allocated to guest VMs. Enter the first and last IP "
"addresses that define a range that CloudStack can assign to guest VMs ."
msgstr ""
"**IP de début, IP de fin** : Une plage d'adresses IP qui sera accessible depuis "
"Internet et sera associée aux VM invités. Saisir la première et la dernière "
"adresse qui définissent une plage que CloudStack peut assigner aux VM invités."

# 878c548f176b4ef18a4c21be8ace7a7b
#: ../../networking2.rst:1431
msgid "Isolation in Advanced Zone Using Private VLAN"
msgstr "Isolation en Zone Avancée par Private VLAN"

# a24c2265540a4aef9c82390bf465ff16
#: ../../networking2.rst:1433
msgid ""
"Isolation of guest traffic in shared networks can be achieved by using Private "
"VLANs (PVLAN). PVLANs provide Layer 2 isolation between ports within the same "
"VLAN. In a PVLAN-enabled shared network, a user VM cannot reach other user VM "
"though they can reach the DHCP server and gateway, this would in turn allow "
"users to control traffic within a network and help them deploy multiple "
"applications without communication between application as well as prevent "
"communication with other users' VMs."
msgstr ""
"L'isolation du trafic invité dans les réseaux partagés peut être obtenue en "
"utilisant les Private VLANs  (PVLAN). Les PVLANs fournissent une isolation de "
"niveau 2 entre les ports au sein du même VLAN. Dans un réseau partagé avec "
"PVLAN, une VM utilisateur ne peut pas joindre la VM d'un autre utilisateur même "
"si elles peuvent joindre leur serveur DHCP et la passerelle, cela permet aux "
"utilisateurs de gérer leur trafic au sein d'un réseau et les aide à déployer "
"plusieurs applications sans communication aussi bien entre elles qu'avec les VMs "
"des autres utilisateurs."

# 4a22b32ca020436b81dd8f07f34306f4
#: ../../networking2.rst:1444
msgid "Isolate VMs in a shared networks by using Private VLANs."
msgstr "Isoler les VM dans des réseaux partagés en utilisant les Private VLANs."

# abb78195383c40838e8616f04b87f7f2
#: ../../networking2.rst:1448
msgid "Supported on KVM, XenServer, and VMware hypervisors"
msgstr "Supportée par les hyperviseurs KVM, XenServer et VMware."

# 2b02488a70fc420996644982994ac6eb
#: ../../networking2.rst:1452
msgid ""
"PVLAN-enabled shared network can be a part of multiple networks of a guest VM."
msgstr "Un réseau partagé avec PVLAN peut être un des réseaux d'une VM invité."

# d86c07b7947d412799db280d59e3f9e5
#: ../../networking2.rst:1456
msgid "About Private VLAN"
msgstr "A propos des VLAN Privés"

# 892b94b696954a8e9527248d969742c6
#: ../../networking2.rst:1458
msgid ""
"In an Ethernet switch, a VLAN is a broadcast domain where hosts can establish "
"direct communication with each another at Layer 2. Private VLAN is designed as "
"an extension of VLAN standard to add further segmentation of the logical "
"broadcast domain. A regular VLAN is a single broadcast domain, whereas a private "
"VLAN partitions a larger VLAN broadcast domain into smaller sub-domains. A sub-"
"domain is represented by a pair of VLANs: a Primary VLAN and a Secondary VLAN. "
"The original VLAN that is being divided into smaller groups is called Primary, "
"which implies that all VLAN pairs in a private VLAN share the same Primary VLAN. "
"All the secondary VLANs exist only inside the Primary. Each Secondary VLAN has a "
"specific VLAN ID associated to it, which differentiates one sub-domain from "
"another."
msgstr ""
"Dans un commutateur Ethernet, un VLAN est un domaine de diffusion dans lequel "
"les hôtes peuvent établir une communication directe entre eux au niveau de la "
"couche 2. Les VLANs privés sont conçus comme une extension du standard VLAN pour "
"ajouter une segmentation supplémentaire au domaine de diffusion logique. Un VLAN "
"standard est un domaine de diffusion unique, tandis qu'un VLAN privé partitionne "
"un plus grand domaine de diffusion VLAN en sous-domaines plus petits. Un sous-"
"domaine est représenté par une paire de VLANs : un VLAN primaire et un VLAN "
"secondaire. Le VLAN original qui est divisé en petits groupes est appelé "
"Primary, ce qui implique que toutes les paires de VLAN d'un VLAN privé partagent "
"le même VLAN primaire. Tous les VLAN secondaires existent uniquement à "
"l'intérieur du Primary. Chaque VLAN secondaire dispose d'un identifiant de VLAN "
"spécifique qui lui est associé, ce qui différencie un sous-domaine d'un autre."

# 65264ae745f94985b736d5abe4446401
#: ../../networking2.rst:1471
msgid ""
"Three types of ports exist in a private VLAN domain, which essentially determine "
"the behaviour of the participating hosts. Each ports will have its own unique "
"set of rules, which regulate a connected host's ability to communicate with "
"other connected host within the same private VLAN domain. Configure each host "
"that is part of a PVLAN pair can be by using one of these three port designation:"
msgstr ""
"Trois types de ports existent dans un domaine de VLAN privés, qui déterminent "
"essentiellement le comportement des hôtes participants. Chaque port aura son "
"propre ensemble unique de règles qui réglementent la capacité d'un hôte connecté "
"à communiquer avec un autre hôte connecté dans le même domaine VLAN privé. "
"Configurer chaque hôte faisant partie d'une paire de PVLAN peut être effectué en "
"utilisant l'une de ces trois types de port :"

# 65ce874571f0428cbe807261ef5c91ff
#: ../../networking2.rst:1480
msgid ""
"**Promiscuous**: A promiscuous port can communicate with all the interfaces, "
"including the community and isolated host ports that belong to the secondary "
"VLANs. In Promiscuous mode, hosts are connected to promiscuous ports and are "
"able to communicate directly with resources on both primary and secondary VLAN. "
"Routers, DHCP servers, and other trusted devices are typically attached to "
"promiscuous ports."
msgstr ""
"**Promiscuous** : un port Promiscuous peut communiquer avec toutes les "
"interfaces, incluant les ports de la communauté et les hôtes isolés qui "
"appartiennent aux VLANs secondaires. En mode Promiscuous, les hôtes sont "
"connectés aux ports promiscuous et sont capables de communiquer directement avec "
"les ressources à la fois du VLAN primaire et secondaire. Les routeurs, les "
"serveurs DHCP, et les autres périphériques de confiance sont typiquement "
"attachés aux ports promiscuous."

# 11d7e1e2a07f44da85da53d61de9130b
#: ../../networking2.rst:1490
msgid ""
"**Isolated VLANs**: The ports within an isolated VLAN cannot communicate with "
"each other at the layer-2 level. The hosts that are connected to Isolated ports "
"can directly communicate only with the Promiscuous resources. If your customer "
"device needs to have access only to a gateway router, attach it to an isolated "
"port."
msgstr ""
"**VLANs isolés** : Les ports d'un VLAN isolé ne peuvent pas communiquer entre "
"eux au niveau de la couche 2. Les hôtes connectés à des ports isolés ne peuvent "
"seulement communiquer directement qu'avec les ressources Promiscuous. Si votre "
"périphérique client a besoin d'avoir accès uniquement à un routeur/passerelle, "
"connectez-le à un port isolé."

# c008cae9b2a74d48a4170c54a17a63d6
#: ../../networking2.rst:1498
msgid ""
"**Community VLANs**: The ports within a community VLAN can communicate with each "
"other and with the promiscuous ports, but they cannot communicate with the ports "
"in other communities at the layer-2 level. In a Community mode, direct "
"communication is permitted only with the hosts in the same community and those "
"that are connected to the Primary PVLAN in promiscuous mode. If your customer "
"has two devices that need to be isolated from other customers' devices, but to "
"be able to communicate among themselves, deploy them in community ports."
msgstr ""
"**VLAN communautaires** : Les ports au sein d'un VLAN communautaire peuvent "
"communiquer entre eux et avec les ports promiscuous, mais ils ne peuvent pas "
"communiquer avec les ports d'autres communautés au niveau de la couche 2. Dans "
"un mode communautaire, la communication directe est autorisée uniquement avec "
"les hôtes de la même communauté et ceux qui sont connectés au PVLAN primaire en "
"mode promiscuous. Si votre client a deux périphériques qui doivent être isolés "
"des périphériques d'autres clients, mais doivent pouvoir communiquer entre eux, "
"déployez-les dans des ports communautaires."

# eca73570aa5c496ba46877b3392feba4
#: ../../networking2.rst:1508
msgid "For further reading:"
msgstr "Pour plus d'informations :"

# 3fb1a7985e5143939ea6ed3db5517634
#: ../../networking2.rst:1512
msgid ""
"`Understanding Private VLANs <http://www.cisco.com/en/US/docs/switches/lan/"
"catalyst3750/software/release/12.2_25_see/configuration/guide/swpvlan."
"html#wp1038379>`_"
msgstr ""
"`Comprendre les VLANs privés <http://www.cisco.com/en/US/docs/switches/lan/"
"catalyst3750/software/release/12.2_25_see/configuration/guide/swpvlan."
"html#wp1038379>`_"

# 413321509f2d47a8b184ec2e8adbfcb5
#: ../../networking2.rst:1517
msgid ""
"`Cisco Systems' Private VLANs: Scalable Security in a Multi-Client Environment "
"<http://tools.ietf.org/html/rfc5517>`_"
msgstr ""
"`Cisco Systems' Private VLANs: Scalable Security in a Multi-Client Environment "
"<http://tools.ietf.org/html/rfc5517>`_"

# d92ce4bc2e25409b903ed61ed410286d
#: ../../networking2.rst:1522
msgid ""
"`Private VLAN (PVLAN) on vNetwork Distributed Switch - Concept Overview "
"(1010691) <http://kb.vmware.com>`_"
msgstr ""
"`VLAN Privés (PVLAN) sur les vNetwork Distributed Switch - Concept Overview "
"(1010691) <http://kb.vmware.com>`_"

# 7b72e0b764624a06bcaed4e13da2da3d
#: ../../networking2.rst:1530
msgid "Use a PVLAN supported switch."
msgstr "Utiliser un switch supportant les PVLAN."

# 4c3023eb7cbe49fdbc0af7708061b61c
#: ../../networking2.rst:1532
msgid ""
"See `Private VLAN Catalyst Switch Support Matrix <http://www.cisco.com/en/US/"
"products/hw/switches/ps708/products_tech_note09186a0080094830.shtml>`_ for more "
"information."
msgstr ""
"Voir `La matrice de support des VLAN privés des commutateurs Catalyst <http://"
"www.cisco.com/en/US/products/hw/switches/ps708/"
"products_tech_note09186a0080094830.shtml>`_ pour plus d'informations."

# 3d53c6dd5e0c47c98d6a7945385c1baa
#: ../../networking2.rst:1538
msgid ""
"All the layer 2 switches, which are PVLAN-aware, are connected to each other, "
"and one of them is connected to a router. All the ports connected to the host "
"would be configured in trunk mode. Open Management VLAN, Primary VLAN (public) "
"and Secondary Isolated VLAN ports. Configure the switch port connected to the "
"router in PVLAN promiscuous trunk mode, which would translate an isolated VLAN "
"to primary VLAN for the PVLAN-unaware router."
msgstr ""
"Tous les commutateurs de la couche 2, qui sont PVLAN-aware, sont connectés les "
"uns aux autres, et l'un d'entre eux est connecté à un routeur. Tous les ports "
"connectés à l'hôte seront configurés en mode trunk. Open Management VLAN, VLAN "
"primaire (public) et ports VLAN isolés secondaires. Configurez le port du "
"commutateur connecté au routeur dans le mode PVLAN promiscuous trunk, qui "
"devrait traduire un VLAN isolé en VLAN primaire pour le routeur qui lui n'a pas "
"connaissance de PVLAN."

# c0a596996cd541c399ba489470a762f3
#: ../../networking2.rst:1546
msgid ""
"Note that only Cisco Catalyst 4500 has the PVLAN promiscuous trunk mode to "
"connect both normal VLAN and PVLAN to a PVLAN-unaware switch. For the other "
"Catalyst PVLAN support switch, connect the switch to upper switch by using "
"cables, one each for a PVLAN pair."
msgstr ""
"Notez que seul le Cisco Catalyst 4500 dispose du mode de trunk promiscuous "
"PVLAN, permettant de connecter à la fois des VLAN normaux et des PVLAN à un "
"commutateur incompatible avec PVLAN. Pour les autres commutateurs Catalyst "
"supportant les PVLAN, connectez le commutateur au commutateur supérieur en "
"utilisant un câble par paire de PVLAN."

# cc4e6fc0e1f245528985b2117be84d9f
#: ../../networking2.rst:1553
msgid "Configure private VLAN on your physical switches out-of-band."
msgstr "Configurer les VLAN privés sur les commutateurs physiques  out-of-band."

# 62074ec8d4834007976930e3c6191196
#: ../../networking2.rst:1557
msgid "Before you use PVLAN on XenServer and KVM, enable Open vSwitch (OVS)."
msgstr ""
"Avant d'utiliser les PVLAN sur XenServer et KVM, activez Open vSwitch (OVS)."

# 801f968d2c41437ab6df2a4e4ba571f9
#: ../../networking2.rst:1560
msgid ""
"OVS on XenServer and KVM does not support PVLAN natively. Therefore, CloudStack "
"managed to simulate PVLAN on OVS for XenServer and KVM by modifying the flow "
"table."
msgstr ""
"OVS sur XenServer et KVM ne supporte pas les PVLAN nativement. Par conséquent, "
"CloudStack s'arrange pour simuler les PVLAN sur OVS pour XenServer et KVM en "
"modifiant la table des flux."

# 11c21ce678fe4324bddd45de27ee2be7
#: ../../networking2.rst:1565
msgid "Creating a PVLAN-Enabled Guest Network"
msgstr "Créer un réseau invité avec PVLAN"

# 3a96dbbceb574c5fa075e67bf6efd8eb
#: ../../networking2.rst:1625
msgid ""
"**Secondary Isolated VLAN ID**: The unique ID of the Secondary Isolated VLAN."
msgstr "**ID du VLAN secondaire isolé** : L'ID unique du VLAN secondaire isolé."

# 7030034cd1d8428a993a53ec2cf81a4b
#: ../../networking2.rst:1628
msgid ""
"For the description on Secondary Isolated VLAN, see `About Private VLAN\" "
"<#about-private-vlan>`_."
msgstr ""
"Pour la description des VLAN isolés secondaires, voir `\"A propos des VLAN privés"
"\" <#about-private-vlan>`_."

# 3334596753684a6cae9e21d47cf11119
#: ../../networking2.rst:1691
msgid "Security Groups"
msgstr "Groupes de sécurités"

# e6afa18d968443a988f9cda5396370a6
#: ../../networking2.rst:1694
msgid "About Security Groups"
msgstr "A propos des groupes de sécurité"

# 12db6b6e0abb441ca307862c39b2f3a7
#: ../../networking2.rst:1696
msgid ""
"Security groups provide a way to isolate traffic to VMs. A security group is a "
"group of VMs that filter their incoming and outgoing traffic according to a set "
"of rules, called ingress and egress rules. These rules filter network traffic "
"according to the IP address that is attempting to communicate with the VM. "
"Security groups are particularly useful in zones that use basic networking, "
"because there is a single guest network for all guest VMs. In advanced zones, "
"security groups are supported only on the KVM hypervisor."
msgstr ""

# 5e0a423faa66428cb475ef10f065148b
#: ../../networking2.rst:1706
msgid ""
"In a zone that uses advanced networking, you can instead define multiple guest "
"networks to isolate traffic to VMs."
msgstr ""

# d58dc8ccb7ac4d10926fb53edabf176a
#: ../../networking2.rst:1708
msgid ""
"Each CloudStack account comes with a default security group that denies all "
"inbound traffic and allows all outbound traffic. The default security group can "
"be modified so that all new VMs inherit some other desired set of rules."
msgstr ""

# 39f399e25b2f415d8584bd6f5dd19360
#: ../../networking2.rst:1713
msgid ""
"Any CloudStack user can set up any number of additional security groups. When a "
"new VM is launched, it is assigned to the default security group unless another "
"user-defined security group is specified. A VM can be a member of any number of "
"security groups. Once a VM is assigned to a security group, it remains in that "
"group for its entire lifetime; you can not move a running VM from one security "
"group to another."
msgstr ""

# bd1a3a7c766a49568e5d389c615a00fd
#: ../../networking2.rst:1720
msgid ""
"You can modify a security group by deleting or adding any number of ingress and "
"egress rules. When you do, the new rules apply to all VMs in the group, whether "
"running or stopped."
msgstr ""

# a52edc5536e9495bbf1410f462d5932b
#: ../../networking2.rst:1724
msgid ""
"If no ingress rules are specified, then no traffic will be allowed in, except "
"for responses to any traffic that has been allowed out through an egress rule."
msgstr ""

# 7d25ba3d47574104ae0d8c4085970ddc
#: ../../networking2.rst:1729
msgid "Adding a Security Group"
msgstr "Ajouter un groupe de sécurité"

# 4a52e8eaf7f5498e9cac0ef8d3e753bb
#: ../../networking2.rst:1731
msgid "A user or administrator can define a new security group."
msgstr ""
"Un utilisateur ou un administrateur peut définir un nouveau groupe de sécurité."

# a705e539e74940a78a8983f0585d2556
# c227631e574645b2b6062f0bf192b879
#: ../../networking2.rst:1739 ../../networking2.rst:1819
msgid "In the left navigation, choose Network"
msgstr "Dans la navigation à gauche, choisissez Réseau."

# 7c3b2c1204ad4116b2771e974c0cf4c2
#: ../../networking2.rst:1743
msgid "In Select view, choose Security Groups."
msgstr "Dans la zone de sélection, choisir Groupes de Sécurité."

# 721d38433467434482cb1c4486f14572
#: ../../networking2.rst:1747
msgid "Click Add Security Group."
msgstr "Cliquer sur Ajouter un groupe de sécurité."

# 02ecffe07c904fc2a4c3fa6a392afd04
#: ../../networking2.rst:1751
msgid "Provide a name and description."
msgstr "Fournir un nom et une description."

# 3e0ee4bc42fc4ea2a3189f69cde928db
#: ../../networking2.rst:1757
msgid "The new security group appears in the Security Groups Details tab."
msgstr ""
"Le nouveau groupe de sécurité apparaît dans l'onglet Détails des Groupes de "
"Sécurité."

# 1b1ca02aa0b348c1b8d8e92f7dbe459d
#: ../../networking2.rst:1761
msgid ""
"To make the security group useful, continue to Adding Ingress and Egress Rules "
"to a Security Group."
msgstr ""
"Pour rendre le groupe de sécurité utile, continuez par Ajouter des règles "
"Ingress et Egress à un groupe de sécurité."

# 6d68ff5e482a496ea71d636366da8518
#: ../../networking2.rst:1765
msgid "Security Groups in Advanced Zones (KVM Only)"
msgstr "Groupes de Sécurité dans les Zones Avancées (KVM uniquement)"

# bf3e0daa32bd4d928334c6593b3da60d
#: ../../networking2.rst:1767
msgid ""
"CloudStack provides the ability to use security groups to provide isolation "
"between guests on a single shared, zone-wide network in an advanced zone where "
"KVM is the hypervisor. Using security groups in advanced zones rather than "
"multiple VLANs allows a greater range of options for setting up guest isolation "
"in a cloud."
msgstr ""

# a13d1f37385b4e7b86996acde4babec4
#: ../../networking2.rst:1776
msgid "The following are not supported for this feature:"
msgstr ""
"Les éléments suivants ne sont pas pris en charge pour cette fonctionnalité :"

# 8fc8b70b5cde4f87a62e5b1ca4a75e2a
#: ../../networking2.rst:1780
msgid ""
"Two IP ranges with the same VLAN and different gateway or netmask in security "
"group-enabled shared network."
msgstr ""
"Deux plages d'IP avec le même VLAN et une passerelle ou masque de réseau "
"différent dans un réseau partagé avec groupes de sécurité."

# 9afc1351e88841e18eb5fe14fc168913
#: ../../networking2.rst:1785
msgid ""
"Two IP ranges with the same VLAN and different gateway or netmask in account-"
"specific shared networks."
msgstr ""
"Deux plages d'IP avec le même VLAN et une passerelle ou un masque de réseau "
"différent dans des réseaux partagés spécifiques à un compte."

# 964239c4525b49c48d33e98fa19650e7
#: ../../networking2.rst:1790
msgid "Multiple VLAN ranges in security group-enabled shared network."
msgstr "Plusieurs plages de VLAN dans un réseau partagé avec groupes de sécurité."

# 0e18491db0744181b7e4947503a5bf06
#: ../../networking2.rst:1794
msgid "Multiple VLAN ranges in account-specific shared networks."
msgstr ""
"Plusieurs plages de VLAN dans des réseaux partagés spécifiques à un compte."

# 05bc77a1a85b4d40ac91eb83feacc795
#: ../../networking2.rst:1796
msgid ""
"Security groups must be enabled in the zone in order for this feature to be used."
msgstr ""
"Les groupes de sécurité doivent être activés dans la zone pour que cette "
"fonctionnalité soit utilisée."

# e64a176e0d1a4f50992f36b58586ff9e
#: ../../networking2.rst:1800
msgid "Enabling Security Groups"
msgstr "Activer les groupes de sécurités."

# 6ad796b8b65541758fa9ac87509ecbc2
#: ../../networking2.rst:1802
msgid ""
"In order for security groups to function in a zone, the security groups feature "
"must first be enabled for the zone. The administrator can do this when creating "
"a new zone, by selecting a network offering that includes security groups. The "
"procedure is described in Basic Zone Configuration in the Advanced Installation "
"Guide. The administrator can not enable security groups for an existing zone, "
"only when creating a new zone."
msgstr ""

# e2ba36a71c01454c872db51e3f32589d
#: ../../networking2.rst:1811
msgid "Adding Ingress and Egress Rules to a Security Group"
msgstr "Ajout de règles Ingress et Egress à un Groupe de Sécurité"

# a1a516287e0441a7bfff434dc4c25818
#: ../../networking2.rst:1823
msgid ""
"In Select view, choose Security Groups, then click the security group you want ."
msgstr ""
"Dans la liste de choix, choisir Groupes de sécurité puis cliquer sur le groupe "
"de sécurité désiré."

# d6e55c16dfbc4f85a9169f71f66a2804
#: ../../networking2.rst:1828
msgid ""
"To add an ingress rule, click the Ingress Rules tab and fill out the following "
"fields to specify what network traffic is allowed into VM instances in this "
"security group. If no ingress rules are specified, then no traffic will be "
"allowed in, except for responses to any traffic that has been allowed out "
"through an egress rule."
msgstr ""

# 42943b264de7449685e9e46efc6a170c
#: ../../networking2.rst:1836
msgid ""
"**Add by CIDR/Account**. Indicate whether the source of the traffic will be "
"defined by IP address (CIDR) or an existing security group in a CloudStack "
"account (Account). Choose Account if you want to allow incoming traffic from all "
"VMs in another security group"
msgstr ""

# e2cc45d1de64494db50fe0a1c454f1de
#: ../../networking2.rst:1844
msgid ""
"**Protocol**. The networking protocol that sources will use to send traffic to "
"the security group. TCP and UDP are typically used for data exchange and end-"
"user communications. ICMP is typically used to send error messages or network "
"monitoring data."
msgstr ""

# 3830ab6e902f4099a0d5bcd5f94c98f9
#: ../../networking2.rst:1851
msgid ""
"**Start Port, End Port**. (TCP, UDP only) A range of listening ports that are "
"the destination for the incoming traffic. If you are opening a single port, use "
"the same number in both fields."
msgstr ""

# 8964c7df1073444194c59e9ddf9726c6
#: ../../networking2.rst:1857
msgid ""
"**ICMP Type, ICMP Code**. (ICMP only) The type of message and error code that "
"will be accepted."
msgstr ""

# b0cf8f7cc93e4879aab846412508fb1a
#: ../../networking2.rst:1862
msgid ""
"**CIDR**. (Add by CIDR only) To accept only traffic from IP addresses within a "
"particular address block, enter a CIDR or a comma-separated list of CIDRs. The "
"CIDR is the base IP address of the incoming traffic. For example, "
"192.168.0.0/22. To allow all CIDRs, set to 0.0.0.0/0."
msgstr ""

# 76c5ca0cfe334149a512d3956349b0df
#: ../../networking2.rst:1870
msgid ""
"**Account, Security Group**. (Add by Account only) To accept only traffic from "
"another security group, enter the CloudStack account and name of a security "
"group that has already been defined in that account. To allow traffic between "
"VMs within the security group you are editing now, enter the same name you used "
"in step 7."
msgstr ""

# 3903c6ce7d964ff99823291ab66fd97e
#: ../../networking2.rst:1876
msgid "The following example allows inbound HTTP access from anywhere:"
msgstr "L'exemple qui suit autorise l'accès HTTP entrant depuis n'importe où :"

# 0ca36e66c67f4b0fbc6e9642f98244e2
#: ../../networking2.rst:1878
msgid "|httpaccess.png|"
msgstr "|httpaccess.png|"

# 0e328d3fe5ff4d199d094778ca339694
#: ../../networking2.rst:1882
msgid ""
"To add an egress rule, click the Egress Rules tab and fill out the following "
"fields to specify what type of traffic is allowed to be sent out of VM instances "
"in this security group. If no egress rules are specified, then all traffic will "
"be allowed out. Once egress rules are specified, the following types of traffic "
"are allowed out: traffic specified in egress rules; queries to DNS and DHCP "
"servers; and responses to any traffic that has been allowed in through an "
"ingress rule"
msgstr ""

# 6345c89e81524779ab6e143c18064dbf
#: ../../networking2.rst:1893
msgid ""
"**Add by CIDR/Account**. Indicate whether the destination of the traffic will be "
"defined by IP address (CIDR) or an existing security group in a CloudStack "
"account (Account). Choose Account if you want to allow outgoing traffic to all "
"VMs in another security group."
msgstr ""

# 3aacbdb631954d769b273926968b7e76
#: ../../networking2.rst:1901
msgid ""
"**Protocol**. The networking protocol that VMs will use to send outgoing "
"traffic. TCP and UDP are typically used for data exchange and end-user "
"communications. ICMP is typically used to send error messages or network "
"monitoring data."
msgstr ""

# bf325442015447ccacf5f769195e3e42
#: ../../networking2.rst:1908
msgid ""
"**Start Port, End Port**. (TCP, UDP only) A range of listening ports that are "
"the destination for the outgoing traffic. If you are opening a single port, use "
"the same number in both fields."
msgstr ""

# 6018cd1041b946a9a0e09343687a2ef2
#: ../../networking2.rst:1914
msgid ""
"**ICMP Type, ICMP Code**. (ICMP only) The type of message and error code that "
"will be sent"
msgstr ""

# dcedb9aa8a5f45fc8708767a08ba30e5
#: ../../networking2.rst:1919
msgid ""
"**CIDR**. (Add by CIDR only) To send traffic only to IP addresses within a "
"particular address block, enter a CIDR or a comma-separated list of CIDRs. The "
"CIDR is the base IP address of the destination. For example, 192.168.0.0/22. To "
"allow all CIDRs, set to 0.0.0.0/0."
msgstr ""

# 7fe28834c4e944fa960b6bc798395bb8
#: ../../networking2.rst:1927
msgid ""
"**Account, Security Group**. (Add by Account only) To allow traffic to be sent "
"to another security group, enter the CloudStack account and name of a security "
"group that has already been defined in that account. To allow traffic between "
"VMs within the security group you are editing now, enter its name."
msgstr ""

# b98f0fffba9942f6b1c8338e399cd238
#: ../../networking2.rst:1938
msgid "External Firewalls and Load Balancers"
msgstr ""

# 538d6ddab6754d2f95ed16d1c8c19a47
#: ../../networking2.rst:1940
msgid ""
"CloudStack is capable of replacing its Virtual Router with an external Juniper "
"SRX device and an optional external NetScaler or F5 load balancer for gateway "
"and load balancing services. In this case, the VMs use the SRX as their gateway."
msgstr ""

# 5b34eb6058a24e94801076fbb7ad2149
#: ../../networking2.rst:1946
msgid "About Using a NetScaler Load Balancer"
msgstr ""

# a78cf7cfee394628aaab85679c2ff14d
#: ../../networking2.rst:1948
msgid ""
"Citrix NetScaler is supported as an external network element for load balancing "
"in zones that use isolated networking in advanced zones. Set up an external load "
"balancer when you want to provide load balancing through means other than "
"CloudStack's provided virtual router."
msgstr ""

# b05631eea76f43049dad194f18a6a9b6
#: ../../networking2.rst:1954
msgid ""
"In a Basic zone, load balancing service is supported only if Elastic IP or "
"Elastic LB services are enabled."
msgstr ""

# 705041b2434b4ca483b18e0e974897dc
#: ../../networking2.rst:1956
msgid ""
"When NetScaler load balancer is used to provide EIP or ELB services in a Basic "
"zone, ensure that all guest VM traffic must enter and exit through the NetScaler "
"device. When inbound traffic goes through the NetScaler device, traffic is "
"routed by using the NAT protocol depending on the EIP/ELB configured on the "
"public IP to the private IP. The traffic that is originated from the guest VMs "
"usually goes through the layer 3 router. To ensure that outbound traffic goes "
"through NetScaler device providing EIP/ELB, layer 3 router must have a policy-"
"based routing. A policy-based route must be set up so that all traffic "
"originated from the guest VM's are directed to NetScaler device. This is "
"required to ensure that the outbound traffic from the guest VM's is routed to a "
"public IP by using NAT.For more information on Elastic IP, see `\"About Elastic "
"IP\" <#about-elastic-ip>`_."
msgstr ""

# 6bfdd4158ad14aa38deebe45fb9cbb9a
#: ../../networking2.rst:1970
msgid ""
"The NetScaler can be set up in direct (outside the firewall) mode. It must be "
"added before any load balancing rules are deployed on guest VMs in the zone."
msgstr ""

# d0b9fb7fee614995a8c6fa5905fff158
#: ../../networking2.rst:1974
msgid ""
"The functional behavior of the NetScaler with CloudStack is the same as "
"described in the CloudStack documentation for using an F5 external load "
"balancer. The only exception is that the F5 supports routing domains, and "
"NetScaler does not. NetScaler can not yet be used as a firewall."
msgstr ""

# 11e9cfee2a764a7fb0b70afb98d31c3b
#: ../../networking2.rst:1979
msgid ""
"To install and enable an external load balancer for CloudStack management, see "
"External Guest Load Balancer Integration in the Installation Guide."
msgstr ""

# 1fb1edcb2b6d4ffaa95d0fbe2737024a
#: ../../networking2.rst:1983
msgid ""
"The Citrix NetScaler comes in three varieties. The following table summarizes "
"how these variants are treated in CloudStack."
msgstr ""

# 12edf1030b1a46dea557408534fb87af
#: ../../networking2.rst:1986
msgid "NetScaler ADC Type"
msgstr ""

# 76d92f88c012490b8f745539f5beff17
#: ../../networking2.rst:1988
msgid "Description of Capabilities"
msgstr ""

# 85070d10ba6a46b6b7e646e0e6e68101
#: ../../networking2.rst:1990
msgid "CloudStack Supported Features"
msgstr ""

# 04cb1b68ff3b48edabc301bf64ccf560
#: ../../networking2.rst:1992
msgid "MPX"
msgstr "MPX"

# 2d07236e0fb24abc935fc25da378dc09
#: ../../networking2.rst:1994
msgid ""
"Physical appliance. Capable of deep packet inspection. Can act as application "
"firewall and load balancer"
msgstr ""

# ec6682993a804b9e9f80b1d00004182e
#: ../../networking2.rst:1997
msgid ""
"In advanced zones, load balancer functionality fully supported without "
"limitation. In basic zones, static NAT, elastic IP (EIP), and elastic load "
"balancing (ELB) are also provided."
msgstr ""

# b9ff4330d7774617b6ae9a5e7a8a6f1d
#: ../../networking2.rst:2001
msgid "VPX"
msgstr "VPX"

# 9005b76458ad41a483ee097a591c21db
#: ../../networking2.rst:2003
msgid ""
"Virtual appliance. Can run as VM on XenServer, ESXi, and Hyper-V hypervisors. "
"Same functionality as MPX"
msgstr ""

# 3685fe921180440098631978824bd41e
#: ../../networking2.rst:2006
msgid ""
"Supported on ESXi and XenServer. Same functional support as for MPX. CloudStack "
"will treat VPX and MPX as the same device type."
msgstr ""

# b4d1336da974407c9db6af169f5b24ff
#: ../../networking2.rst:2009
msgid "SDX"
msgstr "SDX"

# 62d3529ceb9a40a5a2112aff3c4ee083
#: ../../networking2.rst:2011
msgid ""
"Physical appliance. Can create multiple fully isolated VPX instances on a single "
"appliance to support multi-tenant usage"
msgstr ""

# 926617dc198f41458aa9112b482a4259
#: ../../networking2.rst:2014
msgid ""
"CloudStack will dynamically provision, configure, and manage the life cycle of "
"VPX instances on the SDX. Provisioned instances are added into CloudStack "
"automatically - no manual configuration by the administrator is required. Once a "
"VPX instance is added into CloudStack, it is treated the same as a VPX on an "
"ESXi host."
msgstr ""

# 05a9bff4e49b4e6faaeeecdcf5ef0c7e
#: ../../networking2.rst:2021
msgid "Configuring SNMP Community String on a RHEL Server"
msgstr ""

# 75f35b06310648d3a4b6bfddf33bc68e
#: ../../networking2.rst:2023
msgid ""
"The SNMP Community string is similar to a user id or password that provides "
"access to a network device, such as router. This string is sent along with all "
"SNMP requests. If the community string is correct, the device responds with the "
"requested information. If the community string is incorrect, the device discards "
"the request and does not respond."
msgstr ""

# 9c719f6ec799444b9ad1bf98205eabc8
#: ../../networking2.rst:2029
msgid ""
"The NetScaler device uses SNMP to communicate with the VMs. You must install "
"SNMP and configure SNMP Community string for a secure communication between the "
"NetScaler device and the RHEL machine."
msgstr ""

# bdc592b5c12d4fc9bbfb1cb4bf44b046
#: ../../networking2.rst:2035
msgid ""
"Ensure that you installed SNMP on RedHat. If not, run the following command:"
msgstr ""

# 02cf855a387949f3b83f4bb528cbf1c4
#: ../../networking2.rst:2044
msgid ""
"Edit the /etc/snmp/snmpd.conf file to allow the SNMP polling from the NetScaler "
"device."
msgstr ""

# 1decbe06fdbd45039c5b61ab7d3088d9
#: ../../networking2.rst:2049
msgid ""
"Map the community name into a security name (local and mynetwork, depending on "
"where the request is coming from):"
msgstr ""

# 8a17ab86a6dd4d5787e52b8e4414895f
#: ../../networking2.rst:2053
msgid "Use a strong password instead of public when you edit the following table."
msgstr ""

# 0179988cd69648e98566be83bd2dff14
#: ../../networking2.rst:2062
msgid "Setting to 0.0.0.0 allows all IPs to poll the NetScaler server."
msgstr ""

# 6577e90762254a09835bb6467df5a6ba
#: ../../networking2.rst:2066
msgid "Map the security names into group names:"
msgstr ""

# e25e9e1efba84febaa488370009ea353
#: ../../networking2.rst:2078
msgid "Create a view to allow the groups to have the permission to:"
msgstr ""

# 45d988cd96b04573b080085fbd6ee6cb
#: ../../networking2.rst:2086
msgid ""
"Grant access with different write permissions to the two groups to the view you "
"created."
msgstr ""

# 9fc121277fb04877af683ce49e88b40b
#: ../../networking2.rst:2097
msgid "Unblock SNMP in iptables."
msgstr "Débloquer SNMP dans iptables."

# ce86c5292fa840f194d550efe25863bf
#: ../../networking2.rst:2105
msgid "Start the SNMP service:"
msgstr "Démarrer le service SNMP :"

# c68c4cc6430e45fb8625e65486ad2c89
#: ../../networking2.rst:2113
msgid ""
"Ensure that the SNMP service is started automatically during the system startup:"
msgstr ""

# 9a86418eaea24d238f86754265515817
#: ../../networking2.rst:2121
msgid "Initial Setup of External Firewalls and Load Balancers"
msgstr ""

# 06a101bd0fb84bd0b26f130d1a867429
#: ../../networking2.rst:2123
msgid ""
"When the first VM is created for a new account, CloudStack programs the external "
"firewall and load balancer to work with the VM. The following objects are "
"created on the firewall:"
msgstr ""

# ab3bbc626f914afe9ac2a1b689262029
#: ../../networking2.rst:2129
msgid ""
"A new logical interface to connect to the account's private VLAN. The interface "
"IP is always the first IP of the account's private subnet (e.g. 10.1.1.1)."
msgstr ""

# f006b40c148b48a08def3072e5ad067c
#: ../../networking2.rst:2135
msgid ""
"A source NAT rule that forwards all outgoing traffic from the account's private "
"VLAN to the public Internet, using the account's public IP address as the source "
"address"
msgstr ""

# cd7a4e14c7984cd284aa60828cf93747
#: ../../networking2.rst:2141
msgid ""
"A firewall filter counter that measures the number of bytes of outgoing traffic "
"for the account"
msgstr ""

# 6863d2e715784256ae2aa22351962b89
#: ../../networking2.rst:2144
msgid "The following objects are created on the load balancer:"
msgstr ""

# 9f6423f23a65442d8e2bda3bb6db462b
#: ../../networking2.rst:2148
msgid "A new VLAN that matches the account's provisioned Zone VLAN"
msgstr ""

# 72187f0b05e848e6967cdb9a555381db
#: ../../networking2.rst:2152
msgid ""
"A self IP for the VLAN. This is always the second IP of the account's private "
"subnet (e.g. 10.1.1.2)."
msgstr ""

# ab8a654963914f2baa6cec082bc98b83
#: ../../networking2.rst:2156
msgid "Ongoing Configuration of External Firewalls and Load Balancers"
msgstr ""

# 6cc8786791794c06befa8a17509abd10
#: ../../networking2.rst:2158
msgid ""
"Additional user actions (e.g. setting a port forward) will cause further "
"programming of the firewall and load balancer. A user may request additional "
"public IP addresses and forward traffic received at these IPs to specific VMs. "
"This is accomplished by enabling static NAT for a public IP address, assigning "
"the IP to a VM, and specifying a set of protocols and port ranges to open. When "
"a static NAT rule is created, CloudStack programs the zone's external firewall "
"with the following objects:"
msgstr ""

# 1264629934524065bc84801e9205e4a5
#: ../../networking2.rst:2169
msgid ""
"A static NAT rule that maps the public IP address to the private IP address of a "
"VM."
msgstr ""
"Une règle de static NAT associe une adresse IP publique à l'adresse IP privée "
"d'une VM."

# c5fc12f27ace4872a52cb589ca35d678
#: ../../networking2.rst:2174
msgid ""
"A security policy that allows traffic within the set of protocols and port "
"ranges that are specified."
msgstr ""

# 3987c5c775d14d12b88cb87ad208f691
#: ../../networking2.rst:2179
msgid ""
"A firewall filter counter that measures the number of bytes of incoming traffic "
"to the public IP."
msgstr ""

# c5db6b14c530477fbdab470760ab4530
#: ../../networking2.rst:2182
msgid ""
"The number of incoming and outgoing bytes through source NAT, static NAT, and "
"load balancing rules is measured and saved on each external element. This data "
"is collected on a regular basis and stored in the CloudStack database."
msgstr ""

# ffe7e0e1d6a54f58847e94107290cdea
#: ../../networking2.rst:2188
msgid "Load Balancer Rules"
msgstr "Règles de répartition de charge"

# c4c2a4ed95bf4c308ca4f5e48b75081b
#: ../../networking2.rst:2190
msgid ""
"A CloudStack user or administrator may create load balancing rules that balance "
"traffic received at a public IP to one or more VMs. A user creates a rule, "
"specifies an algorithm, and assigns the rule to a set of VMs."
msgstr ""

# 5edeb5d8028f43088fd22e105d890c45
#: ../../networking2.rst:2196
msgid ""
"If you create load balancing rules while using a network service offering that "
"includes an external load balancer device such as NetScaler, and later change "
"the network service offering to one that uses the CloudStack virtual router, you "
"must create a firewall rule on the virtual router for each of your existing load "
"balancing rules so that they continue to function."
msgstr ""

# aee5ead118ba49d2af6fd663749cb21a
#: ../../networking2.rst:2206
msgid "Adding a Load Balancer Rule"
msgstr "Ajouter une règle de répartition de charge"

# ef9ec7e8608f4622a42b9006e67332f1
#: ../../networking2.rst:2218
msgid "Click the name of the network where you want to load balance the traffic."
msgstr ""

# d56ea994f5094995b0b1a4f7aa68eca8
# 7764a67f3ade40b1b3dc2075fac839f4
# ff64344bfa4d4a28a323dffd869d78cc
#: ../../networking2.rst:2227 ../../networking2.rst:6334 ../../networking2.rst:6728
msgid ""
"Click the IP address for which you want to create the rule, then click the "
"Configuration tab."
msgstr ""

# bd1517a9c2da449f8664512b691ebb65
# 563ad659bddb4945a34373de5161db96
#: ../../networking2.rst:2232 ../../networking2.rst:6339
msgid "In the Load Balancing node of the diagram, click View All."
msgstr ""

# 5c4e645be6564d2981406da6582c05fa
#: ../../networking2.rst:2234
msgid ""
"In a Basic zone, you can also create a load balancing rule without acquiring or "
"selecting an IP address. CloudStack internally assign an IP when you create the "
"load balancing rule, which is listed in the IP Addresses page when the rule is "
"created."
msgstr ""

# 19e72807452b47e3a1cc379d4795b3d9
#: ../../networking2.rst:2239
msgid ""
"To do that, select the name of the network, then click Add Load Balancer tab. "
"Continue with #7."
msgstr ""

# 92a8a5aa771d4722b5156213b1af4fd5
# 130044af73ab495bab3655cce16db603
#: ../../networking2.rst:2244 ../../networking2.rst:3732
msgid "Fill in the following:"
msgstr "Remplissez les champs suivants:"

# 96cfbfac34a546b2aabfdd57984816d9
# 2f3e7f66b6854ce1bf779bd548cb6f12
# 0e0ff88d07eb4baf9edfced6bfbc8d7b
#: ../../networking2.rst:2248 ../../networking2.rst:6351 ../../networking2.rst:6609
msgid "**Name**: A name for the load balancer rule."
msgstr ""

# d159c92df5a7480c9ea3390d74166c14
#: ../../networking2.rst:2252
msgid "**Public Port**: The port receiving incoming traffic to be balanced."
msgstr ""

# b581656e45d34c8d81bf85c2f5e1687d
# 4bc8d2ff0de548bfac5f09a67456130e
#: ../../networking2.rst:2257 ../../networking2.rst:6360
msgid "**Private Port**: The port that the VMs will use to receive the traffic."
msgstr ""

# 2543a97cf11048648e1d03e65b26ff8e
#: ../../networking2.rst:2262
msgid ""
"**Algorithm**: Choose the load balancing algorithm you want CloudStack to use. "
"CloudStack supports a variety of well-known algorithms. If you are not familiar "
"with these choices, you will find plenty of information about them on the "
"Internet."
msgstr ""

# 0e85be5a5f044e87a64418a1378234c5
#: ../../networking2.rst:2269
msgid ""
"**Stickiness**: (Optional) Click Configure and choose the algorithm for the "
"stickiness policy. See Sticky Session Policies for Load Balancer Rules."
msgstr ""

# d254fa1eae76499aa9dd3674a7ccb16e
#: ../../networking2.rst:2275
msgid ""
"**AutoScale**: Click Configure and complete the AutoScale configuration as "
"explained in :ref:`conf-autoscale`."
msgstr ""

# 80c293bf8b72415daff417f7d1e485c2
#: ../../networking2.rst:2280
msgid ""
"**Health Check**: (Optional; NetScaler load balancers only) Click Configure and "
"fill in the characteristics of the health check policy. See :ref:`health-check`."
msgstr ""

# 7646c6b438bc4f6a95b867bca86d2778
#: ../../networking2.rst:2286
msgid ""
"**Ping path (Optional)**: Sequence of destinations to which to send health check "
"queries. Default: / (all)."
msgstr ""

# f2e4bc38af6b4daf89f145d9739466f4
#: ../../networking2.rst:2291
msgid ""
"**Response time (Optional)**: How long to wait for a response from the health "
"check (2 - 60 seconds). Default: 5 seconds."
msgstr ""

# b56f106902c64b1c8aa0a36c64aec4ac
#: ../../networking2.rst:2296
msgid ""
"**Interval time (Optional)**: Amount of time between health checks (1 second - 5 "
"minutes). Default value is set in the global configuration parameter lbrule"
"\\_health check\\_time\\_interval."
msgstr ""

# 4295d940156f4b3ba091563f2533eb12
#: ../../networking2.rst:2303
msgid ""
"**Healthy threshold (Optional)**: Number of consecutive health check successes "
"that are required before declaring an instance healthy. Default: 2."
msgstr ""

# 7ac5054f47b24947b246698f28438d57
#: ../../networking2.rst:2309
msgid ""
"**Unhealthy threshold (Optional)**: Number of consecutive health check failures "
"that are required before declaring an instance unhealthy. Default: 10."
msgstr ""

# 7836878559f34b60b1399d767ae28a29
#: ../../networking2.rst:2315
msgid ""
"Click Add VMs, then select two or more VMs that will divide the load of incoming "
"traffic, and click Apply."
msgstr ""

# 6a2803e8da5f48318b4b61fd67bcd43f
#: ../../networking2.rst:2318
msgid ""
"The new load balancer rule appears in the list. You can repeat these steps to "
"add more load balancer rules for this IP address."
msgstr ""

# d24dcf4899a54968b3b3db61c818c67d
#: ../../networking2.rst:2322
msgid "Sticky Session Policies for Load Balancer Rules"
msgstr ""

# 8ab79ec71a4e4b98ad38ad17ec22af5f
#: ../../networking2.rst:2324
msgid ""
"Sticky sessions are used in Web-based applications to ensure continued "
"availability of information across the multiple requests in a user's session. "
"For example, if a shopper is filling a cart, you need to remember what has been "
"purchased so far. The concept of \"stickiness\" is also referred to as "
"persistence or maintaining state."
msgstr ""

# c3519ee8b4b344cabb8750b51ce2309d
#: ../../networking2.rst:2330
msgid ""
"Any load balancer rule defined in CloudStack can have a stickiness policy. The "
"policy consists of a name, stickiness method, and parameters. The parameters are "
"name-value pairs or flags, which are defined by the load balancer vendor. The "
"stickiness method could be load balancer-generated cookie, application-generated "
"cookie, or source-based. In the source-based method, the source IP address is "
"used to identify the user and locate the user's stored data. In the other "
"methods, cookies are used. The cookie generated by the load balancer or "
"application is included in request and response URLs to create persistence. The "
"cookie name can be specified by the administrator or automatically generated. A "
"variety of options are provided to control the exact behavior of cookies, such "
"as how they are generated and whether they are cached."
msgstr ""

# 79f3c606c002408f917d8fa2d8fdd9eb
#: ../../networking2.rst:2344
msgid ""
"For the most up to date list of available stickiness methods, see the CloudStack "
"UI or call listNetworks and check the SupportedStickinessMethods capability."
msgstr ""

# 3f62bdba5f31457aadd915d45be545a7
#: ../../networking2.rst:2351
msgid "Health Checks for Load Balancer Rules"
msgstr ""

# b083bc41aca34d9b98d86dc1d0206017
#: ../../networking2.rst:2353
msgid "(NetScaler load balancer only; requires NetScaler version 10.0)"
msgstr ""

# 1bf841d08f9947a9a22824b89f8e09d4
#: ../../networking2.rst:2355
msgid ""
"Health checks are used in load-balanced applications to ensure that requests are "
"forwarded only to running, available services. When creating a load balancer "
"rule, you can specify a health check policy. This is in addition to specifying "
"the stickiness policy, algorithm, and other load balancer rule options. You can "
"configure one health check policy per load balancer rule."
msgstr ""

# 85c9feea4e8743198f31cc482695a279
#: ../../networking2.rst:2362
msgid ""
"Any load balancer rule defined on a NetScaler load balancer in CloudStack can "
"have a health check policy. The policy consists of a ping path, thresholds to "
"define \"healthy\" and \"unhealthy\" states, health check frequency, and timeout "
"wait interval."
msgstr ""

# 352dde5daf9c433c88293769a6bb0553
#: ../../networking2.rst:2367
msgid ""
"When a health check policy is in effect, the load balancer will stop forwarding "
"requests to any resources that are found to be unhealthy. If the resource later "
"becomes available again, the periodic health check will discover it, and the "
"resource will once again be added to the pool of resources that can receive "
"requests from the load balancer. At any given time, the most recent result of "
"the health check is displayed in the UI. For any VM that is attached to a load "
"balancer rule with a health check configured, the state will be shown as UP or "
"DOWN in the UI depending on the result of the most recent health check."
msgstr ""

# 7487d03bd3954a619c9deab8432eccb5
#: ../../networking2.rst:2377
msgid "You can delete or modify existing health check policies."
msgstr ""

# 9bb908ef254545669272a47771402d19
#: ../../networking2.rst:2379
msgid ""
"To configure how often the health check is performed by default, use the global "
"configuration setting healthcheck.update.interval (default value is 600 "
"seconds). You can override this value for an individual health check policy."
msgstr ""

# a4a4e4ced2f64992a7090ec99eec5b74
#: ../../networking2.rst:2384
msgid ""
"For details on how to set a health check policy using the UI, see :ref:`adding-"
"lb-rule`."
msgstr ""

# 7583c6f2d7c04c729c049fe5fb20f1d0
#: ../../networking2.rst:2390
msgid "Configuring AutoScale"
msgstr ""

# 110dc69ca3524adf841208bc3b2afa45
#: ../../networking2.rst:2392
msgid ""
"AutoScaling allows you to scale your back-end services or application VMs up or "
"down seamlessly and automatically according to the conditions you define. With "
"AutoScaling enabled, you can ensure that the number of VMs you are using "
"seamlessly scale up when demand increases, and automatically decreases when "
"demand subsides. Thus it helps you save compute costs by terminating underused "
"VMs automatically and launching new VMs when you need them, without the need for "
"manual intervention."
msgstr ""

# 6067162c83174a73b67766fe147a1105
#: ../../networking2.rst:2400
msgid ""
"NetScaler AutoScaling is designed to seamlessly launch or terminate VMs based on "
"user-defined conditions. Conditions for triggering a scaleup or scaledown action "
"can vary from a simple use case like monitoring the CPU usage of a server to a "
"complex use case of monitoring a combination of server's responsiveness and its "
"CPU usage. For example, you can configure AutoScaling to launch an additional VM "
"whenever CPU usage exceeds 80 percent for 15 minutes, or to remove a VM whenever "
"CPU usage is less than 20 percent for 30 minutes."
msgstr ""

# 4178b892ea11419ca207b4f23416d240
#: ../../networking2.rst:2409
msgid ""
"CloudStack uses the NetScaler load balancer to monitor all aspects of a system's "
"health and work in unison with CloudStack to initiate scale-up or scale-down "
"actions."
msgstr ""

# 720fc42dfba2445580316d8a7c7b6446
#: ../../networking2.rst:2413
msgid "AutoScale is supported on NetScaler Release 10 Build 74.4006.e and beyond."
msgstr ""

# 25d5a916dcd24f8c93a8a2270ea1dec8
#: ../../networking2.rst:2418
msgid "Before you configure an AutoScale rule, consider the following:"
msgstr ""

# e5e20ba2d3ec4d3492856bcfe74d40f1
#: ../../networking2.rst:2422
msgid ""
"Ensure that the necessary template is prepared before configuring AutoScale. "
"When a VM is deployed by using a template and when it comes up, the application "
"should be up and running."
msgstr ""

# a3786b1dded84da299934e36c6d9e71a
#: ../../networking2.rst:2427
msgid ""
"If the application is not running, the NetScaler device considers the VM as "
"ineffective and continues provisioning the VMs unconditionally until the "
"resource limit is exhausted."
msgstr ""

# 848edeadae8842dd9b6660533e51cb84
#: ../../networking2.rst:2433
msgid ""
"Deploy the templates you prepared. Ensure that the applications come up on the "
"first boot and is ready to take the traffic. Observe the time requires to deploy "
"the template. Consider this time when you specify the quiet time while "
"configuring AutoScale."
msgstr ""

# 47a8c8b854724128bca574cad390341b
#: ../../networking2.rst:2440
msgid ""
"The AutoScale feature supports the SNMP counters that can be used to define "
"conditions for taking scale up or scale down actions. To monitor the SNMP-based "
"counter, ensure that the SNMP agent is installed in the template used for "
"creating the AutoScale VMs, and the SNMP operations work with the configured "
"SNMP community and port by using standard SNMP managers. For example, see `"
"\"Configuring SNMP Community String on a RHEL Server\" <#configuring-snmp-"
"community-string-on-a-rhel-server>`_ to configure SNMP on a RHEL machine."
msgstr ""

# c4bb8c60d3214089b1726fe9bea68db1
#: ../../networking2.rst:2451
msgid ""
"Ensure that the endpointe.url parameter present in the Global Settings is set to "
"the Management Server API URL. For example, ``http://10.102.102.22:8080/client/"
"api``. In a multi-node Management Server deployment, use the virtual IP address "
"configured in the load balancer for the management server's cluster. "
"Additionally, ensure that the NetScaler device has access to this IP address to "
"provide AutoScale support."
msgstr ""

# f6027494d923450aa21e243d185af107
#: ../../networking2.rst:2459
msgid ""
"If you update the endpointe.url, disable the AutoScale functionality of the load "
"balancer rules in the system, then enable them back to reflect the changes. For "
"more information see :ref:`update-autoscale`."
msgstr ""

# 30b6a0dcaf8e406d930c2671bee73f49
#: ../../networking2.rst:2465
msgid ""
"If the API Key and Secret Key are regenerated for an AutoScale user, ensure that "
"the AutoScale functionality of the load balancers that the user participates in "
"are disabled and then enabled to reflect the configuration changes in the "
"NetScaler."
msgstr ""

# 8e11275ad7bc4f9bbae8488f9270ddb9
#: ../../networking2.rst:2472
msgid ""
"In an advanced Zone, ensure that at least one VM should be present before "
"configuring a load balancer rule with AutoScale. Having one VM in the network "
"ensures that the network is in implemented state for configuring AutoScale."
msgstr ""

# 2f62ff61696a4b28b1fe7a6e9ed379af
#: ../../networking2.rst:2478
msgid "Configuration"
msgstr "Configuration"

# 6ecf74a9baef420b8f4cf0f4a633ee47
#: ../../networking2.rst:2482
msgid "|autoscaleateconfig.png|"
msgstr "|autoscaleateconfig.png|"

# f28a8f2eaa864c579595a69d9339a432
#: ../../networking2.rst:2486
msgid ""
"**Template**: A template consists of a base OS image and application. A template "
"is used to provision the new instance of an application on a scaleup action. "
"When a VM is deployed from a template, the VM can start taking the traffic from "
"the load balancer without any admin intervention. For example, if the VM is "
"deployed for a Web service, it should have the Web server running, the database "
"connected, and so on."
msgstr ""

# ab74533b03a84bf99ebf74e5eb9a1f2d
#: ../../networking2.rst:2496
msgid ""
"**Compute offering**: A predefined set of virtual hardware attributes, including "
"CPU speed, number of CPUs, and RAM size, that the user can select when creating "
"a new virtual machine instance. Choose one of the compute offerings to be used "
"while provisioning a VM instance as part of scaleup action."
msgstr ""

# e0ca6e4baff64455862f60837590f305
#: ../../networking2.rst:2504
msgid ""
"**Min Instance**: The minimum number of active VM instances that is assigned to "
"a load balancing rule. The active VM instances are the application instances "
"that are up and serving the traffic, and are being load balanced. This parameter "
"ensures that a load balancing rule has at least the configured number of active "
"VM instances are available to serve the traffic."
msgstr ""

# 985d35506cb34451b0d15a405feae1a7
#: ../../networking2.rst:2512
msgid ""
"If an application, such as SAP, running on a VM instance is down for some "
"reason, the VM is then not counted as part of Min Instance parameter, and the "
"AutoScale feature initiates a scaleup action if the number of active VM "
"instances is below the configured value. Similarly, when an application instance "
"comes up from its earlier down state, this application instance is counted as "
"part of the active instance count and the AutoScale process initiates a "
"scaledown action when the active instance count breaches the Max instance value."
msgstr ""

# fb0ddc4d1f94403ebeed8e5714b4f617
#: ../../networking2.rst:2524
msgid ""
"**Max Instance**: Maximum number of active VM instances that **should be "
"assigned to**\\ a load balancing rule. This parameter defines the upper limit of "
"active VM instances that can be assigned to a load balancing rule."
msgstr ""

# 783c86a84d0f4c1b833db963b51c82af
#: ../../networking2.rst:2529
msgid ""
"Specifying a large value for the maximum instance parameter might result in "
"provisioning large number of VM instances, which in turn leads to a single load "
"balancing rule exhausting the VM instances limit specified at the account or "
"domain level."
msgstr ""

# 1a3b1e1b09e04f57993e13c4afcb55e0
#: ../../networking2.rst:2535
msgid ""
"If an application, such as SAP, running on a VM instance is down for some "
"reason, the VM is not counted as part of Max Instance parameter. So there may be "
"scenarios where the number of VMs provisioned for a scaleup action might be more "
"than the configured Max Instance value. Once the application instances in the "
"VMs are up from an earlier down state, the AutoScale feature starts aligning to "
"the configured Max Instance value."
msgstr ""

# 6a70933964e74afe83fe5d290058b273
#: ../../networking2.rst:2543
msgid "Specify the following scale-up and scale-down policies:"
msgstr ""

# cf10d74a5d0c41e589755735a7cedc27
#: ../../networking2.rst:2547
msgid ""
"**Duration**: The duration, in seconds, for which the conditions you specify "
"must be true to trigger a scaleup action. The conditions defined should hold "
"true for the entire duration you specify for an AutoScale action to be invoked."
msgstr ""

# a57ca091c3bd43c096bfa98631b1cdde
#: ../../networking2.rst:2554
msgid ""
"**Counter**: The performance counters expose the state of the monitored "
"instances. By default, CloudStack offers four performance counters: Three SNMP "
"counters and one NetScaler counter. The SNMP counters are Linux User CPU, Linux "
"System CPU, and Linux CPU Idle. The NetScaler counter is ResponseTime. The root "
"administrator can add additional counters into CloudStack by using the "
"CloudStack API."
msgstr ""

# a0b4564310ab4971b3f47a61f665d061
#: ../../networking2.rst:2563
msgid ""
"**Operator**: The following five relational operators are supported in AutoScale "
"feature: Greater than, Less than, Less than or equal to, Greater than or equal "
"to, and Equal to."
msgstr ""

# e0ce29c287f846fab5b519e88ea090ee
#: ../../networking2.rst:2569
msgid ""
"**Threshold**: Threshold value to be used for the counter. Once the counter "
"defined above breaches the threshold value, the AutoScale feature initiates a "
"scaleup or scaledown action."
msgstr ""

# 6561f9d06cfe4f6d9874575da794592a
#: ../../networking2.rst:2575
msgid "**Add**: Click Add to add the condition."
msgstr ""

# 1497e6bea4e1463b844a038331cb983f
#: ../../networking2.rst:2577
msgid ""
"Additionally, if you want to configure the advanced settings, click Show "
"advanced settings, and specify the following:"
msgstr ""

# eb929ac5f36d4e0685a50c5cc16f0df5
#: ../../networking2.rst:2582
msgid ""
"**Polling interval**: Frequency in which the conditions, combination of counter, "
"operator and threshold, are to be evaluated before taking a scale up or down "
"action. The default polling interval is 30 seconds."
msgstr ""

# 8d0aedaf4e0f45a6beda1b9421388942
#: ../../networking2.rst:2589
msgid ""
"**Quiet Time**: This is the cool down period after an AutoScale action is "
"initiated. The time includes the time taken to complete provisioning a VM "
"instance from its template and the time taken by an application to be ready to "
"serve traffic. This quiet time allows the fleet to come up to a stable state "
"before any action can take place. The default is 300 seconds."
msgstr ""

# fdefaeca99e24f218e68b41bfe85e3ce
#: ../../networking2.rst:2598
msgid ""
"**Destroy VM Grace Period**: The duration in seconds, after a scaledown action "
"is initiated, to wait before the VM is destroyed as part of scaledown action. "
"This is to ensure graceful close of any pending sessions or transactions being "
"served by the VM marked for destroy. The default is 120 seconds."
msgstr ""

# cf6ffe6f0c4c4e1a868a853debfcdbbf
#: ../../networking2.rst:2606
msgid ""
"**Security Groups**: Security groups provide a way to isolate traffic to the VM "
"instances. A security group is a group of VMs that filter their incoming and "
"outgoing traffic according to a set of rules, called ingress and egress rules. "
"These rules filter network traffic according to the IP address that is "
"attempting to communicate with the VM."
msgstr ""

# c4bd403a66d64d868f4d5b0442abb5f7
#: ../../networking2.rst:2615
msgid "**Disk Offerings**: A predefined set of disk size for primary data storage."
msgstr ""

# 8976b1a845f84354ab47314b3cc692d7
#: ../../networking2.rst:2620
msgid ""
"**SNMP Community**: The SNMP community string to be used by the NetScaler device "
"to query the configured counter value from the provisioned VM instances. Default "
"is public."
msgstr ""

# cca89ffa679d47ad992fe021145932eb
#: ../../networking2.rst:2626
msgid ""
"**SNMP Port**: The port number on which the SNMP agent that run on the "
"provisioned VMs is listening. Default port is 161."
msgstr ""

# e00f8d3ec41440b5b002e2041a08220f
#: ../../networking2.rst:2631
msgid ""
"**User**: This is the user that the NetScaler device use to invoke scaleup and "
"scaledown API calls to the cloud. If no option is specified, the user who "
"configures AutoScaling is applied. Specify another user name to override."
msgstr ""

# 9b84f1bc76c44c38a35321973e56210c
#: ../../networking2.rst:2638
msgid "**Apply**: Click Apply to create the AutoScale configuration."
msgstr ""

# b547fd51c7ac43f6896f5326d0bc8ba8
#: ../../networking2.rst:2641
msgid "Disabling and Enabling an AutoScale Configuration"
msgstr ""

# 38e5928d47d14bc19e1fab9539b611a0
#: ../../networking2.rst:2643
msgid ""
"If you want to perform any maintenance operation on the AutoScale VM instances, "
"disable the AutoScale configuration. When the AutoScale configuration is "
"disabled, no scaleup or scaledown action is performed. You can use this downtime "
"for the maintenance activities. To disable the AutoScale configuration, click "
"the Disable AutoScale |EnableDisable.png| button."
msgstr ""

# 9e667521e0ed422c97c64cd3cd3a8b27
#: ../../networking2.rst:2649
msgid ""
"The button toggles between enable and disable, depending on whether AutoScale is "
"currently enabled or not. After the maintenance operations are done, you can "
"enable the AutoScale configuration back. To enable, open the AutoScale "
"configuration page again, then click the Enable AutoScale |EnableDisable.png| "
"button."
msgstr ""

# 8c265f29a2494792991abbb3daed1b9e
#: ../../networking2.rst:2658
msgid "Updating an AutoScale Configuration"
msgstr ""

# 280deb0a83064852b5f2ddd3b80809a6
#: ../../networking2.rst:2660
msgid ""
"You can update the various parameters and add or delete the conditions in a "
"scaleup or scaledown rule. Before you update an AutoScale configuration, ensure "
"that you disable the AutoScale load balancer rule by clicking the Disable "
"AutoScale button."
msgstr ""

# e7070f9e778042a7aa68aeb88bde2257
#: ../../networking2.rst:2665
msgid ""
"After you modify the required AutoScale parameters, click Apply. To apply the "
"new AutoScale policies, open the AutoScale configuration page again, then click "
"the Enable AutoScale button."
msgstr ""

# e92451dccecb4a40a0c35bcc6e42105a
#: ../../networking2.rst:2670
msgid "Runtime Considerations"
msgstr ""

# 5a7ed98221fc42848a83b71bcc5439f8
#: ../../networking2.rst:2674
msgid ""
"An administrator should not assign a VM to a load balancing rule which is "
"configured for AutoScale."
msgstr ""

# 3afe9927a67b460a9e6faea30ba427fb
#: ../../networking2.rst:2679
msgid ""
"Before a VM provisioning is completed if NetScaler is shutdown or restarted, the "
"provisioned VM cannot be a part of the load balancing rule though the intent was "
"to assign it to a load balancing rule. To workaround, rename the AutoScale "
"provisioned VMs based on the rule name or ID so at any point of time the VMs can "
"be reconciled to its load balancing rule."
msgstr ""

# eee56e4a2e474a04988980cace231253
#: ../../networking2.rst:2688
msgid ""
"Making API calls outside the context of AutoScale, such as destroyVM, on an "
"autoscaled VM leaves the load balancing configuration in an inconsistent state. "
"Though VM is destroyed from the load balancer rule, NetScaler continues to show "
"the VM as a service assigned to a rule."
msgstr ""

# 6da746ba5a56414f91ec2e2db3f82484
#: ../../networking2.rst:2695
msgid "Global Server Load Balancing Support"
msgstr ""

# 81e233e5a8774fe7912bb9d777b02098
#: ../../networking2.rst:2697
msgid ""
"CloudStack supports Global Server Load Balancing (GSLB) functionalities to "
"provide business continuity, and enable seamless resource movement within a "
"CloudStack environment. CloudStack achieve this by extending its functionality "
"of integrating with NetScaler Application Delivery Controller (ADC), which also "
"provides various GSLB capabilities, such as disaster recovery and load "
"balancing. The DNS redirection technique is used to achieve GSLB in CloudStack."
msgstr ""

# 182ac54151764429a54597e47be09455
#: ../../networking2.rst:2705
msgid ""
"In order to support this functionality, region level services and service "
"provider are introduced. A new service 'GSLB' is introduced as a region level "
"service. The GSLB service provider is introduced that will provider the GSLB "
"service. Currently, NetScaler is the supported GSLB provider in CloudStack. GSLB "
"functionality works in an Active-Active data center environment."
msgstr ""

# 8250959d1c994c618634ca275a2acf89
#: ../../networking2.rst:2713
msgid "About Global Server Load Balancing"
msgstr ""

# 23d6ad0ee7e345bd8b6e5a4ff72f0bde
#: ../../networking2.rst:2715
msgid ""
"Global Server Load Balancing (GSLB) is an extension of load balancing "
"functionality, which is highly efficient in avoiding downtime. Based on the "
"nature of deployment, GSLB represents a set of technologies that is used for "
"various purposes, such as load sharing, disaster recovery, performance, and "
"legal obligations. With GSLB, workloads can be distributed across multiple data "
"centers situated at geographically separated locations. GSLB can also provide an "
"alternate location for accessing a resource in the event of a failure, or to "
"provide a means of shifting traffic easily to simplify maintenance, or both."
msgstr ""

# 9df73711bf05422aa3ff011e97b010d0
#: ../../networking2.rst:2726
msgid "Components of GSLB"
msgstr ""

# 0dbce0ca6baa46aeaad670109fbc187b
#: ../../networking2.rst:2728
msgid "A typical GSLB environment is comprised of the following components:"
msgstr ""

# be687e83d654431899ed881ba56746a0
#: ../../networking2.rst:2732
msgid ""
"**GSLB Site**: In CloudStack terminology, GSLB sites are represented by zones "
"that are mapped to data centers, each of which has various network appliances. "
"Each GSLB site is managed by a NetScaler appliance that is local to that site. "
"Each of these appliances treats its own site as the local site and all other "
"sites, managed by other appliances, as remote sites. It is the central entity in "
"a GSLB deployment, and is represented by a name and an IP address."
msgstr ""

# 1a724093f2854945a12f90a9aac0cdf7
#: ../../networking2.rst:2742
msgid ""
"**GSLB Services**: A GSLB service is typically represented by a load balancing "
"or content switching virtual server. In a GSLB environment, you can have a local "
"as well as remote GSLB services. A local GSLB service represents a local load "
"balancing or content switching virtual server. A remote GSLB service is the one "
"configured at one of the other sites in the GSLB setup. At each site in the GSLB "
"setup, you can create one local GSLB service and any number of remote GSLB "
"services."
msgstr ""

# 5fa2919887bc460f94bbe24c89b9d442
#: ../../networking2.rst:2753
msgid ""
"**GSLB Virtual Servers**: A GSLB virtual server refers to one or more GSLB "
"services and balances traffic between traffic across the VMs in multiple zones "
"by using the CloudStack functionality. It evaluates the configured GSLB methods "
"or algorithms to select a GSLB service to which to send the client requests. One "
"or more virtual servers from different zones are bound to the GSLB virtual "
"server. GSLB virtual server does not have a public IP associated with it, "
"instead it will have a FQDN DNS name."
msgstr ""

# 20cb61cdbd444e9a9f11f683a1ee4b35
#: ../../networking2.rst:2764
msgid ""
"**Load Balancing or Content Switching Virtual Servers**: According to Citrix "
"NetScaler terminology, a load balancing or content switching virtual server "
"represents one or many servers on the local network. Clients send their requests "
"to the load balancing or content switching virtual server's virtual IP (VIP) "
"address, and the virtual server balances the load across the local servers. "
"After a GSLB virtual server selects a GSLB service representing either a local "
"or a remote load balancing or content switching virtual server, the client sends "
"the request to that virtual server's VIP address."
msgstr ""

# a5ecee28e9bb433a8951bf3350e6aa91
#: ../../networking2.rst:2776
msgid ""
"**DNS VIPs**: DNS virtual IP represents a load balancing DNS virtual server on "
"the GSLB service provider. The DNS requests for domains for which the GSLB "
"service provider is authoritative can be sent to a DNS VIP."
msgstr ""

# 4eb2a120e2de43caad10fb89f83d8158
#: ../../networking2.rst:2783
msgid ""
"**Authoritative DNS**: ADNS (Authoritative Domain Name Server) is a service that "
"provides actual answer to DNS queries, such as web site IP address. In a GSLB "
"environment, an ADNS service responds only to DNS requests for domains for which "
"the GSLB service provider is authoritative. When an ADNS service is configured, "
"the service provider owns that IP address and advertises it. When you create an "
"ADNS service, the NetScaler responds to DNS queries on the configured ADNS "
"service IP and port."
msgstr ""

# cd935874099944bd8bd07f110b11f0c3
#: ../../networking2.rst:2793
msgid "How Does GSLB Works in CloudStack?"
msgstr ""

# a07db76162554695b05812b43a222375
#: ../../networking2.rst:2795
msgid ""
"Global server load balancing is used to manage the traffic flow to a web site "
"hosted on two separate zones that ideally are in different geographic locations. "
"The following is an illustration of how GLSB functionality is provided in "
"CloudStack: An organization, xyztelco, has set up a public cloud that spans two "
"zones, Zone-1 and Zone-2, across geographically separated data centers that are "
"managed by CloudStack. Tenant-A of the cloud launches a highly available "
"solution by using xyztelco cloud. For that purpose, they launch two instances "
"each in both the zones: VM1 and VM2 in Zone-1 and VM5 and VM6 in Zone-2. Tenant-"
"A acquires a public IP, IP-1 in Zone-1, and configures a load balancer rule to "
"load balance the traffic between VM1 and VM2 instances. CloudStack orchestrates "
"setting up a virtual server on the LB service provider in Zone-1. Virtual server "
"1 that is set up on the LB service provider in Zone-1 represents a publicly "
"accessible virtual server that client reaches at IP-1. The client traffic to "
"virtual server 1 at IP-1 will be load balanced across VM1 and VM2 instances."
msgstr ""

# 7522dda4534f412e9114fbef583cdbc4
#: ../../networking2.rst:2812
msgid ""
"Tenant-A acquires another public IP, IP-2 in Zone-2 and sets up a load balancer "
"rule to load balance the traffic between VM5 and VM6 instances. Similarly in "
"Zone-2, CloudStack orchestrates setting up a virtual server on the LB service "
"provider. Virtual server 2 that is setup on the LB service provider in Zone-2 "
"represents a publicly accessible virtual server that client reaches at IP-2. The "
"client traffic that reaches virtual server 2 at IP-2 is load balanced across VM5 "
"and VM6 instances. At this point Tenant-A has the service enabled in both the "
"zones, but has no means to set up a disaster recovery plan if one of the zone "
"fails. Additionally, there is no way for Tenant-A to load balance the traffic "
"intelligently to one of the zones based on load, proximity and so on. The cloud "
"administrator of xyztelco provisions a GSLB service provider to both the zones. "
"A GSLB provider is typically an ADC that has the ability to act as an ADNS "
"(Authoritative Domain Name Server) and has the mechanism to monitor health of "
"virtual servers both at local and remote sites. The cloud admin enables GSLB as "
"a service to the tenants that use zones 1 and 2."
msgstr ""

# 89319188219b404eb12377733494db5a
#: ../../networking2.rst:2830
msgid "|gslb.png|"
msgstr "|gslb.png|"

# b984591edede4102820e3e91af964094
#: ../../networking2.rst:2832
msgid ""
"Tenant-A wishes to leverage the GSLB service provided by the xyztelco cloud. "
"Tenant-A configures a GSLB rule to load balance traffic across virtual server 1 "
"at Zone-1 and virtual server 2 at Zone-2. The domain name is provided as A."
"xyztelco.com. CloudStack orchestrates setting up GSLB virtual server 1 on the "
"GSLB service provider at Zone-1. CloudStack binds virtual server 1 of Zone-1 and "
"virtual server 2 of Zone-2 to GLSB virtual server 1. GSLB virtual server 1 is "
"configured to start monitoring the health of virtual server 1 and 2 in Zone-1. "
"CloudStack will also orchestrate setting up GSLB virtual server 2 on GSLB "
"service provider at Zone-2. CloudStack will bind virtual server 1 of Zone-1 and "
"virtual server 2 of Zone-2 to GLSB virtual server 2. GSLB virtual server 2 is "
"configured to start monitoring the health of virtual server 1 and 2. CloudStack "
"will bind the domain A.xyztelco.com to both the GSLB virtual server 1 and 2. At "
"this point, Tenant-A service will be globally reachable at A.xyztelco.com. The "
"private DNS server for the domain xyztelcom.com is configured by the admin out-"
"of-band to resolve the domain A.xyztelco.com to the GSLB providers at both the "
"zones, which are configured as ADNS for the domain A.xyztelco.com. A client when "
"sends a DNS request to resolve A.xyztelcom.com, will eventually get DNS "
"delegation to the address of GSLB providers at zone 1 and 2. A client DNS "
"request will be received by the GSLB provider. The GSLB provider, depending on "
"the domain for which it needs to resolve, will pick up the GSLB virtual server "
"associated with the domain. Depending on the health of the virtual servers being "
"load balanced, DNS request for the domain will be resolved to the public IP "
"associated with the selected virtual server."
msgstr ""

# 8456ab01fb394c3383eeb5029e812dc5
#: ../../networking2.rst:2860
msgid "Configuring GSLB"
msgstr ""

# a2ddfa5eb5c04d4b8969f09f92f69456
#: ../../networking2.rst:2862
msgid ""
"To configure a GSLB deployment, you must first configure a standard load "
"balancing setup for each zone. This enables you to balance load across the "
"different servers in each zone in the region. Then on the NetScaler side, "
"configure both NetScaler appliances that you plan to add to each zone as "
"authoritative DNS (ADNS) servers. Next, create a GSLB site for each zone, "
"configure GSLB virtual servers for each site, create GLSB services, and bind the "
"GSLB services to the GSLB virtual servers. Finally, bind the domain to the GSLB "
"virtual servers. The GSLB configurations on the two appliances at the two "
"different zones are identical, although each sites load-balancing configuration "
"is specific to that site."
msgstr ""

# 6d13a7e3c72d4d0fbbf094a3a0048b5e
#: ../../networking2.rst:2874
msgid ""
"Perform the following as a cloud administrator. As per the example given above, "
"the administrator of xyztelco is the one who sets up GSLB:"
msgstr ""

# 1b13dfc3a4704d5a8fa68973611763ec
#: ../../networking2.rst:2879
msgid ""
"In the cloud.dns.name global parameter, specify the DNS name of your tenant's "
"cloud that make use of the GSLB service."
msgstr ""

# 24fa8e0bc85a4858bb09168558689b88
#: ../../networking2.rst:2884
msgid ""
"On the NetScaler side, configure GSLB as given in `Configuring Global Server "
"Load Balancing (GSLB) <http://support.citrix.com/proddocs/topic/netscaler-"
"traffic-management-10-map/ns-gslb-config-con.html>`_:"
msgstr ""

# 4527dca57f1440febc672d19e072283e
#: ../../networking2.rst:2890
msgid "Configuring a standard load balancing setup."
msgstr ""

# 0c91751454f842ed867ba1142e0082af
#: ../../networking2.rst:2894
msgid ""
"Configure Authoritative DNS, as explained in `Configuring an Authoritative DNS "
"Service <http://support.citrix.com/proddocs/topic/netscaler-traffic-"
"management-10-map/ns-gslb-config-adns-svc-tsk.html>`_."
msgstr ""

# 81d14d2da5084c1491a9261135038ca2
#: ../../networking2.rst:2900
msgid "Configure a GSLB site with site name formed from the domain name details."
msgstr ""

# b8bd9fe16daa4ddab41339b4016d8128
#: ../../networking2.rst:2903
msgid "Configure a GSLB site with the site name formed from the domain name."
msgstr ""

# ec8346bdb6fb4e9b85623f3b7fedc33b
#: ../../networking2.rst:2906
msgid ""
"As per the example given above, the site names are A.xyztelco.com and B.xyztelco."
"com."
msgstr ""

# 7e764b73be594f529ea85676104ba0d9
#: ../../networking2.rst:2909
msgid ""
"For more information, see `Configuring a Basic GSLB Site <http://support.citrix."
"com/proddocs/topic/netscaler-traffic-management-10-map/ns-gslb-config-basic-site-"
"tsk.html>`_."
msgstr ""

# e8b2b78d2bcc4ead899d033a82688d6a
#: ../../networking2.rst:2914
msgid "Configure a GSLB virtual server."
msgstr ""

# a658718fb49e4176814d60e01d81a6c3
#: ../../networking2.rst:2916
msgid ""
"For more information, see `Configuring a GSLB Virtual Server <http://support."
"citrix.com/proddocs/topic/netscaler-traffic-management-10-map/ns-gslb-config-"
"vsvr-tsk.html>`_."
msgstr ""

# 5bc91629e58046eabfa170a8ff9228cd
#: ../../networking2.rst:2921
msgid "Configure a GSLB service for each virtual server."
msgstr ""

# ad990e26ce2c411081c88e66a273cb2c
#: ../../networking2.rst:2923
msgid ""
"For more information, see `Configuring a GSLB Service <http://support.citrix.com/"
"proddocs/topic/netscaler-traffic-management-10-map/ns-gslb-config-svc-tsk."
"html>`_."
msgstr ""

# c239f4ef8dcf4da58541d9bb39333eb2
#: ../../networking2.rst:2928
msgid "Bind the GSLB services to the GSLB virtual server."
msgstr ""

# 1e702a12b98043e2bacf01a137ee482e
#: ../../networking2.rst:2930
msgid ""
"For more information, see `Binding GSLB Services to a GSLB Virtual Server "
"<http://support.citrix.com/proddocs/topic/netscaler-traffic-management-10-map/ns-"
"gslb-bind-svc-vsvr-tsk.html>`_."
msgstr ""

# 10e534b7d92e4b40ad06805f6092f802
#: ../../networking2.rst:2935
msgid ""
"Bind domain name to GSLB virtual server. Domain name is obtained from the domain "
"details."
msgstr ""

# 604d20e5aff64a2e9c6634fcbc5268e5
#: ../../networking2.rst:2938
msgid ""
"For more information, see `Binding a Domain to a GSLB Virtual Server <http://"
"support.citrix.com/proddocs/topic/netscaler-traffic-management-10-map/ns-gslb-"
"bind-dom-vsvr-tsk.html>`_."
msgstr ""

# 0ac7add23ac4439ca08fc7caba76441e
#: ../../networking2.rst:2943
msgid ""
"In each zone that are participating in GSLB, add GSLB-enabled NetScaler device."
msgstr ""

# 5d9a5dd2235f42579a6118838bb636fa
#: ../../networking2.rst:2946
msgid "For more information, see :ref:`enabling-gslb-in-ns`."
msgstr ""

# ff5093bc021b4c379b8656f628935267
#: ../../networking2.rst:2948
msgid "As a domain administrator/ user perform the following:"
msgstr ""

# 1ef3c0fd004d43e69534e4a5de7f38d8
#: ../../networking2.rst:2952
msgid "Add a GSLB rule on both the sites."
msgstr ""

# 5779d01501a3442eadc72060d6a298e3
#: ../../networking2.rst:2954
msgid "See \":ref:`adding-gslb-rule`\"."
msgstr ""

# cbd719c880074f4d8e40125c6a766be2
#: ../../networking2.rst:2958
msgid "Assign load balancer rules."
msgstr ""

# c9a1fb87306b486dad29aa18bd3d8819
#: ../../networking2.rst:2960
msgid "See \":ref:`assigning-lb-rule-gslb`\"."
msgstr ""

# a1b0865343b54113bc0065aa808ec8cb
#: ../../networking2.rst:2967
msgid "The GSLB functionality is supported both Basic and Advanced zones."
msgstr ""

# da30d8fa37d94effb410d14171ff906b
#: ../../networking2.rst:2971
msgid "GSLB is added as a new network service."
msgstr ""

# 13eb68d1468e4d7c99753052f9b72a15
#: ../../networking2.rst:2975
msgid "GSLB service provider can be added to a physical network in a zone."
msgstr ""

# 6384b810c9a4410c9ae8f67816e13cd9
#: ../../networking2.rst:2979
msgid ""
"The admin is allowed to enable or disable GSLB functionality at region level."
msgstr ""

# dbd35e047b8d4eb89dde586187f3d0eb
#: ../../networking2.rst:2984
msgid "The admin is allowed to configure a zone as GSLB capable or enabled."
msgstr ""

# 58bd5b2c58a9407692791abdff3e6e54
#: ../../networking2.rst:2986
msgid ""
"A zone shall be considered as GSLB capable only if a GSLB service provider is "
"provisioned in the zone."
msgstr ""

# efc18977b5ac4e84a963305554993e11
#: ../../networking2.rst:2991
msgid ""
"When users have VMs deployed in multiple availability zones which are GSLB "
"enabled, they can use the GSLB functionality to load balance traffic across the "
"VMs in multiple zones."
msgstr ""

# e793a1e1efc84729991ede4558891921
#: ../../networking2.rst:2997
msgid ""
"The users can use GSLB to load balance across the VMs across zones in a region "
"only if the admin has enabled GSLB in that region."
msgstr ""

# 4c4a8f9e84ea44b19390f5fd020277fb
#: ../../networking2.rst:3002
msgid ""
"The users can load balance traffic across the availability zones in the same "
"region or different regions."
msgstr ""

# 4a914f83d04549c29de6013290e3e7f4
#: ../../networking2.rst:3007
msgid "The admin can configure DNS name for the entire cloud."
msgstr ""

# 596f9eade21844dfa16d3d964f7ce03d
#: ../../networking2.rst:3011
msgid ""
"The users can specify an unique name across the cloud for a globally load "
"balanced service. The provided name is used as the domain name under the DNS "
"name associated with the cloud."
msgstr ""

# 6547e809a9f240ed88dd1d5c4a9d325d
#: ../../networking2.rst:3015
msgid ""
"The user-provided name along with the admin-provided DNS name is used to produce "
"a globally resolvable FQDN for the globally load balanced service of the user. "
"For example, if the admin has configured xyztelco.com as the DNS name for the "
"cloud, and user specifies 'foo' for the GSLB virtual service, then the FQDN name "
"of the GSLB virtual service is foo.xyztelco.com."
msgstr ""

# 954c733062ed4faaae39782c315285fc
#: ../../networking2.rst:3024
msgid ""
"While setting up GSLB, users can select a load balancing method, such as round "
"robin, for using across the zones that are part of GSLB."
msgstr ""

# b7249d54a14f4c3e9ab5f0ef17a864dd
#: ../../networking2.rst:3029
msgid ""
"The user shall be able to set weight to zone-level virtual server. Weight shall "
"be considered by the load balancing method for distributing the traffic."
msgstr ""

# d0d2828b22794506bce6cc04c652759f
#: ../../networking2.rst:3035
msgid ""
"The GSLB functionality shall support session persistence, where series of client "
"requests for particular domain name is sent to a virtual server on the same zone."
msgstr ""

# fe2366a38bbf4359aa47d04dbbe9ef53
#: ../../networking2.rst:3039
msgid "Statistics is collected from each GSLB virtual server."
msgstr ""

# 310bede319094d1a81dd13ae031d171e
#: ../../networking2.rst:3044
msgid "Enabling GSLB in NetScaler"
msgstr ""

# 6cf5dc558b0541b38ee30e8b09f0a119
#: ../../networking2.rst:3046
msgid "In each zone, add GSLB-enabled NetScaler device for load balancing."
msgstr ""

# db33d472d3bd4ea6aefc696bbb848e61
#: ../../networking2.rst:3050
msgid "Log in as administrator to the CloudStack UI."
msgstr ""

# 71afbe01841a4e11a0fcc15b17786d36
#: ../../networking2.rst:3058
msgid "In Zones, click View More."
msgstr "Dans Zones, cliquer sur Voir plus."

# e790f063f0054d8fa2f47e81ff50ca59
#: ../../networking2.rst:3066
msgid ""
"Click the Physical Network tab, then click the name of the physical network."
msgstr ""

# 9e1c9696e24a415ca0080414be0196e6
#: ../../networking2.rst:3071
msgid "In the Network Service Providers node of the diagram, click Configure."
msgstr ""

# 536e22d770c44b319d5ee4d2ae4b2153
#: ../../networking2.rst:3074
msgid "You might have to scroll down to see this."
msgstr ""

# 21cd237381d44ee58898516d998a4372
#: ../../networking2.rst:3078
msgid "Click NetScaler."
msgstr "Citrix NetScaler."

# 5bca2c9d180b435bb43c10f72d8b4f50
#: ../../networking2.rst:3082
msgid "Click Add NetScaler device and provide the following:"
msgstr ""

# c101c1fb776f45a3b10751c976f19dff
#: ../../networking2.rst:3084
msgid "For NetScaler:"
msgstr ""

# 2ba731212f4e4d97bf33b98b02462f31
#: ../../networking2.rst:3088
msgid "**IP Address**: The IP address of the SDX."
msgstr ""

# f6756edb0b2749a28f89727cedd914de
#: ../../networking2.rst:3092
msgid ""
"**Username/Password**: The authentication credentials to access the device. "
"CloudStack uses these credentials to access the device."
msgstr ""

# c289535d0983447bb28313242c1afcfd
#: ../../networking2.rst:3098
msgid ""
"**Type**: The type of device that is being added. It could be F5 Big Ip Load "
"Balancer, NetScaler VPX, NetScaler MPX, or NetScaler SDX. For a comparison of "
"the NetScaler types, see the CloudStack Administration Guide."
msgstr ""

# fcf8d7c54d854ef6ac2504c8b710bdea
#: ../../networking2.rst:3105
msgid ""
"**Public interface**: Interface of device that is configured to be part of the "
"public network."
msgstr ""

# 770c0db7ca88466d9f7a6723075a9f24
#: ../../networking2.rst:3110
msgid ""
"**Private interface**: Interface of device that is configured to be part of the "
"private network."
msgstr ""

# ea63258ee8704f1d9b63279f814a6194
#: ../../networking2.rst:3115
msgid "**GSLB service**: Select this option."
msgstr ""

# 8b775a110efc48adafc54539a743a373
#: ../../networking2.rst:3119
msgid ""
"**GSLB service Public IP**: The public IP address of the NAT translator for a "
"GSLB service that is on a private network."
msgstr ""

# 721d09d62d574127acbc4eedf582a400
#: ../../networking2.rst:3124
msgid "**GSLB service Private IP**: The private IP of the GSLB service."
msgstr ""

# 58903b1562ff43d3ac2842018f153a1f
#: ../../networking2.rst:3128
msgid ""
"**Number of Retries**. Number of times to attempt a command on the device before "
"considering the operation failed. Default is 2."
msgstr ""

# 8453399635794a5dafd95e6644881b34
#: ../../networking2.rst:3133
msgid "**Capacity**: The number of networks the device can handle."
msgstr ""

# 032a009f433441a7a9ea141a1a37190f
#: ../../networking2.rst:3137
msgid ""
"**Dedicated**: When marked as dedicated, this device will be dedicated to a "
"single account. When Dedicated is checked, the value in the Capacity field has "
"no significance implicitly, its value is 1."
msgstr ""

# 9c1c5bdbb7b04a5081ee5ee1be823231
#: ../../networking2.rst:3149
msgid "Adding a GSLB Rule"
msgstr ""

# 9886f1b9081c4b2b9f94068c36234301
# c0bb3b92c34f4bc79ff38db4f1867976
#: ../../networking2.rst:3153 ../../networking2.rst:3224
msgid "Log in to the CloudStack UI as a domain administrator or user."
msgstr ""

# cf94d6818dfd454bb24a0197b45b1c89
# 1631e25bb98e44a68e0491ede5dc221d
#: ../../networking2.rst:3157 ../../networking2.rst:3228
msgid "In the left navigation pane, click Region."
msgstr ""

# 99089f1571d2400ba327b8e2e914141f
# d38f849a92654b41b37919edf2efdf78
#: ../../networking2.rst:3161 ../../networking2.rst:3232
msgid "Select the region for which you want to create a GSLB rule."
msgstr ""

# 17cf4f5a1948405ab27b253588ef1352
# 98821ced62fd453b90d3870422da2536
#: ../../networking2.rst:3165 ../../networking2.rst:3236
msgid "In the Details tab, click View GSLB."
msgstr ""

# 6a85608ee29b4baca127e393abe5ad11
#: ../../networking2.rst:3169
msgid "Click Add GSLB."
msgstr ""

# 0ae5d0eae58a463db228c0ee3c3f2d0e
#: ../../networking2.rst:3171
msgid "The Add GSLB page is displayed as follows:"
msgstr ""

# b9b04ceabaa9463d85a4faf511f47d57
#: ../../networking2.rst:3173
msgid "|gslb-add.png|"
msgstr "|gslb-add.png|"

# 3cc1ebf185774545998478f479bffa85
#: ../../networking2.rst:3181
msgid "**Name**: Name for the GSLB rule."
msgstr ""

# c0e402372e814565bdeff0182a1d1779
#: ../../networking2.rst:3185
msgid ""
"**Description**: (Optional) A short description of the GSLB rule that can be "
"displayed to users."
msgstr ""

# 727d582900354d2bb9e4a0301b19cc35
#: ../../networking2.rst:3190
msgid "**GSLB Domain Name**: A preferred domain name for the service."
msgstr ""

# ef12427c38c94561abed938f4a2bbd8c
#: ../../networking2.rst:3194
msgid ""
"**Algorithm**: (Optional) The algorithm to use to load balance the traffic "
"across the zones. The options are Round Robin, Least Connection, and Proximity."
msgstr ""

# 241c813551f64e92b78dfd290df99cfe
#: ../../networking2.rst:3200
msgid ""
"**Service Type**: The transport protocol to use for GSLB. The options are TCP "
"and UDP."
msgstr ""

# aa4bcbd25cf647e1ab4384586b654409
#: ../../networking2.rst:3205
msgid ""
"**Domain**: (Optional) The domain for which you want to create the GSLB rule."
msgstr ""

# 839afecaeeed4cbbb6ef0bb21bf498f3
#: ../../networking2.rst:3210
msgid ""
"**Account**: (Optional) The account on which you want to apply the GSLB rule."
msgstr ""

# 2ab62b2492a3407ca085e8666b106fa4
#: ../../networking2.rst:3220
msgid "Assigning Load Balancing Rules to GSLB"
msgstr ""

# 7c5601cd6ce640e8b5dc8a45589bad59
#: ../../networking2.rst:3240
msgid "Select the desired GSLB."
msgstr ""

# cf5bad08cdb4408c83d7b139e0c64547
#: ../../networking2.rst:3244
msgid "Click view assigned load balancing."
msgstr ""

# e8ee6a81561b4140a5fc1b69a76cc736
#: ../../networking2.rst:3248
msgid "Click assign more load balancing."
msgstr ""

# 645c7738ea8643bb8dc363416867e170
#: ../../networking2.rst:3252
msgid "Select the load balancing rule you have created for the zone."
msgstr ""

# 607875c969314174b33d5ffe591d6d01
#: ../../networking2.rst:3259
msgid "Known Limitation"
msgstr ""

# 7b4f744d0ba14d0793259da18acaa8e4
#: ../../networking2.rst:3261
msgid ""
"Currently, CloudStack does not support orchestration of services across the "
"zones. The notion of services and service providers in region are to be "
"introduced."
msgstr ""

# 07d2c270666b4ce5b27e2329f4a46336
#: ../../networking2.rst:3266
msgid "Guest IP Ranges"
msgstr "Plages IP invités"

# 5ba35a4bec1d4cd086d34463a8fd3b26
#: ../../networking2.rst:3268
msgid ""
"The IP ranges for guest network traffic are set on a per-account basis by the "
"user. This allows the users to configure their network in a fashion that will "
"enable VPN linking between their guest network and their clients."
msgstr ""
"Les plages d'IP pour le trafic réseau invité est configuré par compte par "
"l'utilisateur. Cela permet aux utilisateurs de configurer leur réseau de façon "
"qui va activer le lien VPN entre son réseau invité et ses clients."

# 24793eb079054dad8ef15f9ce2ce53ad
#: ../../networking2.rst:3273
msgid ""
"In shared networks in Basic zone and Security Group-enabled Advanced networks, "
"you will have the flexibility to add multiple guest IP ranges from different "
"subnets. You can add or remove one IP range at a time. For more information, see "
"`\"About Multiple IP Ranges\" <#about-multiple-ip-ranges>`_."
msgstr ""
"Sur des réseaux partagés dans une zone Basique et dans les réseaux Avancés avec "
"Groupes de Sécurité, vous aurez la souplesse d'ajouter de nombreuses plages "
"d'adresses IP invité depuis différents sous-réseaux. Vous pouvez ajouter ou "
"supprimer une plage IP à la fois. Pour plus d'informations, voir `\"A propos des "
"plages IP multiples\" <#about-multiple-ip-ranges>`_."

# 1a16911ddff840da827812b45ff09025
#: ../../networking2.rst:3280
msgid "Acquiring a New IP Address"
msgstr "Acquérir une nouvelle adresse IP"

# 2959313cb3534153848362cb02ce12c0
#: ../../networking2.rst:3308
msgid ""
"If you want Portable IP click Yes in the confirmation dialog. If you want a "
"normal Public IP click No."
msgstr ""
"Si vous voulez une IP portable, cliquez sur Oui dans la boîte de dialogue de "
"confirmation. Si vous voulez une IP public normale, cliquez sur Non."

# 83e09cc7cc8940f6aa9b890d0011f628
#: ../../networking2.rst:3311
msgid ""
"For more information on Portable IP, see `\"Portable IPs\" <#portable-ips>`_."
msgstr ""
"Pour plus d'information sur une IP Portable, voir `\"IPs Portables\" <#portable-"
"ips>`_."

# e238190f4d8f4177ac72494fa5eb1d72
#: ../../networking2.rst:3319
msgid "Releasing an IP Address"
msgstr "Libérer une adresse IP"

# 84c5bd1b7c19450b9c9a23243730fa62
#: ../../networking2.rst:3321
msgid ""
"When the last rule for an IP address is removed, you can release that IP "
"address. The IP address still belongs to the VPC; however, it can be picked up "
"for any guest network again."
msgstr ""
"Lorsque la dernière règle pour une adresse IP est supprimée, vous pouvez libérer "
"cette adresse IP. L'adresse IP appartient toujours au VPC ; toutefois elle peut "
"être à nouveau reprise pour n'importe quel réseau invité."

# cf51c9fcec0b45fa99f4d7aeeb1b1c06
#: ../../networking2.rst:3343
msgid "Click the IP address you want to release."
msgstr "Cliquer sur l'adresse IP que vous voulez libérer."

# e09fbcc9c5114e19a679764fe1714c1a
#: ../../networking2.rst:3347
msgid "Click the Release IP button. |ReleaseIPButton.png|"
msgstr "Cliquer sur le bouton Libérer. |ReleaseIPButton.png|"

# a1e27ff808d74a1ca5f49c2d72593b00
# c329d8910228495faeb8d66b4e61c0b6
# f699725aeceb41beb4bd661924beb0fe
# b55b701c8a634f42a9019c46b5f7a204
# 7c788a2a5d3640c99e8cc0ae99940251
# 160c7d49caad47f7ae0c0b2f98aff672
# 37a5880aa697458fb42243e1e26fc671
# 8980bc62961847a7bb55dc12efac6df7
# 1918561df94f4fa4bfa406d4ed4cd1a1
# b5960db5e5104fafa693db42db76ba47
# 9cd72aa996794ce4bd207159d1fa8742
# abe42da7383441778d0131125e8ff6c8
#: ../../networking2.rst:3351 ../../networking2.rst:3923 ../../networking2.rst:4395
#: ../../networking2.rst:4495 ../../networking2.rst:4687 ../../networking2.rst:5291
#: ../../networking2.rst:5550 ../../networking2.rst:5876 ../../networking2.rst:5963
#: ../../networking2.rst:6055 ../../networking2.rst:6298 ../../networking2.rst:6692
msgid "Static NAT"
msgstr "Static NAT"

# b1f96220fd994b41b5fa5fdebccab0b4
#: ../../networking2.rst:3353
msgid ""
"A static NAT rule maps a public IP address to the private IP address of a VM in "
"order to allow Internet traffic into the VM. The public IP address always "
"remains the same, which is why it is called â€œstaticâ€ NAT. This section tells "
"how to enable or disable static NAT for a particular IP address."
msgstr ""
"Une règle de NAT statique associe une adresse IP publique à l'adresse IP privée "
"d'une VM afin de permettre le trafic Internet vers la machine virtuelle. "
"L'adresse IP publique reste toujours la même, raison pour laquelle cette "
"solution est appelée static NAT. Cette section explique comment activer ou "
"désactiver le static NAT pour une adresse IP particulière."

# d98473b1ef2041a7877e6841336bbe2f
#: ../../networking2.rst:3360
msgid "Enabling or Disabling Static NAT"
msgstr "Activer ou désactiver un NAT Statique"

# 66e31a75defd4e2e88802eaa37a23902
# 507d4788f25d423c84d95132346afd2b
#: ../../networking2.rst:3362 ../../networking2.rst:6014
msgid ""
"If port forwarding rules are already in effect for an IP address, you cannot "
"enable static NAT to that IP."
msgstr ""
"Si les règles de redirection de port sont déjà mise en oeuvre pour une adresse "
"IP, vous ne pouvez pas activer le static NAT pour cette IP."

# 28d0504840374a70bd1ec4eab3c57295
# dd68e0b051b34d709557d0f739c568ac
#: ../../networking2.rst:3365 ../../networking2.rst:6017
msgid ""
"If a guest VM is part of more than one network, static NAT rules will function "
"only if they are defined on the default network."
msgstr ""
"Si une VM invitée fait partie de plus d'un réseau, les règles de static NAT ne "
"fonctionneront uniquement si elle sont définies sur le réseau par défaut."

# 4f6ac41af4434f21b7bbb61428e5bd46
# 6f85b85b1cd24dbeb7fffdbd01f0afa2
#: ../../networking2.rst:3386 ../../networking2.rst:3460
msgid "Click the IP address you want to work with."
msgstr "Cliquer sur l'adresse IP avec laquelle vous voulez travailler."

# 326984a3cc3446ed806cf614b48f5841
#: ../../networking2.rst:3390
msgid "Click the Static NAT |enabledisablenat.png| button."
msgstr "Cliquer sur le bouton Static NAT |enabledisablenat.png|."

# a372a7da12b54432889a1a60bab4be8a
#: ../../networking2.rst:3393
msgid ""
"The button toggles between Enable and Disable, depending on whether static NAT "
"is currently enabled for the IP address."
msgstr ""
"Le bouton bascule entre Activer et Désactiver, selon que le static NAT est "
"actuellement activé pour l'adresse IP."

# 78c5d4edd8db44cf9d448e10f2a89813
#: ../../networking2.rst:3398
msgid ""
"If you are enabling static NAT, a dialog appears where you can choose the "
"destination VM and click Apply."
msgstr ""
"Si vous activez le static NAT, une boite de dialogue apparaît dans laquelle vous "
"pouvez choisir la VM cible et cliquer sur Appliquer."

# 88e457a0ae3145f49ab4f361af8d4a4a
#: ../../networking2.rst:3402
msgid "IP Forwarding and Firewalling"
msgstr "Redirection IP et pare-feu"

# 9abca0c542c1441f8b116871bcce046d
#: ../../networking2.rst:3404
msgid ""
"By default, all incoming traffic to the public IP address is rejected. All "
"outgoing traffic from the guests is also blocked by default."
msgstr ""

# 1dd28301d9264826b4c64d6f13edf77f
#: ../../networking2.rst:3407
msgid "To allow outgoing traffic, follow the procedure in :ref:`egress-fw-rules`."
msgstr ""

# 35f67e1320f941ac85f0fbb87f8fb385
#: ../../networking2.rst:3409
msgid ""
"To allow incoming traffic, users may set up firewall rules and/or port "
"forwarding rules. For example, you can use a firewall rule to open a range of "
"ports on the public IP address, such as 33 through 44. Then use port forwarding "
"rules to direct traffic from individual ports within that range to specific "
"ports on user VMs. For example, one port forwarding rule could route incoming "
"traffic on the public IP's port 33 to port 100 on one user VM's private IP."
msgstr ""

# 9229b4cb0661463cab6efc5582184abc
#: ../../networking2.rst:3418
msgid "Firewall Rules"
msgstr "Règles du parefeu"

# d51a292426874329a0951777c1772476
#: ../../networking2.rst:3420
msgid ""
"By default, all incoming traffic to the public IP address is rejected by the "
"firewall. To allow external traffic, you can open firewall ports by specifying "
"firewall rules. You can optionally specify one or more CIDRs to filter the "
"source IPs. This is useful when you want to allow only incoming requests from "
"certain IP addresses."
msgstr ""

# 59963a8e5da34833bc437796df5d300c
#: ../../networking2.rst:3426
msgid ""
"You cannot use firewall rules to open ports for an elastic IP address. When "
"elastic IP is used, outside access is instead controlled through the use of "
"security groups. See `\"Adding a Security Group\" <#adding-a-security-group>`_."
msgstr ""

# f9d2eb76396f4589896d0f4797e8c77b
#: ../../networking2.rst:3431
msgid ""
"In an advanced zone, you can also create egress firewall rules by using the "
"virtual router. For more information, see \":ref:`egress-fw-rules`\"."
msgstr ""

# ee967d9902434ce68b69c49226492070
#: ../../networking2.rst:3434
msgid ""
"Firewall rules can be created using the Firewall tab in the Management Server "
"UI. This tab is not displayed by default when CloudStack is installed. To "
"display the Firewall tab, the CloudStack administrator must set the global "
"configuration parameter firewall.rule.ui.enabled to \"true.\""
msgstr ""

# 9ceb40041acc44ed8cb1dbd759ffa528
#: ../../networking2.rst:3440
msgid "To create a firewall rule:"
msgstr "Pour créer une règle de parefeu :"

# c2c48ea9ba7d4778bc6bc6820adf83f0
#: ../../networking2.rst:3464
msgid "Click the Configuration tab and fill in the following values."
msgstr ""

# f889ae51ce804cde9da76459ef8ca9f6
#: ../../networking2.rst:3468
msgid ""
"**Source CIDR**. (Optional) To accept only traffic from IP addresses within a "
"particular address block, enter a CIDR or a comma-separated list of CIDRs. "
"Example: 192.168.0.0/22. Leave empty to allow all CIDRs."
msgstr ""

# 036b027b27144215b7da6ad75fa7c68e
#: ../../networking2.rst:3475
msgid "**Protocol**. The communication protocol in use on the opened port(s)."
msgstr ""

# d8ab296b3ccd4f159dba1554303104e4
#: ../../networking2.rst:3480
msgid ""
"**Start Port and End Port**. The port(s) you want to open on the firewall. If "
"you are opening a single port, use the same number in both fields"
msgstr ""

# 45ba206ce4584c259c3d086badc5d9dc
#: ../../networking2.rst:3486
msgid ""
"**ICMP Type and ICMP Code**. Used only if Protocol is set to ICMP. Provide the "
"type and code required by the ICMP protocol to fill out the ICMP header. Refer "
"to ICMP documentation for more details if you are not sure what to enter"
msgstr ""

# 83c407ae9e1d47c5a3a71b8e00327dee
#: ../../networking2.rst:3498
msgid "Egress Firewall Rules in an Advanced Zone"
msgstr ""

# 5c422781131a4989a954e4495b8e8630
#: ../../networking2.rst:3500
msgid ""
"The egress traffic originates from a private network to a public network, such "
"as the Internet. By default, the egress traffic is blocked in default network "
"offerings, so no outgoing traffic is allowed from a guest network to the "
"Internet. However, you can control the egress traffic in an Advanced zone by "
"creating egress firewall rules. When an egress firewall rule is applied, the "
"traffic specific to the rule is allowed and the remaining traffic is blocked. "
"When all the firewall rules are removed the default policy, Block, is applied."
msgstr ""

# 9feacce2e10b4e7890c88a3bcc0a75fa
#: ../../networking2.rst:3512
msgid "Consider the following scenarios to apply egress firewall rules:"
msgstr ""

# 2fbbeae49f87458890dd0c859e95d758
#: ../../networking2.rst:3516
msgid "Egress firewall rules are supported on Juniper SRX and virtual router."
msgstr ""

# 4559d85d3913439095bf17b9b34c926e
#: ../../networking2.rst:3521
msgid "The egress firewall rules are not supported on shared networks."
msgstr ""

# 83d00a1385a048c1a78d6ff81e6d2c18
#: ../../networking2.rst:3525
msgid ""
"Allow the egress traffic from specified source CIDR. The Source CIDR is part of "
"guest network CIDR."
msgstr ""

# 958ef1560ca04b98b84aad9240aa503e
#: ../../networking2.rst:3530
msgid "Allow the egress traffic with protocol TCP,UDP,ICMP, or ALL."
msgstr ""

# 07016fef8ef94149b04668cd6107f2a4
#: ../../networking2.rst:3534
msgid ""
"Allow the egress traffic with protocol and destination port range. The port "
"range is specified for TCP, UDP or for ICMP type and code."
msgstr ""

# d4588055cabf49ef8eb1caa7313a181a
#: ../../networking2.rst:3539
msgid ""
"The default policy is Allow for the new network offerings, whereas on upgrade "
"existing network offerings with firewall service providers will have the default "
"egress policy Deny."
msgstr ""

# 73084bef40134e449ffe9d78b00d3ba2
#: ../../networking2.rst:3544
msgid "Configuring an Egress Firewall Rule"
msgstr ""

# eed98622c7604cfa83eec241a54202d7
#: ../../networking2.rst:3556
msgid ""
"In Select view, choose Guest networks, then click the Guest network you want."
msgstr ""

# 8d5d5eaa44ef455786d9d7d6a412826e
#: ../../networking2.rst:3561
msgid ""
"To add an egress rule, click the Egress rules tab and fill out the following "
"fields to specify what type of traffic is allowed to be sent out of VM instances "
"in this guest network:"
msgstr ""

# 615b7e1b5d4a4afba201cbd868ebcae4
#: ../../networking2.rst:3565
msgid "|egress-firewall-rule.png|"
msgstr "|egress-firewall-rule.png|"

# 3b0e293e06344c648450ac61d33c6e86
#: ../../networking2.rst:3569
msgid ""
"**CIDR**: (Add by CIDR only) To send traffic only to the IP addresses within a "
"particular address block, enter a CIDR or a comma-separated list of CIDRs. The "
"CIDR is the base IP address of the destination. For example, 192.168.0.0/22. To "
"allow all CIDRs, set to 0.0.0.0/0."
msgstr ""

# a81a39ae46914bcbb4b99900eb016883
#: ../../networking2.rst:3577
msgid ""
"**Protocol**: The networking protocol that VMs uses to send outgoing traffic. "
"The TCP and UDP protocols are typically used for data exchange and end-user "
"communications. The ICMP protocol is typically used to send error messages or "
"network monitoring data."
msgstr ""

# cf939bab32ca4167afcce4eddff3015e
#: ../../networking2.rst:3584
msgid ""
"**Start Port, End Port**: (TCP, UDP only) A range of listening ports that are "
"the destination for the outgoing traffic. If you are opening a single port, use "
"the same number in both fields."
msgstr ""

# 12c38b633f1f4796af7e5704d6128627
#: ../../networking2.rst:3590
msgid ""
"**ICMP Type, ICMP Code**: (ICMP only) The type of message and error code that "
"are sent."
msgstr ""

# 2cd26bb0b191473db9267cd6ec1492e7
#: ../../networking2.rst:3598
msgid "Configuring the Default Egress Policy"
msgstr ""

# 68762a16d8b94ae298a95f68573272e3
#: ../../networking2.rst:3600
msgid ""
"The default egress policy for Isolated guest network is configured by using "
"Network offering. Use the create network offering option to determine whether "
"the default policy should be block or allow all the traffic to the public "
"network from a guest network. Use this network offering to create the network. "
"If no policy is specified, by default all the traffic is allowed from the guest "
"network that you create by using this network offering."
msgstr ""

# 1113d91089884de2966c0431459b50af
#: ../../networking2.rst:3608
msgid "You have two options: Allow and Deny."
msgstr ""

# 675178fcb7144053a9b257ebdc760670
#: ../../networking2.rst:3611
msgid "Allow"
msgstr "Autoriser"

# db1c618c19734644b9f8f3714393f25c
#: ../../networking2.rst:3613
msgid ""
"If you select Allow for a network offering, by default egress traffic is "
"allowed. However, when an egress rule is configured for a guest network, rules "
"are applied to block the specified traffic and rest are allowed. If no egress "
"rules are configured for the network, egress traffic is accepted."
msgstr ""

# cd74f40051e845018f993bc3377272b7
# ada70d776fb44fff9ae52224ac02290a
# 6870c74dca5142b0a048f825f2f357dc
#: ../../networking2.rst:3620 ../../networking2.rst:5253 ../../networking2.rst:5254
msgid "Deny"
msgstr "Refuser"

# 8766188244b541e08448f923693d31d9
#: ../../networking2.rst:3622
msgid ""
"If you select Deny for a network offering, by default egress traffic for the "
"guest network is blocked. However, when an egress rules is configured for a "
"guest network, rules are applied to allow the specified traffic. While "
"implementing a guest network, CloudStack adds the firewall egress rule specific "
"to the default egress policy for the guest network."
msgstr ""

# 57f1dde63b4949e5a229d6af14593571
#: ../../networking2.rst:3629
msgid "This feature is supported only on virtual router and Juniper SRX."
msgstr ""

# a711b3baa28c4e3fa0ee4a98adacfcc8
#: ../../networking2.rst:3633
msgid "Create a network offering with your desirable default egress policy:"
msgstr ""

# c311057000004a4bb96e882cffcc28ce
#: ../../networking2.rst:3637
msgid "Log in with admin privileges to the CloudStack UI."
msgstr "Se connecter avec les droits d'administrateur à l'interface CloudStack."

# 25106537239545dc82409a24f0e06bd6
#: ../../networking2.rst:3641
msgid "In the left navigation bar, click Service Offerings."
msgstr "Dans la barre de navigation de gauche, cliquer sur les Offres de Service."

# 9289d78fd54546e3ac890ba5e790db43
#: ../../networking2.rst:3645
msgid "In Select Offering, choose Network Offering."
msgstr "Dans Sélectionner une offre, choisir une offre réseau."

# 09e3077c1dd044d899bb41898736a9b2
# f6c2630b089b4f4ab8805c97a1cae4af
# e7fccdf8282c4f6c8d7a6e5836840c19
#: ../../networking2.rst:3649 ../../networking2.rst:6181 ../../networking2.rst:6486
msgid "Click Add Network Offering."
msgstr "Cliquer sur Ajouter une offre de réseau."

# 9c68f5258ad84445be883d57d0570c1e
#: ../../networking2.rst:3653
msgid "In the dialog, make necessary choices, including firewall provider."
msgstr ""

# cc2848c801fa426abd8304928f336162
#: ../../networking2.rst:3658
msgid "In the Default egress policy field, specify the behaviour."
msgstr ""

# a536099bc33f41dca54d66a4d01bd083
#: ../../networking2.rst:3666
msgid "Create an isolated network by using this network offering."
msgstr ""

# 4d9a8aef2dad4881b4fc8e1396be6aa2
#: ../../networking2.rst:3668
msgid ""
"Based on your selection, the network will have the egress public traffic blocked "
"or allowed."
msgstr ""

# fbdeecae49e641c1b71f8f62cb19d1e8
#: ../../networking2.rst:3672
msgid "Port Forwarding"
msgstr "Redirection de port"

# 242ca59ae1ec44818bf282c05c1a6171
#: ../../networking2.rst:3674
msgid ""
"A port forward service is a set of port forwarding rules that define a policy. A "
"port forward service is then applied to one or more guest VMs. The guest VM then "
"has its inbound network access managed according to the policy defined by the "
"port forwarding service. You can optionally specify one or more CIDRs to filter "
"the source IPs. This is useful when you want to allow only incoming requests "
"from certain IP addresses to be forwarded."
msgstr ""

# 6d1f9b4d8e6d4fe090b4bbf4f93459bd
#: ../../networking2.rst:3682
msgid ""
"A guest VM can be in any number of port forward services. Port forward services "
"can be defined but have no members. If a guest VM is part of more than one "
"network, port forwarding rules will function only if they are defined on the "
"default network"
msgstr ""

# 0986f075d3ae43e980cfa47acdab6ffe
#: ../../networking2.rst:3687
msgid ""
"You cannot use port forwarding to open ports for an elastic IP address. When "
"elastic IP is used, outside access is instead controlled through the use of "
"security groups. See Security Groups."
msgstr ""

# 31bccf868e794f2cbdddcca69224bad3
#: ../../networking2.rst:3691
msgid "To set up port forwarding:"
msgstr "Pour configurer la redirection de port :"

# 16dcd6a5ef644770900cdcce80794c67
#: ../../networking2.rst:3699
msgid ""
"If you have not already done so, add a public IP address range to a zone in "
"CloudStack. See Adding a Zone and Pod in the Installation Guide."
msgstr ""

# 3bd594ec854b43b583f5c33092e99657
#: ../../networking2.rst:3705
msgid "Add one or more VM instances to CloudStack."
msgstr ""

# 67e6520d95a749bca1dfd8ee7d653c61
#: ../../networking2.rst:3709
msgid "In the left navigation bar, click Network."
msgstr "Dans la barre de navigation de gauche, cliquer sur Réseau."

# 8ec41137f3064dbf9b135e9131c01078
#: ../../networking2.rst:3713
msgid "Click the name of the guest network where the VMs are running."
msgstr ""

# edc2c92eb5c940938babba424e0ab0a7
#: ../../networking2.rst:3717
msgid ""
"Choose an existing IP address or acquire a new IP address. See `\"Acquiring a "
"New IP Address\" <#acquiring-a-new-ip-address>`_. Click the name of the IP "
"address in the list."
msgstr ""

# 94e2eab0e63b4fc3857c9bd41223a42c
#: ../../networking2.rst:3724
msgid "Click the Configuration tab."
msgstr "Cliquer sur l'onglet Configuration."

# 44faf09e38934875bdb4123f711051b7
# 5bd7a3feb2a74eedb79b444a48452c5d
#: ../../networking2.rst:3728 ../../networking2.rst:6733
msgid "In the Port Forwarding node of the diagram, click View All."
msgstr ""

# f513170f116e42d98255397872cd84b2
#: ../../networking2.rst:3736
msgid ""
"**Public Port**. The port to which public traffic will be addressed on the IP "
"address you acquired in the previous step."
msgstr ""

# 1e1f06ab8e7d4b228f0671927b1d37b7
#: ../../networking2.rst:3741
msgid ""
"**Private Port**. The port on which the instance is listening for forwarded "
"public traffic."
msgstr ""

# b96619b413e4435494d46e6c18e985b6
#: ../../networking2.rst:3746
msgid "**Protocol**. The communication protocol in use between the two ports"
msgstr ""

# 189bbad94193454d80e285996b14f052
#: ../../networking2.rst:3754
msgid "IP Load Balancing"
msgstr "Répartition de charge IP"

# 8bb4fc89584047a4979eb7ade38555ac
#: ../../networking2.rst:3756
msgid ""
"The user may choose to associate the same public IP for multiple guests. "
"CloudStack implements a TCP-level load balancer with the following policies."
msgstr ""
"L'utilisateur peut choisir d'associer la même IP publique pour plusieurs "
"invités. CloudStack implémente un répartiteur de charge de niveau TCP avec les "
"règles suivantes."

# 2d62543390a44d9b86be0973a26237e3
# 71d3f562cf68451d95abf2e2855c938f
# a91ad3d092144bad9c7c61b4fae3c2e9
#: ../../networking2.rst:3762 ../../networking2.rst:6371 ../../networking2.rst:6644
msgid "Round-robin"
msgstr "Round-robin"

# 8fd8ce7230194556b444745abd07c778
#: ../../networking2.rst:3766
msgid "Least connection"
msgstr "La plus petite connexion"

# 5f1fa380f5a1493cbb22ae41bd77eab0
#: ../../networking2.rst:3770
msgid "Source IP"
msgstr "IP source"

# e337b776e21743439b7207bfb4c76b76
#: ../../networking2.rst:3772
msgid ""
"This is similar to port forwarding but the destination may be multiple IP "
"addresses."
msgstr ""
"C'est similaire à la redirection de port mais la destination peut être plusieurs "
"adresses IP."

# 348ae44471844fa39d0776a54c21522c
#: ../../networking2.rst:3776
msgid "DNS and DHCP"
msgstr "DNS et DHCP"

# e9f3ca6c9e6f429bb4fe851ef31d2037
#: ../../networking2.rst:3778
msgid ""
"The Virtual Router provides DNS and DHCP services to the guests. It proxies DNS "
"requests to the DNS server configured on the Availability Zone."
msgstr ""
"Le routeur virtuel fourni les services DNS et DHCP aux invités. Il relaie les "
"requêtes DNS aux serveurs DNS configurés dans la Zone disponible."

# dd8cfae4c4df4db5abe405b9fc23f91c
#: ../../networking2.rst:3783
msgid "Remote Access VPN"
msgstr "Accès distant VPN"

# 421361e0532246a2b00b1aabc0663fa7
#: ../../networking2.rst:3785
msgid ""
"CloudStack account owners can create virtual private networks (VPN) to access "
"their virtual machines. If the guest network is instantiated from a network "
"offering that offers the Remote Access VPN service, the virtual router (based on "
"the System VM) is used to provide the service. CloudStack provides a L2TP-over-"
"IPsec-based remote access VPN service to guest virtual networks. Since each "
"network gets its own virtual router, VPNs are not shared across the networks. "
"VPN clients native to Windows, Mac OS X and iOS can be used to connect to the "
"guest networks. The account owner can create and manage users for their VPN. "
"CloudStack does not use its account database for this purpose but uses a "
"separate table. The VPN user database is shared across all the VPNs created by "
"the account owner. All VPN users get access to all VPNs created by the account "
"owner."
msgstr ""

# a732cf37468141f3b91c785a8153d60d
#: ../../networking2.rst:3800
msgid ""
"Make sure that not all traffic goes through the VPN. That is, the route "
"installed by the VPN should be only for the guest network and not for all "
"traffic."
msgstr ""

# 4dbb5c3287b64cd5abc3987f02c48b48
#: ../../networking2.rst:3806
msgid ""
"**Road Warrior / Remote Access**. Users want to be able to connect securely from "
"a home or office to a private network in the cloud. Typically, the IP address of "
"the connecting client is dynamic and cannot be preconfigured on the VPN server."
msgstr ""

# eb6134e7170946da9f096bcd062d7aad
#: ../../networking2.rst:3813
msgid ""
"**Site to Site**. In this scenario, two private subnets are connected over the "
"public Internet with a secure VPN tunnel. The cloud user's subnet (for example, "
"an office network) is connected through a gateway to the network in the cloud. "
"The address of the user's gateway must be preconfigured on the VPN server in the "
"cloud. Note that although L2TP-over-IPsec can be used to set up Site-to-Site "
"VPNs, this is not the primary intent of this feature. For more information, see "
"\":ref:`setting-s2s-vpn-conn`\"."
msgstr ""

# 7dd56949a6f74a439a60c07ad67f722a
#: ../../networking2.rst:3823
msgid "Configuring Remote Access VPN"
msgstr ""

# 0061faa9e6cd4ad59954ed3c0856b411
#: ../../networking2.rst:3825
msgid "To set up VPN for the cloud:"
msgstr ""

# 0e3ff971fa3d4442848a972f64282837
#: ../../networking2.rst:3833
msgid "In the left navigation, click Global Settings."
msgstr ""

# c2fc515f4e564cf48108c56364709b7b
#: ../../networking2.rst:3837
msgid "Set the following global configuration parameters."
msgstr ""

# 6e225aa038964885a007931b82b18986
#: ../../networking2.rst:3841
msgid ""
"remote.access.vpn.client.ip.range - The range of IP addresses to be allocated to "
"remote access VPN clients. The first IP in the range is used by the VPN server."
msgstr ""

# 1639d05b22d9481b8b92fc8a707d027a
#: ../../networking2.rst:3847
msgid "remote.access.vpn.psk.length - Length of the IPSec key."
msgstr ""

# d8c75e5dc742435ca19c4a06e2a61ecd
#: ../../networking2.rst:3851
msgid "remote.access.vpn.user.limit - Maximum number of VPN users per account."
msgstr ""

# 3f55599605614d13a5e11b6eb4a74bfa
#: ../../networking2.rst:3854
msgid "To enable VPN for a particular network:"
msgstr ""

# 37b4e592dd084399a75751ec656055ca
# f5662606b3e94deaa8d00053c5b1f843
#: ../../networking2.rst:3858 ../../networking2.rst:3894
msgid "Log in as a user or administrator to the CloudStack UI."
msgstr ""

# c949dee3a72b40e1aa492da5a563a3bf
# b4fa7486bbc9431d8834b563df517c52
#: ../../networking2.rst:3862 ../../networking2.rst:3898
msgid "In the left navigation, click Network."
msgstr ""

# 89d5b593db5e47e4b8d8ba9343bb9a81
#: ../../networking2.rst:3866
msgid "Click the name of the network you want to work with."
msgstr ""

# 7f1c96aff09c4aca89166670c00e135b
#: ../../networking2.rst:3874
msgid "Click one of the displayed IP address names."
msgstr ""

# c037fe41e67e44569c8ef9d9ed2c87de
# 0b7e6681912942398e9b55f50db5fabb
#: ../../networking2.rst:3878 ../../networking2.rst:3963
msgid "Click the Enable VPN button. |vpn-icon.png|"
msgstr ""

# d8ac0fa0cc1f430ab2dabd3976e35a13
#: ../../networking2.rst:3880
msgid "The IPsec key is displayed in a popup window."
msgstr ""

# 3b6c749a19ac411e85a91bebde5620ac
#: ../../networking2.rst:3883
msgid "Configuring Remote Access VPN in VPC"
msgstr ""

# 24849989ce59453cb53461958b872d24
#: ../../networking2.rst:3885
msgid ""
"On enabling Remote Access VPN on a VPC, any VPN client present outside the VPC "
"can access VMs present in the VPC by using the Remote VPN connection. The VPN "
"client can be present anywhere except inside the VPC on which the user enabled "
"the Remote Access VPN service."
msgstr ""

# 9fe0ef310ce946a4b81eb99779e7d6e2
#: ../../networking2.rst:3890
msgid "To enable VPN for a VPC:"
msgstr ""

# a35416d0aa534a0786c5008000fd8e43
# e9f7b5e6165a407b8c8f26dbd4564cea
# 70b305de6a494311b862c80f66aec1ce
# 77e179e8fd184282bca07276311f4193
# c258a12f71d44428b74e9dace4023355
# e34ba66fcef1410680e2597a9d2a8954
# 2becfb5ca8464b0486c1fe7c82b5a4e3
# 0712e1bd6b914f2885daf1e5febb7442
# 97c2acefafb34f709fcc84b7a4dc40b9
# b527a3e4798548ab91c07365a835ea9c
# 3e347e3728d44b79a3475adb8b0600f2
# b12fa2f420ac47059eb47eb95abebe58
# 27fcf04f38494625a2efecfad5de2f9c
# 9f39d7e9da4d40e5be4cbf6b4666758a
# f624d82ab7e649288e146d0cebab16e0
# 1895dd237c1341b295430829d5c5950c
# f40ec8edcf6f46ff93c1db49b2d59307
# 0eb2cf52b2f144dfb78982d1caa03b35
#: ../../networking2.rst:3902 ../../networking2.rst:4370 ../../networking2.rst:4467
#: ../../networking2.rst:4658 ../../networking2.rst:5074 ../../networking2.rst:5139
#: ../../networking2.rst:5270 ../../networking2.rst:5352 ../../networking2.rst:5521
#: ../../networking2.rst:5760 ../../networking2.rst:5851 ../../networking2.rst:5939
#: ../../networking2.rst:6030 ../../networking2.rst:6273 ../../networking2.rst:6583
#: ../../networking2.rst:6667 ../../networking2.rst:6792 ../../networking2.rst:6831
msgid "In the Select view, select VPC."
msgstr ""

# ec4a1f9371cd43e39a21d45da9e513e9
# 903528c98fb6402081d0c518396e4d5a
# 02c81362a5294fe885a28cc0abe9f5a9
# 8449bcf110af4969aeb6172fafda2205
# a213eb463b5c421bbd5a602580f1b51a
# 32bed119537345e7aa5c1f4d2ec728a5
# f826c1e8499f44a7b886ac07bbeb0b5f
# e3d9e5ecc1964bd880bc814a1c8a935b
# 0d0c7e45230d4a7bb6d548c856fa8f7a
# f4df1631caf646afad3bba723757c066
# e30097b3b31c4398bab851342cc05e17
# f26cae26e34e447e86996448bd94ee59
# 5e20c449bba64885af814ea48d956e2c
# ac7881d3dc5743a1baad101ab5045e35
#: ../../networking2.rst:3904 ../../networking2.rst:4372 ../../networking2.rst:4660
#: ../../networking2.rst:5272 ../../networking2.rst:5354 ../../networking2.rst:5523
#: ../../networking2.rst:5762 ../../networking2.rst:5853 ../../networking2.rst:5941
#: ../../networking2.rst:6032 ../../networking2.rst:6275 ../../networking2.rst:6585
#: ../../networking2.rst:6669 ../../networking2.rst:6833
msgid "All the VPCs that you have created for the account is listed in the page."
msgstr ""

# 7b4b5acd29144a01a92211053af28180
# 8993b44d5f7c418aafe0163c0dc2f320
# 1c850ec226f5448797b19cee4f4bbdda
#: ../../networking2.rst:3909 ../../networking2.rst:5277 ../../networking2.rst:5359
msgid "Click the Configure button of the VPC."
msgstr ""

# 41f127a431e44ea1af73a4efd93d50dd
# 4663a4f2b9d749bdaa308b9c71f6625a
# 6517ef547f114583b55ea471ddfa3e96
# f95ad4b883994ccab44a025f2b50f7e7
# 8e35937d2ca84fa6905cf264caabfb6b
# b7d205c295044f38ad749b9b58a45281
# c33a19c6331843fca695c025eef65638
#: ../../networking2.rst:3911 ../../networking2.rst:4383 ../../networking2.rst:4483
#: ../../networking2.rst:4675 ../../networking2.rst:5279 ../../networking2.rst:6286
#: ../../networking2.rst:6680
msgid "For each tier, the following options are displayed:"
msgstr ""

# d36b5f8182cf4512aadad3221d7dd83d
# dc877a54fec94d7cae1f81bdb0023b94
# 8a8bdc30b2174cacbb572f5ad4c98a7b
# 1b988edb0d8e4314a7eb8c37c3cfbf77
# c30de8bbacbe4334a9b05a16ff351461
# df7817d8060843d69314130c722fe9b6
# c68c4a643bc0413a811ad7a01bfdc606
# 0166943624e64d68860eafa9e58ab9bd
# d21582e266e543afb57737fda85467b5
# 6fa5c9555c7e46ac9ef191dd4173f8da
# e6cdbca9e85d47b9b042e1f0310461fe
#: ../../networking2.rst:3915 ../../networking2.rst:4387 ../../networking2.rst:4487
#: ../../networking2.rst:4679 ../../networking2.rst:5283 ../../networking2.rst:5542
#: ../../networking2.rst:5868 ../../networking2.rst:5955 ../../networking2.rst:6047
#: ../../networking2.rst:6290 ../../networking2.rst:6684
msgid "Internal LB"
msgstr ""

# 6fa74bd617c04d698de6f38bf2416158
# b4ec2750e056403ab30e230857867f11
# 051be71f2d03468f854f32b5dfdb6439
# e6dce01524cb4e9392a365a592674ec5
# 3ac84bc009234f6a8e8a1f1caebe83a1
# fc8ff98a80744b8a811a5f1c8f805de5
# 7d23ee0ec36f41ed93929f00828f848d
# 37dc837b902246d3855ec01eda4c0be2
# 64590fae08ae4c8bbba1feb231077932
# e77c1fc68625472b9ecf752fb5790551
# 00a7eccc5d684130b79b1d1451b6390f
#: ../../networking2.rst:3919 ../../networking2.rst:4391 ../../networking2.rst:4491
#: ../../networking2.rst:4683 ../../networking2.rst:5287 ../../networking2.rst:5546
#: ../../networking2.rst:5872 ../../networking2.rst:5959 ../../networking2.rst:6051
#: ../../networking2.rst:6294 ../../networking2.rst:6688
msgid "Public LB IP"
msgstr ""

# fab3827cfc494ecd8b648f564a195172
# 19cff60834f84a7b91d3dd25f4eff4f5
# d38259f3d32d473980ccdef9d1689608
# 0846fc98b6fc40eabb78391a7641f248
# 14c417b19bdf4c3f8a22c9302c8edc7f
# 11a737406efb4d0d987480bda52770e0
# 65eadb3d777e4e10b89edf86e21a965e
# d0731ebc92ab457d919264f55f94e1d8
# ecfaad1840444dc5b5fc9fecfd3a5db8
# f87032d442244dd9ace6770bd77cc552
# 53d5237aaea24a448651d13727dcba17
#: ../../networking2.rst:3927 ../../networking2.rst:4399 ../../networking2.rst:4499
#: ../../networking2.rst:4691 ../../networking2.rst:5295 ../../networking2.rst:5554
#: ../../networking2.rst:5880 ../../networking2.rst:5967 ../../networking2.rst:6059
#: ../../networking2.rst:6302 ../../networking2.rst:6696
msgid "Virtual Machines"
msgstr ""

# 55332d391cdd468495ad76f952811577
# 46bedbc30be240609724ff6eee13c73e
# 78e5566733024d098b27e7a0ac093950
# 4ffb5ac895d04c9bb052f07e28e82fa9
# ba68a5eb30484d1ca76c23fc9bc74a09
# 3dec4fac4a1446248f59d4ba0fe33666
# afabe87fc2fc4de1bf89a7643d99ed17
# 9d72e437059c43b39a0369449b50ce08
# 58c6f2db6cff4dc49e7412bb20e7a01a
# 23eee839c1c34752ac8eab15d0029064
# 498838fb8fe040329abb978aea99f2be
#: ../../networking2.rst:3933 ../../networking2.rst:4405 ../../networking2.rst:4505
#: ../../networking2.rst:4697 ../../networking2.rst:5301 ../../networking2.rst:5560
#: ../../networking2.rst:5886 ../../networking2.rst:5973 ../../networking2.rst:6065
#: ../../networking2.rst:6308 ../../networking2.rst:6702
msgid "The following router information is displayed:"
msgstr ""

# c26c1853bc4f4277b2210032d9fb8c71
# 0139a8b25d624810bd6bd843f489005e
# 1a93bacd56834a9a8b5b28a8a7860331
# 37f0f96d9ff840e2bc3edfce09290220
# 361aba2c5dde45f78980a4afef525afe
# c0a4cfa4e5fe4cc5a0ad6e9b742ba56c
# 77a0686377bb4665b5d5069fb6b3ce35
# 0a570734113f4de18e33b19bcf20dc8c
# f55e6f457a684df2b425513b5ebb8f84
# e04ebd7737dc4c5d905b4a2e898dd1dd
# dac82df8dc6e4aeb9f668a0fce3839f7
#: ../../networking2.rst:3937 ../../networking2.rst:4409 ../../networking2.rst:4509
#: ../../networking2.rst:4701 ../../networking2.rst:5305 ../../networking2.rst:5564
#: ../../networking2.rst:5890 ../../networking2.rst:5977 ../../networking2.rst:6069
#: ../../networking2.rst:6312 ../../networking2.rst:6706
msgid "Private Gateways"
msgstr "Passerelles privées"

# a9e24dfd29a3416d90e3051d7adbfd22
# f868061634e14c84ad71294278a83859
# 48ca230e37f745998e82d810cac0601f
# 7e3d042b215f496eadd246802bc8d222
# 5ff70875c6a34da991576fa2cb6c9383
# e3012be55eb74fcf88d4ef4e6b761efd
# e3050c23e81b4d149d94857d393c88e2
# ddae1748531d48bbbdd4d197c05796fb
# efeffe0be53f4e16a0484bfa29446228
# 0b41ea343fdd486c8076aafd64b39af0
# f3c278d0a4e1481da2d1684a5128a925
#: ../../networking2.rst:3941 ../../networking2.rst:4413 ../../networking2.rst:4513
#: ../../networking2.rst:4705 ../../networking2.rst:5309 ../../networking2.rst:5568
#: ../../networking2.rst:5894 ../../networking2.rst:5981 ../../networking2.rst:6073
#: ../../networking2.rst:6316 ../../networking2.rst:6710
msgid "Public IP Addresses"
msgstr "Adresses IP publiques"

# 2e72f864a49742349a9ac3443b812ace
# 34ef012f20b144bd90ebf24e0b12b44a
# 5913d2bdbb4a4e53a3ac3b0298e92e49
# 40012c7aa1ee4262bd10d91b96e8a9c9
# 6f57a5bdf67e4cb58990f4d008083823
# 853f28cafe0a4fc2891f7fabaae17a63
# 3e495712a7e54c939d916fc98129d091
# e3f120e5aaaf463c8ecc396d8abbd9d5
# 97c98429541c4be592183749d007886c
# 7a721c1ac43b4854b117cbce3eb74212
# f91d27b21a40457eafd937a34be8e496
#: ../../networking2.rst:3945 ../../networking2.rst:4417 ../../networking2.rst:4517
#: ../../networking2.rst:4709 ../../networking2.rst:5313 ../../networking2.rst:5572
#: ../../networking2.rst:5898 ../../networking2.rst:5985 ../../networking2.rst:6077
#: ../../networking2.rst:6320 ../../networking2.rst:6714
msgid "Site-to-Site VPNs"
msgstr ""

# 349f95fa06f64797aff0edd3c925735e
# 38e399fbd60f4bf5bf7ed82ae8ca8e0a
# 5a4c91418b0a4ff99bb9831c5d46345b
# 4f3ed50fa2084beab6f50bf893480074
# 1e5d1d73bc104f34bcd1a3323e0735ef
# 1191bcc81f424ae0b9582151a69b7c74
# f62a78e753f344e1a9aa50099eea6317
# b7b2d9ae13c340259dc2ccd54fd143d4
# c450b0235bc74c36970ffde3fc943e02
# 6e50d4714233432ca68b491f4d81721f
# 86a0e3bd6be54e0a883c965b6aa369c8
#: ../../networking2.rst:3949 ../../networking2.rst:4421 ../../networking2.rst:4521
#: ../../networking2.rst:4713 ../../networking2.rst:5317 ../../networking2.rst:5576
#: ../../networking2.rst:5902 ../../networking2.rst:5989 ../../networking2.rst:6081
#: ../../networking2.rst:6324 ../../networking2.rst:6718
msgid "Network ACL Lists"
msgstr "Listes d'ACL réseau"

# 4ea069860ba74bfdbaa2253dec4c494b
# 13c12d90b1e84f96ad76cba5a47982c5
# c218f564b23b41ea9e5193fb707b10fc
# 82b5209e8daf48ef940f3188b13d1773
#: ../../networking2.rst:3953 ../../networking2.rst:6085 ../../networking2.rst:6328
#: ../../networking2.rst:6722
msgid "In the Router node, select Public IP Addresses."
msgstr ""

# ba7c1886ce2f4ee2b912e553ebc3d61b
# 0bfc7d4f8b8342789c24f18c3050712e
# 580ba0ab2bca4c888e0a88e20bdbea27
# d809889924b44274b70abfc5c5e45700
# 25e20e9a574348cdaa22b580e2eda1e7
#: ../../networking2.rst:3955 ../../networking2.rst:5995 ../../networking2.rst:6087
#: ../../networking2.rst:6330 ../../networking2.rst:6724
msgid "The IP Addresses page is displayed."
msgstr "La page des adresses IP est affichée."

# b79d01255d3242b2bca0f5b82a3f42a7
#: ../../networking2.rst:3959
msgid "Click Source NAT IP address."
msgstr ""

# 124e19bc247541509add9967859dbd05
#: ../../networking2.rst:3965
msgid "Click OK to confirm. The IPsec key is displayed in a pop-up window."
msgstr ""

# d67e0d11d2a84def84932c99310a36fc
#: ../../networking2.rst:3967
msgid "Now, you need to add the VPN users."
msgstr ""

# b4de336c841f4553b07b5e167ffa4d21
#: ../../networking2.rst:3971
msgid "Click the Source NAT IP."
msgstr ""

# 4d3e59a6636142a4b87a1bc3e1114a0b
#: ../../networking2.rst:3975
msgid "Select the VPN tab."
msgstr ""

# 27ab772233bc45b3926b22bfac64318c
#: ../../networking2.rst:3979
msgid ""
"Add the username and the corresponding password of the user you wanted to add."
msgstr ""

# 389210e40ce143f7a96d6c93a81f9f34
#: ../../networking2.rst:3988
msgid "Repeat the same steps to add the VPN users."
msgstr ""

# b3ada11c846b4cd9a7ea6de9608b48ed
#: ../../networking2.rst:3991
msgid "Using Remote Access VPN with Windows"
msgstr ""

# 4dacd242f3fc46b58f15b96d910b2a54
#: ../../networking2.rst:3993
msgid ""
"The procedure to use VPN varies by Windows version. Generally, the user must "
"edit the VPN properties and make sure that the default route is not the VPN. The "
"following steps are for Windows L2TP clients on Windows Vista. The commands "
"should be similar for other Windows versions."
msgstr ""

# e7a57a9061b640579542551d1c1a0a6a
#: ../../networking2.rst:4000
msgid ""
"Log in to the CloudStack UI and click on the source NAT IP for the account. The "
"VPN tab should display the IPsec preshared key. Make a note of this and the "
"source NAT IP. The UI also lists one or more users and their passwords. Choose "
"one of these users, or, if none exists, add a user and password."
msgstr ""

# d1fc77ea9ff74b79be7e81efd85d177a
#: ../../networking2.rst:4008
msgid ""
"On the Windows box, go to Control Panel, then select Network and Sharing center. "
"Click Setup a connection or network."
msgstr ""

# 7e4498aa4e0a4ebdafe3f2dab310a0f6
#: ../../networking2.rst:4013
msgid "In the next dialog, select No, create a new connection."
msgstr ""

# 90e3f9cc2fc740aca1edb2b0edc930f9
#: ../../networking2.rst:4017
msgid "In the next dialog, select Use my Internet Connection (VPN)."
msgstr ""

# 8e80995c739c4114ac013a88f71347e9
#: ../../networking2.rst:4021
msgid ""
"In the next dialog, enter the source NAT IP from step #1 and give the connection "
"a name. Check Don't connect now."
msgstr ""

# 2b3c410c5ec74b4eb6b7d269c04bdfb6
#: ../../networking2.rst:4027
msgid "In the next dialog, enter the user name and password selected in step #1."
msgstr ""

# 56b71e910d734f4b93b857548bcc867d
#: ../../networking2.rst:4036
msgid ""
"Go back to the Control Panel and click Network Connections to see the new "
"connection. The connection is not active yet."
msgstr ""

# 5032581f1fe042c1844ebad881b3d41a
#: ../../networking2.rst:4041
msgid ""
"Right-click the new connection and select Properties. In the Properties dialog, "
"select the Networking tab."
msgstr ""

# 23ee9538e54a49c39f87d22e2a8aae65
#: ../../networking2.rst:4046
msgid ""
"In Type of VPN, choose L2TP IPsec VPN, then click IPsec settings. Select Use "
"preshared key. Enter the preshared key from step #1."
msgstr ""

# e432bdf75f62482ab7522b9a120ab5b1
#: ../../networking2.rst:4051
msgid ""
"The connection is ready for activation. Go back to Control Panel -> Network "
"Connections and double-click the created connection."
msgstr ""

# fd7a739563464507bd2c37c2ad54953c
#: ../../networking2.rst:4056
msgid "Enter the user name and password from step #1."
msgstr ""

# aebae91f3d7c45eb9f3dd5fa89388da5
#: ../../networking2.rst:4059
msgid "Using Remote Access VPN with Mac OS X"
msgstr ""

# 580e45aef47e4d37846427f1b651a7e2
#: ../../networking2.rst:4061
msgid ""
"First, be sure you've configured the VPN settings in your CloudStack install. "
"This section is only concerned with connecting via Mac OS X to your VPN."
msgstr ""

# 093bbd04cdab4e429fd3a568f011382f
#: ../../networking2.rst:4065
msgid ""
"Note, these instructions were written on Mac OS X 10.7.5. They may differ "
"slightly in older or newer releases of Mac OS X."
msgstr ""

# 50d800b2cf72450f8bd890270e0e0ee6
#: ../../networking2.rst:4070
msgid "On your Mac, open System Preferences and click Network."
msgstr ""

# 3a1af061748d4e418eaaf8b5f8877f09
#: ../../networking2.rst:4074
msgid "Make sure Send all traffic over VPN connection is not checked."
msgstr ""

# ef3e10026dbb4d1798d2133b3e9c22dd
#: ../../networking2.rst:4078
msgid ""
"If your preferences are locked, you'll need to click the lock in the bottom left-"
"hand corner to make any changes and provide your administrator credentials."
msgstr ""

# 292ec3cfa46e48a9a541875456694b77
#: ../../networking2.rst:4084
msgid ""
"You will need to create a new network entry. Click the plus icon on the bottom "
"left-hand side and you'll see a dialog that says \"Select the interface and "
"enter a name for the new service.\" Select VPN from the Interface drop-down "
"menu, and \"L2TP over IPSec\" for the VPN Type. Enter whatever you like within "
"the \"Service Name\" field."
msgstr ""

# 164c5574c52f41baabcf85d8a575f7fa
#: ../../networking2.rst:4092
msgid ""
"You'll now have a new network interface with the name of whatever you put in the "
"\"Service Name\" field. For the purposes of this example, we'll assume you've "
"named it \"CloudStack.\" Click on that interface and provide the IP address of "
"the interface for your VPN under the Server Address field, and the user name for "
"your VPN under Account Name."
msgstr ""

# 581debc7245446b48e5e1c54984c711d
#: ../../networking2.rst:4101
msgid ""
"Click Authentication Settings, and add the user's password under User "
"Authentication and enter the pre-shared IPSec key in the Shared Secret field "
"under Machine Authentication. Click OK."
msgstr ""

# 37bca241509a4e3198b5a084939f14e5
#: ../../networking2.rst:4107
msgid ""
"You may also want to click the \"Show VPN status in menu bar\" but that's "
"entirely optional."
msgstr ""

# 0cb9849a0685438b81bdcd0818eb6202
#: ../../networking2.rst:4112
msgid "Now click \"Connect\" and you will be connected to the CloudStack VPN."
msgstr ""

# 3bac353e80464ab9856af6e4cd87363e
#: ../../networking2.rst:4117
msgid "Setting Up a Site-to-Site VPN Connection"
msgstr ""

# 38ff1a3ce4164fa994abfc693aeaffec
#: ../../networking2.rst:4119
msgid ""
"A Site-to-Site VPN connection helps you establish a secure connection from an "
"enterprise datacenter to the cloud infrastructure. This allows users to access "
"the guest VMs by establishing a VPN connection to the virtual router of the "
"account from a device in the datacenter of the enterprise. You can also "
"establish a secure connection between two VPC setups or high availability zones "
"in your environment. Having this facility eliminates the need to establish VPN "
"connections to individual VMs."
msgstr ""

# bcd63d9bd1044fcd99b0164249abc73b
#: ../../networking2.rst:4128
msgid ""
"The difference from Remote VPN is that Site-to-site VPNs connects entire "
"networks to each other, for example, connecting a branch office network to a "
"company headquarters network. In a site-to-site VPN, hosts do not have VPN "
"client software; they send and receive normal TCP/IP traffic through a VPN "
"gateway."
msgstr ""

# 00b0a4bc2c4642a1844c93fbefe3d0d4
#: ../../networking2.rst:4134
msgid "The supported endpoints on the remote datacenters are:"
msgstr ""

# 39b1debdf4a34a63a316d90993e9826d
#: ../../networking2.rst:4138
msgid "Cisco ISR with IOS 12.4 or later"
msgstr ""

# e913039ba6aa428892f596416afe8630
#: ../../networking2.rst:4142
msgid "Juniper J-Series routers with JunOS 9.5 or later"
msgstr ""

# 2e26cd40d2ed445d8929a3a0c02a5751
#: ../../networking2.rst:4146
msgid "CloudStack virtual routers"
msgstr ""

# 049e25279dbc416c937b6fecf03e8e08
#: ../../networking2.rst:4149
msgid ""
"In addition to the specific Cisco and Juniper devices listed above, the "
"expectation is that any Cisco or Juniper device running on the supported "
"operating systems are able to establish VPN connections."
msgstr ""

# e3328079c0ec42049907920ee99daf6e
#: ../../networking2.rst:4153
msgid "To set up a Site-to-Site VPN connection, perform the following:"
msgstr ""

# 29a806dda94c425ab905caa5f7709805
#: ../../networking2.rst:4157
msgid "Create a Virtual Private Cloud (VPC)."
msgstr ""

# 7adc784ea1124f6f8fca7553c17ca916
#: ../../networking2.rst:4159
msgid "See \":ref:`configuring-vpc`\"."
msgstr "Voir \":ref:`configuring-vpc`\"."

# 9649c39af37946ccbc1cba0e6b044fda
#: ../../networking2.rst:4163
msgid "Create a VPN Customer Gateway."
msgstr ""

# 27873ddb52d14bef9f93d4c83fc88464
#: ../../networking2.rst:4167
msgid "Create a VPN gateway for the VPC that you created."
msgstr ""

# 43ca7677d7b844209b1c70d588741934
#: ../../networking2.rst:4171
msgid "Create VPN connection from the VPC VPN gateway to the customer VPN gateway."
msgstr ""

# 232821d4f81947f1885a8e8355905d9d
#: ../../networking2.rst:4175
msgid "Creating and Updating a VPN Customer Gateway"
msgstr ""

# e0e6f58531f24a02852eb092cba35ff8
#: ../../networking2.rst:4178
msgid "A VPN customer gateway can be connected to only one VPN gateway at a time."
msgstr ""

# 95d554ca702946bca83b30c6adf6a445
#: ../../networking2.rst:4180
msgid "To add a VPN Customer Gateway:"
msgstr ""

# 46009b4629e8480591e1052e0a368962
# d92d044f9c1f417cb5166046b62ef99a
#: ../../networking2.rst:4192 ../../networking2.rst:4337
msgid "In the Select view, select VPN Customer Gateway."
msgstr ""

# 5b578ba46d8f4757aaf5620e6f77b1dc
#: ../../networking2.rst:4196
msgid "Click Add VPN Customer Gateway."
msgstr ""

# c3fa00baefd74a0eab971c38b2e19251
#: ../../networking2.rst:4198
msgid "|addvpncustomergateway.png|"
msgstr "|addvpncustomergateway.png|"

# fd022a19e85d42918e285828af4c3698
#: ../../networking2.rst:4204
msgid "**Name**: A unique name for the VPN customer gateway you create."
msgstr ""

# 33ddd28d37da46f38c17f701efbd46d1
#: ../../networking2.rst:4208
msgid "**Gateway**: The IP address for the remote gateway."
msgstr ""

# a29af3f7a7934e4d88f2cd38dd8f70a1
#: ../../networking2.rst:4212
msgid ""
"**CIDR list**: The guest CIDR list of the remote subnets. Enter a CIDR or a "
"comma-separated list of CIDRs. Ensure that a guest CIDR list is not overlapped "
"with the VPC's CIDR, or another guest CIDR. The CIDR must be RFC1918-compliant."
msgstr ""

# 4fdaac9ee4004de68ddbea33d37d1e43
#: ../../networking2.rst:4219
msgid ""
"**IPsec Preshared Key**: Preshared keying is a method where the endpoints of the "
"VPN share a secret key. This key value is used to authenticate the customer "
"gateway and the VPC VPN gateway to each other."
msgstr ""

# 05946c6fb7bd4305bb2e20af004a01e3
#: ../../networking2.rst:4225
msgid ""
"The IKE peers (VPN end points) authenticate each other by computing and sending "
"a keyed hash of data that includes the Preshared key. If the receiving peer is "
"able to create the same hash independently by using its Preshared key, it knows "
"that both peers must share the same secret, thus authenticating the customer "
"gateway."
msgstr ""

# b56b82f20e33400d8c4b39ce0b55bab2
#: ../../networking2.rst:4234
msgid ""
"**IKE Encryption**: The Internet Key Exchange (IKE) policy for phase-1. The "
"supported encryption algorithms are AES128, AES192, AES256, and 3DES. "
"Authentication is accomplished through the Preshared Keys."
msgstr ""

# bd7c468509ca4ad5840e115efaa7e1ca
#: ../../networking2.rst:4240
msgid ""
"The phase-1 is the first phase in the IKE process. In this initial negotiation "
"phase, the two VPN endpoints agree on the methods to be used to provide security "
"for the underlying IP traffic. The phase-1 authenticates the two VPN gateways to "
"each other, by confirming that the remote gateway has a matching Preshared Key."
msgstr ""

# 13e9c659a1764d4fba7fc6de838ff8b1
#: ../../networking2.rst:4248
msgid ""
"**IKE Hash**: The IKE hash for phase-1. The supported hash algorithms are SHA1 "
"and MD5."
msgstr ""

# 23efa859bff14bc69f132fda62399cbe
#: ../../networking2.rst:4253
msgid ""
"**IKE DH**: A public-key cryptography protocol which allows two parties to "
"establish a shared secret over an insecure communications channel. The 1536-bit "
"Diffie-Hellman group is used within IKE to establish session keys. The supported "
"options are None, Group-5 (1536-bit) and Group-2 (1024-bit)."
msgstr ""

# 208ddb7be762449e9a6bb569f815f0ed
#: ../../networking2.rst:4261
msgid ""
"**ESP Encryption**: Encapsulating Security Payload (ESP) algorithm within "
"phase-2. The supported encryption algorithms are AES128, AES192, AES256, and "
"3DES."
msgstr ""

# b5dd17cc99c744d39b800b3df090e674
#: ../../networking2.rst:4266
msgid ""
"The phase-2 is the second phase in the IKE process. The purpose of IKE phase-2 "
"is to negotiate IPSec security associations (SA) to set up the IPSec tunnel. In "
"phase-2, new keying material is extracted from the Diffie-Hellman key exchange "
"in phase-1, to provide session keys to use in protecting the VPN data flow."
msgstr ""

# 0b0d1207149646f7b20a26a97a43f2d2
#: ../../networking2.rst:4274
msgid ""
"**ESP Hash**: Encapsulating Security Payload (ESP) hash for phase-2. Supported "
"hash algorithms are SHA1 and MD5."
msgstr ""

# 24ada2be8386490aafda31663e439f6f
#: ../../networking2.rst:4279
msgid ""
"**Perfect Forward Secrecy**: Perfect Forward Secrecy (or PFS) is the property "
"that ensures that a session key derived from a set of long-term public and "
"private keys will not be compromised. This property enforces a new Diffie-"
"Hellman key exchange. It provides the keying material that has greater key "
"material life and thereby greater resistance to cryptographic attacks. The "
"available options are None, Group-5 (1536-bit) and Group-2 (1024-bit). The "
"security of the key exchanges increase as the DH groups grow larger, as does the "
"time of the exchanges."
msgstr ""

# 7070c64276df4df0bf10b79718192550
#: ../../networking2.rst:4290
msgid ""
"When PFS is turned on, for every negotiation of a new phase-2 SA the two "
"gateways must generate a new set of phase-1 keys. This adds an extra layer of "
"protection that PFS adds, which ensures if the phase-2 SA's have expired, the "
"keys used for new phase-2 SA's have not been generated from the current phase-1 "
"keying material."
msgstr ""

# 2ca89467ccc94df5a7bef6468f566b46
#: ../../networking2.rst:4298
msgid ""
"**IKE Lifetime (seconds)**: The phase-1 lifetime of the security association in "
"seconds. Default is 86400 seconds (1 day). Whenever the time expires, a new "
"phase-1 exchange is performed."
msgstr ""

# 8ca35ecaf59e42cfbef7fe98bfd8f264
#: ../../networking2.rst:4304
msgid ""
"**ESP Lifetime (seconds)**: The phase-2 lifetime of the security association in "
"seconds. Default is 3600 seconds (1 hour). Whenever the value is exceeded, a re-"
"key is initiated to provide a new IPsec encryption and authentication session "
"keys."
msgstr ""

# f5df9d75cd524b5b92d8c85cce626655
#: ../../networking2.rst:4311
msgid ""
"**Dead Peer Detection**: A method to detect an unavailable Internet Key Exchange "
"(IKE) peer. Select this option if you want the virtual router to query the "
"liveliness of its IKE peer at regular intervals. It's recommended to have the "
"same configuration of DPD on both side of VPN connection."
msgstr ""

# d5d1124c4e124407a611667296f6ffac
#: ../../networking2.rst:4322
msgid "Updating and Removing a VPN Customer Gateway"
msgstr ""

# 04bbad214e7c4a6884dbfa7b6367b57d
#: ../../networking2.rst:4324
msgid ""
"You can update a customer gateway either with no VPN connection, or related VPN "
"connection is in error state."
msgstr ""

# 1ab9886431a14731ae0c50e12a2203d6
#: ../../networking2.rst:4341
msgid "Select the VPN customer gateway you want to work with."
msgstr ""

# ba453f5b81544287922dde81efcc590b
#: ../../networking2.rst:4345
msgid ""
"To modify the required parameters, click the Edit VPN Customer Gateway button |"
"edit-icon.png|"
msgstr ""

# 46a97e97cc034e4e91727e4f784cc8b7
#: ../../networking2.rst:4350
msgid ""
"To remove the VPN customer gateway, click the Delete VPN Customer Gateway button "
"|delete.png|"
msgstr ""

# 60adfabe1723470599d91c8c7e4d173a
#: ../../networking2.rst:4358
msgid "Creating a VPN gateway for the VPC"
msgstr ""

# 3500ca75a83147c19f1ed28777444c7d
# a64efaea89b24d67a8e4d1e4d36d34eb
# ce5b35fdd4964dd398d49233e31b5fcd
# 67bc60dd8b6046558a097762240decf1
# 6c5213a6e5524a83bd5c41c59f290442
# f25b37649f5d4cd5b04a737641c79d73
# 5b21b4e1cb1045269d9814e3cc029bd0
#: ../../networking2.rst:4377 ../../networking2.rst:4473 ../../networking2.rst:4665
#: ../../networking2.rst:5767 ../../networking2.rst:5858 ../../networking2.rst:6037
#: ../../networking2.rst:6674
msgid "Click the Configure button of the VPC to which you want to deploy the VMs."
msgstr ""

# e1358ecd8ab54314873c0775c0880f75
# 19d3fa0227e84261bf1cd4663828636e
# 4de39a3991db4dfc901c6279c5294ac2
# 1a2f3ce6a491468ab7a3459fcdfe215a
# 469af671796348f5b92558710d159c36
# c11ffe7f7c0949189706c0df2f2ff581
# 94a0dea0d2b04ba797bfe1f2164cac7b
# 30b175b156724a81b03bd2d42e85a0a1
#: ../../networking2.rst:4380 ../../networking2.rst:4476 ../../networking2.rst:4668
#: ../../networking2.rst:5531 ../../networking2.rst:5861 ../../networking2.rst:5948
#: ../../networking2.rst:6040 ../../networking2.rst:6677
msgid ""
"The VPC page is displayed where all the tiers you created are listed in a "
"diagram."
msgstr ""

# 795d87a7e4884bc9954978635c4a0ce3
# bfc77b95ba024e828af5e01a0235044f
# c412e8677d9f43bd91d874297d2a51b1
#: ../../networking2.rst:4425 ../../networking2.rst:4525 ../../networking2.rst:4717
msgid "Select Site-to-Site VPN."
msgstr ""

# 8284273706754d38a31bf76d8261f3ed
#: ../../networking2.rst:4427
msgid ""
"If you are creating the VPN gateway for the first time, selecting Site-to-Site "
"VPN prompts you to create a VPN gateway."
msgstr ""

# 9403ca5a182a46bea09047c00af73183
#: ../../networking2.rst:4432
msgid "In the confirmation dialog, click Yes to confirm."
msgstr ""

# e4ae30f09bbb4771b8c6f422926370fd
#: ../../networking2.rst:4434
msgid ""
"Within a few moments, the VPN gateway is created. You will be prompted to view "
"the details of the VPN gateway you have created. Click Yes to confirm."
msgstr ""

# 92509e2b8fd34d06a5026dc84df93572
#: ../../networking2.rst:4438
msgid "The following details are displayed in the VPN Gateway page:"
msgstr ""

# 0d9b83c3c7c14ceb89902aa2acd77eef
#: ../../networking2.rst:4446
msgid "Account"
msgstr "Compte"

# de092a05c0cb4352a757a99ec8ec10cc
#: ../../networking2.rst:4450
msgid "Domain"
msgstr "Domaine"

# f9de76d1de924804aada31d4d335a636
#: ../../networking2.rst:4453
msgid "Creating a VPN Connection"
msgstr ""

# 041a061561c240feb48418d06b345f9d
#: ../../networking2.rst:4455
msgid "CloudStack supports creating up to 8 VPN connections."
msgstr ""

# c343d040bbf94652805f9913087df284
#: ../../networking2.rst:4469
msgid "All the VPCs that you create for the account are listed in the page."
msgstr "Tous les VPC que vous avez créé pour ce compte sont listés dans la page."

# 6ab7b79bc9384d7e80adc871af997847
# 49acb49a732346378816e6bb92cf285d
# 02fa5743f59b45619d573323e28ba038
#: ../../networking2.rst:4481 ../../networking2.rst:4673 ../../networking2.rst:5536
msgid "Click the Settings icon."
msgstr "Cliquer sur l'icône Paramètres."

# fc6f5140f3c942dca23fcfd1ab68c6a7
# 51c44ccda83c4464a1e80005c54790fc
#: ../../networking2.rst:4527 ../../networking2.rst:4719
msgid "The Site-to-Site VPN page is displayed."
msgstr ""

# 786eac580afe4c91a9f86515ed758789
# 17b40c7b7853452ea96b30e63059db2c
#: ../../networking2.rst:4531 ../../networking2.rst:4723
msgid "From the Select View drop-down, ensure that VPN Connection is selected."
msgstr ""

# 163923e5fc7e45a9b9022496845d5da4
#: ../../networking2.rst:4536
msgid "Click Create VPN Connection."
msgstr ""

# 3755699dc4ef4c60846d045f671bfcee
#: ../../networking2.rst:4538
msgid "The Create VPN Connection dialog is displayed:"
msgstr ""

# 63e805ab6ce6420d97103dc7a20b5506
#: ../../networking2.rst:4540
msgid "|createvpnconnection.png|"
msgstr "|createvpnconnection.png|"

# e897f05865fe4bf3b6daee5504dcf357
#: ../../networking2.rst:4544
msgid "Select the desired customer gateway."
msgstr ""

# cc72f3e20e344c9f8e3202d92866c9ce
#: ../../networking2.rst:4548
msgid ""
"Select Passive if you want to establish a connection between two VPC virtual "
"routers."
msgstr ""

# b1e77d6e88094abc8f1efc7fc737c62a
#: ../../networking2.rst:4551
msgid ""
"If you want to establish a connection between two VPC virtual routers, select "
"Passive only on one of the VPC virtual routers, which waits for the other VPC "
"virtual router to initiate the connection. Do not select Passive on the VPC "
"virtual router that initiates the connection."
msgstr ""

# e81cf6ee9dbe4cf8a512334ae708d8e0
#: ../../networking2.rst:4561
msgid "Within a few moments, the VPN Connection is displayed."
msgstr ""

# ceccd67800e84c5f86872fc8697f97d5
#: ../../networking2.rst:4563
msgid "The following information on the VPN connection is displayed:"
msgstr ""

# d7d71c18469c485d9cf0c62d4e18ee44
#: ../../networking2.rst:4575
msgid "State"
msgstr "Etat"

# 7e17d8eed6e64a6bb98dfcc6688f7011
#: ../../networking2.rst:4579
msgid "IPSec Preshared Key"
msgstr ""

# 7698868ecfe742709ac2201b3c176a62
#: ../../networking2.rst:4583
msgid "IKE Policy"
msgstr ""

# f8b615756067468c82c8cc29bd97d4f6
#: ../../networking2.rst:4587
msgid "ESP Policy"
msgstr ""

# 2885f5a0b00e4f45bac61fa489576241
#: ../../networking2.rst:4590
msgid "Site-to-Site VPN Connection Between VPC Networks"
msgstr ""

# cffe70c20ec8443a93e09b3c742a055b
#: ../../networking2.rst:4592
msgid ""
"CloudStack provides you with the ability to establish a site-to-site VPN "
"connection between CloudStack virtual routers. To achieve that, add a passive "
"mode Site-to-Site VPN. With this functionality, users can deploy applications in "
"multiple Availability Zones or VPCs, which can communicate with each other by "
"using a secure Site-to-Site VPN Tunnel."
msgstr ""

# 1a50c272367a482fb9fb4939f3e4baa1
#: ../../networking2.rst:4598
msgid "This feature is supported on all the hypervisors."
msgstr ""

# 2f0c1484f8594418b1f21b468680914a
#: ../../networking2.rst:4602
msgid "Create two VPCs. For example, VPC A and VPC B."
msgstr ""

# 2db40aa80b84423f9d304bb0b3745676
#: ../../networking2.rst:4604
msgid "For more information, see \":ref:`configuring-vpc`\"."
msgstr ""

# 8cbc2e0b316a42489765523577ab7e6a
#: ../../networking2.rst:4608
msgid "Create VPN gateways on both the VPCs you created."
msgstr ""

# c68bd6435db949d791a0372688848f1a
#: ../../networking2.rst:4610
msgid ""
"For more information, see `\"Creating a VPN gateway for the VPC\" <#creating-a-"
"vpn-gateway-for-the-vpc>`_."
msgstr ""

# f8b154e601404d4abdd3a9a4e6374500
#: ../../networking2.rst:4615
msgid "Create VPN customer gateway for both the VPCs."
msgstr ""

# 7e4fb977595840019e437c0884f0a8f1
#: ../../networking2.rst:4617
msgid ""
"For more information, see `\"Creating and Updating a VPN Customer Gateway\" "
"<#creating-and-updating-a-vpn-customer-gateway>`_."
msgstr ""

# ade608d3a3ea45829af36e650cd98e47
#: ../../networking2.rst:4622
msgid "Enable a VPN connection on VPC A in passive mode."
msgstr ""

# 7a5159ba5d354f659fa0b9c6291f9413
#: ../../networking2.rst:4624
msgid ""
"For more information, see `\"Creating a VPN Connection\" <#creating-a-vpn-"
"connection>`_."
msgstr ""

# 17674753d913496ea042cb7c2039383f
#: ../../networking2.rst:4627
msgid ""
"Ensure that the customer gateway is pointed to VPC B. The VPN connection is "
"shown in the Disconnected state."
msgstr ""

# d8feab6deab8404a9912bb7ea7882511
#: ../../networking2.rst:4632
msgid "Enable a VPN connection on VPC B."
msgstr ""

# 9234f47ff9fb4a4a86a85bcc6d518287
#: ../../networking2.rst:4634
msgid ""
"Ensure that the customer gateway is pointed to VPC A. Because virtual router of "
"VPC A, in this case, is in passive mode and is waiting for the virtual router of "
"VPC B to initiate the connection, VPC B virtual router should not be in passive "
"mode."
msgstr ""

# 85d2c38cd2d0427a833207d6c3b42087
#: ../../networking2.rst:4639
msgid "The VPN connection is shown in the Disconnected state."
msgstr ""

# 6a7541ea6fa1406eacf4db796e79ef64
#: ../../networking2.rst:4641
msgid ""
"Creating VPN connection on both the VPCs initiates a VPN connection. Wait for "
"few seconds. The default is 30 seconds for both the VPN connections to show the "
"Connected state."
msgstr ""

# 894d44a883c248778d9598ba46e3f27f
#: ../../networking2.rst:4646
msgid "Restarting and Removing a VPN Connection"
msgstr ""

# 83fe3a90f3094225aecb250153297a3d
#: ../../networking2.rst:4726
msgid "All the VPN connections you created are displayed."
msgstr ""

# b94b1fdaf1c844a28ccf4863998d8635
#: ../../networking2.rst:4730
msgid "Select the VPN connection you want to work with."
msgstr ""

# a9f2559596ff44e281d29137f23566ef
#: ../../networking2.rst:4732
msgid "The Details tab is displayed."
msgstr ""

# a233c3b9788d41f38eb802e1f9d989c9
#: ../../networking2.rst:4736
msgid ""
"To remove a VPN connection, click the Delete VPN connection button |remove-vpn."
"png|"
msgstr ""

# 41b780de0b934756a92a9ca0269e75e5
#: ../../networking2.rst:4739
msgid ""
"To restart a VPN connection, click the Reset VPN connection button present in "
"the Details tab. |reset-vpn.png|"
msgstr ""

# 183bb10ab504444faae13d81f2319f23
#: ../../networking2.rst:4743
msgid "About Inter-VLAN Routing (nTier Apps)"
msgstr "A propos du routage Inter-VLAN (Applications NTiers)"

# 13ccb675390f4150acd57078694a88dd
#: ../../networking2.rst:4745
msgid ""
"Inter-VLAN Routing (nTier Apps) is the capability to route network traffic "
"between VLANs. This feature enables you to build Virtual Private Clouds (VPC), "
"an isolated segment of your cloud, that can hold multi-tier applications. These "
"tiers are deployed on different VLANs that can communicate with each other. You "
"provision VLANs to the tiers your create, and VMs can be deployed on different "
"tiers. The VLANs are connected to a virtual router, which facilitates "
"communication between the VMs. In effect, you can segment VMs by means of VLANs "
"into different networks that can host multi-tier applications, such as Web, "
"Application, or Database. Such segmentation by means of VLANs logically separate "
"application VMs for higher security and lower broadcasts, while remaining "
"physically connected to the same device."
msgstr ""
"Le routage Inter-VLAN (Applications nTiers) est la capacité de router le réseau "
"entre les VLANs. Cette fonctionnalité vous permet de bâtir des Clouds Privés "
"Virtuels (VPC), un segment isolé de votre cloud, qui peut contenir des "
"applications multi-tier. Ces tiers sont déployés sur des différents VLANs qui "
"peuvent communiquer avec les uns les autres. Vous provisionnez les VLANs aux "
"tiers que vous créez, et les VMs peuvent être déployées sur différents tiers. "
"Les VLANs sont connectés à un routeur virtuel, ce qui facilite la communication "
"entre les VMs. En effet, vous pouvez segmenter les VMs au moyen de VLANs en "
"différents réseaux qui peuvent accueillir des applications multi-tier, comme le "
"Web, l'Application ou la base de données. Une telle segmentation au moyen de "
"VLANs sépare les VMs de l'application logiquement pour plus de sécurité et pour "
"des domaines de broadcasts réduit, alors qu'elles restent connectées "
"physiquement au même périphérique."

# 8e00b9f53dfe4448b8fe2664f0725c1e
#: ../../networking2.rst:4758
msgid "This feature is supported on XenServer, KVM, and VMware hypervisors."
msgstr ""
"Cette fonctionnalité est supportée sur les hyperviseurs XenServer, KVM et VMware."

# cf6ee1a9b0f24cf2b239f5c5ee3e1ccb
#: ../../networking2.rst:4760
msgid "The major advantages are:"
msgstr "Les avantages majeurs sont :"

# 9914db80271c45879b3763424ebbbe4e
#: ../../networking2.rst:4764
msgid ""
"The administrator can deploy a set of VLANs and allow users to deploy VMs on "
"these VLANs. A guest VLAN is randomly alloted to an account from a pre-specified "
"set of guest VLANs. All the VMs of a certain tier of an account reside on the "
"guest VLAN allotted to that account."
msgstr ""
"L'administrateur peut déployer un ensemble de VLAN et permettre aux utilisateurs "
"de déployer des VM sur ces VLAN. Un VLAN invité est alloué aléatoirement à un "
"compte à partir d'un ensemble prédéfini de VLAN invités. Toutes les machines "
"virtuelles d'un segment spécifique d'un compte résident sur le VLAN invité "
"réservé à ce compte."

# 7c49b6960b3e4fe98267c66963d07a32
#: ../../networking2.rst:4770
msgid "A VLAN allocated for an account cannot be shared between multiple accounts."
msgstr ""
"Un VLAN alloué pour un compte ne peut pas être partagé entre plusieurs comptes."

# 079fa9b5868843beb9ef64f20fd14208
#: ../../networking2.rst:4774
msgid ""
"The administrator can allow users create their own VPC and deploy the "
"application. In this scenario, the VMs that belong to the account are deployed "
"on the VLANs allotted to that account."
msgstr ""
"L'administrateur peut autoriser les utilisateurs à créer leur propre VPC et "
"déployer l'application. Dans ce scénario, les VM qui appartiennent au compte "
"sont déployées sur les VLAN alloués à ce compte."

# cdc5e1a97e7347ed92c034645cf61bb8
#: ../../networking2.rst:4780
msgid ""
"Both administrators and users can create multiple VPCs. The guest network NIC is "
"plugged to the VPC virtual router when the first VM is deployed in a tier."
msgstr ""
"A la fois les administrateurs et les utilisateurs peuvent créer plusieurs VPC. "
"L'interface NIC du réseau invité est connectée au routeur virtuel du VPC lorsque "
"la première VM est déployée dans un segment."

# b939e06705db41289dc97594160ccd4b
#: ../../networking2.rst:4786
msgid ""
"The administrator can create the following gateways to send to or receive "
"traffic from the VMs:"
msgstr ""
"L'administrateur peut créer les passerelles suivantes pour envoyer ou recevoir "
"le trafic depuis les VM :"

# 3f3d39b2a9544b7dbe578450c863c442
#: ../../networking2.rst:4791
msgid ""
"**VPN Gateway**: For more information, see `\"Creating a VPN gateway for the VPC"
"\" <#creating-a-vpn-gateway-for-the-vpc>`_."
msgstr ""
"**Passerelle VPN** : Pour plus d'informations, consultez \"Créer une passerelle "
"VPN pour le VPC\" <#creating-a-vpn-gateway-for-the-vpc>`_."

# 563958c0c69e44a79fb209179e6f5ef8
#: ../../networking2.rst:4796
msgid ""
"**Public Gateway**: The public gateway for a VPC is added to the virtual router "
"when the virtual router is created for VPC. The public gateway is not exposed to "
"the end users. You are not allowed to list it, nor allowed to create any static "
"routes."
msgstr ""
"**Passerelle publique** : La passerelle publique pour le VPC est ajoutée au "
"routeur virtuel lorsque le routeur virtuel est créé pour le VPC. La passerelle "
"publique n'est pas exposée aux utilisateurs finaux. Vous n'êtes pas autorisés à "
"la lister, ni autorisé à créer des routes statiques."

# 1178d5307b4a4df3b4982bb2985004e1
#: ../../networking2.rst:4803
msgid ""
"**Private Gateway**: For more information, see \":ref:`adding-priv-gw-vpc`\"."
msgstr ""
"**Passerelle privée** : Pour plus d'informations consultez \":ref:`adding-priv-"
"gw-vpc`\"."

# c652b274f1d44ceebe3ea04ee8beb31c
#: ../../networking2.rst:4807
msgid ""
"Both administrators and users can create various possible destinations-gateway "
"combinations. However, only one gateway of each type can be used in a deployment."
msgstr ""
"Les administrateurs et les utilisateurs peuvent créer diverses combinaisons "
"possibles de destinations-passerelles. Cependant, une seule passerelle de chaque "
"type peut être utilisée dans un déploiement."

# 5d134a3e16ec432a972f90fb955629c9
#: ../../networking2.rst:4811
msgid "For example:"
msgstr "Par exemple :"

# 47a88da418a64634b2908fb3999fec58
#: ../../networking2.rst:4815
msgid ""
"**VLANs and Public Gateway**: For example, an application is deployed in the "
"cloud, and the Web application VMs communicate with the Internet."
msgstr ""
"**VLAN et Passerelle publique** : Par exemple, une application est déployée dans "
"le cloud, et les VM des serveurs d'applications Web communiquent avec Internet."

# e5054d8177ff4ecd817c1e9b50370893
#: ../../networking2.rst:4821
msgid ""
"**VLANs, VPN Gateway, and Public Gateway**: For example, an application is "
"deployed in the cloud; the Web application VMs communicate with the Internet; "
"and the database VMs communicate with the on-premise devices."
msgstr ""
"**VLAN, passerelle VPN et passerelle publique** : Par exemple, une application "
"est déployée dans le cloud ;  les VM des serveurs d'applications Web "
"communiquent avec Internet ; et les VM de base de données communiquent avec les "
"dispositifs en local."

# 9cf8b80f8da6486e8a190779839a52af
#: ../../networking2.rst:4828
msgid ""
"The administrator can define Network Access Control List (ACL) on the virtual "
"router to filter the traffic among the VLANs or between the Internet and a VLAN. "
"You can define ACL based on CIDR, port range, protocol, type code (if ICMP "
"protocol is selected) and Ingress/Egress type."
msgstr ""
"L'administrateur peut définir la liste de contrôle d'accès réseau (ACL) sur le "
"routeur virtuel pour filtrer le trafic entre les VLAN ou entre Internet et un "
"VLAN. Vous pouvez définir des ACL en fonction du CIDR, de la plage de ports, du "
"protocole, du code de type (si le protocole ICMP est sélectionné) et du type "
"Ingress / Egress."

# f03fcc7d11a24d6d9058d56e0690ee72
#: ../../networking2.rst:4834
msgid ""
"The following figure shows the possible deployment scenarios of a Inter-VLAN "
"setup:"
msgstr ""
"La figure suivante montre les scénarios possibles d'une configuration Inter-"
"VLAN :"

# 8da1d43a48f54d3cadd9a2ab40446452
#: ../../networking2.rst:4837
msgid "|mutltier.png|"
msgstr "|mutltier.png|"

# b5b5c31e4e374e9c80fbb2bb5d5178cd
#: ../../networking2.rst:4839
msgid ""
"To set up a multi-tier Inter-VLAN deployment, see \":ref:`configuring-vpc`\"."
msgstr ""
"Pour configurer un déploiement multi-tiers Inter-VLAN, voir \":ref:`configuring-"
"vpc`\"."

# 019f7c2e7a1c40289e074fc89915b010
#: ../../networking2.rst:4844
msgid "Configuring a Virtual Private Cloud"
msgstr "Configurer un Cloud Privé Virtuel"

# cf430774172c4664b8c8126dc2f8f2a9
#: ../../networking2.rst:4847
msgid "About Virtual Private Clouds"
msgstr "A propos des Clouds Privés Virtuels"

# 06c06ce2f5fe4b2e8a3464b3c4becf6a
#: ../../networking2.rst:4849
msgid ""
"CloudStack Virtual Private Cloud is a private, isolated part of CloudStack. A "
"VPC can have its own virtual network topology that resembles a traditional "
"physical network. You can launch VMs in the virtual network that can have "
"private addresses in the range of your choice, for example: 10.0.0.0/16. You can "
"define network tiers within your VPC network range, which in turn enables you to "
"group similar kinds of instances based on IP address range."
msgstr ""
"Un Cloud Privé Virtuel CloudStack est une partie privée, isolée de CloudStack. "
"Un VPC peut avoir sa propre topologie de réseau virtuel qui ressemble à un "
"réseau physique traditionnel. Vous pouvez lancer des VMs dans le réseau virtuel "
"qui peuvent avoir des adresses privées dans l'intervalle de votre choix, par "
"exemple : 10.10.10.0/16. Vous pouvez définir des parties de réseau dans "
"l'étendue du réseau de votre VPC, permettant le regroupement des types "
"d'instances similaires en fonction de leur intervalle d'adresse IP."

# 46308016994049eb85cdc73e86db616e
#: ../../networking2.rst:4857
msgid ""
"For example, if a VPC has the private range 10.0.0.0/16, its guest networks can "
"have the network ranges 10.0.1.0/24, 10.0.2.0/24, 10.0.3.0/24, and so on."
msgstr ""
"Par exemple, si un VPC dispose de la plage privée d'adresses IP 10.0.0.0/16, ses "
"réseaux invités peuvent être dans les plages réseaux 10.0.1.0/24, 10.0.2.0/24, "
"10.0.3.0/24, etc."

# ef383bc8b7d54a0785f2b4828b5290ee
#: ../../networking2.rst:4862
msgid "Major Components of a VPC:"
msgstr "Composants majeurs d'un VPC"

# b90235f5e79947b7a57dee0d5c08e244
#: ../../networking2.rst:4864
msgid "A VPC is comprised of the following network components:"
msgstr "Un VPC est constitué des composants réseaux suivants :"

# 9a373d73d3ae48309685ddecb2399f89
#: ../../networking2.rst:4868
msgid ""
"**VPC**: A VPC acts as a container for multiple isolated networks that can "
"communicate with each other via its virtual router."
msgstr ""
"**VPC**: Un VPC agit comme un conteneur pour plusieurs réseaux isolés qui "
"peuvent communiquer les uns les autres via son routeur virtuel."

# 4d1cc64429d44838942ce9d9290d09f6
#: ../../networking2.rst:4873
msgid ""
"**Network Tiers**: Each tier acts as an isolated network with its own VLANs and "
"CIDR list, where you can place groups of resources, such as VMs. The tiers are "
"segmented by means of VLANs. The NIC of each tier acts as its gateway."
msgstr ""
"**Segments réseaux** : chaque segment agit comme un réseau isolé avec ses "
"propres VLANs et listes CIDR, dans lequel vous pouvez placer des groupes de "
"ressources, comme des VM. Les segments sont segmentés par l'utilisation des "
"VLANs. L'interface de chaque segment agit comme sa passerelle."

# 4e202e5460e24d838d858dc82fd70fee
#: ../../networking2.rst:4880
msgid ""
"**Virtual Router**: A virtual router is automatically created and started when "
"you create a VPC. The virtual router connect the tiers and direct traffic among "
"the public gateway, the VPN gateways, and the NAT instances. For each tier, a "
"corresponding NIC and IP exist in the virtual router. The virtual router "
"provides DNS and DHCP services through its IP."
msgstr ""
"**Routeur Virtuel** : Un routeur virtuel est automatiquement créé et démarré "
"lorsque vous créez un VPC. Le routeur virtuel connecte les segments et dirige le "
"trafic entre la passerelle publique, les passerelles VPN et les instances NAT. "
"Pour chaque segment, une interface et une IP correspondante existent dans le "
"routeur virtuel. Le routeur virtuel fourni les services DNS et DHCP via ses IP."

# 5620f9a835ae40ac9f844be5648dafad
#: ../../networking2.rst:4889
msgid ""
"**Public Gateway**: The traffic to and from the Internet routed to the VPC "
"through the public gateway. In a VPC, the public gateway is not exposed to the "
"end user; therefore, static routes are not support for the public gateway."
msgstr ""
"**Passerelle publique** : Le trafic vers et provenant d'Internet est routé vers "
"le VPC par la passerelle publique. Dans un VPC, la passerelle publique n'est pas "
"exposée à l'utilisateur final ; en conséquence, les routes statiques ne sont pas "
"supportées pour la passerelle publique."

# c72e1f296d024bf6a636137059d31752
#: ../../networking2.rst:4896
msgid ""
"**Private Gateway**: All the traffic to and from a private network routed to the "
"VPC through the private gateway. For more information, see \":ref:`adding-priv-"
"gw-vpc`\"."
msgstr ""
"**Passerelle privée** : tout le trafic provenant ou à destination d'un réseau "
"privé est routé vers le VPC par la passerelle privée. Pour plus d'information, "
"voir \":ref:`adding-priv-gw-vpc`\"."

# 741b3998454f43bbad3608dd86a74114
#: ../../networking2.rst:4902
msgid "**VPN Gateway**: The VPC side of a VPN connection."
msgstr "**Passerelle VPN** : Le pendant VPC d'une connexion VPN."

# 6487d4f72da84801ae40e38bcb8f7458
#: ../../networking2.rst:4906
msgid ""
"**Site-to-Site VPN Connection**: A hardware-based VPN connection between your "
"VPC and your datacenter, home network, or co-location facility. For more "
"information, see \":ref:`setting-s2s-vpn-conn`\"."
msgstr ""
"**Connexion VPN site-à-site** : Une connexion VPN matérielle entre votre PVC et "
"votre datacenter, votre réseau domestique ou autres installations. Pour plus "
"d'information, voir \":ref:`setting-s2s-vpn-conn`\"."

# d4b8df91ae5d4307835174a0c96640f1
#: ../../networking2.rst:4912
msgid ""
"**Customer Gateway**: The customer side of a VPN Connection. For more "
"information, see `\"Creating and Updating a VPN Customer Gateway\" <#creating-"
"and-updating-a-vpn-customer-gateway>`_."
msgstr ""
"**Passerelle client** : le pendant client d'une connexion VPN. Pour plus "
"d'informations, voir `\"Créer et mettre à jour une passerelle client\" "
"<#creating-and-updating-a-vpn-customer-gateway>`_."

# f97a3ebbcde34d3a82a37aa401487760
#: ../../networking2.rst:4918
msgid ""
"**NAT Instance**: An instance that provides Port Address Translation for "
"instances to access the Internet via the public gateway. For more information, "
"see \":ref:`enabling-disabling-static-nat-on-vpc`\"."
msgstr ""
"**Instance NAT** : Une instance qui fourni la translation de port pour que les "
"instances puissent accéder à Internet via la passerelle publique. Pour plus "
"d'informations, voir \":ref:`enabling-disabling-static-nat-on-vpc`\"."

# 0e9442c446e34500a845a7dff022554d
#: ../../networking2.rst:4924
msgid ""
"**Network ACL**: Network ACL is a group of Network ACL items. Network ACL items "
"are nothing but numbered rules that are evaluated in order, starting with the "
"lowest numbered rule. These rules determine whether traffic is allowed in or out "
"of any tier associated with the network ACL. For more information, see \":ref:"
"`conf-net-acl`\"."
msgstr ""
"**ACL Réseau** : Une ACL réseau est un groupe d'entrées d'ACL réseau. Les "
"entrées d'ACL réseau ne sont rien d'autre qu'un nombre de règles qui sont "
"évaluées dans l'ordre, en commençant par la règle avec le plus petit numéro. Ces "
"règles déterminent si le trafic est autorisé en entrée ou en sortie de n'importe "
"quel segment associé avec l'ACL réseau. Pour plus d'informations, voir \":ref:"
"`conf-net-acl`\"."

# daf38611958e42f7b832673319b348fb
#: ../../networking2.rst:4931
msgid "Network Architecture in a VPC"
msgstr "Architecture Réseau dans un VPC"

# cc60b077b9ff4de19f842b6afab2e62b
#: ../../networking2.rst:4933
msgid ""
"In a VPC, the following four basic options of network architectures are present:"
msgstr ""
"Dans un VPC, les quatres options basiques d'architectures réseaux suivantes sont "
"présentes :"

# f1eb7bb1a38f4dc68def9d12e7a3e178
#: ../../networking2.rst:4938
msgid "VPC with a public gateway only"
msgstr "VPC avec une passerelle publique seulement"

# b0e2f221d7b14320bbc1222a776de41f
#: ../../networking2.rst:4942
msgid "VPC with public and private gateways"
msgstr "VPC avec des passerelles publiques et privées"

# 0994c597eccb4d299d4dc9b107fb9fa7
#: ../../networking2.rst:4946
msgid "VPC with public and private gateways and site-to-site VPN access"
msgstr "VPC avec des passerelles publiques et privées et un accès VPN site à site"

# 870f363e446c47b4b668cb236c51be3b
#: ../../networking2.rst:4950
msgid "VPC with a private gateway only and site-to-site VPN access"
msgstr "VPC avec une passerelle privée seulement et un accès VPN site à site"

# 0875278053ce4aa7a964657f5ef7ca92
#: ../../networking2.rst:4953
msgid "Connectivity Options for a VPC"
msgstr "Options de connectivité pour un VPC"

# 5d9bd85e540b4cd89292060896221da5
#: ../../networking2.rst:4955
msgid "You can connect your VPC to:"
msgstr "Vous pouvez connecter votre VPC à :"

# d4a48f7eedb24cd0ada3d40f216fd98e
#: ../../networking2.rst:4959
msgid "The Internet through the public gateway."
msgstr "à Internet en passant par la passerelle publique."

# 24471a284e4241e0bd0c5c456168c7a8
#: ../../networking2.rst:4963
msgid ""
"The corporate datacenter by using a site-to-site VPN connection through the VPN "
"gateway."
msgstr ""
"au centre de données de l'entreprise en utilisant une connexion VPN site à site "
"en passant par la passerelle VPN."

# 25fc02e4454849d4a573bd5dd0d7449a
#: ../../networking2.rst:4968
msgid ""
"Both the Internet and your corporate datacenter by using both the public gateway "
"and a VPN gateway."
msgstr ""
"A la fois à Internet et à votre centre de données interne en utilisant à la fois "
"la passerelle publique et une passerelle VPN."

# de5ded73de514bd5a57ecb362fc2faff
#: ../../networking2.rst:4972
msgid "VPC Network Considerations"
msgstr "Considérations sur le réseau du VPC"

# 78994af1e78348c9ba1f4b1565241a38
#: ../../networking2.rst:4974
msgid "Consider the following before you create a VPC:"
msgstr "Prendre en compte ce qui suit avant de créer un VPC :"

# cb564008696f42c493ba11e1ed4f80dc
#: ../../networking2.rst:4978
msgid "A VPC, by default, is created in the enabled state."
msgstr "Un VPC, par défaut, est créé dans l'état activé."

# 000ae42b46f34e98836dd0ae06ce491f
#: ../../networking2.rst:4982
msgid ""
"A VPC can be created in Advance zone only, and can't belong to more than one "
"zone at a time."
msgstr ""
"Un VPC peut être créé dans une zone avancée seulement, et ne peut pas appartenir "
"à plus d'une zone à la fois."

# 057235f5ffdf462bb0c747d2d3069fe8
#: ../../networking2.rst:4987
msgid ""
"The default number of VPCs an account can create is 20. However, you can change "
"it by using the max.account.vpcs global parameter, which controls the maximum "
"number of VPCs an account is allowed to create."
msgstr ""
"Le nombre par défaut de VPC qu'un compte peut créer est de 20. Toutefois, vous "
"pouvez le changer en utilisant le paramètre global max.accounts.vpcs, qui "
"contrôle le nombre maximum de VPCs qu'un compte est autorisé à créer."

# 6356075be5b54a679178f3b08844bb13
#: ../../networking2.rst:4993
msgid ""
"The default number of tiers an account can create within a VPC is 3. You can "
"configure this number by using the vpc.max.networks parameter."
msgstr ""
"Le nombre par défaut de segment qu'un compte peut créer dans un VPC est de 3. "
"Vous pouvez configurer ce nombre en utilisant le paramètre vpc.max.networks."

# 14ee39b30ff7411188721f6d19152415
#: ../../networking2.rst:4999
msgid ""
"Each tier should have an unique CIDR in the VPC. Ensure that the tier's CIDR "
"should be within the VPC CIDR range."
msgstr ""
"Chaque segment devrait avoir un CIDR unique dans le VPC. Assurez vous que le "
"CIDR du segment est bien dans l'intervalle CIDR du VPC."

# 227b4656e25549c3ae49cbd3eadee4da
#: ../../networking2.rst:5004
msgid "A tier belongs to only one VPC."
msgstr "Un segment n'appartient qu'à un seul VPC."

# 8c1c0a2daf2f454daf51a743c52d1875
#: ../../networking2.rst:5008
msgid "All network tiers inside the VPC should belong to the same account."
msgstr "Tout segment réseau à l'intérieur du VPC doit appartenir au même compte."

# 151ef843569c413592482f23408cc0b1
#: ../../networking2.rst:5012
msgid ""
"When a VPC is created, by default, a SourceNAT IP is allocated to it. The Source "
"NAT IP is released only when the VPC is removed."
msgstr ""
"Lorsqu'un VPC est créé, par défaut, une IP Source NAT lui est allouée. L'adresse "
"IP source NAT est libérée seulement lorsque le VPC est supprimé."

# a4dbf6325246473c80fa288a2c05f46f
#: ../../networking2.rst:5017
msgid ""
"A public IP can be used for only one purpose at a time. If the IP is a "
"sourceNAT, it cannot be used for StaticNAT or port forwarding."
msgstr ""
"Une IP publique ne peut être utilisée que pour un seul besoin à la fois. Si l'IP "
"est une IP source NAT, elle ne pourra pas être utilisée pour le NAT Statique ou "
"la redirection de port."

# 66e9af0df38d44acbdfd5b4f7c7f2209
#: ../../networking2.rst:5022
msgid ""
"The instances can only have a private IP address that you provision. To "
"communicate with the Internet, enable NAT to an instance that you launch in your "
"VPC."
msgstr ""
"Les instances peuvent seulement avoir une adresse IP privée que vous "
"provisionnez. Pour communiquer avec Internet, activer le NAT pour une instance "
"que vous lancez dans votre VPC."

# a7fc2cd6204b4ccdb272b79d22b93120
#: ../../networking2.rst:5028
msgid ""
"Only new networks can be added to a VPC. The maximum number of networks per VPC "
"is limited by the value you specify in the vpc.max.networks parameter. The "
"default value is three."
msgstr ""
"Seulement les nouveaux réseaux peuvent être ajoutés à un VPC. Le nombre maximum "
"de réseaux par VPC est limité par la valeur que vous spécifiez dans le paramètre "
"vpc.max.networks. La valeur par défaut est trois."

# 636571d03b1244af968495ed107bce4f
#: ../../networking2.rst:5034
msgid ""
"The load balancing service can be supported by only one tier inside the VPC."
msgstr ""
"La service de répartition de charge ne peut être supporté que par un seul "
"segment à l'intérieur du VPC."

# 690bdd20a5e449298f4d89ca8d62c663
#: ../../networking2.rst:5039
msgid "If an IP address is assigned to a tier:"
msgstr "Si une adresse IP est attribuée à un segment :"

# 58b11a4dc63949a7a3052e4aa24933d5
#: ../../networking2.rst:5043
msgid ""
"That IP can't be used by more than one tier at a time in the VPC. For example, "
"if you have tiers A and B, and a public IP1, you can create a port forwarding "
"rule by using the IP either for A or B, but not for both."
msgstr ""
"Cette IP ne peut pas être utilisée par plus d'un segment à la fois dans le VPC. "
"Par exemple, si vous avez les segments A et B et une IP1 publique, vous pouvez "
"créer une règle de transmission de port en utilisant l'IP soit pour A ou B mais "
"pas pour les deux."

# 856f012d37d643d8804e106bcbfc20f7
#: ../../networking2.rst:5050
msgid ""
"That IP can't be used for StaticNAT, load balancing, or port forwarding rules "
"for another guest network inside the VPC."
msgstr ""
"Cette IP ne peut pas être utilisée pour du NAT Statique, pour la répartition de "
"charge ou pour les règles de transmission de port pour un autre réseau invité au "
"sein du VPC."

# 4683db25b3ea4e4188deea16746ee8e9
#: ../../networking2.rst:5055
msgid "Remote access VPN is not supported in VPC networks."
msgstr "Les accès distants VPN ne sont pas supportés dans les réseaux du VPC."

# d6e7cab15dfe4412bd18e44c210098b5
#: ../../networking2.rst:5058
msgid "Adding a Virtual Private Cloud"
msgstr "Ajouter un Cloud Privé Virtuel"

# aebf60ad9d2040f5a4693f4948d8ee9f
#: ../../networking2.rst:5060
msgid ""
"When creating the VPC, you simply provide the zone and a set of IP addresses for "
"the VPC network address space. You specify this set of addresses in the form of "
"a Classless Inter-Domain Routing (CIDR) block."
msgstr ""
"Lorsque vous créer le VPC, vous fournissez simplement la zone et un ensemble "
"d'adresses IP pour l'espace d'adresse du réseau du VPC. Vous spécifiez cet "
"ensemble d'adresses dans le format d'un bloc Classless Inter-Domain Routing "
"(CIDR)."

# e96c8770c7a94c51a0e5abf05e27349d
#: ../../networking2.rst:5078
msgid "Click Add VPC. The Add VPC page is displayed as follows:"
msgstr "Cliquer sur Ajouter VPC. La page Ajouter VPC est affichée comme suivant :"

# 5c49f3b134ab451fb0baebec74eb6d02
#: ../../networking2.rst:5080
msgid "|add-vpc.png|"
msgstr "|add-vpc.png|"

# fa0553b67cec41e993031eaa2cfdaf13
#: ../../networking2.rst:5086
msgid "**Name**: A short name for the VPC that you are creating."
msgstr "**Nom** : Un nom court pour le VPC que vous êtes en train de créer."

# 97f59ddee9cd4c10bc7c6f87d980837a
#: ../../networking2.rst:5090
msgid "**Description**: A brief description of the VPC."
msgstr "**Description** :  Une description courte du VPC."

# fb51bf0a8fcf42bf90044a947eeb19d5
#: ../../networking2.rst:5094
msgid "**Zone**: Choose the zone where you want the VPC to be available."
msgstr ""
"**Zone** :  Choisir la zone dans laquelle vous voulez que le VPC soit disponible."

# d7698df9efa0453db3df61a65907f84e
#: ../../networking2.rst:5098
msgid ""
"**Super CIDR for Guest Networks**: Defines the CIDR range for all the tiers "
"(guest networks) within a VPC. When you create a tier, ensure that its CIDR is "
"within the Super CIDR value you enter. The CIDR must be RFC1918 compliant."
msgstr ""
"**Super CIDR pour les réseaux invités** :  définir l'intervalle CIDR pour tous "
"les segments (réseaux invités) au sein du VPC. Lorsque vous créez un segment, "
"assurez vous que son CIDR soit compris dans la valeur du Super CIDR que vous "
"avez entré. Le CIDR doit être conforme à la RFC1918."

# 927e8a069df94b7ab7c15ce7c08682f2
#: ../../networking2.rst:5105
msgid ""
"**DNS domain for Guest Networks**: If you want to assign a special domain name, "
"specify the DNS suffix. This parameter is applied to all the tiers within the "
"VPC. That implies, all the tiers you create in the VPC belong to the same DNS "
"domain. If the parameter is not specified, a DNS domain name is generated "
"automatically."
msgstr ""
"**Domaine DNS pour les réseaux invités** : si vous voulez assigner un nom de "
"domaine spécial, spécifier le suffixe DNS. Ce paramètre est appliqué à tous les "
"segments au sein du VPC. Cela implique que tous les segments que vous créez dans "
"le VPC appartiennent au même domaine DNS. Si le paramètre n'est pas spécifié, un "
"nom de domaine DNS est généré automatiquement."

# db3617bea0a7437a98e0ceb8acf7525b
#: ../../networking2.rst:5113
msgid ""
"**Public Load Balancer Provider**: You have two options: VPC Virtual Router and "
"Netscaler."
msgstr ""
"**Fournisseur publique de répartition de charge** :  Vous avez deux options : "
"Routeur Virtuel VPC et Netscaler."

# 4cfebf8fa1714d45b8ad960ae9f7ab29
#: ../../networking2.rst:5121
msgid "Adding Tiers"
msgstr "Ajouter des Segments"

# c329d2c258cc49dba5536840ef027842
#: ../../networking2.rst:5123
msgid ""
"Tiers are distinct locations within a VPC that act as isolated networks, which "
"do not have access to other tiers by default. Tiers are set up on different "
"VLANs that can communicate with each other by using a virtual router. Tiers "
"provide inexpensive, low latency network connectivity to other tiers within the "
"VPC."
msgstr ""
"Les Segments sont des endroits distincts à l'intérieur d'un VPC qui agissent "
"comme des réseaux isolés, et qui n'ont pas accès aux autres tiers par défaut. "
"Les Segments sont configurés sur différents VLANs qui peuvent communiquer entre "
"eux en utilisant un routeur virtuel. Les Tiers fournissent un moyen simple et à "
"faible latence pour se connecter avec d'autres tiers au sein d'un VPC."

# 28ee0841ce014e79a7a281d4bb216ebc
# c6dc02263cdf449d9a13e9076217f576
#: ../../networking2.rst:5141 ../../networking2.rst:6794
msgid "All the VPC that you have created for the account is listed in the page."
msgstr "Tous les VPC que vous avez créé sur ce compte sont listés dans cette page."

# c99084307ecd4209897fc97c610b02b1
#: ../../networking2.rst:5145
msgid ""
"The end users can see their own VPCs, while root and domain admin can see any "
"VPC they are authorized to see."
msgstr ""
"L'utilisateur final peut voir ses propres VPCs, alors que l'administrateur du "
"domaine ou le root peuvent voir n'importe quel VPC qu'ils sont autorisés à "
"visualiser."

# 1470c73ac281442a9cd21cee278957a9
# 7c8420344fe944869eb9ffe03433dc65
#: ../../networking2.rst:5150 ../../networking2.rst:6799
msgid "Click the Configure button of the VPC for which you want to set up tiers."
msgstr ""
"Cliquez sur le bouton Configurer du VPC pour lequel vous désirez configurer un "
"segment."

# c0383203b6324f44bca1f8d64372fd12
#: ../../networking2.rst:5155
msgid "Click Create network."
msgstr "Cliquer sur Créer un réseau."

# 71dfd71fa8254a17b162b5ecbea81465
#: ../../networking2.rst:5157
msgid "The Add new tier dialog is displayed, as follows:"
msgstr "La boîte de dialogue Ajouter un nouveau segment s'affiche comme suit :"

# 74a521a42b084463aec6f5c6b7a135d8
#: ../../networking2.rst:5159
msgid "|add-tier.png|"
msgstr "|add-tier.png|"

# cd56a1cb2ee5401699918cb0e48192d6
#: ../../networking2.rst:5161
msgid ""
"If you have already created tiers, the VPC diagram is displayed. Click Create "
"Tier to add a new tier."
msgstr ""
"Si vous avez déjà créé un segment, le diagramme du VPC est affiché. Cliquez sur "
"Créer un segment pour en ajouter un nouveau."

# 08999394431847eb807438afe40264eb
#: ../../networking2.rst:5172
msgid "**Name**: A unique name for the tier you create."
msgstr "**Nom** : Un nom unique pour le segment que vous créez."

# b1d5cef8af774c368f4db6f7adb35ae4
#: ../../networking2.rst:5176
msgid ""
"**Network Offering**: The following default network offerings are listed: "
"Internal LB, DefaultIsolatedNetworkOfferingForVpcNetworksNoLB, "
"DefaultIsolatedNetworkOfferingForVpcNetworks"
msgstr ""
"**Offre réseau** : Les offres par défaut de réseaux sont listées :  Internal LB, "
"DefaultIsolatedNetworkOfferingForVpcNetworksNoLB, "
"DefaultIsolatedNetworkOfferingForVpcNetworks"

# a109edde2faf4ec4b1f5de31c2c91472
#: ../../networking2.rst:5181
msgid ""
"In a VPC, only one tier can be created by using LB-enabled network offering."
msgstr ""
"Dans un VPC, un seul segment peut être créé en utilisant une offre réseau avec "
"répartition de charge activée."

# cb1a1e05c80349aba5c29f7eb19fb029
#: ../../networking2.rst:5193
msgid "**VLAN**: The VLAN ID for the tier that the root admin creates."
msgstr "**VLAN** :  L'ID du VLAN pour le segment que l'administrateur root créé."

# 3a87f69636d34930b6e2382a6c0df8ed
#: ../../networking2.rst:5195
msgid ""
"This option is only visible if the network offering you selected is VLAN-enabled."
msgstr ""
"Cette option n'est seulement visible que si l'offre réseau que vous avez "
"sélectionné est VLAN-enabled."

# 94a1b1fbefab4cd88665da31ab04dff5
#: ../../networking2.rst:5198
msgid ""
"For more information, see `\"Assigning VLANs to Isolated Networks\" <hosts."
"html#assigning-vlans-to-isolated-networks>`_."
msgstr ""
"Pour plus d'informations, voir `\"Assigner des VLANs à des réseaux isolés\" "
"<hosts.html#assigning-vlans-to-isolated-networks>`_."

# 2c2c9c5c56b24b02b949731d057ccece
#: ../../networking2.rst:5215
msgid "Continue with configuring access control list for the tier."
msgstr "Continuer avec la configuration des contrôle d'accès pour ce segment."

# fe50554812f144079082cb76d478f030
#: ../../networking2.rst:5220
msgid "Configuring Network Access Control List"
msgstr "Configurer une liste de contrôle d'accès réseau"

# e6ac09ebbb494a58abe8f4e2b48ab189
#: ../../networking2.rst:5222
msgid ""
"Define Network Access Control List (ACL) on the VPC virtual router to control "
"incoming (ingress) and outgoing (egress) traffic between the VPC tiers, and the "
"tiers and Internet. By default, all incoming traffic to the guest networks is "
"blocked and all outgoing traffic from guest networks is allowed, once you add an "
"ACL rule for outgoing traffic, then only outgoing traffic specified in this ACL "
"rule is allowed, the rest is blocked. To open the ports, you must create a new "
"network ACL. The network ACLs can be created for the tiers only if the "
"NetworkACL service is supported."
msgstr ""
"Définissez la liste de contrôle d'accès réseau (ACL) sur le routeur virtuel VPC "
"pour contrôler le trafic entrant (ingress) et sortant (egress) entre les VPC des "
"segments, les segments et Internet. Par défaut, tout le trafic entrant vers les "
"réseaux invités est bloqué et tout le trafic sortant des réseaux invités est "
"autorisé, une fois que vous ajoutez une règle ACL pour le trafic sortant, seul "
"le trafic sortant spécifié dans cette règle ACL est autorisé, le reste est "
"bloqué. Pour ouvrir les ports, vous devez créer une nouvelle ACL réseau. Les ACL "
"réseau ne peuvent être créées pour les segments que si le service NetworkACL est "
"pris en charge."

# 98625caa21a9468fa1732748d2a17096
#: ../../networking2.rst:5233
msgid "About Network ACL Lists"
msgstr "A propos des listes d'ACL réseau"

# 09938c6b069c491ea32225bf40b4c1cb
#: ../../networking2.rst:5235
msgid ""
"In CloudStack terminology, Network ACL is a group of Network ACL items. Network "
"ACL items are nothing but numbered rules that are evaluated in order, starting "
"with the lowest numbered rule. These rules determine whether traffic is allowed "
"in or out of any tier associated with the network ACL. You need to add the "
"Network ACL items to the Network ACL, then associate the Network ACL with a "
"tier. Network ACL is associated with a VPC and can be assigned to multiple VPC "
"tiers within a VPC. A Tier is associated with a Network ACL at all the times. "
"Each tier can be associated with only one ACL."
msgstr ""
"Dans la terminologie CloudStack, une ACL réseau est un groupe d'entrées d'ACL "
"réseau. Les entrées d'ACL réseau ne sont rien d'autre que des règles numérotées "
"qui sont évaluées dans l'ordre, en commençant par la règle numérotée la plus "
"faible. Ces règles déterminent si le trafic est autorisé en entrée ou en sortie "
"de n'importe quel segment associé à l'ACL réseau. Vous devez ajouter les entrées "
"d'ACL réseau à la liste d'ACL réseau, puis associer la liste ACL réseau à un "
"segment. L'ACL réseau est associée à un VPC et peut être affectée à plusieurs "
"VPC de segments dans un VPC. Un segment peut être associé à une ACL réseau à "
"tout moment. Chaque segment peut être associé à une seule ACL."

# c66744937e154fa482ad3a3e61f312b8
#: ../../networking2.rst:5245
msgid ""
"The default Network ACL is used when no ACL is associated. Default behavior is "
"all the incoming traffic is blocked and outgoing traffic is allowed from the "
"tiers. Default network ACL cannot be removed or modified. Contents of the "
"default Network ACL is:"
msgstr ""
"L'ACL réseau par défaut est utilisée lorsqu'aucune ACL n'est associée. Le "
"comportement par défaut est de bloquer tout le trafic entrant et d'autoriser le "
"trafic sortant depuis les segments. L'ACL réseau par défaut ne peut pas être "
"supprimée ou modifiée. Le contenu de l'ACL réseau par défaut est :"

# e83245e0845e43b2974a692e326ac4d0
#: ../../networking2.rst:5251
msgid "Rule"
msgstr "Règle"

# 80ab5b23b00f4d199c8b9abbf436bb6c
#: ../../networking2.rst:5251
msgid "Protocol"
msgstr "Protocole"

# fd729c57b4ea4e5eba4b9567d5fb91c0
#: ../../networking2.rst:5251
msgid "Traffic type"
msgstr "Type de trafic"

# c829bf78c58d40288a0ea4fc4372babf
#: ../../networking2.rst:5251
msgid "Action"
msgstr "Action"

# 428dd3d46f624c17b6333ea245a479d1
# 0044bb0439f34285b617e17b26a24c31
#: ../../networking2.rst:5253 ../../networking2.rst:5254
msgid "All"
msgstr "Tout"

# fab35c06087d44a7874a0f5bcd4b49a3
#: ../../networking2.rst:5253
msgid "Ingress"
msgstr "Règles entrantes"

# 28a1e4dff1af4530b1bc7247d7231156
# f074d55a63a84bdd93f4679ef5703083
#: ../../networking2.rst:5253 ../../networking2.rst:5254
msgid "0.0.0.0/0"
msgstr "0.0.0.0/0"

# b4f811fade53417f914ba70fdda841eb
#: ../../networking2.rst:5254
msgid "Egress"
msgstr "Règles sortantes"

# 8cc5201e9ef74389bf852a8c965d8c58
#: ../../networking2.rst:5258
msgid "Creating ACL Lists"
msgstr "Créer les listes d'ACL"

# 1d2d971c7e064b558d73374bc47d82d0
# 3404c28191eb451a91f3cfa59aefaba4
#: ../../networking2.rst:5321 ../../networking2.rst:5363
msgid "Select Network ACL Lists."
msgstr "Sélectionner les listes d'ACL réseaux."

# faf3ffe663364217b1a4616fa0286cf2
#: ../../networking2.rst:5323
msgid ""
"The following default rules are displayed in the Network ACLs page: default"
"\\_allow, default\\_deny."
msgstr ""
"Les règles par défaut suivantes sont affichées dans la page d'ACL réseau : "
"default\\_allow, default\\_deny."

# f9e4f48e72cc497a8f9dcdbb42107837
#: ../../networking2.rst:5328
msgid "Click Add ACL Lists, and specify the following:"
msgstr "Cliquer sur Ajouter des listes d'ACL et spécifier ce qui suit :"

# 90439c9713414c43aa9c2e05eb942726
#: ../../networking2.rst:5332
msgid "**ACL List Name**: A name for the ACL list."
msgstr "**Nom de la liste d'ACL** : Un nom pour la liste d'ACL."

# d7606f1b49fa42f190dcf0037e7a7f82
#: ../../networking2.rst:5336
msgid ""
"**Description**: A short description of the ACL list that can be displayed to "
"users."
msgstr ""
"**Description** : Une description courte de la liste d'ACL qui peut être "
"affichée aux utilisateurs."

# 48a4f463117347eb8b319809642e7da8
#: ../../networking2.rst:5340
msgid "Creating an ACL Rule"
msgstr "Créer une règle d'ACL"

# 2651d622eb634957a6d286e42b35b431
#: ../../networking2.rst:5365
msgid ""
"In addition to the custom ACL lists you have created, the following default "
"rules are displayed in the Network ACLs page: default\\_allow, default\\_deny."
msgstr ""
"En complément aux listes d'ACL personnalisées que vous avez créés, les règles "
"par défaut suivantes sont affichées dans la page d'ACL réseaux : default"
"\\_allow, default\\_deny."

# 8589eb86d31d49b0b8b3a066e403dea3
# 9fe9f83f4eea466b8c268bff18971db7
#: ../../networking2.rst:5371 ../../networking2.rst:5495
msgid "Select the desired ACL list."
msgstr "Sélectionner la liste d'ACL désirée."

# 526f674e5a544241bfcb69fec29f6b30
#: ../../networking2.rst:5375
msgid "Select the ACL List Rules tab."
msgstr "Sélectionner l'onglet Règles de liste d'ACL."

# 6b315c7b1ebe42268824f83af55fae75
#: ../../networking2.rst:5377
msgid ""
"To add an ACL rule, fill in the following fields to specify what kind of network "
"traffic is allowed in the VPC."
msgstr ""
"Pour ajouter une règle d'ACL, remplir les champs suivants pour spécifier quel "
"type de trafic réseau est autorisé dans le VPC."

# e9fd41991f514decba25f1e0b8bacf9a
#: ../../networking2.rst:5382
msgid "**Rule Number**: The order in which the rules are evaluated."
msgstr "**Numéro de règle** : L'ordre dans lequel les règles sont évaluées."

# 74e33543194246e9bf723eb7f8579770
#: ../../networking2.rst:5386
msgid ""
"**CIDR**: The CIDR acts as the Source CIDR for the Ingress rules, and "
"Destination CIDR for the Egress rules. To accept traffic only from or to the IP "
"addresses within a particular address block, enter a CIDR or a comma-separated "
"list of CIDRs. The CIDR is the base IP address of the incoming traffic. For "
"example, 192.168.0.0/22. To allow all CIDRs, set to 0.0.0.0/0."
msgstr ""
"**CIDR** : Le CIDR agit en tant que CIDR source pour les règles Ingress et en "
"tant que CIDR de destination pour les règles Egress. Pour accepter le trafic "
"uniquement depuis ou vers les adresses IP d'un bloc d'adresses particulier, "
"entrez un CIDR ou une liste séparée par des virgules de CIDR. Le CIDR est "
"l'adresse IP de base du trafic entrant. Par exemple, 192.168.0.0/22. Pour "
"autoriser tous les CIDR, saisissez 0.0.0.0/0."

# 56275e37fc8b4caea8702ef3e16f0361
#: ../../networking2.rst:5395
msgid "**Action**: What action to be taken. Allow traffic or block."
msgstr ""
"**Action** : Quelle action doit être prise. Autoriser le trafic ou le bloquer."

# 3a81766b5639471dad96fc442722931a
#: ../../networking2.rst:5399
msgid ""
"**Protocol**: The networking protocol that sources use to send traffic to the "
"tier. The TCP and UDP protocols are typically used for data exchange and end-"
"user communications. The ICMP protocol is typically used to send error messages "
"or network monitoring data. All supports all the traffic. Other option is "
"Protocol Number."
msgstr ""
"**Protocole**: Le protocole réseau que les sources utilisent pour envoyer le "
"trafic vers le segment. Les protocoles TCP et UDP sont généralement utilisés "
"pour l'échange de données et les communications avec l'utilisateur final. Le "
"protocole ICMP est généralement utilisé pour envoyer des messages d'erreur ou "
"des données de surveillance du réseau. All supporte tout le trafic. La dernière "
"option est de fournir le numéro de protocole."

# f182719948c24202b52f34f53d6237ca
#: ../../networking2.rst:5408
msgid ""
"**Start Port**, **End Port** (TCP, UDP only): A range of listening ports that "
"are the destination for the incoming traffic. If you are opening a single port, "
"use the same number in both fields."
msgstr ""

# 95cc0c49ceea4d609a66a6f010f464a8
#: ../../networking2.rst:5414
msgid ""
"**Protocol Number**: The protocol number associated with IPv4 or IPv6. For more "
"information, see `Protocol Numbers <http://www.iana.org/assignments/protocol-"
"numbers/protocol-numbers.xml>`_."
msgstr ""

# 9557a03428624acd806829547ae0ca87
#: ../../networking2.rst:5420
msgid ""
"**ICMP Type**, **ICMP Code** (ICMP only): The type of message and error code "
"that will be sent."
msgstr ""

# daa0c660c1ee4f7c86a1abd1282d5aa5
#: ../../networking2.rst:5425
msgid "**Traffic Type**: The type of traffic: Incoming or outgoing."
msgstr ""

# 2a986f306a534501ac5ce1869c4879b2
#: ../../networking2.rst:5429
msgid "Click Add. The ACL rule is added."
msgstr "Cliquer sur Ajouter. La règle ACL est ajouée."

# 1ff7a90c1c8b4226b22c2f267b0cd329
#: ../../networking2.rst:5431
msgid ""
"You can edit the tags assigned to the ACL rules and delete the ACL rules you "
"have created. Click the appropriate button in the Details tab."
msgstr ""
"Vous pouvez éditer les étiquettes assignées aux règles d'ACL et supprimer les "
"règles d'ACL que vous avez créées. Cliquer sur le bouton approprié dans l'onglet "
"Détails."

# 497f804bbce846e084e10331e6e0079b
#: ../../networking2.rst:5436
msgid "Creating a Tier with Custom ACL List"
msgstr "Créer un segment avec une liste d'ACL personnalisée."

# d0c0bf84620447fc8dfa178137f97b16
# d930dbc632b042b188ba54a843e568f1
#: ../../networking2.rst:5440 ../../networking2.rst:5465
msgid "Create a VPC."
msgstr "Créer un VPC."

# 25eee7556d974e60bbeb1f18e85c55df
# 6ed43363cfac4b8987d1e2d72304c877
#: ../../networking2.rst:5444 ../../networking2.rst:5477
msgid "Create a custom ACL list."
msgstr "Créer une liste d'ACL personnalisée."

# 6dcc5bedc2554ba1a3e36b2e2b3645be
# 5463933959af4e5288a81e194a5e6a58
#: ../../networking2.rst:5448 ../../networking2.rst:5481
msgid "Add ACL rules to the ACL list."
msgstr "Ajouter des règles d'ACL à une liste d'ACL."

# 029e9aecbf464779994d37ec61ad7314
# 0413f59339f64f0b873ba87c7d559a84
#: ../../networking2.rst:5452 ../../networking2.rst:5469
msgid "Create a tier in the VPC."
msgstr "Créer un segment dans le VPC."

# d789fdcbc43847f981d99a6c6a203caf
#: ../../networking2.rst:5454
msgid "Select the desired ACL list while creating a tier."
msgstr "Sélectionner la liste d'ACL désirée lors de la création du segment."

# d2aee63fb26240c8ab5829112ee254c1
#: ../../networking2.rst:5461
msgid "Assigning a Custom ACL List to a Tier"
msgstr "Assigner une liste d'ACL personnalisée à un segment"

# b0606dffaee64d4994e5e57c20a1c455
#: ../../networking2.rst:5473
msgid "Associate the tier with the default ACL rule."
msgstr "Associer le segment avec la règle d'ACL par défaut."

# 6113c98ff3804f59808cc2f432c7312e
#: ../../networking2.rst:5485
msgid "Select the tier for which you want to assign the custom ACL."
msgstr ""
"Sélectionner le segment pour lequel vous voulez assigner l'ACL personnalisée."

# 14772476c28c4746811457f94c763124
#: ../../networking2.rst:5489
msgid "Click the Replace ACL List icon. |replace-acl-icon.png|"
msgstr "Cliquer sur l'icone Remplacer la liste d'ACL. |replace-acl-icon.png|"

# c4482d85ed6040e0978d138c1416283a
#: ../../networking2.rst:5491
msgid "The Replace ACL List dialog is displayed."
msgstr "La boîte de dialogue Remplacer la liste d'ACL est affichée."

# 8abffdce40894b3fafb845f68b82bc74
#: ../../networking2.rst:5504
msgid "Adding a Private Gateway to a VPC"
msgstr "Ajouter une passerelle privée à un VPC"

# 743a879733de4969814a821843950e18
#: ../../networking2.rst:5506
msgid ""
"A private gateway can be added by the root admin only. The VPC private network "
"has 1:1 relationship with the NIC of the physical network. You can configure "
"multiple private gateways to a single VPC. No gateways with duplicated VLAN and "
"IP are allowed in the same data center."
msgstr ""

# dd777f72c6814da7a4e087c6c8c60cbe
#: ../../networking2.rst:5528
msgid ""
"Click the Configure button of the VPC to which you want to configure load "
"balancing rules."
msgstr ""

# 27478e3646e84848b0ead2c5ad0d50f9
# d08325208f454c9b8c778e4776c4daa3
# bc97c76d6cd648dc9717c2058744a84e
#: ../../networking2.rst:5538 ../../networking2.rst:5864 ../../networking2.rst:5951
msgid "The following options are displayed."
msgstr "Les options suivantes sont affichées."

# 394a3dcb6e3741b489d58eb9830c71e9
#: ../../networking2.rst:5580
msgid "Select Private Gateways."
msgstr "Sélectionner Passerelles privées."

# e4a0570c1e7a471cb5d358378b06e7fe
#: ../../networking2.rst:5582
msgid "The Gateways page is displayed."
msgstr "La page Passerelles est affichée."

# 6ca2b7325b9e4244a7785ff0e1ddbfd9
#: ../../networking2.rst:5586
msgid "Click Add new gateway:"
msgstr "Cliquer sur Ajouter une nouvelle passerelle :"

# 1d19d16a595c4323b72e7afcfa725bee
#: ../../networking2.rst:5588
msgid "|add-new-gateway-vpc.png|"
msgstr "add-new-gateway-vpc.png|"

# 8413e5ef903842ec837e56605289465f
#: ../../networking2.rst:5596
msgid "**Physical Network**: The physical network you have created in the zone."
msgstr "**Réseau physique** : Le réseau physique que vous avez créé dans la zone."

# 0a11f680d5cf4a41a7a387b092f56f28
#: ../../networking2.rst:5601
msgid "**IP Address**: The IP address associated with the VPC gateway."
msgstr "**Adresse IP** :  L'adresse IP associée avec la passerelle du VPC."

# fd907890f582482d8e4cf0dd81960ff5
#: ../../networking2.rst:5605
msgid ""
"**Gateway**: The gateway through which the traffic is routed to and from the VPC."
msgstr ""
"**Passerelle** : La passerelle par laquelle le trafic est routé depuis et vers "
"le VPC."

# 7487738adef9453d85604bfba671fa3f
#: ../../networking2.rst:5610
msgid "**Netmask**: The netmask associated with the VPC gateway."
msgstr ""
"**Masque de sous-réseaux** : Le masque de sous-réseaux associé avec la "
"passerelle du VPC."

# 16e78548659f4f26a1bda70303cc2316
#: ../../networking2.rst:5614
msgid "**VLAN**: The VLAN associated with the VPC gateway."
msgstr "**VLAN** : Le VLAN associé avec la passerelle du VPC."

# 4cdaeb9a18454c5a91c6210ae427c1a9
#: ../../networking2.rst:5618
msgid ""
"**Source NAT**: Select this option to enable the source NAT service on the VPC "
"private gateway."
msgstr ""
"**Source NAT** : Sélectionner cette option pour activer le service de NAT source "
"sur la passerelle privée du VPC."

# c6b56cf49a42479893378e9da36129da
#: ../../networking2.rst:5621
msgid "See \":ref:`source-nat-priv-gw`\"."
msgstr "Voir \":ref:`source-nat-priv-gw`\"."

# c362a5b1af954f8c9a1fd9e40fb438db
#: ../../networking2.rst:5625
msgid ""
"**ACL**: Controls both ingress and egress traffic on a VPC private gateway. By "
"default, all the traffic is blocked."
msgstr ""

# a6398dc9bed3442296a3f9cac8a90a34
#: ../../networking2.rst:5628
msgid "See \":ref:`acl-priv-gw`\"."
msgstr "Voir \":ref:`acl-priv-gw`\"."

# b9e1f64ee58f4a9fa3bdd10dd0cfaa4f
#: ../../networking2.rst:5630
msgid ""
"The new gateway appears in the list. You can repeat these steps to add more "
"gateway for this VPC."
msgstr ""

# f6c87880d85a40cfa41db29b98eb2194
#: ../../networking2.rst:5636
msgid "Source NAT on Private Gateway"
msgstr ""

# 5a7c4b197f044c9bbb56e419cc6153a8
#: ../../networking2.rst:5638
msgid ""
"You might want to deploy multiple VPCs with the same super CIDR and guest tier "
"CIDR. Therefore, multiple guest VMs from different VPCs can have the same IPs to "
"reach a enterprise data center through the private gateway. In such cases, a NAT "
"service need to be configured on the private gateway to avoid IP conflicts. If "
"Source NAT is enabled, the guest VMs in VPC reaches the enterprise network via "
"private gateway IP address by using the NAT service."
msgstr ""

# 5a246caddff54fc8aeda076ee6ad6da2
#: ../../networking2.rst:5646
msgid ""
"The Source NAT service on a private gateway can be enabled while adding the "
"private gateway. On deletion of a private gateway, source NAT rules specific to "
"the private gateway are deleted."
msgstr ""

# 7b68b00b8cae40daa6b6e018b007407f
#: ../../networking2.rst:5650
msgid ""
"To enable source NAT on existing private gateways, delete them and create afresh "
"with source NAT."
msgstr ""

# 5eb31def4dea44a8b45223d8bfba9bc1
#: ../../networking2.rst:5656
msgid "ACL on Private Gateway"
msgstr "ACL sur une passerelle privée"

# 43dd38fb6bcb4da99519465cd2fee79e
#: ../../networking2.rst:5658
msgid ""
"The traffic on the VPC private gateway is controlled by creating both ingress "
"and egress network ACL rules. The ACLs contains both allow and deny rules. As "
"per the rule, all the ingress traffic to the private gateway interface and all "
"the egress traffic out from the private gateway interface are blocked."
msgstr ""

# 968f844cb23249299b07710fbdea8328
#: ../../networking2.rst:5664
msgid ""
"You can change this default behaviour while creating a private gateway. "
"Alternatively, you can do the following:"
msgstr ""

# c42acc331624417e9e3770047d128c45
# f426686ca214461286b5b27085ef9e07
#: ../../networking2.rst:5669 ../../networking2.rst:5715
msgid "In a VPC, identify the Private Gateway you want to work with."
msgstr ""

# bebf8abea37d4d5da748d4dc7da121e9
#: ../../networking2.rst:5673
msgid "In the Private Gateway page, do either of the following:"
msgstr ""

# 83b961b102be4930990a6f24d2f61788
#: ../../networking2.rst:5677
msgid "Use the Quickview. See 3."
msgstr ""

# af59e46963cc4dfcae44b860b6d546a1
#: ../../networking2.rst:5681
msgid "Use the Details tab. See 4 through ."
msgstr ""

# d774795a1b854c8e9b7b135859f6dc59
#: ../../networking2.rst:5685
msgid ""
"In the Quickview of the selected Private Gateway, click Replace ACL, select the "
"ACL rule, then click OK"
msgstr ""

# 24203d2c129848b3a54d2a2a6f231ce4
#: ../../networking2.rst:5690
msgid "Click the IP address of the Private Gateway you want to work with."
msgstr ""

# 1374de69edfb44449764f2be1dcb29e2
#: ../../networking2.rst:5694
msgid "In the Detail tab, click the Replace ACL button. |replace-acl-icon.png|"
msgstr ""
"Dans l'onglet Détail, cliquer sur le bouton Remplacer les ACL. |replace-acl-icon."
"png|"

# 0a1a67c900a645b587377ce0696fcc69
#: ../../networking2.rst:5697
msgid "The Replace ACL dialog is displayed."
msgstr "La boîte de dialogue Remplacer la liste d'ACL est affichée."

# b054350634fe4a6a93e997e7888de509
#: ../../networking2.rst:5701
msgid "select the ACL rule, then click OK."
msgstr "Sélectionner la règle d'ACL puis cliquer sur OK."

# 89bdf37574754f799764bcd9ea9b8154
#: ../../networking2.rst:5703
msgid ""
"Wait for few seconds. You can see that the new ACL rule is displayed in the "
"Details page."
msgstr ""

# 5156bdb1b2c6423aa03d31c6d234cdbb
#: ../../networking2.rst:5707
msgid "Creating a Static Route"
msgstr ""

# 188c119a7dde4624a113c36b70910b9e
#: ../../networking2.rst:5709
msgid ""
"CloudStack enables you to specify routing for the VPN connection you create. You "
"can enter one or CIDR addresses to indicate which traffic is to be routed back "
"to the gateway."
msgstr ""

# c483d63531ae420796887a1e3a3f5ab3
#: ../../networking2.rst:5719
msgid ""
"In the Private Gateway page, click the IP address of the Private Gateway you "
"want to work with."
msgstr ""

# df50f83dcb434a239f5ce4054573908a
#: ../../networking2.rst:5724
msgid "Select the Static Routes tab."
msgstr ""

# ddbc917d09ae47a1a33bb2e422a41ac8
#: ../../networking2.rst:5728
msgid "Specify the CIDR of destination network."
msgstr ""

# 14be55f3d8354339befda018b8959689
#: ../../networking2.rst:5734
msgid "Wait for few seconds until the new route is created."
msgstr ""

# 4bb61ba3dd1444269d2f517a3d774dac
#: ../../networking2.rst:5737
msgid "Blacklisting Routes"
msgstr ""

# bf15aaf7395c48438bdfb1c5a1b303cd
#: ../../networking2.rst:5739
msgid ""
"CloudStack enables you to block a list of routes so that they are not assigned "
"to any of the VPC private gateways. Specify the list of routes that you want to "
"blacklist in the ``blacklisted.routes`` global parameter. Note that the "
"parameter update affects only new static route creations. If you block an "
"existing static route, it remains intact and continue functioning. You cannot "
"add a static route if the route is blacklisted for the zone."
msgstr ""

# 0331141edca34d0d88619127d2766371
#: ../../networking2.rst:5748
msgid "Deploying VMs to the Tier"
msgstr "Déployer des VM dans un segment"

# 704ce74d41e94806a21f067331377028
#: ../../networking2.rst:5770
msgid "The VPC page is displayed where all the tiers you have created are listed."
msgstr ""

# bb949e6b291d4db5b13cf4fe9834f452
#: ../../networking2.rst:5775
msgid "Click Virtual Machines tab of the tier to which you want to add a VM."
msgstr ""

# 71ad9ca13d4c4362972cdf2637e41c93
#: ../../networking2.rst:5777
msgid "|add-vm-vpc.png|"
msgstr "|add-vm-vpc.png|"

# 2f2516ad2c5942d999843c0a9a68933e
#: ../../networking2.rst:5779
msgid "The Add Instance page is displayed."
msgstr "La page Ajouter une Instance est affichée."

# 1d62201e441d48f788fa541062d4c596
#: ../../networking2.rst:5781
msgid ""
"Follow the on-screen instruction to add an instance. For information on adding "
"an instance, see the Installation Guide."
msgstr ""

# 635c6aa90270428badb026296ec37787
#: ../../networking2.rst:5785
msgid "Deploying VMs to VPC Tier and Shared Networks"
msgstr ""

# dd3534643d7a477c824d8e185d5475e4
#: ../../networking2.rst:5787
msgid ""
"CloudStack allows you deploy VMs on a VPC tier and one or more shared networks. "
"With this feature, VMs deployed in a multi-tier application can receive "
"monitoring services via a shared network provided by a service provider."
msgstr ""

# b14c4ec942684d4d8a32be3cc684ba90
#: ../../networking2.rst:5794
msgid "Log in to the CloudStack UI as an administrator."
msgstr "Se connecter à l'interface de CloudStack comme administrateur."

# 47af434606084162a5d43bfca5f9a35c
#: ../../networking2.rst:5798
msgid "In the left navigation, choose Instances."
msgstr "Dans la barre de navigation de gauche, choisir Instances."

# 75908924f9fe449db880b8f340e3e1b9
#: ../../networking2.rst:5802
msgid "Click Add Instance."
msgstr "Cliquer sur Ajouter une instance."

# 1129214998c14deca387e232b2b61a2c
#: ../../networking2.rst:5806
msgid "Select a zone."
msgstr "Sélectionner une zone."

# 447c3075519c4efcb0cce18f747c5fdc
#: ../../networking2.rst:5810
msgid "Select a template or ISO, then follow the steps in the wizard."
msgstr ""

# ac1ff1f49a954b0dbd5cd4e18543ec70
#: ../../networking2.rst:5814
msgid ""
"Ensure that the hardware you have allows starting the selected service offering."
msgstr ""

# 5e9d7d945a51416db45c9d4c136cf660
#: ../../networking2.rst:5819
msgid "Under Networks, select the desired networks for the VM you are launching."
msgstr ""

# 6a193b8ef2e14baab4287c9227dbd94f
#: ../../networking2.rst:5822
msgid "You can deploy a VM to a VPC tier and multiple shared networks."
msgstr ""

# 69378b350f8540138b3659036450b93e
#: ../../networking2.rst:5824
msgid "|addvm-tier-sharednw.png|"
msgstr "|addvm-tier-sharednw.png|"

# c32a2db50b2b44dfa529d303ae7737ca
#: ../../networking2.rst:5828
msgid "Click Next, review the configuration and click Launch."
msgstr ""

# 424cd68b49af4936b7a29172ce8b21c6
#: ../../networking2.rst:5830
msgid "Your VM will be deployed to the selected VPC tier and shared network."
msgstr ""

# a466e870147241b7a6266b24ffb983be
#: ../../networking2.rst:5833
msgid "Acquiring a New IP Address for a VPC"
msgstr "Acquérir une nouvelle adresse IP pour un VPC"

# 2469c8b87a5b404695be7cd3d52d8540
#: ../../networking2.rst:5835
msgid ""
"When you acquire an IP address, all IP addresses are allocated to VPC, not to "
"the guest networks within the VPC. The IPs are associated to the guest network "
"only when the first port-forwarding, load balancing, or Static NAT rule is "
"created for the IP or the network. IP can't be associated to more than one "
"network at a time."
msgstr ""

# 20c45cce73544593af8aea069f4556ce
#: ../../networking2.rst:5906
msgid "Select IP Addresses."
msgstr "Sélectionner les adresses IP."

# e00bf099dd75477787b7732cadc10c50
#: ../../networking2.rst:5908
msgid "The Public IP Addresses page is displayed."
msgstr "La page des adresses IP publiques est affichée."

# decf033da44c4b64b64175bbace5e37d
#: ../../networking2.rst:5912
msgid "Click Acquire New IP, and click Yes in the confirmation dialog."
msgstr ""

# f9206ddfd2ad4b9ba496b7bcaa139527
#: ../../networking2.rst:5914
msgid ""
"You are prompted for confirmation because, typically, IP addresses are a limited "
"resource. Within a few moments, the new IP address should appear with the state "
"Allocated. You can now use the IP address in port forwarding, load balancing, "
"and static NAT rules."
msgstr ""

# 1b26f54458754874a03b4d4bf65d1776
#: ../../networking2.rst:5920
msgid "Releasing an IP Address Alloted to a VPC"
msgstr ""

# be262f6b7e5d45269e0940307ba4a209
#: ../../networking2.rst:5922
msgid ""
"The IP address is a limited resource. If you no longer need a particular IP, you "
"can disassociate it from its VPC and return it to the pool of available "
"addresses. An IP address can be released from its tier, only when all the "
"networking ( port forwarding, load balancing, or StaticNAT ) rules are removed "
"for this IP address. The released IP address will still belongs to the same VPC."
msgstr ""

# b689860f9d8243e488f59f407397d0f2
#: ../../networking2.rst:5946
msgid "Click the Configure button of the VPC whose IP you want to release."
msgstr ""

# 275b1067e783409fa57673f2c9079c5f
#: ../../networking2.rst:5993
msgid "Select Public IP Addresses."
msgstr "Sélectionner les adresses IP."

# 03719974990f4be2ab4ef5acfece3c8e
#: ../../networking2.rst:5999
msgid "Click the IP you want to release."
msgstr "Cliquer sur l'IP que vous voulez rendre."

# 0cfc510897374fe28fa93542914d6cf3
#: ../../networking2.rst:6003
msgid "In the Details tab, click the Release IP button |release-ip-icon.png|"
msgstr ""

# be0f2d3e3f7a4e4485e68f2f4eb4339d
#: ../../networking2.rst:6008
msgid "Enabling or Disabling Static NAT on a VPC"
msgstr ""

# b3b3c30b45744238bdaaee1fe21a6ae1
#: ../../networking2.rst:6010
msgid ""
"A static NAT rule maps a public IP address to the private IP address of a VM in "
"a VPC to allow Internet traffic to it. This section tells how to enable or "
"disable static NAT for a particular IP address in a VPC."
msgstr ""

# 8d4539553a8249e59a6c06a65466159f
#: ../../networking2.rst:6043
msgid "For each tier, the following options are displayed."
msgstr ""

# d38f21f4fa594fc99e3fe3eb6bcaac34
#: ../../networking2.rst:6091
msgid "Click the IP you want to work with."
msgstr ""

# 17644423675640bdafb3f481e66d08cd
#: ../../networking2.rst:6095
msgid ""
"In the Details tab,click the Static NAT button. |enable-disable.png| The button "
"toggles between Enable and Disable, depending on whether static NAT is currently "
"enabled for the IP address."
msgstr ""

# d5a0063d431a449b822e840cf68321c0
#: ../../networking2.rst:6102
msgid "If you are enabling static NAT, a dialog appears as follows:"
msgstr ""

# addd4d2aaf5345c486dcddaf20d41069
#: ../../networking2.rst:6104
msgid "|select-vmstatic-nat.png|"
msgstr "|select-vmstatic-nat.png|"

# e794f8894d7c4c4fb1d144b53ba3eef5
#: ../../networking2.rst:6108
msgid "Select the tier and the destination VM, then click Apply."
msgstr ""

# d7cc633eb7064d0e98b22cf3441dea8f
#: ../../networking2.rst:6111
msgid "Adding Load Balancing Rules on a VPC"
msgstr ""

# 1690cddd7d4544da8afebf41a357f0f6
#: ../../networking2.rst:6113
msgid ""
"In a VPC, you can configure two types of load balancing: external LB and "
"internal LB. External LB is nothing but a LB rule created to redirect the "
"traffic received at a public IP of the VPC virtual router. The traffic is load "
"balanced within a tier based on your configuration. Citrix NetScaler and VPC "
"virtual router are supported for external LB. When you use internal LB service, "
"traffic received at a tier is load balanced across different VMs within that "
"tier. For example, traffic reached at Web tier is redirected to another VM in "
"that tier. External load balancing devices are not supported for internal LB. "
"The service is provided by a internal LB VM configured on the target tier."
msgstr ""

# 5ab48adf63474d97b4570c40a24420bb
#: ../../networking2.rst:6125
msgid "Load Balancing Within a Tier (External LB)"
msgstr ""

# c70e83e371234131bf11479286cdbb1c
#: ../../networking2.rst:6127
msgid ""
"A CloudStack user or administrator may create load balancing rules that balance "
"traffic received at a public IP to one or more VMs that belong to a network tier "
"that provides load balancing service in a VPC. A user creates a rule, specifies "
"an algorithm, and assigns the rule to a set of VMs within a tier."
msgstr ""

# 793b75511a124eb49bc054c366095f7f
#: ../../networking2.rst:6134
msgid "Enabling NetScaler as the LB Provider on a VPC Tier"
msgstr ""

# 2cba8bc745e44ac4a8d2aaeca47e11f7
#: ../../networking2.rst:6138
msgid "Add and enable Netscaler VPX in dedicated mode."
msgstr ""

# 2994a10476d64a719afb3c651265ac88
#: ../../networking2.rst:6140
msgid "Netscaler can be used in a VPC environment only if it is in dedicated mode."
msgstr ""

# d112b0ba00654e278f9b1475857355b0
#: ../../networking2.rst:6145
msgid ""
"Create a network offering, as given in \":ref:`create-net-offering-ext-lb`\"."
msgstr ""

# 909680d1f1b34b728fbb4a720169c60b
#: ../../networking2.rst:6149
msgid "Create a VPC with Netscaler as the Public LB provider."
msgstr ""

# 7ff9cc3865b44322afc77e6c4c063878
#: ../../networking2.rst:6151
msgid ""
"For more information, see `\"Adding a Virtual Private Cloud\" <#adding-a-virtual-"
"private-cloud>`_."
msgstr ""

# 9f9ae62b0b214cba91857447245a18d6
#: ../../networking2.rst:6156
msgid "For the VPC, acquire an IP."
msgstr ""

# c75b7cc4b3234929a881c47cc9eac788
#: ../../networking2.rst:6160
msgid ""
"Create an external load balancing rule and apply, as given in :ref:`create-ext-"
"lb-rule`."
msgstr ""

# d874e75e8da946b99ed923dcdaed1708
#: ../../networking2.rst:6166
msgid "Creating a Network Offering for External LB"
msgstr ""

# 7f3a18897d37416bb87a733cb3943071
#: ../../networking2.rst:6168
msgid "To have external LB support on VPC, create a network offering as follows:"
msgstr ""

# f8f209ed13a948109fa2bb53a02c1658
# 2681733d801147e687ba507663618ba4
#: ../../networking2.rst:6173 ../../networking2.rst:6478
msgid "Log in to the CloudStack UI as a user or admin."
msgstr ""

# bfaeb8a949fb4d25a618540dcc365471
# 6c6e4ac1110442ba9ec325328e96bfb8
#: ../../networking2.rst:6177 ../../networking2.rst:6482
msgid "From the Select Offering drop-down, choose Network Offering."
msgstr ""

# 7d4dc49f6e224caa9bee24da2b622a4c
# 8e12000ca5ad480ab9dab674135a18a8
#: ../../networking2.rst:6185 ../../networking2.rst:6490
msgid "In the dialog, make the following choices:"
msgstr ""

# 3d9e45006e6b427b94e238e0f793a577
# 066c1cd8d7414486bd0a821ccffc100b
#: ../../networking2.rst:6189 ../../networking2.rst:6494
msgid "**Name**: Any desired name for the network offering."
msgstr ""

# acbfe1094f0643fea1072cd746f35188
# f27a5e7e95c64d4b984ce309aaaee266
#: ../../networking2.rst:6193 ../../networking2.rst:6498
msgid ""
"**Description**: A short description of the offering that can be displayed to "
"users."
msgstr ""

# 15f09db814bb43e2832e26ce351b9ae6
# d6ebc01d2aea41328bd788a943cea913
#: ../../networking2.rst:6198 ../../networking2.rst:6503
msgid "**Network Rate**: Allowed data transfer rate in MB per second."
msgstr ""

# a4945e04912944f89c7073bdac1af7af
# a9b549ff67de4071aad4f568bc2d7d2b
#: ../../networking2.rst:6202 ../../networking2.rst:6507
msgid ""
"**Traffic Type**: The type of network traffic that will be carried on the "
"network."
msgstr ""

# aefb9c140bc34d2b9b3c2d433d14c685
# 169e4a6365194916a452f640cf688fb0
#: ../../networking2.rst:6207 ../../networking2.rst:6512
msgid "**Guest Type**: Choose whether the guest network is isolated or shared."
msgstr ""

# bdfc22e5126944f5bca7168232a3f3f5
# d937940688b44a349057cd0905cd57b2
#: ../../networking2.rst:6212 ../../networking2.rst:6517
msgid ""
"**Persistent**: Indicate whether the guest network is persistent or not. The "
"network that you can provision without having to deploy a VM on it is termed "
"persistent network."
msgstr ""

# 24cbc093f168445995bd443ca153e32c
# b1ee73a6428247b38f74321037409214
#: ../../networking2.rst:6218 ../../networking2.rst:6523
msgid ""
"**VPC**: This option indicate whether the guest network is Virtual Private Cloud-"
"enabled. A Virtual Private Cloud (VPC) is a private, isolated part of "
"CloudStack. A VPC can have its own virtual network topology that resembles a "
"traditional physical network. For more information on VPCs, see `\"About Virtual "
"Private Clouds\" <#about-virtual-private-clouds>`_."
msgstr ""

# 4bf8da8a72a240cd858cf9a55cb035ad
# 6db873f4ea9f410fb0a58b146ce86962
#: ../../networking2.rst:6226 ../../networking2.rst:6532
msgid ""
"**Specify VLAN**: (Isolated guest networks only) Indicate whether a VLAN should "
"be specified when this offering is used."
msgstr ""

# 1d81bbc322a54e489b5b1da1c925266c
#: ../../networking2.rst:6231
msgid ""
"**Supported Services**: Select Load Balancer. Use Netscaler or VpcVirtualRouter."
msgstr ""

# b7b1ce246f71472ebf576db84b53c0e2
#: ../../networking2.rst:6236
msgid "**Load Balancer Type**: Select Public LB from the drop-down."
msgstr ""

# 7b38714001f849eaac70496b3c171131
#: ../../networking2.rst:6240
msgid ""
"**LB Isolation**: Select Dedicated if Netscaler is used as the external LB "
"provider."
msgstr ""

# f8eb59d83f644c33b8ee256b3cb69be1
# f03b089f4f1442e99afc923137ed1f0f
#: ../../networking2.rst:6245 ../../networking2.rst:6546
msgid ""
"**System Offering**: Choose the system service offering that you want virtual "
"routers to use in this network."
msgstr ""

# e2ce12394dea4b1abc2c67c40b3f20ce
# 537aea511f3244d880cd207f11c31028
#: ../../networking2.rst:6250 ../../networking2.rst:6551
msgid ""
"**Conserve mode**: Indicate whether to use conserve mode. In this mode, network "
"resources are allocated only when the first virtual machine starts in the "
"network."
msgstr ""

# f89be0d5cb8f47a581ef67c728561fc4
# 05c7f9a8f2fa439ba289bc25ce6430ab
#: ../../networking2.rst:6256 ../../networking2.rst:6557
msgid "Click OK and the network offering is created."
msgstr ""

# 492f96c74e934c4385e58a39f4c1633b
#: ../../networking2.rst:6261
msgid "Creating an External LB Rule"
msgstr ""

# b8dd2aecb6fa4106bfed11ed839c7aca
#: ../../networking2.rst:6280
msgid ""
"Click the Configure button of the VPC, for which you want to configure load "
"balancing rules."
msgstr ""

# 522435c1f1414cc18a01df702d9f6281
# bcacf41ce9934ed095e8f719398c45b3
#: ../../networking2.rst:6283 ../../networking2.rst:6593
msgid ""
"The VPC page is displayed where all the tiers you created listed in a diagram."
msgstr ""

# 0ccde3dd807a4f04ac772a7cf191a828
# c8b1e6fcd7554efd9584f9488b591a1f
#: ../../networking2.rst:6343 ../../networking2.rst:6737
msgid "Select the tier to which you want to apply the rule."
msgstr ""

# 1744ccff1ce1472ea311af081db3ec2f
#: ../../networking2.rst:6355
msgid ""
"**Public Port**: The port that receives the incoming traffic to be balanced."
msgstr ""

# 841c7cfded624598a7091a1eb3f3f894
# 1342d03c9f7e4b4a879cc635b80b627e
#: ../../networking2.rst:6365 ../../networking2.rst:6638
msgid ""
"**Algorithm**. Choose the load balancing algorithm you want CloudStack to use. "
"CloudStack supports the following well-known algorithms:"
msgstr ""

# ca0b21cbc71045ef9d692689bdf8753b
# c5c7bc131cb24e8a89af17bc2ee39a95
#: ../../networking2.rst:6375 ../../networking2.rst:6648
msgid "Least connections"
msgstr "Le moins de connexions"

# 6c473e5828a34e0287d62955ca824812
# a9615fbf431b46e4b58d02737e405bca
#: ../../networking2.rst:6379 ../../networking2.rst:6652
msgid "Source"
msgstr "Source"

# 1dc54356abfe4ffa8b1fba11d7728393
#: ../../networking2.rst:6383
msgid ""
"**Stickiness**. (Optional) Click Configure and choose the algorithm for the "
"stickiness policy. See Sticky Session Policies for Load Balancer Rules."
msgstr ""

# 237d74628ed349cf856380cefedd651f
#: ../../networking2.rst:6389
msgid ""
"**Add VMs**: Click Add VMs, then select two or more VMs that will divide the "
"load of incoming traffic, and click Apply."
msgstr ""

# 71e872c5170d4050b696e3ce82700548
#: ../../networking2.rst:6392
msgid ""
"The new load balancing rule appears in the list. You can repeat these steps to "
"add more load balancing rules for this IP address."
msgstr ""

# 4574a620c8424f90a6c9a8c28f5460a1
#: ../../networking2.rst:6396
msgid "Load Balancing Across Tiers"
msgstr ""

# 843b230d3f9d4a50946db6b4012be2cc
#: ../../networking2.rst:6398
msgid ""
"CloudStack supports sharing workload across different tiers within your VPC. "
"Assume that multiple tiers are set up in your environment, such as Web tier and "
"Application tier. Traffic to each tier is balanced on the VPC virtual router on "
"the public side, as explained in `\"Adding Load Balancing Rules on a VPC\" "
"<#adding-load-balancing-rules-on-a-vpc>`_. If you want the traffic coming from "
"the Web tier to the Application tier to be balanced, use the internal load "
"balancing feature offered by CloudStack."
msgstr ""

# 525cb00286734509a00f17f18c86ced6
#: ../../networking2.rst:6408
msgid "How Does Internal LB Work in VPC?"
msgstr ""

# 4cd2c13cae1c4f91876bc2767c81d9a1
#: ../../networking2.rst:6410
msgid ""
"In this figure, a public LB rule is created for the public IP 72.52.125.10 with "
"public port 80 and private port 81. The LB rule, created on the VPC virtual "
"router, is applied on the traffic coming from the Internet to the VMs on the Web "
"tier. On the Application tier two internal load balancing rules are created. An "
"internal LB rule for the guest IP 10.10.10.4 with load balancer port 23 and "
"instance port 25 is configured on the VM, InternalLBVM1. Another internal LB "
"rule for the guest IP 10.10.10.4 with load balancer port 45 and instance port 46 "
"is configured on the VM, InternalLBVM1. Another internal LB rule for the guest "
"IP 10.10.10.6, with load balancer port 23 and instance port 25 is configured on "
"the VM, InternalLBVM2."
msgstr ""

# b3129b5c753047129a01b1ba3c4fede8
#: ../../networking2.rst:6422
msgid "|vpc-lb.png|"
msgstr "|vpc-lb.png|"

# 8b1b1a74897143cb88a7542e79cf51f3
#: ../../networking2.rst:6429
msgid ""
"Internal LB and Public LB are mutually exclusive on a tier. If the tier has LB "
"on the public side, then it can't have the Internal LB."
msgstr ""

# 4388c29d8e264047afa9fe7ff8b116fd
#: ../../networking2.rst:6434
msgid "Internal LB is supported just on VPC networks in CloudStack 4.2 release."
msgstr ""

# f446d0a1aad04939840f2e711a509b3e
#: ../../networking2.rst:6439
msgid ""
"Only Internal LB VM can act as the Internal LB provider in CloudStack 4.2 "
"release."
msgstr ""

# f4b320548bdb4614952985433f8b1177
#: ../../networking2.rst:6444
msgid ""
"Network upgrade is not supported from the network offering with Internal LB to "
"the network offering with Public LB."
msgstr ""

# 264141b663754516b518d1f6d1a96ebf
#: ../../networking2.rst:6449
msgid "Multiple tiers can have internal LB support in a VPC."
msgstr ""

# f09c422386a34597a8def34515b103c9
#: ../../networking2.rst:6453
msgid "Only one tier can have Public LB support in a VPC."
msgstr ""

# 028d12b705c040d4a796b5085738d685
#: ../../networking2.rst:6456
msgid "Enabling Internal LB on a VPC Tier"
msgstr ""

# 7c0d2274b60242a58ed2cf1355a72079
#: ../../networking2.rst:6460
msgid ""
"Create a network offering, as given in :ref:`creating-net-offering-internal-lb`."
msgstr ""

# 6c4da6439e3f4b018afd1c51169ab257
#: ../../networking2.rst:6464
msgid ""
"Create an internal load balancing rule and apply, as given in :ref:`create-int-"
"lb-rule`."
msgstr ""

# 7632bb75de7b4419ab26471d1f3e2cdd
#: ../../networking2.rst:6470
msgid "Creating a Network Offering for Internal LB"
msgstr ""

# bb39964280e14e828cb77bd8faad4389
#: ../../networking2.rst:6472
msgid ""
"To have internal LB support on VPC, either use the default offering, "
"DefaultIsolatedNetworkOfferingForVpcNetworksWithInternalLB, or create a network "
"offering as follows:"
msgstr ""

# 8f9488a3121d483a90d04b721d6d1d67
#: ../../networking2.rst:6537
msgid ""
"**Supported Services**: Select Load Balancer. Select ``InternalLbVM`` from the "
"provider list."
msgstr ""

# 10f1614fb17846fc84ab119ba2e48c82
#: ../../networking2.rst:6542
msgid "**Load Balancer Type**: Select Internal LB from the drop-down."
msgstr ""

# 1554f48553a24d8eb75e184a1a3dcaae
#: ../../networking2.rst:6562
msgid "Creating an Internal LB Rule"
msgstr ""

# 7c93f86fe3d04b018ebc0f755fdd3bd9
#: ../../networking2.rst:6564
msgid ""
"When you create the Internal LB rule and applies to a VM, an Internal LB VM, "
"which is responsible for load balancing, is created."
msgstr ""

# c341cb78685b4d799b920d6abfc1379d
#: ../../networking2.rst:6567
msgid ""
"You can view the created Internal LB VM in the Instances page if you navigate to "
"**Infrastructure** > **Zones** > <zone\\_ name> > <physical\\_network\\_name> > "
"**Network Service Providers** > **Internal LB VM**. You can manage the Internal "
"LB VMs as and when required from the location."
msgstr ""

# bb074ba85b95485ab2000aa11bbf8f33
#: ../../networking2.rst:6590
msgid ""
"Locate the VPC for which you want to configure internal LB, then click Configure."
msgstr ""

# 9f89311df2d04728b293005448c4dc44
#: ../../networking2.rst:6598
msgid ""
"Locate the Tier for which you want to configure an internal LB rule, click "
"Internal LB."
msgstr ""

# a048cf82b55a4a65a79b907eddb27da1
#: ../../networking2.rst:6601
msgid "In the Internal LB page, click Add Internal LB."
msgstr ""

# ec4dcfcce0a24d839230f062df3b4b64
#: ../../networking2.rst:6605
msgid "In the dialog, specify the following:"
msgstr ""

# 74434a3d36fb484a804a01e12ce24764
#: ../../networking2.rst:6613
msgid ""
"**Description**: A short description of the rule that can be displayed to users."
msgstr ""

# daed72af843943e9baccd05bcb786a21
#: ../../networking2.rst:6618
msgid ""
"**Source IP Address**: (Optional) The source IP from which traffic originates. "
"The IP is acquired from the CIDR of that particular tier on which you want to "
"create the Internal LB rule. If not specified, the IP address is automatically "
"allocated from the network CIDR."
msgstr ""

# 15b760898c8e4743b7a45bdb78cc5d29
#: ../../networking2.rst:6624
msgid "For every Source IP, a new Internal LB VM is created for load balancing."
msgstr ""

# 7d4fda85029c411f98060e303e433ebe
#: ../../networking2.rst:6629
msgid ""
"**Source Port**: The port associated with the source IP. Traffic on this port is "
"load balanced."
msgstr ""

# b8760e9c1eb746b98a4deb723cad698b
#: ../../networking2.rst:6634
msgid "**Instance Port**: The port of the internal LB VM."
msgstr ""

# eb41a8a1275d4f319cf708bbc6cbd615
#: ../../networking2.rst:6655
msgid "Adding a Port Forwarding Rule on a VPC"
msgstr ""

# b7b954709aca4ed4b65909249a1445cf
#: ../../networking2.rst:6745
msgid ""
"**Public Port**: The port to which public traffic will be addressed on the IP "
"address you acquired in the previous step."
msgstr ""

# 3457f6b6eb9945b2adb0a5de7deafea8
#: ../../networking2.rst:6750
msgid ""
"**Private Port**: The port on which the instance is listening for forwarded "
"public traffic."
msgstr ""

# 109d7b5b794343e3b14449585d750125
#: ../../networking2.rst:6755
msgid "**Protocol**: The communication protocol in use between the two ports."
msgstr ""

# a52983a3295b440e854b8e8de723ab47
#: ../../networking2.rst:6760
msgid "TCP"
msgstr ""
"**Protocole**: Le protocole réseau que les sources utilisent pour envoyer le "
"trafic vers le segment. Les protocoles TCP et UDP sont généralement utilisés "
"pour l'échange de données et les communications avec l'utilisateur final. Le "
"protocole ICMP est généralement utilisé pour envoyer des messages d'erreur ou "
"des données de surveillance du réseau. All supporte tout le trafic. La dernière "
"option est de fournir le numéro de protocole."

# a80d548790614268b9a37014436e3b33
#: ../../networking2.rst:6764
msgid "UDP"
msgstr ""
"**Protocole**: Le protocole réseau que les sources utilisent pour envoyer le "
"trafic vers le segment. Les protocoles TCP et UDP sont généralement utilisés "
"pour l'échange de données et les communications avec l'utilisateur final. Le "
"protocole ICMP est généralement utilisé pour envoyer des messages d'erreur ou "
"des données de surveillance du réseau. All supporte tout le trafic. La dernière "
"option est de fournir le numéro de protocole."

# 3045d1ed30694200ab89150942fe8a6a
#: ../../networking2.rst:6768
msgid ""
"**Add VM**: Click Add VM. Select the name of the instance to which this rule "
"applies, and click Apply."
msgstr ""

# 4b9ed6535e914dd89e1a04c8c2f345d7
#: ../../networking2.rst:6771
msgid "You can test the rule by opening an SSH session to the instance."
msgstr ""

# 4a6c93a072f04111a01f85167fd2755d
#: ../../networking2.rst:6774
msgid "Removing Tiers"
msgstr "Retirer des segments"

# 5142d19ad4794b65970714b4e4bbbec5
#: ../../networking2.rst:6776
msgid ""
"You can remove a tier from a VPC. A removed tier cannot be revoked. When a tier "
"is removed, only the resources of the tier are expunged. All the network rules "
"(port forwarding, load balancing and staticNAT) and the IP addresses associated "
"to the tier are removed. The IP address still be belonging to the same VPC."
msgstr ""

# 7c041faaebfa4ddab0237d7749ac57b0
#: ../../networking2.rst:6802
msgid "The Configure VPC page is displayed. Locate the tier you want to work with."
msgstr ""

# df27c86ec4a94161b3370aae61a474f0
#: ../../networking2.rst:6807
msgid "Select the tier you want to remove."
msgstr ""

# 36316512ad134fdd8cf52cee54ea5230
#: ../../networking2.rst:6811
msgid "In the Network Details tab, click the Delete Network button. |del-tier.png|"
msgstr ""

# 50fe8c3d59b048c5b83145acbe8be4e5
#: ../../networking2.rst:6814
msgid "Click Yes to confirm. Wait for some time for the tier to be removed."
msgstr ""

# 2946ed6a189c43f58b6c443a883de36f
#: ../../networking2.rst:6817
msgid "Editing, Restarting, and Removing a Virtual Private Cloud"
msgstr ""

# 41e51cc9e9d14164a66fb7e95f9f8a12
#: ../../networking2.rst:6819
msgid "Ensure that all the tiers are removed before you remove a VPC."
msgstr ""

# 98e5e7fe7bff4cb18c826b8a17fbca71
#: ../../networking2.rst:6838
msgid "Select the VPC you want to work with."
msgstr ""

# fdc4b5db10a245f68c46b4793a5b052e
#: ../../networking2.rst:6842
msgid "In the Details tab, click the Remove VPC button |remove-vpc.png|"
msgstr ""

# 3fabd3a8fb6b4546887df7e7f8c4212c
#: ../../networking2.rst:6844
msgid "You can remove the VPC by also using the remove button in the Quick View."
msgstr ""

# 8f6ce6f0fc7943e8965aeb7c157eef28
#: ../../networking2.rst:6847
msgid ""
"You can edit the name and description of a VPC. To do that, select the VPC, then "
"click the Edit button. |edit-icon.png|"
msgstr ""

# 44868ef425a9478c9a51b13b823cb75d
#: ../../networking2.rst:6850
msgid ""
"To restart a VPC, select the VPC, then click the Restart button. |restart-vpc."
"png|"
msgstr ""
"Pour redémarrer un VPC, sélectionner le VPC puis cliquer sur le bouton "
"Redémarrer. |restart-vpc.png|"

# f535c4d4c6e542569b645467558a84ba
#: ../../networking2.rst:6854
msgid "Persistent Networks"
msgstr "Réseaux persistants"

# ac16a1f817024aa4ba3804fcab51f851
#: ../../networking2.rst:6856
msgid ""
"The network that you can provision without having to deploy any VMs on it is "
"called a persistent network. A persistent network can be part of a VPC or a non-"
"VPC environment."
msgstr ""
"Un réseau que vous pouvez provisionner sans avoir à déployer une quelconque VM "
"est appelé réseau persistant. Un réseau persistant peut faire partie d'un "
"environnement VPC ou non-VPC."

# 69a29ed2704f4f48b0796699ad7a36eb
#: ../../networking2.rst:6860
msgid ""
"When you create other types of network, a network is only a database entry until "
"the first VM is created on that network. When the first VM is created, a VLAN ID "
"is assigned and the network is provisioned. Also, when the last VM is destroyed, "
"the VLAN ID is released and the network is no longer available. With the "
"addition of persistent network, you will have the ability to create a network in "
"CloudStack in which physical devices can be deployed without having to run any "
"VMs. Additionally, you can deploy physical devices on that network."
msgstr ""
"Lorsque vous créez d'autres types de réseau, un réseau n'est qu'une entrée de "
"base de données jusqu'à ce que la première VM soit créée sur ce réseau. Lors de "
"la création de la première VM, un ID de VLAN est attribué et le réseau est "
"provisionné. En outre, lorsque la dernière VM est détruite, l'ID du VLAN est "
"libéré et le réseau n'est plus disponible. Avec l'ajout d'un réseau persistant, "
"vous aurez la possibilité de créer un réseau dans CloudStack dans lequel les "
"périphériques physiques peuvent être déployés sans avoir à exécuter une "
"quelconque machine virtuelle. En outre, vous pouvez déployer des périphériques "
"physiques sur ce réseau."

# 58f4be07725f415581616cb03772a7a7
#: ../../networking2.rst:6869
msgid ""
"One of the advantages of having a persistent network is that you can create a "
"VPC with a tier consisting of only physical devices. For example, you might "
"create a VPC for a three-tier application, deploy VMs for Web and Application "
"tier, and use physical machines for the Database tier. Another use case is that "
"if you are providing services by using physical hardware, you can define the "
"network as persistent and therefore even if all its VMs are destroyed the "
"services will not be discontinued."
msgstr ""
"L'un des avantages d'avoir un réseau persistant est de pouvoir créer un VPC avec "
"un segment composé uniquement de périphériques physiques. Par exemple, vous "
"pouvez créer un VPC pour une application à trois tiers, déployer des VM pour le "
"couche Web et Application et utiliser des machines physiques pour la couche Base "
"de données. Un autre cas d'utilisation est que si vous fournissez des services "
"en utilisant du matériel physique, vous pouvez définir le réseau comme "
"persistant et donc même si toutes ses machines virtuelles sont détruites, ses "
"services ne seront pas interrompus."

# 8ff007bee6954fe199b3c83d78392acf
#: ../../networking2.rst:6879
msgid "Persistent Network Considerations"
msgstr "Considérations sur le Réseau Persistant"

# f6f834bfef49425085d2d0742d6ef874
#: ../../networking2.rst:6883
msgid "Persistent network is designed for isolated networks."
msgstr "Le réseau persistant est conçu pour les réseaux isolés."

# 0bb5d0eb31464beaa3c07b2ff9af3aa2
#: ../../networking2.rst:6887
msgid "All default network offerings are non-persistent."
msgstr "Toutes les offres de réseau par défaut sont non-persistantes."

# 5051557b950f477e8d115a69bf8150d4
#: ../../networking2.rst:6891
msgid ""
"A network offering cannot be editable because changing it affects the behavior "
"of the existing networks that were created using this network offering."
msgstr ""
"Une offre de réseau ne peut pas être éditable parce la changer affectent le "
"fonctionnement des réseaux existants qui ont été créés en utilisant cette offre "
"de service."

# 593697221e614fe980bca6c00979e531
#: ../../networking2.rst:6897
msgid ""
"When you create a guest network, the network offering that you select defines "
"the network persistence. This in turn depends on whether persistent network is "
"enabled in the selected network offering."
msgstr ""
"Lorsque vous créez un réseau invité, l'offre de réseau que vous sélectionnez "
"définie la persistance du réseau. Cela dépend en fait si la persistance du "
"réseau est activée dans l'offre de réseau sélectionnée."

# 34302861eff548dd9e9007020f1c927b
#: ../../networking2.rst:6903
msgid ""
"An existing network can be made persistent by changing its network offering to "
"an offering that has the Persistent option enabled. While setting this property, "
"even if the network has no running VMs, the network is provisioned."
msgstr ""
"Un réseau existant peut devenir persistant en changeant son offre de réseau pour "
"une offre qui a l'option de persistance activée. Lorsque cette propriété est "
"configurée, même si le réseau n'a pas de VM en fonctionnement, le réseau est "
"provisionné."

# e3974307d7cd464eb0a6028ee8f57e4b
#: ../../networking2.rst:6910
msgid ""
"An existing network can be made non-persistent by changing its network offering "
"to an offering that has the Persistent option disabled. If the network has no "
"running VMs, during the next network garbage collection run the network is shut "
"down."
msgstr ""
"Un réseau existant peut devenir non-persistent en changeant son offre de réseau "
"pour une offre qui a l'option de persistance désactivée. SI le réseau n'a pas de "
"VM en fonctionnement durant le prochain lancement du garbage collector, il sera "
"stoppé."

# 1c9032badc034107b57250169a03a890
#: ../../networking2.rst:6917
msgid ""
"When the last VM on a network is destroyed, the network garbage collector checks "
"if the network offering associated with the network is persistent, and shuts "
"down the network only if it is non-persistent."
msgstr ""
"Lorsque la dernière VM d'un réseau est détruite, le garbage collector du réseau "
"vérifie si l'offre de réseau associée avec le réseau est persistante et arrête "
"ce réseau seulement si c'est non-persistant."

# 56e305bc255e4c999e504e5acb010e4f
#: ../../networking2.rst:6923
msgid "Creating a Persistent Guest Network"
msgstr "Créer un réseau invité Persistant."

# 8ce284f6e33a44e5860a579e00f4fc80
#: ../../networking2.rst:6925
msgid "To create a persistent network, perform the following:"
msgstr "Pour créer un réseau persistant, suivre les instructions suivantes :"

# e3ce54a0de2342309210a549828f25b0
#: ../../networking2.rst:6929
msgid "Create a network offering with the Persistent option enabled."
msgstr "Créer une offre réseau avec l'option Persistant activée."

# 916c1c8c0ef34df2868a5a38c4dd609a
#: ../../networking2.rst:6931
msgid ""
"See `\"Creating a New Network Offering\" <networking.html#creating-a-new-network-"
"offering>`_."
msgstr ""
"Voir `\"Créer une Nouvelle Offre Réseau\" <networking.html#creating-a-new-"
"network-offering>`_."

# 2fd5e35855fe4fa4bae6d7cc0d53b7d8
#: ../../networking2.rst:6935
msgid "Select Network from the left navigation pane."
msgstr "Sélectionnez le réseau depuis le panneau de navigation à gauche."

# 37e16c8d0d9044dbb0f2d02677062c8d
#: ../../networking2.rst:6939
msgid "Select the guest network that you want to offer this network service to."
msgstr ""
"Sélectionnez le réseau invité avec lequel vous voulez offrir ce service réseau."

# 5fbd5c95b15941c29f95b337f8ebade8
#: ../../networking2.rst:6944
msgid "Click the Edit button."
msgstr "Cliquer sur le bouton Editer."

# 706e3f3239cb45f2a6f669847cf5c0ff
#: ../../networking2.rst:6948
msgid ""
"From the Network Offering drop-down, select the persistent network offering you "
"have just created."
msgstr ""
"Dans la liste de sélection Offre Réseau, sélectionnez l'offre de réseau "
"persistant que vous venez à l'instant de créer."