/*-------------------------------------------------------------------------
 *
 * nodeHash.c
 *	  Routines to hash relations for hashjoin
 *
 * Portions Copyright (c) 2006-2008, Greenplum inc
 * Portions Copyright (c) 2012-Present VMware, Inc. or its affiliates.
 * Portions Copyright (c) 1996-2023, PostgreSQL Global Development Group
 * Portions Copyright (c) 1994, Regents of the University of California
 *
 *
 * IDENTIFICATION
 *	  src/backend/executor/nodeHash.c
 *
 * See note on parallelism in nodeHashjoin.c.
 *
 *-------------------------------------------------------------------------
 */
/*
 * INTERFACE ROUTINES
 *		MultiExecHash	- generate an in-memory hash table of the relation
 *		ExecInitHash	- initialize node and subnodes
 *		ExecEndHash		- shutdown node and subnodes
 */

#include "postgres.h"

#include <math.h>
#include <limits.h>

#include "access/hash.h"
#include "access/htup_details.h"
#include "access/parallel.h"
#include "catalog/pg_statistic.h"
#include "commands/tablespace.h"
#include "executor/execdebug.h"
#include "executor/hashjoin.h"
#include "executor/nodeHash.h"
#include "executor/nodeHashjoin.h"
#include "executor/nodeRuntimeFilter.h"
#include "miscadmin.h"
#include "pgstat.h"
#include "port/atomics.h"
#include "port/pg_bitutils.h"
#include "utils/dynahash.h"
#include "utils/guc.h"
#include "utils/lsyscache.h"
#include "utils/faultinjector.h"
#include "utils/syscache.h"

#include "cdb/cdbexplain.h"
#include "cdb/cdbutil.h"
#include "cdb/cdbvars.h"

#include "utils/memutils.h"
#include "utils/syscache.h"

#include "lib/bloomfilter.h"

static void ExecHashIncreaseNumBatches(HashJoinTable hashtable);
static void ExecHashIncreaseNumBuckets(HashJoinTable hashtable);
static void ExecParallelHashIncreaseNumBatches(HashJoinTable hashtable);
static void ExecParallelHashIncreaseNumBuckets(HashJoinTable hashtable);
static void ExecHashBuildSkewHash(HashJoinTable hashtable, Hash *node,
								  int mcvsToUse);
static void ExecHashSkewTableInsert(HashState *hashState,
									HashJoinTable hashtable,
									TupleTableSlot *slot,
									uint32 hashvalue,
									int bucketNumber);
static void ExecHashRemoveNextSkewBucket(HashState *hashState, HashJoinTable hashtable);

static void ExecHashTableExplainEnd(PlanState *planstate, struct StringInfoData *buf);
static void
ExecHashTableExplainBatches(HashJoinTable   hashtable,
                            StringInfo      buf,
                            int             ibatch_begin,
                            int             ibatch_end,
                            const char     *title);
static void *dense_alloc(HashJoinTable hashtable, Size size);
static HashJoinTuple ExecParallelHashTupleAlloc(HashJoinTable hashtable,
												size_t size,
												dsa_pointer *shared);
static void MultiExecPrivateHash(HashState *node);
static void MultiExecParallelHash(HashState *node);
static inline HashJoinTuple ExecParallelHashFirstTuple(HashJoinTable hashtable,
													   int bucketno);
static inline HashJoinTuple ExecParallelHashNextTuple(HashJoinTable hashtable,
													  HashJoinTuple tuple);
static inline void ExecParallelHashPushTuple(dsa_pointer_atomic *head,
											 HashJoinTuple tuple,
											 dsa_pointer tuple_shared);
static void ExecParallelHashJoinSetUpBatches(HashJoinTable hashtable, int nbatch);
static void ExecParallelHashEnsureBatchAccessors(HashJoinTable hashtable);
static void ExecParallelHashRepartitionFirst(HashJoinTable hashtable);
static void ExecParallelHashRepartitionRest(HashJoinTable hashtable);
static HashMemoryChunk ExecParallelHashPopChunkQueue(HashJoinTable hashtable,
													 dsa_pointer *shared);
static bool ExecParallelHashTuplePrealloc(HashJoinTable hashtable,
										  int batchno,
										  size_t size);
static void ExecParallelHashMergeCounters(HashJoinTable hashtable);
static void ExecParallelHashCloseBatchAccessors(HashJoinTable hashtable);
static void AddTupleValuesIntoRF(HashState *node, TupleTableSlot *slot);
static void PushdownRuntimeFilter(HashState *node);
static void FreeRuntimeFilter(HashState *node);
static void ResetRuntimeFilter(HashState *node);

/* ----------------------------------------------------------------
 *		ExecHash
 *
 *		stub for pro forma compliance
 * ----------------------------------------------------------------
 */
static TupleTableSlot *
ExecHash(PlanState *pstate)
{
	elog(ERROR, "Hash node does not support ExecProcNode call convention");
	return NULL;
}

/* ----------------------------------------------------------------
 *		MultiExecHash
 *
 *		build hash table for hashjoin, doing partitioning if more
 *		than one batch is required.
 * ----------------------------------------------------------------
 */
Node *
MultiExecHash(HashState *node)
{
	bool parallel = node->parallel_state != NULL;

	/* must provide our own instrumentation support */
	if (node->ps.instrument)
		InstrStartNode(node->ps.instrument);

	if (node->parallel_state != NULL)
		MultiExecParallelHash(node);
	else
		MultiExecPrivateHash(node);

	RFBuildFinishCallback(node->rfstate, parallel);

	/* must provide our own instrumentation support */
	if (node->ps.instrument)
		InstrStopNode(node->ps.instrument, node->hashtable->partialTuples);

	/*
	 * We do not return the hash table directly because it's not a subtype of
	 * Node, and so would violate the MultiExecProcNode API.  Instead, our
	 * parent Hashjoin node is expected to know how to fish it out of our node
	 * state.  Ugly but not really worth cleaning up, since Hashjoin knows
	 * quite a bit more about Hash besides that.
	 */
	return NULL;
}

/* ----------------------------------------------------------------
 *		MultiExecPrivateHash
 *
 *		parallel-oblivious version, building a backend-private
 *		hash table and (if necessary) batch files.
 * ----------------------------------------------------------------
 */
static void
MultiExecPrivateHash(HashState *node)
{
	PlanState  *outerNode;
	List	   *hashkeys;
	HashJoinTable hashtable;
	TupleTableSlot *slot;
	ExprContext *econtext;
	uint32		hashvalue;

	/*
	 * get state info from node
	 */
	outerNode = outerPlanState(node);
	hashtable = node->hashtable;

	/*
	 * set expression context
	 */
	hashkeys = node->hashkeys;
	econtext = node->ps.ps_ExprContext;

	SIMPLE_FAULT_INJECTOR("multi_exec_hash_large_vmem");

	/*
	 * Get all tuples from the node below the Hash node and insert into the
	 * hash table (or temp files).
	 */
	for (;;)
	{
		slot = ExecProcNode(outerNode);
		if (TupIsNull(slot))
		{
			if (gp_enable_runtime_filter_pushdown && node->filters)
				PushdownRuntimeFilter(node);
			break;
		}

		if (gp_enable_runtime_filter_pushdown && node->filters)
			AddTupleValuesIntoRF(node, slot);

		/* We have to compute the hash value */
		econtext->ecxt_outertuple = slot;
		bool hashkeys_null = false;
		if (ExecHashGetHashValue(node, hashtable, econtext, hashkeys,
								 false, hashtable->keepNulls,
								 &hashvalue, &hashkeys_null))
		{
			int			bucketNumber;

			bucketNumber = ExecHashGetSkewBucket(hashtable, hashvalue);
			if (bucketNumber != INVALID_SKEW_BUCKET_NO)
			{
				/* It's a skew tuple, so put it into that hash table */
				ExecHashSkewTableInsert(node, hashtable, slot, hashvalue,
										bucketNumber);
				hashtable->skewTuples += 1;
			}
			else
			{
				/* Not subject to skew optimization, so insert normally */
				ExecHashTableInsert(node, hashtable, slot, hashvalue);
			}
			hashtable->totalTuples += 1;
		}

		if (hashkeys_null)
		{
			node->hs_hashkeys_null = true;
			if (node->hs_quit_if_hashkeys_null)
			{
				ExecSquelchNode(outerNode, false);
				return;
			}
		}
	}

	/* Now we have set up all the initial batches & primary overflow batches. */
	hashtable->nbatch_outstart = hashtable->nbatch;

	/* resize the hash table if needed (NTUP_PER_BUCKET exceeded) */
	if (hashtable->nbuckets != hashtable->nbuckets_optimal)
		ExecHashIncreaseNumBuckets(hashtable);

	/* Account for the buckets in spaceUsed (reported in EXPLAIN ANALYZE) */
	hashtable->spaceUsed += hashtable->nbuckets * sizeof(HashJoinTuple);
	if (hashtable->spaceUsed > hashtable->spacePeak)
		hashtable->spacePeak = hashtable->spaceUsed;

	hashtable->partialTuples = hashtable->totalTuples;
}

/* ----------------------------------------------------------------
 *		MultiExecParallelHash
 *
 *		parallel-aware version, building a shared hash table and
 *		(if necessary) batch files using the combined effort of
 *		a set of co-operating backends.
 * ----------------------------------------------------------------
 */
static void
MultiExecParallelHash(HashState *node)
{
	ParallelHashJoinState *pstate;
	PlanState  *outerNode;
	List	   *hashkeys;
	HashJoinTable hashtable;
	TupleTableSlot *slot;
	ExprContext *econtext;
	uint32		hashvalue;
	Barrier    *build_barrier;
	int			i;

	/*
	 * get state info from node
	 */
	outerNode = outerPlanState(node);
	hashtable = node->hashtable;

	/*
	 * set expression context
	 */
	hashkeys = node->hashkeys;
	econtext = node->ps.ps_ExprContext;

	/*
	 * Synchronize the parallel hash table build.  At this stage we know that
	 * the shared hash table has been or is being set up by
	 * ExecHashTableCreate(), but we don't know if our peers have returned
	 * from there or are here in MultiExecParallelHash(), and if so how far
	 * through they are.  To find out, we check the build_barrier phase then
	 * and jump to the right step in the build algorithm.
	 */
	pstate = hashtable->parallel_state;
	build_barrier = &pstate->build_barrier;
	Assert(BarrierPhase(build_barrier) >= PHJ_BUILD_ALLOCATE);
	switch (BarrierPhase(build_barrier))
	{
		case PHJ_BUILD_ALLOCATE:

			/*
			 * Either I just allocated the initial hash table in
			 * ExecHashTableCreate(), or someone else is doing that.  Either
			 * way, wait for everyone to arrive here so we can proceed.
			 */
			BarrierArriveAndWait(build_barrier, WAIT_EVENT_HASH_BUILD_ALLOCATE);
			/* Fall through. */

		case PHJ_BUILD_HASH_INNER:

			/*
			 * It's time to begin hashing, or if we just arrived here then
			 * hashing is already underway, so join in that effort.  While
			 * hashing we have to be prepared to help increase the number of
			 * batches or buckets at any time, and if we arrived here when
			 * that was already underway we'll have to help complete that work
			 * immediately so that it's safe to access batches and buckets
			 * below.
			 */
			if (PHJ_GROW_BATCHES_PHASE(BarrierAttach(&pstate->grow_batches_barrier)) !=
				PHJ_GROW_BATCHES_ELECT)
				ExecParallelHashIncreaseNumBatches(hashtable);
			if (PHJ_GROW_BUCKETS_PHASE(BarrierAttach(&pstate->grow_buckets_barrier)) !=
				PHJ_GROW_BUCKETS_ELECT)
				ExecParallelHashIncreaseNumBuckets(hashtable);
			ExecParallelHashEnsureBatchAccessors(hashtable);
			ExecParallelHashTableSetCurrentBatch(hashtable, 0);
			for (;;)
			{
				bool		hashkeys_null = false;

				/* CBDB_PARALLEL: Siblings must have found null value. */
				if (pstate->phs_lasj_has_null)
				{
					node->hs_hashkeys_null = true;
					ExecSquelchNode(outerNode, false);
					break;
				}

				slot = ExecProcNode(outerNode);
				if (TupIsNull(slot))
					break;

				econtext->ecxt_outertuple = slot;
				if (ExecHashGetHashValue(node, hashtable, econtext, hashkeys,
										 false, hashtable->keepNulls,
										 &hashvalue, &hashkeys_null))
					ExecParallelHashTableInsert(hashtable, slot, hashvalue);
				hashtable->partialTuples++;

				if (node->hs_quit_if_hashkeys_null && hashkeys_null)
				{
					/* CBDB_PARALLEL:
					 * If we are LASJ and found NULL value by ourself or sibling processes had
					 * found NULL values, quit and tell siblings to quit if possible.
					 *
					 * It's safe to fetch and set phs_lasj_has_null without lock here and at
					 * other places. As it's a atomic boolean value. And we should avoid more locks in HashJion Impl.
					 * If other processes miss it here and some others set it at the same time, just bypass
					 * and we may get it at the next Hash batch.
					 * If we missed it across all batches, we will know it when PHJ_BUILD_HASHING_INNER
					 * ends with the help of build_barrier.
					 * If we never participated in building hash table, check it when hash table
					 * creation job is finished.
					 */
					pstate->phs_lasj_has_null = true;
					pg_write_barrier();
					node->hs_hashkeys_null = true;
					ExecSquelchNode(outerNode, false);
					break;
				}
			}

			/* CBDB_PARALLEL: No need to flush tuples if phs_lasj_has_null. */
			/*
			 * Make sure that any tuples we wrote to disk are visible to
			 * others before anyone tries to load them.
			 */
			if (!pstate->phs_lasj_has_null)
			{
				for (i = 0; i < hashtable->nbatch; ++i)
					sts_end_write(hashtable->batches[i].inner_tuples);
			}

			/*
			 * Update shared counters.  We need an accurate total tuple count
			 * to control the empty table optimization.
			 */
			ExecParallelHashMergeCounters(hashtable);

			BarrierDetach(&pstate->grow_buckets_barrier);
			BarrierDetach(&pstate->grow_batches_barrier);

			/*
			 * Wait for everyone to finish building and flushing files and
			 * counters.
			 */
			if (BarrierArriveAndWait(build_barrier,
									 WAIT_EVENT_HASH_BUILD_HASH_INNER))
			{
				/*
				 * Elect one backend to disable any further growth.  Batches
				 * are now fixed.  While building them we made sure they'd fit
				 * in our memory budget when we load them back in later (or we
				 * tried to do that and gave up because we detected extreme
				 * skew).
				 */
				pstate->growth = PHJ_GROWTH_DISABLED;
				/* In case we didn't find null values ourself. */
				if (pstate->phs_lasj_has_null)
				{
					node->hs_hashkeys_null = true;
					return;
				}
			}
	}

	/* In case we didn't participate in PHJ_BUILD_HASHING_INNER */
	pg_memory_barrier();
	if (pstate->phs_lasj_has_null)
	{
		node->hs_hashkeys_null = true;
		return;
	}

	/*
	 * We're not yet attached to a batch.  We all agree on the dimensions and
	 * number of inner tuples (for the empty table optimization).
	 */
	hashtable->curbatch = -1;
	hashtable->nbuckets = pstate->nbuckets;
	hashtable->log2_nbuckets = my_log2(hashtable->nbuckets);
	hashtable->totalTuples = pstate->total_tuples;

	/*
	 * Unless we're completely done and the batch state has been freed, make
	 * sure we have accessors.
	 */
	if (BarrierPhase(build_barrier) < PHJ_BUILD_FREE)
		ExecParallelHashEnsureBatchAccessors(hashtable);

	/*
	 * The next synchronization point is in ExecHashJoin's HJ_BUILD_HASHTABLE
	 * case, which will bring the build phase to PHJ_BUILD_RUN (if it isn't
	 * there already).
	 */
	Assert(BarrierPhase(build_barrier) == PHJ_BUILD_HASH_OUTER ||
		   BarrierPhase(build_barrier) == PHJ_BUILD_RUN ||
		   BarrierPhase(build_barrier) == PHJ_BUILD_FREE);
}

/* ----------------------------------------------------------------
 *		ExecInitHash
 *
 *		Init routine for Hash node
 * ----------------------------------------------------------------
 */
HashState *
ExecInitHash(Hash *node, EState *estate, int eflags)
{
	HashState  *hashstate;

	/* check for unsupported flags */
	Assert(!(eflags & (EXEC_FLAG_BACKWARD | EXEC_FLAG_MARK)));

	/*
	 * create state structure
	 */
	hashstate = makeNode(HashState);
	hashstate->ps.plan = (Plan *) node;
	hashstate->ps.state = estate;
	hashstate->ps.ExecProcNode = ExecHash;
	hashstate->hashtable = NULL;
	hashstate->hashkeys = NIL;	/* will be set by parent HashJoin */

	hashstate->rfstate = NULL;

	/*
	 * Miscellaneous initialization
	 *
	 * create expression context for node
	 */
	ExecAssignExprContext(estate, &hashstate->ps);

	/*
	 * initialize child nodes
	 */
	outerPlanState(hashstate) = ExecInitNode(outerPlan(node), estate, eflags);

	/*
	 * initialize our result slot and type. No need to build projection
	 * because this node doesn't do projections.
	 */
	ExecInitResultTupleSlotTL(&hashstate->ps, &TTSOpsMinimalTuple);
	hashstate->ps.ps_ProjInfo = NULL;

	/*
	 * initialize child expressions
	 */
	Assert(node->plan.qual == NIL);
	hashstate->hashkeys =
		ExecInitExprList(node->hashkeys, (PlanState *) hashstate);

	return hashstate;
}

/* ---------------------------------------------------------------
 *		ExecEndHash
 *
 *		clean up routine for Hash node
 * ----------------------------------------------------------------
 */
void
ExecEndHash(HashState *node)
{
	PlanState  *outerPlan;

	/*
	 * free exprcontext
	 */
	ExecFreeExprContext(&node->ps);

	/*
	 * shut down the subplan
	 */
	outerPlan = outerPlanState(node);
	ExecEndNode(outerPlan);

	if (node->filters)
		FreeRuntimeFilter(node);
}


/* ----------------------------------------------------------------
 *		ExecHashTableCreate
 *
 *		create an empty hashtable data structure for hashjoin.
 * ----------------------------------------------------------------
 */
HashJoinTable
ExecHashTableCreate(HashState *state, HashJoinState *hjstate,
					List *hashOperators, List *hashCollations,
					bool keepNulls, uint64 operatorMemKB)
{
	Hash	   *node;
	HashJoinTable hashtable;
	Plan	   *outerNode;
	size_t		space_allowed;
	int			nbuckets;
	int			nbatch;
	double		rows;
	int			num_skew_mcvs;
	int			log2_nbuckets;
	int			nkeys;
	int			i;
	ListCell   *ho;
	ListCell   *hc;
	MemoryContext oldcxt;

	/*
	 * Get information about the size of the relation to be hashed (it's the
	 * "outer" subtree of this node, but the inner relation of the hashjoin).
	 * Compute the appropriate size of the hash table.
	 */
	node = (Hash *) state->ps.plan;
	outerNode = outerPlan(node);

	/*
	 * If this is shared hash table with a partial plan, then we can't use
	 * outerNode->plan_rows to estimate its size.  We need an estimate of the
	 * total number of rows across all copies of the partial plan.
	 */
	rows = node->plan.parallel_aware ? node->rows_total : outerNode->plan_rows;

	ExecChooseHashTableSize(rows, outerNode->plan_width,
							OidIsValid(node->skewTable),
							operatorMemKB,
							state->parallel_state != NULL,
							state->parallel_state != NULL ?
							state->parallel_state->nparticipants - 1 : 0,
							&space_allowed,
							&nbuckets, &nbatch, &num_skew_mcvs);

	/* nbuckets must be a power of 2 */
	log2_nbuckets = my_log2(nbuckets);
	Assert(nbuckets == (1 << log2_nbuckets));

	/*
	 * Initialize the hash table control block.
	 *
	 * The hashtable control block is just palloc'd from the executor's
	 * per-query memory context.  Everything else should be kept inside the
	 * subsidiary hashCxt, batchCxt or spillCxt.
	 */
	hashtable = palloc_object(HashJoinTableData);
	hashtable->nbuckets = nbuckets;
	hashtable->nbuckets_original = nbuckets;
	hashtable->nbuckets_optimal = nbuckets;
	hashtable->log2_nbuckets = log2_nbuckets;
	hashtable->log2_nbuckets_optimal = log2_nbuckets;
	hashtable->buckets.unshared = NULL;
	hashtable->keepNulls = keepNulls;
	hashtable->skewEnabled = false;
	hashtable->skewBucket = NULL;
	hashtable->skewBucketLen = 0;
	hashtable->nSkewBuckets = 0;
	hashtable->skewBucketNums = NULL;
	hashtable->nbatch = nbatch;
	hashtable->curbatch = 0;
	hashtable->nbatch_original = nbatch;
	hashtable->nbatch_outstart = nbatch;
	hashtable->growEnabled = true;
	hashtable->totalTuples = 0;
	hashtable->partialTuples = 0;
	hashtable->skewTuples = 0;
	hashtable->innerBatchFile = NULL;
	hashtable->outerBatchFile = NULL;
	hashtable->spaceUsed = 0;
	hashtable->spacePeak = 0;
	hashtable->spaceAllowed = space_allowed;
	hashtable->spaceUsedSkew = 0;
	hashtable->spaceAllowedSkew =
		hashtable->spaceAllowed * SKEW_HASH_MEM_PERCENT / 100;
	hashtable->stats = NULL;
	hashtable->eagerlyReleased = false;
	hashtable->hjstate = hjstate;
	hashtable->first_pass = true;
	hashtable->work_set = NULL;

	hashtable->chunks = NULL;
	hashtable->current_chunk = NULL;
	hashtable->parallel_state = state->parallel_state;
	hashtable->area = state->ps.state->es_query_dsa;
	hashtable->batches = NULL;

#ifdef HJDEBUG
	printf("Hashjoin %p: initial nbatch = %d, nbuckets = %d\n",
		   hashtable, nbatch, nbuckets);
#endif

	/*
	 * Create temporary memory contexts in which to keep the hashtable working
	 * storage.  See notes in executor/hashjoin.h.
	 */
	hashtable->hashCxt = AllocSetContextCreate(CurrentMemoryContext,
											   "HashTableContext",
											   ALLOCSET_DEFAULT_SIZES);

	hashtable->batchCxt = AllocSetContextCreate(hashtable->hashCxt,
												"HashBatchContext",
												ALLOCSET_DEFAULT_SIZES);

	/* CDB: track temp buf file allocations in separate context */
	hashtable->bfCxt = AllocSetContextCreate(CurrentMemoryContext,
											 "hbbfcxt",
											 ALLOCSET_DEFAULT_SIZES);

	hashtable->spillCxt = AllocSetContextCreate(hashtable->hashCxt,
												"HashSpillContext",
												ALLOCSET_DEFAULT_SIZES);

	/* Allocate data that will live for the life of the hashjoin */

	oldcxt = MemoryContextSwitchTo(hashtable->hashCxt);

	/*
	 * Get info about the hash functions to be used for each hash key. Also
	 * remember whether the join operators are strict.
	 */
	nkeys = list_length(hashOperators);
	hashtable->outer_hashfunctions = palloc_array(FmgrInfo, nkeys);
	hashtable->inner_hashfunctions = palloc_array(FmgrInfo, nkeys);
	hashtable->hashStrict = palloc_array(bool, nkeys);
	hashtable->collations = palloc_array(Oid, nkeys);
	i = 0;
	forboth(ho, hashOperators, hc, hashCollations)
	{
		Oid			hashop = lfirst_oid(ho);
		Oid			left_hashfn;
		Oid			right_hashfn;

		if (!get_op_hash_functions(hashop, &left_hashfn, &right_hashfn))
			elog(ERROR, "could not find hash function for hash operator %u",
				 hashop);
		fmgr_info(left_hashfn, &hashtable->outer_hashfunctions[i]);
		fmgr_info(right_hashfn, &hashtable->inner_hashfunctions[i]);
		hashtable->hashStrict[i] = op_strict(hashop);
		hashtable->collations[i] = lfirst_oid(hc);
		i++;
	}

	if (nbatch > 1 && hashtable->parallel_state == NULL)
	{
		MemoryContext oldctx;

		/*
		 * allocate and initialize the file arrays in hashCxt (not needed for
		 * parallel case which uses shared tuplestores instead of raw files)
		 */
		oldctx = MemoryContextSwitchTo(hashtable->spillCxt);

		hashtable->innerBatchFile = palloc0_array(BufFile *, nbatch);
		hashtable->outerBatchFile = palloc0_array(BufFile *, nbatch);

		MemoryContextSwitchTo(oldctx);

		/* The files will not be opened until needed... */
		/* ... but make sure we have temp tablespaces established for them */
		PrepareTempTablespaces();
	}

	MemoryContextSwitchTo(oldcxt);

	if (hashtable->parallel_state)
	{
		ParallelHashJoinState *pstate = hashtable->parallel_state;
		Barrier    *build_barrier;
		Barrier	   *sync_barrier;

		/*
		 * Attach to the build barrier.  The corresponding detach operation is
		 * in ExecHashTableDetach.  Note that we won't attach to the
		 * batch_barrier for batch 0 yet.  We'll attach later and start it out
		 * in PHJ_BATCH_PROBE phase, because batch 0 is allocated up front and
		 * then loaded while hashing (the standard hybrid hash join
		 * algorithm), and we'll coordinate that using build_barrier.
		 */
		build_barrier = &pstate->build_barrier;
		sync_barrier = &pstate->sync_barrier;

		BarrierAttach(build_barrier);

		if (((Hash *) state->ps.plan)->sync_barrier)
			BarrierArriveAndWait(sync_barrier, WAIT_EVENT_PARALLEL_FINISH);

		/*
		 * So far we have no idea whether there are any other participants,
		 * and if so, what phase they are working on.  The only thing we care
		 * about at this point is whether someone has already created the
		 * SharedHashJoinBatch objects and the hash table for batch 0.  One
		 * backend will be elected to do that now if necessary.
		 */
		if (BarrierPhase(build_barrier) == PHJ_BUILD_ELECT &&
			BarrierArriveAndWait(build_barrier, WAIT_EVENT_HASH_BUILD_ELECT))
		{
			pstate->nbatch = nbatch;
			pstate->space_allowed = space_allowed;
			pstate->growth = PHJ_GROWTH_OK;

			/* Set up the shared state for coordinating batches. */
			ExecParallelHashJoinSetUpBatches(hashtable, nbatch);

			/*
			 * Allocate batch 0's hash table up front so we can load it
			 * directly while hashing.
			 */
			pstate->nbuckets = nbuckets;
			ExecParallelHashTableAlloc(hashtable, 0);
		}

		/*
		 * The next Parallel Hash synchronization point is in
		 * MultiExecParallelHash(), which will progress it all the way to
		 * PHJ_BUILD_RUN.  The caller must not return control from this
		 * executor node between now and then.
		 */
	}
	else
	{
		/*
		 * Prepare context for the first-scan space allocations; allocate the
		 * hashbucket array therein, and set each bucket "empty".
		 */
		MemoryContextSwitchTo(hashtable->batchCxt);

		hashtable->buckets.unshared = palloc0_array(HashJoinTuple, nbuckets);

		/*
		 * Set up for skew optimization, if possible and there's a need for
		 * more than one batch.  (In a one-batch join, there's no point in
		 * it.)
		 */
		if (nbatch > 1)
			ExecHashBuildSkewHash(hashtable, node, num_skew_mcvs);

		MemoryContextSwitchTo(oldcxt);
	}

	return hashtable;
}


/*
 * Compute appropriate size for hashtable given the estimated size of the
 * relation to be hashed (number of rows and average row width).
 *
 * This is exported so that the planner's costsize.c can use it.
 */

/* Target bucket loading (tuples per bucket) */
/*
 * CDB: we now use gp_hashjoin_tuples_per_bucket
 * #define NTUP_PER_BUCKET			1
 */

void
ExecChooseHashTableSize(double ntuples, int tupwidth, bool useskew,
                        uint64 operatorMemKB,
						bool try_combined_hash_mem,
						int parallel_workers,
						size_t *space_allowed,
						int *numbuckets,
						int *numbatches,
						int *num_skew_mcvs)
{
	int			tupsize;
	double		inner_rel_bytes;
	size_t		hash_table_bytes;
	size_t		bucket_bytes;
	size_t		max_pointers;
	int			nbatch = 1;
	int			nbuckets;
	double		dbuckets;

	/* Force a plausible relation size if no info */
	if (ntuples <= 0.0)
		ntuples = 1000.0;

	/*
	 * Estimate tupsize based on footprint of tuple in hashtable... note this
	 * does not allow for any palloc overhead.  The manipulations of spaceUsed
	 * don't count palloc overhead either.
	 */
	tupsize = ExecHashRowSize(tupwidth);
	inner_rel_bytes = ntuples * tupsize;

	/*
	 * Compute in-memory hashtable size limit from GUCs.
	 */
	hash_table_bytes = operatorMemKB * 1024L;

	/*
	 * Parallel Hash tries to use the combined hash_mem of all workers to
	 * avoid the need to batch.  If that won't work, it falls back to hash_mem
	 * per worker and tries to process batches in parallel.
	 */
	if (try_combined_hash_mem && parallel_workers > 0)
	{
		/* Careful, this could overflow size_t */
		double		newlimit;

		/* CBDB_PARALLEL_FIXME: if we enable pg style parallel some day, we should reconsider it. */
		newlimit = (double) hash_table_bytes * (double) parallel_workers;
		newlimit = Min(newlimit, (double) SIZE_MAX);
		hash_table_bytes = (size_t) newlimit;
	}

	*space_allowed = hash_table_bytes;

	/*
	 * If skew optimization is possible, estimate the number of skew buckets
	 * that will fit in the memory allowed, and decrement the assumed space
	 * available for the main hash table accordingly.
	 *
	 * We make the optimistic assumption that each skew bucket will contain
	 * one inner-relation tuple.  If that turns out to be low, we will recover
	 * at runtime by reducing the number of skew buckets.
	 *
	 * hashtable->skewBucket will have up to 8 times as many HashSkewBucket
	 * pointers as the number of MCVs we allow, since ExecHashBuildSkewHash
	 * will round up to the next power of 2 and then multiply by 4 to reduce
	 * collisions.
	 */
	if (useskew)
	{
		size_t		bytes_per_mcv;
		size_t		skew_mcvs;

		/*----------
		 * Compute number of MCVs we could hold in hash_table_bytes
		 *
		 * Divisor is:
		 * size of a hash tuple +
		 * worst-case size of skewBucket[] per MCV +
		 * size of skewBucketNums[] entry +
		 * size of skew bucket struct itself
		 *----------
		 */
		bytes_per_mcv = tupsize +
			(8 * sizeof(HashSkewBucket *)) +
			sizeof(int) +
			SKEW_BUCKET_OVERHEAD;
		skew_mcvs = hash_table_bytes / bytes_per_mcv;

		/*
		 * Now scale by SKEW_HASH_MEM_PERCENT (we do it in this order so as
		 * not to worry about size_t overflow in the multiplication)
		 */
		skew_mcvs = (skew_mcvs * SKEW_HASH_MEM_PERCENT) / 100;

		/* Now clamp to integer range */
		skew_mcvs = Min(skew_mcvs, INT_MAX);

		*num_skew_mcvs = (int) skew_mcvs;

		/* Reduce hash_table_bytes by the amount needed for the skew table */
		if (skew_mcvs > 0)
			hash_table_bytes -= skew_mcvs * bytes_per_mcv;
	}
	else
		*num_skew_mcvs = 0;

	/*
	 * Set nbuckets to achieve an average bucket load of gp_hashjoin_tuples_per_bucket when
	 * memory is filled, assuming a single batch; but limit the value so that
	 * the pointer arrays we'll try to allocate do not exceed hash_table_bytes
	 * nor MaxAllocSize.
	 *
	 * Note that both nbuckets and nbatch must be powers of 2 to make
	 * ExecHashGetBucketAndBatch fast.
	 */
	max_pointers = hash_table_bytes / sizeof(HashJoinTuple);
	max_pointers = Min(max_pointers, MaxAllocSize / sizeof(HashJoinTuple));
	/* If max_pointers isn't a power of 2, must round it down to one */
	max_pointers = pg_prevpower2_size_t(max_pointers);

	/* Also ensure we avoid integer overflow in nbatch and nbuckets */
	/* (this step is redundant given the current value of MaxAllocSize) */
	max_pointers = Min(max_pointers, INT_MAX / 2 + 1);

	dbuckets = ceil(ntuples / gp_hashjoin_tuples_per_bucket);
	dbuckets = Min(dbuckets, max_pointers);
	nbuckets = (int) dbuckets;
	/* don't let nbuckets be really small, though ... */
	nbuckets = Max(nbuckets, 1024);
	/* ... and force it to be a power of 2. */
	nbuckets = pg_nextpower2_32(nbuckets);

	/*
	 * If there's not enough space to store the projected number of tuples and
	 * the required bucket headers, we will need multiple batches.
	 */
	bucket_bytes = sizeof(HashJoinTuple) * nbuckets;
	if (inner_rel_bytes + bucket_bytes > hash_table_bytes)
	{
		/* We'll need multiple batches */
		size_t		sbuckets;
		double		dbatch;
		int			minbatch;
		size_t		bucket_size;

		/*
		 * If Parallel Hash with combined hash_mem would still need multiple
		 * batches, we'll have to fall back to regular hash_mem budget.
		 */
		if (try_combined_hash_mem)
		{
			ExecChooseHashTableSize(ntuples, tupwidth, useskew,
                                    operatorMemKB,
									false, parallel_workers,
									space_allowed,
									numbuckets,
									numbatches,
									num_skew_mcvs);
			return;
		}

		/*
		 * Estimate the number of buckets we'll want to have when hash_mem is
		 * entirely full.  Each bucket will contain a bucket pointer plus
		 * gp_hashjoin_tuples_per_bucket tuples, whose projected size already includes
		 * overhead for the hash code, pointer to the next tuple, etc.
		 */
		bucket_size = (tupsize * gp_hashjoin_tuples_per_bucket + sizeof(HashJoinTuple));
		if (hash_table_bytes < bucket_size)
			sbuckets = 1;
		else
			sbuckets = pg_nextpower2_size_t(hash_table_bytes / bucket_size);
		sbuckets = Min(sbuckets, max_pointers);
		nbuckets = (int) sbuckets;
		nbuckets = pg_nextpower2_32(nbuckets);
		bucket_bytes = nbuckets * sizeof(HashJoinTuple);

		/*
		 * Buckets are simple pointers to hashjoin tuples, while tupsize
		 * includes the pointer, hash code, and MinimalTupleData.  So buckets
		 * should never really exceed 25% of hash_mem (even for
		 * gp_hashjoin_tuples_per_bucket=1); except maybe for hash_mem values that are not
		 * 2^N bytes, where we might get more because of doubling. So let's
		 * look for 50% here.
		 */
		Assert(bucket_bytes <= hash_table_bytes / 2);

		/* Calculate required number of batches. */
		dbatch = ceil(inner_rel_bytes / (hash_table_bytes - bucket_bytes));
		dbatch = Min(dbatch, max_pointers);
		minbatch = (int) dbatch;
		nbatch = pg_nextpower2_32(Max(2, minbatch));

		/*
		 * Check to see if we're capping the number of workfiles we allow per
		 * query
		 */
		if (gp_workfile_limit_files_per_query > 0)
		{
			int			nbatch_lower = nbatch;

			/*
			 * We create two files per batch during spilling - one for outer
			 * and one of inner side. Lower the nbatch if necessary to fit
			 * under that limit. Don't go below two batches, because in that
			 * case we're basically disabling spilling.
			 */
			while ((nbatch_lower * 2 > gp_workfile_limit_files_per_query) && (nbatch_lower > 2))
			{
				nbatch_lower >>= 1;
			}

			Assert(nbatch_lower <= nbatch);
			if (nbatch_lower != nbatch)
			{
				/*
				 * ExecChooseHashTableSize() is a hot function which is not only called by executor,
				 * but also by planner. Planner will call this function when calcualting cost for
				 * each join path. The number of join path grow exponentially with the number of
				 * table. As a result, do not using elog(LOG) to avoid generating too many logs.
				 */
				elog(DEBUG1, "HashJoin: Too many batches computed: nbatch=%d. gp_workfile_limit_files_per_query=%d, using nbatch=%d instead",
					 nbatch, gp_workfile_limit_files_per_query, nbatch_lower);
				nbatch = nbatch_lower;
			}
		}
	}
	else
	{
		/* We expect the hashtable to fit in memory, we want to use
		 * more buckets if we have memory to spare */
		double		dbuckets_lower;
		double		dbuckets_upper;

		/* divide our tuple row-count estimate by our the number of
		 * tuples we'd like in a bucket: this produces a small bucket
		 * count independent of our work_mem setting */
		dbuckets_lower = (double)ntuples / (double)gp_hashjoin_tuples_per_bucket;

		/* if we have work_mem to spare, we'd like to use it -- so
		 * divide up our memory evenly (see the spill case above) */
		dbuckets_upper = (double)hash_table_bytes / ((double)tupsize * gp_hashjoin_tuples_per_bucket);

		/* we'll use our "lower" work_mem independent guess as a lower
		 * limit; but if we've got memory to spare we'll take the mean
		 * of the lower-limit and the upper-limit */
		if (dbuckets_upper > dbuckets_lower)
			dbuckets = (dbuckets_lower + dbuckets_upper)/2.0;
		else
			dbuckets = dbuckets_lower;

		dbuckets = ceil(dbuckets);
		dbuckets = Min(dbuckets, max_pointers);

		/*
		 * Both nbuckets and nbatch must be powers of 2 to make
		 * ExecHashGetBucketAndBatch fast.  We already fixed nbatch; now inflate
		 * nbuckets to the next larger power of 2.  We also force nbuckets to not
		 * be real small, by starting the search at 2^10.  (Note: above we made
		 * sure that nbuckets is not more than INT_MAX / 2, so this loop cannot
		 * overflow, nor can the final shift to recalculate nbuckets.)
		 */
		nbuckets = Max((int) dbuckets, 1024);
		nbuckets = 1 << my_log2(nbuckets);

		nbatch = 1;
	}

	Assert(nbuckets > 0);
	Assert(nbatch > 0);

	Assert(nbuckets > 0);
	Assert(nbatch > 0);

	*numbuckets = nbuckets;
	*numbatches = nbatch;
}


/* ----------------------------------------------------------------
 *		ExecHashTableDestroy
 *
 *		destroy a hash table
 * ----------------------------------------------------------------
 */
void
ExecHashTableDestroy(HashState *hashState, HashJoinTable hashtable)
{
	int			i;

	Assert(hashtable);
	Assert(!hashtable->eagerlyReleased);

	/*
	 * Make sure all the temp files are closed.
	 * GPDB supports rescan of hashjoin, the batch0 can still have temp files.
	 */
	if (hashtable->innerBatchFile != NULL)
	{
		for (i = 0; i < hashtable->nbatch; i++)
		{
			if (hashtable->innerBatchFile[i])
				BufFileClose(hashtable->innerBatchFile[i]);
			if (hashtable->outerBatchFile[i])
				BufFileClose(hashtable->outerBatchFile[i]);
			hashtable->innerBatchFile[i] = NULL;
			hashtable->outerBatchFile[i] = NULL;
		}
	}

	if (hashtable->work_set != NULL)
	{
		workfile_mgr_close_set(hashtable->work_set);
		hashtable->work_set = NULL;
	}

	/* Release working memory (batchCxt is a child, so it goes away too) */
	MemoryContextDelete(hashtable->hashCxt);

	/*
	 * If HashJoin find that the tuple it will return is NULL, it may squelch itself and its children.
	 * But there are some statistics(e.g. nbuckets, nbatch) maintained by the hash table being required during an explain analyze.
	 * Squelch HashJoin will call this function so that we can't simply call pfree and set hash table to NULL here,
	 * otherwise the statistics will be lost.
	 */
}

/*
 * ExecHashIncreaseNumBatches
 *		increase the original number of batches in order to reduce
 *		current memory consumption
 */
static void
ExecHashIncreaseNumBatches(HashJoinTable hashtable)
{
	int			oldnbatch = hashtable->nbatch;
	int			curbatch = hashtable->curbatch;
	int			nbatch;
	long		ninmemory;
	long		nfreed;
	HashMemoryChunk oldchunks;
	Size		spaceUsedBefore = hashtable->spaceUsed;
	Size		spaceFreed = 0;
	HashJoinTableStats *stats = hashtable->stats;

	/* do nothing if we've decided to shut off growth */
	if (!hashtable->growEnabled)
		return;

	/* safety check to avoid overflow */
	if (oldnbatch > Min(INT_MAX / 2, MaxAllocSize / (sizeof(void *) * 2)))
		return;

	/* A reusable hash table can only respill during first pass */
	AssertImply(hashtable->hjstate->reuse_hashtable, hashtable->first_pass);

	nbatch = oldnbatch * 2;
	Assert(nbatch > 1);

#ifdef HJDEBUG
	printf("Hashjoin %p: increasing nbatch to %d because space = %zu\n",
		   hashtable, nbatch, hashtable->spaceUsed);
#endif

	if (hashtable->innerBatchFile == NULL)
	{
		MemoryContext oldcxt = MemoryContextSwitchTo(hashtable->spillCxt);

		/* we had no file arrays before */
		hashtable->innerBatchFile = palloc0_array(BufFile *, nbatch);
		hashtable->outerBatchFile = palloc0_array(BufFile *, nbatch);

		MemoryContextSwitchTo(oldcxt);

		/* time to establish the temp tablespaces, too */
		PrepareTempTablespaces();
	}
	else
	{
		/* enlarge arrays and zero out added entries */
		hashtable->innerBatchFile = repalloc0_array(hashtable->innerBatchFile, BufFile *, oldnbatch, nbatch);
		hashtable->outerBatchFile = repalloc0_array(hashtable->outerBatchFile, BufFile *, oldnbatch, nbatch);
	}

	/* EXPLAIN ANALYZE batch statistics */
	if (stats && stats->nbatchstats < nbatch)
	{
		Size		sz = nbatch * sizeof(stats->batchstats[0]);

		stats->batchstats =
			(HashJoinBatchStats *) repalloc(stats->batchstats, sz);
		sz = (nbatch - stats->nbatchstats) * sizeof(stats->batchstats[0]);
		memset(stats->batchstats + stats->nbatchstats, 0, sz);
		stats->nbatchstats = nbatch;
	}
	hashtable->nbatch = nbatch;

	/*
	 * Scan through the existing hash table entries and dump out any that are
	 * no longer of the current batch.
	 */
	ninmemory = nfreed = 0;

	/* If know we need to resize nbuckets, we can do it while rebatching. */
	if (hashtable->nbuckets_optimal != hashtable->nbuckets)
	{
		/* we never decrease the number of buckets */
		Assert(hashtable->nbuckets_optimal > hashtable->nbuckets);

		hashtable->nbuckets = hashtable->nbuckets_optimal;
		hashtable->log2_nbuckets = hashtable->log2_nbuckets_optimal;

		hashtable->buckets.unshared =
			repalloc_array(hashtable->buckets.unshared,
						   HashJoinTuple, hashtable->nbuckets);
	}

	/*
	 * We will scan through the chunks directly, so that we can reset the
	 * buckets now and not have to keep track which tuples in the buckets have
	 * already been processed. We will free the old chunks as we go.
	 */
	memset(hashtable->buckets.unshared, 0,
		   sizeof(HashJoinTuple) * hashtable->nbuckets);
	oldchunks = hashtable->chunks;
	hashtable->chunks = NULL;

	/* so, let's scan through the old chunks, and all tuples in each chunk */
	while (oldchunks != NULL)
	{
		HashMemoryChunk nextchunk = oldchunks->next.unshared;

		/* position within the buffer (up to oldchunks->used) */
		size_t		idx = 0;

		/* process all tuples stored in this chunk (and then free it) */
		while (idx < oldchunks->used)
		{
			HashJoinTuple hashTuple = (HashJoinTuple) (HASH_CHUNK_DATA(oldchunks) + idx);
			MinimalTuple tuple = HJTUPLE_MINTUPLE(hashTuple);
			int			hashTupleSize = (HJTUPLE_OVERHEAD + tuple->t_len);
			int			bucketno;
			int			batchno;

			ninmemory++;
			ExecHashGetBucketAndBatch(hashtable, hashTuple->hashvalue,
									  &bucketno, &batchno);

			if (batchno == curbatch)
			{
				/* keep tuple in memory - copy it into the new chunk */
				HashJoinTuple copyTuple;

				copyTuple = (HashJoinTuple) dense_alloc(hashtable, hashTupleSize);
				memcpy(copyTuple, hashTuple, hashTupleSize);

				/* and add it back to the appropriate bucket */
				copyTuple->next.unshared = hashtable->buckets.unshared[bucketno];
				hashtable->buckets.unshared[bucketno] = copyTuple;
			}
			else
			{
				/* dump it out */
				Assert(batchno > curbatch);
				ExecHashJoinSaveTuple(NULL,
									  HJTUPLE_MINTUPLE(hashTuple),
									  hashTuple->hashvalue,
									  hashtable,
									  &hashtable->innerBatchFile[batchno],
									  hashtable->bfCxt);

				hashtable->spaceUsed -= hashTupleSize;
				spaceFreed += hashTupleSize;
				if (stats)
					stats->batchstats[batchno].spillspace_in += hashTupleSize;

				nfreed++;
			}

			/* next tuple in this chunk */
			idx += MAXALIGN(hashTupleSize);

			/* allow this loop to be cancellable */
			CHECK_FOR_INTERRUPTS();
		}

		/* we're done with this chunk - free it and proceed to the next one */
		pfree(oldchunks);
		oldchunks = nextchunk;
	}

#ifdef HJDEBUG
	printf("Hashjoin %p: freed %ld of %ld tuples, space now %zu\n",
		   hashtable, nfreed, ninmemory, hashtable->spaceUsed);
#endif

	/* Update work_mem high-water mark and amount spilled. */
	if (stats)
	{
		stats->workmem_max = Max(stats->workmem_max, spaceUsedBefore);
		stats->batchstats[curbatch].spillspace_out += spaceFreed;
		stats->batchstats[curbatch].spillrows_out += nfreed;
	}

	/*
	 * If we dumped out either all or none of the tuples in the table, disable
	 * further expansion of nbatch.  This situation implies that we have
	 * enough tuples of identical hashvalues to overflow spaceAllowed.
	 * Increasing nbatch will not fix it since there's no way to subdivide the
	 * group any more finely. We have to just gut it out and hope the server
	 * has enough RAM.
	 */
	if (nfreed == 0 || nfreed == ninmemory)
	{
		hashtable->growEnabled = false;
#ifdef HJDEBUG
		printf("Hashjoin %p: disabling further increase of nbatch\n",
			   hashtable);
#endif
	}
}

/*
 * ExecParallelHashIncreaseNumBatches
 *		Every participant attached to grow_batches_barrier must run this
 *		function when it observes growth == PHJ_GROWTH_NEED_MORE_BATCHES.
 */
static void
ExecParallelHashIncreaseNumBatches(HashJoinTable hashtable)
{
	ParallelHashJoinState *pstate = hashtable->parallel_state;

	Assert(BarrierPhase(&pstate->build_barrier) == PHJ_BUILD_HASH_INNER);

	/*
	 * It's unlikely, but we need to be prepared for new participants to show
	 * up while we're in the middle of this operation so we need to switch on
	 * barrier phase here.
	 */
	switch (PHJ_GROW_BATCHES_PHASE(BarrierPhase(&pstate->grow_batches_barrier)))
	{
		case PHJ_GROW_BATCHES_ELECT:

			/*
			 * Elect one participant to prepare to grow the number of batches.
			 * This involves reallocating or resetting the buckets of batch 0
			 * in preparation for all participants to begin repartitioning the
			 * tuples.
			 */
			if (BarrierArriveAndWait(&pstate->grow_batches_barrier,
									 WAIT_EVENT_HASH_GROW_BATCHES_ELECT))
			{
				dsa_pointer_atomic *buckets;
				ParallelHashJoinBatch *old_batch0;
				int			new_nbatch;
				int			i;

				/* Move the old batch out of the way. */
				old_batch0 = hashtable->batches[0].shared;
				pstate->old_batches = pstate->batches;
				pstate->old_nbatch = hashtable->nbatch;
				pstate->batches = InvalidDsaPointer;

				/* Free this backend's old accessors. */
				ExecParallelHashCloseBatchAccessors(hashtable);

				/* Figure out how many batches to use. */
				if (hashtable->nbatch == 1)
				{
					/*
					 * We are going from single-batch to multi-batch.  We need
					 * to switch from one large combined memory budget to the
					 * regular hash_mem budget.
					 */
					pstate->space_allowed = get_hash_memory_limit();

					/*
					 * The combined hash_mem of all participants wasn't
					 * enough. Therefore one batch per participant would be
					 * approximately equivalent and would probably also be
					 * insufficient.  So try two batches per participant,
					 * rounded up to a power of two.
					 */
					new_nbatch = pg_nextpower2_32(pstate->nparticipants * 2);
				}
				else
				{
					/*
					 * We were already multi-batched.  Try doubling the number
					 * of batches.
					 */
					new_nbatch = hashtable->nbatch * 2;
				}

				/* Allocate new larger generation of batches. */
				Assert(hashtable->nbatch == pstate->nbatch);
				ExecParallelHashJoinSetUpBatches(hashtable, new_nbatch);
				Assert(hashtable->nbatch == pstate->nbatch);

				/* Replace or recycle batch 0's bucket array. */
				if (pstate->old_nbatch == 1)
				{
					double		dtuples;
					double		dbuckets;
					int			new_nbuckets;

					/*
					 * We probably also need a smaller bucket array.  How many
					 * tuples do we expect per batch, assuming we have only
					 * half of them so far?  Normally we don't need to change
					 * the bucket array's size, because the size of each batch
					 * stays the same as we add more batches, but in this
					 * special case we move from a large batch to many smaller
					 * batches and it would be wasteful to keep the large
					 * array.
					 */
					dtuples = (old_batch0->ntuples * 2.0) / new_nbatch;
					dbuckets = ceil(dtuples / gp_hashjoin_tuples_per_bucket);
					dbuckets = Min(dbuckets,
								   MaxAllocSize / sizeof(dsa_pointer_atomic));
					new_nbuckets = (int) dbuckets;
					new_nbuckets = Max(new_nbuckets, 1024);
					new_nbuckets = pg_nextpower2_32(new_nbuckets);
					dsa_free(hashtable->area, old_batch0->buckets);
					hashtable->batches[0].shared->buckets =
						dsa_allocate(hashtable->area,
									 sizeof(dsa_pointer_atomic) * new_nbuckets);
					buckets = (dsa_pointer_atomic *)
						dsa_get_address(hashtable->area,
										hashtable->batches[0].shared->buckets);
					for (i = 0; i < new_nbuckets; ++i)
						dsa_pointer_atomic_init(&buckets[i], InvalidDsaPointer);
					pstate->nbuckets = new_nbuckets;
				}
				else
				{
					/* Recycle the existing bucket array. */
					hashtable->batches[0].shared->buckets = old_batch0->buckets;
					buckets = (dsa_pointer_atomic *)
						dsa_get_address(hashtable->area, old_batch0->buckets);
					for (i = 0; i < hashtable->nbuckets; ++i)
						dsa_pointer_atomic_write(&buckets[i], InvalidDsaPointer);
				}

				/* Move all chunks to the work queue for parallel processing. */
				pstate->chunk_work_queue = old_batch0->chunks;

				/* Disable further growth temporarily while we're growing. */
				pstate->growth = PHJ_GROWTH_DISABLED;
			}
			else
			{
				/* All other participants just flush their tuples to disk. */
				ExecParallelHashCloseBatchAccessors(hashtable);
			}
			/* Fall through. */

		case PHJ_GROW_BATCHES_REALLOCATE:
			/* Wait for the above to be finished. */
			BarrierArriveAndWait(&pstate->grow_batches_barrier,
								 WAIT_EVENT_HASH_GROW_BATCHES_REALLOCATE);
			/* Fall through. */

		case PHJ_GROW_BATCHES_REPARTITION:
			/* Make sure that we have the current dimensions and buckets. */
			ExecParallelHashEnsureBatchAccessors(hashtable);
			ExecParallelHashTableSetCurrentBatch(hashtable, 0);
			/* Then partition, flush counters. */
			ExecParallelHashRepartitionFirst(hashtable);
			ExecParallelHashRepartitionRest(hashtable);
			ExecParallelHashMergeCounters(hashtable);
			/* Wait for the above to be finished. */
			BarrierArriveAndWait(&pstate->grow_batches_barrier,
								 WAIT_EVENT_HASH_GROW_BATCHES_REPARTITION);
			/* Fall through. */

		case PHJ_GROW_BATCHES_DECIDE:

			/*
			 * Elect one participant to clean up and decide whether further
			 * repartitioning is needed, or should be disabled because it's
			 * not helping.
			 */
			if (BarrierArriveAndWait(&pstate->grow_batches_barrier,
									 WAIT_EVENT_HASH_GROW_BATCHES_DECIDE))
			{
				ParallelHashJoinBatch *old_batches;
				bool		space_exhausted = false;
				bool		extreme_skew_detected = false;

				/* Make sure that we have the current dimensions and buckets. */
				ExecParallelHashEnsureBatchAccessors(hashtable);
				ExecParallelHashTableSetCurrentBatch(hashtable, 0);

				old_batches = dsa_get_address(hashtable->area, pstate->old_batches);

				/* Are any of the new generation of batches exhausted? */
				for (int i = 0; i < hashtable->nbatch; ++i)
				{
					ParallelHashJoinBatch *batch;
					ParallelHashJoinBatch *old_batch;
					int			parent;

					batch = hashtable->batches[i].shared;
					if (batch->space_exhausted ||
						batch->estimated_size > pstate->space_allowed)
						space_exhausted = true;

					parent = i % pstate->old_nbatch;
					old_batch = NthParallelHashJoinBatch(old_batches, parent);
					if (old_batch->space_exhausted ||
						batch->estimated_size > pstate->space_allowed)
					{
						/*
						 * Did this batch receive ALL of the tuples from its
						 * parent batch?  That would indicate that further
						 * repartitioning isn't going to help (the hash values
						 * are probably all the same).
						 */
						if (batch->ntuples == hashtable->batches[parent].shared->old_ntuples)
							extreme_skew_detected = true;
					}
				}

				/* Don't keep growing if it's not helping or we'd overflow. */
				if (extreme_skew_detected || hashtable->nbatch >= INT_MAX / 2)
					pstate->growth = PHJ_GROWTH_DISABLED;
				else if (space_exhausted)
					pstate->growth = PHJ_GROWTH_NEED_MORE_BATCHES;
				else
					pstate->growth = PHJ_GROWTH_OK;

				/* Free the old batches in shared memory. */
				dsa_free(hashtable->area, pstate->old_batches);
				pstate->old_batches = InvalidDsaPointer;
			}
			/* Fall through. */

		case PHJ_GROW_BATCHES_FINISH:
			/* Wait for the above to complete. */
			BarrierArriveAndWait(&pstate->grow_batches_barrier,
								 WAIT_EVENT_HASH_GROW_BATCHES_FINISH);
	}
}

/*
 * Repartition the tuples currently loaded into memory for inner batch 0
 * because the number of batches has been increased.  Some tuples are retained
 * in memory and some are written out to a later batch.
 */
static void
ExecParallelHashRepartitionFirst(HashJoinTable hashtable)
{
	dsa_pointer chunk_shared;
	HashMemoryChunk chunk;

	Assert(hashtable->nbatch == hashtable->parallel_state->nbatch);

	while ((chunk = ExecParallelHashPopChunkQueue(hashtable, &chunk_shared)))
	{
		size_t		idx = 0;

		/* Repartition all tuples in this chunk. */
		while (idx < chunk->used)
		{
			HashJoinTuple hashTuple = (HashJoinTuple) (HASH_CHUNK_DATA(chunk) + idx);
			MinimalTuple tuple = HJTUPLE_MINTUPLE(hashTuple);
			HashJoinTuple copyTuple;
			dsa_pointer shared;
			int			bucketno;
			int			batchno;

			ExecHashGetBucketAndBatch(hashtable, hashTuple->hashvalue,
									  &bucketno, &batchno);

			Assert(batchno < hashtable->nbatch);
			if (batchno == 0)
			{
				/* It still belongs in batch 0.  Copy to a new chunk. */
				copyTuple =
					ExecParallelHashTupleAlloc(hashtable,
											   HJTUPLE_OVERHEAD + tuple->t_len,
											   &shared);
				copyTuple->hashvalue = hashTuple->hashvalue;
				memcpy(HJTUPLE_MINTUPLE(copyTuple), tuple, tuple->t_len);
				ExecParallelHashPushTuple(&hashtable->buckets.shared[bucketno],
										  copyTuple, shared);
			}
			else
			{
				size_t		tuple_size =
					MAXALIGN(HJTUPLE_OVERHEAD + tuple->t_len);

				/* It belongs in a later batch. */
				hashtable->batches[batchno].estimated_size += tuple_size;
				sts_puttuple(hashtable->batches[batchno].inner_tuples,
							 &hashTuple->hashvalue, tuple);
			}

			/* Count this tuple. */
			++hashtable->batches[0].old_ntuples;
			++hashtable->batches[batchno].ntuples;

			idx += MAXALIGN(HJTUPLE_OVERHEAD +
							HJTUPLE_MINTUPLE(hashTuple)->t_len);
		}

		/* Free this chunk. */
		dsa_free(hashtable->area, chunk_shared);

		CHECK_FOR_INTERRUPTS();
	}
}

/*
 * Help repartition inner batches 1..n.
 */
static void
ExecParallelHashRepartitionRest(HashJoinTable hashtable)
{
	ParallelHashJoinState *pstate = hashtable->parallel_state;
	int			old_nbatch = pstate->old_nbatch;
	SharedTuplestoreAccessor **old_inner_tuples;
	ParallelHashJoinBatch *old_batches;
	int			i;

	/* Get our hands on the previous generation of batches. */
	old_batches = (ParallelHashJoinBatch *)
		dsa_get_address(hashtable->area, pstate->old_batches);
	old_inner_tuples = palloc0_array(SharedTuplestoreAccessor *, old_nbatch);
	for (i = 1; i < old_nbatch; ++i)
	{
		ParallelHashJoinBatch *shared =
			NthParallelHashJoinBatch(old_batches, i);

		old_inner_tuples[i] = sts_attach(ParallelHashJoinBatchInner(shared),
										 hashtable->hjstate->worker_id,
										 &pstate->fileset);
	}

	/* Join in the effort to repartition them. */
	for (i = 1; i < old_nbatch; ++i)
	{
		MinimalTuple tuple;
		uint32		hashvalue;

		/* Scan one partition from the previous generation. */
		sts_begin_parallel_scan(old_inner_tuples[i]);
		while ((tuple = sts_parallel_scan_next(old_inner_tuples[i], &hashvalue)))
		{
			size_t		tuple_size = MAXALIGN(HJTUPLE_OVERHEAD + tuple->t_len);
			int			bucketno;
			int			batchno;

			/* Decide which partition it goes to in the new generation. */
			ExecHashGetBucketAndBatch(hashtable, hashvalue, &bucketno,
									  &batchno);

			hashtable->batches[batchno].estimated_size += tuple_size;
			++hashtable->batches[batchno].ntuples;
			++hashtable->batches[i].old_ntuples;

			/* Store the tuple its new batch. */
			sts_puttuple(hashtable->batches[batchno].inner_tuples,
						 &hashvalue, tuple);

			CHECK_FOR_INTERRUPTS();
		}
		sts_end_parallel_scan(old_inner_tuples[i]);
	}

	pfree(old_inner_tuples);
}

/*
 * Transfer the backend-local per-batch counters to the shared totals.
 */
static void
ExecParallelHashMergeCounters(HashJoinTable hashtable)
{
	ParallelHashJoinState *pstate = hashtable->parallel_state;
	int			i;

	LWLockAcquire(&pstate->lock, LW_EXCLUSIVE);
	pstate->total_tuples = 0;
	for (i = 0; i < hashtable->nbatch; ++i)
	{
		ParallelHashJoinBatchAccessor *batch = &hashtable->batches[i];

		batch->shared->size += batch->size;
		batch->shared->estimated_size += batch->estimated_size;
		batch->shared->ntuples += batch->ntuples;
		batch->shared->old_ntuples += batch->old_ntuples;
		batch->size = 0;
		batch->estimated_size = 0;
		batch->ntuples = 0;
		batch->old_ntuples = 0;
		pstate->total_tuples += batch->shared->ntuples;
	}
	LWLockRelease(&pstate->lock);
}

/*
 * ExecHashIncreaseNumBuckets
 *		increase the original number of buckets in order to reduce
 *		number of tuples per bucket
 */
static void
ExecHashIncreaseNumBuckets(HashJoinTable hashtable)
{
	HashMemoryChunk chunk;

	/* do nothing if not an increase (it's called increase for a reason) */
	if (hashtable->nbuckets >= hashtable->nbuckets_optimal)
		return;

#ifdef HJDEBUG
	printf("Hashjoin %p: increasing nbuckets %d => %d\n",
		   hashtable, hashtable->nbuckets, hashtable->nbuckets_optimal);
#endif

	hashtable->nbuckets = hashtable->nbuckets_optimal;
	hashtable->log2_nbuckets = hashtable->log2_nbuckets_optimal;

	Assert(hashtable->nbuckets > 1);
	Assert(hashtable->nbuckets <= (INT_MAX / 2));
	Assert(hashtable->nbuckets == (1 << hashtable->log2_nbuckets));

	/*
	 * Just reallocate the proper number of buckets - we don't need to walk
	 * through them - we can walk the dense-allocated chunks (just like in
	 * ExecHashIncreaseNumBatches, but without all the copying into new
	 * chunks)
	 */
	hashtable->buckets.unshared =
		repalloc_array(hashtable->buckets.unshared,
					   HashJoinTuple, hashtable->nbuckets);

	memset(hashtable->buckets.unshared, 0,
		   hashtable->nbuckets * sizeof(HashJoinTuple));

	/* scan through all tuples in all chunks to rebuild the hash table */
	for (chunk = hashtable->chunks; chunk != NULL; chunk = chunk->next.unshared)
	{
		/* process all tuples stored in this chunk */
		size_t		idx = 0;

		while (idx < chunk->used)
		{
			HashJoinTuple hashTuple = (HashJoinTuple) (HASH_CHUNK_DATA(chunk) + idx);
			int			bucketno;
			int			batchno;

			ExecHashGetBucketAndBatch(hashtable, hashTuple->hashvalue,
									  &bucketno, &batchno);

			/* add the tuple to the proper bucket */
			hashTuple->next.unshared = hashtable->buckets.unshared[bucketno];
			hashtable->buckets.unshared[bucketno] = hashTuple;

			/* advance index past the tuple */
			idx += MAXALIGN(HJTUPLE_OVERHEAD +
							HJTUPLE_MINTUPLE(hashTuple)->t_len);
		}

		/* allow this loop to be cancellable */
		CHECK_FOR_INTERRUPTS();
	}
}

static void
ExecParallelHashIncreaseNumBuckets(HashJoinTable hashtable)
{
	ParallelHashJoinState *pstate = hashtable->parallel_state;
	int			i;
	HashMemoryChunk chunk;
	dsa_pointer chunk_s;

	Assert(BarrierPhase(&pstate->build_barrier) == PHJ_BUILD_HASH_INNER);

	/*
	 * It's unlikely, but we need to be prepared for new participants to show
	 * up while we're in the middle of this operation so we need to switch on
	 * barrier phase here.
	 */
	switch (PHJ_GROW_BUCKETS_PHASE(BarrierPhase(&pstate->grow_buckets_barrier)))
	{
		case PHJ_GROW_BUCKETS_ELECT:
			/* Elect one participant to prepare to increase nbuckets. */
			if (BarrierArriveAndWait(&pstate->grow_buckets_barrier,
									 WAIT_EVENT_HASH_GROW_BUCKETS_ELECT))
			{
				size_t		size;
				dsa_pointer_atomic *buckets;

				/* Double the size of the bucket array. */
				pstate->nbuckets *= 2;
				size = pstate->nbuckets * sizeof(dsa_pointer_atomic);
				hashtable->batches[0].shared->size += size / 2;
				dsa_free(hashtable->area, hashtable->batches[0].shared->buckets);
				hashtable->batches[0].shared->buckets =
					dsa_allocate(hashtable->area, size);
				buckets = (dsa_pointer_atomic *)
					dsa_get_address(hashtable->area,
									hashtable->batches[0].shared->buckets);
				for (i = 0; i < pstate->nbuckets; ++i)
					dsa_pointer_atomic_init(&buckets[i], InvalidDsaPointer);

				/* Put the chunk list onto the work queue. */
				pstate->chunk_work_queue = hashtable->batches[0].shared->chunks;

				/* Clear the flag. */
				pstate->growth = PHJ_GROWTH_OK;
			}
			/* Fall through. */

		case PHJ_GROW_BUCKETS_REALLOCATE:
			/* Wait for the above to complete. */
			BarrierArriveAndWait(&pstate->grow_buckets_barrier,
								 WAIT_EVENT_HASH_GROW_BUCKETS_REALLOCATE);
			/* Fall through. */

		case PHJ_GROW_BUCKETS_REINSERT:
			/* Reinsert all tuples into the hash table. */
			ExecParallelHashEnsureBatchAccessors(hashtable);
			ExecParallelHashTableSetCurrentBatch(hashtable, 0);
			while ((chunk = ExecParallelHashPopChunkQueue(hashtable, &chunk_s)))
			{
				size_t		idx = 0;

				while (idx < chunk->used)
				{
					HashJoinTuple hashTuple = (HashJoinTuple) (HASH_CHUNK_DATA(chunk) + idx);
					dsa_pointer shared = chunk_s + HASH_CHUNK_HEADER_SIZE + idx;
					int			bucketno;
					int			batchno;

					ExecHashGetBucketAndBatch(hashtable, hashTuple->hashvalue,
											  &bucketno, &batchno);
					Assert(batchno == 0);

					/* add the tuple to the proper bucket */
					ExecParallelHashPushTuple(&hashtable->buckets.shared[bucketno],
											  hashTuple, shared);

					/* advance index past the tuple */
					idx += MAXALIGN(HJTUPLE_OVERHEAD +
									HJTUPLE_MINTUPLE(hashTuple)->t_len);
				}

				/* allow this loop to be cancellable */
				CHECK_FOR_INTERRUPTS();
			}
			BarrierArriveAndWait(&pstate->grow_buckets_barrier,
								 WAIT_EVENT_HASH_GROW_BUCKETS_REINSERT);
	}
}

/*
 * ExecHashTableInsert
 *		insert a tuple into the hash table depending on the hash value
 *		it may just go to a temp file for later batches
 *
 * Note: the passed TupleTableSlot may contain a regular, minimal, or virtual
 * tuple; the minimal case in particular is certain to happen while reloading
 * tuples from batch files.  We could save some cycles in the regular-tuple
 * case by not forcing the slot contents into minimal form; not clear if it's
 * worth the messiness required.
 *
 * Returns true if the tuple belonged to this batch and was inserted to
 * the in-memory hash table, or false if it belonged to a later batch and
 * was pushed to a temp file.
 */
bool
ExecHashTableInsert(HashState *hashState, HashJoinTable hashtable,
					TupleTableSlot *slot,
					uint32 hashvalue)
{
	bool		shouldFree;
	MinimalTuple tuple = ExecFetchSlotMinimalTuple(slot, &shouldFree);
	int			bucketno;
	int			batchno;
	PlanState *ps = &hashState->ps;

	ExecHashGetBucketAndBatch(hashtable, hashvalue,
							  &bucketno, &batchno);

	/*
	 * decide whether to put the tuple in the hash table or a temp file
	 */
	if (batchno == hashtable->curbatch)
	{
		/*
		 * put the tuple in hash table
		 */
		HashJoinTuple hashTuple;
		int			hashTupleSize;
		double		ntuples = (hashtable->totalTuples - hashtable->skewTuples);

		/* Create the HashJoinTuple */
		hashTupleSize = HJTUPLE_OVERHEAD + tuple->t_len;
		hashTuple = (HashJoinTuple) dense_alloc(hashtable, hashTupleSize);

		hashTuple->hashvalue = hashvalue;
		memcpy(HJTUPLE_MINTUPLE(hashTuple), tuple, tuple->t_len);

		/*
		 * We always reset the tuple-matched flag on insertion.  This is okay
		 * even when reloading a tuple from a batch file, since the tuple
		 * could not possibly have been matched to an outer tuple before it
		 * went into the batch file.
		 */
		HeapTupleHeaderClearMatch(HJTUPLE_MINTUPLE(hashTuple));

		/* Push it onto the front of the bucket's list */
		hashTuple->next.unshared = hashtable->buckets.unshared[bucketno];
		hashtable->buckets.unshared[bucketno] = hashTuple;

		/*
		 * Increase the (optimal) number of buckets if we just exceeded the
		 * NTUP_PER_BUCKET threshold, but only when there's still a single
		 * batch.
		 */
		if (hashtable->nbatch == 1 &&
			ntuples > (hashtable->nbuckets_optimal * gp_hashjoin_tuples_per_bucket))
		{
			/* Guard against integer overflow and alloc size overflow */
			if (hashtable->nbuckets_optimal <= INT_MAX / 2 &&
				hashtable->nbuckets_optimal * 2 <= MaxAllocSize / sizeof(HashJoinTuple))
			{
				hashtable->nbuckets_optimal *= 2;
				hashtable->log2_nbuckets_optimal += 1;
			}
		}

		/* Account for space used, and back off if we've used too much */
		hashtable->spaceUsed += hashTupleSize;
		if (hashtable->spaceUsed > hashtable->spacePeak)
			hashtable->spacePeak = hashtable->spaceUsed;
		if (hashtable->spaceUsed +
			hashtable->nbuckets_optimal * sizeof(HashJoinTuple)
			> hashtable->spaceAllowed)
		{
			ExecHashIncreaseNumBatches(hashtable);

			if (ps && ps->instrument)
			{
				ps->instrument->workfileCreated = true;
			}
		}
	}
	else
	{
		/*
		 * put the tuple into a temp file for later batches
		 */
		Assert(batchno > hashtable->curbatch);
		ExecHashJoinSaveTuple(ps, tuple,
							  hashvalue,
							  hashtable,
							  &hashtable->innerBatchFile[batchno],
							  hashtable->bfCxt);
	}

	if (shouldFree)
		heap_free_minimal_tuple(tuple);

	return (batchno == hashtable->curbatch);
}

/*
 * ExecParallelHashTableInsert
 *		insert a tuple into a shared hash table or shared batch tuplestore
 */
void
ExecParallelHashTableInsert(HashJoinTable hashtable,
							TupleTableSlot *slot,
							uint32 hashvalue)
{
	bool		shouldFree;
	MinimalTuple tuple = ExecFetchSlotMinimalTuple(slot, &shouldFree);
	dsa_pointer shared;
	int			bucketno;
	int			batchno;

retry:
	ExecHashGetBucketAndBatch(hashtable, hashvalue, &bucketno, &batchno);

	if (batchno == 0)
	{
		HashJoinTuple hashTuple;

		/* Try to load it into memory. */
		Assert(BarrierPhase(&hashtable->parallel_state->build_barrier) ==
			   PHJ_BUILD_HASH_INNER);
		hashTuple = ExecParallelHashTupleAlloc(hashtable,
											   HJTUPLE_OVERHEAD + tuple->t_len,
											   &shared);
		if (hashTuple == NULL)
			goto retry;

		/* Store the hash value in the HashJoinTuple header. */
		hashTuple->hashvalue = hashvalue;
		memcpy(HJTUPLE_MINTUPLE(hashTuple), tuple, tuple->t_len);
		HeapTupleHeaderClearMatch(HJTUPLE_MINTUPLE(hashTuple));

		/* Push it onto the front of the bucket's list */
		ExecParallelHashPushTuple(&hashtable->buckets.shared[bucketno],
								  hashTuple, shared);
	}
	else
	{
		size_t		tuple_size = MAXALIGN(HJTUPLE_OVERHEAD + tuple->t_len);

		Assert(batchno > 0);

		/* Try to preallocate space in the batch if necessary. */
		if (hashtable->batches[batchno].preallocated < tuple_size)
		{
			if (!ExecParallelHashTuplePrealloc(hashtable, batchno, tuple_size))
				goto retry;
		}

		Assert(hashtable->batches[batchno].preallocated >= tuple_size);
		hashtable->batches[batchno].preallocated -= tuple_size;
		sts_puttuple(hashtable->batches[batchno].inner_tuples, &hashvalue,
					 tuple);
	}
	++hashtable->batches[batchno].ntuples;

	if (shouldFree)
		heap_free_minimal_tuple(tuple);
}

/*
 * Insert a tuple into the current hash table.  Unlike
 * ExecParallelHashTableInsert, this version is not prepared to send the tuple
 * to other batches or to run out of memory, and should only be called with
 * tuples that belong in the current batch once growth has been disabled.
 */
void
ExecParallelHashTableInsertCurrentBatch(HashJoinTable hashtable,
										TupleTableSlot *slot,
										uint32 hashvalue)
{
	bool		shouldFree;
	MinimalTuple tuple = ExecFetchSlotMinimalTuple(slot, &shouldFree);
	HashJoinTuple hashTuple;
	dsa_pointer shared;
	int			batchno;
	int			bucketno;

	ExecHashGetBucketAndBatch(hashtable, hashvalue, &bucketno, &batchno);
	Assert(batchno == hashtable->curbatch);
	hashTuple = ExecParallelHashTupleAlloc(hashtable,
										   HJTUPLE_OVERHEAD + tuple->t_len,
										   &shared);
	hashTuple->hashvalue = hashvalue;
	memcpy(HJTUPLE_MINTUPLE(hashTuple), tuple, tuple->t_len);
	HeapTupleHeaderClearMatch(HJTUPLE_MINTUPLE(hashTuple));
	ExecParallelHashPushTuple(&hashtable->buckets.shared[bucketno],
							  hashTuple, shared);

	if (shouldFree)
		heap_free_minimal_tuple(tuple);
}

/*
 * ExecHashGetHashValue
 *		Compute the hash value for a tuple
 *
 * The tuple to be tested must be in econtext->ecxt_outertuple (thus Vars in
 * the hashkeys expressions need to have OUTER_VAR as varno). If outer_tuple
 * is false (meaning it's the HashJoin's inner node, Hash), econtext,
 * hashkeys, and slot need to be from Hash, with hashkeys/slot referencing and
 * being suitable for tuples from the node below the Hash. Conversely, if
 * outer_tuple is true, econtext is from HashJoin, and hashkeys/slot need to
 * be appropriate for tuples from HashJoin's outer node.
 *
 * A true result means the tuple's hash value has been successfully computed
 * and stored at *hashvalue.  A false result means the tuple cannot match
 * because it contains a null attribute, and hence it should be discarded
 * immediately.  (If keep_nulls is true then false is never returned.)
 * hashkeys_null indicates all the hashkeys are null.
 */
bool
ExecHashGetHashValue(HashState *hashState, HashJoinTable hashtable,
					 ExprContext *econtext,
					 List *hashkeys,
					 bool outer_tuple,
					 bool keep_nulls,
					 uint32 *hashvalue,
					 bool *hashkeys_null)
{
	uint32		hashkey = 0;
	FmgrInfo   *hashfunctions;
	List	   *keyvalues = NIL;
	ListCell   *hk;
	int			i = 0;
	MemoryContext oldContext;
	bool		result = true;
	bool		build_runtime_filter;

	Assert(hashkeys_null);

	(*hashkeys_null) = true;

	/*
	 * We reset the eval context each time to reclaim any memory leaked in the
	 * hashkey expressions.
	 */
	ResetExprContext(econtext);

	oldContext = MemoryContextSwitchTo(econtext->ecxt_per_tuple_memory);

	if (outer_tuple)
		hashfunctions = hashtable->outer_hashfunctions;
	else
		hashfunctions = hashtable->inner_hashfunctions;
	
	build_runtime_filter = !outer_tuple && hashState->rfstate != NULL &&
						   !hashState->rfstate->build_suspend;

	foreach(hk, hashkeys)
	{
		ExprState  *keyexpr = (ExprState *) lfirst(hk);
		Datum		keyval;
		uint32		hkey = 0;
		bool		isNull = false;

		/* combine successive hashkeys by rotating */
		hashkey = pg_rotate_left32(hashkey, 1);

		/*
		 * Get the join attribute value of the tuple
		 */
		keyval = ExecEvalExpr(keyexpr, econtext, &isNull);

		if (!isNull)
		{
			*hashkeys_null = false;
		}

		/*
		 * If the attribute is NULL, and the join operator is strict, then
		 * this tuple cannot pass the join qual so we can reject it
		 * immediately (unless we're scanning the outside of an outer join, in
		 * which case we must not reject it).  Otherwise we act like the
		 * hashcode of NULL is zero (this will support operators that act like
		 * IS NOT DISTINCT, though not any more-random behavior).  We treat
		 * the hash support function as strict even if the operator is not.
		 *
		 * Note: currently, all hashjoinable operators must be strict since
		 * the hash index AM assumes that.  However, it takes so little extra
		 * code here to allow non-strict that we may as well do it.
		 */
		if (isNull)
		{
			if (hashtable->hashStrict[i] && !keep_nulls)
			{
				result = false;
			}
			/* else, leave hashkey unmodified, equivalent to hashcode 0 */
		}
		else if (result)
		{
			/* Compute the hash function */
			hkey = DatumGetUInt32(FunctionCall1Coll(&hashfunctions[i], hashtable->collations[i], keyval));
			hashkey ^= hkey;
		}

		if (build_runtime_filter)
		{
			Datum *dp = palloc(sizeof(Datum));

			/* consider use raw value or hash value */
			*dp = hashState->rfstate->raw_value[i] ? keyval : hkey;
			keyvalues = lappend(keyvalues, dp);
		}

		i++;
	}

	if (build_runtime_filter && result)
		RFAddTupleValues(hashState->rfstate, keyvalues);

	MemoryContextSwitchTo(oldContext);

	*hashvalue = hashkey;
	return result;
}

/*
 * ExecHashGetBucketAndBatch
 *		Determine the bucket number and batch number for a hash value
 *
 * Note: on-the-fly increases of nbatch must not change the bucket number
 * for a given hash code (since we don't move tuples to different hash
 * chains), and must only cause the batch number to remain the same or
 * increase.  Our algorithm is
 *		bucketno = hashvalue MOD nbuckets
 *		batchno = ROR(hashvalue, log2_nbuckets) MOD nbatch
 * where nbuckets and nbatch are both expected to be powers of 2, so we can
 * do the computations by shifting and masking.  (This assumes that all hash
 * functions are good about randomizing all their output bits, else we are
 * likely to have very skewed bucket or batch occupancy.)
 *
 * nbuckets and log2_nbuckets may change while nbatch == 1 because of dynamic
 * bucket count growth.  Once we start batching, the value is fixed and does
 * not change over the course of the join (making it possible to compute batch
 * number the way we do here).
 *
 * nbatch is always a power of 2; we increase it only by doubling it.  This
 * effectively adds one more bit to the top of the batchno.  In very large
 * joins, we might run out of bits to add, so we do this by rotating the hash
 * value.  This causes batchno to steal bits from bucketno when the number of
 * virtual buckets exceeds 2^32.  It's better to have longer bucket chains
 * than to lose the ability to divide batches.
 */
void
ExecHashGetBucketAndBatch(HashJoinTable hashtable,
						  uint32 hashvalue,
						  int *bucketno,
						  int *batchno)
{
	uint32		nbuckets = (uint32) hashtable->nbuckets;
	uint32		nbatch = (uint32) hashtable->nbatch;

	if (nbatch > 1)
	{
		*bucketno = hashvalue & (nbuckets - 1);
		*batchno = pg_rotate_right32(hashvalue,
									 hashtable->log2_nbuckets) & (nbatch - 1);
	}
	else
	{
		*bucketno = hashvalue & (nbuckets - 1);
		*batchno = 0;
	}
}

/*
 * ExecScanHashBucket
 *		scan a hash bucket for matches to the current outer tuple
 *
 * The current outer tuple must be stored in econtext->ecxt_outertuple.
 *
 * On success, the inner tuple is stored into hjstate->hj_CurTuple and
 * econtext->ecxt_innertuple, using hjstate->hj_HashTupleSlot as the slot
 * for the latter.
 */
bool
ExecScanHashBucket(HashState *hashState, HashJoinState *hjstate,
				   ExprContext *econtext)
{
	/*
	 * Greenplum specific behavior.
	 * Using hashqualclauses to support hash join on 'IS NOT DISTINCT FROM'
	 * as well as '='.
	 */
	ExprState  *hjclauses = hjstate->hashqualclauses;
	HashJoinTable hashtable = hjstate->hj_HashTable;
	HashJoinTuple hashTuple = hjstate->hj_CurTuple;
	uint32		hashvalue = hjstate->hj_CurHashValue;

	/*
	 * hj_CurTuple is the address of the tuple last returned from the current
	 * bucket, or NULL if it's time to start scanning a new bucket.
	 *
	 * If the tuple hashed to a skew bucket then scan the skew bucket
	 * otherwise scan the standard hashtable bucket.
	 */
	if (hashTuple != NULL)
		hashTuple = hashTuple->next.unshared;
	else if (hjstate->hj_CurSkewBucketNo != INVALID_SKEW_BUCKET_NO)
		hashTuple = hashtable->skewBucket[hjstate->hj_CurSkewBucketNo]->tuples;
	else
		hashTuple = hashtable->buckets.unshared[hjstate->hj_CurBucketNo];

	while (hashTuple != NULL)
	{
		if (hashTuple->hashvalue == hashvalue)
		{
			TupleTableSlot *inntuple;

			/* insert hashtable's tuple into exec slot so ExecQual sees it */
			inntuple = ExecStoreMinimalTuple(HJTUPLE_MINTUPLE(hashTuple),
											 hjstate->hj_HashTupleSlot,
											 false);	/* do not pfree */
			econtext->ecxt_innertuple = inntuple;

			if (ExecQualAndReset(hjclauses, econtext))
			{
				hjstate->hj_CurTuple = hashTuple;
				return true;
			}
		}

		hashTuple = hashTuple->next.unshared;
	}

	/*
	 * no match
	 */
	return false;
}

/*
 * ExecParallelScanHashBucket
 *		scan a hash bucket for matches to the current outer tuple
 *
 * The current outer tuple must be stored in econtext->ecxt_outertuple.
 *
 * On success, the inner tuple is stored into hjstate->hj_CurTuple and
 * econtext->ecxt_innertuple, using hjstate->hj_HashTupleSlot as the slot
 * for the latter.
 */
bool
ExecParallelScanHashBucket(HashState *hashState, HashJoinState *hjstate,
						   ExprContext *econtext)
{
	/*
	 * Greenplum specific behavior.
	 * Using hashqualclauses to support hash join on 'IS NOT DISTINCT FROM'
	 * as well as '='.
	 */
	ExprState  *hjclauses = hjstate->hashqualclauses;
	HashJoinTable hashtable = hjstate->hj_HashTable;
	HashJoinTuple hashTuple = hjstate->hj_CurTuple;
	uint32		hashvalue = hjstate->hj_CurHashValue;

	/*
	 * hj_CurTuple is the address of the tuple last returned from the current
	 * bucket, or NULL if it's time to start scanning a new bucket.
	 */
	if (hashTuple != NULL)
		hashTuple = ExecParallelHashNextTuple(hashtable, hashTuple);
	else
		hashTuple = ExecParallelHashFirstTuple(hashtable,
											   hjstate->hj_CurBucketNo);

	while (hashTuple != NULL)
	{
		if (hashTuple->hashvalue == hashvalue)
		{
			TupleTableSlot *inntuple;

			/* insert hashtable's tuple into exec slot so ExecQual sees it */
			inntuple = ExecStoreMinimalTuple(HJTUPLE_MINTUPLE(hashTuple),
											 hjstate->hj_HashTupleSlot,
											 false);	/* do not pfree */
			econtext->ecxt_innertuple = inntuple;

			if (ExecQualAndReset(hjclauses, econtext))
			{
				hjstate->hj_CurTuple = hashTuple;
				return true;
			}
		}

		hashTuple = ExecParallelHashNextTuple(hashtable, hashTuple);
	}

	/*
	 * no match
	 */
	return false;
}

/*
 * ExecPrepHashTableForUnmatched
 *		set up for a series of ExecScanHashTableForUnmatched calls
 */
void
ExecPrepHashTableForUnmatched(HashJoinState *hjstate)
{
	/*----------
	 * During this scan we use the HashJoinState fields as follows:
	 *
	 * hj_CurBucketNo: next regular bucket to scan
	 * hj_CurSkewBucketNo: next skew bucket (an index into skewBucketNums)
	 * hj_CurTuple: last tuple returned, or NULL to start next bucket
	 *----------
	 */
	hjstate->hj_CurBucketNo = 0;
	hjstate->hj_CurSkewBucketNo = 0;
	hjstate->hj_CurTuple = NULL;
}

/*
 * Decide if this process is allowed to run the unmatched scan.  If so, the
 * batch barrier is advanced to PHJ_BATCH_SCAN and true is returned.
 * Otherwise the batch is detached and false is returned.
 */
bool
ExecParallelPrepHashTableForUnmatched(HashJoinState *hjstate)
{
	HashJoinTable hashtable = hjstate->hj_HashTable;
	int			curbatch = hashtable->curbatch;
	ParallelHashJoinBatch *batch = hashtable->batches[curbatch].shared;

	Assert(BarrierPhase(&batch->batch_barrier) == PHJ_BATCH_PROBE);

	/*
	 * It would not be deadlock-free to wait on the batch barrier, because it
	 * is in PHJ_BATCH_PROBING phase, and thus processes attached to it have
	 * already emitted tuples.  Therefore, we'll hold a wait-free election:
	 * only one process can continue to the next phase, and all others detach
	 * from this batch.  They can still go any work on other batches, if there
	 * are any.
	 */
	if (!BarrierArriveAndDetachExceptLast(&batch->batch_barrier))
	{
		/* This process considers the batch to be done. */
		hashtable->batches[hashtable->curbatch].done = true;

		/* Make sure any temporary files are closed. */
		sts_end_parallel_scan(hashtable->batches[curbatch].inner_tuples);
		sts_end_parallel_scan(hashtable->batches[curbatch].outer_tuples);

		/*
		 * Track largest batch we've seen, which would normally happen in
		 * ExecHashTableDetachBatch().
		 */
		hashtable->spacePeak =
			Max(hashtable->spacePeak,
				batch->size + sizeof(dsa_pointer_atomic) * hashtable->nbuckets);
		hashtable->curbatch = -1;
		return false;
	}

	/* Now we are alone with this batch. */
	Assert(BarrierPhase(&batch->batch_barrier) == PHJ_BATCH_SCAN);

	/*
	 * Has another process decided to give up early and command all processes
	 * to skip the unmatched scan?
	 */
	if (batch->skip_unmatched)
	{
		hashtable->batches[hashtable->curbatch].done = true;
		ExecHashTableDetachBatch(hashtable);
		return false;
	}

	/* Now prepare the process local state, just as for non-parallel join. */
	ExecPrepHashTableForUnmatched(hjstate);

	return true;
}

/*
 * ExecScanHashTableForUnmatched
 *		scan the hash table for unmatched inner tuples
 *
 * On success, the inner tuple is stored into hjstate->hj_CurTuple and
 * econtext->ecxt_innertuple, using hjstate->hj_HashTupleSlot as the slot
 * for the latter.
 */
bool
ExecScanHashTableForUnmatched(HashJoinState *hjstate, ExprContext *econtext)
{
	HashJoinTable hashtable = hjstate->hj_HashTable;
	HashJoinTuple hashTuple = hjstate->hj_CurTuple;

	for (;;)
	{
		/*
		 * hj_CurTuple is the address of the tuple last returned from the
		 * current bucket, or NULL if it's time to start scanning a new
		 * bucket.
		 */
		if (hashTuple != NULL)
			hashTuple = hashTuple->next.unshared;
		else if (hjstate->hj_CurBucketNo < hashtable->nbuckets)
		{
			hashTuple = hashtable->buckets.unshared[hjstate->hj_CurBucketNo];
			hjstate->hj_CurBucketNo++;
		}
		else if (hjstate->hj_CurSkewBucketNo < hashtable->nSkewBuckets)
		{
			int			j = hashtable->skewBucketNums[hjstate->hj_CurSkewBucketNo];

			hashTuple = hashtable->skewBucket[j]->tuples;
			hjstate->hj_CurSkewBucketNo++;
		}
		else
			break;				/* finished all buckets */

		while (hashTuple != NULL)
		{
			if (!HeapTupleHeaderHasMatch(HJTUPLE_MINTUPLE(hashTuple)))
			{
				TupleTableSlot *inntuple;

				/* insert hashtable's tuple into exec slot */
				inntuple = ExecStoreMinimalTuple(HJTUPLE_MINTUPLE(hashTuple),
												 hjstate->hj_HashTupleSlot,
												 false);	/* do not pfree */
				econtext->ecxt_innertuple = inntuple;

				/*
				 * Reset temp memory each time; although this function doesn't
				 * do any qual eval, the caller will, so let's keep it
				 * parallel to ExecScanHashBucket.
				 */
				ResetExprContext(econtext);

				hjstate->hj_CurTuple = hashTuple;
				return true;
			}

			hashTuple = hashTuple->next.unshared;
		}

		/* allow this loop to be cancellable */
		CHECK_FOR_INTERRUPTS();
	}

	/*
	 * no more unmatched tuples
	 */
	return false;
}

/*
 * ExecParallelScanHashTableForUnmatched
 *		scan the hash table for unmatched inner tuples, in parallel join
 *
 * On success, the inner tuple is stored into hjstate->hj_CurTuple and
 * econtext->ecxt_innertuple, using hjstate->hj_HashTupleSlot as the slot
 * for the latter.
 */
bool
ExecParallelScanHashTableForUnmatched(HashJoinState *hjstate,
									  ExprContext *econtext)
{
	HashJoinTable hashtable = hjstate->hj_HashTable;
	HashJoinTuple hashTuple = hjstate->hj_CurTuple;

	for (;;)
	{
		/*
		 * hj_CurTuple is the address of the tuple last returned from the
		 * current bucket, or NULL if it's time to start scanning a new
		 * bucket.
		 */
		if (hashTuple != NULL)
			hashTuple = ExecParallelHashNextTuple(hashtable, hashTuple);
		else if (hjstate->hj_CurBucketNo < hashtable->nbuckets)
			hashTuple = ExecParallelHashFirstTuple(hashtable,
												   hjstate->hj_CurBucketNo++);
		else
			break;				/* finished all buckets */

		while (hashTuple != NULL)
		{
			if (!HeapTupleHeaderHasMatch(HJTUPLE_MINTUPLE(hashTuple)))
			{
				TupleTableSlot *inntuple;

				/* insert hashtable's tuple into exec slot */
				inntuple = ExecStoreMinimalTuple(HJTUPLE_MINTUPLE(hashTuple),
												 hjstate->hj_HashTupleSlot,
												 false);	/* do not pfree */
				econtext->ecxt_innertuple = inntuple;

				/*
				 * Reset temp memory each time; although this function doesn't
				 * do any qual eval, the caller will, so let's keep it
				 * parallel to ExecScanHashBucket.
				 */
				ResetExprContext(econtext);

				hjstate->hj_CurTuple = hashTuple;
				return true;
			}

			hashTuple = ExecParallelHashNextTuple(hashtable, hashTuple);
		}

		/* allow this loop to be cancellable */
		CHECK_FOR_INTERRUPTS();
	}

	/*
	 * no more unmatched tuples
	 */
	return false;
}

/*
 * ExecHashTableReset
 *
 *		reset hash table header for new batch
 */
void
ExecHashTableReset(HashState *hashState, HashJoinTable hashtable)
{
	MemoryContext oldcxt;
	int			nbuckets = hashtable->nbuckets;

	Assert(!hashtable->eagerlyReleased);

	/*
	 * Release all the hash buckets and tuples acquired in the prior pass, and
	 * reinitialize the context for a new pass.
	 */
	MemoryContextReset(hashtable->batchCxt);
	oldcxt = MemoryContextSwitchTo(hashtable->batchCxt);

	/* Reallocate and reinitialize the hash bucket headers. */
	hashtable->buckets.unshared = palloc0_array(HashJoinTuple, nbuckets);

	hashtable->spaceUsed = 0;
	hashtable->totalTuples = 0;

	MemoryContextSwitchTo(oldcxt);

	/* Forget the chunks (the memory was freed by the context reset above). */
	hashtable->chunks = NULL;
}

/*
 * ExecHashTableResetMatchFlags
 *		Clear all the HeapTupleHeaderHasMatch flags in the table
 */
void
ExecHashTableResetMatchFlags(HashJoinTable hashtable)
{
	HashJoinTuple tuple;
	int			i;

	/* Reset all flags in the main table ... */
	for (i = 0; i < hashtable->nbuckets; i++)
	{
		for (tuple = hashtable->buckets.unshared[i]; tuple != NULL;
			 tuple = tuple->next.unshared)
			HeapTupleHeaderClearMatch(HJTUPLE_MINTUPLE(tuple));
	}

	/* ... and the same for the skew buckets, if any */
	for (i = 0; i < hashtable->nSkewBuckets; i++)
	{
		int			j = hashtable->skewBucketNums[i];
		HashSkewBucket *skewBucket = hashtable->skewBucket[j];

		for (tuple = skewBucket->tuples; tuple != NULL; tuple = tuple->next.unshared)
			HeapTupleHeaderClearMatch(HJTUPLE_MINTUPLE(tuple));
	}
}


void
ExecReScanHash(HashState *node)
{
	PlanState  *outerPlan = outerPlanState(node);

	/*
	 * if chgParam of subnode is not null then plan will be re-scanned by
	 * first ExecProcNode.
	 */
	if (outerPlan->chgParam == NULL)
		ExecReScan(outerPlan);

	if (gp_enable_runtime_filter_pushdown && node->filters)
		ResetRuntimeFilter(node);
}


/*
 * ExecHashTableExplainInit
 *      Called after ExecHashTableCreate to set up EXPLAIN ANALYZE reporting.
 */
void
ExecHashTableExplainInit(HashState *hashState, HashJoinState *hjstate,
						 HashJoinTable hashtable)
{
	MemoryContext oldcxt;
	int			nbatch = Max(hashtable->nbatch, 1);

    /* Switch to a memory context that survives until ExecutorEnd. */
    oldcxt = MemoryContextSwitchTo(hjstate->js.ps.state->es_query_cxt);

    /* Request a callback at end of query. */
    hjstate->js.ps.cdbexplainfun = ExecHashTableExplainEnd;

    /* Create workarea and attach it to the HashJoinTable. */
    hashtable->stats = (HashJoinTableStats *)palloc0(sizeof(*hashtable->stats));
    hashtable->stats->endedbatch = -1;

    /* Create per-batch statistics array. */
    hashtable->stats->batchstats =
        (HashJoinBatchStats *)palloc0(nbatch * sizeof(hashtable->stats->batchstats[0]));
    hashtable->stats->nbatchstats = nbatch;

    /* Restore caller's memory context. */
    MemoryContextSwitchTo(oldcxt);
}                               /* ExecHashTableExplainInit */


/*
 * ExecHashTableExplainEnd
 *      Called before ExecutorEnd to finish EXPLAIN ANALYZE reporting.
 */
static void
ExecHashTableExplainEnd(PlanState *planstate, struct StringInfoData *buf)
{
    HashJoinState      *hjstate = (HashJoinState *)planstate;
    HashJoinTable       hashtable = hjstate->hj_HashTable;
    HashJoinTableStats *stats;
    Instrumentation    *jinstrument = hjstate->js.ps.instrument;
    int                 total_buckets;
    int                 i;

    if (!hashtable ||
        !hashtable->stats ||
        hashtable->nbatch < 1 ||
        !jinstrument ||
        !jinstrument->need_cdb)
        return;

    stats = hashtable->stats;

	Assert(stats->batchstats);

	if (!hashtable->eagerlyReleased)
	{		
		HashState *hashState = (HashState *) innerPlanState(hjstate);

		/* Report on batch in progress, in case the join is being ended early. */
		ExecHashTableExplainBatchEnd(hashState, hashtable);
	}
	
    /* Report actual work_mem high water mark. */
    jinstrument->workmemused = Max(jinstrument->workmemused, stats->workmem_max);

    /* How much work_mem would suffice to hold all inner tuples in memory? */
    if (hashtable->nbatch > 1)
    {
        uint64  workmemwanted = 0;

        /* Space actually taken by hash rows in completed batches... */
        for (i = 0; i <= stats->endedbatch; i++)
            workmemwanted += stats->batchstats[i].hashspace_final;

        /* ... plus workfile size for original batches not reached, plus... */
        for (; i < hashtable->nbatch_original; i++)
            workmemwanted += stats->batchstats[i].innerfilesize;

        /* ... rows spilled to unreached oflo batches, in case quitting early */
        for (; i < stats->nbatchstats; i++)
            workmemwanted += stats->batchstats[i].spillspace_in;

        /*
         * Sometimes workfiles are used even though all the data would fit
         * in work_mem.  For example, if the planner overestimated the inner
         * rel size, it might have instructed us to use more initial batches
         * than were actually needed, causing unnecessary workfile I/O.  To
         * avoid this I/O, the user would have to increase work_mem based on
         * the planner's estimate rather than our runtime observations.  For
         * now, we don't try to second-guess the planner; just keep quiet.
         */
        if (workmemwanted > PlanStateOperatorMemKB(planstate) * 1024L)
            jinstrument->workmemwanted =
                Max(jinstrument->workmemwanted, workmemwanted);
    }

    /* Report workfile I/O statistics. */
    /* CBDB_PARALLEL_FIXME: ExecHashTableExplainBatches if parallel_aware? */
    if (hashtable->nbatch > 1 && !planstate->plan->parallel_aware)
    {
    	ExecHashTableExplainBatches(hashtable, buf, 0, 1, "Initial");
    	ExecHashTableExplainBatches(hashtable,
    			buf,
				1,
				hashtable->nbatch_original,
				"Initial");
    	ExecHashTableExplainBatches(hashtable,
    			buf,
				hashtable->nbatch_original,
				hashtable->nbatch_outstart,
				"Overflow");
    	ExecHashTableExplainBatches(hashtable,
    			buf,
				hashtable->nbatch_outstart,
				hashtable->nbatch,
				"Secondary Overflow");
    }

    /* Report hash chain statistics. */
    total_buckets = stats->nonemptybatches * hashtable->nbuckets;
    if (total_buckets > 0)
    {
        appendStringInfo(buf,
                         "Hash chain length"
                         " %.1f avg, %.0f max, using %d of %d buckets.",
                         cdbexplain_agg_avg(&stats->chainlength),
                         stats->chainlength.vmax,
                         stats->chainlength.vcnt,
                         total_buckets);
        if (hashtable->nbatch > stats->nonemptybatches)
            appendStringInfo(buf,
                             "  Skipped %d empty batches.",
                             hashtable->nbatch - stats->nonemptybatches);
    }
}                               /* ExecHashTableExplainEnd */


/*
 * ExecHashTableExplainBatches
 *      Report summary of EXPLAIN ANALYZE stats for a set of batches.
 */
static void
ExecHashTableExplainBatches(HashJoinTable   hashtable,
                            StringInfo      buf,
                            int             ibatch_begin,
                            int             ibatch_end,
                            const char     *title)
{
    HashJoinTableStats *stats = hashtable->stats;
    CdbExplain_Agg      irdbytes;
    CdbExplain_Agg      iwrbytes;
    CdbExplain_Agg      ordbytes;
    CdbExplain_Agg      owrbytes;
    int                 i;

    if (ibatch_begin >= ibatch_end)
        return;

    Assert(ibatch_begin >= 0 &&
           ibatch_end <= hashtable->nbatch &&
           hashtable->nbatch <= stats->nbatchstats &&
           stats->batchstats != NULL);

    cdbexplain_agg_init0(&irdbytes);
    cdbexplain_agg_init0(&iwrbytes);
    cdbexplain_agg_init0(&ordbytes);
    cdbexplain_agg_init0(&owrbytes);

    /* Add up the batch stats. */
    for (i = ibatch_begin; i < ibatch_end; i++)
    {
        HashJoinBatchStats *bs = &stats->batchstats[i];

        cdbexplain_agg_upd(&irdbytes, (double)bs->irdbytes, i);
        cdbexplain_agg_upd(&iwrbytes, (double)bs->iwrbytes, i);
        cdbexplain_agg_upd(&ordbytes, (double)bs->ordbytes, i);
        cdbexplain_agg_upd(&owrbytes, (double)bs->owrbytes, i);
    }

    if (iwrbytes.vcnt + irdbytes.vcnt + owrbytes.vcnt + ordbytes.vcnt > 0)
    {
        if (ibatch_begin == ibatch_end - 1)
            appendStringInfo(buf,
                             "%s batch %d:\n",
                             title,
                             ibatch_begin);
        else
            appendStringInfo(buf,
                             "%s batches %d..%d:\n",
                             title,
                             ibatch_begin,
                             ibatch_end - 1);
    }

    /* Inner bytes read from workfile */
    if (irdbytes.vcnt > 0)
    {
        appendStringInfo(buf,
                         "  Read %.0fK bytes from inner workfile",
                         ceil(irdbytes.vsum / 1024));
        if (irdbytes.vcnt > 1)
            appendStringInfo(buf,
                             ": %.0fK avg x %d nonempty batches"
                             ", %.0fK max",
                             ceil(cdbexplain_agg_avg(&irdbytes)/1024),
                             irdbytes.vcnt,
                             ceil(irdbytes.vmax / 1024));
        appendStringInfoString(buf, ".\n");
    }

    /* Inner rel bytes spilled to workfile */
    if (iwrbytes.vcnt > 0)
    {
        appendStringInfo(buf,
                         "  Wrote %.0fK bytes to inner workfile",
                         ceil(iwrbytes.vsum / 1024));
        if (iwrbytes.vcnt > 1)
            appendStringInfo(buf,
                             ": %.0fK avg x %d overflowing batches"
                             ", %.0fK max",
                             ceil(cdbexplain_agg_avg(&iwrbytes)/1024),
                             iwrbytes.vcnt,
                             ceil(iwrbytes.vmax / 1024));
        appendStringInfoString(buf, ".\n");
    }

    /* Outer bytes read from workfile */
    if (ordbytes.vcnt > 0)
    {
        appendStringInfo(buf,
                         "  Read %.0fK bytes from outer workfile",
                         ceil(ordbytes.vsum / 1024));
        if (ordbytes.vcnt > 1)
            appendStringInfo(buf,
                             ": %.0fK avg x %d nonempty batches"
                             ", %.0fK max",
                             ceil(cdbexplain_agg_avg(&ordbytes)/1024),
                             ordbytes.vcnt,
                             ceil(ordbytes.vmax / 1024));
        appendStringInfoString(buf, ".\n");
    }

    /* Outer rel bytes spilled to workfile */
    if (owrbytes.vcnt > 0)
    {
        appendStringInfo(buf,
                         "  Wrote %.0fK bytes to outer workfile",
                         ceil(owrbytes.vsum / 1024));
        if (owrbytes.vcnt > 1)
            appendStringInfo(buf,
                             ": %.0fK avg x %d overflowing batches"
                             ", %.0fK max",
                             ceil(cdbexplain_agg_avg(&owrbytes)/1024),
                             owrbytes.vcnt,
                             ceil(owrbytes.vmax / 1024));
        appendStringInfoString(buf, ".\n");
    }
}                               /* ExecHashTableExplainBatches */


/*
 * ExecHashTableExplainBatchEnd
 *      Called at end of each batch to collect statistics for EXPLAIN ANALYZE.
 */
void
ExecHashTableExplainBatchEnd(HashState *hashState, HashJoinTable hashtable)
{
    int                 curbatch = hashtable->curbatch;
    HashJoinTableStats *stats = hashtable->stats;
    HashJoinBatchStats *batchstats = &stats->batchstats[curbatch];
    
    Assert(!hashtable->eagerlyReleased);

    /* Already reported on this batch? */
    if ( stats->endedbatch == curbatch 
			|| curbatch >= hashtable->nbatch || !hashtable->first_pass)
        return;
    stats->endedbatch = curbatch;

    /* Update high-water mark for work_mem actually used at one time. */
    if (stats->workmem_max < hashtable->spaceUsed)
        stats->workmem_max = hashtable->spaceUsed;

    /* Final size of hash table for this batch */
    batchstats->hashspace_final = hashtable->spaceUsed;

    /* Collect buffile I/O statistics. */
    /* Parallel hash join uses shared tuplestores, don't consider it now. */
    if (hashtable->parallel_state == NULL)
    {
		if (hashtable->nbatch > 1)
		{
			uint64      owrbytes = 0;
			uint64      iwrbytes = 0;

			Assert(stats->batchstats &&
					hashtable->nbatch <= stats->nbatchstats);

			/* for curbatch=0, the inner tuple is in the in-memory hash table, the outer tuple is
			 * read from outer relation, nothing need to read from batch file, but the innerfilesize
			 * is initialized to 0 and the outerBatchFile[0] is initialized to NULL.
			 * for curbatch>0, the inner tuple and outer tuple are read from batch file.
			 */

			/* How much was read from inner buffile for current batch? */
			batchstats->irdbytes = batchstats->innerfilesize;

			/* How much was read from outer buffiles for current batch? */
			if (hashtable->outerBatchFile &&
					hashtable->outerBatchFile[curbatch] != NULL)
			{
				batchstats->ordbytes = BufFileSize(hashtable->outerBatchFile[curbatch]);
			}

			/* for curbatch=0, the tuple which is not belong to the batch 0 is put into the temp
			 * file for later batches.
			 * for curbatch>0, It's possible that we increase the number, so that by the time we
			 * reload curbatch file, some of the tuples we wrote here will logically belong to a later
			 * file, they may be sent to future batches, so we count the increasing size here.
			 */

			/* How much was written to buffiles for the remaining batches? */
			for (int i = curbatch + 1; i < hashtable->nbatch; i++)
			{
				HashJoinBatchStats *bs = &stats->batchstats[i];
				uint64              filebytes = 0;

				if (hashtable->outerBatchFile &&
						hashtable->outerBatchFile[i] != NULL)
				{
					filebytes = BufFileSize(hashtable->outerBatchFile[i]);
				}

				Assert(filebytes >= bs->outerfilesize);
				owrbytes += filebytes - bs->outerfilesize;
				bs->outerfilesize = filebytes;

				filebytes = 0;

				if (hashtable->innerBatchFile &&
						hashtable->innerBatchFile[i])
				{
					filebytes = BufFileSize(hashtable->innerBatchFile[i]);
				}

				Assert(filebytes >= bs->innerfilesize);
				iwrbytes += filebytes - bs->innerfilesize;
				bs->innerfilesize = filebytes;
			}
			batchstats->owrbytes = owrbytes;
			batchstats->iwrbytes = iwrbytes;
		}                           /* give buffile I/O statistics */

		/* Collect hash chain statistics. */
		stats->nonemptybatches++;
		for (int i = 0; i < hashtable->nbuckets; i++)
		{
			HashJoinTuple   hashtuple = hashtable->buckets.unshared[i];
			int             chainlength;

			if (hashtuple)
			{
				for (chainlength = 0; hashtuple; hashtuple = hashtuple->next.unshared)
					chainlength++;
				cdbexplain_agg_upd(&stats->chainlength, chainlength, i);
			}
		}
    }
}                               /* ExecHashTableExplainBatchEnd */


/*
 * ExecHashBuildSkewHash
 *
 *		Set up for skew optimization if we can identify the most common values
 *		(MCVs) of the outer relation's join key.  We make a skew hash bucket
 *		for the hash value of each MCV, up to the number of slots allowed
 *		based on available memory.
 */
static void
ExecHashBuildSkewHash(HashJoinTable hashtable, Hash *node, int mcvsToUse)
{
	HeapTupleData *statsTuple;
	AttStatsSlot sslot;

	/* Do nothing if planner didn't identify the outer relation's join key */
	if (!OidIsValid(node->skewTable))
		return;
	/* Also, do nothing if we don't have room for at least one skew bucket */
	if (mcvsToUse <= 0)
		return;

	/*
	 * Try to find the MCV statistics for the outer relation's join key.
	 */
	statsTuple = SearchSysCache3(STATRELATTINH,
								 ObjectIdGetDatum(node->skewTable),
								 Int16GetDatum(node->skewColumn),
								 BoolGetDatum(node->skewInherit));
	if (!HeapTupleIsValid(statsTuple))
		return;

	if (get_attstatsslot(&sslot, statsTuple,
						 STATISTIC_KIND_MCV, InvalidOid,
						 ATTSTATSSLOT_VALUES | ATTSTATSSLOT_NUMBERS))
	{
		double		frac;
		int			nbuckets;
		FmgrInfo   *hashfunctions;
		int			i;

		if (mcvsToUse > sslot.nvalues)
			mcvsToUse = sslot.nvalues;

		/*
		 * Calculate the expected fraction of outer relation that will
		 * participate in the skew optimization.  If this isn't at least
		 * SKEW_MIN_OUTER_FRACTION, don't use skew optimization.
		 */
		frac = 0;
		for (i = 0; i < mcvsToUse; i++)
			frac += sslot.numbers[i];
		if (frac < SKEW_MIN_OUTER_FRACTION)
		{
			free_attstatsslot(&sslot);
			ReleaseSysCache(statsTuple);
			return;
		}

		/*
		 * Okay, set up the skew hashtable.
		 *
		 * skewBucket[] is an open addressing hashtable with a power of 2 size
		 * that is greater than the number of MCV values.  (This ensures there
		 * will be at least one null entry, so searches will always
		 * terminate.)
		 *
		 * Note: this code could fail if mcvsToUse exceeds INT_MAX/8 or
		 * MaxAllocSize/sizeof(void *)/8, but that is not currently possible
		 * since we limit pg_statistic entries to much less than that.
		 */
		nbuckets = pg_nextpower2_32(mcvsToUse + 1);
		/* use two more bits just to help avoid collisions */
		nbuckets <<= 2;

		hashtable->skewEnabled = true;
		hashtable->skewBucketLen = nbuckets;

		/*
		 * We allocate the bucket memory in the hashtable's batch context. It
		 * is only needed during the first batch, and this ensures it will be
		 * automatically removed once the first batch is done.
		 */
		hashtable->skewBucket = (HashSkewBucket **)
			MemoryContextAllocZero(hashtable->batchCxt,
								   nbuckets * sizeof(HashSkewBucket *));
		hashtable->skewBucketNums = (int *)
			MemoryContextAllocZero(hashtable->batchCxt,
								   mcvsToUse * sizeof(int));

		hashtable->spaceUsed += nbuckets * sizeof(HashSkewBucket *)
			+ mcvsToUse * sizeof(int);
		hashtable->spaceUsedSkew += nbuckets * sizeof(HashSkewBucket *)
			+ mcvsToUse * sizeof(int);
		if (hashtable->spaceUsed > hashtable->spacePeak)
			hashtable->spacePeak = hashtable->spaceUsed;

		/*
		 * Create a skew bucket for each MCV hash value.
		 *
		 * Note: it is very important that we create the buckets in order of
		 * decreasing MCV frequency.  If we have to remove some buckets, they
		 * must be removed in reverse order of creation (see notes in
		 * ExecHashRemoveNextSkewBucket) and we want the least common MCVs to
		 * be removed first.
		 */
		hashfunctions = hashtable->outer_hashfunctions;

		for (i = 0; i < mcvsToUse; i++)
		{
			uint32		hashvalue;
			int			bucket;

			hashvalue = DatumGetUInt32(FunctionCall1Coll(&hashfunctions[0],
														 hashtable->collations[0],
														 sslot.values[i]));

			/*
			 * While we have not hit a hole in the hashtable and have not hit
			 * the desired bucket, we have collided with some previous hash
			 * value, so try the next bucket location.  NB: this code must
			 * match ExecHashGetSkewBucket.
			 */
			bucket = hashvalue & (nbuckets - 1);
			while (hashtable->skewBucket[bucket] != NULL &&
				   hashtable->skewBucket[bucket]->hashvalue != hashvalue)
				bucket = (bucket + 1) & (nbuckets - 1);

			/*
			 * If we found an existing bucket with the same hashvalue, leave
			 * it alone.  It's okay for two MCVs to share a hashvalue.
			 */
			if (hashtable->skewBucket[bucket] != NULL)
				continue;

			/* Okay, create a new skew bucket for this hashvalue. */
			hashtable->skewBucket[bucket] = (HashSkewBucket *)
				MemoryContextAlloc(hashtable->batchCxt,
								   sizeof(HashSkewBucket));
			hashtable->skewBucket[bucket]->hashvalue = hashvalue;
			hashtable->skewBucket[bucket]->tuples = NULL;
			hashtable->skewBucketNums[hashtable->nSkewBuckets] = bucket;
			hashtable->nSkewBuckets++;
			hashtable->spaceUsed += SKEW_BUCKET_OVERHEAD;
			hashtable->spaceUsedSkew += SKEW_BUCKET_OVERHEAD;
			if (hashtable->spaceUsed > hashtable->spacePeak)
				hashtable->spacePeak = hashtable->spaceUsed;
		}

		free_attstatsslot(&sslot);
	}

	ReleaseSysCache(statsTuple);
}

/*
 * ExecHashGetSkewBucket
 *
 *		Returns the index of the skew bucket for this hashvalue,
 *		or INVALID_SKEW_BUCKET_NO if the hashvalue is not
 *		associated with any active skew bucket.
 */
int
ExecHashGetSkewBucket(HashJoinTable hashtable, uint32 hashvalue)
{
	int			bucket;

	/*
	 * Always return INVALID_SKEW_BUCKET_NO if not doing skew optimization (in
	 * particular, this happens after the initial batch is done).
	 */
	if (!hashtable->skewEnabled)
		return INVALID_SKEW_BUCKET_NO;

	/*
	 * Since skewBucketLen is a power of 2, we can do a modulo by ANDing.
	 */
	bucket = hashvalue & (hashtable->skewBucketLen - 1);

	/*
	 * While we have not hit a hole in the hashtable and have not hit the
	 * desired bucket, we have collided with some other hash value, so try the
	 * next bucket location.
	 */
	while (hashtable->skewBucket[bucket] != NULL &&
		   hashtable->skewBucket[bucket]->hashvalue != hashvalue)
		bucket = (bucket + 1) & (hashtable->skewBucketLen - 1);

	/*
	 * Found the desired bucket?
	 */
	if (hashtable->skewBucket[bucket] != NULL)
		return bucket;

	/*
	 * There must not be any hashtable entry for this hash value.
	 */
	return INVALID_SKEW_BUCKET_NO;
}

/*
 * ExecHashSkewTableInsert
 *
 *		Insert a tuple into the skew hashtable.
 *
 * This should generally match up with the current-batch case in
 * ExecHashTableInsert.
 */
static void
ExecHashSkewTableInsert(HashState *hashState,
						HashJoinTable hashtable,
						TupleTableSlot *slot,
						uint32 hashvalue,
						int bucketNumber)
{
	bool		shouldFree;
	MinimalTuple tuple = ExecFetchSlotMinimalTuple(slot, &shouldFree);
	HashJoinTuple hashTuple;
	int			hashTupleSize;

	/* Create the HashJoinTuple */
	hashTupleSize = HJTUPLE_OVERHEAD + tuple->t_len;
	hashTuple = (HashJoinTuple) MemoryContextAlloc(hashtable->batchCxt,
												   hashTupleSize);
	hashTuple->hashvalue = hashvalue;
	memcpy(HJTUPLE_MINTUPLE(hashTuple), tuple, tuple->t_len);
	HeapTupleHeaderClearMatch(HJTUPLE_MINTUPLE(hashTuple));

	/* Push it onto the front of the skew bucket's list */
	hashTuple->next.unshared = hashtable->skewBucket[bucketNumber]->tuples;
	hashtable->skewBucket[bucketNumber]->tuples = hashTuple;
	Assert(hashTuple != hashTuple->next.unshared);

	/* Account for space used, and back off if we've used too much */
	hashtable->spaceUsed += hashTupleSize;
	hashtable->spaceUsedSkew += hashTupleSize;
	if (hashtable->spaceUsed > hashtable->spacePeak)
		hashtable->spacePeak = hashtable->spaceUsed;
	while (hashtable->spaceUsedSkew > hashtable->spaceAllowedSkew)
		ExecHashRemoveNextSkewBucket(hashState, hashtable);

	/* Check we are not over the total spaceAllowed, either */
	if (hashtable->spaceUsed > hashtable->spaceAllowed)
		ExecHashIncreaseNumBatches(hashtable);

	if (shouldFree)
		heap_free_minimal_tuple(tuple);
}

/*
 *		ExecHashRemoveNextSkewBucket
 *
 *		Remove the least valuable skew bucket by pushing its tuples into
 *		the main hash table.
 */
static void
ExecHashRemoveNextSkewBucket(HashState *hashState, HashJoinTable hashtable)
{
	PlanState *ps = &hashState->ps;
	int			bucketToRemove;
	HashSkewBucket *bucket;
	uint32		hashvalue;
	int			bucketno;
	int			batchno;
	HashJoinTuple hashTuple;

	/* Locate the bucket to remove */
	bucketToRemove = hashtable->skewBucketNums[hashtable->nSkewBuckets - 1];
	bucket = hashtable->skewBucket[bucketToRemove];

	/*
	 * Calculate which bucket and batch the tuples belong to in the main
	 * hashtable.  They all have the same hash value, so it's the same for all
	 * of them.  Also note that it's not possible for nbatch to increase while
	 * we are processing the tuples.
	 */
	hashvalue = bucket->hashvalue;
	ExecHashGetBucketAndBatch(hashtable, hashvalue, &bucketno, &batchno);

	/* Process all tuples in the bucket */
	hashTuple = bucket->tuples;
	while (hashTuple != NULL)
	{
		HashJoinTuple nextHashTuple = hashTuple->next.unshared;
		MinimalTuple tuple;
		Size		tupleSize;

		/*
		 * This code must agree with ExecHashTableInsert.  We do not use
		 * ExecHashTableInsert directly as ExecHashTableInsert expects a
		 * TupleTableSlot while we already have HashJoinTuples.
		 */
		tuple = HJTUPLE_MINTUPLE(hashTuple);
		tupleSize = HJTUPLE_OVERHEAD + tuple->t_len;

		/* Decide whether to put the tuple in the hash table or a temp file */
		if (batchno == hashtable->curbatch)
		{
			/* Move the tuple to the main hash table */
			HashJoinTuple copyTuple;

			/*
			 * We must copy the tuple into the dense storage, else it will not
			 * be found by, eg, ExecHashIncreaseNumBatches.
			 */
			copyTuple = (HashJoinTuple) dense_alloc(hashtable, tupleSize);
			memcpy(copyTuple, hashTuple, tupleSize);
			pfree(hashTuple);

			copyTuple->next.unshared = hashtable->buckets.unshared[bucketno];
			hashtable->buckets.unshared[bucketno] = copyTuple;

			/* We have reduced skew space, but overall space doesn't change */
			hashtable->spaceUsedSkew -= tupleSize;
		}
		else
		{
			/* Put the tuple into a temp file for later batches */
			Assert(batchno > hashtable->curbatch);
			ExecHashJoinSaveTuple(ps, tuple,
								  hashvalue,
								  hashtable,
								  &hashtable->innerBatchFile[batchno], hashtable->bfCxt);
			pfree(hashTuple);
			hashtable->spaceUsed -= tupleSize;
			hashtable->spaceUsedSkew -= tupleSize;
		}

		hashTuple = nextHashTuple;

		/* allow this loop to be cancellable */
		CHECK_FOR_INTERRUPTS();
	}

	/*
	 * Free the bucket struct itself and reset the hashtable entry to NULL.
	 *
	 * NOTE: this is not nearly as simple as it looks on the surface, because
	 * of the possibility of collisions in the hashtable.  Suppose that hash
	 * values A and B collide at a particular hashtable entry, and that A was
	 * entered first so B gets shifted to a different table entry.  If we were
	 * to remove A first then ExecHashGetSkewBucket would mistakenly start
	 * reporting that B is not in the hashtable, because it would hit the NULL
	 * before finding B.  However, we always remove entries in the reverse
	 * order of creation, so this failure cannot happen.
	 */
	hashtable->skewBucket[bucketToRemove] = NULL;
	hashtable->nSkewBuckets--;
	pfree(bucket);
	hashtable->spaceUsed -= SKEW_BUCKET_OVERHEAD;
	hashtable->spaceUsedSkew -= SKEW_BUCKET_OVERHEAD;

	/*
	 * If we have removed all skew buckets then give up on skew optimization.
	 * Release the arrays since they aren't useful any more.
	 */
	if (hashtable->nSkewBuckets == 0)
	{
		hashtable->skewEnabled = false;
		pfree(hashtable->skewBucket);
		pfree(hashtable->skewBucketNums);
		hashtable->skewBucket = NULL;
		hashtable->skewBucketNums = NULL;
		hashtable->spaceUsed -= hashtable->spaceUsedSkew;
		hashtable->spaceUsedSkew = 0;
	}
}

/*
 * Reserve space in the DSM segment for instrumentation data.
 */
void
ExecHashEstimate(HashState *node, ParallelContext *pcxt)
{
	size_t		size;

	/* don't need this if not instrumenting or no workers */
	if (!node->ps.instrument || pcxt->nworkers == 0)
		return;

	size = mul_size(pcxt->nworkers, sizeof(HashInstrumentation));
	size = add_size(size, offsetof(SharedHashInfo, hinstrument));
	shm_toc_estimate_chunk(&pcxt->estimator, size);
	shm_toc_estimate_keys(&pcxt->estimator, 1);
}

/*
 * Set up a space in the DSM for all workers to record instrumentation data
 * about their hash table.
 */
void
ExecHashInitializeDSM(HashState *node, ParallelContext *pcxt)
{
	size_t		size;

	/* don't need this if not instrumenting or no workers */
	if (!node->ps.instrument || pcxt->nworkers == 0)
		return;

	size = offsetof(SharedHashInfo, hinstrument) +
		pcxt->nworkers * sizeof(HashInstrumentation);
	node->shared_info = (SharedHashInfo *) shm_toc_allocate(pcxt->toc, size);

	/* Each per-worker area must start out as zeroes. */
	memset(node->shared_info, 0, size);

	node->shared_info->num_workers = pcxt->nworkers;
	shm_toc_insert(pcxt->toc, node->ps.plan->plan_node_id,
				   node->shared_info);
}

/*
 * Locate the DSM space for hash table instrumentation data that we'll write
 * to at shutdown time.
 */
void
ExecHashInitializeWorker(HashState *node, ParallelWorkerContext *pwcxt)
{
	SharedHashInfo *shared_info;
	HashJoinState *hjstate = node->hashtable->hjstate;
	/* don't need this if not instrumenting */
	if (!node->ps.instrument || !hjstate)
		return;

	/*
	 * Find our entry in the shared area, and set up a pointer to it so that
	 * we'll accumulate stats there when shutting down or rebuilding the hash
	 * table.
	 */
	shared_info = (SharedHashInfo *)
		shm_toc_lookup(pwcxt->toc, node->ps.plan->plan_node_id, false);
	Assert(hjstate->worker_id >= 1);
	node->hinstrument = &shared_info->hinstrument[hjstate->worker_id - 1];
}

/*
 * Collect EXPLAIN stats if needed, saving them into DSM memory if
 * ExecHashInitializeWorker was called, or local storage if not.  In the
 * parallel case, this must be done in ExecShutdownHash() rather than
 * ExecEndHash() because the latter runs after we've detached from the DSM
 * segment.
 */
void
ExecShutdownHash(HashState *node)
{
	/* Allocate save space if EXPLAIN'ing and we didn't do so already */
	if (node->ps.instrument && !node->hinstrument)
		node->hinstrument = palloc0_object(HashInstrumentation);
	/* Now accumulate data for the current (final) hash table */
	if (node->hinstrument && node->hashtable)
		ExecHashAccumInstrumentation(node->hinstrument, node->hashtable);
}

/*
 * Retrieve instrumentation data from workers before the DSM segment is
 * detached, so that EXPLAIN can access it.
 */
void
ExecHashRetrieveInstrumentation(HashState *node)
{
	SharedHashInfo *shared_info = node->shared_info;
	size_t		size;


	if (shared_info == NULL)
		return;

	/* Replace node->shared_info with a copy in backend-local memory. */
	size = offsetof(SharedHashInfo, hinstrument) +
		shared_info->num_workers * sizeof(HashInstrumentation);
	node->shared_info = palloc(size);
	memcpy(node->shared_info, shared_info, size);
}

/*
 * Accumulate instrumentation data from 'hashtable' into an
 * initially-zeroed HashInstrumentation struct.
 *
 * This is used to merge information across successive hash table instances
 * within a single plan node.  We take the maximum values of each interesting
 * number.  The largest nbuckets and largest nbatch values might have occurred
 * in different instances, so there's some risk of confusion from reporting
 * unrelated numbers; but there's a bigger risk of misdiagnosing a performance
 * issue if we don't report the largest values.  Similarly, we want to report
 * the largest spacePeak regardless of whether it happened in the same
 * instance as the largest nbuckets or nbatch.  All the instances should have
 * the same nbuckets_original and nbatch_original; but there's little value
 * in depending on that here, so handle them the same way.
 */
void
ExecHashAccumInstrumentation(HashInstrumentation *instrument,
							 HashJoinTable hashtable)
{
	instrument->nbuckets = Max(instrument->nbuckets,
							   hashtable->nbuckets);
	instrument->nbuckets_original = Max(instrument->nbuckets_original,
										hashtable->nbuckets_original);
	instrument->nbatch = Max(instrument->nbatch,
							 hashtable->nbatch);
	instrument->nbatch_original = Max(instrument->nbatch_original,
									  hashtable->nbatch_original);
	instrument->space_peak = Max(instrument->space_peak,
								 hashtable->spacePeak);
}

/*
 * Allocate 'size' bytes from the currently active HashMemoryChunk
 */
static void *
dense_alloc(HashJoinTable hashtable, Size size)
{
	HashMemoryChunk newChunk;
	char	   *ptr;

	/* just in case the size is not already aligned properly */
	size = MAXALIGN(size);

	/*
	 * If tuple size is larger than threshold, allocate a separate chunk.
	 */
	if (size > HASH_CHUNK_THRESHOLD)
	{
		/* allocate new chunk and put it at the beginning of the list */
		newChunk = (HashMemoryChunk) MemoryContextAlloc(hashtable->batchCxt,
														HASH_CHUNK_HEADER_SIZE + size);
		newChunk->maxlen = size;
		newChunk->used = size;
		newChunk->ntuples = 1;

		/*
		 * Add this chunk to the list after the first existing chunk, so that
		 * we don't lose the remaining space in the "current" chunk.
		 */
		if (hashtable->chunks != NULL)
		{
			newChunk->next = hashtable->chunks->next;
			hashtable->chunks->next.unshared = newChunk;
		}
		else
		{
			newChunk->next.unshared = hashtable->chunks;
			hashtable->chunks = newChunk;
		}

		return HASH_CHUNK_DATA(newChunk);
	}

	/*
	 * See if we have enough space for it in the current chunk (if any). If
	 * not, allocate a fresh chunk.
	 */
	if ((hashtable->chunks == NULL) ||
		(hashtable->chunks->maxlen - hashtable->chunks->used) < size)
	{
		/* allocate new chunk and put it at the beginning of the list */
		newChunk = (HashMemoryChunk) MemoryContextAlloc(hashtable->batchCxt,
														HASH_CHUNK_HEADER_SIZE + HASH_CHUNK_SIZE);

		newChunk->maxlen = HASH_CHUNK_SIZE;
		newChunk->used = size;
		newChunk->ntuples = 1;

		newChunk->next.unshared = hashtable->chunks;
		hashtable->chunks = newChunk;

		return HASH_CHUNK_DATA(newChunk);
	}

	/* There is enough space in the current chunk, let's add the tuple */
	ptr = HASH_CHUNK_DATA(hashtable->chunks) + hashtable->chunks->used;
	hashtable->chunks->used += size;
	hashtable->chunks->ntuples += 1;

	/* return pointer to the start of the tuple memory */
	return ptr;
}

/*
 * Allocate space for a tuple in shared dense storage.  This is equivalent to
 * dense_alloc but for Parallel Hash using shared memory.
 *
 * While loading a tuple into shared memory, we might run out of memory and
 * decide to repartition, or determine that the load factor is too high and
 * decide to expand the bucket array, or discover that another participant has
 * commanded us to help do that.  Return NULL if number of buckets or batches
 * has changed, indicating that the caller must retry (considering the
 * possibility that the tuple no longer belongs in the same batch).
 */
static HashJoinTuple
ExecParallelHashTupleAlloc(HashJoinTable hashtable, size_t size,
						   dsa_pointer *shared)
{
	ParallelHashJoinState *pstate = hashtable->parallel_state;
	dsa_pointer chunk_shared;
	HashMemoryChunk chunk;
	Size		chunk_size;
	HashJoinTuple result;
	int			curbatch = hashtable->curbatch;

	size = MAXALIGN(size);

	/*
	 * Fast path: if there is enough space in this backend's current chunk,
	 * then we can allocate without any locking.
	 */
	chunk = hashtable->current_chunk;
	if (chunk != NULL &&
		size <= HASH_CHUNK_THRESHOLD &&
		chunk->maxlen - chunk->used >= size)
	{

		chunk_shared = hashtable->current_chunk_shared;
		Assert(chunk == dsa_get_address(hashtable->area, chunk_shared));
		*shared = chunk_shared + HASH_CHUNK_HEADER_SIZE + chunk->used;
		result = (HashJoinTuple) (HASH_CHUNK_DATA(chunk) + chunk->used);
		chunk->used += size;

		Assert(chunk->used <= chunk->maxlen);
		Assert(result == dsa_get_address(hashtable->area, *shared));

		return result;
	}

	/* Slow path: try to allocate a new chunk. */
	LWLockAcquire(&pstate->lock, LW_EXCLUSIVE);

	/*
	 * Check if we need to help increase the number of buckets or batches.
	 */
	if (pstate->growth == PHJ_GROWTH_NEED_MORE_BATCHES ||
		pstate->growth == PHJ_GROWTH_NEED_MORE_BUCKETS)
	{
		ParallelHashGrowth growth = pstate->growth;

		hashtable->current_chunk = NULL;
		LWLockRelease(&pstate->lock);

		/* Another participant has commanded us to help grow. */
		if (growth == PHJ_GROWTH_NEED_MORE_BATCHES)
			ExecParallelHashIncreaseNumBatches(hashtable);
		else if (growth == PHJ_GROWTH_NEED_MORE_BUCKETS)
			ExecParallelHashIncreaseNumBuckets(hashtable);

		/* The caller must retry. */
		return NULL;
	}

	/* Oversized tuples get their own chunk. */
	if (size > HASH_CHUNK_THRESHOLD)
		chunk_size = size + HASH_CHUNK_HEADER_SIZE;
	else
		chunk_size = HASH_CHUNK_SIZE;

	/* Check if it's time to grow batches or buckets. */
	if (pstate->growth != PHJ_GROWTH_DISABLED)
	{
		Assert(curbatch == 0);
		Assert(BarrierPhase(&pstate->build_barrier) == PHJ_BUILD_HASH_INNER);

		/*
		 * Check if our space limit would be exceeded.  To avoid choking on
		 * very large tuples or very low hash_mem setting, we'll always allow
		 * each backend to allocate at least one chunk.
		 */
		if (hashtable->batches[0].at_least_one_chunk &&
			hashtable->batches[0].shared->size +
			chunk_size > pstate->space_allowed)
		{
			pstate->growth = PHJ_GROWTH_NEED_MORE_BATCHES;
			hashtable->batches[0].shared->space_exhausted = true;
			LWLockRelease(&pstate->lock);

			return NULL;
		}

		/* Check if our load factor limit would be exceeded. */
		if (hashtable->nbatch == 1)
		{
			hashtable->batches[0].shared->ntuples += hashtable->batches[0].ntuples;
			hashtable->batches[0].ntuples = 0;
			/* Guard against integer overflow and alloc size overflow */
			if (hashtable->batches[0].shared->ntuples + 1 >
				hashtable->nbuckets * gp_hashjoin_tuples_per_bucket &&
				hashtable->nbuckets < (INT_MAX / 2) &&
				hashtable->nbuckets * 2 <=
				MaxAllocSize / sizeof(dsa_pointer_atomic))
			{
				pstate->growth = PHJ_GROWTH_NEED_MORE_BUCKETS;
				LWLockRelease(&pstate->lock);

				return NULL;
			}
		}
	}

	/* We are cleared to allocate a new chunk. */
	chunk_shared = dsa_allocate(hashtable->area, chunk_size);
	hashtable->batches[curbatch].shared->size += chunk_size;
	hashtable->batches[curbatch].at_least_one_chunk = true;

	/* Set up the chunk. */
	chunk = (HashMemoryChunk) dsa_get_address(hashtable->area, chunk_shared);
	*shared = chunk_shared + HASH_CHUNK_HEADER_SIZE;
	chunk->maxlen = chunk_size - HASH_CHUNK_HEADER_SIZE;
	chunk->used = size;

	/*
	 * Push it onto the list of chunks, so that it can be found if we need to
	 * increase the number of buckets or batches (batch 0 only) and later for
	 * freeing the memory (all batches).
	 */
	chunk->next.shared = hashtable->batches[curbatch].shared->chunks;
	hashtable->batches[curbatch].shared->chunks = chunk_shared;

	if (size <= HASH_CHUNK_THRESHOLD)
	{
		/*
		 * Make this the current chunk so that we can use the fast path to
		 * fill the rest of it up in future calls.
		 */
		hashtable->current_chunk = chunk;
		hashtable->current_chunk_shared = chunk_shared;
	}
	LWLockRelease(&pstate->lock);

	Assert(HASH_CHUNK_DATA(chunk) == dsa_get_address(hashtable->area, *shared));
	result = (HashJoinTuple) HASH_CHUNK_DATA(chunk);

	return result;
}

/*
 * One backend needs to set up the shared batch state including tuplestores.
 * Other backends will ensure they have correctly configured accessors by
 * called ExecParallelHashEnsureBatchAccessors().
 */
static void
ExecParallelHashJoinSetUpBatches(HashJoinTable hashtable, int nbatch)
{
	ParallelHashJoinState *pstate = hashtable->parallel_state;
	ParallelHashJoinBatch *batches;
	MemoryContext oldcxt;
	int			i;

	Assert(hashtable->batches == NULL);

	/* Allocate space. */
	pstate->batches =
		dsa_allocate0(hashtable->area,
					  EstimateParallelHashJoinBatch(hashtable) * nbatch);
	pstate->nbatch = nbatch;
	batches = dsa_get_address(hashtable->area, pstate->batches);

	/*
	 * Use hash join spill memory context to allocate accessors, including
	 * buffers for the temporary files.
	 */
	oldcxt = MemoryContextSwitchTo(hashtable->spillCxt);

	/* Allocate this backend's accessor array. */
	hashtable->nbatch = nbatch;
	hashtable->batches =
		palloc0_array(ParallelHashJoinBatchAccessor, hashtable->nbatch);

	/* Set up the shared state, tuplestores and backend-local accessors. */
	for (i = 0; i < hashtable->nbatch; ++i)
	{
		ParallelHashJoinBatchAccessor *accessor = &hashtable->batches[i];
		ParallelHashJoinBatch *shared = NthParallelHashJoinBatch(batches, i);
		char		name[MAXPGPATH];

		/*
		 * All members of shared were zero-initialized.  We just need to set
		 * up the Barrier.
		 */
		BarrierInit(&shared->batch_barrier, 0);
		if (i == 0)
		{
			/* Batch 0 doesn't need to be loaded. */
			BarrierAttach(&shared->batch_barrier);
			while (BarrierPhase(&shared->batch_barrier) < PHJ_BATCH_PROBE)
				BarrierArriveAndWait(&shared->batch_barrier, 0);
			BarrierDetach(&shared->batch_barrier);
		}

		/* Initialize accessor state.  All members were zero-initialized. */
		accessor->shared = shared;

		/* Initialize the shared tuplestores. */
		snprintf(name, sizeof(name), "i%dof%d", i, hashtable->nbatch);
		accessor->inner_tuples =
			sts_initialize(ParallelHashJoinBatchInner(shared),
						   pstate->nparticipants,
						   hashtable->hjstate->worker_id,
						   sizeof(uint32),
						   SHARED_TUPLESTORE_SINGLE_PASS,
						   &pstate->fileset,
						   name);
		snprintf(name, sizeof(name), "o%dof%d", i, hashtable->nbatch);
		accessor->outer_tuples =
			sts_initialize(ParallelHashJoinBatchOuter(shared,
													  pstate->nparticipants),
						   pstate->nparticipants,
						   hashtable->hjstate->worker_id,
						   sizeof(uint32),
						   SHARED_TUPLESTORE_SINGLE_PASS,
						   &pstate->fileset,
						   name);
	}

	MemoryContextSwitchTo(oldcxt);
}

/*
 * Free the current set of ParallelHashJoinBatchAccessor objects.
 */
static void
ExecParallelHashCloseBatchAccessors(HashJoinTable hashtable)
{
	int			i;

	for (i = 0; i < hashtable->nbatch; ++i)
	{
		/* Make sure no files are left open. */
		sts_end_write(hashtable->batches[i].inner_tuples);
		sts_end_write(hashtable->batches[i].outer_tuples);
		sts_end_parallel_scan(hashtable->batches[i].inner_tuples);
		sts_end_parallel_scan(hashtable->batches[i].outer_tuples);
	}
	pfree(hashtable->batches);
	hashtable->batches = NULL;
}

/*
 * Make sure this backend has up-to-date accessors for the current set of
 * batches.
 */
static void
ExecParallelHashEnsureBatchAccessors(HashJoinTable hashtable)
{
	ParallelHashJoinState *pstate = hashtable->parallel_state;
	ParallelHashJoinBatch *batches;
	MemoryContext oldcxt;
	int			i;

	if (hashtable->batches != NULL)
	{
		if (hashtable->nbatch == pstate->nbatch)
			return;
		ExecParallelHashCloseBatchAccessors(hashtable);
	}

	/*
	 * We should never see a state where the batch-tracking array is freed,
	 * because we should have given up sooner if we join when the build
	 * barrier has reached the PHJ_BUILD_FREE phase.
	 */
	Assert(DsaPointerIsValid(pstate->batches));

	/*
	 * Use hash join spill memory context to allocate accessors, including
	 * buffers for the temporary files.
	 */
	oldcxt = MemoryContextSwitchTo(hashtable->spillCxt);

	/* Allocate this backend's accessor array. */
	hashtable->nbatch = pstate->nbatch;
	hashtable->batches =
		palloc0_array(ParallelHashJoinBatchAccessor, hashtable->nbatch);

	/* Find the base of the pseudo-array of ParallelHashJoinBatch objects. */
	batches = (ParallelHashJoinBatch *)
		dsa_get_address(hashtable->area, pstate->batches);

	/* Set up the accessor array and attach to the tuplestores. */
	for (i = 0; i < hashtable->nbatch; ++i)
	{
		ParallelHashJoinBatchAccessor *accessor = &hashtable->batches[i];
		ParallelHashJoinBatch *shared = NthParallelHashJoinBatch(batches, i);

		accessor->shared = shared;
		accessor->preallocated = 0;
		accessor->done = false;
		accessor->outer_eof = false;
		accessor->inner_tuples =
			sts_attach(ParallelHashJoinBatchInner(shared),
					   hashtable->hjstate->worker_id,
					   &pstate->fileset);
		accessor->outer_tuples =
			sts_attach(ParallelHashJoinBatchOuter(shared,
												  pstate->nparticipants),
					   hashtable->hjstate->worker_id,
					   &pstate->fileset);
	}

	MemoryContextSwitchTo(oldcxt);
}

/*
 * Allocate an empty shared memory hash table for a given batch.
 */
void
ExecParallelHashTableAlloc(HashJoinTable hashtable, int batchno)
{
	ParallelHashJoinBatch *batch = hashtable->batches[batchno].shared;
	dsa_pointer_atomic *buckets;
	int			nbuckets = hashtable->parallel_state->nbuckets;
	int			i;

	batch->buckets =
		dsa_allocate(hashtable->area, sizeof(dsa_pointer_atomic) * nbuckets);
	buckets = (dsa_pointer_atomic *)
		dsa_get_address(hashtable->area, batch->buckets);
	for (i = 0; i < nbuckets; ++i)
		dsa_pointer_atomic_init(&buckets[i], InvalidDsaPointer);
}

/*
 * If we are currently attached to a shared hash join batch, detach.  If we
 * are last to detach, clean up.
 */
void
ExecHashTableDetachBatch(HashJoinTable hashtable)
{
	if (hashtable->parallel_state != NULL &&
		hashtable->curbatch >= 0)
	{
		int			curbatch = hashtable->curbatch;
		ParallelHashJoinBatch *batch = hashtable->batches[curbatch].shared;
		bool		attached = true;

		/* Make sure any temporary files are closed. */
		sts_end_parallel_scan(hashtable->batches[curbatch].inner_tuples);
		sts_end_parallel_scan(hashtable->batches[curbatch].outer_tuples);

		/* After attaching we always get at least to PHJ_BATCH_PROBING. */
		Assert(BarrierPhase(&batch->batch_barrier) == PHJ_BATCH_PROBE ||
			   BarrierPhase(&batch->batch_barrier) == PHJ_BATCH_SCAN);

		/*
		 * If we're abandoning the PHJ_BATCH_PROBING phase early without having
		 * reached the end of it, it means the plan doesn't want any more
		 * tuples, and it is happy to abandon any tuples buffered in this
		 * process's subplans.  For correctness, we can't allow any process to
		 * execute the PHJ_BATCH_SCAN phase, because we will never have the
		 * complete set of match bits.  Therefore we skip emitting unmatched
		 * tuples in all backends (if this is a full/right join), as if those
		 * tuples were all due to be emitted by this process and it has
		 * abandoned them too.
		 */
		/*
		 * CBDB_PARALLEL: Parallel Hash Left Anti Semi (Not-In) Join(parallel-aware)
		 * If phs_lasj_has_null is true, that means we have found null when building hash table,
		 * there were no batches to detach.
		 */
		if (BarrierPhase(&batch->batch_barrier) == PHJ_BATCH_PROBE &&
			!hashtable->parallel_state->phs_lasj_has_null && /* CBDB_PARALLEL */
			!hashtable->batches[curbatch].outer_eof)
		{
			/*
			 * This flag may be written to by multiple backends during
			 * PHJ_BATCH_PROBING phase, but will only be read in PHJ_BATCH_SCAN
			 * phase so requires no extra locking.
			 */
			batch->skip_unmatched = true;
		}

		/*
		 * Even if we aren't doing a full/right outer join, we'll step through
		 * the PHJ_BATCH_SCAN phase just to maintain the invariant that
		 * freeing happens in PHJ_BATCH_FREE, but that'll be wait-free.
		 */
		if (BarrierPhase(&batch->batch_barrier) == PHJ_BATCH_PROBE &&
			!hashtable->parallel_state->phs_lasj_has_null /* CBDB_PARALLEL */)
			attached = BarrierArriveAndDetachExceptLast(&batch->batch_barrier);
		if (attached && !hashtable->parallel_state->phs_lasj_has_null /* CBDB_PARALLEL */ &&
			BarrierArriveAndDetach(&batch->batch_barrier))
		{
			/*
			 * We are not longer attached to the batch barrier, but we're the
			 * process that was chosen to free resources and it's safe to
			 * assert the current phase.  The ParallelHashJoinBatch can't go
			 * away underneath us while we are attached to the build barrier,
			 * making this access safe.
			 */
			Assert(BarrierPhase(&batch->batch_barrier) == PHJ_BATCH_FREE);

			/* Free shared chunks and buckets. */
			while (DsaPointerIsValid(batch->chunks))
			{
				HashMemoryChunk chunk =
					dsa_get_address(hashtable->area, batch->chunks);
				dsa_pointer next = chunk->next.shared;

				dsa_free(hashtable->area, batch->chunks);
				batch->chunks = next;
			}
			if (DsaPointerIsValid(batch->buckets))
			{
				dsa_free(hashtable->area, batch->buckets);
				batch->buckets = InvalidDsaPointer;
			}
		}

		/*
		 * Track the largest batch we've been attached to.  Though each
		 * backend might see a different subset of batches, explain.c will
		 * scan the results from all backends to find the largest value.
		 */
		hashtable->spacePeak =
			Max(hashtable->spacePeak,
				batch->size + sizeof(dsa_pointer_atomic) * hashtable->nbuckets);

		/* Remember that we are not attached to a batch. */
		hashtable->curbatch = -1;
	}
}

/*
 * Detach from all shared resources.  If we are last to detach, clean up.
 */
void
ExecHashTableDetach(HashJoinTable hashtable)
{
	ParallelHashJoinState *pstate = hashtable->parallel_state;

	if (pstate && BarrierPhase(&pstate->build_barrier) == PHJ_BUILD_RUN)
	{
		int			i;

		/* Make sure any temporary files are closed. */
		if (hashtable->batches)
		{
			for (i = 0; i < hashtable->nbatch; ++i)
			{
				sts_end_write(hashtable->batches[i].inner_tuples);
				sts_end_write(hashtable->batches[i].outer_tuples);
				sts_end_parallel_scan(hashtable->batches[i].inner_tuples);
				sts_end_parallel_scan(hashtable->batches[i].outer_tuples);
			}
		}

		/* If we're last to detach, clean up shared memory. */
		if (BarrierArriveAndDetach(&pstate->build_barrier))
		{
			/*
			 * Late joining processes will see this state and give up
			 * immediately.
			 */
			Assert(BarrierPhase(&pstate->build_barrier) == PHJ_BUILD_FREE);

			if (DsaPointerIsValid(pstate->batches))
			{
				dsa_free(hashtable->area, pstate->batches);
				pstate->batches = InvalidDsaPointer;
			}
		}
	}
	hashtable->parallel_state = NULL;
}

/*
 * Get the first tuple in a given bucket identified by number.
 */
static inline HashJoinTuple
ExecParallelHashFirstTuple(HashJoinTable hashtable, int bucketno)
{
	HashJoinTuple tuple;
	dsa_pointer p;

	Assert(hashtable->parallel_state);
	p = dsa_pointer_atomic_read(&hashtable->buckets.shared[bucketno]);
	tuple = (HashJoinTuple) dsa_get_address(hashtable->area, p);

	return tuple;
}

/*
 * Get the next tuple in the same bucket as 'tuple'.
 */
static inline HashJoinTuple
ExecParallelHashNextTuple(HashJoinTable hashtable, HashJoinTuple tuple)
{
	HashJoinTuple next;

	Assert(hashtable->parallel_state);
	next = (HashJoinTuple) dsa_get_address(hashtable->area, tuple->next.shared);

	return next;
}

/*
 * Insert a tuple at the front of a chain of tuples in DSA memory atomically.
 */
static inline void
ExecParallelHashPushTuple(dsa_pointer_atomic *head,
						  HashJoinTuple tuple,
						  dsa_pointer tuple_shared)
{
	for (;;)
	{
		tuple->next.shared = dsa_pointer_atomic_read(head);
		if (dsa_pointer_atomic_compare_exchange(head,
												&tuple->next.shared,
												tuple_shared))
			break;
	}
}

/*
 * Prepare to work on a given batch.
 */
void
ExecParallelHashTableSetCurrentBatch(HashJoinTable hashtable, int batchno)
{
	Assert(hashtable->batches[batchno].shared->buckets != InvalidDsaPointer);

	hashtable->curbatch = batchno;
	hashtable->buckets.shared = (dsa_pointer_atomic *)
		dsa_get_address(hashtable->area,
						hashtable->batches[batchno].shared->buckets);
	hashtable->nbuckets = hashtable->parallel_state->nbuckets;
	hashtable->log2_nbuckets = my_log2(hashtable->nbuckets);
	hashtable->current_chunk = NULL;
	hashtable->current_chunk_shared = InvalidDsaPointer;
	hashtable->batches[batchno].at_least_one_chunk = false;
}

/*
 * Take the next available chunk from the queue of chunks being worked on in
 * parallel.  Return NULL if there are none left.  Otherwise return a pointer
 * to the chunk, and set *shared to the DSA pointer to the chunk.
 */
static HashMemoryChunk
ExecParallelHashPopChunkQueue(HashJoinTable hashtable, dsa_pointer *shared)
{
	ParallelHashJoinState *pstate = hashtable->parallel_state;
	HashMemoryChunk chunk;

	LWLockAcquire(&pstate->lock, LW_EXCLUSIVE);
	if (DsaPointerIsValid(pstate->chunk_work_queue))
	{
		*shared = pstate->chunk_work_queue;
		chunk = (HashMemoryChunk)
			dsa_get_address(hashtable->area, *shared);
		pstate->chunk_work_queue = chunk->next.shared;
	}
	else
		chunk = NULL;
	LWLockRelease(&pstate->lock);

	return chunk;
}

/*
 * Increase the space preallocated in this backend for a given inner batch by
 * at least a given amount.  This allows us to track whether a given batch
 * would fit in memory when loaded back in.  Also increase the number of
 * batches or buckets if required.
 *
 * This maintains a running estimation of how much space will be taken when we
 * load the batch back into memory by simulating the way chunks will be handed
 * out to workers.  It's not perfectly accurate because the tuples will be
 * packed into memory chunks differently by ExecParallelHashTupleAlloc(), but
 * it should be pretty close.  It tends to overestimate by a fraction of a
 * chunk per worker since all workers gang up to preallocate during hashing,
 * but workers tend to reload batches alone if there are enough to go around,
 * leaving fewer partially filled chunks.  This effect is bounded by
 * nparticipants.
 *
 * Return false if the number of batches or buckets has changed, and the
 * caller should reconsider which batch a given tuple now belongs in and call
 * again.
 */
static bool
ExecParallelHashTuplePrealloc(HashJoinTable hashtable, int batchno, size_t size)
{
	ParallelHashJoinState *pstate = hashtable->parallel_state;
	ParallelHashJoinBatchAccessor *batch = &hashtable->batches[batchno];
	size_t		want = Max(size, HASH_CHUNK_SIZE - HASH_CHUNK_HEADER_SIZE);

	Assert(batchno > 0);
	Assert(batchno < hashtable->nbatch);
	Assert(size == MAXALIGN(size));

	LWLockAcquire(&pstate->lock, LW_EXCLUSIVE);

	/* Has another participant commanded us to help grow? */
	if (pstate->growth == PHJ_GROWTH_NEED_MORE_BATCHES ||
		pstate->growth == PHJ_GROWTH_NEED_MORE_BUCKETS)
	{
		ParallelHashGrowth growth = pstate->growth;

		LWLockRelease(&pstate->lock);
		if (growth == PHJ_GROWTH_NEED_MORE_BATCHES)
			ExecParallelHashIncreaseNumBatches(hashtable);
		else if (growth == PHJ_GROWTH_NEED_MORE_BUCKETS)
			ExecParallelHashIncreaseNumBuckets(hashtable);

		return false;
	}

	if (pstate->growth != PHJ_GROWTH_DISABLED &&
		batch->at_least_one_chunk &&
		(batch->shared->estimated_size + want + HASH_CHUNK_HEADER_SIZE
		 > pstate->space_allowed))
	{
		/*
		 * We have determined that this batch would exceed the space budget if
		 * loaded into memory.  Command all participants to help repartition.
		 */
		batch->shared->space_exhausted = true;
		pstate->growth = PHJ_GROWTH_NEED_MORE_BATCHES;
		LWLockRelease(&pstate->lock);

		return false;
	}

	batch->at_least_one_chunk = true;
	batch->shared->estimated_size += want + HASH_CHUNK_HEADER_SIZE;
	batch->preallocated = want;
	LWLockRelease(&pstate->lock);

	return true;
}

/*
 * Calculate the limit on how much memory can be used by Hash and similar
 * plan types.  This is work_mem times hash_mem_multiplier, and is
 * expressed in bytes.
 *
 * Exported for use by the planner, as well as other hash-like executor
 * nodes.  This is a rather random place for this, but there is no better
 * place.
 * 
 * GPDB_14_MERGE_FIXME: Postgres uses work_mem to control the memory usage of a query operation(e.g. sort and hash table),
 * while Greenplum use statement_mem to control the memory used by a statement.
 * Although work_mem is marked as deprecated, there are many places of our code using it,
 * which introduces confusion for developers.  We will unify these two configurations someday.
 * Besides work_mem, Postgres also uses hash_mem_multiplier to increase the memory usage of hash table
 * to avoid spilling to disk.  Currently, it's used by get_hash_memory_limit to control the memory usage,
 * and no other places actually need it to multiply with work_mem.
 */
size_t
get_hash_memory_limit(void)
{
	double		mem_limit;

	/* Do initial calculation in double arithmetic */
	mem_limit = (double) work_mem * hash_mem_multiplier * 1024.0;

	/* Clamp in case it doesn't fit in size_t */
	mem_limit = Min(mem_limit, (double) SIZE_MAX);

	return (size_t) mem_limit;
}

/*
 * Convert AttrFilter to ScanKeyData and send these runtime filters to the
 * target node(seqscan).
 */
void
PushdownRuntimeFilter(HashState *node)
{
	ListCell	*lc;
	List		*scankeys;
	ScanKey		sk;
	AttrFilter	*attr_filter;

	foreach (lc, node->filters)
	{
		scankeys = NIL;

		attr_filter = lfirst(lc);
		if (attr_filter->empty ||
			(!IsA(attr_filter->target, SeqScanState) &&
			 !IsA(attr_filter->target, DynamicSeqScanState)))
			continue;

		/* bloom filter */
		sk = (ScanKey)palloc0(sizeof(ScanKeyData));
		sk->sk_flags    = SK_BLOOM_FILTER;
		sk->sk_attno    = attr_filter->lattno;
		sk->sk_subtype  = INT8OID;
		sk->sk_argument = PointerGetDatum(attr_filter->blm_filter);
		scankeys = lappend(scankeys, sk);

		/* range filter */
		sk = (ScanKey)palloc0(sizeof(ScanKeyData));
		sk->sk_flags    = 0;
		sk->sk_attno    = attr_filter->lattno;
		sk->sk_strategy = BTGreaterEqualStrategyNumber;
		sk->sk_subtype  = INT8OID;
		sk->sk_argument = attr_filter->min;
		scankeys = lappend(scankeys, sk);

		sk = (ScanKey)palloc0(sizeof(ScanKeyData));
		sk->sk_flags    = 0;
		sk->sk_attno    = attr_filter->lattno;
		sk->sk_strategy = BTLessEqualStrategyNumber;
		sk->sk_subtype  = INT8OID;
		sk->sk_argument = attr_filter->max;
		scankeys = lappend(scankeys, sk);

		/* append new runtime filters to target node */
		if (IsA(attr_filter->target, SeqScanState))
		{
			SeqScanState *sss = castNode(SeqScanState, attr_filter->target);
			sss->filters = list_concat(sss->filters, scankeys);
		}
		else if (IsA(attr_filter->target, DynamicSeqScanState))
		{
			DynamicSeqScanState *dsss = castNode(DynamicSeqScanState, attr_filter->target);
			dsss->filters = list_concat(dsss->filters, scankeys);
		}
		else
		{
			/* never reach here */
			pg_unreachable();
		}
	}
}

static void
AddTupleValuesIntoRF(HashState *node, TupleTableSlot *slot)
{
	Datum val;
	bool  isnull;
	ListCell	*lc;
	AttrFilter	*attr_filter;

	foreach (lc, node->filters)
	{
		attr_filter = (AttrFilter *) lfirst(lc);

		val = slot_getattr(slot, attr_filter->rattno, &isnull);
		if (isnull)
			continue;

		attr_filter->empty = false;

		if ((int64_t)val < (int64_t)attr_filter->min)
			attr_filter->min = val;

		if ((int64_t)val > (int64_t)attr_filter->max)
			attr_filter->max = val;

		if (attr_filter->blm_filter)
			bloom_add_element(attr_filter->blm_filter, (unsigned char *)&val, sizeof(Datum));
	}
}

void
FreeRuntimeFilter(HashState *node)
{
	ListCell	*lc;
	AttrFilter	*attr_filter;

	if (!node->filters)
		return;

	foreach (lc, node->filters)
	{
		attr_filter = lfirst(lc);
		if (attr_filter->blm_filter)
			bloom_free(attr_filter->blm_filter);
	}

	list_free_deep(node->filters);
	node->filters = NIL;
}

void
ResetRuntimeFilter(HashState *node)
{
	ListCell		*lc;
	AttrFilter		*attr_filter;
	SeqScanState	*sss;
	DynamicSeqScanState *dsss;

	if (!node->filters)
		return;

	foreach (lc, node->filters)
	{
		attr_filter = lfirst(lc);
		attr_filter->empty  = true;

		if (IsA(attr_filter->target, SeqScanState))
		{
			sss = castNode(SeqScanState, attr_filter->target);
			if (sss->filters)
			{
				list_free_deep(sss->filters);
				sss->filters = NIL;
			}
		}
		else if (IsA(attr_filter->target, DynamicSeqScanState))
		{
			dsss = castNode(DynamicSeqScanState, attr_filter->target);
			if (dsss->filters)
			{
				list_free_deep(dsss->filters);
				dsss->filters = NIL;
			}
		}
		else
		{
			/* never reach here */
			pg_unreachable();
		}

		if (attr_filter->blm_filter)
			bloom_free(attr_filter->blm_filter);

		attr_filter->blm_filter = bloom_create_aggresive(node->ps.plan->plan_rows,
														 work_mem,
														 random());

		StaticAssertDecl(sizeof(LONG_MAX) == sizeof(Datum), "sizeof(LONG_MAX) should be equal to sizeof(Datum)");
		StaticAssertDecl(sizeof(LONG_MIN) == sizeof(Datum), "sizeof(LONG_MIN) should be equal to sizeof(Datum)");
		attr_filter->min    = LONG_MAX;
		attr_filter->max    = LONG_MIN;
	}
}