<!--
doc/src/sgml/ref/select.sgml
PostgreSQL documentation
-->

<refentry id="sql-select">
 <indexterm zone="sql-select">
  <primary>SELECT</primary>
 </indexterm>

 <indexterm zone="sql-select">
  <primary>TABLE command</primary>
 </indexterm>

 <indexterm zone="sql-select">
  <primary>WITH</primary>
  <secondary>in SELECT</secondary>
 </indexterm>

 <refmeta>
  <refentrytitle>SELECT</refentrytitle>
  <manvolnum>7</manvolnum>
  <refmiscinfo>SQL - Language Statements</refmiscinfo>
 </refmeta>

 <refnamediv>
  <refname>SELECT</refname>
  <refname>TABLE</refname>
  <refname>WITH</refname>
  <refpurpose>retrieve rows from a table or view</refpurpose>
 </refnamediv>

 <refsynopsisdiv>
<synopsis>
[ WITH [ RECURSIVE ] <replaceable class="parameter">with_query</replaceable> [, ...] ]
SELECT [ ALL | DISTINCT [ ON ( <replaceable class="parameter">expression</replaceable> [, ...] ) ] ]
    [ { * | <replaceable class="parameter">expression</replaceable> [ [ AS ] <replaceable class="parameter">output_name</replaceable> ] } [, ...] ]
    [ FROM <replaceable class="parameter">from_item</replaceable> [, ...] ]
    [ WHERE <replaceable class="parameter">condition</replaceable> ]
    [ GROUP BY [ ALL | DISTINCT ] <replaceable class="parameter">grouping_element</replaceable> [, ...] ]
    [ HAVING <replaceable class="parameter">condition</replaceable> ]
    [ WINDOW <replaceable class="parameter">window_name</replaceable> AS ( <replaceable class="parameter">window_definition</replaceable> ) [, ...] ]
    [ { UNION | INTERSECT | EXCEPT } [ ALL | DISTINCT ] <replaceable class="parameter">select</replaceable> ]
    [ ORDER BY <replaceable class="parameter">expression</replaceable> [ ASC | DESC | USING <replaceable class="parameter">operator</replaceable> ] [ NULLS { FIRST | LAST } ] [, ...] ]
    [ LIMIT { <replaceable class="parameter">count</replaceable> | ALL } ]
    [ OFFSET <replaceable class="parameter">start</replaceable> [ ROW | ROWS ] ]
    [ FETCH { FIRST | NEXT } [ <replaceable class="parameter">count</replaceable> ] { ROW | ROWS } { ONLY | WITH TIES } ]
    [ FOR { UPDATE | NO KEY UPDATE | SHARE | KEY SHARE } [ OF <replaceable class="parameter">table_name</replaceable> [, ...] ] [ NOWAIT | SKIP LOCKED ] [...] ]

<phrase>where <replaceable class="parameter">from_item</replaceable> can be one of:</phrase>

    [ ONLY ] <replaceable class="parameter">table_name</replaceable> [ * ] [ [ AS ] <replaceable class="parameter">alias</replaceable> [ ( <replaceable class="parameter">column_alias</replaceable> [, ...] ) ] ]
                [ TABLESAMPLE <replaceable class="parameter">sampling_method</replaceable> ( <replaceable class="parameter">argument</replaceable> [, ...] ) [ REPEATABLE ( <replaceable class="parameter">seed</replaceable> ) ] ]
    [ LATERAL ] ( <replaceable class="parameter">select</replaceable> ) [ [ AS ] <replaceable class="parameter">alias</replaceable> [ ( <replaceable class="parameter">column_alias</replaceable> [, ...] ) ] ]
    <replaceable class="parameter">with_query_name</replaceable> [ [ AS ] <replaceable class="parameter">alias</replaceable> [ ( <replaceable class="parameter">column_alias</replaceable> [, ...] ) ] ]
    [ LATERAL ] <replaceable class="parameter">function_name</replaceable> ( [ <replaceable class="parameter">argument</replaceable> [, ...] ] )
                [ WITH ORDINALITY ] [ [ AS ] <replaceable class="parameter">alias</replaceable> [ ( <replaceable class="parameter">column_alias</replaceable> [, ...] ) ] ]
    [ LATERAL ] <replaceable class="parameter">function_name</replaceable> ( [ <replaceable class="parameter">argument</replaceable> [, ...] ] ) [ AS ] <replaceable class="parameter">alias</replaceable> ( <replaceable class="parameter">column_definition</replaceable> [, ...] )
    [ LATERAL ] <replaceable class="parameter">function_name</replaceable> ( [ <replaceable class="parameter">argument</replaceable> [, ...] ] ) AS ( <replaceable class="parameter">column_definition</replaceable> [, ...] )
    [ LATERAL ] ROWS FROM( <replaceable class="parameter">function_name</replaceable> ( [ <replaceable class="parameter">argument</replaceable> [, ...] ] ) [ AS ( <replaceable class="parameter">column_definition</replaceable> [, ...] ) ] [, ...] )
                [ WITH ORDINALITY ] [ [ AS ] <replaceable class="parameter">alias</replaceable> [ ( <replaceable class="parameter">column_alias</replaceable> [, ...] ) ] ]
    <replaceable class="parameter">from_item</replaceable> <replaceable class="parameter">join_type</replaceable> <replaceable class="parameter">from_item</replaceable> { ON <replaceable class="parameter">join_condition</replaceable> | USING ( <replaceable class="parameter">join_column</replaceable> [, ...] ) [ AS <replaceable class="parameter">join_using_alias</replaceable> ] }
    <replaceable class="parameter">from_item</replaceable> NATURAL <replaceable class="parameter">join_type</replaceable> <replaceable class="parameter">from_item</replaceable>
    <replaceable class="parameter">from_item</replaceable> CROSS JOIN <replaceable class="parameter">from_item</replaceable>

<phrase>and <replaceable class="parameter">grouping_element</replaceable> can be one of:</phrase>

    ( )
    <replaceable class="parameter">expression</replaceable>
    ( <replaceable class="parameter">expression</replaceable> [, ...] )
    ROLLUP ( { <replaceable class="parameter">expression</replaceable> | ( <replaceable class="parameter">expression</replaceable> [, ...] ) } [, ...] )
    CUBE ( { <replaceable class="parameter">expression</replaceable> | ( <replaceable class="parameter">expression</replaceable> [, ...] ) } [, ...] )
    GROUPING SETS ( <replaceable class="parameter">grouping_element</replaceable> [, ...] )

<phrase>and <replaceable class="parameter">with_query</replaceable> is:</phrase>

    <replaceable class="parameter">with_query_name</replaceable> [ ( <replaceable class="parameter">column_name</replaceable> [, ...] ) ] AS [ [ NOT ] MATERIALIZED ] ( <replaceable class="parameter">select</replaceable> | <replaceable class="parameter">values</replaceable> | <replaceable class="parameter">insert</replaceable> | <replaceable class="parameter">update</replaceable> | <replaceable class="parameter">delete</replaceable> )
        [ SEARCH { BREADTH | DEPTH } FIRST BY <replaceable>column_name</replaceable> [, ...] SET <replaceable>search_seq_col_name</replaceable> ]
        [ CYCLE <replaceable>column_name</replaceable> [, ...] SET <replaceable>cycle_mark_col_name</replaceable> [ TO <replaceable>cycle_mark_value</replaceable> DEFAULT <replaceable>cycle_mark_default</replaceable> ] USING <replaceable>cycle_path_col_name</replaceable> ]

TABLE [ ONLY ] <replaceable class="parameter">table_name</replaceable> [ * ]
</synopsis>

 </refsynopsisdiv>

 <refsect1>
  <title>Description</title>

  <para>
   <command>SELECT</command> retrieves rows from zero or more tables.
   The general processing of <command>SELECT</command> is as follows:

   <orderedlist>
    <listitem>
     <para>
      All queries in the <literal>WITH</literal> list are computed.
      These effectively serve as temporary tables that can be referenced
      in the <literal>FROM</literal> list.  A <literal>WITH</literal> query
      that is referenced more than once in <literal>FROM</literal> is
      computed only once,
      unless specified otherwise with <literal>NOT MATERIALIZED</literal>.
      (See <xref linkend="sql-with"/> below.)
     </para>
    </listitem>

    <listitem>
     <para>
      All elements in the <literal>FROM</literal> list are computed.
      (Each element in the <literal>FROM</literal> list is a real or
      virtual table.)  If more than one element is specified in the
      <literal>FROM</literal> list, they are cross-joined together.
      (See <xref linkend="sql-from"/> below.)
     </para>
    </listitem>

    <listitem>
     <para>
      If the <literal>WHERE</literal> clause is specified, all rows
      that do not satisfy the condition are eliminated from the
      output.  (See <xref linkend="sql-where"/> below.)
     </para>
    </listitem>

    <listitem>
     <para>
      If the <literal>GROUP BY</literal> clause is specified,
      or if there are aggregate function calls, the
      output is combined into groups of rows that match on one or more
      values, and the results of aggregate functions are computed.
      If the <literal>HAVING</literal> clause is present, it
      eliminates groups that do not satisfy the given condition.  (See
      <xref linkend="sql-groupby"/> and
      <xref linkend="sql-having"/> below.)
      Although query output columns are nominally computed in the next
      step, they can also be referenced (by name or ordinal number)
      in the <literal>GROUP BY</literal> clause.
     </para>
    </listitem>

    <listitem>
     <para>
      The actual output rows are computed using the
      <command>SELECT</command> output expressions for each selected
      row or row group.  (See <xref linkend="sql-select-list"/> below.)
     </para>
    </listitem>

    <listitem>
     <para><literal>SELECT DISTINCT</literal> eliminates duplicate rows from the
      result.  <literal>SELECT DISTINCT ON</literal> eliminates rows that
      match on all the specified expressions.  <literal>SELECT ALL</literal>
      (the default) will return all candidate rows, including
      duplicates.  (See <xref linkend="sql-distinct"/> below.)
     </para>
    </listitem>

    <listitem>
     <para>
      Using the operators <literal>UNION</literal>,
      <literal>INTERSECT</literal>, and <literal>EXCEPT</literal>, the
      output of more than one <command>SELECT</command> statement can
      be combined to form a single result set.  The
      <literal>UNION</literal> operator returns all rows that are in
      one or both of the result sets.  The
      <literal>INTERSECT</literal> operator returns all rows that are
      strictly in both result sets.  The <literal>EXCEPT</literal>
      operator returns the rows that are in the first result set but
      not in the second.  In all three cases, duplicate rows are
      eliminated unless <literal>ALL</literal> is specified.  The noise
      word <literal>DISTINCT</literal> can be added to explicitly specify
      eliminating duplicate rows.  Notice that <literal>DISTINCT</literal> is
      the default behavior here, even though <literal>ALL</literal> is
      the default for <command>SELECT</command> itself.  (See
      <xref linkend="sql-union"/>, <xref linkend="sql-intersect"/>, and
      <xref linkend="sql-except"/> below.)
     </para>
    </listitem>

    <listitem>
     <para>
      If the <literal>ORDER BY</literal> clause is specified, the
      returned rows are sorted in the specified order.  If
      <literal>ORDER BY</literal> is not given, the rows are returned
      in whatever order the system finds fastest to produce.  (See
      <xref linkend="sql-orderby"/> below.)
     </para>
    </listitem>

    <listitem>
     <para>
      If the <literal>LIMIT</literal> (or <literal>FETCH FIRST</literal>) or <literal>OFFSET</literal>
      clause is specified, the <command>SELECT</command> statement
      only returns a subset of the result rows. (See <xref
      linkend="sql-limit"/> below.)
     </para>
    </listitem>

    <listitem>
     <para>
      If <literal>FOR UPDATE</literal>, <literal>FOR NO KEY UPDATE</literal>, <literal>FOR SHARE</literal>
      or <literal>FOR KEY SHARE</literal>
      is specified, the
      <command>SELECT</command> statement locks the selected rows
      against concurrent updates.  (See <xref linkend="sql-for-update-share"/>
      below.)
     </para>
    </listitem>
   </orderedlist>
  </para>

  <para>
   You must have <literal>SELECT</literal> privilege on each column used
   in a <command>SELECT</command> command.  The use of <literal>FOR NO KEY UPDATE</literal>,
   <literal>FOR UPDATE</literal>,
   <literal>FOR SHARE</literal> or <literal>FOR KEY SHARE</literal> requires
   <literal>UPDATE</literal> privilege as well (for at least one column
   of each table so selected).
  </para>
 </refsect1>

 <refsect1>
  <title>Parameters</title>

  <refsect2 id="sql-with" xreflabel="WITH Clause">
   <title><literal>WITH</literal> Clause</title>

   <para>
    The <literal>WITH</literal> clause allows you to specify one or more
    subqueries that can be referenced by name in the primary query.
    The subqueries effectively act as temporary tables or views
    for the duration of the primary query.
    Each subquery can be a <command>SELECT</command>, <command>TABLE</command>, <command>VALUES</command>,
    <command>INSERT</command>, <command>UPDATE</command> or
    <command>DELETE</command> statement.
    When writing a data-modifying statement (<command>INSERT</command>,
    <command>UPDATE</command> or <command>DELETE</command>) in
    <literal>WITH</literal>, it is usual to include a <literal>RETURNING</literal> clause.
    It is the output of <literal>RETURNING</literal>, <emphasis>not</emphasis> the underlying
    table that the statement modifies, that forms the temporary table that is
    read by the primary query.  If <literal>RETURNING</literal> is omitted, the
    statement is still executed, but it produces no output so it cannot be
    referenced as a table by the primary query.
   </para>

   <para>
    A name (without schema qualification) must be specified for each
    <literal>WITH</literal> query.  Optionally, a list of column names
    can be specified; if this is omitted,
    the column names are inferred from the subquery.
   </para>

   <para>
    If <literal>RECURSIVE</literal> is specified, it allows a
    <command>SELECT</command> subquery to reference itself by name.  Such a
    subquery must have the form
<synopsis>
<replaceable class="parameter">non_recursive_term</replaceable> UNION [ ALL | DISTINCT ] <replaceable class="parameter">recursive_term</replaceable>
</synopsis>
    where the recursive self-reference must appear on the right-hand
    side of the <literal>UNION</literal>.  Only one recursive self-reference
    is permitted per query.  Recursive data-modifying statements are not
    supported, but you can use the results of a recursive
    <command>SELECT</command> query in
    a data-modifying statement.  See <xref linkend="queries-with"/> for
    an example.
   </para>

   <para>
    Another effect of <literal>RECURSIVE</literal> is that
    <literal>WITH</literal> queries need not be ordered: a query
    can reference another one that is later in the list.  (However,
    circular references, or mutual recursion, are not implemented.)
    Without <literal>RECURSIVE</literal>, <literal>WITH</literal> queries
    can only reference sibling <literal>WITH</literal> queries
    that are earlier in the <literal>WITH</literal> list.
   </para>

   <para>
    When there are multiple queries in the <literal>WITH</literal>
    clause, <literal>RECURSIVE</literal> should be written only once,
    immediately after <literal>WITH</literal>.  It applies to all queries
    in the <literal>WITH</literal> clause, though it has no effect on
    queries that do not use recursion or forward references.
   </para>

   <para>
    The optional <literal>SEARCH</literal> clause computes a <firstterm>search
    sequence column</firstterm> that can be used for ordering the results of a
    recursive query in either breadth-first or depth-first order.  The
    supplied column name list specifies the row key that is to be used for
    keeping track of visited rows.  A column named
    <replaceable>search_seq_col_name</replaceable> will be added to the result
    column list of the <literal>WITH</literal> query.  This column can be
    ordered by in the outer query to achieve the respective ordering.  See
    <xref linkend="queries-with-search"/> for examples.
   </para>

   <para>
    The optional <literal>CYCLE</literal> clause is used to detect cycles in
    recursive queries.  The supplied column name list specifies the row key
    that is to be used for keeping track of visited rows.  A column named
    <replaceable>cycle_mark_col_name</replaceable> will be added to the result
    column list of the <literal>WITH</literal> query.  This column will be set
    to <replaceable>cycle_mark_value</replaceable> when a cycle has been
    detected, else to <replaceable>cycle_mark_default</replaceable>.
    Furthermore, processing of the recursive union will stop when a cycle has
    been detected.  <replaceable>cycle_mark_value</replaceable> and
    <replaceable>cycle_mark_default</replaceable> must be constants and they
    must be coercible to a common data type, and the data type must have an
    inequality operator.  (The SQL standard requires that they be Boolean
    constants or character strings, but PostgreSQL does not require that.)  By
    default, <literal>TRUE</literal> and <literal>FALSE</literal> (of type
    <type>boolean</type>) are used.  Furthermore, a column
    named <replaceable>cycle_path_col_name</replaceable> will be added to the
    result column list of the <literal>WITH</literal> query.  This column is
    used internally for tracking visited rows.  See <xref
    linkend="queries-with-cycle"/> for examples.
   </para>

   <para>
    Both the <literal>SEARCH</literal> and the <literal>CYCLE</literal> clause
    are only valid for recursive <literal>WITH</literal> queries.  The
    <replaceable>with_query</replaceable> must be a <literal>UNION</literal>
    (or <literal>UNION ALL</literal>) of two <literal>SELECT</literal> (or
    equivalent) commands (no nested <literal>UNION</literal>s).  If both
    clauses are used, the column added by the <literal>SEARCH</literal> clause
    appears before the columns added by the <literal>CYCLE</literal> clause.
   </para>

   <para>
    The primary query and the <literal>WITH</literal> queries are all
    (notionally) executed at the same time.  This implies that the effects of
    a data-modifying statement in <literal>WITH</literal> cannot be seen from
    other parts of the query, other than by reading its <literal>RETURNING</literal>
    output.  If two such data-modifying statements attempt to modify the same
    row, the results are unspecified.
   </para>

   <para>
    A key property of <literal>WITH</literal> queries is that they
    are normally evaluated only once per execution of the primary query,
    even if the primary query refers to them more than once.
    In particular, data-modifying statements are guaranteed to be
    executed once and only once, regardless of whether the primary query
    reads all or any of their output.
   </para>

   <para>
    However, a <literal>WITH</literal> query can be marked
    <literal>NOT MATERIALIZED</literal> to remove this guarantee.  In that
    case, the <literal>WITH</literal> query can be folded into the primary
    query much as though it were a simple sub-<literal>SELECT</literal> in
    the primary query's <literal>FROM</literal> clause.  This results in
    duplicate computations if the primary query refers to
    that <literal>WITH</literal> query more than once; but if each such use
    requires only a few rows of the <literal>WITH</literal> query's total
    output, <literal>NOT MATERIALIZED</literal> can provide a net savings by
    allowing the queries to be optimized jointly.
    <literal>NOT MATERIALIZED</literal> is ignored if it is attached to
    a <literal>WITH</literal> query that is recursive or is not
    side-effect-free (i.e., is not a plain <literal>SELECT</literal>
    containing no volatile functions).
   </para>

   <para>
    By default, a side-effect-free <literal>WITH</literal> query is folded
    into the primary query if it is used exactly once in the primary
    query's <literal>FROM</literal> clause.  This allows joint optimization
    of the two query levels in situations where that should be semantically
    invisible.  However, such folding can be prevented by marking the
    <literal>WITH</literal> query as <literal>MATERIALIZED</literal>.
    That might be useful, for example, if the <literal>WITH</literal> query
    is being used as an optimization fence to prevent the planner from
    choosing a bad plan.
    <productname>PostgreSQL</productname> versions before v12 never did
    such folding, so queries written for older versions might rely on
    <literal>WITH</literal> to act as an optimization fence.
   </para>

   <para>
    See <xref linkend="queries-with"/> for additional information.
   </para>
  </refsect2>

  <refsect2 id="sql-from" xreflabel="FROM Clause">
   <title><literal>FROM</literal> Clause</title>

   <para>
    The <literal>FROM</literal> clause specifies one or more source
    tables for the <command>SELECT</command>.  If multiple sources are
    specified, the result is the Cartesian product (cross join) of all
    the sources.  But usually qualification conditions are added (via
    <literal>WHERE</literal>) to restrict the returned rows to a small subset of the
    Cartesian product.
   </para>

   <para>
    The <literal>FROM</literal> clause can contain the following
    elements:

    <variablelist>
     <varlistentry>
      <term><replaceable class="parameter">table_name</replaceable></term>
      <listitem>
       <para>
        The name (optionally schema-qualified) of an existing table or view.
        If <literal>ONLY</literal> is specified before the table name, only that
        table is scanned.  If <literal>ONLY</literal> is not specified, the table
        and all its descendant tables (if any) are scanned.  Optionally,
        <literal>*</literal> can be specified after the table name to explicitly
        indicate that descendant tables are included.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry>
      <term><replaceable class="parameter">alias</replaceable></term>
      <listitem>
       <para>
        A substitute name for the <literal>FROM</literal> item containing the
        alias.  An alias is used for brevity or to eliminate ambiguity
        for self-joins (where the same table is scanned multiple
        times).  When an alias is provided, it completely hides the
        actual name of the table or function; for example given
        <literal>FROM foo AS f</literal>, the remainder of the
        <command>SELECT</command> must refer to this <literal>FROM</literal>
        item as <literal>f</literal> not <literal>foo</literal>.  If an alias is
        written, a column alias list can also be written to provide
        substitute names for one or more columns of the table.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry>
      <term><literal>TABLESAMPLE <replaceable class="parameter">sampling_method</replaceable> ( <replaceable class="parameter">argument</replaceable> [, ...] ) [ REPEATABLE ( <replaceable class="parameter">seed</replaceable> ) ]</literal></term>
      <listitem>
       <para>
        A <literal>TABLESAMPLE</literal> clause after
        a <replaceable class="parameter">table_name</replaceable> indicates that the
        specified <replaceable class="parameter">sampling_method</replaceable>
        should be used to retrieve a subset of the rows in that table.
        This sampling precedes the application of any other filters such
        as <literal>WHERE</literal> clauses.
        The standard <productname>PostgreSQL</productname> distribution
        includes two sampling methods, <literal>BERNOULLI</literal>
        and <literal>SYSTEM</literal>, and other sampling methods can be
        installed in the database via extensions.
       </para>

       <para>
        The <literal>BERNOULLI</literal> and <literal>SYSTEM</literal> sampling methods
        each accept a single <replaceable class="parameter">argument</replaceable>
        which is the fraction of the table to sample, expressed as a
        percentage between 0 and 100.  This argument can be
        any <type>real</type>-valued expression.  (Other sampling methods might
        accept more or different arguments.)  These two methods each return
        a randomly-chosen sample of the table that will contain
        approximately the specified percentage of the table's rows.
        The <literal>BERNOULLI</literal> method scans the whole table and
        selects or ignores individual rows independently with the specified
        probability.
        The <literal>SYSTEM</literal> method does block-level sampling with
        each block having the specified chance of being selected; all rows
        in each selected block are returned.
        The <literal>SYSTEM</literal> method is significantly faster than
        the <literal>BERNOULLI</literal> method when small sampling
        percentages are specified, but it may return a less-random sample of
        the table as a result of clustering effects.
       </para>

       <para>
        The optional <literal>REPEATABLE</literal> clause specifies
        a <replaceable class="parameter">seed</replaceable> number or expression to use
        for generating random numbers within the sampling method.  The seed
        value can be any non-null floating-point value.  Two queries that
        specify the same seed and <replaceable class="parameter">argument</replaceable>
        values will select the same sample of the table, if the table has
        not been changed meanwhile.  But different seed values will usually
        produce different samples.
        If <literal>REPEATABLE</literal> is not given then a new random
        sample is selected for each query, based upon a system-generated seed.
        Note that some add-on sampling methods do not
        accept <literal>REPEATABLE</literal>, and will always produce new
        samples on each use.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry>
      <term><replaceable class="parameter">select</replaceable></term>
      <listitem>
       <para>
        A sub-<command>SELECT</command> can appear in the
        <literal>FROM</literal> clause.  This acts as though its
        output were created as a temporary table for the duration of
        this single <command>SELECT</command> command.  Note that the
        sub-<command>SELECT</command> must be surrounded by
        parentheses, and an alias can be provided in the same way as for a
        table.  A
        <link linkend="sql-values"><command>VALUES</command></link> command
        can also be used here.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry>
      <term><replaceable class="parameter">with_query_name</replaceable></term>
      <listitem>
       <para>
        A <literal>WITH</literal> query is referenced by writing its name,
        just as though the query's name were a table name.  (In fact,
        the <literal>WITH</literal> query hides any real table of the same name
        for the purposes of the primary query.  If necessary, you can
        refer to a real table of the same name by schema-qualifying
        the table's name.)
        An alias can be provided in the same way as for a table.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry>
      <term><replaceable class="parameter">function_name</replaceable></term>
      <listitem>
       <para>
        Function calls can appear in the <literal>FROM</literal>
        clause.  (This is especially useful for functions that return
        result sets, but any function can be used.)  This acts as
        though the function's output were created as a temporary table for the
        duration of this single <command>SELECT</command> command.
        If the function's result type is composite (including the case of a
        function with multiple <literal>OUT</literal> parameters), each
        attribute becomes a separate column in the implicit table.
       </para>

       <para>
        When the optional <command>WITH ORDINALITY</command> clause is added
        to the function call, an additional column of type <type>bigint</type>
        will be appended to the function's result column(s).  This column
        numbers the rows of the function's result set, starting from 1.
        By default, this column is named <literal>ordinality</literal>.
       </para>

       <para>
        An alias can be provided in the same way as for a table.
        If an alias is written, a column
        alias list can also be written to provide substitute names for
        one or more attributes of the function's composite return
        type, including the ordinality column if present.
       </para>

       <para>
        Multiple function calls can be combined into a
        single <literal>FROM</literal>-clause item by surrounding them
        with <literal>ROWS FROM( ... )</literal>.  The output of such an item is the
        concatenation of the first row from each function, then the second
        row from each function, etc.  If some of the functions produce fewer
        rows than others, null values are substituted for the missing data, so
        that the total number of rows returned is always the same as for the
        function that produced the most rows.
       </para>

      <para>
        If the function has been defined as returning the
        <type>record</type> data type, then an alias or the key word
        <literal>AS</literal> must be present, followed by a column
        definition list in the form <literal>( <replaceable
        class="parameter">column_name</replaceable> <replaceable
        class="parameter">data_type</replaceable> <optional>, ...
        </optional>)</literal>.  The column definition list must match the
        actual number and types of columns returned by the function.
       </para>

       <para>
        When using the <literal>ROWS FROM( ... )</literal> syntax, if one of the
        functions requires a column definition list, it's preferred to put
        the column definition list after the function call inside
        <literal>ROWS FROM( ... )</literal>.  A column definition list can be placed
        after the <literal>ROWS FROM( ... )</literal> construct only if there's just
        a single function and no <literal>WITH ORDINALITY</literal> clause.
       </para>

       <para>
        To use <literal>ORDINALITY</literal> together with a column definition
        list, you must use the <literal>ROWS FROM( ... )</literal> syntax and put the
        column definition list inside <literal>ROWS FROM( ... )</literal>.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry>
      <term><replaceable class="parameter">join_type</replaceable></term>
      <listitem>
       <para>
        One of
        <itemizedlist>
         <listitem>
          <para><literal>[ INNER ] JOIN</literal></para>
         </listitem>
         <listitem>
          <para><literal>LEFT [ OUTER ] JOIN</literal></para>
         </listitem>
         <listitem>
          <para><literal>RIGHT [ OUTER ] JOIN</literal></para>
         </listitem>
         <listitem>
          <para><literal>FULL [ OUTER ] JOIN</literal></para>
         </listitem>
        </itemizedlist>

        For the <literal>INNER</literal> and <literal>OUTER</literal> join types, a
        join condition must be specified, namely exactly one of
        <literal>ON <replaceable
        class="parameter">join_condition</replaceable></literal>,
        <literal>USING (<replaceable
        class="parameter">join_column</replaceable> [, ...])</literal>,
        or <literal>NATURAL</literal>.  See below for the meaning.
       </para>

       <para>
        A <literal>JOIN</literal> clause combines two <literal>FROM</literal>
        items, which for convenience we will refer to as <quote>tables</quote>,
        though in reality they can be any type of <literal>FROM</literal> item.
        Use parentheses if necessary to determine the order of nesting.
        In the absence of parentheses, <literal>JOIN</literal>s nest
        left-to-right.  In any case <literal>JOIN</literal> binds more
        tightly than the commas separating <literal>FROM</literal>-list items.
        All the <literal>JOIN</literal> options are just a notational
        convenience, since they do nothing you couldn't do with plain
        <literal>FROM</literal> and <literal>WHERE</literal>.
       </para>

       <para><literal>LEFT OUTER JOIN</literal> returns all rows in the qualified
        Cartesian product (i.e., all combined rows that pass its join
        condition), plus one copy of each row in the left-hand table
        for which there was no right-hand row that passed the join
        condition.  This left-hand row is extended to the full width
        of the joined table by inserting null values for the
        right-hand columns.  Note that only the <literal>JOIN</literal>
        clause's own condition is considered while deciding which rows
        have matches.  Outer conditions are applied afterwards.
       </para>

       <para>
        Conversely, <literal>RIGHT OUTER JOIN</literal> returns all the
        joined rows, plus one row for each unmatched right-hand row
        (extended with nulls on the left).  This is just a notational
        convenience, since you could convert it to a <literal>LEFT
        OUTER JOIN</literal> by switching the left and right tables.
       </para>

       <para><literal>FULL OUTER JOIN</literal> returns all the joined rows, plus
        one row for each unmatched left-hand row (extended with nulls
        on the right), plus one row for each unmatched right-hand row
        (extended with nulls on the left).
       </para>
      </listitem>
     </varlistentry>

     <varlistentry>
      <term><literal>ON <replaceable class="parameter">join_condition</replaceable></literal></term>
      <listitem>
       <para><replaceable class="parameter">join_condition</replaceable> is
        an expression resulting in a value of type
        <type>boolean</type> (similar to a <literal>WHERE</literal>
        clause) that specifies which rows in a join are considered to
        match.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry>
      <term><literal>USING ( <replaceable class="parameter">join_column</replaceable> [, ...] ) [ AS <replaceable class="parameter">join_using_alias</replaceable> ]</literal></term>
      <listitem>
       <para>
        A clause of the form <literal>USING ( a, b, ... )</literal> is
        shorthand for <literal>ON left_table.a = right_table.a AND
        left_table.b = right_table.b ...</literal>.  Also,
        <literal>USING</literal> implies that only one of each pair of
        equivalent columns will be included in the join output, not
        both.
       </para>

       <para>
        If a <replaceable class="parameter">join_using_alias</replaceable>
        name is specified, it provides a table alias for the join columns.
        Only the join columns listed in the <literal>USING</literal> clause
        are addressable by this name.  Unlike a regular <replaceable
        class="parameter">alias</replaceable>, this does not hide the names of
        the joined tables from the rest of the query.  Also unlike a regular
        <replaceable class="parameter">alias</replaceable>, you cannot write a
        column alias list &mdash; the output names of the join columns are the
        same as they appear in the <literal>USING</literal> list.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry>
      <term><literal>NATURAL</literal></term>
      <listitem>
       <para>
        <literal>NATURAL</literal> is shorthand for a
        <literal>USING</literal> list that mentions all columns in the two
        tables that have matching names.  If there are no common
        column names, <literal>NATURAL</literal> is equivalent
        to <literal>ON TRUE</literal>.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry>
      <term><literal>CROSS JOIN</literal></term>
      <listitem>
       <para>
        <literal>CROSS JOIN</literal> is equivalent to <literal>INNER JOIN ON
        (TRUE)</literal>, that is, no rows are removed by qualification.
        They produce a simple Cartesian product, the same result as you get from
        listing the two tables at the top level of <literal>FROM</literal>,
        but restricted by the join condition (if any).
       </para>
      </listitem>
     </varlistentry>

     <varlistentry>
      <term><literal>LATERAL</literal></term>
      <listitem>
       <para>
        The <literal>LATERAL</literal> key word can precede a
        sub-<command>SELECT</command> <literal>FROM</literal> item.  This allows the
        sub-<command>SELECT</command> to refer to columns of <literal>FROM</literal>
        items that appear before it in the <literal>FROM</literal> list.  (Without
        <literal>LATERAL</literal>, each sub-<command>SELECT</command> is
        evaluated independently and so cannot cross-reference any other
        <literal>FROM</literal> item.)
       </para>

       <para><literal>LATERAL</literal> can also precede a function-call
        <literal>FROM</literal> item, but in this case it is a noise word, because
        the function expression can refer to earlier <literal>FROM</literal> items
        in any case.
       </para>

       <para>
        A <literal>LATERAL</literal> item can appear at top level in the
        <literal>FROM</literal> list, or within a <literal>JOIN</literal> tree.  In the
        latter case it can also refer to any items that are on the left-hand
        side of a <literal>JOIN</literal> that it is on the right-hand side of.
       </para>

       <para>
        When a <literal>FROM</literal> item contains <literal>LATERAL</literal>
        cross-references, evaluation proceeds as follows: for each row of the
        <literal>FROM</literal> item providing the cross-referenced column(s), or
        set of rows of multiple <literal>FROM</literal> items providing the
        columns, the <literal>LATERAL</literal> item is evaluated using that
        row or row set's values of the columns.  The resulting row(s) are
        joined as usual with the rows they were computed from.  This is
        repeated for each row or set of rows from the column source table(s).
       </para>

       <para>
        The column source table(s) must be <literal>INNER</literal> or
        <literal>LEFT</literal> joined to the <literal>LATERAL</literal> item, else
        there would not be a well-defined set of rows from which to compute
        each set of rows for the <literal>LATERAL</literal> item.  Thus,
        although a construct such as <literal><replaceable>X</replaceable> RIGHT JOIN
        LATERAL <replaceable>Y</replaceable></literal> is syntactically valid, it is
        not actually allowed for <replaceable>Y</replaceable> to reference
        <replaceable>X</replaceable>.
       </para>
      </listitem>
     </varlistentry>
    </variablelist>
   </para>
  </refsect2>

  <refsect2 id="sql-where" xreflabel="WHERE Clause">
   <title><literal>WHERE</literal> Clause</title>

   <para>
    The optional <literal>WHERE</literal> clause has the general form
<synopsis>
WHERE <replaceable class="parameter">condition</replaceable>
</synopsis>
    where <replaceable class="parameter">condition</replaceable> is
    any expression that evaluates to a result of type
    <type>boolean</type>.  Any row that does not satisfy this
    condition will be eliminated from the output.  A row satisfies the
    condition if it returns true when the actual row values are
    substituted for any variable references.
   </para>
  </refsect2>

  <refsect2 id="sql-groupby" xreflabel="GROUP BY Clause">
   <title><literal>GROUP BY</literal> Clause</title>

   <para>
    The optional <literal>GROUP BY</literal> clause has the general form
<synopsis>
GROUP BY [ ALL | DISTINCT ] <replaceable class="parameter">grouping_element</replaceable> [, ...]
</synopsis>
   </para>

   <para>
    <literal>GROUP BY</literal> will condense into a single row all
    selected rows that share the same values for the grouped
    expressions.  An <replaceable
    class="parameter">expression</replaceable> used inside a
    <replaceable class="parameter">grouping_element</replaceable>
    can be an input column name, or the name or ordinal number of an
    output column (<command>SELECT</command> list item), or an arbitrary
    expression formed from input-column values.  In case of ambiguity,
    a <literal>GROUP BY</literal> name will be interpreted as an
    input-column name rather than an output column name.
   </para>

   <para>
    If any of <literal>GROUPING SETS</literal>, <literal>ROLLUP</literal> or
    <literal>CUBE</literal> are present as grouping elements, then the
    <literal>GROUP BY</literal> clause as a whole defines some number of
    independent <replaceable>grouping sets</replaceable>.  The effect of this is
    equivalent to constructing a <literal>UNION ALL</literal> between
    subqueries with the individual grouping sets as their
    <literal>GROUP BY</literal> clauses.  The optional <literal>DISTINCT</literal>
    clause removes duplicate sets before processing; it does <emphasis>not</emphasis>
    transform the <literal>UNION ALL</literal> into a <literal>UNION DISTINCT</literal>.
    For further details on the handling
    of grouping sets see <xref linkend="queries-grouping-sets"/>.
   </para>

   <para>
    Aggregate functions, if any are used, are computed across all rows
    making up each group, producing a separate value for each group.
    (If there are aggregate functions but no <literal>GROUP BY</literal>
    clause, the query is treated as having a single group comprising all
    the selected rows.)
    The set of rows fed to each aggregate function can be further filtered by
    attaching a <literal>FILTER</literal> clause to the aggregate function
    call; see <xref linkend="syntax-aggregates"/> for more information.  When
    a <literal>FILTER</literal> clause is present, only those rows matching it
    are included in the input to that aggregate function.
   </para>

   <para>
    When <literal>GROUP BY</literal> is present,
    or any aggregate functions are present, it is not valid for
    the <command>SELECT</command> list expressions to refer to
    ungrouped columns except within aggregate functions or when the
    ungrouped column is functionally dependent on the grouped columns,
    since there would otherwise be more than one possible value to
    return for an ungrouped column.  A functional dependency exists if
    the grouped columns (or a subset thereof) are the primary key of
    the table containing the ungrouped column.
   </para>

   <para>
    Keep in mind that all aggregate functions are evaluated before
    evaluating any <quote>scalar</quote> expressions in the <literal>HAVING</literal>
    clause or <literal>SELECT</literal> list.  This means that, for example,
    a <literal>CASE</literal> expression cannot be used to skip evaluation of
    an aggregate function; see <xref linkend="syntax-express-eval"/>.
   </para>

   <para>
    Currently, <literal>FOR NO KEY UPDATE</literal>, <literal>FOR UPDATE</literal>,
    <literal>FOR SHARE</literal> and <literal>FOR KEY SHARE</literal> cannot be
    specified with <literal>GROUP BY</literal>.
   </para>
  </refsect2>

  <refsect2 id="sql-having" xreflabel="HAVING Clause">
   <title><literal>HAVING</literal> Clause</title>

   <para>
    The optional <literal>HAVING</literal> clause has the general form
<synopsis>
HAVING <replaceable class="parameter">condition</replaceable>
</synopsis>
    where <replaceable class="parameter">condition</replaceable> is
    the same as specified for the <literal>WHERE</literal> clause.
   </para>

   <para>
    <literal>HAVING</literal> eliminates group rows that do not
    satisfy the condition.  <literal>HAVING</literal> is different
    from <literal>WHERE</literal>: <literal>WHERE</literal> filters
    individual rows before the application of <literal>GROUP
    BY</literal>, while <literal>HAVING</literal> filters group rows
    created by <literal>GROUP BY</literal>.  Each column referenced in
    <replaceable class="parameter">condition</replaceable> must
    unambiguously reference a grouping column, unless the reference
    appears within an aggregate function or the ungrouped column is
    functionally dependent on the grouping columns.
   </para>

   <para>
    The presence of <literal>HAVING</literal> turns a query into a grouped
    query even if there is no <literal>GROUP BY</literal> clause.  This is the
    same as what happens when the query contains aggregate functions but
    no <literal>GROUP BY</literal> clause.  All the selected rows are considered to
    form a single group, and the <command>SELECT</command> list and
    <literal>HAVING</literal> clause can only reference table columns from
    within aggregate functions.  Such a query will emit a single row if the
    <literal>HAVING</literal> condition is true, zero rows if it is not true.
   </para>

   <para>
    Currently, <literal>FOR NO KEY UPDATE</literal>, <literal>FOR UPDATE</literal>,
    <literal>FOR SHARE</literal> and <literal>FOR KEY SHARE</literal> cannot be
    specified with <literal>HAVING</literal>.
   </para>
  </refsect2>

  <refsect2 id="sql-window" xreflabel="WINDOW Clause">
   <title><literal>WINDOW</literal> Clause</title>

   <para>
    The optional <literal>WINDOW</literal> clause has the general form
<synopsis>
WINDOW <replaceable class="parameter">window_name</replaceable> AS ( <replaceable class="parameter">window_definition</replaceable> ) [, ...]
</synopsis>
    where <replaceable class="parameter">window_name</replaceable> is
    a name that can be referenced from <literal>OVER</literal> clauses or
    subsequent window definitions, and
    <replaceable class="parameter">window_definition</replaceable> is
<synopsis>
[ <replaceable class="parameter">existing_window_name</replaceable> ]
[ PARTITION BY <replaceable class="parameter">expression</replaceable> [, ...] ]
[ ORDER BY <replaceable class="parameter">expression</replaceable> [ ASC | DESC | USING <replaceable class="parameter">operator</replaceable> ] [ NULLS { FIRST | LAST } ] [, ...] ]
[ <replaceable class="parameter">frame_clause</replaceable> ]
</synopsis>
   </para>

   <para>
    If an <replaceable class="parameter">existing_window_name</replaceable>
    is specified it must refer to an earlier entry in the <literal>WINDOW</literal>
    list; the new window copies its partitioning clause from that entry,
    as well as its ordering clause if any.  In this case the new window cannot
    specify its own <literal>PARTITION BY</literal> clause, and it can specify
    <literal>ORDER BY</literal> only if the copied window does not have one.
    The new window always uses its own frame clause; the copied window
    must not specify a frame clause.
   </para>

   <para>
    The elements of the <literal>PARTITION BY</literal> list are interpreted in
    much the same fashion as elements of a <link
    linkend="sql-groupby"><literal>GROUP BY</literal></link> clause, except that
    they are always simple expressions and never the name or number of an
    output column.
    Another difference is that these expressions can contain aggregate
    function calls, which are not allowed in a regular <literal>GROUP BY</literal>
    clause.  They are allowed here because windowing occurs after grouping
    and aggregation.
   </para>

   <para>
    Similarly, the elements of the <literal>ORDER BY</literal> list are interpreted
    in much the same fashion as elements of a statement-level <link
    linkend="sql-orderby"><literal>ORDER BY</literal></link> clause, except that
    the expressions are always taken as simple expressions and never the name
    or number of an output column.
   </para>

   <para>
    The optional <replaceable class="parameter">frame_clause</replaceable> defines
    the <firstterm>window frame</firstterm> for window functions that depend on the
    frame (not all do).  The window frame is a set of related rows for
    each row of the query (called the <firstterm>current row</firstterm>).
    The <replaceable class="parameter">frame_clause</replaceable> can be one of

<synopsis>
{ RANGE | ROWS | GROUPS } <replaceable>frame_start</replaceable> [ <replaceable>frame_exclusion</replaceable> ]
{ RANGE | ROWS | GROUPS } BETWEEN <replaceable>frame_start</replaceable> AND <replaceable>frame_end</replaceable> [ <replaceable>frame_exclusion</replaceable> ]
</synopsis>

    where <replaceable>frame_start</replaceable>
    and <replaceable>frame_end</replaceable> can be one of

<synopsis>
UNBOUNDED PRECEDING
<replaceable>offset</replaceable> PRECEDING
CURRENT ROW
<replaceable>offset</replaceable> FOLLOWING
UNBOUNDED FOLLOWING
</synopsis>

    and <replaceable>frame_exclusion</replaceable> can be one of

<synopsis>
EXCLUDE CURRENT ROW
EXCLUDE GROUP
EXCLUDE TIES
EXCLUDE NO OTHERS
</synopsis>

    If <replaceable>frame_end</replaceable> is omitted it defaults to <literal>CURRENT
    ROW</literal>.  Restrictions are that
    <replaceable>frame_start</replaceable> cannot be <literal>UNBOUNDED FOLLOWING</literal>,
    <replaceable>frame_end</replaceable> cannot be <literal>UNBOUNDED PRECEDING</literal>,
    and the <replaceable>frame_end</replaceable> choice cannot appear earlier in the
    above list of <replaceable>frame_start</replaceable>
    and <replaceable>frame_end</replaceable> options than
    the <replaceable>frame_start</replaceable> choice does &mdash; for example
    <literal>RANGE BETWEEN CURRENT ROW AND <replaceable>offset</replaceable>
    PRECEDING</literal> is not allowed.
   </para>

   <para>
    The default framing option is <literal>RANGE UNBOUNDED PRECEDING</literal>,
    which is the same as <literal>RANGE BETWEEN UNBOUNDED PRECEDING AND
    CURRENT ROW</literal>; it sets the frame to be all rows from the partition start
    up through the current row's last <firstterm>peer</firstterm> (a row
    that the window's <literal>ORDER BY</literal> clause considers
    equivalent to the current row; all rows are peers if there
    is no <literal>ORDER BY</literal>).
    In general, <literal>UNBOUNDED PRECEDING</literal> means that the frame
    starts with the first row of the partition, and similarly
    <literal>UNBOUNDED FOLLOWING</literal> means that the frame ends with the last
    row of the partition, regardless
    of <literal>RANGE</literal>, <literal>ROWS</literal>
    or <literal>GROUPS</literal> mode.
    In <literal>ROWS</literal> mode, <literal>CURRENT ROW</literal> means
    that the frame starts or ends with the current row; but
    in <literal>RANGE</literal> or <literal>GROUPS</literal> mode it means
    that the frame starts or ends with the current row's first or last peer
    in the <literal>ORDER BY</literal> ordering.
    The <replaceable>offset</replaceable> <literal>PRECEDING</literal> and
    <replaceable>offset</replaceable> <literal>FOLLOWING</literal> options
    vary in meaning depending on the frame mode.
    In <literal>ROWS</literal> mode, the <replaceable>offset</replaceable>
    is an integer indicating that the frame starts or ends that many rows
    before or after the current row.
    In <literal>GROUPS</literal> mode, the <replaceable>offset</replaceable>
    is an integer indicating that the frame starts or ends that many peer
    groups before or after the current row's peer group, where
    a <firstterm>peer group</firstterm> is a group of rows that are
    equivalent according to the window's <literal>ORDER BY</literal> clause.
    In <literal>RANGE</literal> mode, use of
    an <replaceable>offset</replaceable> option requires that there be
    exactly one <literal>ORDER BY</literal> column in the window definition.
    Then the frame contains those rows whose ordering column value is no
    more than <replaceable>offset</replaceable> less than
    (for <literal>PRECEDING</literal>) or more than
    (for <literal>FOLLOWING</literal>) the current row's ordering column
    value.  In these cases the data type of
    the <replaceable>offset</replaceable> expression depends on the data
    type of the ordering column.  For numeric ordering columns it is
    typically of the same type as the ordering column, but for datetime
    ordering columns it is an <type>interval</type>.
    In all these cases, the value of the <replaceable>offset</replaceable>
    must be non-null and non-negative.  Also, while
    the <replaceable>offset</replaceable> does not have to be a simple
    constant, it cannot contain variables, aggregate functions, or window
    functions.
   </para>

   <para>
    The <replaceable>frame_exclusion</replaceable> option allows rows around
    the current row to be excluded from the frame, even if they would be
    included according to the frame start and frame end options.
    <literal>EXCLUDE CURRENT ROW</literal> excludes the current row from the
    frame.
    <literal>EXCLUDE GROUP</literal> excludes the current row and its
    ordering peers from the frame.
    <literal>EXCLUDE TIES</literal> excludes any peers of the current
    row from the frame, but not the current row itself.
    <literal>EXCLUDE NO OTHERS</literal> simply specifies explicitly the
    default behavior of not excluding the current row or its peers.
   </para>

   <para>
    Beware that the <literal>ROWS</literal> mode can produce unpredictable
    results if the <literal>ORDER BY</literal> ordering does not order the rows
    uniquely.  The <literal>RANGE</literal> and <literal>GROUPS</literal>
    modes are designed to ensure that rows that are peers in
    the <literal>ORDER BY</literal> ordering are treated alike: all rows of
    a given peer group will be in the frame or excluded from it.
   </para>

   <para>
    The purpose of a <literal>WINDOW</literal> clause is to specify the
    behavior of <firstterm>window functions</firstterm> appearing in the query's
    <link linkend="sql-select-list"><command>SELECT</command> list</link> or
    <link linkend="sql-orderby"><literal>ORDER BY</literal></link> clause.
    These functions
    can reference the <literal>WINDOW</literal> clause entries by name
    in their <literal>OVER</literal> clauses.  A <literal>WINDOW</literal> clause
    entry does not have to be referenced anywhere, however; if it is not
    used in the query it is simply ignored.  It is possible to use window
    functions without any <literal>WINDOW</literal> clause at all, since
    a window function call can specify its window definition directly in
    its <literal>OVER</literal> clause.  However, the <literal>WINDOW</literal>
    clause saves typing when the same window definition is needed for more
    than one window function.
   </para>

   <para>
    Currently, <literal>FOR NO KEY UPDATE</literal>, <literal>FOR UPDATE</literal>,
    <literal>FOR SHARE</literal> and <literal>FOR KEY SHARE</literal> cannot be
    specified with <literal>WINDOW</literal>.
   </para>

   <para>
    Window functions are described in detail in
    <xref linkend="tutorial-window"/>,
    <xref linkend="syntax-window-functions"/>, and
    <xref linkend="queries-window"/>.
   </para>
  </refsect2>

  <refsect2 id="sql-select-list" xreflabel="SELECT List">
   <title><command>SELECT</command> List</title>

   <para>
    The <command>SELECT</command> list (between the key words
    <literal>SELECT</literal> and <literal>FROM</literal>) specifies expressions
    that form the output rows of the <command>SELECT</command>
    statement.  The expressions can (and usually do) refer to columns
    computed in the <literal>FROM</literal> clause.
   </para>

   <para>
    Just as in a table, every output column of a <command>SELECT</command>
    has a name.  In a simple <command>SELECT</command> this name is just
    used to label the column for display, but when the <command>SELECT</command>
    is a sub-query of a larger query, the name is seen by the larger query
    as the column name of the virtual table produced by the sub-query.
    To specify the name to use for an output column, write
    <literal>AS</literal> <replaceable class="parameter">output_name</replaceable>
    after the column's expression.  (You can omit <literal>AS</literal>,
    but only if the desired output name does not match any
    <productname>PostgreSQL</productname> keyword (see <xref
    linkend="sql-keywords-appendix"/>).  For protection against possible
    future keyword additions, it is recommended that you always either
    write <literal>AS</literal> or double-quote the output name.)
    If you do not specify a column name, a name is chosen automatically
    by <productname>PostgreSQL</productname>.  If the column's expression
    is a simple column reference then the chosen name is the same as that
    column's name.  In more complex cases a function or type name may be
    used, or the system may fall back on a generated name such as
    <literal>?column?</literal>.
   </para>

   <para>
    An output column's name can be used to refer to the column's value in
    <literal>ORDER BY</literal> and <literal>GROUP BY</literal> clauses, but not in the
    <literal>WHERE</literal> or <literal>HAVING</literal> clauses; there you must write
    out the expression instead.
   </para>

   <para>
    Instead of an expression, <literal>*</literal> can be written in
    the output list as a shorthand for all the columns of the selected
    rows.  Also, you can write <literal><replaceable
    class="parameter">table_name</replaceable>.*</literal> as a
    shorthand for the columns coming from just that table.  In these
    cases it is not possible to specify new names with <literal>AS</literal>;
    the output column names will be the same as the table columns' names.
   </para>

   <para>
    According to the SQL standard, the expressions in the output list should
    be computed before applying <literal>DISTINCT</literal>, <literal>ORDER
    BY</literal>, or <literal>LIMIT</literal>.  This is obviously necessary
    when using <literal>DISTINCT</literal>, since otherwise it's not clear
    what values are being made distinct.  However, in many cases it is
    convenient if output expressions are computed after <literal>ORDER
    BY</literal> and <literal>LIMIT</literal>; particularly if the output list
    contains any volatile or expensive functions.  With that behavior, the
    order of function evaluations is more intuitive and there will not be
    evaluations corresponding to rows that never appear in the output.
    <productname>PostgreSQL</productname> will effectively evaluate output expressions
    after sorting and limiting, so long as those expressions are not
    referenced in <literal>DISTINCT</literal>, <literal>ORDER BY</literal>
    or <literal>GROUP BY</literal>.  (As a counterexample, <literal>SELECT
    f(x) FROM tab ORDER BY 1</literal> clearly must evaluate <function>f(x)</function>
    before sorting.)  Output expressions that contain set-returning functions
    are effectively evaluated after sorting and before limiting, so
    that <literal>LIMIT</literal> will act to cut off the output from a
    set-returning function.
   </para>

   <note>
    <para>
     <productname>PostgreSQL</productname> versions before 9.6 did not provide any
     guarantees about the timing of evaluation of output expressions versus
     sorting and limiting; it depended on the form of the chosen query plan.
    </para>
   </note>
  </refsect2>

  <refsect2 id="sql-distinct" xreflabel="DISTINCT Clause">
   <title><literal>DISTINCT</literal> Clause</title>

   <para>
    If <literal>SELECT DISTINCT</literal> is specified, all duplicate rows are
    removed from the result set (one row is kept from each group of
    duplicates).  <literal>SELECT ALL</literal> specifies the opposite: all rows are
    kept; that is the default.
   </para>

   <para>
    <literal>SELECT DISTINCT ON ( <replaceable
    class="parameter">expression</replaceable> [, ...] )</literal>
    keeps only the first row of each set of rows where the given
    expressions evaluate to equal.  The <literal>DISTINCT ON</literal>
    expressions are interpreted using the same rules as for
    <literal>ORDER BY</literal> (see above).  Note that the <quote>first
    row</quote> of each set is unpredictable unless <literal>ORDER
    BY</literal> is used to ensure that the desired row appears first.  For
    example:
<programlisting>
SELECT DISTINCT ON (location) location, time, report
    FROM weather_reports
    ORDER BY location, time DESC;
</programlisting>
    retrieves the most recent weather report for each location.  But
    if we had not used <literal>ORDER BY</literal> to force descending order
    of time values for each location, we'd have gotten a report from
    an unpredictable time for each location.
   </para>

   <para>
    The <literal>DISTINCT ON</literal> expression(s) must match the leftmost
    <literal>ORDER BY</literal> expression(s).  The <literal>ORDER BY</literal> clause
    will normally contain additional expression(s) that determine the
    desired precedence of rows within each <literal>DISTINCT ON</literal> group.
   </para>

   <para>
    Currently, <literal>FOR NO KEY UPDATE</literal>, <literal>FOR UPDATE</literal>,
    <literal>FOR SHARE</literal> and <literal>FOR KEY SHARE</literal> cannot be
    specified with <literal>DISTINCT</literal>.
   </para>
  </refsect2>

  <refsect2 id="sql-union" xreflabel="UNION Clause">
   <title><literal>UNION</literal> Clause</title>

   <para>
    The <literal>UNION</literal> clause has this general form:
<synopsis>
<replaceable class="parameter">select_statement</replaceable> UNION [ ALL | DISTINCT ] <replaceable class="parameter">select_statement</replaceable>
</synopsis><replaceable class="parameter">select_statement</replaceable> is
    any <command>SELECT</command> statement without an <literal>ORDER
    BY</literal>, <literal>LIMIT</literal>, <literal>FOR NO KEY UPDATE</literal>, <literal>FOR UPDATE</literal>,
    <literal>FOR SHARE</literal>, or <literal>FOR KEY SHARE</literal> clause.
    (<literal>ORDER BY</literal> and <literal>LIMIT</literal> can be attached to a
    subexpression if it is enclosed in parentheses.  Without
    parentheses, these clauses will be taken to apply to the result of
    the <literal>UNION</literal>, not to its right-hand input
    expression.)
   </para>

   <para>
    The <literal>UNION</literal> operator computes the set union of
    the rows returned by the involved <command>SELECT</command>
    statements.  A row is in the set union of two result sets if it
    appears in at least one of the result sets.  The two
    <command>SELECT</command> statements that represent the direct
    operands of the <literal>UNION</literal> must produce the same
    number of columns, and corresponding columns must be of compatible
    data types.
   </para>

   <para>
    The result of <literal>UNION</literal> does not contain any duplicate
    rows unless the <literal>ALL</literal> option is specified.
    <literal>ALL</literal> prevents elimination of duplicates.  (Therefore,
    <literal>UNION ALL</literal> is usually significantly quicker than
    <literal>UNION</literal>; use <literal>ALL</literal> when you can.)
    <literal>DISTINCT</literal> can be written to explicitly specify the
    default behavior of eliminating duplicate rows.
   </para>

   <para>
    Multiple <literal>UNION</literal> operators in the same
    <command>SELECT</command> statement are evaluated left to right,
    unless otherwise indicated by parentheses.
   </para>

   <para>
    Currently, <literal>FOR NO KEY UPDATE</literal>, <literal>FOR UPDATE</literal>, <literal>FOR SHARE</literal> and
    <literal>FOR KEY SHARE</literal> cannot be
    specified either for a <literal>UNION</literal> result or for any input of a
    <literal>UNION</literal>.
   </para>
  </refsect2>

  <refsect2 id="sql-intersect" xreflabel="INTERSECT Clause">
   <title><literal>INTERSECT</literal> Clause</title>

   <para>
    The <literal>INTERSECT</literal> clause has this general form:
<synopsis>
<replaceable class="parameter">select_statement</replaceable> INTERSECT [ ALL | DISTINCT ] <replaceable class="parameter">select_statement</replaceable>
</synopsis><replaceable class="parameter">select_statement</replaceable> is
    any <command>SELECT</command> statement without an <literal>ORDER
    BY</literal>, <literal>LIMIT</literal>, <literal>FOR NO KEY UPDATE</literal>, <literal>FOR UPDATE</literal>,
    <literal>FOR SHARE</literal>, or <literal>FOR KEY SHARE</literal> clause.
   </para>

   <para>
    The <literal>INTERSECT</literal> operator computes the set
    intersection of the rows returned by the involved
    <command>SELECT</command> statements.  A row is in the
    intersection of two result sets if it appears in both result sets.
   </para>

   <para>
    The result of <literal>INTERSECT</literal> does not contain any
    duplicate rows unless the <literal>ALL</literal> option is specified.
    With <literal>ALL</literal>, a row that has <replaceable>m</replaceable> duplicates in the
    left table and <replaceable>n</replaceable> duplicates in the right table will appear
    min(<replaceable>m</replaceable>,<replaceable>n</replaceable>) times in the result set.
    <literal>DISTINCT</literal> can be written to explicitly specify the
    default behavior of eliminating duplicate rows.
   </para>

   <para>
    Multiple <literal>INTERSECT</literal> operators in the same
    <command>SELECT</command> statement are evaluated left to right,
    unless parentheses dictate otherwise.
    <literal>INTERSECT</literal> binds more tightly than
    <literal>UNION</literal>.  That is, <literal>A UNION B INTERSECT
    C</literal> will be read as <literal>A UNION (B INTERSECT
    C)</literal>.
   </para>

   <para>
    Currently, <literal>FOR NO KEY UPDATE</literal>, <literal>FOR UPDATE</literal>, <literal>FOR SHARE</literal> and
    <literal>FOR KEY SHARE</literal> cannot be
    specified either for an <literal>INTERSECT</literal> result or for any input of
    an <literal>INTERSECT</literal>.
   </para>
  </refsect2>

  <refsect2 id="sql-except" xreflabel="EXCEPT Clause">
   <title><literal>EXCEPT</literal> Clause</title>

   <para>
    The <literal>EXCEPT</literal> clause has this general form:
<synopsis>
<replaceable class="parameter">select_statement</replaceable> EXCEPT [ ALL | DISTINCT ] <replaceable class="parameter">select_statement</replaceable>
</synopsis><replaceable class="parameter">select_statement</replaceable> is
    any <command>SELECT</command> statement without an <literal>ORDER
    BY</literal>, <literal>LIMIT</literal>, <literal>FOR NO KEY UPDATE</literal>, <literal>FOR UPDATE</literal>,
    <literal>FOR SHARE</literal>, or <literal>FOR KEY SHARE</literal> clause.
   </para>

   <para>
    The <literal>EXCEPT</literal> operator computes the set of rows
    that are in the result of the left <command>SELECT</command>
    statement but not in the result of the right one.
   </para>

   <para>
    The result of <literal>EXCEPT</literal> does not contain any
    duplicate rows unless the <literal>ALL</literal> option is specified.
    With <literal>ALL</literal>, a row that has <replaceable>m</replaceable> duplicates in the
    left table and <replaceable>n</replaceable> duplicates in the right table will appear
    max(<replaceable>m</replaceable>-<replaceable>n</replaceable>,0) times in the result set.
    <literal>DISTINCT</literal> can be written to explicitly specify the
    default behavior of eliminating duplicate rows.
   </para>

   <para>
    Multiple <literal>EXCEPT</literal> operators in the same
    <command>SELECT</command> statement are evaluated left to right,
    unless parentheses dictate otherwise.  <literal>EXCEPT</literal> binds at
    the same level as <literal>UNION</literal>.
   </para>

   <para>
    Currently, <literal>FOR NO KEY UPDATE</literal>, <literal>FOR UPDATE</literal>, <literal>FOR SHARE</literal> and
    <literal>FOR KEY SHARE</literal> cannot be
    specified either for an <literal>EXCEPT</literal> result or for any input of
    an <literal>EXCEPT</literal>.
   </para>
  </refsect2>

  <refsect2 id="sql-orderby" xreflabel="ORDER BY Clause">
   <title><literal>ORDER BY</literal> Clause</title>

   <para>
    The optional <literal>ORDER BY</literal> clause has this general form:
<synopsis>
ORDER BY <replaceable class="parameter">expression</replaceable> [ ASC | DESC | USING <replaceable class="parameter">operator</replaceable> ] [ NULLS { FIRST | LAST } ] [, ...]
</synopsis>
    The <literal>ORDER BY</literal> clause causes the result rows to
    be sorted according to the specified expression(s).  If two rows are
    equal according to the leftmost expression, they are compared
    according to the next expression and so on.  If they are equal
    according to all specified expressions, they are returned in
    an implementation-dependent order.
   </para>

   <para>
    Each <replaceable class="parameter">expression</replaceable> can be the
    name or ordinal number of an output column
    (<command>SELECT</command> list item), or it can be an arbitrary
    expression formed from input-column values.
   </para>

   <para>
    The ordinal number refers to the ordinal (left-to-right) position
    of the output column. This feature makes it possible to define an
    ordering on the basis of a column that does not have a unique
    name.  This is never absolutely necessary because it is always
    possible to assign a name to an output column using the
    <literal>AS</literal> clause.
   </para>

   <para>
    It is also possible to use arbitrary expressions in the
    <literal>ORDER BY</literal> clause, including columns that do not
    appear in the <command>SELECT</command> output list.  Thus the
    following statement is valid:
<programlisting>
SELECT name FROM distributors ORDER BY code;
</programlisting>
    A limitation of this feature is that an <literal>ORDER BY</literal>
    clause applying to the result of a <literal>UNION</literal>,
    <literal>INTERSECT</literal>, or <literal>EXCEPT</literal> clause can only
    specify an output column name or number, not an expression.
   </para>

   <para>
    If an <literal>ORDER BY</literal> expression is a simple name that
    matches both an output column name and an input column name,
    <literal>ORDER BY</literal> will interpret it as the output column name.
    This is the opposite of the choice that <literal>GROUP BY</literal> will
    make in the same situation.  This inconsistency is made to be
    compatible with the SQL standard.
   </para>

   <para>
    Optionally one can add the key word <literal>ASC</literal> (ascending) or
    <literal>DESC</literal> (descending) after any expression in the
    <literal>ORDER BY</literal> clause.  If not specified, <literal>ASC</literal> is
    assumed by default.  Alternatively, a specific ordering operator
    name can be specified in the <literal>USING</literal> clause.
    An ordering operator must be a less-than or greater-than
    member of some B-tree operator family.
    <literal>ASC</literal> is usually equivalent to <literal>USING &lt;</literal> and
    <literal>DESC</literal> is usually equivalent to <literal>USING &gt;</literal>.
    (But the creator of a user-defined data type can define exactly what the
    default sort ordering is, and it might correspond to operators with other
    names.)
   </para>

   <para>
    If <literal>NULLS LAST</literal> is specified, null values sort after all
    non-null values; if <literal>NULLS FIRST</literal> is specified, null values
    sort before all non-null values.  If neither is specified, the default
    behavior is <literal>NULLS LAST</literal> when <literal>ASC</literal> is specified
    or implied, and <literal>NULLS FIRST</literal> when <literal>DESC</literal> is specified
    (thus, the default is to act as though nulls are larger than non-nulls).
    When <literal>USING</literal> is specified, the default nulls ordering depends
    on whether the operator is a less-than or greater-than operator.
   </para>

   <para>
    Note that ordering options apply only to the expression they follow;
    for example <literal>ORDER BY x, y DESC</literal> does not mean
    the same thing as <literal>ORDER BY x DESC, y DESC</literal>.
   </para>

   <para>
    Character-string data is sorted according to the collation that applies
    to the column being sorted.  That can be overridden at need by including
    a <literal>COLLATE</literal> clause in the
    <replaceable class="parameter">expression</replaceable>, for example
    <literal>ORDER BY mycolumn COLLATE "en_US"</literal>.
    For more information see <xref linkend="sql-syntax-collate-exprs"/> and
    <xref linkend="collation"/>.
   </para>
  </refsect2>

  <refsect2 id="sql-limit" xreflabel="LIMIT Clause">
   <title><literal>LIMIT</literal> Clause</title>

   <para>
    The <literal>LIMIT</literal> clause consists of two independent
    sub-clauses:
<synopsis>
LIMIT { <replaceable class="parameter">count</replaceable> | ALL }
OFFSET <replaceable class="parameter">start</replaceable>
</synopsis>
    The parameter <replaceable class="parameter">count</replaceable> specifies the
    maximum number of rows to return, while <replaceable
    class="parameter">start</replaceable> specifies the number of rows
    to skip before starting to return rows.  When both are specified,
    <replaceable class="parameter">start</replaceable> rows are skipped
    before starting to count the <replaceable
    class="parameter">count</replaceable> rows to be returned.
   </para>

   <para>
    If the <replaceable class="parameter">count</replaceable> expression
    evaluates to NULL, it is treated as <literal>LIMIT ALL</literal>, i.e., no
    limit.  If <replaceable class="parameter">start</replaceable> evaluates
    to NULL, it is treated the same as <literal>OFFSET 0</literal>.
   </para>

   <para>
    SQL:2008 introduced a different syntax to achieve the same result,
    which <productname>PostgreSQL</productname> also supports.  It is:
<synopsis>
OFFSET <replaceable class="parameter">start</replaceable> { ROW | ROWS }
FETCH { FIRST | NEXT } [ <replaceable class="parameter">count</replaceable> ] { ROW | ROWS } { ONLY | WITH TIES }
</synopsis>
    In this syntax, the <replaceable class="parameter">start</replaceable>
    or <replaceable class="parameter">count</replaceable> value is required by
    the standard to be a literal constant, a parameter, or a variable name;
    as a <productname>PostgreSQL</productname> extension, other expressions
    are allowed, but will generally need to be enclosed in parentheses to avoid
    ambiguity.
    If <replaceable class="parameter">count</replaceable> is
    omitted in a <literal>FETCH</literal> clause, it defaults to 1.
    The <literal>WITH TIES</literal> option is used to return any additional
    rows that tie for the last place in the result set according to
    the <literal>ORDER BY</literal> clause; <literal>ORDER BY</literal>
    is mandatory in this case, and <literal>SKIP LOCKED</literal> is
    not allowed.
    <literal>ROW</literal> and <literal>ROWS</literal> as well as
    <literal>FIRST</literal> and <literal>NEXT</literal> are noise
    words that don't influence the effects of these clauses.
    According to the standard, the <literal>OFFSET</literal> clause must come
    before the <literal>FETCH</literal> clause if both are present; but
    <productname>PostgreSQL</productname> is laxer and allows either order.
   </para>

   <para>
    When using <literal>LIMIT</literal>, it is a good idea to use an
    <literal>ORDER BY</literal> clause that constrains the result rows into a
    unique order.  Otherwise you will get an unpredictable subset of
    the query's rows &mdash; you might be asking for the tenth through
    twentieth rows, but tenth through twentieth in what ordering?  You
    don't know what ordering unless you specify <literal>ORDER BY</literal>.
   </para>

   <para>
    The query planner takes <literal>LIMIT</literal> into account when
    generating a query plan, so you are very likely to get different
    plans (yielding different row orders) depending on what you use
    for <literal>LIMIT</literal> and <literal>OFFSET</literal>.  Thus, using
    different <literal>LIMIT</literal>/<literal>OFFSET</literal> values to select
    different subsets of a query result <emphasis>will give
    inconsistent results</emphasis> unless you enforce a predictable
    result ordering with <literal>ORDER BY</literal>.  This is not a bug; it
    is an inherent consequence of the fact that SQL does not promise
    to deliver the results of a query in any particular order unless
    <literal>ORDER BY</literal> is used to constrain the order.
   </para>

   <para>
    It is even possible for repeated executions of the same <literal>LIMIT</literal>
    query to return different subsets of the rows of a table, if there
    is not an <literal>ORDER BY</literal> to enforce selection of a deterministic
    subset.  Again, this is not a bug; determinism of the results is
    simply not guaranteed in such a case.
   </para>
  </refsect2>

  <refsect2 id="sql-for-update-share" xreflabel="The Locking Clause">
   <title>The Locking Clause</title>

   <para>
    <literal>FOR UPDATE</literal>, <literal>FOR NO KEY UPDATE</literal>, <literal>FOR SHARE</literal>
    and <literal>FOR KEY SHARE</literal>
    are <firstterm>locking clauses</firstterm>; they affect how <literal>SELECT</literal>
    locks rows as they are obtained from the table.
   </para>

   <para>
    The locking clause has the general form

<synopsis>
FOR <replaceable>lock_strength</replaceable> [ OF <replaceable class="parameter">table_name</replaceable> [, ...] ] [ NOWAIT | SKIP LOCKED ]
</synopsis>

    where <replaceable>lock_strength</replaceable> can be one of

<synopsis>
UPDATE
NO KEY UPDATE
SHARE
KEY SHARE
</synopsis>
   </para>

   <para>
    For more information on each row-level lock mode, refer to
    <xref linkend="locking-rows"/>.
   </para>

   <para>
    To prevent the operation from waiting for other transactions to commit,
    use either the <literal>NOWAIT</literal> or <literal>SKIP LOCKED</literal>
    option.  With <literal>NOWAIT</literal>, the statement reports an error, rather
    than waiting, if a selected row cannot be locked immediately.
    With <literal>SKIP LOCKED</literal>, any selected rows that cannot be
    immediately locked are skipped.  Skipping locked rows provides an
    inconsistent view of the data, so this is not suitable for general purpose
    work, but can be used to avoid lock contention with multiple consumers
    accessing a queue-like table.
    Note that <literal>NOWAIT</literal> and <literal>SKIP LOCKED</literal> apply only
    to the row-level lock(s) &mdash; the required <literal>ROW SHARE</literal>
    table-level lock is still taken in the ordinary way (see
    <xref linkend="mvcc"/>).  You can use
    <link linkend="sql-lock"><command>LOCK</command></link>
    with the <literal>NOWAIT</literal> option first,
    if you need to acquire the table-level lock without waiting.
   </para>

   <para>
    If specific tables are named in a locking clause,
    then only rows coming from those tables are locked; any other
    tables used in the <command>SELECT</command> are simply read as
    usual.  A locking
    clause without a table list affects all tables used in the statement.
    If a locking clause is
    applied to a view or sub-query, it affects all tables used in
    the view or sub-query.
    However, these clauses
    do not apply to <literal>WITH</literal> queries referenced by the primary query.
    If you want row locking to occur within a <literal>WITH</literal> query, specify
    a locking clause within the <literal>WITH</literal> query.
   </para>

   <para>
    Multiple locking
    clauses can be written if it is necessary to specify different locking
    behavior for different tables.  If the same table is mentioned (or
    implicitly affected) by more than one locking clause,
    then it is processed as if it was only specified by the strongest one.
    Similarly, a table is processed
    as <literal>NOWAIT</literal> if that is specified in any of the clauses
    affecting it.  Otherwise, it is processed
    as <literal>SKIP LOCKED</literal> if that is specified in any of the
    clauses affecting it.
   </para>

   <para>
    The locking clauses cannot be
    used in contexts where returned rows cannot be clearly identified with
    individual table rows; for example they cannot be used with aggregation.
   </para>

   <para>
    When a locking clause
    appears at the top level of a <command>SELECT</command> query, the rows that
    are locked are exactly those that are returned by the query; in the
    case of a join query, the rows locked are those that contribute to
    returned join rows.  In addition, rows that satisfied the query
    conditions as of the query snapshot will be locked, although they
    will not be returned if they were updated after the snapshot
    and no longer satisfy the query conditions.  If a
    <literal>LIMIT</literal> is used, locking stops
    once enough rows have been returned to satisfy the limit (but note that
    rows skipped over by <literal>OFFSET</literal> will get locked).  Similarly,
    if a locking clause
    is used in a cursor's query, only rows actually fetched or stepped past
    by the cursor will be locked.
   </para>

   <para>
    When a locking clause
    appears in a sub-<command>SELECT</command>, the rows locked are those
    returned to the outer query by the sub-query.  This might involve
    fewer rows than inspection of the sub-query alone would suggest,
    since conditions from the outer query might be used to optimize
    execution of the sub-query.  For example,
<programlisting>
SELECT * FROM (SELECT * FROM mytable FOR UPDATE) ss WHERE col1 = 5;
</programlisting>
    will lock only rows having <literal>col1 = 5</literal>, even though that
    condition is not textually within the sub-query.
   </para>

  <para>
   Previous releases failed to preserve a lock which is upgraded by a later
   savepoint.  For example, this code:
<programlisting>
BEGIN;
SELECT * FROM mytable WHERE key = 1 FOR UPDATE;
SAVEPOINT s;
UPDATE mytable SET ... WHERE key = 1;
ROLLBACK TO s;
</programlisting>
   would fail to preserve the <literal>FOR UPDATE</literal> lock after the
   <command>ROLLBACK TO</command>.  This has been fixed in release 9.3.
  </para>

  <caution>
   <para>
    It is possible for a <command>SELECT</command> command running at the <literal>READ
    COMMITTED</literal> transaction isolation level and using <literal>ORDER
    BY</literal> and a locking clause to return rows out of
    order.  This is because <literal>ORDER BY</literal> is applied first.
    The command sorts the result, but might then block trying to obtain a lock
    on one or more of the rows.  Once the <literal>SELECT</literal> unblocks, some
    of the ordering column values might have been modified, leading to those
    rows appearing to be out of order (though they are in order in terms
    of the original column values).  This can be worked around at need by
    placing the <literal>FOR UPDATE/SHARE</literal> clause in a sub-query,
    for example
<programlisting>
SELECT * FROM (SELECT * FROM mytable FOR UPDATE) ss ORDER BY column1;
</programlisting>
    Note that this will result in locking all rows of <structname>mytable</structname>,
    whereas <literal>FOR UPDATE</literal> at the top level would lock only the
    actually returned rows.  This can make for a significant performance
    difference, particularly if the <literal>ORDER BY</literal> is combined with
    <literal>LIMIT</literal> or other restrictions.  So this technique is recommended
    only if concurrent updates of the ordering columns are expected and a
    strictly sorted result is required.
   </para>

   <para>
    At the <literal>REPEATABLE READ</literal> or <literal>SERIALIZABLE</literal>
    transaction isolation level this would cause a serialization failure (with
    an <literal>SQLSTATE</literal> of <literal>'40001'</literal>), so there is
    no possibility of receiving rows out of order under these isolation levels.
   </para>
  </caution>
  </refsect2>

  <refsect2 id="sql-table">
   <title><literal>TABLE</literal> Command</title>

   <para>
    The command
<programlisting>
TABLE <replaceable class="parameter">name</replaceable>
</programlisting>
    is equivalent to
<programlisting>
SELECT * FROM <replaceable class="parameter">name</replaceable>
</programlisting>
    It can be used as a top-level command or as a space-saving syntax
    variant in parts of complex queries. Only the <literal>WITH</literal>,
    <literal>UNION</literal>, <literal>INTERSECT</literal>, <literal>EXCEPT</literal>,
    <literal>ORDER BY</literal>, <literal>LIMIT</literal>, <literal>OFFSET</literal>,
    <literal>FETCH</literal> and <literal>FOR</literal> locking clauses can be used
    with <command>TABLE</command>; the <literal>WHERE</literal> clause and any form of
    aggregation cannot
    be used.
   </para>
  </refsect2>
 </refsect1>

 <refsect1>
  <title>Examples</title>

  <para>
   To join the table <literal>films</literal> with the table
   <literal>distributors</literal>:

<programlisting>
SELECT f.title, f.did, d.name, f.date_prod, f.kind
    FROM distributors d JOIN films f USING (did);

       title       | did |     name     | date_prod  |   kind
-------------------+-----+--------------+------------+----------
 The Third Man     | 101 | British Lion | 1949-12-23 | Drama
 The African Queen | 101 | British Lion | 1951-08-11 | Romantic
 ...
</programlisting>
  </para>

  <para>
   To sum the column <literal>len</literal> of all films and group
   the results by <literal>kind</literal>:

<programlisting>
SELECT kind, sum(len) AS total FROM films GROUP BY kind;

   kind   | total
----------+-------
 Action   | 07:34
 Comedy   | 02:58
 Drama    | 14:28
 Musical  | 06:42
 Romantic | 04:38
</programlisting>
  </para>

  <para>
   To sum the column <literal>len</literal> of all films, group
   the results by <literal>kind</literal> and show those group totals
   that are less than 5 hours:

<programlisting>
SELECT kind, sum(len) AS total
    FROM films
    GROUP BY kind
    HAVING sum(len) &lt; interval '5 hours';

   kind   | total
----------+-------
 Comedy   | 02:58
 Romantic | 04:38
</programlisting>
  </para>

  <para>
   The following two examples are identical ways of sorting the individual
   results according to the contents of the second column
   (<literal>name</literal>):

<programlisting>
SELECT * FROM distributors ORDER BY name;
SELECT * FROM distributors ORDER BY 2;

 did |       name
-----+------------------
 109 | 20th Century Fox
 110 | Bavaria Atelier
 101 | British Lion
 107 | Columbia
 102 | Jean Luc Godard
 113 | Luso films
 104 | Mosfilm
 103 | Paramount
 106 | Toho
 105 | United Artists
 111 | Walt Disney
 112 | Warner Bros.
 108 | Westward
</programlisting>
  </para>

  <para>
   The next example shows how to obtain the union of the tables
   <literal>distributors</literal> and
   <literal>actors</literal>, restricting the results to those that begin
   with the letter W in each table.  Only distinct rows are wanted, so the
   key word <literal>ALL</literal> is omitted.

<programlisting>
distributors:               actors:
 did |     name              id |     name
-----+--------------        ----+----------------
 108 | Westward               1 | Woody Allen
 111 | Walt Disney            2 | Warren Beatty
 112 | Warner Bros.           3 | Walter Matthau
 ...                         ...

SELECT distributors.name
    FROM distributors
    WHERE distributors.name LIKE 'W%'
UNION
SELECT actors.name
    FROM actors
    WHERE actors.name LIKE 'W%';

      name
----------------
 Walt Disney
 Walter Matthau
 Warner Bros.
 Warren Beatty
 Westward
 Woody Allen
</programlisting>
  </para>

  <para>
   This example shows how to use a function in the <literal>FROM</literal>
   clause, both with and without a column definition list:

<programlisting>
CREATE FUNCTION distributors(int) RETURNS SETOF distributors AS $$
    SELECT * FROM distributors WHERE did = $1;
$$ LANGUAGE SQL;

SELECT * FROM distributors(111);
 did |    name
-----+-------------
 111 | Walt Disney

CREATE FUNCTION distributors_2(int) RETURNS SETOF record AS $$
    SELECT * FROM distributors WHERE did = $1;
$$ LANGUAGE SQL;

SELECT * FROM distributors_2(111) AS (f1 int, f2 text);
 f1  |     f2
-----+-------------
 111 | Walt Disney
</programlisting>
  </para>

  <para>
   Here is an example of a function with an ordinality column added:

<programlisting>
SELECT * FROM unnest(ARRAY['a','b','c','d','e','f']) WITH ORDINALITY;
 unnest | ordinality
--------+----------
 a      |        1
 b      |        2
 c      |        3
 d      |        4
 e      |        5
 f      |        6
(6 rows)
</programlisting>
  </para>

  <para>
   This example shows how to use a simple <literal>WITH</literal> clause:

<programlisting>
WITH t AS (
    SELECT random() as x FROM generate_series(1, 3)
  )
SELECT * FROM t
UNION ALL
SELECT * FROM t;
         x
--------------------
  0.534150459803641
  0.520092216785997
 0.0735620250925422
  0.534150459803641
  0.520092216785997
 0.0735620250925422
</programlisting>

   Notice that the <literal>WITH</literal> query was evaluated only once,
   so that we got two sets of the same three random values.
  </para>

  <para>
   This example uses <literal>WITH RECURSIVE</literal> to find all
   subordinates (direct or indirect) of the employee Mary, and their
   level of indirectness, from a table that shows only direct
   subordinates:

<programlisting>
WITH RECURSIVE employee_recursive(distance, employee_name, manager_name) AS (
    SELECT 1, employee_name, manager_name
    FROM employee
    WHERE manager_name = 'Mary'
  UNION ALL
    SELECT er.distance + 1, e.employee_name, e.manager_name
    FROM employee_recursive er, employee e
    WHERE er.employee_name = e.manager_name
  )
SELECT distance, employee_name FROM employee_recursive;
</programlisting>

   Notice the typical form of recursive queries:
   an initial condition, followed by <literal>UNION ALL</literal>,
   followed by the recursive part of the query. Be sure that the
   recursive part of the query will eventually return no tuples, or
   else the query will loop indefinitely.  (See <xref linkend="queries-with"/>
   for more examples.)
  </para>

  <para>
   This example uses <literal>LATERAL</literal> to apply a set-returning function
   <function>get_product_names()</function> for each row of the
   <structname>manufacturers</structname> table:

<programlisting>
SELECT m.name AS mname, pname
FROM manufacturers m, LATERAL get_product_names(m.id) pname;
</programlisting>

    Manufacturers not currently having any products would not appear in the
    result, since it is an inner join.  If we wished to include the names of
    such manufacturers in the result, we could do:

<programlisting>
SELECT m.name AS mname, pname
FROM manufacturers m LEFT JOIN LATERAL get_product_names(m.id) pname ON true;
</programlisting></para>
 </refsect1>

 <refsect1>
  <title>Compatibility</title>

  <para>
   Of course, the <command>SELECT</command> statement is compatible
   with the SQL standard.  But there are some extensions and some
   missing features.
  </para>

  <refsect2>
   <title>Omitted <literal>FROM</literal> Clauses</title>

   <para>
    <productname>PostgreSQL</productname> allows one to omit the
    <literal>FROM</literal> clause.  It has a straightforward use to
    compute the results of simple expressions:
<programlisting>
SELECT 2+2;

 ?column?
----------
        4
</programlisting>
    Some other <acronym>SQL</acronym> databases cannot do this except
    by introducing a dummy one-row table from which to do the
    <command>SELECT</command>.
   </para>
  </refsect2>

  <refsect2>
   <title>Empty <literal>SELECT</literal> Lists</title>

   <para>
    The list of output expressions after <literal>SELECT</literal> can be
    empty, producing a zero-column result table.
    This is not valid syntax according to the SQL standard.
    <productname>PostgreSQL</productname> allows it to be consistent with
    allowing zero-column tables.
    However, an empty list is not allowed when <literal>DISTINCT</literal> is used.
   </para>
  </refsect2>

  <refsect2>
   <title>Omitting the <literal>AS</literal> Key Word</title>

   <para>
    In the SQL standard, the optional key word <literal>AS</literal> can be
    omitted before an output column name whenever the new column name
    is a valid column name (that is, not the same as any reserved
    keyword).  <productname>PostgreSQL</productname> is slightly more
    restrictive: <literal>AS</literal> is required if the new column name
    matches any keyword at all, reserved or not.  Recommended practice is
    to use <literal>AS</literal> or double-quote output column names, to prevent
    any possible conflict against future keyword additions.
   </para>

   <para>
    In <literal>FROM</literal> items, both the standard and
    <productname>PostgreSQL</productname> allow <literal>AS</literal> to
    be omitted before an alias that is an unreserved keyword.  But
    this is impractical for output column names, because of syntactic
    ambiguities.
   </para>
  </refsect2>

  <refsect2>
   <title>Omitting Sub-<command>SELECT</command> Aliases in <literal>FROM</literal></title>

   <para>
    According to the SQL standard, a sub-<command>SELECT</command> in the
    <literal>FROM</literal> list must have an alias.  In
    <productname>PostgreSQL</productname>, this alias may be omitted.
   </para>
  </refsect2>

  <refsect2>
   <title><literal>ONLY</literal> and Inheritance</title>

   <para>
    The SQL standard requires parentheses around the table name when
    writing <literal>ONLY</literal>, for example <literal>SELECT * FROM ONLY
    (tab1), ONLY (tab2) WHERE ...</literal>.  <productname>PostgreSQL</productname>
    considers these parentheses to be optional.
   </para>

   <para>
    <productname>PostgreSQL</productname> allows a trailing <literal>*</literal> to be written to
    explicitly specify the non-<literal>ONLY</literal> behavior of including
    child tables.  The standard does not allow this.
   </para>

   <para>
    (These points apply equally to all SQL commands supporting the
    <literal>ONLY</literal> option.)
   </para>
  </refsect2>

  <refsect2>
   <title><literal>TABLESAMPLE</literal> Clause Restrictions</title>

   <para>
    The <literal>TABLESAMPLE</literal> clause is currently accepted only on
    regular tables and materialized views.  According to the SQL standard
    it should be possible to apply it to any <literal>FROM</literal> item.
   </para>
  </refsect2>

  <refsect2>
   <title>Function Calls in <literal>FROM</literal></title>

   <para>
    <productname>PostgreSQL</productname> allows a function call to be
    written directly as a member of the <literal>FROM</literal> list.  In the SQL
    standard it would be necessary to wrap such a function call in a
    sub-<command>SELECT</command>; that is, the syntax
    <literal>FROM <replaceable>func</replaceable>(...) <replaceable>alias</replaceable></literal>
    is approximately equivalent to
    <literal>FROM LATERAL (SELECT <replaceable>func</replaceable>(...)) <replaceable>alias</replaceable></literal>.
    Note that <literal>LATERAL</literal> is considered to be implicit; this is
    because the standard requires <literal>LATERAL</literal> semantics for an
    <literal>UNNEST()</literal> item in <literal>FROM</literal>.
    <productname>PostgreSQL</productname> treats <literal>UNNEST()</literal> the
    same as other set-returning functions.
   </para>
  </refsect2>

  <refsect2>
   <title>Namespace Available to <literal>GROUP BY</literal> and <literal>ORDER BY</literal></title>

   <para>
    In the SQL-92 standard, an <literal>ORDER BY</literal> clause can
    only use output column names or numbers, while a <literal>GROUP
    BY</literal> clause can only use expressions based on input column
    names.  <productname>PostgreSQL</productname> extends each of
    these clauses to allow the other choice as well (but it uses the
    standard's interpretation if there is ambiguity).
    <productname>PostgreSQL</productname> also allows both clauses to
    specify arbitrary expressions.  Note that names appearing in an
    expression will always be taken as input-column names, not as
    output-column names.
   </para>

   <para>
    SQL:1999 and later use a slightly different definition which is not
    entirely upward compatible with SQL-92.
    In most cases, however, <productname>PostgreSQL</productname>
    will interpret an <literal>ORDER BY</literal> or <literal>GROUP
    BY</literal> expression the same way SQL:1999 does.
   </para>
  </refsect2>

  <refsect2>
   <title>Functional Dependencies</title>

   <para>
    <productname>PostgreSQL</productname> recognizes functional dependency
    (allowing columns to be omitted from <literal>GROUP BY</literal>) only when
    a table's primary key is included in the <literal>GROUP BY</literal> list.
    The SQL standard specifies additional conditions that should be
    recognized.
   </para>
  </refsect2>

  <refsect2>
   <title><literal>LIMIT</literal> and <literal>OFFSET</literal></title>

   <para>
    The clauses <literal>LIMIT</literal> and <literal>OFFSET</literal>
    are <productname>PostgreSQL</productname>-specific syntax, also
    used by <productname>MySQL</productname>.  The SQL:2008 standard
    has introduced the clauses <literal>OFFSET ... FETCH {FIRST|NEXT}
    ...</literal> for the same functionality, as shown above
    in <xref linkend="sql-limit"/>.  This
    syntax is also used by <productname>IBM DB2</productname>.
    (Applications written for <productname>Oracle</productname>
    frequently use a workaround involving the automatically
    generated <literal>rownum</literal> column, which is not available in
    PostgreSQL, to implement the effects of these clauses.)
   </para>
  </refsect2>

  <refsect2>
   <title><literal>FOR NO KEY UPDATE</literal>, <literal>FOR UPDATE</literal>, <literal>FOR SHARE</literal>, <literal>FOR KEY SHARE</literal></title>

   <para>
    Although <literal>FOR UPDATE</literal> appears in the SQL standard, the
    standard allows it only as an option of <command>DECLARE CURSOR</command>.
    <productname>PostgreSQL</productname> allows it in any <command>SELECT</command>
    query as well as in sub-<command>SELECT</command>s, but this is an extension.
    The <literal>FOR NO KEY UPDATE</literal>, <literal>FOR SHARE</literal> and
    <literal>FOR KEY SHARE</literal> variants, as well as the <literal>NOWAIT</literal>
    and <literal>SKIP LOCKED</literal> options, do not appear in the
    standard.
   </para>
  </refsect2>

  <refsect2>
   <title>Data-Modifying Statements in <literal>WITH</literal></title>

   <para>
    <productname>PostgreSQL</productname> allows <command>INSERT</command>,
    <command>UPDATE</command>, and <command>DELETE</command> to be used as <literal>WITH</literal>
    queries.  This is not found in the SQL standard.
   </para>
  </refsect2>

  <refsect2>
   <title>Nonstandard Clauses</title>

   <para>
    <literal>DISTINCT ON ( ... )</literal> is an extension of the
    SQL standard.
   </para>

   <para>
    <literal>ROWS FROM( ... )</literal> is an extension of the SQL standard.
   </para>

   <para>
    The <literal>MATERIALIZED</literal> and <literal>NOT
    MATERIALIZED</literal> options of <literal>WITH</literal> are extensions
    of the SQL standard.
   </para>
  </refsect2>

 </refsect1>
</refentry>