diff --git a/CVSROOT/checkoutlist b/CVSROOT/checkoutlist
deleted file mode 100644
index b04b350..0000000
--- a/CVSROOT/checkoutlist
+++ /dev/null
@@ -1,13 +0,0 @@
-# The "checkoutlist" file is used to support additional version controlled
-# administrative files in $CVSROOT/CVSROOT, such as template files.
-#
-# The first entry on a line is a filename which will be checked out from
-# the corresponding RCS file in the $CVSROOT/CVSROOT directory.
-# The remainder of the line is an error message to use if the file cannot
-# be checked out.
-#
-# File format:
-#
-#	[<whitespace>]<filename><whitespace><error message><end-of-line>
-#
-# comment lines begin with '#'
diff --git a/CVSROOT/commitinfo b/CVSROOT/commitinfo
deleted file mode 100644
index b19e7b7..0000000
--- a/CVSROOT/commitinfo
+++ /dev/null
@@ -1,15 +0,0 @@
-# The "commitinfo" file is used to control pre-commit checks.
-# The filter on the right is invoked with the repository and a list 
-# of files to check.  A non-zero exit of the filter program will 
-# cause the commit to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT.  For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".
diff --git a/CVSROOT/config b/CVSROOT/config
deleted file mode 100644
index ff43ec0..0000000
--- a/CVSROOT/config
+++ /dev/null
@@ -1,14 +0,0 @@
-# Set this to "no" if pserver shouldn't check system users/passwords
-#SystemAuth=no
-
-# Put CVS lock files in this directory rather than directly in the repository.
-#LockDir=/var/lock/cvs
-
-# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top
-# level of the new working directory when using the `cvs checkout'
-# command.
-#TopLevelAdmin=no
-
-# Set `LogHistory' to `all' or `TOFEWGCMAR' to log all transactions to the
-# history file, or a subset as needed (ie `TMAR' logs all write operations)
-#LogHistory=TOFEWGCMAR
diff --git a/CVSROOT/cvswrappers b/CVSROOT/cvswrappers
deleted file mode 100644
index 0accaf1..0000000
--- a/CVSROOT/cvswrappers
+++ /dev/null
@@ -1,23 +0,0 @@
-# This file affects handling of files based on their names.
-#
-# The -t/-f options allow one to treat directories of files
-# as a single file, or to transform a file in other ways on
-# its way in and out of CVS.
-#
-# The -m option specifies whether CVS attempts to merge files.
-#
-# The -k option specifies keyword expansion (e.g. -kb for binary).
-#
-# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers)
-#
-#  wildcard	[option value][option value]...
-#
-#  where option is one of
-#  -f		from cvs filter		value: path to filter
-#  -t		to cvs filter		value: path to filter
-#  -m		update methodology	value: MERGE or COPY
-#  -k		expansion mode		value: b, o, kkv, &c
-#
-#  and value is a single-quote delimited value.
-# For example:
-#*.gif -k 'b'
diff --git a/CVSROOT/editinfo b/CVSROOT/editinfo
deleted file mode 100644
index d78886c..0000000
--- a/CVSROOT/editinfo
+++ /dev/null
@@ -1,21 +0,0 @@
-# The "editinfo" file is used to allow verification of logging
-# information.  It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure.  Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-#   Making sure that the entered bug-id number is correct.
-#   Validating that the code that was reviewed is indeed the code being
-#       checked in (using the bug-id number or a seperate review
-#       number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported.  There can be only one entry that matches a given
-# repository.
diff --git a/CVSROOT/loginfo b/CVSROOT/loginfo
deleted file mode 100644
index 5a59f0a..0000000
--- a/CVSROOT/loginfo
+++ /dev/null
@@ -1,26 +0,0 @@
-# The "loginfo" file controls where "cvs commit" log information
-# is sent.  The first entry on a line is a regular expression which must match
-# the directory that the change is being made to, relative to the
-# $CVSROOT.  If a match is found, then the remainder of the line is a filter
-# program that should expect log information on its standard input.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name ALL appears as a regular expression it is always used
-# in addition to the first matching regex or DEFAULT.
-#
-# You may specify a format string as part of the
-# filter.  The string is composed of a `%' followed
-# by a single format character, or followed by a set of format
-# characters surrounded by `{' and `}' as separators.  The format
-# characters are:
-#
-#   s = file name
-#   V = old version number (pre-checkin)
-#   v = new version number (post-checkin)
-#
-# For example:
-#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog
-# or
-#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog
diff --git a/CVSROOT/modules b/CVSROOT/modules
deleted file mode 100644
index cb9e9ef..0000000
--- a/CVSROOT/modules
+++ /dev/null
@@ -1,26 +0,0 @@
-# Three different line formats are valid:
-#	key	-a    aliases...
-#	key [options] directory
-#	key [options] directory files...
-#
-# Where "options" are composed of:
-#	-i prog		Run "prog" on "cvs commit" from top-level of module.
-#	-o prog		Run "prog" on "cvs checkout" of module.
-#	-e prog		Run "prog" on "cvs export" of module.
-#	-t prog		Run "prog" on "cvs rtag" of module.
-#	-u prog		Run "prog" on "cvs update" of module.
-#	-d dir		Place module in directory "dir" instead of module name.
-#	-l		Top-level directory only -- do not recurse.
-#
-# NOTE:  If you change any of the "Run" options above, you'll have to
-# release and re-checkout any working directories of these modules.
-#
-# And "directory" is a path to a directory relative to $CVSROOT.
-#
-# The "-a" option specifies an alias.  An alias is interpreted as if
-# everything on the right of the "-a" had been typed on the command line.
-#
-# You can encode a module within a module by using the special '&'
-# character to interpose another module into the current module.  This
-# can be useful for creating a module that consists of many directories
-# spread out over the entire source repository.
diff --git a/CVSROOT/notify b/CVSROOT/notify
deleted file mode 100644
index 34f0bc2..0000000
--- a/CVSROOT/notify
+++ /dev/null
@@ -1,12 +0,0 @@
-# The "notify" file controls where notifications from watches set by
-# "cvs watch add" or "cvs edit" are sent.  The first entry on a line is
-# a regular expression which is tested against the directory that the
-# change is being made to, relative to the $CVSROOT.  If it matches,
-# then the remainder of the line is a filter program that should contain
-# one occurrence of %s for the user to notify, and information on its
-# standard input.
-#
-# "ALL" or "DEFAULT" can be used in place of the regular expression.
-#
-# For example:
-#ALL mail %s -s "CVS notification"
diff --git a/CVSROOT/rcsinfo b/CVSROOT/rcsinfo
deleted file mode 100644
index 49e59f4..0000000
--- a/CVSROOT/rcsinfo
+++ /dev/null
@@ -1,13 +0,0 @@
-# The "rcsinfo" file is used to control templates with which the editor
-# is invoked on commit and import.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being made to, relative to the
-# $CVSROOT.  For the first match that is found, then the remainder of the
-# line is the name of the file that contains the template.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".
diff --git a/CVSROOT/taginfo b/CVSROOT/taginfo
deleted file mode 100644
index 274a46d..0000000
--- a/CVSROOT/taginfo
+++ /dev/null
@@ -1,20 +0,0 @@
-# The "taginfo" file is used to control pre-tag checks.
-# The filter on the right is invoked with the following arguments:
-#
-# $1 -- tagname
-# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d
-# $3 -- repository
-# $4->  file revision [file revision ...]
-#
-# A non-zero exit of the filter program will cause the tag to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT.  For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".
diff --git a/CVSROOT/verifymsg b/CVSROOT/verifymsg
deleted file mode 100644
index 86f747c..0000000
--- a/CVSROOT/verifymsg
+++ /dev/null
@@ -1,21 +0,0 @@
-# The "verifymsg" file is used to allow verification of logging
-# information.  It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure.  Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-#   Making sure that the entered bug-id number is correct.
-#   Validating that the code that was reviewed is indeed the code being
-#       checked in (using the bug-id number or a seperate review
-#       number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported.  There can be only one entry that matches a given
-# repository.