[[rest-swagger-component]]
= REST Swagger Component
:page-source: components/camel-rest-swagger/src/main/docs/rest-swagger-component.adoc

*Since Camel 2.19*

// HEADER START
*Only producer is supported*
// HEADER END

The REST Swagger* configures rest producers from
http://swagger.io/[Swagger] (Open API) specification document and
delegates to a component implementing the _RestProducerFactory_
interface. Currently known working components are:

* xref:http-component.adoc[http]
* xref:netty-http-component.adoc[netty-http]
* xref:undertow-component.adoc[undertow]

Maven users will need to add the following dependency to their
`pom.xml` for this component:

[source,xml]
------------------------------------------------------------
<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-rest-swagger</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>
------------------------------------------------------------

== URI format

[source,java]
-------------------------------------------------------
rest-swagger:[specificationPath#]operationId
-------------------------------------------------------

Where `operationId` is the ID of the operation in the Swagger
specification, and `specificationPath` is the path to the
specification.
If the `specificationPath` is not specified it defaults to
`swagger.json`. The lookup mechanism uses Camels `ResourceHelper` to
load the resource, which means that you can use CLASSPATH resources 
(`classpath:my-specification.json`), files 
(`file:/some/path.json`), the web 
(`\http://api.example.com/swagger.json`) or reference a bean 
(`ref:nameOfBean`) or use a method of a bean 
(`bean:nameOfBean.methodName`) to get the specification resource,
failing that Swagger's own resource loading support.

This component does not act as a HTTP client, it delegates that to
another component mentioned above. The lookup mechanism searches for a
single component that implements the _RestProducerFactory_ interface and
uses that. If the CLASSPATH contains more than one, then the property
`componentName` should be set to indicate which component to delegate
to.

Most of the configuration is taken from the Swagger specification but
the option exists to override those by specifying them on the component
or on the endpoint. Typically you would just need to override the 
`host` or `basePath` if those differ from the specification.

NOTE: The `host` parameter should contain the absolute URI containing
scheme, hostname and port number, for instance:
`\https://api.example.com`

With `componentName` you specify what component is used to perform the
requests, this named component needs to be present in the Camel context
and implement the required _RestProducerFactory_ interface -- as do the
components listed at the top.

If you do not specify the _componentName_ at either component or 
endpoint level, CLASSPATH is searched for a suitable delegate. There 
should be only one component present on the CLASSPATH that implements 
the _RestProducerFactory_ interface for this to work.

This component's endpoint URI is lenient which means that in addition
to message headers you can specify REST operation's parameters as
endpoint parameters, these will be constant for all subsequent
invocations so it makes sense to use this feature only for parameters
that are indeed constant for all invocations -- for example API version
in path such as `/api/\{version\}/users/\{id\}`. 

== Options

// component options: START
The REST Swagger component supports 11 options, which are listed below.


[width="100%",cols="2,5,^1,2",options="header"]
|===
| Name | Description | Default | Type
| *basePath* (producer) | API basePath, for example /v2. Default is unset, if set overrides the value present in Swagger specification. |  | String
| *componentName* (producer) | Name of the Camel component that will perform the requests. The component must be present in Camel registry and it must implement RestProducerFactory service provider interface. If not set CLASSPATH is searched for single component that implements RestProducerFactory SPI. Can be overridden in endpoint configuration. |  | String
| *consumes* (producer) | What payload type this component capable of consuming. Could be one type, like application/json or multiple types as application/json, application/xml; q=0.5 according to the RFC7231. This equates to the value of Accept HTTP header. If set overrides any value found in the Swagger specification. Can be overridden in endpoint configuration |  | String
| *host* (producer) | Scheme hostname and port to direct the HTTP requests to in the form of \https://hostname:port. Can be configured at the endpoint, component or in the corresponding REST configuration in the Camel Context. If you give this component a name (e.g. petstore) that REST configuration is consulted first, rest-swagger next, and global configuration last. If set overrides any value found in the Swagger specification, RestConfiguration. Can be overridden in endpoint configuration. |  | String
| *produces* (producer) | What payload type this component is producing. For example application/json according to the RFC7231. This equates to the value of Content-Type HTTP header. If set overrides any value present in the Swagger specification. Can be overridden in endpoint configuration. |  | String
| *specificationUri* (producer) | Path to the Swagger specification file. The scheme, host base path are taken from this specification, but these can be overridden with properties on the component or endpoint level. If not given the component tries to load swagger.json resource. Note that the host defined on the component and endpoint of this Component should contain the scheme, hostname and optionally the port in the URI syntax (i.e. \https://api.example.com:8080). Can be overridden in endpoint configuration. | swagger.json | URI
| *sslContextParameters* (security) | Customize TLS parameters used by the component. If not set defaults to the TLS parameters set in the Camel context |  | SSLContextParameters
| *useGlobalSslContext Parameters* (security) | Enable usage of global SSL context parameters. | false | boolean
| *basicPropertyBinding* (advanced) | Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities | false | boolean
| *lazyStartProducer* (producer) | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel's routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | boolean
| *bridgeErrorHandler* (consumer) | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | boolean
|===
// component options: END

// endpoint options: START
The REST Swagger endpoint is configured using URI syntax:

----
rest-swagger:specificationUri#operationId
----

with the following path and query parameters:

=== Path Parameters (2 parameters):


[width="100%",cols="2,5,^1,2",options="header"]
|===
| Name | Description | Default | Type
| *specificationUri* | Path to the Swagger specification file. The scheme, host base path are taken from this specification, but these can be overridden with properties on the component or endpoint level. If not given the component tries to load swagger.json resource from the classpath. Note that the host defined on the component and endpoint of this Component should contain the scheme, hostname and optionally the port in the URI syntax (i.e. \http://api.example.com:8080). Overrides component configuration. The Swagger specification can be loaded from different sources by prefixing with file: classpath: http: https:. Support for https is limited to using the JDK installed UrlHandler, and as such it can be cumbersome to setup TLS/SSL certificates for https (such as setting a number of javax.net.ssl JVM system properties). How to do that consult the JDK documentation for UrlHandler. | swagger.json | URI
| *operationId* | *Required* ID of the operation from the Swagger specification. |  | String
|===


=== Query Parameters (9 parameters):


[width="100%",cols="2,5,^1,2",options="header"]
|===
| Name | Description | Default | Type
| *basePath* (producer) | API basePath, for example /v2. Default is unset, if set overrides the value present in Swagger specification and in the component configuration. |  | String
| *componentName* (producer) | Name of the Camel component that will perform the requests. The component must be present in Camel registry and it must implement RestProducerFactory service provider interface. If not set CLASSPATH is searched for single component that implements RestProducerFactory SPI. Overrides component configuration. |  | String
| *consumes* (producer) | What payload type this component capable of consuming. Could be one type, like application/json or multiple types as application/json, application/xml; q=0.5 according to the RFC7231. This equates to the value of Accept HTTP header. If set overrides any value found in the Swagger specification and. in the component configuration |  | String
| *host* (producer) | Scheme hostname and port to direct the HTTP requests to in the form of \https://hostname:port. Can be configured at the endpoint, component or in the corresponding REST configuration in the Camel Context. If you give this component a name (e.g. petstore) that REST configuration is consulted first, rest-swagger next, and global configuration last. If set overrides any value found in the Swagger specification, RestConfiguration. Overrides all other configuration. |  | String
| *lazyStartProducer* (producer) | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel's routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | boolean
| *produces* (producer) | What payload type this component is producing. For example application/json according to the RFC7231. This equates to the value of Content-Type HTTP header. If set overrides any value present in the Swagger specification. Overrides all other configuration. |  | String
| *basicPropertyBinding* (advanced) | Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities | false | boolean
| *synchronous* (advanced) | Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported). | false | boolean
| *sslContextParameters* (security) | To configure security using SSLContextParameters. |  | SSLContextParameters
|===
// endpoint options: END
// spring-boot-auto-configure options: START
== Spring Boot Auto-Configuration

When using Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

[source,xml]
----
<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-rest-swagger-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>
----


The component supports 12 options, which are listed below.


[width="100%",cols="2,5,^1,2",options="header"]
|===
| Name | Description | Default | Type
| *camel.component.rest-swagger.base-path* | API basePath, for example /v2. Default is unset, if set overrides the value present in Swagger specification. |  | String
| *camel.component.rest-swagger.basic-property-binding* | Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities | false | Boolean
| *camel.component.rest-swagger.bridge-error-handler* | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | Boolean
| *camel.component.rest-swagger.component-name* | Name of the Camel component that will perform the requests. The component must be present in Camel registry and it must implement RestProducerFactory service provider interface. If not set CLASSPATH is searched for single component that implements RestProducerFactory SPI. Can be overridden in endpoint configuration. |  | String
| *camel.component.rest-swagger.consumes* | What payload type this component capable of consuming. Could be one type, like application/json or multiple types as application/json, application/xml; q=0.5 according to the RFC7231. This equates to the value of Accept HTTP header. If set overrides any value found in the Swagger specification. Can be overridden in endpoint configuration |  | String
| *camel.component.rest-swagger.enabled* | Whether to enable auto configuration of the rest-swagger component. This is enabled by default. |  | Boolean
| *camel.component.rest-swagger.host* | Scheme hostname and port to direct the HTTP requests to in the form of \https://hostname:port. Can be configured at the endpoint, component or in the corresponding REST configuration in the Camel Context. If you give this component a name (e.g. petstore) that REST configuration is consulted first, rest-swagger next, and global configuration last. If set overrides any value found in the Swagger specification, RestConfiguration. Can be overridden in endpoint configuration. |  | String
| *camel.component.rest-swagger.lazy-start-producer* | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel's routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | Boolean
| *camel.component.rest-swagger.produces* | What payload type this component is producing. For example application/json according to the RFC7231. This equates to the value of Content-Type HTTP header. If set overrides any value present in the Swagger specification. Can be overridden in endpoint configuration. |  | String
| *camel.component.rest-swagger.specification-uri* | Path to the Swagger specification file. The scheme, host base path are taken from this specification, but these can be overridden with properties on the component or endpoint level. If not given the component tries to load swagger.json resource. Note that the host defined on the component and endpoint of this Component should contain the scheme, hostname and optionally the port in the URI syntax (i.e. \https://api.example.com:8080). Can be overridden in endpoint configuration. |  | URI
| *camel.component.rest-swagger.ssl-context-parameters* | Customize TLS parameters used by the component. If not set defaults to the TLS parameters set in the Camel context. The option is a org.apache.camel.support.jsse.SSLContextParameters type. |  | String
| *camel.component.rest-swagger.use-global-ssl-context-parameters* | Enable usage of global SSL context parameters. | false | Boolean
|===
// spring-boot-auto-configure options: END


== Example: PetStore

Checkout the example in the `camel-example-rest-swagger` project in
the `examples` directory.

For example if you wanted to use the 
http://petstore.swagger.io/[_PetStore_] provided REST API simply
reference the specification URI and desired operation id from the
Swagger specification or download the specification and store it as
`swagger.json` (in the root) of CLASSPATH that way it will be 
automaticaly used. Let's use the xref:undertow-component.adoc[Undertow]
component to perform all the requests and Camels excelent support for 
Spring Boot.

Here are our dependencies defined in Maven POM file:

[source,xml]
----
<dependency>
  <groupId>org.apache.camel</groupId>
  <artifactId>camel-undertow-starter</artifactId>
</dependency>

<dependency>
  <groupId>org.apache.camel</groupId>
  <artifactId>camel-rest-swagger-starter</artifactId>
</dependency>
----

Start by defining the _Undertow_ component and the
_RestSwaggerComponent_:

[source,java]
----
@Bean
public Component petstore(CamelContext camelContext, UndertowComponent undertow) {
    RestSwaggerComponent petstore = new RestSwaggerComponent(camelContext);
    petstore.setSpecificationUri("http://petstore.swagger.io/v2/swagger.json");
    petstore.setDelegate(undertow);

    return petstore;
}
----

NOTE: Support in Camel for Spring Boot will auto create the 
`UndertowComponent` Spring bean, and you can configure it using
`application.properties` (or `application.yml`) using prefix
`camel.component.undertow.`. We are defining the `petstore`
component here in order to have a named component in the Camel context
that we can use to interact with the PetStore REST API, if this is the
only `rest-swagger` component used we might configure it in the same
manner (using `application.properties`).

Now in our application we can simply use the `ProducerTemplate` to
invoke PetStore REST methods:

[source,java]
----
@Autowired
ProducerTemplate template;

String getPetJsonById(int petId) {
    return template.requestBodyAndHeaders("petstore:getPetById", null, "petId", petId);
}
----