[[OnCompletion-OnCompletion]]
OnCompletion
~~~~~~~~~~~~

Camel has this concept of a Unit of Work that encompass the
link:exchange.html[Exchange]. The unit of work among others supports
synchronization callbacks that are invoked when the
link:exchange.html[Exchange] is complete. The callback API is defined in
`org.apache.camel.spi.Synchronization`. From *Camel 2.14* onwards we
have an extended synchronization
`org.apache.camel.spi.SynchronizationRouteAware` that have callbacks for
route events.

*Getting the UnitOfWork*

You can get hold of the `org.apache.camel.spi.UnitOfWork` from
`org.apache.camel.Exchange` with the method `getUnitOfWork()`.

In Camel 2.0 we have added DSL for these callbacks using the new
*onCompletion* DSL name.

*onCompletion* supports the following features:

* scope: global and/or per route (route scope override all global scope)
* multiple global scope
* triggered either always, only if completed with success, or only if
failed
* `onWhen` predicate to only trigger in certain situations
* *Camel 2.14:* mode: to define whether to run either before or after
route consumer writes response back to callee (if its InOut)
* *Camel 2.14:*whether to run async or sync (use a thread pool or not)

From *Camel 2.14* onwards the onCompletion has been modified to support
running the completion task in either synchronous or asynchronous mode
(using a thread pool) and also whether to run before or after the route
consumer is done. The reason is to give more flexibility. For example to
specify to run synchronous and before the route consumer is done, which
allows to modify the exchange before the consumer writes back any
response to the callee. You can use this to for example add customer
headers, or send to a log to log the response message, etc.


*Changes from Camel 2.14 onwards*
The onCompletion has changed defaults and behavior from Camel 2.14
onwards. It now runs
* Runs synchronously without any thread pool
In Camel 2.13 the defaults were
* Runs asynchronous using a thread pool


*Camel 2.13 or older - On completion runs in separate thread*

The *onCompletion* runs in a separate thread in parallel with the
original route. It is therefore not intended to influence the outcome of
the original route. The idea for on completion is to spin off a new
thread to eg send logs to a central log database, send an email, send
alterts to a monitoring system, store a copy of the result message
etc. +
 Therefore if you want to do some work that influence the original
route, then do *not* use *onCompletion* for that. Notice: if you use the
`UnitOfWork` API as mentioned in the top of this page, then you can
register a `Synchronization` callback on the
link:exchange.html[Exchange] which is executed in the original route.
That way allows you to do some custom code when the route is completed;
this is how custom components can enlist on completion services which
they need, eg the link:file2.html[File] component does that for work
that moves/deletes the original file etc.

[[OnCompletion-onCompletionwithroutescope]]
onCompletion with route scope
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

The *onCompletion* DSL allows you to add custom routes/processors when
the original link:exchange.html[Exchange] is complete. Camel spin off a
copy of the link:exchange.html[Exchange] and routes it in a separate
thread, kinda like a link:wire-tap.html[Wire Tap]. This allows the
original thread to continue while the *onCompletion* route is running
concurrently. We decided for this model as we did not want the
*onCompletion* route to interfere with the original route.

*Only 1 onCompletion supported by route scope*

You can only have 1 onCompletion in a route. Only at context scoped
level you can have multiple. And notice that when you use a route scoped
onCompletion then any context scoped are disabled for that given route.

[source,java]
-----------------------------------------------------------
from("direct:start")
    .onCompletion()
        // this route is only invoked when the original route is complete as a kind
        // of completion callback
        .to("log:sync")
        .to("mock:sync")
    // must use end to denote the end of the onCompletion route
    .end()
    // here the original route contiues
    .process(new MyProcessor())
    .to("mock:result");
-----------------------------------------------------------

By default the *onCompletion* will be triggered when the
link:exchange.html[Exchange] is complete and regardless if the
link:exchange.html[Exchange] completed with success or with an failure
(such as an Exception was thrown). You can limit the trigger to only
occur `onCompleteOnly` or by `onFailureOnly` as shown below:

[source,java]
-----------------------------------------------------------
from("direct:start")
    // here we qualify onCompletion to only invoke when the exchange failed (exception or FAULT body)
    .onCompletion().onFailureOnly()
        .to("log:sync")
        .to("mock:sync")
    // must use end to denote the end of the onCompletion route
    .end()
    // here the original route continues
    .process(new MyProcessor())
    .to("mock:result");
-----------------------------------------------------------

You can identify if the link:exchange.html[Exchange] is an
*onCompletion* link:exchange.html[Exchange] as Camel will add the
property `Exchange.ON_COMPLETION` with a boolean value of `true` when it
spin offs the *onCompletion* link:exchange.html[Exchange].

[[OnCompletion-UsingonCompletionfromSpringDSL]]
Using onCompletion from Spring DSL
++++++++++++++++++++++++++++++++++

The onCompletion is defined like this with Spring DSL:

[source,xml]
-----------------------------------------------------------
<route>
    <from uri="direct:start"/>
    <!-- this onCompletion block will only be executed when the exchange is done being routed -->
    <!-- this callback is always triggered even if the exchange failed -->
    <onCompletion>
        <!-- so this is a kinda like an after completion callback -->
        <to uri="log:sync"/>
        <to uri="mock:sync"/>
    </onCompletion>
    <process ref="myProcessor"/>
    <to uri="mock:result"/>
</route>
-----------------------------------------------------------

And the `onCompleteOnly` and `onFailureOnly` is defined as a boolean
attribute on the <onCompletion> tag so the failure example would be:

[source,xml]
-----------------------------------------------------------
<route>
    <from uri="direct:start"/>
    <!-- this onCompletion block will only be executed when the exchange is done being routed -->
    <!-- this callback is only triggered when the exchange failed, as we have onFailure=true -->
    <onCompletion onFailureOnly="true">
        <to uri="log:sync"/>
        <to uri="mock:sync"/>
    </onCompletion>
    <process ref="myProcessor"/>
    <to uri="mock:result"/>
</route>
-----------------------------------------------------------

[[OnCompletion-onCompletionwithglobalscope]]
onCompletion with global scope
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

This works just like the route scope except from the fact that they are
defined globally. An example below:

[source,java]
-----------------------------------------------------------
// define a global on completion that is invoked when the exchange is complete
onCompletion().to("log:global").to("mock:sync");
 
from("direct:start")
    .process(new MyProcessor())
    .to("mock:result");
-----------------------------------------------------------

[[OnCompletion-UsingonCompletionfromSpringDSL.1]]
Using onCompletion from Spring DSL
++++++++++++++++++++++++++++++++++

This works just like the route scope except from the fact that they are
defined globally. An example below:

[source,xml]
-----------------------------------------------------------
<!-- this is a global onCompletion route that is invoke when any exchange is complete
     as a kind of after callback -->
<onCompletion>
    <to uri="log:global"/>
    <to uri="mock:sync"/>
</onCompletion>
 
<route>
    <from uri="direct:start"/>
    <process ref="myProcessor"/>
    <to uri="mock:result"/>
</route>
-----------------------------------------------------------


*Route scope override Global scope*
If an *onCompletion* is defined in a route, it overrides *all* global
scoped and thus its only the route scoped that are used. The globally
scoped ones are never used.

[[OnCompletion-UsingonCompletionwithonWhenpredicate]]
Using onCompletion with onWhen predicate
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

As other DSL in Camel you can attach a link:predicate.html[Predicate] to
the *onCompletion* so it only triggers in certain conditions, when the
predicate matches. For example to only trigger if the message body contains the word
`Hello` we can do like:

[source,java]
-----------------------------------------------------------
from("direct:start")
    .onCompletion().onWhen(body().contains("Hello"))
        // this route is only invoked when the original route is complete as a kind
        // of completion callback. And also only if the onWhen predicate is true
        .to("log:sync")
        .to("mock:sync")
    // must use end to denote the end of the onCompletion route
    .end()
    // here the original route contiues
    .to("log:original")
    .to("mock:result");
-----------------------------------------------------------

[[OnCompletion-UsingonCompletionwithorwithoutthreadpool]]
Using onCompletion with or without thread pool
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

*Available as of Camel 2.14*

OnCompletion will from Camel 2.14 onwards not use thread pool by
default. To use thread pool then either set a `executorService` or set
`parallelProcessing` to true.

For example in Java DSL do

[source,java]
-----------------------------------------------------------
                onCompletion().parallelProcessing()
                    .to("mock:before")
                    .delay(1000)
                    .setBody(simple("OnComplete:${body}"));
-----------------------------------------------------------

And in XML DSL

[source,java]
--------------------------------------------------------------
      <onCompletion parallelProcessing="true">
        <to uri="before"/>
        <delay><constant>1000</constant></delay>
        <setBody><simple>OnComplete:${body}</simple></setBody>
      </onCompletion>
--------------------------------------------------------------

You can also refer to a specific link:threading-model.html[thread pool]
to be used, using the executorServiceRef option

[source,java]
--------------------------------------------------------------
      <onCompletion executorServiceRef="myThreadPool">
        <to uri="before"/>
        <delay><constant>1000</constant></delay>
        <setBody><simple>OnComplete:${body}</simple></setBody>
      </onCompletion>
--------------------------------------------------------------

 
[[OnCompletion-UsingonCompletiontorunbeforerouteconsumersendsbackresponsetocallee]]
Using onCompletion to run before route consumer sends back response to callee
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

*Available as of Camel 2.14*

OnCompletion supports two modes

* AfterConsumer - Default mode which runs after the consumer is done
* BeforeConsumer - Runs before the consumer is done, and before the
consumer writes back response to the callee

The AfterConsumer mode is the default mode which is the same behavior as
in older Camel releases.

The new BeforeConsumer mode is used to run onCompletion before the
consumer writes its response back to the callee (if in InOut mode). This
allows the onCompletion to modify the Exchange, such as adding special
headers, or to log the Exchange as a response logger etc.

For example to always add a "created by" header you
use `modeBeforeConsumer()` as shown below:

[source,java]
----------------------------------------------------
    .onCompletion().modeBeforeConsumer()
        .setHeader("createdBy", constant("Someone"))
    .end()
----------------------------------------------------

 
And in XML DSL you set the mode attribute to BeforeConsumer:

[source,java]
------------------------------------------
      <onCompletion mode="BeforeConsumer">
        <setHeader headerName="createdBy">
          <constant>Someone</constant>
        </setHeader>
      </onCompletion>
------------------------------------------

 
[[OnCompletion-SeeAlso]]
See Also
^^^^^^^^

* Unit of Work