[[iec60870-client-component]]
= IEC 60870 Client Component
//THIS FILE IS COPIED: EDIT THE SOURCE FILE:
:page-source: components/camel-iec60870/src/main/docs/iec60870-client-component.adoc
:docTitle: IEC 60870 Client
:artifactId: camel-iec60870
:description: IEC 60870 supervisory control and data acquisition (SCADA) client using NeoSCADA implementation.
:since: 2.20
:supportLevel: Stable
:component-header: Both producer and consumer are supported

*Since Camel {since}*

*{component-header}*

The IEC 60870-5-104 Client component provides access to IEC 60870 servers using the
http://eclipse.org/eclipsescada[Eclipse NeoSCADA] implementation.

Maven users will need to add the following dependency to their `pom.xml`
for this component:

[source,xml]
----
<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-iec60870</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>
----

// component options: START
The IEC 60870 Client component supports 4 options, which are listed below.


[width="100%",cols="2,5,^1,2",options="header"]
|===
| Name | Description | Default | Type
| *defaultConnectionOptions* (common) | Default connection options |  | ClientOptions
| *bridgeErrorHandler* (consumer) | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | boolean
| *lazyStartProducer* (producer) | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel's routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | boolean
| *basicPropertyBinding* (advanced) | Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities | false | boolean
|===
// component options: END


== URI format

The URI syntax of the endpoint is: 

[source]
----
iec60870-client:host:port/00-01-02-03-04
----

The information object address is encoded in the path in the syntax shows above. Please
note that always the full, 5 octet address format is being used. Unused octets have to be filled
with zero.

== URI options


// endpoint options: START
The IEC 60870 Client endpoint is configured using URI syntax:

----
iec60870-client:uriPath
----

with the following path and query parameters:

=== Path Parameters (1 parameters):


[width="100%",cols="2,5,^1,2",options="header"]
|===
| Name | Description | Default | Type
| *uriPath* | *Required* The object information address |  | ObjectAddress
|===


=== Query Parameters (22 parameters):


[width="100%",cols="2,5,^1,2",options="header"]
|===
| Name | Description | Default | Type
| *dataModuleOptions* (common) | Data module options |  | DataModuleOptions
| *protocolOptions* (common) | Protocol options |  | ProtocolOptions
| *bridgeErrorHandler* (consumer) | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | boolean
| *exceptionHandler* (consumer) | To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored. |  | ExceptionHandler
| *exchangePattern* (consumer) | Sets the exchange pattern when the consumer creates an exchange. The value can be one of: InOnly, InOut, InOptionalOut |  | ExchangePattern
| *lazyStartProducer* (producer) | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel's routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | boolean
| *basicPropertyBinding* (advanced) | Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities | false | boolean
| *synchronous* (advanced) | Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported). | false | boolean
| *acknowledgeWindow* (connection) | Parameter W - Acknowledgment window. | 10 | short
| *adsuAddressType* (connection) | The common ASDU address size. May be either SIZE_1 or SIZE_2. The value can be one of: SIZE_1, SIZE_2 |  | ASDUAddressType
| *causeOfTransmissionType* (connection) | The cause of transmission type. May be either SIZE_1 or SIZE_2. The value can be one of: SIZE_1, SIZE_2 |  | CauseOfTransmissionType
| *informationObjectAddressType* (connection) | The information address size. May be either SIZE_1, SIZE_2 or SIZE_3. The value can be one of: SIZE_1, SIZE_2, SIZE_3 |  | InformationObjectAddressType
| *maxUnacknowledged* (connection) | Parameter K - Maximum number of un-acknowledged messages. | 15 | short
| *timeout1* (connection) | Timeout T1 in milliseconds. | 15000 | int
| *timeout2* (connection) | Timeout T2 in milliseconds. | 10000 | int
| *timeout3* (connection) | Timeout T3 in milliseconds. | 20000 | int
| *causeSourceAddress* (data) | Whether to include the source address |  | byte
| *connectionTimeout* (data) | Timeout in millis to wait for client to establish a connected connection. | 10000 | int
| *ignoreBackgroundScan* (data) | Whether background scan transmissions should be ignored. | true | boolean
| *ignoreDaylightSavingTime* (data) | Whether to ignore or respect DST | false | boolean
| *timeZone* (data) | The timezone to use. May be any Java time zone string | UTC | TimeZone
| *connectionId* (id) | An identifier grouping connection instances |  | String
|===
// endpoint options: END


A connection instance if identified by the host and port part of the URI, plus all parameters in the "id" group.
If a new connection id is encountered the connection options will be evaluated and the connection instance
is created with those options.


[NOTE]
If two URIs specify the same connection (host, port, …) but different connection options, then it is
undefined which of those connection options will be used. 


The final connection options will be evaluated in the following order:

* If present, the +connectionOptions+ parameter will be used
* Otherwise the +defaultConnectionOptions+ instance is copied and customized in the following steps
* Apply +protocolOptions+ if present
* Apply +dataModuleOptions+ if present
* Apply all explicit connection parameters (e.g. +timeZone+)

include::camel-spring-boot::page$iec60870-starter.adoc[]