[[hdfs-component]]
= HDFS Component
//THIS FILE IS COPIED: EDIT THE SOURCE FILE:
:page-source: components/camel-hdfs/src/main/docs/hdfs-component.adoc
:docTitle: HDFS
:artifactId: camel-hdfs
:description: Read and write from/to an HDFS filesystem using Hadoop 2.x.
:since: 2.14
:supportLevel: Stable
:component-header: Both producer and consumer are supported

*Since Camel {since}*

*{component-header}*

The HDFS component enables you to read and write messages from/to an
HDFS file system using Hadoop 2.x. HDFS is the distributed file system
at the heart of http://hadoop.apache.org[Hadoop].

Maven users will need to add the following dependency to their `pom.xml`
for this component:

[source,xml]
------------------------------------------------------------
<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-hdfs</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>
------------------------------------------------------------

== URI format

[source,java]
----------------------------------------
hdfs://hostname[:port][/path][?options]
----------------------------------------

You can append query options to the URI in the following format,
`?option=value&option=value&...` +
 The path is treated in the following way:

1.  as a consumer, if it's a file, it just reads the file, otherwise if
it represents a directory it scans all the file under the path
satisfying the configured pattern. All the files under that directory
must be of the same type.
2.  as a producer, if at least one split strategy is defined, the path
is considered a directory and under that directory the producer creates
a different file per split named using the configured
UuidGenerator.


When consuming from hdfs then in normal mode, a file is split into
chunks, producing a message per chunk. You can configure the size of the
chunk using the chunkSize option. If you want to read from hdfs and
write to a regular file using the file component, then you can use the
fileMode=Append to append each of the chunks together.

== Options


// component options: START
The HDFS component supports 5 options, which are listed below.


[width="100%",cols="2,5,^1,2",options="header"]
|===
| Name | Description | Default | Type
| *bridgeErrorHandler* (consumer) | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | boolean
| *lazyStartProducer* (producer) | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel's routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | boolean
| *basicPropertyBinding* (advanced) | Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities | false | boolean
| *jAASConfiguration* (security) | To use the given configuration for security with JAAS. |  | Configuration
| *kerberosConfigFile* (security) | To use kerberos authentication, set the value of the 'java.security.krb5.conf' environment variable to an existing file. If the environment variable is already set, warn if different than the specified parameter |  | String
|===
// component options: END


// endpoint options: START
The HDFS endpoint is configured using URI syntax:

----
hdfs:hostName:port/path
----

with the following path and query parameters:

=== Path Parameters (3 parameters):


[width="100%",cols="2,5,^1,2",options="header"]
|===
| Name | Description | Default | Type
| *hostName* | *Required* HDFS host to use |  | String
| *port* | HDFS port to use | 8020 | int
| *path* | *Required* The directory path to use |  | String
|===


=== Query Parameters (47 parameters):


[width="100%",cols="2,5,^1,2",options="header"]
|===
| Name | Description | Default | Type
| *connectOnStartup* (common) | Whether to connect to the HDFS file system on starting the producer/consumer. If false then the connection is created on-demand. Notice that HDFS may take up till 15 minutes to establish a connection, as it has hardcoded 45 x 20 sec redelivery. By setting this option to false allows your application to startup, and not block for up till 15 minutes. | true | boolean
| *fileSystemType* (common) | Set to LOCAL to not use HDFS but local java.io.File instead. The value can be one of: LOCAL, HDFS | HDFS | HdfsFileSystemType
| *fileType* (common) | The file type to use. For more details see Hadoop HDFS documentation about the various files types. The value can be one of: NORMAL_FILE, SEQUENCE_FILE, MAP_FILE, BLOOMMAP_FILE, ARRAY_FILE | NORMAL_FILE | HdfsFileType
| *keyType* (common) | The type for the key in case of sequence or map files. The value can be one of: NULL, BOOLEAN, BYTE, INT, FLOAT, LONG, DOUBLE, TEXT, BYTES | NULL | WritableType
| *namedNodes* (common) | A comma separated list of named nodes (e.g. srv11.example.com:8020,srv12.example.com:8020) |  | String
| *owner* (common) | The file owner must match this owner for the consumer to pickup the file. Otherwise the file is skipped. |  | String
| *valueType* (common) | The type for the key in case of sequence or map files. The value can be one of: NULL, BOOLEAN, BYTE, INT, FLOAT, LONG, DOUBLE, TEXT, BYTES | BYTES | WritableType
| *bridgeErrorHandler* (consumer) | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | boolean
| *pattern* (consumer) | The pattern used for scanning the directory | * | String
| *sendEmptyMessageWhenIdle* (consumer) | If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead. | false | boolean
| *streamDownload* (consumer) | Sets the download method to use when not using a local working directory. If set to true, the remote files are streamed to the route as they are read. When set to false, the remote files are loaded into memory before being sent into the route. | false | boolean
| *exceptionHandler* (consumer) | To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored. |  | ExceptionHandler
| *exchangePattern* (consumer) | Sets the exchange pattern when the consumer creates an exchange. The value can be one of: InOnly, InOut, InOptionalOut |  | ExchangePattern
| *pollStrategy* (consumer) | A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel. |  | PollingConsumerPollStrategy
| *append* (producer) | Append to existing file. Notice that not all HDFS file systems support the append option. | false | boolean
| *lazyStartProducer* (producer) | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel's routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | boolean
| *overwrite* (producer) | Whether to overwrite existing files with the same name | true | boolean
| *basicPropertyBinding* (advanced) | Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities | false | boolean
| *blockSize* (advanced) | The size of the HDFS blocks | 67108864 | long
| *bufferSize* (advanced) | The buffer size used by HDFS | 4096 | int
| *checkIdleInterval* (advanced) | How often (time in millis) in to run the idle checker background task. This option is only in use if the splitter strategy is IDLE. | 500 | int
| *chunkSize* (advanced) | When reading a normal file, this is split into chunks producing a message per chunk. | 4096 | int
| *compressionCodec* (advanced) | The compression codec to use. The value can be one of: DEFAULT, GZIP, BZIP2 | DEFAULT | HdfsCompressionCodec
| *compressionType* (advanced) | The compression type to use (is default not in use). The value can be one of: NONE, RECORD, BLOCK | NONE | CompressionType
| *openedSuffix* (advanced) | When a file is opened for reading/writing the file is renamed with this suffix to avoid to read it during the writing phase. | opened | String
| *readSuffix* (advanced) | Once the file has been read is renamed with this suffix to avoid to read it again. | read | String
| *replication* (advanced) | The HDFS replication factor | 3 | short
| *splitStrategy* (advanced) | In the current version of Hadoop opening a file in append mode is disabled since it's not very reliable. So, for the moment, it's only possible to create new files. The Camel HDFS endpoint tries to solve this problem in this way: If the split strategy option has been defined, the hdfs path will be used as a directory and files will be created using the configured UuidGenerator. Every time a splitting condition is met, a new file is created. The splitStrategy option is defined as a string with the following syntax: splitStrategy=ST:value,ST:value,... where ST can be: BYTES a new file is created, and the old is closed when the number of written bytes is more than value MESSAGES a new file is created, and the old is closed when the number of written messages is more than value IDLE a new file is created, and the old is closed when no writing happened in the last value milliseconds |  | String
| *synchronous* (advanced) | Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported). | false | boolean
| *maxMessagesPerPoll* (filter) | To define a maximum messages to gather per poll. By default a limit of 100 is set. Can be used to set a limit of e.g. 1000 to avoid when starting up the server that there are thousands of files. Values can only be greater than 0. Notice: If this option is in use then the limit will be applied on the valid files. For example if you have 100000 files and use maxMessagesPerPoll=500, then only the first 500 files will be picked up. | 100 | int
| *backoffErrorThreshold* (scheduler) | The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in. |  | int
| *backoffIdleThreshold* (scheduler) | The number of subsequent idle polls that should happen before the backoffMultipler should kick-in. |  | int
| *backoffMultiplier* (scheduler) | To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured. |  | int
| *delay* (scheduler) | Milliseconds before the next poll. | 500 | long
| *greedy* (scheduler) | If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages. | false | boolean
| *initialDelay* (scheduler) | Milliseconds before the first poll starts. | 1000 | long
| *repeatCount* (scheduler) | Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever. | 0 | long
| *runLoggingLevel* (scheduler) | The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. The value can be one of: TRACE, DEBUG, INFO, WARN, ERROR, OFF | TRACE | LoggingLevel
| *scheduledExecutorService* (scheduler) | Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool. |  | ScheduledExecutorService
| *scheduler* (scheduler) | To use a cron scheduler from either camel-spring or camel-quartz component. The value can be one of: none, spring, quartz | none | String
| *schedulerProperties* (scheduler) | To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler. |  | Map
| *startScheduler* (scheduler) | Whether the scheduler should be auto started. | true | boolean
| *timeUnit* (scheduler) | Time unit for initialDelay and delay options. The value can be one of: NANOSECONDS, MICROSECONDS, MILLISECONDS, SECONDS, MINUTES, HOURS, DAYS | MILLISECONDS | TimeUnit
| *useFixedDelay* (scheduler) | Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details. | true | boolean
| *kerberosConfigFileLocation* (security) | The location of the kerb5.conf file (\https://web.mit.edu/kerberos/krb5-1.12/doc/admin/conf_files/krb5_conf.html) |  | String
| *kerberosKeytabLocation* (security) | The location of the keytab file used to authenticate with the kerberos nodes (contains pairs of kerberos principals and encrypted keys (which are derived from the Kerberos password)) |  | String
| *kerberosUsername* (security) | The username used to authenticate with the kerberos nodes |  | String
|===
// endpoint options: END


=== KeyType and ValueType

* NULL it means that the key or the value is absent
* BYTE for writing a byte, the java Byte class is mapped into a BYTE
* BYTES for writing a sequence of bytes. It maps the java ByteBuffer
class
* INT for writing java integer
* FLOAT for writing java float
* LONG for writing java long
* DOUBLE for writing java double
* TEXT for writing java strings

BYTES is also used with everything else, for example, in Camel a file is
sent around as an InputStream, int this case is written in a sequence
file or a map file as a sequence of bytes.

== Splitting Strategy

In the current version of Hadoop opening a file in append mode is
disabled since it's not very reliable. So, for the moment, it's only
possible to create new files. The Camel HDFS endpoint tries to solve
this problem in this way:

* If the split strategy option has been defined, the hdfs path will be
used as a directory and files will be created using the configured
UuidGenerator
* Every time a splitting condition is met, a new file is created. +
 The splitStrategy option is defined as a string with the following
syntax: splitStrategy=<ST>:<value>,<ST>:<value>,*

where <ST> can be:

* BYTES a new file is created, and the old is closed when the number of
written bytes is more than <value>
* MESSAGES a new file is created, and the old is closed when the number
of written messages is more than <value>
* IDLE a new file is created, and the old is closed when no writing
happened in the last <value> milliseconds

note that this strategy currently requires either setting an IDLE value
or setting the HdfsConstants.HDFS_CLOSE header to false to use the
BYTES/MESSAGES configuration...otherwise, the file will be closed with
each message

for example:

[source,java]
-----------------------------------------------------------------
hdfs://localhost/tmp/simple-file?splitStrategy=IDLE:1000,BYTES:5
-----------------------------------------------------------------

it means: a new file is created either when it has been idle for more
than 1 second or if more than 5 bytes have been written. So, running
`hadoop fs -ls /tmp/simple-file` you'll see that multiple files have
been created.

== Message Headers

The following headers are supported by this component:

=== Producer only

[width="100%",cols="10%,90%",options="header",]
|=======================================================================
|Header |Description

|`CamelFileName` |Specifies the name of the file to write (relative to the
endpoint path). The name can be a `String` or an
Expression object. Only relevant when not using a
split strategy.
|=======================================================================

== Controlling to close file stream

When using the xref:hdfs-component.adoc[HDFS] producer *without* a split
strategy, then the file output stream is by default closed after the
write. However you may want to keep the stream open, and only explicitly
close the stream later. For that you can use the header
`HdfsConstants.HDFS_CLOSE` (value = `"CamelHdfsClose"`) to control this.
Setting this value to a boolean allows you to explicit control whether
the stream should be closed or not.

Notice this does not apply if you use a split strategy, as there are
various strategies that can control when the stream is closed.

== Using this component in OSGi

There are some quirks when running this component in an OSGi environment
related to the mechanism Hadoop 2.x uses to discover different
`org.apache.hadoop.fs.FileSystem` implementations. Hadoop 2.x uses
`java.util.ServiceLoader` which looks for
`/META-INF/services/org.apache.hadoop.fs.FileSystem` files defining
available filesystem types and implementations. These resources are not
available when running inside OSGi.

As with `camel-hdfs` component, the default configuration files need to
be visible from the bundle class loader. A typical way to deal with it
is to keep a copy of `core-default.xml` (and e.g., `hdfs-default.xml`)
in your bundle root.

=== Using this component with manually defined routes

There are two options:

1.  Package `/META-INF/services/org.apache.hadoop.fs.FileSystem`
resource with bundle that defines the routes. This resource should list
all the required Hadoop 2.x filesystem implementations.
2.  Provide boilerplate initialization code which populates internal,
static cache inside `org.apache.hadoop.fs.FileSystem` class:

[source,java]
----------------------------------------------------------------------------------------------------
org.apache.hadoop.conf.Configuration conf = new org.apache.hadoop.conf.Configuration();
conf.setClass("fs.file.impl", org.apache.hadoop.fs.LocalFileSystem.class, FileSystem.class);
conf.setClass("fs.hdfs.impl", org.apache.hadoop.hdfs.DistributedFileSystem.class, FileSystem.class);
...
FileSystem.get("file:///", conf);
FileSystem.get("hdfs://localhost:9000/", conf);
...
----------------------------------------------------------------------------------------------------

=== Using this component with Blueprint container

Two options:

1.  Package `/META-INF/services/org.apache.hadoop.fs.FileSystem`
resource with bundle that contains blueprint definition.
2.  Add the following to the blueprint definition file:

[source,java]
------------------------------------------------------------------------------------------------------
<bean id="hdfsOsgiHelper" class="org.apache.camel.component.hdfs.HdfsOsgiHelper">
   <argument>
      <map>
         <entry key="file:///" value="org.apache.hadoop.fs.LocalFileSystem"  />
         <entry key="hdfs://localhost:9000/" value="org.apache.hadoop.hdfs.DistributedFileSystem" />
         ...
      </map>
   </argument>
</bean>

<bean id="hdfs" class="org.apache.camel.component.hdfs.HdfsComponent" depends-on="hdfsOsgiHelper" />
------------------------------------------------------------------------------------------------------

This way Hadoop 2.x will have correct mapping of URI schemes to
filesystem implementations.

=== Using this component with a HighAvailability configuration

In a HA setup, there will be multiple nodes (_configured through the *namedNodes* parameter_).
The "hostname" and "port" portion of the endpoint uri will no longer have a _"host"_ meaning, but it will represent the name given to the cluster.

You can choose whatever name you want for the cluster (_the name should follow the [a-zA-Z0-9] convention_).
This name will be sanitized by replacing the _dirty_ characters with underscore. This is done so that a host name or ip could pottentialy be used, if it makes sense to you.

The cluster name will be mapped to the HA filesystem with a coresponding proxy, with failover, and the _works_.

[source,java]
------------------------------------------------------------------------------------------------------

from("hdfs://node1_and_2_cluster/dir1/dir2?namedNodes=node1.exemple.org:8020,node2.exemple.org:8020").routeId(...)
...
------------------------------------------------------------------------------------------------------


=== Using this component with Kerberos authentication

The kerberos config file is read when the camel component is created, not when the endpoint is created.
Because of this, the config file must be set at startup, with a call like:

[source,java]
------------------------------------------------------------------------------------------------------
static {
  HdfsComponent.setKerberosConfigFile("/etc/security/kerb5.conf");
}
------------------------------------------------------------------------------------------------------


include::camel-spring-boot::page$hdfs-starter.adoc[]