[[dataset-component]]
= Dataset Component
//THIS FILE IS COPIED: EDIT THE SOURCE FILE:
:page-source: components/camel-dataset/src/main/docs/dataset-component.adoc
:docTitle: Dataset
:artifactId: camel-dataset
:description: Provide data for load & soak testing of your Camel application.
:since: 1.3
:supportLevel: Stable
:component-header: Both producer and consumer are supported
:core:

*Since Camel {since}*

*{component-header}*

Testing of distributed and asynchronous processing is
notoriously difficult. The xref:mock-component.adoc[Mock], xref:mock-component.adoc[Test]
and xref:dataset-component.adoc[DataSet] endpoints work great with the
Camel Testing Framework to simplify your unit and
integration testing using
xref:{eip-vc}:eips:enterprise-integration-patterns.adoc[Enterprise Integration
Patterns] and Camel's large range of Components
together with the powerful Bean Integration.

The DataSet component provides a mechanism to easily perform load & soak
testing of your system. It works by allowing you to create
https://www.javadoc.io/doc/org.apache.camel/camel-dataset/current/org/apache/camel/component/dataset/DataSet.html[DataSet
instances] both as a source of messages and as a way to assert that the
data set is received.

Camel will use the xref:log-component.adoc[throughput logger] when sending
dataset's.

== URI format

[source]
----
dataset:name[?options]
----

Where *name* is used to find the
https://www.javadoc.io/doc/org.apache.camel/camel-dataset/current/org/apache/camel/component/dataset/DataSet.html[DataSet
instance] in the Registry

Camel ships with a support implementation of
`org.apache.camel.component.dataset.DataSet`, the
`org.apache.camel.component.dataset.DataSetSupport` class, that can be
used as a base for implementing your own DataSet. Camel also ships with
some implementations that can be used for testing:
 `org.apache.camel.component.dataset.SimpleDataSet`, `org.apache.camel.component.dataset.ListDataSet`
and `org.apache.camel.component.dataset.FileDataSet`, all of which
extend `DataSetSupport`.

== Options


// component options: START
The Dataset component supports 3 options, which are listed below.


[width="100%",cols="2,5,^1,2",options="header"]
|===
| Name | Description | Default | Type
| *bridgeErrorHandler* (consumer) | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | boolean
| *lazyStartProducer* (producer) | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel's routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | boolean
| *basicPropertyBinding* (advanced) | Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities | false | boolean
|===
// component options: END


// endpoint options: START
The Dataset endpoint is configured using URI syntax:

----
dataset:name
----

with the following path and query parameters:

=== Path Parameters (1 parameters):


[width="100%",cols="2,5,^1,2",options="header"]
|===
| Name | Description | Default | Type
| *name* | *Required* Name of DataSet to lookup in the registry |  | DataSet
|===


=== Query Parameters (22 parameters):


[width="100%",cols="2,5,^1,2",options="header"]
|===
| Name | Description | Default | Type
| *dataSetIndex* (common) | Controls the behaviour of the CamelDataSetIndex header. For Consumers: - off = the header will not be set - strict/lenient = the header will be set For Producers: - off = the header value will not be verified, and will not be set if it is not present = strict = the header value must be present and will be verified = lenient = the header value will be verified if it is present, and will be set if it is not present. The value can be one of: strict, lenient, off | lenient | String
| *bridgeErrorHandler* (consumer) | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | boolean
| *initialDelay* (consumer) | Time period in millis to wait before starting sending messages. | 1000 | long
| *minRate* (consumer) | Wait until the DataSet contains at least this number of messages | 0 | int
| *preloadSize* (consumer) | Sets how many messages should be preloaded (sent) before the route completes its initialization | 0 | long
| *produceDelay* (consumer) | Allows a delay to be specified which causes a delay when a message is sent by the consumer (to simulate slow processing) | 3 | long
| *exceptionHandler* (consumer) | To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored. |  | ExceptionHandler
| *exchangePattern* (consumer) | Sets the exchange pattern when the consumer creates an exchange. The value can be one of: InOnly, InOut, InOptionalOut |  | ExchangePattern
| *assertPeriod* (producer) | Sets a grace period after which the mock endpoint will re-assert to ensure the preliminary assertion is still valid. This is used for example to assert that exactly a number of messages arrives. For example if expectedMessageCount(int) was set to 5, then the assertion is satisfied when 5 or more message arrives. To ensure that exactly 5 messages arrives, then you would need to wait a little period to ensure no further message arrives. This is what you can use this method for. By default this period is disabled. | 0 | long
| *consumeDelay* (producer) | Allows a delay to be specified which causes a delay when a message is consumed by the producer (to simulate slow processing) | 0 | long
| *expectedCount* (producer) | Specifies the expected number of message exchanges that should be received by this endpoint. Beware: If you want to expect that 0 messages, then take extra care, as 0 matches when the tests starts, so you need to set a assert period time to let the test run for a while to make sure there are still no messages arrived; for that use setAssertPeriod(long). An alternative is to use NotifyBuilder, and use the notifier to know when Camel is done routing some messages, before you call the assertIsSatisfied() method on the mocks. This allows you to not use a fixed assert period, to speedup testing times. If you want to assert that exactly n'th message arrives to this mock endpoint, then see also the setAssertPeriod(long) method for further details. | -1 | int
| *failFast* (producer) | Sets whether assertIsSatisfied() should fail fast at the first detected failed expectation while it may otherwise wait for all expected messages to arrive before performing expectations verifications. Is by default true. Set to false to use behavior as in Camel 2.x. | false | boolean
| *lazyStartProducer* (producer) | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel's routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | boolean
| *reportGroup* (producer) | A number that is used to turn on throughput logging based on groups of the size. |  | int
| *resultMinimumWaitTime* (producer) | Sets the minimum expected amount of time (in millis) the assertIsSatisfied() will wait on a latch until it is satisfied | 0 | long
| *resultWaitTime* (producer) | Sets the maximum amount of time (in millis) the assertIsSatisfied() will wait on a latch until it is satisfied | 0 | long
| *retainFirst* (producer) | Specifies to only retain the first n'th number of received Exchanges. This is used when testing with big data, to reduce memory consumption by not storing copies of every Exchange this mock endpoint receives. Important: When using this limitation, then the getReceivedCounter() will still return the actual number of received Exchanges. For example if we have received 5000 Exchanges, and have configured to only retain the first 10 Exchanges, then the getReceivedCounter() will still return 5000 but there is only the first 10 Exchanges in the getExchanges() and getReceivedExchanges() methods. When using this method, then some of the other expectation methods is not supported, for example the expectedBodiesReceived(Object...) sets a expectation on the first number of bodies received. You can configure both setRetainFirst(int) and setRetainLast(int) methods, to limit both the first and last received. | -1 | int
| *retainLast* (producer) | Specifies to only retain the last n'th number of received Exchanges. This is used when testing with big data, to reduce memory consumption by not storing copies of every Exchange this mock endpoint receives. Important: When using this limitation, then the getReceivedCounter() will still return the actual number of received Exchanges. For example if we have received 5000 Exchanges, and have configured to only retain the last 20 Exchanges, then the getReceivedCounter() will still return 5000 but there is only the last 20 Exchanges in the getExchanges() and getReceivedExchanges() methods. When using this method, then some of the other expectation methods is not supported, for example the expectedBodiesReceived(Object...) sets a expectation on the first number of bodies received. You can configure both setRetainFirst(int) and setRetainLast(int) methods, to limit both the first and last received. | -1 | int
| *sleepForEmptyTest* (producer) | Allows a sleep to be specified to wait to check that this endpoint really is empty when expectedMessageCount(int) is called with zero | 0 | long
| *copyOnExchange* (producer) | Sets whether to make a deep copy of the incoming Exchange when received at this mock endpoint. Is by default true. | true | boolean
| *basicPropertyBinding* (advanced) | Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities | false | boolean
| *synchronous* (advanced) | Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported). | false | boolean
|===
// endpoint options: END

You can append query options to the URI in the following format,
`?option=value&option=value&...`

== Configuring DataSet

Camel will lookup in the Registry for a bean
implementing the DataSet interface. So you can register your own DataSet
as:

[source,xml]
----
<bean id="myDataSet" class="com.mycompany.MyDataSet">
  <property name="size" value="100"/>
</bean>
----

== Example

For example, to test that a set of messages are sent to a queue and then
consumed from the queue without losing any messages:

[source,java]
----
// send the dataset to a queue
from("dataset:foo").to("activemq:SomeQueue");

// now lets test that the messages are consumed correctly
from("activemq:SomeQueue").to("dataset:foo");
----

The above would look in the Registry to find the
*foo* DataSet instance which is used to create the messages.

Then you create a DataSet implementation, such as using the
`SimpleDataSet` as described below, configuring things like how big the
data set is and what the messages look like etc.  
 

== DataSetSupport (abstract class)

The DataSetSupport abstract class is a nice starting point for new
DataSets, and provides some useful features to derived classes.

=== Properties on DataSetSupport

[width="100%",cols="10%,10%,10%,70%",options="header",]
|===
|Property |Type |Default |Description

|`defaultHeaders` |`Map<String,Object>` |`null` |Specifies the default message body. For SimpleDataSet it is a constant
payload; though if you want to create custom payloads per message,
create your own derivation of `DataSetSupport`.

|`outputTransformer` |`org.apache.camel.Processor` |null |

|`size` |`long` |`10` |Specifies how many messages to send/consume.

|`reportCount` |`long` |`-1` |Specifies the number of messages to be received before reporting
progress. Useful for showing progress of a large load test. If < 0, then
`size` / 5, if is 0 then `size`, else set to `reportCount` value.
|===

== SimpleDataSet

The `SimpleDataSet` extends `DataSetSupport`, and adds a default body.

=== Additional Properties on SimpleDataSet

[width="100%",cols="10%,10%,10%,70%",options="header",]
|===
|Property |Type |Default |Description

|`defaultBody` |`Object` |`<hello>world!</hello>` |Specifies the default message body. By default, the `SimpleDataSet`
produces the same constant payload for each exchange. If you want to
customize the payload for each exchange, create a Camel `Processor` and
configure the `SimpleDataSet` to use it by setting the
`outputTransformer` property.
|===

== ListDataSet

*Available since Camel 2.17*

The List`DataSet` extends `DataSetSupport`, and adds a list of default
bodies.

=== Additional Properties on ListDataSet

[width="100%",cols="10%,10%,10%,70%",options="header",]
|===
|Property |Type |Default |Description

|`defaultBodies` |`List<Object>` |`empty LinkedList<Object>` |Specifies the default message body. By default, the `ListDataSet`
selects a constant payload from the list of `defaultBodies` using the
`CamelDataSetIndex`. If you want to customize the payload, create a
Camel `Processor` and configure the `ListDataSet` to use it by setting
the `outputTransformer` property.

|`size` |`long` |the size of the defaultBodies list |Specifies how many messages to send/consume. This value can be different
from the size of the `defaultBodies` list. If the value is less than the
size of the `defaultBodies` list, some of the list elements will not be
used. If the value is greater than the size of the `defaultBodies` list,
the payload for the exchange will be selected using the modulus of the
`CamelDataSetIndex` and the size of the `defaultBodies` list (i.e.
`CamelDataSetIndex % defaultBodies.size()` )
|===

== FileDataSet

*Available since Camel 2.17*

The `FileDataSet` extends `ListDataSet`, and adds support for loading
the bodies from a file.

=== Additional Properties on FileDataSet

[width="100%",cols="10%,10%,10%,70%",options="header",]
|===
|Property |Type |Default |Description

|`sourceFile` |`File` |null |Specifies the source file for payloads

|`delimiter` |`String` |\z |Specifies the delimiter pattern used by a `java.util.Scanner` to split
the file into multiple payloads.
|===

include::camel-spring-boot::page$dataset-starter.adoc[]