[[aws-ddbstream-component]]
= AWS DynamoDB Streams Component
//THIS FILE IS COPIED: EDIT THE SOURCE FILE:
:page-source: components/camel-aws-ddb/src/main/docs/aws-ddbstream-component.adoc
:docTitle: AWS DynamoDB Streams
:artifactId: camel-aws-ddb
:description: Receive messages from AWS DynamoDB Stream service.
:since: 2.17
:supportLevel: Stable
:component-header: Only consumer is supported
//Manually maintained attributes
:group: AWS

*Since Camel {since}*

*{component-header}*

The DynamoDB Stream component supports receiving messages from
Amazon DynamoDB Stream service.

Prerequisites

You must have a valid Amazon Web Services developer account, and be
signed up to use Amazon DynamoDB Streams. More information are available
at https://aws.amazon.com/dynamodb/[AWS DynamoDB]

== URI Format

[source,java]
------------------------------------
aws-ddbstream://table-name[?options]
------------------------------------

The stream needs to be created prior to it being used. +
 You can append query options to the URI in the following format,
?options=value&option2=value&...

== URI Options


// component options: START
The AWS DynamoDB Streams component supports 14 options, which are listed below.


[width="100%",cols="2,5,^1,2",options="header"]
|===
| Name | Description | Default | Type
| *autoDiscoverClient* (common) | Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking | true | boolean
| *amazonDynamoDbStreamsClient* (consumer) | Amazon DynamoDB client to use for all requests for this endpoint |  | AmazonDynamoDBStreams
| *bridgeErrorHandler* (consumer) | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | boolean
| *configuration* (consumer) | The component configuration |  | DdbStreamConfiguration
| *iteratorType* (consumer) | Defines where in the DynaboDB stream to start getting records. Note that using TRIM_HORIZON can cause a significant delay before the stream has caught up to real-time. if {AT,AFTER}_SEQUENCE_NUMBER are used, then a sequenceNumberProvider MUST be supplied. The value can be one of: TRIM_HORIZON, LATEST, AT_SEQUENCE_NUMBER, AFTER_SEQUENCE_NUMBER | LATEST | ShardIteratorType
| *maxResultsPerRequest* (consumer) | Maximum number of records that will be fetched in each poll |  | int
| *proxyHost* (consumer) | To define a proxy host when instantiating the DDBStreams client |  | String
| *proxyPort* (consumer) | To define a proxy port when instantiating the DDBStreams client |  | Integer
| *proxyProtocol* (consumer) | To define a proxy protocol when instantiating the DDBStreams client. The value can be one of: HTTP, HTTPS | HTTPS | Protocol
| *region* (consumer) | The region in which DDBStreams client needs to work |  | String
| *sequenceNumberProvider* (consumer) | Provider for the sequence number when using one of the two ShardIteratorType.{AT,AFTER}_SEQUENCE_NUMBER iterator types. Can be a registry reference or a literal sequence number. |  | SequenceNumberProvider
| *basicPropertyBinding* (advanced) | Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities | false | boolean
| *accessKey* (security) | Amazon AWS Access Key |  | String
| *secretKey* (security) | Amazon AWS Secret Key |  | String
|===
// component options: END


// endpoint options: START
The AWS DynamoDB Streams endpoint is configured using URI syntax:

----
aws-ddbstream:tableName
----

with the following path and query parameters:

=== Path Parameters (1 parameters):


[width="100%",cols="2,5,^1,2",options="header"]
|===
| Name | Description | Default | Type
| *tableName* | *Required* Name of the dynamodb table |  | String
|===


=== Query Parameters (32 parameters):


[width="100%",cols="2,5,^1,2",options="header"]
|===
| Name | Description | Default | Type
| *autoDiscoverClient* (common) | Setting the autoDiscoverClient mechanism, if true, the component will look for a client instance in the registry automatically otherwise it will skip that checking | true | boolean
| *amazonDynamoDbStreamsClient* (consumer) | Amazon DynamoDB client to use for all requests for this endpoint |  | AmazonDynamoDBStreams
| *bridgeErrorHandler* (consumer) | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | boolean
| *iteratorType* (consumer) | Defines where in the DynaboDB stream to start getting records. Note that using TRIM_HORIZON can cause a significant delay before the stream has caught up to real-time. if {AT,AFTER}_SEQUENCE_NUMBER are used, then a sequenceNumberProvider MUST be supplied. The value can be one of: TRIM_HORIZON, LATEST, AT_SEQUENCE_NUMBER, AFTER_SEQUENCE_NUMBER | LATEST | ShardIteratorType
| *maxResultsPerRequest* (consumer) | Maximum number of records that will be fetched in each poll |  | int
| *proxyHost* (consumer) | To define a proxy host when instantiating the DDBStreams client |  | String
| *proxyPort* (consumer) | To define a proxy port when instantiating the DDBStreams client |  | Integer
| *proxyProtocol* (consumer) | To define a proxy protocol when instantiating the DDBStreams client. The value can be one of: HTTP, HTTPS | HTTPS | Protocol
| *region* (consumer) | The region in which DDBStreams client needs to work |  | String
| *sendEmptyMessageWhenIdle* (consumer) | If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead. | false | boolean
| *sequenceNumberProvider* (consumer) | Provider for the sequence number when using one of the two ShardIteratorType.{AT,AFTER}_SEQUENCE_NUMBER iterator types. Can be a registry reference or a literal sequence number. |  | SequenceNumberProvider
| *exceptionHandler* (consumer) | To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored. |  | ExceptionHandler
| *exchangePattern* (consumer) | Sets the exchange pattern when the consumer creates an exchange. The value can be one of: InOnly, InOut, InOptionalOut |  | ExchangePattern
| *pollStrategy* (consumer) | A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel. |  | PollingConsumerPollStrategy
| *basicPropertyBinding* (advanced) | Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities | false | boolean
| *synchronous* (advanced) | Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported). | false | boolean
| *backoffErrorThreshold* (scheduler) | The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in. |  | int
| *backoffIdleThreshold* (scheduler) | The number of subsequent idle polls that should happen before the backoffMultipler should kick-in. |  | int
| *backoffMultiplier* (scheduler) | To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured. |  | int
| *delay* (scheduler) | Milliseconds before the next poll. | 500 | long
| *greedy* (scheduler) | If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages. | false | boolean
| *initialDelay* (scheduler) | Milliseconds before the first poll starts. | 1000 | long
| *repeatCount* (scheduler) | Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever. | 0 | long
| *runLoggingLevel* (scheduler) | The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. The value can be one of: TRACE, DEBUG, INFO, WARN, ERROR, OFF | TRACE | LoggingLevel
| *scheduledExecutorService* (scheduler) | Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool. |  | ScheduledExecutorService
| *scheduler* (scheduler) | To use a cron scheduler from either camel-spring or camel-quartz component. The value can be one of: none, spring, quartz | none | String
| *schedulerProperties* (scheduler) | To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler. |  | Map
| *startScheduler* (scheduler) | Whether the scheduler should be auto started. | true | boolean
| *timeUnit* (scheduler) | Time unit for initialDelay and delay options. The value can be one of: NANOSECONDS, MICROSECONDS, MILLISECONDS, SECONDS, MINUTES, HOURS, DAYS | MILLISECONDS | TimeUnit
| *useFixedDelay* (scheduler) | Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details. | true | boolean
| *accessKey* (security) | Amazon AWS Access Key |  | String
| *secretKey* (security) | Amazon AWS Secret Key |  | String
|===
// endpoint options: END


Required DynampDBStream component options

You have to provide the amazonDynamoDbStreamsClient in the
Registry with proxies and relevant credentials
configured.

== Sequence Numbers

You can provide a literal string as the sequence number or provide a
bean in the registry. An example of using the bean would be to save your
current position in the change feed and restore it on Camel startup.

It is an error to provide a sequence number that is greater than the
largest sequence number in the describe-streams result, as this will
lead to the AWS call returning an HTTP 400.

== Batch Consumer

This component implements the Batch Consumer.

This allows you for instance to know how many messages exists in this
batch and for instance let the Aggregator
aggregate this number of messages.

== Usage

=== AmazonDynamoDBStreamsClient configuration

You will need to create an instance of AmazonDynamoDBStreamsClient and
bind it to the registry

[source,java]
--------------------------------------------------------------------------------------------------------------------
ClientConfiguration clientConfiguration = new ClientConfiguration();
clientConfiguration.setProxyHost("http://myProxyHost");
clientConfiguration.setProxyPort(8080);

Region region = Region.getRegion(Regions.fromName(region));
region.createClient(AmazonDynamoDBStreamsClient.class, null, clientConfiguration);
// the 'null' here is the AWSCredentialsProvider which defaults to an instance of DefaultAWSCredentialsProviderChain

registry.bind("kinesisClient", client);
--------------------------------------------------------------------------------------------------------------------

=== Providing AWS Credentials

It is recommended that the credentials are obtained by using the
http://docs.aws.amazon.com/AWSJavaSDK/latest/javadoc/com/amazonaws/auth/DefaultAWSCredentialsProviderChain.html[DefaultAWSCredentialsProviderChain]
that is the default when creating a new ClientConfiguration instance,
however, a
different http://docs.aws.amazon.com/AWSJavaSDK/latest/javadoc/com/amazonaws/auth/AWSCredentialsProvider.html[AWSCredentialsProvider]
can be specified when calling createClient(...).

== Coping with Downtime

=== AWS DynamoDB Streams outage of less than 24 hours

The consumer will resume from the last seen sequence number (as
implemented
for https://issues.apache.org/jira/browse/CAMEL-9515[CAMEL-9515]), so
you should receive a flood of events in quick succession, as long as the
outage did not also include DynamoDB itself.

=== AWS DynamoDB Streams outage of more than 24 hours

Given that AWS only retain 24 hours worth of changes, you will have
missed change events no matter what mitigations are in place.

== Automatic detection of AmazonDynamoDBStreams client in registry

The component is capable of detecting the presence of an AmazonDynamoDBStreams bean into the registry.
If it's the only instance of that type it will be used as client and you won't have to define it as uri parameter.
This may be really useful for smarter configuration of the endpoint.

== Dependencies

Maven users will need to add the following dependency to their pom.xml.

*pom.xml*

[source,xml]
---------------------------------------
<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-aws</artifactId>
    <version>${camel-version}</version>
</dependency>
---------------------------------------

where `$\{camel-version\}` must be replaced by the actual version of Camel.


include::camel-spring-boot::page$aws-ddb-starter.adoc[]