// spring-boot-auto-configure options: START
:page-partial:
:doctitle: Camel Spring Boot Starter for salesforce

== Spring Boot Auto-Configuration

When using salesforce with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

[source,xml]
----
<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-salesforce-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>
----


The component supports 86 options, which are listed below.


[width="100%",cols="2,5,^1,2",options="header"]
|===
| Name | Description | Default | Type
| *camel.component.salesforce.all-or-none* | Composite API option to indicate to rollback all records if any are not successful. | false | Boolean
| *camel.component.salesforce.apex-method* | APEX method name |  | String
| *camel.component.salesforce.apex-query-params* | Query params for APEX method |  | Map
| *camel.component.salesforce.apex-url* | APEX method URL |  | String
| *camel.component.salesforce.api-version* | Salesforce API version. | 50.0 | String
| *camel.component.salesforce.authentication-type* | Explicit authentication method to be used, one of USERNAME_PASSWORD, REFRESH_TOKEN or JWT. Salesforce component can auto-determine the authentication method to use from the properties set, set this property to eliminate any ambiguity. |  | AuthenticationType
| *camel.component.salesforce.autowired-enabled* | Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. | true | Boolean
| *camel.component.salesforce.backoff-increment* | Backoff interval increment for Streaming connection restart attempts for failures beyond CometD auto-reconnect. The option is a long type. | 1000 | Long
| *camel.component.salesforce.batch-id* | Bulk API Batch ID |  | String
| *camel.component.salesforce.bridge-error-handler* | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | Boolean
| *camel.component.salesforce.client-id* | OAuth Consumer Key of the connected app configured in the Salesforce instance setup. Typically a connected app needs to be configured but one can be provided by installing a package. |  | String
| *camel.component.salesforce.client-secret* | OAuth Consumer Secret of the connected app configured in the Salesforce instance setup. |  | String
| *camel.component.salesforce.composite-method* | Composite (raw) method. |  | String
| *camel.component.salesforce.config* | Global endpoint configuration - use to set values that are common to all endpoints. The option is a org.apache.camel.component.salesforce.SalesforceEndpointConfig type. |  | SalesforceEndpointConfig
| *camel.component.salesforce.content-type* | Bulk API content type, one of XML, CSV, ZIP_XML, ZIP_CSV |  | ContentType
| *camel.component.salesforce.default-replay-id* | Default replayId setting if no value is found in initialReplayIdMap | -1 | Long
| *camel.component.salesforce.enabled* | Whether to enable auto configuration of the salesforce component. This is enabled by default. |  | Boolean
| *camel.component.salesforce.format* | Payload format to use for Salesforce API calls, either JSON or XML, defaults to JSON |  | PayloadFormat
| *camel.component.salesforce.http-client* | Custom Jetty Http Client to use to connect to Salesforce. The option is a org.apache.camel.component.salesforce.SalesforceHttpClient type. |  | SalesforceHttpClient
| *camel.component.salesforce.http-client-connection-timeout* | Connection timeout used by the HttpClient when connecting to the Salesforce server. | 60000 | Long
| *camel.component.salesforce.http-client-idle-timeout* | Timeout used by the HttpClient when waiting for response from the Salesforce server. | 10000 | Long
| *camel.component.salesforce.http-client-properties* | Used to set any properties that can be configured on the underlying HTTP client. Have a look at properties of SalesforceHttpClient and the Jetty HttpClient for all available options. |  | Map
| *camel.component.salesforce.http-max-content-length* | Max content length of an HTTP response. |  | Integer
| *camel.component.salesforce.http-proxy-auth-uri* | Used in authentication against the HTTP proxy server, needs to match the URI of the proxy server in order for the httpProxyUsername and httpProxyPassword to be used for authentication. |  | String
| *camel.component.salesforce.http-proxy-excluded-addresses* | A list of addresses for which HTTP proxy server should not be used. |  | Set
| *camel.component.salesforce.http-proxy-host* | Hostname of the HTTP proxy server to use. |  | String
| *camel.component.salesforce.http-proxy-included-addresses* | A list of addresses for which HTTP proxy server should be used. |  | Set
| *camel.component.salesforce.http-proxy-password* | Password to use to authenticate against the HTTP proxy server. |  | String
| *camel.component.salesforce.http-proxy-port* | Port number of the HTTP proxy server to use. |  | Integer
| *camel.component.salesforce.http-proxy-realm* | Realm of the proxy server, used in preemptive Basic/Digest authentication methods against the HTTP proxy server. |  | String
| *camel.component.salesforce.http-proxy-secure* | If set to false disables the use of TLS when accessing the HTTP proxy. | true | Boolean
| *camel.component.salesforce.http-proxy-socks4* | If set to true the configures the HTTP proxy to use as a SOCKS4 proxy. | false | Boolean
| *camel.component.salesforce.http-proxy-use-digest-auth* | If set to true Digest authentication will be used when authenticating to the HTTP proxy, otherwise Basic authorization method will be used | false | Boolean
| *camel.component.salesforce.http-proxy-username* | Username to use to authenticate against the HTTP proxy server. |  | String
| *camel.component.salesforce.http-request-buffer-size* | HTTP request buffer size. May need to be increased for large SOQL queries. | 8192 | Integer
| *camel.component.salesforce.include-details* | Include details in Salesforce1 Analytics report, defaults to false. |  | Boolean
| *camel.component.salesforce.initial-replay-id-map* | Replay IDs to start from per channel name. |  | Map
| *camel.component.salesforce.instance-id* | Salesforce1 Analytics report execution instance ID |  | String
| *camel.component.salesforce.instance-url* | URL of the Salesforce instance used after authentication, by default received from Salesforce on successful authentication |  | String
| *camel.component.salesforce.job-id* | Bulk API Job ID |  | String
| *camel.component.salesforce.jwt-audience* | Value to use for the Audience claim (aud) when using OAuth JWT flow. If not set, the login URL will be used, which is appropriate in most cases. |  | String
| *camel.component.salesforce.keystore* | KeyStore parameters to use in OAuth JWT flow. The KeyStore should contain only one entry with private key and certificate. Salesforce does not verify the certificate chain, so this can easily be a selfsigned certificate. Make sure that you upload the certificate to the corresponding connected app. The option is a org.apache.camel.support.jsse.KeyStoreParameters type. |  | KeyStoreParameters
| *camel.component.salesforce.lazy-login* | If set to true prevents the component from authenticating to Salesforce with the start of the component. You would generally set this to the (default) false and authenticate early and be immediately aware of any authentication issues. | false | Boolean
| *camel.component.salesforce.lazy-start-producer* | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel's routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | Boolean
| *camel.component.salesforce.limit* | Limit on number of returned records. Applicable to some of the API, check the Salesforce documentation. |  | Integer
| *camel.component.salesforce.login-config* | All authentication configuration in one nested bean, all properties set there can be set directly on the component as well. The option is a org.apache.camel.component.salesforce.SalesforceLoginConfig type. |  | SalesforceLoginConfig
| *camel.component.salesforce.login-url* | URL of the Salesforce instance used for authentication, by default set to \https://login.salesforce.com | https://login.salesforce.com | String
| *camel.component.salesforce.long-polling-transport-properties* | Used to set any properties that can be configured on the LongPollingTransport used by the BayeuxClient (CometD) used by the streaming api |  | Map
| *camel.component.salesforce.max-backoff* | Maximum backoff interval for Streaming connection restart attempts for failures beyond CometD auto-reconnect. The option is a long type. | 30000 | Long
| *camel.component.salesforce.not-found-behaviour* | Sets the behaviour of 404 not found status received from Salesforce API. Should the body be set to NULL NotFoundBehaviour#NULL or should a exception be signaled on the exchange NotFoundBehaviour#EXCEPTION - the default. |  | NotFoundBehaviour
| *camel.component.salesforce.notify-for-fields* | Notify for fields, options are ALL, REFERENCED, SELECT, WHERE |  | NotifyForFieldsEnum
| *camel.component.salesforce.notify-for-operation-create* | Notify for create operation, defaults to false (API version = 29.0) |  | Boolean
| *camel.component.salesforce.notify-for-operation-delete* | Notify for delete operation, defaults to false (API version = 29.0) |  | Boolean
| *camel.component.salesforce.notify-for-operation-undelete* | Notify for un-delete operation, defaults to false (API version = 29.0) |  | Boolean
| *camel.component.salesforce.notify-for-operation-update* | Notify for update operation, defaults to false (API version = 29.0) |  | Boolean
| *camel.component.salesforce.notify-for-operations* | Notify for operations, options are ALL, CREATE, EXTENDED, UPDATE (API version 29.0) |  | NotifyForOperationsEnum
| *camel.component.salesforce.object-mapper* | Custom Jackson ObjectMapper to use when serializing/deserializing Salesforce objects. The option is a com.fasterxml.jackson.databind.ObjectMapper type. |  | ObjectMapper
| *camel.component.salesforce.packages* | In what packages are the generated DTO classes. Typically the classes would be generated using camel-salesforce-maven-plugin. This must be set if using the XML format. Also, set it if using the generated DTOs to gain the benefit of using short SObject names in parameters/header values. Multiple packages can be separated by comma. |  | String
| *camel.component.salesforce.password* | Password used in OAuth flow to gain access to access token. It's easy to get started with password OAuth flow, but in general one should avoid it as it is deemed less secure than other flows. Make sure that you append security token to the end of the password if using one. |  | String
| *camel.component.salesforce.pk-chunking* | Use PK Chunking. Only for use in original Bulk API. Bulk 2.0 API performs PK chunking automatically, if necessary. |  | Boolean
| *camel.component.salesforce.pk-chunking-chunk-size* | Chunk size for use with PK Chunking. If unspecified, salesforce default is 100,000. Maximum size is 250,000. |  | Integer
| *camel.component.salesforce.pk-chunking-parent* | Specifies the parent object when you're enabling PK chunking for queries on sharing objects. The chunks are based on the parent object's records rather than the sharing object's records. For example, when querying on AccountShare, specify Account as the parent object. PK chunking is supported for sharing objects as long as the parent object is supported. |  | String
| *camel.component.salesforce.pk-chunking-start-row* | Specifies the 15-character or 18-character record ID to be used as the lower boundary for the first chunk. Use this parameter to specify a starting ID when restarting a job that failed between batches. |  | String
| *camel.component.salesforce.query-locator* | Query Locator provided by salesforce for use when a query results in more records than can be retrieved in a single call. Use this value in a subsequent call to retrieve additional records. |  | String
| *camel.component.salesforce.raw-http-headers* | Comma separated list of message headers to include as HTTP parameters for Raw operation. |  | String
| *camel.component.salesforce.raw-method* | HTTP method to use for the Raw operation |  | String
| *camel.component.salesforce.raw-path* | The portion of the endpoint URL after the domain name. E.g., '/services/data/v52.0/sobjects/Account/' |  | String
| *camel.component.salesforce.raw-payload* | Use raw payload String for request and response (either JSON or XML depending on format), instead of DTOs, false by default | false | Boolean
| *camel.component.salesforce.raw-query-parameters* | Comma separated list of message headers to include as query parameters for Raw operation. Do not url-encode values as this will be done automatically. |  | String
| *camel.component.salesforce.refresh-token* | Refresh token already obtained in the refresh token OAuth flow. One needs to setup a web application and configure a callback URL to receive the refresh token, or configure using the builtin callback at \https://login.salesforce.com/services/oauth2/success or \https://test.salesforce.com/services/oauth2/success and then retrive the refresh_token from the URL at the end of the flow. Note that in development organizations Salesforce allows hosting the callback web application at localhost. |  | String
| *camel.component.salesforce.report-id* | Salesforce1 Analytics report Id |  | String
| *camel.component.salesforce.report-metadata* | Salesforce1 Analytics report metadata for filtering. The option is a org.apache.camel.component.salesforce.api.dto.analytics.reports.ReportMetadata type. |  | ReportMetadata
| *camel.component.salesforce.result-id* | Bulk API Result ID |  | String
| *camel.component.salesforce.s-object-blob-field-name* | SObject blob field name |  | String
| *camel.component.salesforce.s-object-class* | Fully qualified SObject class name, usually generated using camel-salesforce-maven-plugin |  | String
| *camel.component.salesforce.s-object-fields* | SObject fields to retrieve |  | String
| *camel.component.salesforce.s-object-id* | SObject ID if required by API |  | String
| *camel.component.salesforce.s-object-id-name* | SObject external ID field name |  | String
| *camel.component.salesforce.s-object-id-value* | SObject external ID field value |  | String
| *camel.component.salesforce.s-object-name* | SObject name if required or supported by API |  | String
| *camel.component.salesforce.s-object-query* | Salesforce SOQL query string |  | String
| *camel.component.salesforce.s-object-search* | Salesforce SOSL search string |  | String
| *camel.component.salesforce.ssl-context-parameters* | SSL parameters to use, see SSLContextParameters class for all available options. The option is a org.apache.camel.support.jsse.SSLContextParameters type. |  | SSLContextParameters
| *camel.component.salesforce.update-topic* | Whether to update an existing Push Topic when using the Streaming API, defaults to false | false | Boolean
| *camel.component.salesforce.use-global-ssl-context-parameters* | Enable usage of global SSL context parameters | false | Boolean
| *camel.component.salesforce.user-name* | Username used in OAuth flow to gain access to access token. It's easy to get started with password OAuth flow, but in general one should avoid it as it is deemed less secure than other flows. |  | String
|===
// spring-boot-auto-configure options: END