# ---------------------------------------------------------------------------
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ---------------------------------------------------------------------------

name: knative

on:
  pull_request:
    branches:
      - main
      - "release-*"
    paths-ignore:
      - 'proposals/**'
      - '**.adoc'
      - 'KEYS'
      - 'LICENSE'
      - 'NOTICE'
  push:
    branches:
      - main
      - "release-*"
    paths-ignore:
      - 'proposals/**'
      - '**.adoc'
      - 'KEYS'
      - 'LICENSE'
      - 'NOTICE'

jobs:
  test:
    runs-on: ubuntu-20.04
    steps:
    - name: Checkout code
      uses: actions/checkout@v2
    - name: Cleanup
      run: |
        ls -lart
        echo "Initial status:"
        df -h

        echo "Cleaning up resources:"
        sudo swapoff -a
        sudo rm -f /swapfile
        sudo apt clean
        sudo rm -rf /usr/share/dotnet
        sudo rm -rf /opt/ghc
        sudo rm -rf "/usr/local/share/boost"
        sudo rm -rf "$AGENT_TOOLSDIRECTORY"
        docker rmi $(docker image ls -aq)

        echo "Final status:"
        df -h
    - name: Set up JDK 11
      uses: AdoptOpenJDK/install-jdk@v1
      with:
        version: "11"
    - name: Set Go
      uses: actions/setup-go@v1
      with:
        go-version: 1.13.x
    - name: Kubernetes KinD Cluster
      uses: container-tools/kind-action@v1
      with:
        node_image: kindest/node:v1.20.2
    - name: Info
      run: |
        kubectl version
        kubectl cluster-info
        kubectl describe nodes
    - name: Install Knative
      run: |
        # Prerequisites
        sudo pip install yq

        export SERVING_VERSION=v0.16.0
        export EVENTING_VERSION=v0.16.2
        export SOURCES_VERSION=v0.16.0

        # Serving
        kubectl apply --filename https://github.com/knative/serving/releases/download/$SERVING_VERSION/serving-crds.yaml
        curl -L -s https://github.com/knative/serving/releases/download/$SERVING_VERSION/serving-core.yaml | yq 'del(.spec.template.spec.containers[]?.resources)' -y | kubectl apply -f -

        # Kourier
        kubectl apply --filename https://github.com/knative/net-kourier/releases/download/$SERVING_VERSION/kourier.yaml
        kubectl patch configmap/config-network \
        --namespace knative-serving \
        --type merge \
        --patch '{"data":{"ingress.class":"kourier.ingress.networking.knative.dev"}}'

        # Eventing
        kubectl apply --filename https://github.com/knative/eventing/releases/download/$EVENTING_VERSION/eventing-crds.yaml
        curl -L -s https://github.com/knative/eventing/releases/download/$EVENTING_VERSION/eventing-core.yaml | yq 'del(.spec.template.spec.containers[]?.resources)' -y | kubectl apply -f -

        # Eventing channels
        curl -L -s https://github.com/knative/eventing/releases/download/$EVENTING_VERSION/in-memory-channel.yaml | yq 'del(.spec.template.spec.containers[]?.resources)' -y | kubectl apply -f -

        # Eventing broker
        curl -L -s https://github.com/knative/eventing/releases/download/$EVENTING_VERSION/mt-channel-broker.yaml | yq 'del(.spec.template.spec.containers[]?.resources)' -y | kubectl apply -f -

        # Eventing sugar controller for injection
        kubectl apply -f https://github.com/knative/eventing/releases/download/$EVENTING_VERSION/eventing-sugar-controller.yaml

        # Camel Sources
        kubectl apply --filename https://github.com/knative/eventing-contrib/releases/download/$SOURCES_VERSION/camel.yaml

        # Wait for installation completed
        echo "Waiting for all pods to be ready in kourier-system"
        kubectl wait --for=condition=Ready pod --all -n kourier-system --timeout=60s
        echo "Waiting for all pods to be ready in knative-serving"
        kubectl wait --for=condition=Ready pod --all -n knative-serving --timeout=60s
        echo "Waiting for all pods to be ready in knative-eventing"
        kubectl wait --for=condition=Ready pod --all -n knative-eventing --timeout=60s
        echo "Waiting for all pods to be ready in knative-sources"
        kubectl wait --for=condition=Ready pod --all -n knative-sources --timeout=60s

    - name: Build Operator
      run: |
        echo "Build project"
        make build-kamel bundle-kamelets
        echo "Adding maven artifacts to the image context"
        make PACKAGE_ARTIFACTS_STRATEGY=download package-artifacts
        echo "Copying binary file to docker dir"
        mkdir -p ./build/_output/bin
        cp ./kamel ./build/_output/bin/
        echo "Building the images"
        export LOCAL_IMAGE=$KIND_REGISTRY/apache/camel-k:$(make get-version)
        docker build -t "${LOCAL_IMAGE}" -f build/Dockerfile .
        docker push ${LOCAL_IMAGE}

        sudo mv ./kamel /usr/local/bin
    - name: Run IT
      run: |
        echo "Installing camel k cluster resources"
        kamel install --cluster-setup

        # Configure install options
        export KAMEL_INSTALL_BUILD_PUBLISH_STRATEGY=Spectrum
        export KAMEL_INSTALL_MAVEN_REPOSITORIES=$(make get-staging-repo)
        export KAMEL_INSTALL_REGISTRY=$KIND_REGISTRY
        export KAMEL_INSTALL_REGISTRY_INSECURE=true
        export KAMEL_INSTALL_OPERATOR_IMAGE=$KIND_REGISTRY/apache/camel-k:$(make get-version)

        # Configure test options
        export CAMEL_K_TEST_IMAGE_NAME=$KIND_REGISTRY/apache/camel-k
        export CAMEL_K_TEST_IMAGE_VERSION=$(make get-version)

        # Then run integration tests
        make test-knative

  yaks:
    runs-on: ubuntu-20.04
    steps:
      - name: Checkout code
        uses: actions/checkout@v2
      - name: Cleanup
        run: |
          ls -lart
          echo "Initial status:"
          df -h

          echo "Cleaning up resources:"
          sudo swapoff -a
          sudo rm -f /swapfile
          sudo apt clean
          sudo rm -rf /usr/share/dotnet
          sudo rm -rf /opt/ghc
          sudo rm -rf "/usr/local/share/boost"
          sudo rm -rf "$AGENT_TOOLSDIRECTORY"
          docker rmi $(docker image ls -aq)

          echo "Final status:"
          df -h
      - name: Set up JDK 11
        uses: AdoptOpenJDK/install-jdk@v1
        with:
          version: "11"
      - name: Set Go
        uses: actions/setup-go@v1
        with:
          go-version: 1.13.x
      - name: Get YAKS
        run: |
          export YAKS_VERSION=0.4.0-202104120032
          curl --fail -L https://github.com/citrusframework/yaks/releases/download/${YAKS_VERSION}/yaks-${YAKS_VERSION}-linux-64bit.tar.gz -o yaks.tar.gz
          tar -zxf yaks.tar.gz
          sudo mv yaks /usr/local/bin/
      - name: Kubernetes KinD Cluster
        uses: container-tools/kind-action@v1
        with:
          node_image: kindest/node:v1.20.2
      - name: Info
        run: |
          kubectl version
          kubectl cluster-info
          kubectl describe nodes
      - name: Install YAKS
        run: |
          yaks install --cluster-setup
      - name: Install Knative
        run: |
          # Prerequisites
          sudo pip install yq

          export SERVING_VERSION=v0.16.0
          export EVENTING_VERSION=v0.16.2
          export SOURCES_VERSION=v0.16.0

          # Serving
          kubectl apply --filename https://github.com/knative/serving/releases/download/$SERVING_VERSION/serving-crds.yaml
          curl -L -s https://github.com/knative/serving/releases/download/$SERVING_VERSION/serving-core.yaml | yq 'del(.spec.template.spec.containers[]?.resources)' -y | kubectl apply -f -

          # Kourier
          kubectl apply --filename https://github.com/knative/net-kourier/releases/download/$SERVING_VERSION/kourier.yaml
          kubectl patch configmap/config-network \
          --namespace knative-serving \
          --type merge \
          --patch '{"data":{"ingress.class":"kourier.ingress.networking.knative.dev"}}'

          # Eventing
          kubectl apply --filename https://github.com/knative/eventing/releases/download/$EVENTING_VERSION/eventing-crds.yaml
          curl -L -s https://github.com/knative/eventing/releases/download/$EVENTING_VERSION/eventing-core.yaml | yq 'del(.spec.template.spec.containers[]?.resources)' -y | kubectl apply -f -

          # Eventing channels
          curl -L -s https://github.com/knative/eventing/releases/download/$EVENTING_VERSION/in-memory-channel.yaml | yq 'del(.spec.template.spec.containers[]?.resources)' -y | kubectl apply -f -

          # Eventing broker
          curl -L -s https://github.com/knative/eventing/releases/download/$EVENTING_VERSION/mt-channel-broker.yaml | yq 'del(.spec.template.spec.containers[]?.resources)' -y | kubectl apply -f -

          # Eventing sugar controller for injection
          kubectl apply -f https://github.com/knative/eventing/releases/download/$EVENTING_VERSION/eventing-sugar-controller.yaml

          # Camel Sources
          kubectl apply --filename https://github.com/knative/eventing-contrib/releases/download/$SOURCES_VERSION/camel.yaml

          # Wait for installation completed
          echo "Waiting for all pods to be ready in kourier-system"
          kubectl wait --for=condition=Ready pod --all -n kourier-system --timeout=60s
          echo "Waiting for all pods to be ready in knative-serving"
          kubectl wait --for=condition=Ready pod --all -n knative-serving --timeout=60s
          echo "Waiting for all pods to be ready in knative-eventing"
          kubectl wait --for=condition=Ready pod --all -n knative-eventing --timeout=60s
          echo "Waiting for all pods to be ready in knative-sources"
          kubectl wait --for=condition=Ready pod --all -n knative-sources --timeout=60s

      - name: Build Operator
        run: |
          echo "Build project"
          make build-kamel bundle-kamelets
          echo "Adding maven artifacts to the image context"
          make PACKAGE_ARTIFACTS_STRATEGY=download package-artifacts
          echo "Copying binary file to docker dir"
          mkdir -p ./build/_output/bin
          cp ./kamel ./build/_output/bin/
          echo "Building the images"
          export LOCAL_IMAGE=$KIND_REGISTRY/apache/camel-k:$(make get-version)
          docker build -t "${LOCAL_IMAGE}" -f build/Dockerfile .
          docker push ${LOCAL_IMAGE}

          sudo mv ./kamel /usr/local/bin
      - name: Run IT
        run: |
          echo "Installing camel k cluster resources"
          kamel install --cluster-setup

          # Configure install options
          export KAMEL_INSTALL_BUILD_PUBLISH_STRATEGY=Spectrum
          export KAMEL_INSTALL_MAVEN_REPOSITORIES=$(make get-staging-repo)
          export KAMEL_INSTALL_REGISTRY=$KIND_REGISTRY
          export KAMEL_INSTALL_REGISTRY_INSECURE=true
          export KAMEL_INSTALL_OPERATOR_IMAGE=$KIND_REGISTRY/apache/camel-k:$(make get-version)

          # Configure test options
          export CAMEL_K_TEST_IMAGE_NAME=$KIND_REGISTRY/apache/camel-k
          export CAMEL_K_TEST_IMAGE_VERSION=$(make get-version)

          # Install Yaks globally
          yaks install

          # Then run integration tests
          yaks test e2e/yaks/common