import os

import pytest

from buildstream import _yaml
from buildstream._exceptions import ErrorDomain, LoadErrorReason

from tests.testutils import cli, create_element_size


DATA_DIR = os.path.join(
    os.path.dirname(os.path.realpath(__file__)),
    "expiry"
)


# Ensure that the cache successfully removes an old artifact if we do
# not have enough space left.
@pytest.mark.datafiles(DATA_DIR)
def test_artifact_expires(cli, datafiles, tmpdir):
    project = os.path.join(datafiles.dirname, datafiles.basename)
    element_path = 'elements'
    cache_location = os.path.join(project, 'cache', 'artifacts', 'ostree')
    checkout = os.path.join(project, 'checkout')

    cli.configure({
        'cache': {
            'quota': 10000000,
        }
    })

    # Create an element that uses almost the entire cache (an empty
    # ostree cache starts at about ~10KiB, so we need a bit of a
    # buffer)
    create_element_size('target.bst', project, element_path, [], 6000000)
    res = cli.run(project=project, args=['build', 'target.bst'])
    res.assert_success()

    assert cli.get_element_state(project, 'target.bst') == 'cached'

    # Our cache should now be almost full. Let's create another
    # artifact and see if we can cause buildstream to delete the old
    # one.
    create_element_size('target2.bst', project, element_path, [], 6000000)
    res = cli.run(project=project, args=['build', 'target2.bst'])
    res.assert_success()

    # Check that the correct element remains in the cache
    assert cli.get_element_state(project, 'target.bst') != 'cached'
    assert cli.get_element_state(project, 'target2.bst') == 'cached'


# Ensure that we don't end up deleting the whole cache (or worse) if
# we try to store an artifact that is too large to fit in the quota.
@pytest.mark.parametrize('size', [
    # Test an artifact that is obviously too large
    (500000),
    # Test an artifact that might be too large due to slight overhead
    # of storing stuff in ostree
    (399999)
])
@pytest.mark.datafiles(DATA_DIR)
def test_artifact_too_large(cli, datafiles, tmpdir, size):
    project = os.path.join(datafiles.dirname, datafiles.basename)
    element_path = 'elements'

    cli.configure({
        'cache': {
            'quota': 400000
        }
    })

    # Create an element whose artifact is too large
    create_element_size('target.bst', project, element_path, [], size)
    res = cli.run(project=project, args=['build', 'target.bst'])
    res.assert_main_error(ErrorDomain.STREAM, None)


@pytest.mark.datafiles(DATA_DIR)
def test_expiry_order(cli, datafiles, tmpdir):
    project = os.path.join(datafiles.dirname, datafiles.basename)
    element_path = 'elements'
    cache_location = os.path.join(project, 'cache', 'artifacts', 'ostree')
    checkout = os.path.join(project, 'workspace')

    cli.configure({
        'cache': {
            'quota': 9000000
        }
    })

    # Create an artifact
    create_element_size('dep.bst', project, element_path, [], 2000000)
    res = cli.run(project=project, args=['build', 'dep.bst'])
    res.assert_success()

    # Create another artifact
    create_element_size('unrelated.bst', project, element_path, [], 2000000)
    res = cli.run(project=project, args=['build', 'unrelated.bst'])
    res.assert_success()

    # And build something else
    create_element_size('target.bst', project, element_path, [], 2000000)
    res = cli.run(project=project, args=['build', 'target.bst'])
    res.assert_success()

    create_element_size('target2.bst', project, element_path, [], 2000000)
    res = cli.run(project=project, args=['build', 'target2.bst'])
    res.assert_success()

    # Now extract dep.bst
    res = cli.run(project=project, args=['checkout', 'dep.bst', checkout])
    res.assert_success()

    # Finally, build something that will cause the cache to overflow
    create_element_size('expire.bst', project, element_path, [], 2000000)
    res = cli.run(project=project, args=['build', 'expire.bst'])
    res.assert_success()

    # While dep.bst was the first element to be created, it should not
    # have been removed.
    # Note that buildstream will reduce the cache to 50% of the
    # original size - we therefore remove multiple elements.

    assert (tuple(cli.get_element_state(project, element) for element in
                  ('unrelated.bst', 'target.bst', 'target2.bst', 'dep.bst', 'expire.bst')) ==
            ('buildable', 'buildable', 'buildable', 'cached', 'cached', ))


# Ensure that we don't accidentally remove an artifact from something
# in the current build pipeline, because that would be embarassing,
# wouldn't it?
@pytest.mark.datafiles(DATA_DIR)
def test_keep_dependencies(cli, datafiles, tmpdir):
    project = os.path.join(datafiles.dirname, datafiles.basename)
    element_path = 'elements'
    cache_location = os.path.join(project, 'cache', 'artifacts', 'ostree')

    cli.configure({
        'cache': {
            'quota': 10000000
        }
    })

    # Create a pretty big dependency
    create_element_size('dependency.bst', project, element_path, [], 5000000)
    res = cli.run(project=project, args=['build', 'dependency.bst'])
    res.assert_success()

    # Now create some other unrelated artifact
    create_element_size('unrelated.bst', project, element_path, [], 4000000)
    res = cli.run(project=project, args=['build', 'unrelated.bst'])
    res.assert_success()

    # Check that the correct element remains in the cache
    assert cli.get_element_state(project, 'dependency.bst') == 'cached'
    assert cli.get_element_state(project, 'unrelated.bst') == 'cached'

    # We try to build an element which depends on the LRU artifact,
    # and could therefore fail if we didn't make sure dependencies
    # aren't removed.
    #
    # Since some artifact caches may implement weak cache keys by
    # duplicating artifacts (bad!) we need to make this equal in size
    # or smaller than half the size of its dependencies.
    #
    create_element_size('target.bst', project,
                        element_path, ['dependency.bst'], 2000000)
    res = cli.run(project=project, args=['build', 'target.bst'])
    res.assert_success()

    assert cli.get_element_state(project, 'unrelated.bst') != 'cached'
    assert cli.get_element_state(project, 'dependency.bst') == 'cached'
    assert cli.get_element_state(project, 'target.bst') == 'cached'


# Assert that we never delete a dependency required for a build tree
@pytest.mark.datafiles(DATA_DIR)
def test_never_delete_dependencies(cli, datafiles, tmpdir):
    project = os.path.join(datafiles.dirname, datafiles.basename)
    element_path = 'elements'

    cli.configure({
        'cache': {
            'quota': 10000000
        }
    })

    # Create a build tree
    create_element_size('dependency.bst', project,
                        element_path, [], 8000000)
    create_element_size('related.bst', project,
                        element_path, ['dependency.bst'], 8000000)
    create_element_size('target.bst', project,
                        element_path, ['related.bst'], 8000000)
    create_element_size('target2.bst', project,
                        element_path, ['target.bst'], 8000000)

    # We try to build this pipeline, but it's too big for the
    # cache. Since all elements are required, the build should fail.
    res = cli.run(project=project, args=['build', 'target2.bst'])
    res.assert_main_error(ErrorDomain.STREAM, None)

    assert cli.get_element_state(project, 'dependency.bst') == 'cached'

    # This is *technically* above the cache limit. BuildStream accepts
    # some fuzziness, since it's hard to assert that we don't create
    # an artifact larger than the cache quota. We would have to remove
    # the artifact after-the-fact, but since it is required for the
    # current build and nothing broke yet, it's nicer to keep it
    # around.
    #
    # This scenario is quite unlikely, and the cache overflow will be
    # resolved if the user does something about it anyway.
    #
    assert cli.get_element_state(project, 'related.bst') == 'cached'

    assert cli.get_element_state(project, 'target.bst') != 'cached'
    assert cli.get_element_state(project, 'target2.bst') != 'cached'


# Ensure that only valid cache quotas make it through the loading
# process.
@pytest.mark.parametrize("quota,success", [
    ("1", True),
    ("1K", True),
    ("50%", True),
    ("infinity", True),
    ("0", True),
    ("-1", False),
    ("pony", False),
    ("200%", False)
])
@pytest.mark.datafiles(DATA_DIR)
def test_invalid_cache_quota(cli, datafiles, tmpdir, quota, success):
    project = os.path.join(datafiles.dirname, datafiles.basename)
    os.makedirs(os.path.join(project, 'elements'))

    cli.configure({
        'cache': {
            'quota': quota,
        }
    })

    res = cli.run(project=project, args=['workspace', 'list'])
    if success:
        res.assert_success()
    else:
        res.assert_main_error(ErrorDomain.LOAD, LoadErrorReason.INVALID_DATA)