#/**
# * Licensed to the Apache Software Foundation (ASF) under one
# * or more contributor license agreements.  See the NOTICE file
# * distributed with this work for additional information
# * regarding copyright ownership.  The ASF licenses this file
# * to you under the Apache License, Version 2.0 (the
# * "License"); you may not use this file except in compliance
# * with the License.  You may obtain a copy of the License at
# *
# *     http://www.apache.org/licenses/LICENSE-2.0
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# */

# The bookie server configuration are organized in sections
#
# - `Bookie Server`     : bookie server generic settings, including network related settings.
# - `Bookie Storage`    : bookie storage related settings, such as journal, entrylogger, gc and ledger storages.
# - `Security`          : security related settings
# - `Metadata Services` : metadata service related settings
# - `Stats Providers`   : stats providers related settings
# - `Auto Recovery`     : auto recovery related settings
#

############################################## Bookie Server ##############################################


#############################################################################
## Server parameters
#############################################################################

# Unique ID for the bookie, if it is not set if will be computed from the network address
# of the Bookie.
#bookieId=

# The port that the bookie server listens on.
bookiePort=3181

# Configure the bookie to allow/disallow multiple ledger/index/journal directories
# in the same filesystem disk partition
# allowMultipleDirsUnderSameDiskPartition=false

# Set the network interface that the bookie should listen on.
# If not set, the bookie will listen on all interfaces.
# listeningInterface=eth0

# Configure a specific hostname or IP address that the bookie should use to advertise itself to
# clients. If not set, bookie will advertised its own IP address or hostname, depending on the
# listeningInterface and useHostNameAsBookieID settings.
# advertisedAddress=

# Whether the bookie allowed to use a loopback interface as its primary
# interface(i.e. the interface it uses to establish its identity)?
# By default, loopback interfaces are not allowed as the primary
# interface.
# Using a loopback interface as the primary interface usually indicates
# a configuration error. For example, its fairly common in some VPS setups
# to not configure a hostname, or to have the hostname resolve to
# 127.0.0.1. If this is the case, then all bookies in the cluster will
# establish their identities as 127.0.0.1:3181, and only one will be able
# to join the cluster. For VPSs configured like this, you should explicitly
# set the listening interface.
# allowLoopback=false

# Whether the bookie should use its hostname to register with the
# co-ordination service(eg: Zookeeper service).
# When false, bookie will use its ipaddress for the registration.
# Defaults to false.
# useHostNameAsBookieID=false

# If bookie is using hostname for registration and in ledger metadata then
# whether to use short hostname or FQDN hostname. Defaults to false.
# useShortHostName=false

# Whether the bookie is allowed to use an ephemeral port (port 0) as its
# server port. By default, an ephemeral port is not allowed.
# Using an ephemeral port as the service port usually indicates a configuration
# error. However, in unit tests, using an ephemeral port will address port
# conflict problems and allow running tests in parallel.
# allowEphemeralPorts=false

# Whether allow the bookie to listen for BookKeeper clients executed on the local JVM.
# enableLocalTransport=false

# Whether allow the bookie to disable bind on network interfaces,
# this bookie will be available only to BookKeeper clients executed on the local JVM.
# disableServerSocketBind=false

# Interval to watch whether bookie is dead or not, in milliseconds
# bookieDeathWatchInterval=1000

# Configure a list of server components to enable and load on a bookie server.
# This provides the plugin run extra services along with a bookie server.
#
# NOTE: if bookie fails to load any of extra components configured below, bookie will continue
#       function by ignoring the components configured below.
# extraServerComponents=org.apache.bookkeeper.stream.server.StreamStorageLifecycleComponent
extraServerComponents=

# Whether the bookie should ignore startup failures on loading server components specified
# by `extraServerComponents`. The default value is `false`.
#
# ignoreExtraServerComponentsStartupFailures=false

#############################################################################
## Thread settings
#############################################################################

# Number of threads that should handle write requests. if zero, the writes would
# be handled by netty threads directly.
# numAddWorkerThreads=1

# Number of threads that should handle read requests. if zero, the reads would
# be handled by netty threads directly.
# numReadWorkerThreads=8

# The number of threads that should handle long poll requests.
# numLongPollWorkerThreads=0

# The number of threads used for handling journal callback. If a zero or negative number is provided,
# the callbacks are executed directly at force write threads.
# numJournalCallbackThreads=1

# Number of threads that should be used for high priority requests
# (i.e. recovery reads and adds, and fencing).
# numHighPriorityWorkerThreads=8

# If read workers threads are enabled, limit the number of pending requests, to
# avoid the executor queue to grow indefinitely
# maxPendingReadRequestsPerThread=10000

# If add workers threads are enabled, limit the number of pending requests, to
# avoid the executor queue to grow indefinitely
# maxPendingAddRequestsPerThread=10000

# Use auto-throttling of the read-worker threads. This is done
# to ensure the bookie is not using unlimited amount of memory
# to respond to read-requests.
# readWorkerThreadsThrottlingEnabled=true

# Option to enable busy-wait settings. Default is false.
# WARNING: This option will enable spin-waiting on executors and IO threads in order to reduce latency during
# context switches. The spinning will consume 100% CPU even when bookie is not doing any work. It is recommended to
# reduce the number of threads in the main workers pool and Netty event loop to only have few CPU cores busy.
# enableBusyWait=false

#############################################################################
## Long poll request parameter settings
#############################################################################

# The tick duration in milliseconds for long poll requests.
# requestTimerTickDurationMs=10

# The number of ticks per wheel for the long poll request timer.
# requestTimerNumTicks=1024

#############################################################################
## Read-only mode support
#############################################################################

# If all ledger directories configured are full, then support only read requests for clients.
# If "readOnlyModeEnabled=true" then on all ledger disks full, bookie will be converted
# to read-only mode and serve only read requests. Otherwise the bookie will be shutdown.
# By default this will be disabled.
# readOnlyModeEnabled=true

# Whether the bookie is force started in read only mode or not
# forceReadOnlyBookie=false

# Persiste the bookie status locally on the disks. So the bookies can keep their status upon restarts
# @Since 4.6
# persistBookieStatusEnabled=false

#############################################################################
## Netty server settings
#############################################################################

# This settings is used to enabled/disabled Nagle's algorithm, which is a means of
# improving the efficiency of TCP/IP networks by reducing the number of packets
# that need to be sent over the network.
# If you are sending many small messages, such that more than one can fit in
# a single IP packet, setting server.tcpnodelay to false to enable Nagle algorithm
# can provide better performance.
# Default value is true.
# serverTcpNoDelay=true

# This setting is used to send keep-alive messages on connection-oriented sockets.
# serverSockKeepalive=true

# The socket linger timeout on close.
# When enabled, a close or shutdown will not return until all queued messages for
# the socket have been successfully sent or the linger timeout has been reached.
# Otherwise, the call returns immediately and the closing is done in the background.
# serverTcpLinger=0

# The Recv ByteBuf allocator initial buf size.
# byteBufAllocatorSizeInitial=65536

# The Recv ByteBuf allocator min buf size.
# byteBufAllocatorSizeMin=65536

# The Recv ByteBuf allocator max buf size.
# byteBufAllocatorSizeMax=1048576

# The maximum netty frame size in bytes. Any message received larger than this will be rejeted. Default value is 5MB.
# nettyMaxFrameSizeBytes=5242880

#############################################################################
##  server settings
#############################################################################

# The flag enables/disables starting the admin http server. Default value is 'false'.
httpServerEnabled=false

# The http server port to listen on. Default value is 8080.
httpServerPort=8080

# The http server class
httpServerClass=org.apache.bookkeeper.http.vertx.VertxHttpServer

############################################## Security ##############################################

# The bookie authentication provider factory class name.
# If this is null, no authentication will take place.
# bookieAuthProviderFactoryClass=null

# The list of users are permitted to run the bookie process. any users can run the bookie process if it is not set.
#
# Example settings:
#   permittedStartupUsers=user1,user2,user3
#
# permittedStartupUsers=

# Certificate role based authorization for Bookie
# To enable this option, bookieAuthProviderFactoryClass should be set to org.apache.bookkeeper.tls.BookieAuthZFactory
# comma separated values of roles from the certificates OU field which we want to authorize for access
#
# authorizedRoles=

#############################################################################
## TLS settings
#############################################################################

# TLS Provider (JDK or OpenSSL).
# tlsProvider=OpenSSL

# The path to the class that provides security.
# tlsProviderFactoryClass=org.apache.bookkeeper.tls.TLSContextFactory

# Type of security used by server.
# tlsClientAuthentication=true

# Bookie Keystore type.
# tlsKeyStoreType=JKS

# Bookie Keystore location (path).
# tlsKeyStore=null

# Bookie Keystore password path, if the keystore is protected by a password.
# tlsKeyStorePasswordPath=null

# Bookie Truststore type.
# tlsTrustStoreType=null

# Bookie Truststore location (path).
# tlsTrustStore=null

# Bookie Truststore password path, if the trust store is protected by a password.
# tlsTrustStorePasswordPath=null

# Tls certificate files refresh duration in seconds.
# tlsCertFilesRefreshDurationSeconds=0

############################################## Bookie Storage ##############################################


#############################################################################
## Journal settings
#############################################################################

# Directories BookKeeper outputs its write ahead log.
# Could define multi directories to store write head logs, separated by ','.
# For example:
#   journalDirectories=/tmp/bk-journal1,/tmp/bk-journal2
# If journalDirectories is set, bookies will skip journalDirectory and use
# this setting directory.
journalDirectories=/tmp/bk-txn

# Directory Bookkeeper outputs its write ahead log
# @deprecated since 4.5.0. journalDirectories is preferred over journalDirectory.
# journalDirectory=/tmp/bk-txn

# The journal format version to write.
# Available formats are 1-6:
# 1: no header
# 2: a header section was added
# 3: ledger key was introduced
# 4: fencing key was introduced
# 5: expanding header to 512 and padding writes to align sector size configured by `journalAlignmentSize`
# 6: persisting explicitLac is introduced
# By default, it is `6`.
# If you'd like to disable persisting ExplicitLac, you can set this config to < `6` and also
# fileInfoFormatVersionToWrite should be set to 0. If there is mismatch then the serverconfig is considered invalid.
# You can disable `padding-writes` by setting journal version back to `4`. This feature is available in 4.5.0
# and onward versions.
# journalFormatVersionToWrite=6

# Max file size of journal file, in mega bytes
# A new journal file will be created when the old one reaches the file size limitation
# journalMaxSizeMB=2048

# Max number of old journal file to kept
# Keep a number of old journal files would help data recovery in specia case
# journalMaxBackups=5

# How much space should we pre-allocate at a time in the journal.
# journalPreAllocSizeMB=16

# Size of the write buffers used for the journal
# journalWriteBufferSizeKB=64

# Should we remove pages from page cache after force write
# journalRemoveFromPageCache=true

# Should the data be fsynced on journal before acknowledgment.
# By default, data sync is enabled to guarantee durability of writes.
# Beware: while disabling data sync in the Bookie journal might improve the bookie write performance, it will also
# introduce the possibility of data loss. With no sync, the journal entries are written in the OS page cache but
# not flushed to disk. In case of power failure, the affected bookie might lose the unflushed data. If the ledger
# is replicated to multiple bookies, the chances of data loss are reduced though still present.
# journalSyncData=true

# Should we group journal force writes, which optimize group commit
# for higher throughput
# journalAdaptiveGroupWrites=true

# Maximum latency to impose on a journal write to achieve grouping
# journalMaxGroupWaitMSec=2

# Maximum writes to buffer to achieve grouping
# journalBufferedWritesThreshold=524288

# All the journal writes and commits should be aligned to given size.
# If not, zeros will be padded to align to given size.
# It only takes effects when journalFormatVersionToWrite is set to 5
# journalAlignmentSize=512

# Maximum entries to buffer to impose on a journal write to achieve grouping.
# journalBufferedEntriesThreshold=0

# If we should flush the journal when journal queue is empty
# journalFlushWhenQueueEmpty=false

# Set the size of the journal queue.
# journalQueueSize=10000

# Set PageCache flush interval (millisecond) when journalSyncData disabled
# journalPageCacheFlushIntervalMSec = 1000

#############################################################################
## Ledger storage settings
#############################################################################

# Ledger storage implementation class
#
# Options:
#   - org.apache.bookkeeper.bookie.InterleavedLedgerStorage
#   - org.apache.bookkeeper.bookie.SortedLedgerStorage
#   - org.apache.bookkeeper.bookie.storage.ldb.DbLedgerStorage
# Default value:
#   org.apache.bookkeeper.bookie.SortedLedgerStorage
#
# ledgerStorageClass=org.apache.bookkeeper.bookie.SortedLedgerStorage

# @Deprecated - `sortedLedgerStorageEnabled` is deprecated in favor of using `ledgerStorageClass`
# Whether sorted-ledger storage enabled (default true)
# sortedLedgerStorageEnabled=ture

# Directory Bookkeeper outputs ledger snapshots
# could define multi directories to store snapshots, separated by ','
# For example:
# ledgerDirectories=/tmp/bk1-data,/tmp/bk2-data
#
# Ideally ledger dirs and journal dir are each in a differet device,
# which reduce the contention between random i/o and sequential write.
# It is possible to run with a single disk, but performance will be significantly lower.
ledgerDirectories=/tmp/bk-data
# Directories to store index files. If not specified, will use ledgerDirectories to store.
# indexDirectories=/tmp/bk-data

# Minimum safe usable size to be available in index directory for bookie to create
# Index File while replaying journal at the time of bookie Start in Readonly Mode (in bytes)
# minUsableSizeForIndexFileCreation=1073741824

# Minimum safe usable size to be available in ledger directory for bookie to create
# entry log files (in bytes).
#
# This parameter allows creating entry log files when there are enough disk spaces, even when
# the bookie is running at readonly mode because of the disk usage is exceeding `diskUsageThreshold`.
# Because compaction, journal replays can still write data to disks when a bookie is readonly.
#
# Default value is 1.2 * `logSizeLimit`.
#
# minUsableSizeForEntryLogCreation=

# Minimum safe usable size to be available in ledger directory for bookie to accept
# high priority writes even it is in readonly mode.
#
# If not set, it is the value of `minUsableSizeForEntryLogCreation`
#
# minUsableSizeForHighPriorityWrites=

# When entryLogPerLedgerEnabled is enabled, checkpoint doesn't happens
# when a new active entrylog is created / previous one is rolled over.
# Instead SyncThread checkpoints periodically with 'flushInterval' delay
# (in milliseconds) in between executions. Checkpoint flushes both ledger
# entryLogs and ledger index pages to disk.
# Flushing entrylog and index files will introduce much random disk I/O.
# If separating journal dir and ledger dirs each on different devices,
# flushing would not affect performance. But if putting journal dir
# and ledger dirs on same device, performance degrade significantly
# on too frequent flushing. You can consider increment flush interval
# to get better performance, but you need to pay more time on bookie
# server restart after failure.
# This config is used only when entryLogPerLedgerEnabled is enabled.
# flushInterval=10000

# Allow the expansion of bookie storage capacity. Newly added ledger
# and index dirs must be empty.
# allowStorageExpansion=false

#############################################################################
## Entry log settings
#############################################################################

# Max file size of entry logger, in bytes
# A new entry log file will be created when the old one reaches the file size limitation
# logSizeLimit=1073741824

# Enable/Disable entry logger preallocation
# entryLogFilePreallocationEnabled=true

# Entry log flush interval in bytes.
# Default is 0. 0 or less disables this feature and effectively flush
# happens on log rotation.
# Flushing in smaller chunks but more frequently reduces spikes in disk
# I/O. Flushing too frequently may also affect performance negatively.
# flushEntrylogBytes=0

# The number of bytes we should use as capacity for BufferedReadChannel. Default is 512 bytes.
# readBufferSizeBytes=512

# The number of bytes used as capacity for the write buffer. Default is 64KB.
# writeBufferSizeBytes=65536

# Specifies if entryLog per ledger is enabled/disabled. If it is enabled, then there would be a
# active entrylog for each ledger. It would be ideal to enable this feature if the underlying
# storage device has multiple DiskPartitions or SSD and if in a given moment, entries of fewer
# number of active ledgers are written to a bookie.
# entryLogPerLedgerEnabled=false

# In the case of multipleentrylogs, multiple threads can be used to flush the memtable
# numOfMemtableFlushThreads=8

# in entryLogPerLedger feature, the time duration used for lastaccess eviction policy for cache
# entrylogMapAccessExpiryTimeInSeconds=300

# in entryLogPerLedger feature, this specifies the maximum number of entrylogs that can be
# active at a given point in time
# maximumNumberOfActiveEntryLogs=500

# in EntryLogManagerForEntryLogPerLedger, this config value specifies the metrics cache size
# limits in multiples of entrylogMap cache size limits.
# entryLogPerLedgerCounterLimitsMultFactor=10

#############################################################################
## Entry log compaction settings
#############################################################################

# Allow force compaction when disabling the entry log compaction or not.
# It will enable you to manually force compact the entry log even if
# the entry log compaction is disabled. The 'minorCompactionThreshold' or
# 'majorCompactionThreshold' still needs to be specified.
# forceAllowCompaction=false

# Set the rate at which compaction will read entries. The unit is adds per second.
# compactionRate=1000

# Threshold of minor compaction
# For those entry log files whose remaining size percentage reaches below
# this threshold will be compacted in a minor compaction.
# If it is set to less than zero, the minor compaction is disabled.
# minorCompactionThreshold=0.2

# Interval to run minor compaction, in seconds
# If it is set to less than zero, the minor compaction is disabled.
# minorCompactionInterval=3600

# Maximum milliseconds to run minor Compaction. Defaults to -1 run indefinitely.
# minorCompactionMaxTimeMillis=-1

# Set the maximum number of entries which can be compacted without flushing.
# When compacting, the entries are written to the entrylog and the new offsets
# are cached in memory. Once the entrylog is flushed the index is updated with
# the new offsets. This parameter controls the number of entries added to the
# entrylog before a flush is forced. A higher value for this parameter means
# more memory will be used for offsets. Each offset consists of 3 longs.
# This parameter should _not_ be modified unless you know what you're doing.
# The default is 100,000.
# compactionMaxOutstandingRequests=100000

# Threshold of major compaction
# For those entry log files whose remaining size percentage reaches below
# this threshold will be compacted in a major compaction.
# Those entry log files whose remaining size percentage is still
# higher than the threshold will never be compacted.
# If it is set to less than zero, the minor compaction is disabled.
# majorCompactionThreshold=0.8

# Interval to run major compaction, in seconds
# If it is set to less than zero, the major compaction is disabled.
# majorCompactionInterval=86400

# Maximum milliseconds to run major Compaction. Defaults to -1 run indefinitely.
# majorCompactionMaxTimeMillis=-1

# Throttle compaction by bytes or by entries.
# isThrottleByBytes=false

# Set the rate at which compaction will readd entries. The unit is adds per second.
# compactionRateByEntries=1000

# Set the rate at which compaction will readd entries. The unit is bytes added per second.
# compactionRateByBytes=1000000

# Flag to enable/disable transactional compaction. If it is set to true, it will use transactional compaction,
# which it will use new entry log files to store compacted entries during compaction; if it is set to false,
# it will use normal compaction, which it shares same entry log file with normal add operations.
# useTransactionalCompaction=false

#############################################################################
## Garbage collection settings
#############################################################################

# How long the interval to trigger next garbage collection, in milliseconds
# Since garbage collection is running in background, too frequent gc
# will heart performance. It is better to give a higher number of gc
# interval if there is enough disk capacity.
# gcWaitTime=1000

# How long the interval to trigger next garbage collection of overreplicated
# ledgers, in milliseconds [Default: 1 day]. This should not be run very frequently
# since we read the metadata for all the ledgers on the bookie from zk
# gcOverreplicatedLedgerWaitTime=86400000

# Whether force compaction is allowed when the disk is full or almost full.
# Forcing GC may get some space back, but may also fill up disk space more quickly.
# This is because new log files are created before GC, while old garbage
# log files are deleted after GC.
# isForceGCAllowWhenNoSpace=false

# True if the bookie should double check readMetadata prior to gc
# verifyMetadataOnGC=false

#############################################################################
## Disk utilization
#############################################################################

# For each ledger dir, maximum disk space which can be used.
# Default is 0.95f. i.e. 95% of disk can be used at most after which nothing will
# be written to that partition. If all ledger dir partions are full, then bookie
# will turn to readonly mode if 'readOnlyModeEnabled=true' is set, else it will
# shutdown.
# Valid values should be in between 0 and 1 (exclusive).
# diskUsageThreshold=0.95

# The disk free space low water mark threshold.
# Disk is considered full when usage threshold is exceeded.
# Disk returns back to non-full state when usage is below low water mark threshold.
# This prevents it from going back and forth between these states frequently
# when concurrent writes and compaction are happening. This also prevent bookie from
# switching frequently between read-only and read-writes states in the same cases.
# diskUsageWarnThreshold=0.95

# Set the disk free space low water mark threshold. Disk is considered full when
# usage threshold is exceeded. Disk returns back to non-full state when usage is
# below low water mark threshold. This prevents it from going back and forth
# between these states frequently when concurrent writes and compaction are
# happening. This also prevent bookie from switching frequently between
# read-only and read-writes states in the same cases.
# diskUsageLwmThreshold=0.90

# Disk check interval in milli seconds, interval to check the ledger dirs usage.
# Default is 10000
# diskCheckInterval=10000

#############################################################################
## Sorted Ledger storage configuration
#############################################################################

# These configs are used when the selected 'ledgerStorageClass' is
# org.apache.bookkeeper.bookie.SortedLedgerStorage
# ledgerStorageClass=org.apache.bookkeeper.bookie.SortedLedgerStorage

# The skip list data size limitation (default 64MB) in EntryMemTable
# skipListSizeLimit=67108864

# The number of bytes we should use as chunk allocation for
# org.apache.bookkeeper.bookie.SkipListArena
# skipListArenaChunkSize=4194304

# The max size we should allocate from the skiplist arena. Allocations
# larger than this should be allocated directly by the VM to avoid fragmentation.
# skipListArenaMaxAllocSize=131072

# Max number of ledger index files could be opened in bookie server
# If number of ledger index files reaches this limitation, bookie
# server started to swap some ledgers from memory to disk.
# Too frequent swap will affect performance. You can tune this number
# to gain performance according your requirements.
# openFileLimit=20000

# The minimum total size of the internal file info cache table. Providing a large enough
# estimate at construction time avoids the need for expensive resizing operations later,
# but setting this value unnecessarily high wastes memory. The default value is `1/4` of
# `openFileLimit` if openFileLimit is positive, otherwise it is 64.
# fileInfoCacheInitialCapacity=

# The max idle time allowed for an open file info existed in the file info cache.
# If the file info is idle for a long time, exceed the given time period. The file info
# will be evicted and closed. If the value is zero or negative, the file info is evicted
# only when opened files reached openFileLimit. The default value is 0.
# fileInfoMaxIdleTime=0

# The fileinfo format version to write.
#  Available formats are 0-1:
#   0: Initial version
#   1: persisting explicitLac is introduced
# By default, it is `1`.
# If you'd like to disable persisting ExplicitLac, you can set this config to 0 and
# also journalFormatVersionToWrite should be set to < 6. If there is mismatch then the
# serverconfig is considered invalid.
# fileInfoFormatVersionToWrite = 1

# Size of a index page in ledger cache, in bytes
# A larger index page can improve performance writing page to disk,
# which is efficent when you have small number of ledgers and these
# ledgers have similar number of entries.
# If you have large number of ledgers and each ledger has fewer entries,
# smaller index page would improve memory usage.
# pageSize=8192

# How many index pages provided in ledger cache
# If number of index pages reaches this limitation, bookie server
# starts to swap some ledgers from memory to disk. You can increment
# this value when you found swap became more frequent. But make sure
# pageLimit*pageSize should not more than JVM max memory limitation,
# otherwise you would got OutOfMemoryException.
# In general, incrementing pageLimit, using smaller index page would
# gain bettern performance in lager number of ledgers with fewer entries case
# If pageLimit is -1, bookie server will use 1/3 of JVM memory to compute
# the limitation of number of index pages.
# pageLimit=-1

#############################################################################
## DB Ledger storage configuration
#############################################################################

# These configs are used when the selected 'ledgerStorageClass' is
# org.apache.bookkeeper.bookie.storage.ldb.DbLedgerStorage
# ledgerStorageClass=org.apache.bookkeeper.bookie.storage.ldb.DbLedgerStorage

# Size of Write Cache. Memory is allocated from JVM direct memory.
# Write cache is used to buffer entries before flushing into the entry log
# For good performance, it should be big enough to hold a substantial amount of entries in the flush interval
#  By default it will be allocated to 25% of the available direct memory
# dbStorage_writeCacheMaxSizeMb=

# Size of Read cache. Memory is allocated from JVM direct memory.
# This read cache is pre-filled doing read-ahead whenever a cache miss happens
# By default it will be allocated to 25% of the available direct memory
# dbStorage_readAheadCacheMaxSizeMb=

# How many entries to pre-fill in cache after a read cache miss
# dbStorage_readAheadCacheBatchSize=100

## RocksDB specific configurations
## DbLedgerStorage uses RocksDB to store the indexes from
## (ledgerId, entryId) -> (entryLog, offset)

# Size of RocksDB block-cache. For best performance, this cache
# should be big enough to hold a significant portion of the index
# database which can reach ~2GB in some cases
# Default is to use 10% / numberOfLedgers of the direct memory size
# dbStorage_rocksDB_blockCacheSize=

# Other RocksDB specific tunables
# dbStorage_rocksDB_writeBufferSizeMB=64
# dbStorage_rocksDB_sstSizeInMB=64
# dbStorage_rocksDB_blockSize=65536
# dbStorage_rocksDB_bloomFilterBitsPerKey=10
# dbStorage_rocksDB_numLevels=-1
# dbStorage_rocksDB_numFilesInLevel0=4
# dbStorage_rocksDB_maxSizeInLevel1MB=256


############################################## Metadata Services ##############################################


#############################################################################
## Metadata Service settings
#############################################################################

# metadata service uri that bookkeeper is used for loading corresponding metadata driver and resolving its metadata service location
metadataServiceUri=zk+hierarchical://localhost:2181/ledgers

# @Deprecated - `ledgerManagerFactoryClass` is deprecated in favor of using `metadataServiceUri`
# Ledger Manager Class
# What kind of ledger manager is used to manage how ledgers are stored, managed
# and garbage collected. Try to read 'BookKeeper Internals' for detail info.
# ledgerManagerFactoryClass=org.apache.bookkeeper.meta.HierarchicalLedgerManagerFactory

# @Deprecated - `ledgerManagerType` is deprecated in favor of using `ledgerManagerFactoryClass`.
# ledgerManagerType=hierarchical

# sometimes the bookkeeper server classes are shaded. the ledger manager factory classes might be relocated to be under other packages.
# this would fail the clients using shaded factory classes since the factory classes are not matched. Users can enable this flag to
# allow using shaded ledger manager class to connect to a bookkeeper cluster.
# allowShadedLedgerManagerFactoryClass=false

# the shaded ledger manager factory prefix. this is used when `allowShadedLedgerManagerFactoryClass` is set to true.
# shadedLedgerManagerFactoryClassPrefix=dlshade.

#############################################################################
## ZooKeeper Metadata Service settings
#############################################################################

# @Deprecated - `zkLedgersRootPath` is deprecated in favor of using `metadataServiceUri`
# Root Zookeeper path to store ledger metadata
# This parameter is used by zookeeper-based ledger manager as a root znode to
# store all ledgers.
# zkLedgersRootPath=/ledgers

# @Deprecated - `zkLedgersRootPath` is deprecated in favor of using `metadataServiceUri`
# A list of one of more servers on which Zookeeper is running.
# The server list can be comma separated values, for example:
# zkServers=zk1:2181,zk2:2181,zk3:2181
zkServers=localhost:2181

# ZooKeeper client session timeout in milliseconds
# Bookie server will exit if it received SESSION_EXPIRED because it
# was partitioned off from ZooKeeper for more than the session timeout
# JVM garbage collection, disk I/O will cause SESSION_EXPIRED.
# Increment this value could help avoiding this issue
zkTimeout=10000

# The Zookeeper client backoff retry start time in millis.
# zkRetryBackoffStartMs=1000

# The Zookeeper client backoff retry max time in millis.
# zkRetryBackoffMaxMs=10000

# The Zookeeper request limit. It is only enabled when setting a positive value. Default value is 0.
# zkRequestRateLimit=0

# Set ACLs on every node written on ZooKeeper, this way only allowed users
# will be able to read and write BookKeeper metadata stored on ZooKeeper.
# In order to make ACLs work you need to setup ZooKeeper JAAS authentication
# all the bookies and Client need to share the same user, and this is usually
# done using Kerberos authentication. See ZooKeeper documentation
zkEnableSecurity=false


############################################## Statistics ##############################################


#############################################################################
## Stats Providers
#############################################################################

# Whether statistics are enabled
# enableStatistics=true

# The flag to enable recording task execution stats.
# enableTaskExecutionStats=false

# Stats Provider Class (if `enableStatistics` are enabled)
# Options:
#   - Prometheus        : org.apache.bookkeeper.stats.prometheus.PrometheusMetricsProvider
#   - Codahale          : org.apache.bookkeeper.stats.codahale.CodahaleMetricsProvider
# Default value is:
#   org.apache.bookkeeper.stats.prometheus.PrometheusMetricsProvider
#
# For configuring corresponding stats provider, see details at each section below.
#
# statsProviderClass=org.apache.bookkeeper.stats.prometheus.PrometheusMetricsProvider

#############################################################################
## Prometheus Metrics Provider
#############################################################################

# These configs are used when using `PrometheusMetricsProvider`.
# statsProviderClass=org.apache.bookkeeper.stats.prometheus.PrometheusMetricsProvider

# default bind address for Prometheus metrics exporter
# prometheusStatsHttpAddress=0.0.0.0

# default port for Prometheus metrics exporter
# prometheusStatsHttpPort=8000

# latency stats rollover interval, in seconds
# prometheusStatsLatencyRolloverSeconds=60

#############################################################################
## Codahale Metrics Provider
#############################################################################

# These configs are used when using `CodahaleMetricsProvider`.
# statsProviderClass=org.apache.bookkeeper.stats.codahale.CodahaleMetricsProvider

# metric name prefix, default is ""
# codahaleStatsPrefix=

# the frequency that stats reporters report stats, in seconds
# codahaleStatsOutputFrequencySeconds=60

# the graphite endpoint for reporting stats. see {@link http://metrics.dropwizard.io/3.1.0/manual/graphite/} for more details.
# codahaleStatsGraphiteEndpoint=

# the directory for reporting stats in csv format. see {@link https://metrics.dropwizard.io/3.1.0/manual/core/#csv} for more details.
# codahaleStatsCSVEndpoint=

# the slf4j endpoint for reporting stats. see {@link https://metrics.dropwizard.io/3.1.0/manual/core/#slf4j} for more details.
# codahaleStatsSlf4jEndpoint=

# the jmx endpoint for reporting stats. see {@link https://metrics.dropwizard.io/3.1.0/manual/core/#jmx} for more details.
# codahaleStatsJmxEndpoint=

############################################## Auto Recovery ##############################################

# Whether the bookie itself can start auto-recovery service also or not
# autoRecoveryDaemonEnabled=false

# The default digest type used for opening ledgers.
# digestType=CRC32

# The default password for opening ledgers. Default value is "".
# passwd=

# The flag to enable/disable digest type auto-detection. If it is enabled, the bookkeeper client will ignore
# the provided digest type provided at `digestType` and the provided passwd provided at `passwd`.
# enableDigestTypeAutodetection=true

#############################################################################
## Placement settings
#############################################################################

# the following settings take effects when `autoRecoveryDaemonEnabled` is true.

# The ensemble placement policy used for re-replicating entries.
#
# Options:
#   - org.apache.bookkeeper.client.RackawareEnsemblePlacementPolicy
#   - org.apache.bookkeeper.client.RegionAwareEnsemblePlacementPolicy
#
# Default value:
#   org.apache.bookkeeper.client.RackawareEnsemblePlacementPolicy
#
# ensemblePlacementPolicy=org.apache.bookkeeper.client.RackawareEnsemblePlacementPolicy

# The dns resolver class used for resolving network locations for bookies. This setting is used
# when using either RackawareEnsemblePlacementPolicy and RegionAwareEnsemblePlacementPolicy
# reppDnsResolverClass=org.apache.bookkeeper.net.ScriptBasedMapping

# The bash script used by `ScriptBasedMapping` dns resolver for resolving bookies' network locations.
# networkTopologyScriptFileName=

# The max number of args used in the script provided at `networkTopologyScriptFileName`
# networkTopologyScriptNumberArgs=100

# minimum number of racks per write quorum. RackawareEnsemblePlacementPolicy will try to
# get bookies from atleast 'minNumRacksPerWriteQuorum' racks for a writeQuorum.
# minNumRacksPerWriteQuorum=2

# 'enforceMinNumRacksPerWriteQuorum' enforces RackawareEnsemblePlacementPolicy to pick
# bookies from 'minNumRacksPerWriteQuorum' racks for a writeQuorum. If it cann't find
# bookie then it would throw BKNotEnoughBookiesException instead of picking random one.
# enforceMinNumRacksPerWriteQuorum=false

# Enforce write being acknowledged by bookies belonging to atleast minimum
# number of fault domains(depending on the placement policy) before being
# acknowledged by bookkeeper.
# enforceMinNumFaultDomainsForWrite=false

#############################################################################
## Auditor settings
#############################################################################

# The interval between auditor bookie checks.
# The auditor bookie check, checks ledger metadata to see which bookies should
# contain entries for each ledger. If a bookie which should contain entries is
# unavailable, then the ledger containing that entry is marked for recovery.
# Setting this to 0 disabled the periodic check. Bookie checks will still
# run when a bookie fails.
# The interval is specified in seconds.
# auditorPeriodicBookieCheckInterval=86400

# Interval at which the auditor will do a check of all ledgers in the cluster.
# By default this runs once a week. The interval is set in seconds.
# To disable the periodic check completely, set this to 0.
# Note that periodic checking will put extra load on the cluster, so it should
# not be run more frequently than once a day.
# auditorPeriodicCheckInterval=604800

# The percentage of a ledger (fragment)'s entries will be verified before claiming this fragment as missing fragment.
# Default is 0, which only verify the first and last entries of a given fragment.
# auditorLedgerVerificationPercentage=0

# How long to wait, in seconds, before starting auto recovery of a lost bookie
# lostBookieRecoveryDelay=0

# Enable the Auditor to use system time as underreplicated ledger mark time.
# If this is enabled, Auditor will write a ctime field into the underreplicated ledger znode.
# storeSystemTimeAsLedgerUnderreplicatedMarkTime=true

#############################################################################
## Replication Worker settings
#############################################################################

# The number of entries that a replication will rereplicate in parallel.
# rereplicationEntryBatchSize=10

# The grace period, in milliseconds, that the replication worker waits before fencing and
# replicating a ledger fragment that's still being written to upon bookie failure.
# openLedgerRereplicationGracePeriod=30000

# The time to backoff when replication worker encounters exceptions on replicating a ledger, in milliseconds.
# rwRereplicateBackoffMs=5000


##################################################################
##################################################################
# Settings below are used by stream/table service
##################################################################
##################################################################

### Grpc Server ###

# the grpc server port to listen on. default is 4181
storageserver.grpc.port=4181

### Dlog Settings for table service ###

#### Replication Settings
dlog.bkcEnsembleSize=3
dlog.bkcWriteQuorumSize=2
dlog.bkcAckQuorumSize=2

### Storage ###

# local storage directories for storing table ranges data (e.g. rocksdb sst files)
storage.range.store.dirs=data/bookkeeper/ranges

# whether the storage server capable of serving readonly tables. default is false.
storage.serve.readonly.tables=false

# the cluster controller schedule interval, in milliseconds. default is 30 seconds.
storage.cluster.controller.schedule.interval.ms=30000


#############################################################################
## Netty Allocator Settings
#############################################################################

# Define the memory pooling policy.
# Available options are:
#   - PooledDirect: Use Direct memory for all buffers and pool the memory.
#                   Direct memory will avoid the overhead of JVM GC and most
#                   memory copies when reading and writing to socket channel.
#                   Pooling will add memory space overhead due to the fact that
#                   there will be fragmentation in the allocator and that threads
#                   will keep a portion of memory as thread-local to avoid
#                   contention when possible.
#   - UnpooledHeap: Allocate memory from JVM heap without any pooling.
#                   This option has the least overhead in terms of memory usage
#                   since the memory will be automatically reclaimed by the
#                   JVM GC but might impose a performance penalty at high
#                   throughput.
# Default is: PooledDirect
# allocatorPoolingPolicy=PooledDirect

# Controls the amount of concurrency for the memory pool.
# Default is to have a number of allocator arenas equals to 2 * CPUS.
# Decreasing this number will reduce the amount of memory overhead, at the
# expense of increased allocation contention.
# allocatorPoolingConcurrency=8

# Define the memory allocator out of memory policy.
# Available options are:
#   - FallbackToHeap: If it's not possible to allocate a buffer from direct memory,
#                     fallback to allocate an unpooled buffer from JVM heap.
#                     This will help absorb memory allocation spikes because the heap
#                     allocations will naturally slow down the process and will result
#                     if full GC cleanup if the Heap itself is full.
#   - ThrowException: Throw regular OOM exception without taking addition actions.
# Default is: FallbackToHeap
# allocatorOutOfMemoryPolicy=FallbackToHeap

# Available options are:
#   - Disabled: No leak detection and no overhead.
#   - Simple: Instruments 1% of the allocated buffer to track for leaks.
#   - Advanced: Instruments 1% of the allocated buffer to track for leaks, reporting
#               stack traces of places where the buffer was used.
#   - Paranoid: Instruments 100% of the allocated buffer to track for leaks, reporting
#               stack traces of places where the buffer was used. Introduce very
#               significant overhead.
# Default is: Disabled
# allocatorLeakDetectionPolicy=Disabled