diff --git a/site/docs/spark/2.1.2/documentation.md b/site/docs/spark/2.1.2/documentation.md
index 6cd15df..932b390 100644
--- a/site/docs/spark/2.1.2/documentation.md
+++ b/site/docs/spark/2.1.2/documentation.md
@@ -31,13 +31,13 @@
 
 #### SQL  Data Sources
 
-[Apache CouchDB/Cloudant data source](../spark-sql-cloudant) ![](/assets/themes/apache-clean/img/new-black.png){:height="36px" width="36px"}
+[Apache CouchDB/Cloudant data source](../spark-sql-cloudant)
 
 <br/>
 
 #### Structured Streaming Data Sources
 
-[Akka data source](../spark-sql-streaming-akka) ![](/assets/themes/apache-clean/img/new-black.png){:height="36px" width="36px"}
+[Akka data source](../spark-sql-streaming-akka)
 
 [MQTT data source](../spark-sql-streaming-mqtt)
 
@@ -45,11 +45,11 @@
 
 #### Discretized Streams (DStreams) Connectors
 
-[Apache CouchDB/Cloudant connector](../spark-sql-cloudant) ![](/assets/themes/apache-clean/img/new-black.png){:height="36px" width="36px"}
+[Apache CouchDB/Cloudant connector](../spark-sql-cloudant)
 
 [Akka connector](../spark-streaming-akka)
 
-[Google Cloud Pub/Sub connector](../spark-streaming-pubsub) ![](/assets/themes/apache-clean/img/new-black.png){:height="36px" width="36px"}
+[Google Cloud Pub/Sub connector](../spark-streaming-pubsub)
 
 [MQTT connector](../spark-streaming-mqtt)
 
diff --git a/site/docs/spark/2.1.3/documentation.md b/site/docs/spark/2.1.3/documentation.md
new file mode 100644
index 0000000..932b390
--- /dev/null
+++ b/site/docs/spark/2.1.3/documentation.md
@@ -0,0 +1,58 @@
+---
+layout: page
+title: Extensions for Apache Spark
+description: Extensions for Apache Spark
+group: nav-right
+---
+<!--
+{% comment %}
+Licensed to the Apache Software Foundation (ASF) under one or more
+contributor license agreements.  See the NOTICE file distributed with
+this work for additional information regarding copyright ownership.
+The ASF licenses this file to you under the Apache License, Version 2.0
+(the "License"); you may not use this file except in compliance with
+the License.  You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+{% endcomment %}
+-->
+
+{% include JB/setup %}
+
+### Apache Bahir Extensions for Apache Spark
+
+<br/>
+
+#### SQL  Data Sources
+
+[Apache CouchDB/Cloudant data source](../spark-sql-cloudant)
+
+<br/>
+
+#### Structured Streaming Data Sources
+
+[Akka data source](../spark-sql-streaming-akka)
+
+[MQTT data source](../spark-sql-streaming-mqtt)
+
+<br/>
+
+#### Discretized Streams (DStreams) Connectors
+
+[Apache CouchDB/Cloudant connector](../spark-sql-cloudant)
+
+[Akka connector](../spark-streaming-akka)
+
+[Google Cloud Pub/Sub connector](../spark-streaming-pubsub)
+
+[MQTT connector](../spark-streaming-mqtt)
+
+[Twitter connector](../spark-streaming-twitter)
+
+[ZeroMQ connector](../spark-streaming-zeromq)
diff --git a/site/docs/spark/2.1.3/spark-sql-cloudant.md b/site/docs/spark/2.1.3/spark-sql-cloudant.md
new file mode 100644
index 0000000..1e7b627
--- /dev/null
+++ b/site/docs/spark/2.1.3/spark-sql-cloudant.md
@@ -0,0 +1,343 @@
+---
+layout: page
+title: Spark Data Source for Apache CouchDB/Cloudant
+description: Spark Data Source for Apache CouchDB/Cloudant
+group: nav-right
+---
+<!--
+{% comment %}
+Licensed to the Apache Software Foundation (ASF) under one or more
+contributor license agreements.  See the NOTICE file distributed with
+this work for additional information regarding copyright ownership.
+The ASF licenses this file to you under the Apache License, Version 2.0
+(the "License"); you may not use this file except in compliance with
+the License.  You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+{% endcomment %}
+-->
+
+{% include JB/setup %}
+A library for reading data from Cloudant or CouchDB databases using Spark SQL and Spark Streaming.
+
+[IBM® Cloudant®](https://cloudant.com) is a document-oriented DataBase as a Service (DBaaS). It stores data as documents
+in JSON format. It's built with scalability, high availability, and durability in mind. It comes with a
+wide variety of indexing options including map-reduce, Cloudant Query, full-text indexing, and
+geospatial indexing. The replication capabilities make it easy to keep data in sync between database
+clusters, desktop PCs, and mobile devices.
+
+[Apache CouchDB™](http://couchdb.apache.org) is open source database software that focuses on ease of use and having an architecture that "completely embraces the Web". It has a document-oriented NoSQL database architecture and is implemented in the concurrency-oriented language Erlang; it uses JSON to store data, JavaScript as its query language using MapReduce, and HTTP for an API.
+
+## Linking
+
+Using SBT:
+
+    libraryDependencies += "org.apache.bahir" %% "spark-sql-cloudant" % "2.1.3"
+
+Using Maven:
+
+    <dependency>
+        <groupId>org.apache.bahir</groupId>
+        <artifactId>spark-sql-cloudant_2.11</artifactId>
+        <version>2.1.3</version>
+    </dependency>
+
+This library can also be added to Spark jobs launched through `spark-shell` or `spark-submit` by using the `--packages` command line option.
+
+    $ bin/spark-shell --packages org.apache.bahir:spark-sql-cloudant_2.11:2.1.3
+
+Unlike using `--jars`, using `--packages` ensures that this library and its dependencies will be added to the classpath.
+The `--packages` argument can also be used with `bin/spark-submit`.
+
+Submit a job in Python:
+
+    spark-submit  --master local[4] --packages org.apache.bahir:spark-sql-cloudant_2.11:2.1.3  <path to python script>
+
+Submit a job in Scala:
+
+	spark-submit --class "<your class>" --master local[4] --packages org.apache.bahir:spark-sql-cloudant_2.11:2.1.3 <path to spark-sql-cloudant jar>
+
+This library is compiled for Scala 2.11 only, and intends to support Spark 2.0 onwards.
+
+## Configuration options
+The configuration is obtained in the following sequence:
+
+1. default in the Config, which is set in the application.conf
+2. key in the SparkConf, which is set in SparkConf
+3. key in the parameters, which is set in a dataframe or temporaty table options
+4. "spark."+key in the SparkConf (as they are treated as the one passed in through spark-submit using --conf option)
+
+Here each subsequent configuration overrides the previous one. Thus, configuration set using DataFrame option overrides what has beens set in SparkConf. And configuration passed in spark-submit using --conf takes precedence over any setting in the code.
+
+
+### Configuration in application.conf
+Default values are defined in [here](src/main/resources/application.conf).
+
+### Configuration on SparkConf
+
+Name | Default | Meaning
+--- |:---:| ---
+cloudant.batchInterval|8|number of seconds to set for streaming all documents from `_changes` endpoint into Spark dataframe.  See [Setting the right batch interval](https://spark.apache.org/docs/latest/streaming-programming-guide.html#setting-the-right-batch-interval) for tuning this value.
+cloudant.endpoint|`_all_docs`|endpoint for RelationProvider when loading data from Cloudant to DataFrames or SQL temporary tables. Select between the Cloudant `_all_docs` or `_changes` API endpoint.  See **Note** below for differences between endpoints.
+cloudant.protocol|https|protocol to use to transfer data: http or https
+cloudant.host| |cloudant host url
+cloudant.username| |cloudant userid
+cloudant.password| |cloudant password
+cloudant.numberOfRetries|3| number of times to replay a request that received a 429 `Too Many Requests` response
+cloudant.useQuery|false|by default, `_all_docs` endpoint is used if configuration 'view' and 'index' (see below) are not set. When useQuery is enabled, `_find` endpoint will be used in place of `_all_docs` when query condition is not on primary key field (_id), so that query predicates may be driven into datastore.
+cloudant.queryLimit|25|the maximum number of results returned when querying the `_find` endpoint.
+cloudant.storageLevel|MEMORY_ONLY|the storage level for persisting Spark RDDs during load when `cloudant.endpoint` is set to `_changes`.  See [RDD Persistence section](https://spark.apache.org/docs/latest/programming-guide.html#rdd-persistence) in Spark's Progamming Guide for all available storage level options.
+cloudant.timeout|60000|stop the response after waiting the defined number of milliseconds for data.  Only supported with `changes` endpoint.
+jsonstore.rdd.partitions|10|the number of partitions intent used to drive JsonStoreRDD loading query result in parallel. The actual number is calculated based on total rows returned and satisfying maxInPartition and minInPartition. Only supported with `_all_docs` endpoint.
+jsonstore.rdd.maxInPartition|-1|the max rows in a partition. -1 means unlimited
+jsonstore.rdd.minInPartition|10|the min rows in a partition.
+jsonstore.rdd.requestTimeout|900000|the request timeout in milliseconds
+bulkSize|200|the bulk save size
+schemaSampleSize|-1|the sample size for RDD schema discovery. 1 means we are using only the first document for schema discovery; -1 means all documents; 0 will be treated as 1; any number N means min(N, total) docs. Only supported with `_all_docs` endpoint.
+createDBOnSave|false|whether to create a new database during save operation. If false, a database should already exist. If true, a new database will be created. If true, and a database with a provided name already exists, an error will be raised.
+
+The `cloudant.endpoint` option sets ` _changes` or `_all_docs` API endpoint to be called while loading Cloudant data into Spark DataFrames or SQL Tables.
+
+**Note:** When using `_changes` API, please consider:
+1. Results are partially ordered and may not be be presented in order in
+which documents were updated.
+2. In case of shards' unavailability, you may see duplicate results (changes that have been seen already)
+3. Can use `selector` option to filter Cloudant docs during load
+4. Supports a real snapshot of the database and represents it in a single point of time.
+5. Only supports a single partition.
+
+
+When using `_all_docs` API:
+1. Supports parallel reads (using offset and range) and partitioning.
+2. Using partitions may not represent the true snapshot of a database.  Some docs
+   may be added or deleted in the database between loading data into different
+   Spark partitions.
+
+If loading Cloudant docs from a database greater than 100 MB, set `cloudant.endpoint` to `_changes` and `spark.streaming.unpersist` to `false`.
+This will enable RDD persistence during load against `_changes` endpoint and allow the persisted RDDs to be accessible after streaming completes.  
+
+See [CloudantChangesDFSuite](src/test/scala/org/apache/bahir/cloudant/CloudantChangesDFSuite.scala)
+for examples of loading data into a Spark DataFrame with `_changes` API.
+
+### Configuration on Spark SQL Temporary Table or DataFrame
+
+Besides all the configurations passed to a temporary table or dataframe through SparkConf, it is also possible to set the following configurations in temporary table or dataframe using OPTIONS:
+
+Name | Default | Meaning
+--- |:---:| ---
+bulkSize|200| the bulk save size
+createDBOnSave|false| whether to create a new database during save operation. If false, a database should already exist. If true, a new database will be created. If true, and a database with a provided name already exists, an error will be raised.
+database| | Cloudant database name
+index| | Cloudant Search index without the database name. Search index queries are limited to returning 200 results so can only be used to load data with <= 200 results.
+path| | Cloudant: as database name if database is not present
+schemaSampleSize|-1| the sample size used to discover the schema for this temp table. -1 scans all documents
+selector|all documents| a selector written in Cloudant Query syntax, specifying conditions for selecting documents when the `cloudant.endpoint` option is set to `_changes`. Only documents satisfying the selector's conditions will be retrieved from Cloudant and loaded into Spark.
+view| | Cloudant view w/o the database name. only used for load.
+
+For fast loading, views are loaded without include_docs. Thus, a derived schema will always be: `{id, key, value}`, where `value `can be a compount field. An example of loading data from a view:
+
+```python
+spark.sql(" CREATE TEMPORARY TABLE flightTable1 USING org.apache.bahir.cloudant OPTIONS ( database 'n_flight', view '_design/view/_view/AA0')")
+
+```
+
+### Configuration on Cloudant Receiver for Spark Streaming
+
+Name | Default | Meaning
+--- |:---:| ---
+cloudant.host||cloudant host url
+cloudant.username||cloudant userid
+cloudant.password||cloudant password
+database||cloudant database name
+selector| all documents| a selector written in Cloudant Query syntax, specifying conditions for selecting documents. Only documents satisfying the selector's conditions will be retrieved from Cloudant and loaded into Spark.
+
+### Configuration in spark-submit using --conf option
+
+The above stated configuration keys can also be set using `spark-submit --conf` option. When passing configuration in spark-submit, make sure adding "spark." as prefix to the keys.
+
+
+## Examples
+
+### Python API
+
+#### Using SQL In Python
+
+```python
+spark = SparkSession\
+    .builder\
+    .appName("Cloudant Spark SQL Example in Python using temp tables")\
+    .config("cloudant.host","ACCOUNT.cloudant.com")\
+    .config("cloudant.username", "USERNAME")\
+    .config("cloudant.password","PASSWORD")\
+    .getOrCreate()
+
+
+# Loading temp table from Cloudant db
+spark.sql(" CREATE TEMPORARY TABLE airportTable USING org.apache.bahir.cloudant OPTIONS ( database 'n_airportcodemapping')")
+airportData = spark.sql("SELECT _id, airportName FROM airportTable WHERE _id >= 'CAA' AND _id <= 'GAA' ORDER BY _id")
+airportData.printSchema()
+print 'Total # of rows in airportData: ' + str(airportData.count())
+for code in airportData.collect():
+    print code._id
+```
+
+See [CloudantApp.py](examples/python/CloudantApp.py) for examples.
+
+Submit job example:
+```
+spark-submit  --packages org.apache.bahir:spark-sql-cloudant_2.11:2.1.3 --conf spark.cloudant.host=ACCOUNT.cloudant.com --conf spark.cloudant.username=USERNAME --conf spark.cloudant.password=PASSWORD sql-cloudant/examples/python/CloudantApp.py
+```
+
+#### Using DataFrame In Python
+
+```python
+spark = SparkSession\
+    .builder\
+    .appName("Cloudant Spark SQL Example in Python using dataframes")\
+    .config("cloudant.host","ACCOUNT.cloudant.com")\
+    .config("cloudant.username", "USERNAME")\
+    .config("cloudant.password","PASSWORD")\
+    .config("jsonstore.rdd.partitions", 8)\
+    .getOrCreate()
+
+# ***1. Loading dataframe from Cloudant db
+df = spark.read.load("n_airportcodemapping", "org.apache.bahir.cloudant")
+df.cache()
+df.printSchema()
+df.filter(df.airportName >= 'Moscow').select("_id",'airportName').show()
+df.filter(df._id >= 'CAA').select("_id",'airportName').show()	    
+```
+
+See [CloudantDF.py](examples/python/CloudantDF.py) for examples.
+
+In case of doing multiple operations on a dataframe (select, filter etc.),
+you should persist a dataframe. Otherwise, every operation on a dataframe will load the same data from Cloudant again.
+Persisting will also speed up computation. This statement will persist an RDD in memory: `df.cache()`.  Alternatively for large dbs to persist in memory & disk, use:
+
+```python
+from pyspark import StorageLevel
+df.persist(storageLevel = StorageLevel(True, True, False, True, 1))
+```
+
+[Sample code](examples/python/CloudantDFOption.py) on using DataFrame option to define cloudant configuration
+
+### Scala API
+
+#### Using SQL In Scala
+
+```scala
+val spark = SparkSession
+      .builder()
+      .appName("Cloudant Spark SQL Example")
+      .config("cloudant.host","ACCOUNT.cloudant.com")
+      .config("cloudant.username", "USERNAME")
+      .config("cloudant.password","PASSWORD")
+      .getOrCreate()
+
+// For implicit conversions of Dataframe to RDDs
+import spark.implicits._
+
+// create a temp table from Cloudant db and query it using sql syntax
+spark.sql(
+    s"""
+    |CREATE TEMPORARY TABLE airportTable
+    |USING org.apache.bahir.cloudant
+    |OPTIONS ( database 'n_airportcodemapping')
+    """.stripMargin)
+// create a dataframe
+val airportData = spark.sql("SELECT _id, airportName FROM airportTable WHERE _id >= 'CAA' AND _id <= 'GAA' ORDER BY _id")
+airportData.printSchema()
+println(s"Total # of rows in airportData: " + airportData.count())
+// convert dataframe to array of Rows, and process each row
+airportData.map(t => "code: " + t(0) + ",name:" + t(1)).collect().foreach(println)
+```
+See [CloudantApp.scala](examples/scala/src/main/scala/mytest/spark/CloudantApp.scala) for examples.
+
+Submit job example:
+```
+spark-submit --class org.apache.spark.examples.sql.cloudant.CloudantApp --packages org.apache.bahir:spark-sql-cloudant_2.11:2.1.3 --conf spark.cloudant.host=ACCOUNT.cloudant.com --conf spark.cloudant.username=USERNAME --conf spark.cloudant.password=PASSWORD  /path/to/spark-sql-cloudant_2.11-2.1.3-tests.jar
+```
+
+### Using DataFrame In Scala
+
+```scala
+val spark = SparkSession
+      .builder()
+      .appName("Cloudant Spark SQL Example with Dataframe")
+      .config("cloudant.host","ACCOUNT.cloudant.com")
+      .config("cloudant.username", "USERNAME")
+      .config("cloudant.password","PASSWORD")
+      .config("createDBOnSave","true") // to create a db on save
+      .config("jsonstore.rdd.partitions", "20") // using 20 partitions
+      .getOrCreate()
+
+// 1. Loading data from Cloudant db
+val df = spark.read.format("org.apache.bahir.cloudant").load("n_flight")
+// Caching df in memory to speed computations
+// and not to retrieve data from cloudant again
+df.cache()
+df.printSchema()
+
+// 2. Saving dataframe to Cloudant db
+val df2 = df.filter(df("flightSegmentId") === "AA106")
+    .select("flightSegmentId","economyClassBaseCost")
+df2.show()
+df2.write.format("org.apache.bahir.cloudant").save("n_flight2")
+```
+
+See [CloudantDF.scala](examples/scala/src/main/scala/mytest/spark/CloudantDF.scala) for examples.
+
+[Sample code](examples/scala/src/main/scala/mytest/spark/CloudantDFOption.scala) on using DataFrame option to define Cloudant configuration.
+
+
+### Using Streams In Scala
+
+```scala
+val ssc = new StreamingContext(sparkConf, Seconds(10))
+val changes = ssc.receiverStream(new CloudantReceiver(Map(
+  "cloudant.host" -> "ACCOUNT.cloudant.com",
+  "cloudant.username" -> "USERNAME",
+  "cloudant.password" -> "PASSWORD",
+  "database" -> "n_airportcodemapping")))
+
+changes.foreachRDD((rdd: RDD[String], time: Time) => {
+  // Get the singleton instance of SparkSession
+  val spark = SparkSessionSingleton.getInstance(rdd.sparkContext.getConf)
+
+  println(s"========= $time =========")
+  // Convert RDD[String] to DataFrame
+  val changesDataFrame = spark.read.json(rdd)
+  if (!changesDataFrame.schema.isEmpty) {
+    changesDataFrame.printSchema()
+    changesDataFrame.select("*").show()
+    ....
+  }
+})
+ssc.start()
+// run streaming for 120 secs
+Thread.sleep(120000L)
+ssc.stop(true)
+
+```
+
+See [CloudantStreaming.scala](examples/scala/src/main/scala/mytest/spark/CloudantStreaming.scala) for examples.
+
+By default, Spark Streaming will load all documents from a database. If you want to limit the loading to
+specific documents, use `selector` option of `CloudantReceiver` and specify your conditions
+(See [CloudantStreamingSelector.scala](examples/scala/src/main/scala/mytest/spark/CloudantStreamingSelector.scala)
+example for more details):
+
+```scala
+val changes = ssc.receiverStream(new CloudantReceiver(Map(
+  "cloudant.host" -> "ACCOUNT.cloudant.com",
+  "cloudant.username" -> "USERNAME",
+  "cloudant.password" -> "PASSWORD",
+  "database" -> "sales",
+  "selector" -> "{\"month\":\"May\", \"rep\":\"John\"}")))
+```
diff --git a/site/docs/spark/2.1.3/spark-sql-streaming-akka.md b/site/docs/spark/2.1.3/spark-sql-streaming-akka.md
new file mode 100644
index 0000000..fac797e
--- /dev/null
+++ b/site/docs/spark/2.1.3/spark-sql-streaming-akka.md
@@ -0,0 +1,137 @@
+---
+layout: page
+title: Spark Structured Streaming Akka
+description: Spark Structured Streaming Akka
+group: nav-right
+---
+<!--
+{% comment %}
+Licensed to the Apache Software Foundation (ASF) under one or more
+contributor license agreements.  See the NOTICE file distributed with
+this work for additional information regarding copyright ownership.
+The ASF licenses this file to you under the Apache License, Version 2.0
+(the "License"); you may not use this file except in compliance with
+the License.  You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+{% endcomment %}
+-->
+
+{% include JB/setup %}
+A library for reading data from Akka Actors using Spark SQL Streaming ( or Structured streaming.).
+
+## Linking
+
+Using SBT:
+
+    libraryDependencies += "org.apache.bahir" %% "spark-sql-streaming-akka" % "2.1.3"
+
+Using Maven:
+
+    <dependency>
+        <groupId>org.apache.bahir</groupId>
+        <artifactId>spark-sql-streaming-akka_2.11</artifactId>
+        <version>2.1.3</version>
+    </dependency>
+
+This library can also be added to Spark jobs launched through `spark-shell` or `spark-submit` by using the `--packages` command line option.
+For example, to include it when starting the spark shell:
+
+    $ bin/spark-shell --packages org.apache.bahir:spark-sql-streaming-akka_2.11:2.1.3
+
+Unlike using `--jars`, using `--packages` ensures that this library and its dependencies will be added to the classpath.
+The `--packages` argument can also be used with `bin/spark-submit`.
+
+This library is compiled for Scala 2.11 only, and intends to support Spark 2.0 onwards.
+
+## Examples
+
+A SQL Stream can be created with data streams received from Akka Feeder actor using,
+
+        sqlContext.readStream
+                .format("org.apache.bahir.sql.streaming.akka.AkkaStreamSourceProvider")
+                .option("urlOfPublisher", "feederActorUri")
+                .load()
+
+## Enable recovering from failures.
+
+Setting values for option `persistenceDirPath` helps in recovering in case of a restart, by restoring the state where it left off before the shutdown.
+
+        sqlContext.readStream
+                .format("org.apache.bahir.sql.streaming.akka.AkkaStreamSourceProvider")
+                .option("urlOfPublisher", "feederActorUri")
+                .option("persistenceDirPath", "/path/to/localdir")
+                .load()
+
+## Configuration options.
+
+This source uses [Akka Actor api](http://doc.akka.io/api/akka/2.4/akka/actor/Actor.html).
+
+* `urlOfPublisher` The url of Publisher or Feeder actor that the Receiver actor connects to. Set this as the tcp url of the Publisher or Feeder actor.
+* `persistenceDirPath` By default it is used for storing incoming messages on disk.
+
+### Scala API
+
+An example, for scala API to count words from incoming message stream.
+
+        // Create DataFrame representing the stream of input lines from connection
+        // to publisher or feeder actor
+        val lines = spark.readStream
+                    .format("org.apache.bahir.sql.streaming.akka.AkkaStreamSourceProvider")
+                    .option("urlOfPublisher", urlOfPublisher)
+                    .load().as[(String, Timestamp)]
+
+        // Split the lines into words
+        val words = lines.map(_._1).flatMap(_.split(" "))
+
+        // Generate running word count
+        val wordCounts = words.groupBy("value").count()
+
+        // Start running the query that prints the running counts to the console
+        val query = wordCounts.writeStream
+                    .outputMode("complete")
+                    .format("console")
+                    .start()
+
+        query.awaitTermination()
+
+Please see `AkkaStreamWordCount.scala` for full example.     
+
+### Java API
+
+An example, for Java API to count words from incoming message stream.
+
+        // Create DataFrame representing the stream of input lines from connection
+        // to publisher or feeder actor
+        Dataset<String> lines = spark
+                                .readStream()
+                                .format("org.apache.bahir.sql.streaming.akka.AkkaStreamSourceProvider")
+                                .option("urlOfPublisher", urlOfPublisher)
+                                .load().select("value").as(Encoders.STRING());
+
+        // Split the lines into words
+        Dataset<String> words = lines.flatMap(new FlatMapFunction<String, String>() {
+          @Override
+          public Iterator<String> call(String s) throws Exception {
+            return Arrays.asList(s.split(" ")).iterator();
+          }
+        }, Encoders.STRING());
+
+        // Generate running word count
+        Dataset<Row> wordCounts = words.groupBy("value").count();
+
+        // Start running the query that prints the running counts to the console
+        StreamingQuery query = wordCounts.writeStream()
+                                .outputMode("complete")
+                                .format("console")
+                                .start();
+
+        query.awaitTermination();   
+
+Please see `JavaAkkaStreamWordCount.java` for full example.      
diff --git a/site/docs/spark/2.1.3/spark-sql-streaming-mqtt.md b/site/docs/spark/2.1.3/spark-sql-streaming-mqtt.md
new file mode 100644
index 0000000..fd6c553
--- /dev/null
+++ b/site/docs/spark/2.1.3/spark-sql-streaming-mqtt.md
@@ -0,0 +1,147 @@
+---
+layout: page
+title: Spark Structured Streaming MQTT
+description: Spark Structured Streaming MQTT
+group: nav-right
+---
+<!--
+{% comment %}
+Licensed to the Apache Software Foundation (ASF) under one or more
+contributor license agreements.  See the NOTICE file distributed with
+this work for additional information regarding copyright ownership.
+The ASF licenses this file to you under the Apache License, Version 2.0
+(the "License"); you may not use this file except in compliance with
+the License.  You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+{% endcomment %}
+-->
+
+{% include JB/setup %}
+
+A library for reading data from MQTT Servers using Spark SQL Streaming ( or Structured streaming.).
+
+## Linking
+
+Using SBT:
+
+    libraryDependencies += "org.apache.bahir" %% "spark-sql-streaming-mqtt" % "2.1.3"
+
+Using Maven:
+
+    <dependency>
+        <groupId>org.apache.bahir</groupId>
+        <artifactId>spark-sql-streaming-mqtt_2.11</artifactId>
+        <version>2.1.3</version>
+    </dependency>
+
+This library can also be added to Spark jobs launched through `spark-shell` or `spark-submit` by using the `--packages` command line option.
+For example, to include it when starting the spark shell:
+
+    $ bin/spark-shell --packages org.apache.bahir:spark-sql-streaming-mqtt_2.11:2.1.3
+
+Unlike using `--jars`, using `--packages` ensures that this library and its dependencies will be added to the classpath.
+The `--packages` argument can also be used with `bin/spark-submit`.
+
+This library is compiled for Scala 2.11 only, and intends to support Spark 2.0 onwards.
+
+## Examples
+
+A SQL Stream can be created with data streams received through MQTT Server using,
+
+    sqlContext.readStream
+        .format("org.apache.bahir.sql.streaming.mqtt.MQTTStreamSourceProvider")
+        .option("topic", "mytopic")
+        .load("tcp://localhost:1883")
+
+## Enable recovering from failures.
+
+Setting values for option `localStorage` and `clientId` helps in recovering in case of a restart, by restoring the state where it left off before the shutdown.
+
+    sqlContext.readStream
+        .format("org.apache.bahir.sql.streaming.mqtt.MQTTStreamSourceProvider")
+        .option("topic", "mytopic")
+        .option("localStorage", "/path/to/localdir")
+        .option("clientId", "some-client-id")
+        .load("tcp://localhost:1883")
+
+## Configuration options.
+
+This source uses [Eclipse Paho Java Client](https://eclipse.org/paho/clients/java/). Client API documentation is located [here](http://www.eclipse.org/paho/files/javadoc/index.html).
+
+ * `brokerUrl` A url MqttClient connects to. Set this or `path` as the url of the Mqtt Server. e.g. tcp://localhost:1883.
+ * `persistence` By default it is used for storing incoming messages on disk. If `memory` is provided as value for this option, then recovery on restart is not supported.
+ * `topic` Topic MqttClient subscribes to.
+ * `clientId` clientId, this client is assoicated with. Provide the same value to recover a stopped client.
+ * `QoS` The maximum quality of service to subscribe each topic at. Messages published at a lower quality of service will be received at the published QoS. Messages published at a higher quality of service will be received using the QoS specified on the subscribe.
+ * `username` Sets the user name to use for the connection to Mqtt Server. Do not set it, if server does not need this. Setting it empty will lead to errors.
+ * `password` Sets the password to use for the connection.
+ * `cleanSession` Setting it true starts a clean session, removes all checkpointed messages by a previous run of this source. This is set to false by default.
+ * `connectionTimeout` Sets the connection timeout, a value of 0 is interpretted as wait until client connects. See `MqttConnectOptions.setConnectionTimeout` for more information.
+ * `keepAlive` Same as `MqttConnectOptions.setKeepAliveInterval`.
+ * `mqttVersion` Same as `MqttConnectOptions.setMqttVersion`.
+
+### Scala API
+
+An example, for scala API to count words from incoming message stream.
+
+    // Create DataFrame representing the stream of input lines from connection to mqtt server
+    val lines = spark.readStream
+      .format("org.apache.bahir.sql.streaming.mqtt.MQTTStreamSourceProvider")
+      .option("topic", topic)
+      .load(brokerUrl).as[(String, Timestamp)]
+
+    // Split the lines into words
+    val words = lines.map(_._1).flatMap(_.split(" "))
+
+    // Generate running word count
+    val wordCounts = words.groupBy("value").count()
+
+    // Start running the query that prints the running counts to the console
+    val query = wordCounts.writeStream
+      .outputMode("complete")
+      .format("console")
+      .start()
+
+    query.awaitTermination()
+
+Please see `MQTTStreamWordCount.scala` for full example.
+
+### Java API
+
+An example, for Java API to count words from incoming message stream.
+
+    // Create DataFrame representing the stream of input lines from connection to mqtt server.
+    Dataset<String> lines = spark
+            .readStream()
+            .format("org.apache.bahir.sql.streaming.mqtt.MQTTStreamSourceProvider")
+            .option("topic", topic)
+            .load(brokerUrl).select("value").as(Encoders.STRING());
+
+    // Split the lines into words
+    Dataset<String> words = lines.flatMap(new FlatMapFunction<String, String>() {
+        @Override
+        public Iterator<String> call(String x) {
+            return Arrays.asList(x.split(" ")).iterator();
+        }
+    }, Encoders.STRING());
+
+    // Generate running word count
+    Dataset<Row> wordCounts = words.groupBy("value").count();
+
+    // Start running the query that prints the running counts to the console
+    StreamingQuery query = wordCounts.writeStream()
+            .outputMode("complete")
+            .format("console")
+            .start();
+
+    query.awaitTermination();
+
+Please see `JavaMQTTStreamWordCount.java` for full example.
+
diff --git a/site/docs/spark/2.1.3/spark-streaming-akka.md b/site/docs/spark/2.1.3/spark-streaming-akka.md
new file mode 100644
index 0000000..75c855b
--- /dev/null
+++ b/site/docs/spark/2.1.3/spark-streaming-akka.md
@@ -0,0 +1,89 @@
+---
+layout: page
+title: Spark Streaming Akka
+description: Spark Streaming Akka
+group: nav-right
+---
+<!--
+{% comment %}
+Licensed to the Apache Software Foundation (ASF) under one or more
+contributor license agreements.  See the NOTICE file distributed with
+this work for additional information regarding copyright ownership.
+The ASF licenses this file to you under the Apache License, Version 2.0
+(the "License"); you may not use this file except in compliance with
+the License.  You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+{% endcomment %}
+-->
+
+{% include JB/setup %}
+
+A library for reading data from Akka Actors using Spark Streaming.
+
+## Linking
+
+Using SBT:
+
+    libraryDependencies += "org.apache.bahir" %% "spark-streaming-akka" % "2.1.3"
+
+Using Maven:
+
+    <dependency>
+        <groupId>org.apache.bahir</groupId>
+        <artifactId>spark-streaming-akka_2.11</artifactId>
+        <version>2.1.3</version>
+    </dependency>
+
+This library can also be added to Spark jobs launched through `spark-shell` or `spark-submit` by using the `--packages` command line option.
+For example, to include it when starting the spark shell:
+
+    $ bin/spark-shell --packages org.apache.bahir:spark-streaming-akka_2.11:2.1.3
+
+Unlike using `--jars`, using `--packages` ensures that this library and its dependencies will be added to the classpath.
+The `--packages` argument can also be used with `bin/spark-submit`.
+
+This library is cross-published for Scala 2.10 and Scala 2.11, so users should replace the proper Scala version (2.10 or 2.11) in the commands listed above.
+
+## Examples
+
+DStreams can be created with data streams received through Akka actors by using `AkkaUtils.createStream(ssc, actorProps, actor-name)`.
+
+### Scala API
+
+You need to extend `ActorReceiver` so as to store received data into Spark using `store(...)` methods. The supervisor strategy of
+this actor can be configured to handle failures, etc.
+
+    class CustomActor extends ActorReceiver {
+      def receive = {
+        case data: String => store(data)
+      }
+    }
+
+    // A new input stream can be created with this custom actor as
+    val ssc: StreamingContext = ...
+    val lines = AkkaUtils.createStream[String](ssc, Props[CustomActor](), "CustomReceiver")
+
+### Java API
+
+You need to extend `JavaActorReceiver` so as to store received data into Spark using `store(...)` methods. The supervisor strategy of
+this actor can be configured to handle failures, etc.
+
+    class CustomActor extends JavaActorReceiver {
+        @Override
+        public void onReceive(Object msg) throws Exception {
+            store((String) msg);
+        }
+    }
+
+    // A new input stream can be created with this custom actor as
+    JavaStreamingContext jssc = ...;
+    JavaDStream<String> lines = AkkaUtils.<String>createStream(jssc, Props.create(CustomActor.class), "CustomReceiver");
+
+See end-to-end examples at [Akka Examples](https://github.com/apache/bahir/tree/master/streaming-akka/examples)
diff --git a/site/docs/spark/2.1.3/spark-streaming-mqtt.md b/site/docs/spark/2.1.3/spark-streaming-mqtt.md
new file mode 100644
index 0000000..f4eecd4
--- /dev/null
+++ b/site/docs/spark/2.1.3/spark-streaming-mqtt.md
@@ -0,0 +1,116 @@
+---
+layout: page
+title: Spark Structured Streaming MQTT
+description: Spark Structured Streaming MQTT
+group: nav-right
+---
+<!--
+{% comment %}
+Licensed to the Apache Software Foundation (ASF) under one or more
+contributor license agreements.  See the NOTICE file distributed with
+this work for additional information regarding copyright ownership.
+The ASF licenses this file to you under the Apache License, Version 2.0
+(the "License"); you may not use this file except in compliance with
+the License.  You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+{% endcomment %}
+-->
+
+{% include JB/setup %}
+
+
+[MQTT](http://mqtt.org/) is MQTT is a machine-to-machine (M2M)/"Internet of Things" connectivity protocol. It was designed as an extremely lightweight publish/subscribe messaging transport. It is useful for connections with remote locations where a small code footprint is required and/or network bandwidth is at a premium.
+
+## Linking
+
+Using SBT:
+
+    libraryDependencies += "org.apache.bahir" %% "spark-streaming-mqtt" % "2.1.3"
+
+Using Maven:
+
+    <dependency>
+        <groupId>org.apache.bahir</groupId>
+        <artifactId>spark-streaming-mqtt_2.11</artifactId>
+        <version>2.1.3</version>
+    </dependency>
+
+This library can also be added to Spark jobs launched through `spark-shell` or `spark-submit` by using the `--packages` command line option.
+For example, to include it when starting the spark shell:
+
+    $ bin/spark-shell --packages org.apache.bahir:spark-streaming-mqtt_2.11:2.1.3
+
+Unlike using `--jars`, using `--packages` ensures that this library and its dependencies will be added to the classpath.
+The `--packages` argument can also be used with `bin/spark-submit`.
+
+This library is cross-published for Scala 2.10 and Scala 2.11, so users should replace the proper Scala version (2.10 or 2.11) in the commands listed above.
+
+## Configuration options.
+
+This source uses the [Eclipse Paho Java Client](https://eclipse.org/paho/clients/java/). Client API documentation is located [here](http://www.eclipse.org/paho/files/javadoc/index.html).
+
+ * `brokerUrl` A url MqttClient connects to. Set this as the url of the Mqtt Server. e.g. tcp://localhost:1883.
+ * `storageLevel` By default it is used for storing incoming messages on disk.
+ * `topic` Topic MqttClient subscribes to.
+ * `topics` List of topics MqttClient subscribes to.
+ * `clientId` clientId, this client is assoicated with. Provide the same value to recover a stopped client.
+ * `QoS` The maximum quality of service to subscribe each topic at. Messages published at a lower quality of service will be received at the published QoS. Messages published at a higher quality of service will be received using the QoS specified on the subscribe.
+ * `username` Sets the user name to use for the connection to Mqtt Server. Do not set it, if server does not need this. Setting it empty will lead to errors.
+ * `password` Sets the password to use for the connection.
+ * `cleanSession` Setting it true starts a clean session, removes all checkpointed messages by a previous run of this source. This is set to false by default.
+ * `connectionTimeout` Sets the connection timeout, a value of 0 is interpreted as wait until client connects. See `MqttConnectOptions.setConnectionTimeout` for more information.
+ * `keepAlive` Same as `MqttConnectOptions.setKeepAliveInterval`.
+ * `mqttVersion` Same as `MqttConnectOptions.setMqttVersion`.
+
+
+## Examples
+
+### Scala API
+
+You need to extend `ActorReceiver` so as to store received data into Spark using `store(...)` methods. The supervisor strategy of
+this actor can be configured to handle failures, etc.
+
+    val lines = MQTTUtils.createStream(ssc, brokerUrl, topic)
+    val lines = MQTTUtils.createPairedStream(ssc, brokerUrl, topic)
+    val lines = MQTTUtils.createPairedByteArrayStream(ssc, brokerUrl, topic)
+
+Additional mqtt connection options can be provided:
+
+```Scala
+val lines = MQTTUtils.createStream(ssc, brokerUrl, topic, storageLevel, clientId, username, password, cleanSession, qos, connectionTimeout, keepAliveInterval, mqttVersion)
+val lines = MQTTUtils.createPairedStream(ssc, brokerUrl, topics, storageLevel, clientId, username, password, cleanSession, qos, connectionTimeout, keepAliveInterval, mqttVersion)
+val lines = MQTTUtils.createPairedByteArrayStream(ssc, brokerUrl, topics, storageLevel, clientId, username, password, cleanSession, qos, connectionTimeout, keepAliveInterval, mqttVersion)
+```
+
+### Java API
+
+You need to extend `JavaActorReceiver` so as to store received data into Spark using `store(...)` methods. The supervisor strategy of
+this actor can be configured to handle failures, etc.
+
+    JavaDStream<String> lines = MQTTUtils.createStream(jssc, brokerUrl, topic);
+    JavaReceiverInputDStream<Tuple2<String, String>> lines = MQTTUtils.createPairedStream(jssc, brokerUrl, topics);
+    JavaReceiverInputDStream<Tuple2<String, String>> lines = MQTTUtils.createPairedByteArrayStream(jssc, brokerUrl, topics);
+
+See end-to-end examples at [MQTT Examples](https://github.com/apache/bahir/tree/master/streaming-mqtt/examples)
+
+
+### Python API
+
+Create a DStream from a single topic.
+
+```Python
+	MQTTUtils.createStream(ssc, broker_url, topic)
+```
+
+Create a DStream from a list of topics.
+
+```Python
+	MQTTUtils.createPairedStream(ssc, broker_url, topics)
+```
\ No newline at end of file
diff --git a/site/docs/spark/2.1.3/spark-streaming-pubsub.md b/site/docs/spark/2.1.3/spark-streaming-pubsub.md
new file mode 100644
index 0000000..e490519
--- /dev/null
+++ b/site/docs/spark/2.1.3/spark-streaming-pubsub.md
@@ -0,0 +1,96 @@
+---
+layout: page
+title: Spark Streaming Google Pub-Sub
+description: Spark Streaming Google Pub-Sub
+group: nav-right
+---
+<!--
+{% comment %}
+Licensed to the Apache Software Foundation (ASF) under one or more
+contributor license agreements.  See the NOTICE file distributed with
+this work for additional information regarding copyright ownership.
+The ASF licenses this file to you under the Apache License, Version 2.0
+(the "License"); you may not use this file except in compliance with
+the License.  You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+{% endcomment %}
+-->
+
+{% include JB/setup %}
+A library for reading data from [Google Cloud Pub/Sub](https://cloud.google.com/pubsub/) using Spark Streaming.
+
+## Linking
+
+Using SBT:
+
+    libraryDependencies += "org.apache.bahir" %% "spark-streaming-pubsub" % "2.1.3"
+
+Using Maven:
+
+    <dependency>
+        <groupId>org.apache.bahir</groupId>
+        <artifactId>spark-streaming-pubsub_2.11</artifactId>
+        <version>2.1.3</version>
+    </dependency>
+
+This library can also be added to Spark jobs launched through `spark-shell` or `spark-submit` by using the `--packages` command line option.
+For example, to include it when starting the spark shell:
+
+    $ bin/spark-shell --packages org.apache.bahir:spark-streaming-pubsub_2.11:2.1.3
+
+Unlike using `--jars`, using `--packages` ensures that this library and its dependencies will be added to the classpath.
+The `--packages` argument can also be used with `bin/spark-submit`.
+
+## Examples
+
+First you need to create credential by SparkGCPCredentials, it support four type of credentials
+* application default
+    `SparkGCPCredentials.builder.build()`
+* json type service account
+    `SparkGCPCredentials.builder.jsonServiceAccount(PATH_TO_JSON_KEY).build()`
+* p12 type service account
+    `SparkGCPCredentials.builder.p12ServiceAccount(PATH_TO_P12_KEY, EMAIL_ACCOUNT).build()`
+* metadata service account(running on dataproc)
+    `SparkGCPCredentials.builder.metadataServiceAccount().build()`
+
+### Scala API
+
+    val lines = PubsubUtils.createStream(ssc, projectId, subscriptionName, credential, ..)
+
+### Java API
+
+    JavaDStream<SparkPubsubMessage> lines = PubsubUtils.createStream(jssc, projectId, subscriptionName, credential...)
+
+See end-to-end examples at [Google Cloud Pubsub Examples](streaming-pubsub/examples)
+
+### Unit Test
+
+To run the PubSub test cases, you need to generate **Google API service account key files** and set the corresponding environment variable to enable the test.
+
+#### To generate a service account key file with PubSub permission
+
+1. Go to [Google API Console](console.cloud.google.com)
+2. Choose the `Credentials` Tab> `Create credentials` button> `Service account key`
+3. Fill the account name, assign `Role> Pub/Sub> Pub/Sub Editor` and check the option `Furnish a private key` to create one. You need to create one for JSON key file, another for P12.
+4. The account email is the `Service account ID`
+
+#### Setting the environment variables and run test
+
+```
+mvn clean package -DskipTests -pl streaming-pubsub
+
+export ENABLE_PUBSUB_TESTS=1
+export GCP_TEST_ACCOUNT="THE_P12_SERVICE_ACCOUNT_ID_MENTIONED_ABOVE"
+export GCP_TEST_PROJECT_ID="YOUR_GCP_PROJECT_ID"
+export GCP_TEST_JSON_KEY_PATH=/path/to/pubsub/credential/files/Apache-Bahir-PubSub-1234abcd.json
+export GCP_TEST_P12_KEY_PATH=/path/to/pubsub/credential/files/Apache-Bahir-PubSub-5678efgh.p12
+
+mvn test -pl streaming-pubsub
+```
diff --git a/site/docs/spark/2.1.3/spark-streaming-twitter.md b/site/docs/spark/2.1.3/spark-streaming-twitter.md
new file mode 100644
index 0000000..d2957e2
--- /dev/null
+++ b/site/docs/spark/2.1.3/spark-streaming-twitter.md
@@ -0,0 +1,74 @@
+---
+layout: page
+title: Spark Streaming Twitter
+description: Spark Streaming Twitter
+group: nav-right
+---
+<!--
+{% comment %}
+Licensed to the Apache Software Foundation (ASF) under one or more
+contributor license agreements.  See the NOTICE file distributed with
+this work for additional information regarding copyright ownership.
+The ASF licenses this file to you under the Apache License, Version 2.0
+(the "License"); you may not use this file except in compliance with
+the License.  You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+{% endcomment %}
+-->
+
+{% include JB/setup %}
+
+A library for reading social data from [twitter](http://twitter.com/) using Spark Streaming.
+
+## Linking
+
+Using SBT:
+
+    libraryDependencies += "org.apache.bahir" %% "spark-streaming-twitter" % "2.1.3"
+
+Using Maven:
+
+    <dependency>
+        <groupId>org.apache.bahir</groupId>
+        <artifactId>spark-streaming-twitter_2.11</artifactId>
+        <version>2.1.3</version>
+    </dependency>
+
+This library can also be added to Spark jobs launched through `spark-shell` or `spark-submit` by using the `--packages` command line option.
+For example, to include it when starting the spark shell:
+
+    $ bin/spark-shell --packages org.apache.bahir:spark-streaming-twitter_2.11:2.1.3
+
+Unlike using `--jars`, using `--packages` ensures that this library and its dependencies will be added to the classpath.
+The `--packages` argument can also be used with `bin/spark-submit`.
+
+This library is cross-published for Scala 2.10 and Scala 2.11, so users should replace the proper Scala version (2.10 or 2.11) in the commands listed above.
+
+
+## Examples
+
+`TwitterUtils` uses Twitter4j to get the public stream of tweets using [Twitter's Streaming API](https://dev.twitter.com/docs/streaming-apis). Authentication information
+can be provided by any of the [methods](http://twitter4j.org/en/configuration.html) supported by Twitter4J library. You can import the `TwitterUtils` class and create a DStream with `TwitterUtils.createStream` as shown below.
+
+### Scala API
+
+    import org.apache.spark.streaming.twitter._
+
+    TwitterUtils.createStream(ssc, None)
+
+### Java API
+
+    import org.apache.spark.streaming.twitter.*;
+
+    TwitterUtils.createStream(jssc);
+
+
+You can also either get the public stream, or get the filtered stream based on keywords.
+See end-to-end examples at [Twitter Examples](https://github.com/apache/bahir/tree/master/streaming-twitter/examples)
\ No newline at end of file
diff --git a/site/docs/spark/2.1.3/spark-streaming-zeromq.md b/site/docs/spark/2.1.3/spark-streaming-zeromq.md
new file mode 100644
index 0000000..ccbd6ae
--- /dev/null
+++ b/site/docs/spark/2.1.3/spark-streaming-zeromq.md
@@ -0,0 +1,65 @@
+---
+layout: page
+title: Spark Streaming ZeroMQ
+description: Spark Streaming ZeroMQ
+group: nav-right
+---
+<!--
+{% comment %}
+Licensed to the Apache Software Foundation (ASF) under one or more
+contributor license agreements.  See the NOTICE file distributed with
+this work for additional information regarding copyright ownership.
+The ASF licenses this file to you under the Apache License, Version 2.0
+(the "License"); you may not use this file except in compliance with
+the License.  You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+{% endcomment %}
+-->
+
+{% include JB/setup %}
+
+A library for reading data from [ZeroMQ](http://zeromq.org/) using Spark Streaming.
+
+## Linking
+
+Using SBT:
+
+    libraryDependencies += "org.apache.bahir" %% "spark-streaming-zeromq" % "2.1.3"
+
+Using Maven:
+
+    <dependency>
+        <groupId>org.apache.bahir</groupId>
+        <artifactId>spark-streaming-zeromq_2.11</artifactId>
+        <version>2.1.3</version>
+    </dependency>
+
+This library can also be added to Spark jobs launched through `spark-shell` or `spark-submit` by using the `--packages` command line option.
+For example, to include it when starting the spark shell:
+
+    $ bin/spark-shell --packages org.apache.bahir:spark-streaming-zeromq_2.11:2.1.3
+
+Unlike using `--jars`, using `--packages` ensures that this library and its dependencies will be added to the classpath.
+The `--packages` argument can also be used with `bin/spark-submit`.
+
+This library is cross-published for Scala 2.10 and Scala 2.11, so users should replace the proper Scala version (2.10 or 2.11) in the commands listed above.
+
+## Examples
+
+
+### Scala API
+
+    val lines = ZeroMQUtils.createStream(ssc, ...)
+
+### Java API
+
+    JavaDStream<String> lines = ZeroMQUtils.createStream(jssc, ...);
+
+See end-to-end examples at [ZeroMQ Examples](https://github.com/apache/bahir/tree/master/streaming-zeromq/examples)
\ No newline at end of file
diff --git a/site/docs/spark/2.2.0/documentation.md b/site/docs/spark/2.2.0/documentation.md
index 22130db..09e47f5 100644
--- a/site/docs/spark/2.2.0/documentation.md
+++ b/site/docs/spark/2.2.0/documentation.md
@@ -31,13 +31,13 @@
 
 #### SQL  Data Sources
 
-[Apache CouchDB/Cloudant data source](../spark-sql-cloudant) ![](/assets/themes/apache-clean/img/new-black.png){:height="36px" width="36px"}
+[Apache CouchDB/Cloudant data source](../spark-sql-cloudant)
 
 <br/>
 
 #### Structured Streaming Data Sources
 
-[Akka data source](../spark-sql-streaming-akka) ![](/assets/themes/apache-clean/img/new-black.png){:height="36px" width="36px"}
+[Akka data source](../spark-sql-streaming-akka)
 
 [MQTT data source](../spark-sql-streaming-mqtt)
 
@@ -45,11 +45,11 @@
 
 #### Discretized Streams (DStreams) Connectors
 
-[Apache CouchDB/Cloudant connector](../spark-sql-cloudant) ![](/assets/themes/apache-clean/img/new-black.png){:height="36px" width="36px"}
+[Apache CouchDB/Cloudant connector](../spark-sql-cloudant)
 
 [Akka connector](../spark-streaming-akka)
 
-[Google Cloud Pub/Sub connector](../spark-streaming-pubsub) ![](/assets/themes/apache-clean/img/new-black.png){:height="36px" width="36px"}
+[Google Cloud Pub/Sub connector](../spark-streaming-pubsub)
 
 [MQTT connector](../spark-streaming-mqtt)
 
diff --git a/site/docs/spark/2.2.1/documentation.md b/site/docs/spark/2.2.1/documentation.md
index 6cd15df..932b390 100644
--- a/site/docs/spark/2.2.1/documentation.md
+++ b/site/docs/spark/2.2.1/documentation.md
@@ -31,13 +31,13 @@
 
 #### SQL  Data Sources
 
-[Apache CouchDB/Cloudant data source](../spark-sql-cloudant) ![](/assets/themes/apache-clean/img/new-black.png){:height="36px" width="36px"}
+[Apache CouchDB/Cloudant data source](../spark-sql-cloudant)
 
 <br/>
 
 #### Structured Streaming Data Sources
 
-[Akka data source](../spark-sql-streaming-akka) ![](/assets/themes/apache-clean/img/new-black.png){:height="36px" width="36px"}
+[Akka data source](../spark-sql-streaming-akka)
 
 [MQTT data source](../spark-sql-streaming-mqtt)
 
@@ -45,11 +45,11 @@
 
 #### Discretized Streams (DStreams) Connectors
 
-[Apache CouchDB/Cloudant connector](../spark-sql-cloudant) ![](/assets/themes/apache-clean/img/new-black.png){:height="36px" width="36px"}
+[Apache CouchDB/Cloudant connector](../spark-sql-cloudant)
 
 [Akka connector](../spark-streaming-akka)
 
-[Google Cloud Pub/Sub connector](../spark-streaming-pubsub) ![](/assets/themes/apache-clean/img/new-black.png){:height="36px" width="36px"}
+[Google Cloud Pub/Sub connector](../spark-streaming-pubsub)
 
 [MQTT connector](../spark-streaming-mqtt)
 
diff --git a/site/docs/spark/2.2.2/documentation.md b/site/docs/spark/2.2.2/documentation.md
new file mode 100644
index 0000000..932b390
--- /dev/null
+++ b/site/docs/spark/2.2.2/documentation.md
@@ -0,0 +1,58 @@
+---
+layout: page
+title: Extensions for Apache Spark
+description: Extensions for Apache Spark
+group: nav-right
+---
+<!--
+{% comment %}
+Licensed to the Apache Software Foundation (ASF) under one or more
+contributor license agreements.  See the NOTICE file distributed with
+this work for additional information regarding copyright ownership.
+The ASF licenses this file to you under the Apache License, Version 2.0
+(the "License"); you may not use this file except in compliance with
+the License.  You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+{% endcomment %}
+-->
+
+{% include JB/setup %}
+
+### Apache Bahir Extensions for Apache Spark
+
+<br/>
+
+#### SQL  Data Sources
+
+[Apache CouchDB/Cloudant data source](../spark-sql-cloudant)
+
+<br/>
+
+#### Structured Streaming Data Sources
+
+[Akka data source](../spark-sql-streaming-akka)
+
+[MQTT data source](../spark-sql-streaming-mqtt)
+
+<br/>
+
+#### Discretized Streams (DStreams) Connectors
+
+[Apache CouchDB/Cloudant connector](../spark-sql-cloudant)
+
+[Akka connector](../spark-streaming-akka)
+
+[Google Cloud Pub/Sub connector](../spark-streaming-pubsub)
+
+[MQTT connector](../spark-streaming-mqtt)
+
+[Twitter connector](../spark-streaming-twitter)
+
+[ZeroMQ connector](../spark-streaming-zeromq)
diff --git a/site/docs/spark/2.2.2/spark-sql-cloudant.md b/site/docs/spark/2.2.2/spark-sql-cloudant.md
new file mode 100644
index 0000000..b06bf13
--- /dev/null
+++ b/site/docs/spark/2.2.2/spark-sql-cloudant.md
@@ -0,0 +1,343 @@
+---
+layout: page
+title: Spark Data Source for Apache CouchDB/Cloudant
+description: Spark Data Source for Apache CouchDB/Cloudant
+group: nav-right
+---
+<!--
+{% comment %}
+Licensed to the Apache Software Foundation (ASF) under one or more
+contributor license agreements.  See the NOTICE file distributed with
+this work for additional information regarding copyright ownership.
+The ASF licenses this file to you under the Apache License, Version 2.0
+(the "License"); you may not use this file except in compliance with
+the License.  You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+{% endcomment %}
+-->
+
+{% include JB/setup %}
+A library for reading data from Cloudant or CouchDB databases using Spark SQL and Spark Streaming.
+
+[IBM® Cloudant®](https://cloudant.com) is a document-oriented DataBase as a Service (DBaaS). It stores data as documents
+in JSON format. It's built with scalability, high availability, and durability in mind. It comes with a
+wide variety of indexing options including map-reduce, Cloudant Query, full-text indexing, and
+geospatial indexing. The replication capabilities make it easy to keep data in sync between database
+clusters, desktop PCs, and mobile devices.
+
+[Apache CouchDB™](http://couchdb.apache.org) is open source database software that focuses on ease of use and having an architecture that "completely embraces the Web". It has a document-oriented NoSQL database architecture and is implemented in the concurrency-oriented language Erlang; it uses JSON to store data, JavaScript as its query language using MapReduce, and HTTP for an API.
+
+## Linking
+
+Using SBT:
+
+    libraryDependencies += "org.apache.bahir" %% "spark-sql-cloudant" % "2.2.2"
+
+Using Maven:
+
+    <dependency>
+        <groupId>org.apache.bahir</groupId>
+        <artifactId>spark-sql-cloudant_2.11</artifactId>
+        <version>2.2.2</version>
+    </dependency>
+
+This library can also be added to Spark jobs launched through `spark-shell` or `spark-submit` by using the `--packages` command line option.
+
+    $ bin/spark-shell --packages org.apache.bahir:spark-sql-cloudant_2.11:2.2.2
+
+Unlike using `--jars`, using `--packages` ensures that this library and its dependencies will be added to the classpath.
+The `--packages` argument can also be used with `bin/spark-submit`.
+
+Submit a job in Python:
+
+    spark-submit  --master local[4] --packages org.apache.bahir:spark-sql-cloudant_2.11:2.2.2  <path to python script>
+
+Submit a job in Scala:
+
+	spark-submit --class "<your class>" --master local[4] --packages org.apache.bahir:spark-sql-cloudant_2.11:2.2.2 <path to spark-sql-cloudant jar>
+
+This library is compiled for Scala 2.11 only, and intends to support Spark 2.0 onwards.
+
+## Configuration options
+The configuration is obtained in the following sequence:
+
+1. default in the Config, which is set in the application.conf
+2. key in the SparkConf, which is set in SparkConf
+3. key in the parameters, which is set in a dataframe or temporaty table options
+4. "spark."+key in the SparkConf (as they are treated as the one passed in through spark-submit using --conf option)
+
+Here each subsequent configuration overrides the previous one. Thus, configuration set using DataFrame option overrides what has beens set in SparkConf. And configuration passed in spark-submit using --conf takes precedence over any setting in the code.
+
+
+### Configuration in application.conf
+Default values are defined in [here](src/main/resources/application.conf).
+
+### Configuration on SparkConf
+
+Name | Default | Meaning
+--- |:---:| ---
+cloudant.batchInterval|8|number of seconds to set for streaming all documents from `_changes` endpoint into Spark dataframe.  See [Setting the right batch interval](https://spark.apache.org/docs/latest/streaming-programming-guide.html#setting-the-right-batch-interval) for tuning this value.
+cloudant.endpoint|`_all_docs`|endpoint for RelationProvider when loading data from Cloudant to DataFrames or SQL temporary tables. Select between the Cloudant `_all_docs` or `_changes` API endpoint.  See **Note** below for differences between endpoints.
+cloudant.protocol|https|protocol to use to transfer data: http or https
+cloudant.host| |cloudant host url
+cloudant.username| |cloudant userid
+cloudant.password| |cloudant password
+cloudant.numberOfRetries|3| number of times to replay a request that received a 429 `Too Many Requests` response
+cloudant.useQuery|false|by default, `_all_docs` endpoint is used if configuration 'view' and 'index' (see below) are not set. When useQuery is enabled, `_find` endpoint will be used in place of `_all_docs` when query condition is not on primary key field (_id), so that query predicates may be driven into datastore.
+cloudant.queryLimit|25|the maximum number of results returned when querying the `_find` endpoint.
+cloudant.storageLevel|MEMORY_ONLY|the storage level for persisting Spark RDDs during load when `cloudant.endpoint` is set to `_changes`.  See [RDD Persistence section](https://spark.apache.org/docs/latest/programming-guide.html#rdd-persistence) in Spark's Progamming Guide for all available storage level options.
+cloudant.timeout|60000|stop the response after waiting the defined number of milliseconds for data.  Only supported with `changes` endpoint.
+jsonstore.rdd.partitions|10|the number of partitions intent used to drive JsonStoreRDD loading query result in parallel. The actual number is calculated based on total rows returned and satisfying maxInPartition and minInPartition. Only supported with `_all_docs` endpoint.
+jsonstore.rdd.maxInPartition|-1|the max rows in a partition. -1 means unlimited
+jsonstore.rdd.minInPartition|10|the min rows in a partition.
+jsonstore.rdd.requestTimeout|900000|the request timeout in milliseconds
+bulkSize|200|the bulk save size
+schemaSampleSize|-1|the sample size for RDD schema discovery. 1 means we are using only the first document for schema discovery; -1 means all documents; 0 will be treated as 1; any number N means min(N, total) docs. Only supported with `_all_docs` endpoint.
+createDBOnSave|false|whether to create a new database during save operation. If false, a database should already exist. If true, a new database will be created. If true, and a database with a provided name already exists, an error will be raised.
+
+The `cloudant.endpoint` option sets ` _changes` or `_all_docs` API endpoint to be called while loading Cloudant data into Spark DataFrames or SQL Tables.
+
+**Note:** When using `_changes` API, please consider:
+1. Results are partially ordered and may not be be presented in order in
+which documents were updated.
+2. In case of shards' unavailability, you may see duplicate results (changes that have been seen already)
+3. Can use `selector` option to filter Cloudant docs during load
+4. Supports a real snapshot of the database and represents it in a single point of time.
+5. Only supports a single partition.
+
+
+When using `_all_docs` API:
+1. Supports parallel reads (using offset and range) and partitioning.
+2. Using partitions may not represent the true snapshot of a database.  Some docs
+   may be added or deleted in the database between loading data into different
+   Spark partitions.
+
+If loading Cloudant docs from a database greater than 100 MB, set `cloudant.endpoint` to `_changes` and `spark.streaming.unpersist` to `false`.
+This will enable RDD persistence during load against `_changes` endpoint and allow the persisted RDDs to be accessible after streaming completes.  
+
+See [CloudantChangesDFSuite](src/test/scala/org/apache/bahir/cloudant/CloudantChangesDFSuite.scala)
+for examples of loading data into a Spark DataFrame with `_changes` API.
+
+### Configuration on Spark SQL Temporary Table or DataFrame
+
+Besides all the configurations passed to a temporary table or dataframe through SparkConf, it is also possible to set the following configurations in temporary table or dataframe using OPTIONS:
+
+Name | Default | Meaning
+--- |:---:| ---
+bulkSize|200| the bulk save size
+createDBOnSave|false| whether to create a new database during save operation. If false, a database should already exist. If true, a new database will be created. If true, and a database with a provided name already exists, an error will be raised.
+database| | Cloudant database name
+index| | Cloudant Search index without the database name. Search index queries are limited to returning 200 results so can only be used to load data with <= 200 results.
+path| | Cloudant: as database name if database is not present
+schemaSampleSize|-1| the sample size used to discover the schema for this temp table. -1 scans all documents
+selector|all documents| a selector written in Cloudant Query syntax, specifying conditions for selecting documents when the `cloudant.endpoint` option is set to `_changes`. Only documents satisfying the selector's conditions will be retrieved from Cloudant and loaded into Spark.
+view| | Cloudant view w/o the database name. only used for load.
+
+For fast loading, views are loaded without include_docs. Thus, a derived schema will always be: `{id, key, value}`, where `value `can be a compount field. An example of loading data from a view:
+
+```python
+spark.sql(" CREATE TEMPORARY TABLE flightTable1 USING org.apache.bahir.cloudant OPTIONS ( database 'n_flight', view '_design/view/_view/AA0')")
+
+```
+
+### Configuration on Cloudant Receiver for Spark Streaming
+
+Name | Default | Meaning
+--- |:---:| ---
+cloudant.host||cloudant host url
+cloudant.username||cloudant userid
+cloudant.password||cloudant password
+database||cloudant database name
+selector| all documents| a selector written in Cloudant Query syntax, specifying conditions for selecting documents. Only documents satisfying the selector's conditions will be retrieved from Cloudant and loaded into Spark.
+
+### Configuration in spark-submit using --conf option
+
+The above stated configuration keys can also be set using `spark-submit --conf` option. When passing configuration in spark-submit, make sure adding "spark." as prefix to the keys.
+
+
+## Examples
+
+### Python API
+
+#### Using SQL In Python
+
+```python
+spark = SparkSession\
+    .builder\
+    .appName("Cloudant Spark SQL Example in Python using temp tables")\
+    .config("cloudant.host","ACCOUNT.cloudant.com")\
+    .config("cloudant.username", "USERNAME")\
+    .config("cloudant.password","PASSWORD")\
+    .getOrCreate()
+
+
+# Loading temp table from Cloudant db
+spark.sql(" CREATE TEMPORARY TABLE airportTable USING org.apache.bahir.cloudant OPTIONS ( database 'n_airportcodemapping')")
+airportData = spark.sql("SELECT _id, airportName FROM airportTable WHERE _id >= 'CAA' AND _id <= 'GAA' ORDER BY _id")
+airportData.printSchema()
+print 'Total # of rows in airportData: ' + str(airportData.count())
+for code in airportData.collect():
+    print code._id
+```
+
+See [CloudantApp.py](examples/python/CloudantApp.py) for examples.
+
+Submit job example:
+```
+spark-submit  --packages org.apache.bahir:spark-sql-cloudant_2.11:2.2.2 --conf spark.cloudant.host=ACCOUNT.cloudant.com --conf spark.cloudant.username=USERNAME --conf spark.cloudant.password=PASSWORD sql-cloudant/examples/python/CloudantApp.py
+```
+
+#### Using DataFrame In Python
+
+```python
+spark = SparkSession\
+    .builder\
+    .appName("Cloudant Spark SQL Example in Python using dataframes")\
+    .config("cloudant.host","ACCOUNT.cloudant.com")\
+    .config("cloudant.username", "USERNAME")\
+    .config("cloudant.password","PASSWORD")\
+    .config("jsonstore.rdd.partitions", 8)\
+    .getOrCreate()
+
+# ***1. Loading dataframe from Cloudant db
+df = spark.read.load("n_airportcodemapping", "org.apache.bahir.cloudant")
+df.cache()
+df.printSchema()
+df.filter(df.airportName >= 'Moscow').select("_id",'airportName').show()
+df.filter(df._id >= 'CAA').select("_id",'airportName').show()	    
+```
+
+See [CloudantDF.py](examples/python/CloudantDF.py) for examples.
+
+In case of doing multiple operations on a dataframe (select, filter etc.),
+you should persist a dataframe. Otherwise, every operation on a dataframe will load the same data from Cloudant again.
+Persisting will also speed up computation. This statement will persist an RDD in memory: `df.cache()`.  Alternatively for large dbs to persist in memory & disk, use:
+
+```python
+from pyspark import StorageLevel
+df.persist(storageLevel = StorageLevel(True, True, False, True, 1))
+```
+
+[Sample code](examples/python/CloudantDFOption.py) on using DataFrame option to define cloudant configuration
+
+### Scala API
+
+#### Using SQL In Scala
+
+```scala
+val spark = SparkSession
+      .builder()
+      .appName("Cloudant Spark SQL Example")
+      .config("cloudant.host","ACCOUNT.cloudant.com")
+      .config("cloudant.username", "USERNAME")
+      .config("cloudant.password","PASSWORD")
+      .getOrCreate()
+
+// For implicit conversions of Dataframe to RDDs
+import spark.implicits._
+
+// create a temp table from Cloudant db and query it using sql syntax
+spark.sql(
+    s"""
+    |CREATE TEMPORARY TABLE airportTable
+    |USING org.apache.bahir.cloudant
+    |OPTIONS ( database 'n_airportcodemapping')
+    """.stripMargin)
+// create a dataframe
+val airportData = spark.sql("SELECT _id, airportName FROM airportTable WHERE _id >= 'CAA' AND _id <= 'GAA' ORDER BY _id")
+airportData.printSchema()
+println(s"Total # of rows in airportData: " + airportData.count())
+// convert dataframe to array of Rows, and process each row
+airportData.map(t => "code: " + t(0) + ",name:" + t(1)).collect().foreach(println)
+```
+See [CloudantApp.scala](examples/scala/src/main/scala/mytest/spark/CloudantApp.scala) for examples.
+
+Submit job example:
+```
+spark-submit --class org.apache.spark.examples.sql.cloudant.CloudantApp --packages org.apache.bahir:spark-sql-cloudant_2.11:2.2.2 --conf spark.cloudant.host=ACCOUNT.cloudant.com --conf spark.cloudant.username=USERNAME --conf spark.cloudant.password=PASSWORD  /path/to/spark-sql-cloudant_2.11-2.2.2-tests.jar
+```
+
+### Using DataFrame In Scala
+
+```scala
+val spark = SparkSession
+      .builder()
+      .appName("Cloudant Spark SQL Example with Dataframe")
+      .config("cloudant.host","ACCOUNT.cloudant.com")
+      .config("cloudant.username", "USERNAME")
+      .config("cloudant.password","PASSWORD")
+      .config("createDBOnSave","true") // to create a db on save
+      .config("jsonstore.rdd.partitions", "20") // using 20 partitions
+      .getOrCreate()
+
+// 1. Loading data from Cloudant db
+val df = spark.read.format("org.apache.bahir.cloudant").load("n_flight")
+// Caching df in memory to speed computations
+// and not to retrieve data from cloudant again
+df.cache()
+df.printSchema()
+
+// 2. Saving dataframe to Cloudant db
+val df2 = df.filter(df("flightSegmentId") === "AA106")
+    .select("flightSegmentId","economyClassBaseCost")
+df2.show()
+df2.write.format("org.apache.bahir.cloudant").save("n_flight2")
+```
+
+See [CloudantDF.scala](examples/scala/src/main/scala/mytest/spark/CloudantDF.scala) for examples.
+
+[Sample code](examples/scala/src/main/scala/mytest/spark/CloudantDFOption.scala) on using DataFrame option to define Cloudant configuration.
+
+
+### Using Streams In Scala
+
+```scala
+val ssc = new StreamingContext(sparkConf, Seconds(10))
+val changes = ssc.receiverStream(new CloudantReceiver(Map(
+  "cloudant.host" -> "ACCOUNT.cloudant.com",
+  "cloudant.username" -> "USERNAME",
+  "cloudant.password" -> "PASSWORD",
+  "database" -> "n_airportcodemapping")))
+
+changes.foreachRDD((rdd: RDD[String], time: Time) => {
+  // Get the singleton instance of SparkSession
+  val spark = SparkSessionSingleton.getInstance(rdd.sparkContext.getConf)
+
+  println(s"========= $time =========")
+  // Convert RDD[String] to DataFrame
+  val changesDataFrame = spark.read.json(rdd)
+  if (!changesDataFrame.schema.isEmpty) {
+    changesDataFrame.printSchema()
+    changesDataFrame.select("*").show()
+    ....
+  }
+})
+ssc.start()
+// run streaming for 120 secs
+Thread.sleep(120000L)
+ssc.stop(true)
+
+```
+
+See [CloudantStreaming.scala](examples/scala/src/main/scala/mytest/spark/CloudantStreaming.scala) for examples.
+
+By default, Spark Streaming will load all documents from a database. If you want to limit the loading to
+specific documents, use `selector` option of `CloudantReceiver` and specify your conditions
+(See [CloudantStreamingSelector.scala](examples/scala/src/main/scala/mytest/spark/CloudantStreamingSelector.scala)
+example for more details):
+
+```scala
+val changes = ssc.receiverStream(new CloudantReceiver(Map(
+  "cloudant.host" -> "ACCOUNT.cloudant.com",
+  "cloudant.username" -> "USERNAME",
+  "cloudant.password" -> "PASSWORD",
+  "database" -> "sales",
+  "selector" -> "{\"month\":\"May\", \"rep\":\"John\"}")))
+```
diff --git a/site/docs/spark/2.2.2/spark-sql-streaming-akka.md b/site/docs/spark/2.2.2/spark-sql-streaming-akka.md
new file mode 100644
index 0000000..ae0fcea
--- /dev/null
+++ b/site/docs/spark/2.2.2/spark-sql-streaming-akka.md
@@ -0,0 +1,137 @@
+---
+layout: page
+title: Spark Structured Streaming Akka
+description: Spark Structured Streaming Akka
+group: nav-right
+---
+<!--
+{% comment %}
+Licensed to the Apache Software Foundation (ASF) under one or more
+contributor license agreements.  See the NOTICE file distributed with
+this work for additional information regarding copyright ownership.
+The ASF licenses this file to you under the Apache License, Version 2.0
+(the "License"); you may not use this file except in compliance with
+the License.  You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+{% endcomment %}
+-->
+
+{% include JB/setup %}
+A library for reading data from Akka Actors using Spark SQL Streaming ( or Structured streaming.).
+
+## Linking
+
+Using SBT:
+
+    libraryDependencies += "org.apache.bahir" %% "spark-sql-streaming-akka" % "2.2.2"
+
+Using Maven:
+
+    <dependency>
+        <groupId>org.apache.bahir</groupId>
+        <artifactId>spark-sql-streaming-akka_2.11</artifactId>
+        <version>2.2.2</version>
+    </dependency>
+
+This library can also be added to Spark jobs launched through `spark-shell` or `spark-submit` by using the `--packages` command line option.
+For example, to include it when starting the spark shell:
+
+    $ bin/spark-shell --packages org.apache.bahir:spark-sql-streaming-akka_2.11:2.2.2
+
+Unlike using `--jars`, using `--packages` ensures that this library and its dependencies will be added to the classpath.
+The `--packages` argument can also be used with `bin/spark-submit`.
+
+This library is compiled for Scala 2.11 only, and intends to support Spark 2.0 onwards.
+
+## Examples
+
+A SQL Stream can be created with data streams received from Akka Feeder actor using,
+
+        sqlContext.readStream
+                .format("org.apache.bahir.sql.streaming.akka.AkkaStreamSourceProvider")
+                .option("urlOfPublisher", "feederActorUri")
+                .load()
+
+## Enable recovering from failures.
+
+Setting values for option `persistenceDirPath` helps in recovering in case of a restart, by restoring the state where it left off before the shutdown.
+
+        sqlContext.readStream
+                .format("org.apache.bahir.sql.streaming.akka.AkkaStreamSourceProvider")
+                .option("urlOfPublisher", "feederActorUri")
+                .option("persistenceDirPath", "/path/to/localdir")
+                .load()
+
+## Configuration options.
+
+This source uses [Akka Actor api](http://doc.akka.io/api/akka/2.4/akka/actor/Actor.html).
+
+* `urlOfPublisher` The url of Publisher or Feeder actor that the Receiver actor connects to. Set this as the tcp url of the Publisher or Feeder actor.
+* `persistenceDirPath` By default it is used for storing incoming messages on disk.
+
+### Scala API
+
+An example, for scala API to count words from incoming message stream.
+
+        // Create DataFrame representing the stream of input lines from connection
+        // to publisher or feeder actor
+        val lines = spark.readStream
+                    .format("org.apache.bahir.sql.streaming.akka.AkkaStreamSourceProvider")
+                    .option("urlOfPublisher", urlOfPublisher)
+                    .load().as[(String, Timestamp)]
+
+        // Split the lines into words
+        val words = lines.map(_._1).flatMap(_.split(" "))
+
+        // Generate running word count
+        val wordCounts = words.groupBy("value").count()
+
+        // Start running the query that prints the running counts to the console
+        val query = wordCounts.writeStream
+                    .outputMode("complete")
+                    .format("console")
+                    .start()
+
+        query.awaitTermination()
+
+Please see `AkkaStreamWordCount.scala` for full example.     
+
+### Java API
+
+An example, for Java API to count words from incoming message stream.
+
+        // Create DataFrame representing the stream of input lines from connection
+        // to publisher or feeder actor
+        Dataset<String> lines = spark
+                                .readStream()
+                                .format("org.apache.bahir.sql.streaming.akka.AkkaStreamSourceProvider")
+                                .option("urlOfPublisher", urlOfPublisher)
+                                .load().select("value").as(Encoders.STRING());
+
+        // Split the lines into words
+        Dataset<String> words = lines.flatMap(new FlatMapFunction<String, String>() {
+          @Override
+          public Iterator<String> call(String s) throws Exception {
+            return Arrays.asList(s.split(" ")).iterator();
+          }
+        }, Encoders.STRING());
+
+        // Generate running word count
+        Dataset<Row> wordCounts = words.groupBy("value").count();
+
+        // Start running the query that prints the running counts to the console
+        StreamingQuery query = wordCounts.writeStream()
+                                .outputMode("complete")
+                                .format("console")
+                                .start();
+
+        query.awaitTermination();   
+
+Please see `JavaAkkaStreamWordCount.java` for full example.      
diff --git a/site/docs/spark/2.2.2/spark-sql-streaming-mqtt.md b/site/docs/spark/2.2.2/spark-sql-streaming-mqtt.md
new file mode 100644
index 0000000..8fc9591
--- /dev/null
+++ b/site/docs/spark/2.2.2/spark-sql-streaming-mqtt.md
@@ -0,0 +1,147 @@
+---
+layout: page
+title: Spark Structured Streaming MQTT
+description: Spark Structured Streaming MQTT
+group: nav-right
+---
+<!--
+{% comment %}
+Licensed to the Apache Software Foundation (ASF) under one or more
+contributor license agreements.  See the NOTICE file distributed with
+this work for additional information regarding copyright ownership.
+The ASF licenses this file to you under the Apache License, Version 2.0
+(the "License"); you may not use this file except in compliance with
+the License.  You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+{% endcomment %}
+-->
+
+{% include JB/setup %}
+
+A library for reading data from MQTT Servers using Spark SQL Streaming ( or Structured streaming.).
+
+## Linking
+
+Using SBT:
+
+    libraryDependencies += "org.apache.bahir" %% "spark-sql-streaming-mqtt" % "2.2.2"
+
+Using Maven:
+
+    <dependency>
+        <groupId>org.apache.bahir</groupId>
+        <artifactId>spark-sql-streaming-mqtt_2.11</artifactId>
+        <version>2.2.2</version>
+    </dependency>
+
+This library can also be added to Spark jobs launched through `spark-shell` or `spark-submit` by using the `--packages` command line option.
+For example, to include it when starting the spark shell:
+
+    $ bin/spark-shell --packages org.apache.bahir:spark-sql-streaming-mqtt_2.11:2.2.2
+
+Unlike using `--jars`, using `--packages` ensures that this library and its dependencies will be added to the classpath.
+The `--packages` argument can also be used with `bin/spark-submit`.
+
+This library is compiled for Scala 2.11 only, and intends to support Spark 2.0 onwards.
+
+## Examples
+
+A SQL Stream can be created with data streams received through MQTT Server using,
+
+    sqlContext.readStream
+        .format("org.apache.bahir.sql.streaming.mqtt.MQTTStreamSourceProvider")
+        .option("topic", "mytopic")
+        .load("tcp://localhost:1883")
+
+## Enable recovering from failures.
+
+Setting values for option `localStorage` and `clientId` helps in recovering in case of a restart, by restoring the state where it left off before the shutdown.
+
+    sqlContext.readStream
+        .format("org.apache.bahir.sql.streaming.mqtt.MQTTStreamSourceProvider")
+        .option("topic", "mytopic")
+        .option("localStorage", "/path/to/localdir")
+        .option("clientId", "some-client-id")
+        .load("tcp://localhost:1883")
+
+## Configuration options.
+
+This source uses [Eclipse Paho Java Client](https://eclipse.org/paho/clients/java/). Client API documentation is located [here](http://www.eclipse.org/paho/files/javadoc/index.html).
+
+ * `brokerUrl` A url MqttClient connects to. Set this or `path` as the url of the Mqtt Server. e.g. tcp://localhost:1883.
+ * `persistence` By default it is used for storing incoming messages on disk. If `memory` is provided as value for this option, then recovery on restart is not supported.
+ * `topic` Topic MqttClient subscribes to.
+ * `clientId` clientId, this client is assoicated with. Provide the same value to recover a stopped client.
+ * `QoS` The maximum quality of service to subscribe each topic at. Messages published at a lower quality of service will be received at the published QoS. Messages published at a higher quality of service will be received using the QoS specified on the subscribe.
+ * `username` Sets the user name to use for the connection to Mqtt Server. Do not set it, if server does not need this. Setting it empty will lead to errors.
+ * `password` Sets the password to use for the connection.
+ * `cleanSession` Setting it true starts a clean session, removes all checkpointed messages by a previous run of this source. This is set to false by default.
+ * `connectionTimeout` Sets the connection timeout, a value of 0 is interpretted as wait until client connects. See `MqttConnectOptions.setConnectionTimeout` for more information.
+ * `keepAlive` Same as `MqttConnectOptions.setKeepAliveInterval`.
+ * `mqttVersion` Same as `MqttConnectOptions.setMqttVersion`.
+
+### Scala API
+
+An example, for scala API to count words from incoming message stream.
+
+    // Create DataFrame representing the stream of input lines from connection to mqtt server
+    val lines = spark.readStream
+      .format("org.apache.bahir.sql.streaming.mqtt.MQTTStreamSourceProvider")
+      .option("topic", topic)
+      .load(brokerUrl).as[(String, Timestamp)]
+
+    // Split the lines into words
+    val words = lines.map(_._1).flatMap(_.split(" "))
+
+    // Generate running word count
+    val wordCounts = words.groupBy("value").count()
+
+    // Start running the query that prints the running counts to the console
+    val query = wordCounts.writeStream
+      .outputMode("complete")
+      .format("console")
+      .start()
+
+    query.awaitTermination()
+
+Please see `MQTTStreamWordCount.scala` for full example.
+
+### Java API
+
+An example, for Java API to count words from incoming message stream.
+
+    // Create DataFrame representing the stream of input lines from connection to mqtt server.
+    Dataset<String> lines = spark
+            .readStream()
+            .format("org.apache.bahir.sql.streaming.mqtt.MQTTStreamSourceProvider")
+            .option("topic", topic)
+            .load(brokerUrl).select("value").as(Encoders.STRING());
+
+    // Split the lines into words
+    Dataset<String> words = lines.flatMap(new FlatMapFunction<String, String>() {
+        @Override
+        public Iterator<String> call(String x) {
+            return Arrays.asList(x.split(" ")).iterator();
+        }
+    }, Encoders.STRING());
+
+    // Generate running word count
+    Dataset<Row> wordCounts = words.groupBy("value").count();
+
+    // Start running the query that prints the running counts to the console
+    StreamingQuery query = wordCounts.writeStream()
+            .outputMode("complete")
+            .format("console")
+            .start();
+
+    query.awaitTermination();
+
+Please see `JavaMQTTStreamWordCount.java` for full example.
+
diff --git a/site/docs/spark/2.2.2/spark-streaming-akka.md b/site/docs/spark/2.2.2/spark-streaming-akka.md
new file mode 100644
index 0000000..3ea5ea2
--- /dev/null
+++ b/site/docs/spark/2.2.2/spark-streaming-akka.md
@@ -0,0 +1,89 @@
+---
+layout: page
+title: Spark Streaming Akka
+description: Spark Streaming Akka
+group: nav-right
+---
+<!--
+{% comment %}
+Licensed to the Apache Software Foundation (ASF) under one or more
+contributor license agreements.  See the NOTICE file distributed with
+this work for additional information regarding copyright ownership.
+The ASF licenses this file to you under the Apache License, Version 2.0
+(the "License"); you may not use this file except in compliance with
+the License.  You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+{% endcomment %}
+-->
+
+{% include JB/setup %}
+
+A library for reading data from Akka Actors using Spark Streaming.
+
+## Linking
+
+Using SBT:
+
+    libraryDependencies += "org.apache.bahir" %% "spark-streaming-akka" % "2.2.2"
+
+Using Maven:
+
+    <dependency>
+        <groupId>org.apache.bahir</groupId>
+        <artifactId>spark-streaming-akka_2.11</artifactId>
+        <version>2.2.2</version>
+    </dependency>
+
+This library can also be added to Spark jobs launched through `spark-shell` or `spark-submit` by using the `--packages` command line option.
+For example, to include it when starting the spark shell:
+
+    $ bin/spark-shell --packages org.apache.bahir:spark-streaming-akka_2.11:2.2.2
+
+Unlike using `--jars`, using `--packages` ensures that this library and its dependencies will be added to the classpath.
+The `--packages` argument can also be used with `bin/spark-submit`.
+
+This library is cross-published for Scala 2.10 and Scala 2.11, so users should replace the proper Scala version (2.10 or 2.11) in the commands listed above.
+
+## Examples
+
+DStreams can be created with data streams received through Akka actors by using `AkkaUtils.createStream(ssc, actorProps, actor-name)`.
+
+### Scala API
+
+You need to extend `ActorReceiver` so as to store received data into Spark using `store(...)` methods. The supervisor strategy of
+this actor can be configured to handle failures, etc.
+
+    class CustomActor extends ActorReceiver {
+      def receive = {
+        case data: String => store(data)
+      }
+    }
+
+    // A new input stream can be created with this custom actor as
+    val ssc: StreamingContext = ...
+    val lines = AkkaUtils.createStream[String](ssc, Props[CustomActor](), "CustomReceiver")
+
+### Java API
+
+You need to extend `JavaActorReceiver` so as to store received data into Spark using `store(...)` methods. The supervisor strategy of
+this actor can be configured to handle failures, etc.
+
+    class CustomActor extends JavaActorReceiver {
+        @Override
+        public void onReceive(Object msg) throws Exception {
+            store((String) msg);
+        }
+    }
+
+    // A new input stream can be created with this custom actor as
+    JavaStreamingContext jssc = ...;
+    JavaDStream<String> lines = AkkaUtils.<String>createStream(jssc, Props.create(CustomActor.class), "CustomReceiver");
+
+See end-to-end examples at [Akka Examples](https://github.com/apache/bahir/tree/master/streaming-akka/examples)
diff --git a/site/docs/spark/2.2.2/spark-streaming-mqtt.md b/site/docs/spark/2.2.2/spark-streaming-mqtt.md
new file mode 100644
index 0000000..55052ef
--- /dev/null
+++ b/site/docs/spark/2.2.2/spark-streaming-mqtt.md
@@ -0,0 +1,116 @@
+---
+layout: page
+title: Spark Structured Streaming MQTT
+description: Spark Structured Streaming MQTT
+group: nav-right
+---
+<!--
+{% comment %}
+Licensed to the Apache Software Foundation (ASF) under one or more
+contributor license agreements.  See the NOTICE file distributed with
+this work for additional information regarding copyright ownership.
+The ASF licenses this file to you under the Apache License, Version 2.0
+(the "License"); you may not use this file except in compliance with
+the License.  You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+{% endcomment %}
+-->
+
+{% include JB/setup %}
+
+
+[MQTT](http://mqtt.org/) is MQTT is a machine-to-machine (M2M)/"Internet of Things" connectivity protocol. It was designed as an extremely lightweight publish/subscribe messaging transport. It is useful for connections with remote locations where a small code footprint is required and/or network bandwidth is at a premium.
+
+## Linking
+
+Using SBT:
+
+    libraryDependencies += "org.apache.bahir" %% "spark-streaming-mqtt" % "2.2.2"
+
+Using Maven:
+
+    <dependency>
+        <groupId>org.apache.bahir</groupId>
+        <artifactId>spark-streaming-mqtt_2.11</artifactId>
+        <version>2.2.2</version>
+    </dependency>
+
+This library can also be added to Spark jobs launched through `spark-shell` or `spark-submit` by using the `--packages` command line option.
+For example, to include it when starting the spark shell:
+
+    $ bin/spark-shell --packages org.apache.bahir:spark-streaming-mqtt_2.11:2.2.2
+
+Unlike using `--jars`, using `--packages` ensures that this library and its dependencies will be added to the classpath.
+The `--packages` argument can also be used with `bin/spark-submit`.
+
+This library is cross-published for Scala 2.10 and Scala 2.11, so users should replace the proper Scala version (2.10 or 2.11) in the commands listed above.
+
+## Configuration options.
+
+This source uses the [Eclipse Paho Java Client](https://eclipse.org/paho/clients/java/). Client API documentation is located [here](http://www.eclipse.org/paho/files/javadoc/index.html).
+
+ * `brokerUrl` A url MqttClient connects to. Set this as the url of the Mqtt Server. e.g. tcp://localhost:1883.
+ * `storageLevel` By default it is used for storing incoming messages on disk.
+ * `topic` Topic MqttClient subscribes to.
+ * `topics` List of topics MqttClient subscribes to.
+ * `clientId` clientId, this client is assoicated with. Provide the same value to recover a stopped client.
+ * `QoS` The maximum quality of service to subscribe each topic at. Messages published at a lower quality of service will be received at the published QoS. Messages published at a higher quality of service will be received using the QoS specified on the subscribe.
+ * `username` Sets the user name to use for the connection to Mqtt Server. Do not set it, if server does not need this. Setting it empty will lead to errors.
+ * `password` Sets the password to use for the connection.
+ * `cleanSession` Setting it true starts a clean session, removes all checkpointed messages by a previous run of this source. This is set to false by default.
+ * `connectionTimeout` Sets the connection timeout, a value of 0 is interpreted as wait until client connects. See `MqttConnectOptions.setConnectionTimeout` for more information.
+ * `keepAlive` Same as `MqttConnectOptions.setKeepAliveInterval`.
+ * `mqttVersion` Same as `MqttConnectOptions.setMqttVersion`.
+
+
+## Examples
+
+### Scala API
+
+You need to extend `ActorReceiver` so as to store received data into Spark using `store(...)` methods. The supervisor strategy of
+this actor can be configured to handle failures, etc.
+
+    val lines = MQTTUtils.createStream(ssc, brokerUrl, topic)
+    val lines = MQTTUtils.createPairedStream(ssc, brokerUrl, topic)
+    val lines = MQTTUtils.createPairedByteArrayStream(ssc, brokerUrl, topic)
+
+Additional mqtt connection options can be provided:
+
+```Scala
+val lines = MQTTUtils.createStream(ssc, brokerUrl, topic, storageLevel, clientId, username, password, cleanSession, qos, connectionTimeout, keepAliveInterval, mqttVersion)
+val lines = MQTTUtils.createPairedStream(ssc, brokerUrl, topics, storageLevel, clientId, username, password, cleanSession, qos, connectionTimeout, keepAliveInterval, mqttVersion)
+val lines = MQTTUtils.createPairedByteArrayStream(ssc, brokerUrl, topics, storageLevel, clientId, username, password, cleanSession, qos, connectionTimeout, keepAliveInterval, mqttVersion)
+```
+
+### Java API
+
+You need to extend `JavaActorReceiver` so as to store received data into Spark using `store(...)` methods. The supervisor strategy of
+this actor can be configured to handle failures, etc.
+
+    JavaDStream<String> lines = MQTTUtils.createStream(jssc, brokerUrl, topic);
+    JavaReceiverInputDStream<Tuple2<String, String>> lines = MQTTUtils.createPairedStream(jssc, brokerUrl, topics);
+    JavaReceiverInputDStream<Tuple2<String, String>> lines = MQTTUtils.createPairedByteArrayStream(jssc, brokerUrl, topics);
+
+See end-to-end examples at [MQTT Examples](https://github.com/apache/bahir/tree/master/streaming-mqtt/examples)
+
+
+### Python API
+
+Create a DStream from a single topic.
+
+```Python
+	MQTTUtils.createStream(ssc, broker_url, topic)
+```
+
+Create a DStream from a list of topics.
+
+```Python
+	MQTTUtils.createPairedStream(ssc, broker_url, topics)
+```
\ No newline at end of file
diff --git a/site/docs/spark/2.2.2/spark-streaming-pubsub.md b/site/docs/spark/2.2.2/spark-streaming-pubsub.md
new file mode 100644
index 0000000..ac477a6
--- /dev/null
+++ b/site/docs/spark/2.2.2/spark-streaming-pubsub.md
@@ -0,0 +1,96 @@
+---
+layout: page
+title: Spark Streaming Google Pub-Sub
+description: Spark Streaming Google Pub-Sub
+group: nav-right
+---
+<!--
+{% comment %}
+Licensed to the Apache Software Foundation (ASF) under one or more
+contributor license agreements.  See the NOTICE file distributed with
+this work for additional information regarding copyright ownership.
+The ASF licenses this file to you under the Apache License, Version 2.0
+(the "License"); you may not use this file except in compliance with
+the License.  You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+{% endcomment %}
+-->
+
+{% include JB/setup %}
+A library for reading data from [Google Cloud Pub/Sub](https://cloud.google.com/pubsub/) using Spark Streaming.
+
+## Linking
+
+Using SBT:
+
+    libraryDependencies += "org.apache.bahir" %% "spark-streaming-pubsub" % "2.2.2"
+
+Using Maven:
+
+    <dependency>
+        <groupId>org.apache.bahir</groupId>
+        <artifactId>spark-streaming-pubsub_2.11</artifactId>
+        <version>2.2.2</version>
+    </dependency>
+
+This library can also be added to Spark jobs launched through `spark-shell` or `spark-submit` by using the `--packages` command line option.
+For example, to include it when starting the spark shell:
+
+    $ bin/spark-shell --packages org.apache.bahir:spark-streaming-pubsub_2.11:2.2.2
+
+Unlike using `--jars`, using `--packages` ensures that this library and its dependencies will be added to the classpath.
+The `--packages` argument can also be used with `bin/spark-submit`.
+
+## Examples
+
+First you need to create credential by SparkGCPCredentials, it support four type of credentials
+* application default
+    `SparkGCPCredentials.builder.build()`
+* json type service account
+    `SparkGCPCredentials.builder.jsonServiceAccount(PATH_TO_JSON_KEY).build()`
+* p12 type service account
+    `SparkGCPCredentials.builder.p12ServiceAccount(PATH_TO_P12_KEY, EMAIL_ACCOUNT).build()`
+* metadata service account(running on dataproc)
+    `SparkGCPCredentials.builder.metadataServiceAccount().build()`
+
+### Scala API
+
+    val lines = PubsubUtils.createStream(ssc, projectId, subscriptionName, credential, ..)
+
+### Java API
+
+    JavaDStream<SparkPubsubMessage> lines = PubsubUtils.createStream(jssc, projectId, subscriptionName, credential...)
+
+See end-to-end examples at [Google Cloud Pubsub Examples](streaming-pubsub/examples)
+
+### Unit Test
+
+To run the PubSub test cases, you need to generate **Google API service account key files** and set the corresponding environment variable to enable the test.
+
+#### To generate a service account key file with PubSub permission
+
+1. Go to [Google API Console](console.cloud.google.com)
+2. Choose the `Credentials` Tab> `Create credentials` button> `Service account key`
+3. Fill the account name, assign `Role> Pub/Sub> Pub/Sub Editor` and check the option `Furnish a private key` to create one. You need to create one for JSON key file, another for P12.
+4. The account email is the `Service account ID`
+
+#### Setting the environment variables and run test
+
+```
+mvn clean package -DskipTests -pl streaming-pubsub
+
+export ENABLE_PUBSUB_TESTS=1
+export GCP_TEST_ACCOUNT="THE_P12_SERVICE_ACCOUNT_ID_MENTIONED_ABOVE"
+export GCP_TEST_PROJECT_ID="YOUR_GCP_PROJECT_ID"
+export GCP_TEST_JSON_KEY_PATH=/path/to/pubsub/credential/files/Apache-Bahir-PubSub-1234abcd.json
+export GCP_TEST_P12_KEY_PATH=/path/to/pubsub/credential/files/Apache-Bahir-PubSub-5678efgh.p12
+
+mvn test -pl streaming-pubsub
+```
diff --git a/site/docs/spark/2.2.2/spark-streaming-twitter.md b/site/docs/spark/2.2.2/spark-streaming-twitter.md
new file mode 100644
index 0000000..a6bb42f
--- /dev/null
+++ b/site/docs/spark/2.2.2/spark-streaming-twitter.md
@@ -0,0 +1,74 @@
+---
+layout: page
+title: Spark Streaming Twitter
+description: Spark Streaming Twitter
+group: nav-right
+---
+<!--
+{% comment %}
+Licensed to the Apache Software Foundation (ASF) under one or more
+contributor license agreements.  See the NOTICE file distributed with
+this work for additional information regarding copyright ownership.
+The ASF licenses this file to you under the Apache License, Version 2.0
+(the "License"); you may not use this file except in compliance with
+the License.  You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+{% endcomment %}
+-->
+
+{% include JB/setup %}
+
+A library for reading social data from [twitter](http://twitter.com/) using Spark Streaming.
+
+## Linking
+
+Using SBT:
+
+    libraryDependencies += "org.apache.bahir" %% "spark-streaming-twitter" % "2.2.2"
+
+Using Maven:
+
+    <dependency>
+        <groupId>org.apache.bahir</groupId>
+        <artifactId>spark-streaming-twitter_2.11</artifactId>
+        <version>2.2.2</version>
+    </dependency>
+
+This library can also be added to Spark jobs launched through `spark-shell` or `spark-submit` by using the `--packages` command line option.
+For example, to include it when starting the spark shell:
+
+    $ bin/spark-shell --packages org.apache.bahir:spark-streaming-twitter_2.11:2.2.2
+
+Unlike using `--jars`, using `--packages` ensures that this library and its dependencies will be added to the classpath.
+The `--packages` argument can also be used with `bin/spark-submit`.
+
+This library is cross-published for Scala 2.10 and Scala 2.11, so users should replace the proper Scala version (2.10 or 2.11) in the commands listed above.
+
+
+## Examples
+
+`TwitterUtils` uses Twitter4j to get the public stream of tweets using [Twitter's Streaming API](https://dev.twitter.com/docs/streaming-apis). Authentication information
+can be provided by any of the [methods](http://twitter4j.org/en/configuration.html) supported by Twitter4J library. You can import the `TwitterUtils` class and create a DStream with `TwitterUtils.createStream` as shown below.
+
+### Scala API
+
+    import org.apache.spark.streaming.twitter._
+
+    TwitterUtils.createStream(ssc, None)
+
+### Java API
+
+    import org.apache.spark.streaming.twitter.*;
+
+    TwitterUtils.createStream(jssc);
+
+
+You can also either get the public stream, or get the filtered stream based on keywords.
+See end-to-end examples at [Twitter Examples](https://github.com/apache/bahir/tree/master/streaming-twitter/examples)
\ No newline at end of file
diff --git a/site/docs/spark/2.2.2/spark-streaming-zeromq.md b/site/docs/spark/2.2.2/spark-streaming-zeromq.md
new file mode 100644
index 0000000..ece9b3d
--- /dev/null
+++ b/site/docs/spark/2.2.2/spark-streaming-zeromq.md
@@ -0,0 +1,65 @@
+---
+layout: page
+title: Spark Streaming ZeroMQ
+description: Spark Streaming ZeroMQ
+group: nav-right
+---
+<!--
+{% comment %}
+Licensed to the Apache Software Foundation (ASF) under one or more
+contributor license agreements.  See the NOTICE file distributed with
+this work for additional information regarding copyright ownership.
+The ASF licenses this file to you under the Apache License, Version 2.0
+(the "License"); you may not use this file except in compliance with
+the License.  You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+{% endcomment %}
+-->
+
+{% include JB/setup %}
+
+A library for reading data from [ZeroMQ](http://zeromq.org/) using Spark Streaming.
+
+## Linking
+
+Using SBT:
+
+    libraryDependencies += "org.apache.bahir" %% "spark-streaming-zeromq" % "2.2.2"
+
+Using Maven:
+
+    <dependency>
+        <groupId>org.apache.bahir</groupId>
+        <artifactId>spark-streaming-zeromq_2.11</artifactId>
+        <version>2.2.2</version>
+    </dependency>
+
+This library can also be added to Spark jobs launched through `spark-shell` or `spark-submit` by using the `--packages` command line option.
+For example, to include it when starting the spark shell:
+
+    $ bin/spark-shell --packages org.apache.bahir:spark-streaming-zeromq_2.11:2.2.2
+
+Unlike using `--jars`, using `--packages` ensures that this library and its dependencies will be added to the classpath.
+The `--packages` argument can also be used with `bin/spark-submit`.
+
+This library is cross-published for Scala 2.10 and Scala 2.11, so users should replace the proper Scala version (2.10 or 2.11) in the commands listed above.
+
+## Examples
+
+
+### Scala API
+
+    val lines = ZeroMQUtils.createStream(ssc, ...)
+
+### Java API
+
+    JavaDStream<String> lines = ZeroMQUtils.createStream(jssc, ...);
+
+See end-to-end examples at [ZeroMQ Examples](https://github.com/apache/bahir/tree/master/streaming-zeromq/examples)
\ No newline at end of file
diff --git a/site/docs/spark/current/documentation.md b/site/docs/spark/current/documentation.md
index 6cd15df..932b390 100644
--- a/site/docs/spark/current/documentation.md
+++ b/site/docs/spark/current/documentation.md
@@ -31,13 +31,13 @@
 
 #### SQL  Data Sources
 
-[Apache CouchDB/Cloudant data source](../spark-sql-cloudant) ![](/assets/themes/apache-clean/img/new-black.png){:height="36px" width="36px"}
+[Apache CouchDB/Cloudant data source](../spark-sql-cloudant)
 
 <br/>
 
 #### Structured Streaming Data Sources
 
-[Akka data source](../spark-sql-streaming-akka) ![](/assets/themes/apache-clean/img/new-black.png){:height="36px" width="36px"}
+[Akka data source](../spark-sql-streaming-akka)
 
 [MQTT data source](../spark-sql-streaming-mqtt)
 
@@ -45,11 +45,11 @@
 
 #### Discretized Streams (DStreams) Connectors
 
-[Apache CouchDB/Cloudant connector](../spark-sql-cloudant) ![](/assets/themes/apache-clean/img/new-black.png){:height="36px" width="36px"}
+[Apache CouchDB/Cloudant connector](../spark-sql-cloudant)
 
 [Akka connector](../spark-streaming-akka)
 
-[Google Cloud Pub/Sub connector](../spark-streaming-pubsub) ![](/assets/themes/apache-clean/img/new-black.png){:height="36px" width="36px"}
+[Google Cloud Pub/Sub connector](../spark-streaming-pubsub)
 
 [MQTT connector](../spark-streaming-mqtt)
 
diff --git a/site/docs/spark/overview.md b/site/docs/spark/overview.md
index 85679f0..4a2b6a6 100644
--- a/site/docs/spark/overview.md
+++ b/site/docs/spark/overview.md
@@ -28,8 +28,10 @@
 ### Apache Bahir Extensions for Apache Spark
 
  - [Current - 2.3.0-SNAPSHOT](/docs/spark/current/documentation)
+ - [2.2.2](/docs/spark/2.2.2/documentation)
  - [2.2.1](/docs/spark/2.2.1/documentation)
  - [2.2.0](/docs/spark/2.2.0/documentation)
+ - [2.1.3](/docs/spark/2.1.3/documentation)
  - [2.1.2](/docs/spark/2.1.2/documentation)
  - [2.1.1](/docs/spark/2.1.1/documentation)
  - [2.1.0](/docs/spark/2.1.0/documentation)
diff --git a/site/index.md b/site/index.md
index c5fd561..92b13cf 100644
--- a/site/index.md
+++ b/site/index.md
@@ -33,12 +33,12 @@
 
 ## Apache Spark extensions
 
- - Spark data source for Apache CouchDB/Cloudant ![](assets/themes/apache-clean/img/new-black.png){:height="36px" width="36px"}
- - Spark Structured Streaming data source for Akka ![](assets/themes/apache-clean/img/new-black.png){:height="36px" width="36px"}
+ - Spark data source for Apache CouchDB/Cloudant
+ - Spark Structured Streaming data source for Akka
  - Spark Structured Streaming data source for MQTT
- - Spark DStream connector for Apache CouchDB/Cloudant ![](assets/themes/apache-clean/img/new-black.png){:height="36px" width="36px"}
+ - Spark DStream connector for Apache CouchDB/Cloudant
  - Spark DStream connector for Akka
- - Spark DStream connector for Google Cloud Pub/Sub ![](assets/themes/apache-clean/img/new-black.png){:height="36px" width="36px"}
+ - Spark DStream connector for Google Cloud Pub/Sub
  - Spark DStream connector for MQTT
  - Spark DStream connector for Twitter
  - Spark DStream connector for ZeroMQ