<axisconfig name="AxisJava2.0">
    <!-- ================================================= -->
    <!-- Parameters -->
    <!-- ================================================= -->
    <parameter name="hotdeployment" locked="false">true</parameter>
    <parameter name="hotupdate" locked="false">false</parameter>
    <parameter name="enableMTOM" locked="false">false</parameter>
    <parameter name="enableSwA" locked="false">false</parameter>

    <!--Uncomment if you want to enable file caching for attachments -->
    <!--parameter name="cacheAttachments" locked="false">true</parameter>
    <parameter name="attachmentDIR" locked="false"></parameter>
    <parameter name="sizeThreshold" locked="false">4000</parameter-->

    <!--This will give out the timout of the configuration contexts, in seconds-->
    <parameter name="ConfigContextTimeoutInterval" locked="false">30</parameter>

    <!--During a fault, stacktrace can be sent with the fault message. The following flag will control -->
    <!--that behaviour.-->
    <parameter name="sendStacktraceDetailsWithFaults" locked="false">true</parameter>

    <!--If there aren't any information available to find out the fault reason, we set the message of the expcetion-->
    <!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be -->
    <!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag-->
    <!--is set then, Axis2 tries to get the first exception and set its message as the faultreason/Reason.-->
    <parameter name="DrillDownToRootCauseForFaultReason" locked="false">false</parameter>

    <parameter name="userName" locked="false">admin</parameter>
    <parameter name="password" locked="false">axis2</parameter>

    <!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context-->
    <!--root which can configured using the following contextRoot parameter-->
    <!--<parameter name="contextRoot" locked="false">axis2</parameter>-->

    <!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distingiush those endpoints-->
    <!--In case of a servlet, if you change this you have to manually change the settings of your servlet container to map this -->
    <!--context path to proper Axis2 servlets-->
    <!--<parameter name="servicePath" locked="false">services</parameter>-->
    <!--<parameter name="restPath" locked="false">rest</parameter>-->


    <!--Set the flag to true if you want to enable transport level session mangment-->
    <parameter name="manageTransportSession" locked="false">false</parameter>

    <!--Following two parameters will be used to handle REST in Axis2. The default settings will make Axis2 to have two-->
    <!--different endpoints, one for REST (AxisRESTServlet) one for SOAP message handling (AxisServlet). But following-->
    <!--parameters help to tweak the message handling of two main servlets. -->

    <!-- If the enableRESTInAxis2MainServlet is true, then Axis2MainServlet will handle both SOAP and REST messages -->
    <parameter name="enableRESTInAxis2MainServlet" locked="true">false</parameter>

    <!-- Following parameter will completely disable REST handling in both the servlets-->
    <parameter name="disableREST" locked="true">false</parameter>

    <!-- This will disable the separate servlet we have for REST handling. -->
    <parameter name="disableSeparateEndpointForREST" locked="true">false</parameter>

    <!-- If you have a frontend host which exposes this webservice using a different public URL  -->
    <!-- use this parameter to override autodetected url -->
    <!--<parameter name="httpFrontendHostUrl" locked="false">https://someotherhost/context</parameter>-->


    <!--    The way of adding listener to the system-->
    <!--    <listener class="org.apache.axis2.ObserverIMPL">-->
    <!--        <parameter name="RSS_URL" locked="false">http://127.0.0.1/rss</parameter>-->
    <!--    </listener>-->

    <!-- ================================================= -->
    <!-- Deployers -->
    <!-- ================================================= -->

    <!--Service deployer , this will alow users to deploy AAR or exploded AAR as axis2 services-->
    <deployer extension=".aar" directory="services" class="org.apache.axis2.deployment.ServiceDeployer">
        <serviceBuilderExtension name ="jwsbuilderExt" class="org.apache.axis2.jaxws.framework.JAXWSServiceBuilderExtension"/>
        <serviceBuilderExtension name ="wsdlbuilderExt" class="org.apache.axis2.deployment.WSDLServiceBuilderExtension"/>
    </deployer>
    
    <!-- ================================================= -->
    <!-- Message Receivers -->
    <!-- ================================================= -->
    <!--This is the Deafult Message Receiver for the system , if you want to have MessageReceivers for -->
    <!--all the other MEP implement it and add the correct entry to here , so that you can refer from-->
    <!--any operation -->
    <!--Note : You can ovride this for particular service by adding the same element with your requirement-->
    <messageReceivers>
        <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only"
                         class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
        <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out"
                         class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
    </messageReceivers>
    <!-- ================================================= -->
    <!-- Transport Ins -->
    <!-- ================================================= -->
    <!-- The default configuration assumes that AxisServlet only receives requests
         through HTTP. To allow HTTPS as well, configure a second AxisServletListener
         with name="https" and specify the port parameter on both receivers.
         For more information, please have a look at the servlet transport documentation:
         http://axis.apache.org/axis2/java/core/docs/servlet-transport.html -->
    <transportReceiver name="http"
                       class="org.apache.axis2.transport.http.AxisServletListener"/>
                       
    <transportReceiver name="https"
                       class="org.apache.axis2.transport.http.AxisServletListener"/>
    
    <!--Uncomment this and configure as appropriate for JMS transport support, after setting up your JMS environment (e.g. ActiveMQ)
    <transportReceiver name="jms" class="org.apache.axis2.transport.jms.JMSListener">
        <parameter name="myTopicConnectionFactory" locked="false">        	        	
        	<parameter name="java.naming.factory.initial" locked="false">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
        	<parameter name="java.naming.provider.url" locked="false">tcp://localhost:61616</parameter>        	
        	<parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">TopicConnectionFactory</parameter>
        </parameter>

        <parameter name="myQueueConnectionFactory" locked="false">        	        	
        	<parameter name="java.naming.factory.initial" locked="false">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
        	<parameter name="java.naming.provider.url" locked="false">tcp://localhost:61616</parameter>        	
        	<parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">QueueConnectionFactory</parameter>
        </parameter>

        <parameter name="default" locked="false">        	        	
        	<parameter name="java.naming.factory.initial" locked="false">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
        	<parameter name="java.naming.provider.url" locked="false">tcp://localhost:61616</parameter>        	
        	<parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">QueueConnectionFactory</parameter>
        </parameter>
    </transportReceiver>-->

    <!--Uncomment if you want to have SMTP transport support-->
    <!--<transportReceiver name="mail" class="org.apache.axis2.transport.mail.SimpleMailListener">-->
    <!--<parameter name="transport.mail.pop3.host" locked="false">127.0.0.1</parameter>-->
    <!--<parameter name="transport.mail.pop3.user" locked="false">axis2</parameter>-->
    <!--<parameter name="transport.mail.pop3.password" locked="false">axis2</parameter>-->
    <!--<parameter name="transport.mail.pop3.port" locked="false">110</parameter>-->
    <!--<parameter name="transport.mail.replyToAddress" locked="false">axis2@127.0.0.1</parameter>-->
    <!--</transportReceiver>-->

    <!-- ================================================= -->
    <!-- Transport Outs -->
    <!-- ================================================= -->

    <transportSender name="local"
                     class="org.apache.axis2.transport.local.LocalTransportSender"/>
    <transportSender name="http"
                     class="org.apache.axis2.transport.http.impl.httpclient4.HTTPClient4TransportSender">
        <parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
        <parameter name="Transfer-Encoding" locked="false">chunked</parameter>
    </transportSender>
    <transportSender name="https"
                     class="org.apache.axis2.transport.http.impl.httpclient4.HTTPClient4TransportSender">
        <parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
        <parameter name="Transfer-Encoding" locked="false">chunked</parameter>
    </transportSender>
    <!-- <transportSender name="jms"
                     class="org.apache.axis2.transport.jms.JMSSender"/> -->

    <!-- Uncomment this one with the appropriate papameters to enable the SMTP transport Receiver
   <transportSender name="mailto" class="org.apache.axis2.transport.mail.MailTransportSender">
       <parameter name="transport.mail.smtp.host" locked="false">127.0.0.1</parameter>
       <parameter name="transport.mail.smtp.user" locked="false">axis2</parameter>
       <parameter name="transport.mail.smtp.password" locked="false">axis2</parameter>
       <parameter name="transport.mail.smtp.port" locked="false">25</parameter>
   </transportSender>
   -->

    <!-- ================================================= -->
    <!-- Global Modules  -->
    <!-- ================================================= -->
    <!-- Comment this to disable Addressing 
    <module ref="addressing"/>
    -->
    
    <!--Configuring module , providing parameters for modules whether they refer or not-->
    <moduleConfig name="addressing">
        <parameter name="includeOptionalHeaders" locked="false">true</parameter>
    </moduleConfig>

    <!-- ================================================= -->
    <!-- Phases  -->
    <!-- ================================================= -->
<phaseOrder type="InFlow">
        <!--  System predefined phases       -->
        <phase name="Transport">
            <handler name="RequestURIBasedDispatcher"
                     class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher">
                <order phase="Transport"/>
            </handler>
            <handler name="SOAPActionBasedDispatcher"
                     class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher">
                <order phase="Transport"/>
            </handler>
        </phase>
        <phase name="Addressing">
             <handler name="AddressingBasedDispatcher"
                     class="org.apache.axis2.dispatchers.AddressingBasedDispatcher">
                 <order phase="Addressing"/>
            </handler>
        </phase>
        <phase name="Security"/>
        <phase name="PreDispatch"/>
        <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
            <handler name="RequestURIBasedDispatcher"
                     class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/>
            <handler name="SOAPActionBasedDispatcher"
                     class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/>
            <handler name="RequestURIOperationDispatcher"
                     class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/>
            <handler name="SOAPMessageBodyBasedDispatcher"
                     class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/>

            <handler name="HTTPLocationBasedDispatcher"
                     class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/>
        </phase>
        <phase name="RMPhase"/>
        <!--  System predefined phases       -->
        <!--   After Postdispatch phase module author or service author can add any phase he want      -->
        <phase name="OperationInPhase"/>
        <phase name="soapmonitorPhase"/>
    </phaseOrder>
    <phaseOrder type="OutFlow">
        <!--      user can add his own phases to this area  -->
        <phase name="soapmonitorPhase"/>
        <phase name="OperationOutPhase"/>
        <!--system predefined phase-->
        <!--these phase will run irrespective of the service-->
        <phase name="RMPhase"/>
        <phase name="PolicyDetermination"/>
        <phase name="MessageOut"/>
        <phase name="Security"/>
    </phaseOrder>
    <phaseOrder type="InFaultFlow">
        <phase name="Addressing">
             <handler name="AddressingBasedDispatcher"
                     class="org.apache.axis2.dispatchers.AddressingBasedDispatcher">
                 <order phase="Addressing"/>
            </handler>
        </phase>
        <phase name="Security"/>
        <phase name="PreDispatch"/>
        <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
            <handler name="RequestURIBasedDispatcher"
                     class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/>
            <handler name="SOAPActionBasedDispatcher"
                     class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/>
            <handler name="RequestURIOperationDispatcher"
                     class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/>
            <handler name="SOAPMessageBodyBasedDispatcher"
                     class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/>

            <handler name="HTTPLocationBasedDispatcher"
                     class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/>
        </phase>
        <phase name="RMPhase"/>
        <!--      user can add his own phases to this area  -->
        <phase name="OperationInFaultPhase"/>
        <phase name="soapmonitorPhase"/>
    </phaseOrder>
    <phaseOrder type="OutFaultFlow">
        <!--      user can add his own phases to this area  -->
        <phase name="soapmonitorPhase"/>
        <phase name="OperationOutFaultPhase"/>
        <phase name="RMPhase"/>
        <phase name="PolicyDetermination"/>
        <phase name="MessageOut"/>
        <phase name="Security"/>
    </phaseOrder>    
</axisconfig>