blob: eaaedaa262e2189a06398f070506ee74ce3532c7 [file] [log] [blame]
<!--
/*
* Copyright 2001-2004 The Apache Software Foundation.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
-->
<axisconfig name="AxisJava2.0">
<!-- ================================================= -->
<!-- Parameters -->
<!-- ================================================= -->
<parameter name="hotdeployment" locked="false">true</parameter>
<parameter name="hotupdate" locked="false">false</parameter>
<parameter name="enableMTOM" locked="false">false</parameter>
<parameter name="enableSwA" locked="false">false</parameter>
<!--Uncomment if you want to enable file caching for attachments -->
<!--parameter name="cacheAttachments" locked="false">true</parameter>
<parameter name="attachmentDIR" locked="false"></parameter>
<parameter name="sizeThreshold" locked="false">4000</parameter-->
<!--This will give out the timout of the configuration contexts, in seconds-->
<parameter name="ConfigContextTimeoutInterval" locked="false">30</parameter>
<!--During a fault, stacktrace can be sent with the fault message. The following flag will control -->
<!--that behaviour.-->
<parameter name="sendStacktraceDetailsWithFaults" locked="false">false</parameter>
<!--If there aren't any information available to find out the fault reason, we set the message of the expcetion-->
<!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be -->
<!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag-->
<!--is set then, Axis2 tries to get the first exception and set its message as the faultreason/Reason.-->
<parameter name="DrillDownToRootCauseForFaultReason" locked="false">false</parameter>
<parameter name="userName" locked="false">admin</parameter>
<parameter name="password" locked="false">axis2</parameter>
<!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.-->
<!--<parameter name="ServicesDirectory" locked="false">service</parameter>-->
<!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path-->
<!--<parameter name="ModulesDirectory" locked="false">modules</parameter>-->
<!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context-->
<!--root which can configured using the following contextRoot parameter-->
<!--<parameter name="contextRoot" locked="false">axis2</parameter>-->
<!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distingiush those endpoints-->
<!--In case of a servlet, if you change this you have to manually change the settings of your servlet container to map this -->
<!--context path to proper Axis2 servlets-->
<!--<parameter name="servicePath" locked="false">services</parameter>-->
<!--<parameter name="restPath" locked="false">rest</parameter>-->
<!--Set the flag to true if you want to enable transport level session mangment-->
<parameter name="manageTransportSession" locked="false">false</parameter>
<!--Following two parameters will be used to handle REST in Axis2. The default settings will make Axis2 to have two-->
<!--different endpoints, one for REST (AxisRESTServlet) one for SOAP message handling (AxisServlet). But following-->
<!--parameters help to tweak the message handling of two main servlets. -->
<!-- If the enableRESTInAxis2MainServlet is true, then Axis2MainServlet will handle both SOAP and REST messages -->
<parameter name="enableRESTInAxis2MainServlet" locked="true">false</parameter>
<!-- Following parameter will completely disable REST handling in both the servlets-->
<parameter name="disableREST" locked="true">false</parameter>
<!-- This will disable the separate servlet we have for REST handling. -->
<parameter name="disableSeparateEndpointForREST" locked="true">false</parameter>
<!-- If you have a frontend host which exposes this webservice using a different public URL -->
<!-- use this parameter to override autodetected url -->
<!--<parameter name="httpFrontendHostUrl" locked="false">https://someotherhost/context</parameter>-->
<!-- The way of adding listener to the system-->
<!-- <listener class="org.apache.axis2.ObserverIMPL">-->
<!-- <parameter name="RSS_URL" locked="false">http://127.0.0.1/rss</parameter>-->
<!-- </listener>-->
<!-- ================================================= -->
<!-- Message Receivers -->
<!-- ================================================= -->
<!--This is the Deafult Message Receiver for the system , if you want to have MessageReceivers for -->
<!--all the other MEP implement it and add the correct entry to here , so that you can refer from-->
<!--any operation -->
<!--Note : You can ovride this for particular service by adding the same element with your requirement-->
<messageReceivers>
<messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only"
class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver" />
<messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out"
class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver" />
</messageReceivers>
<!-- ================================================= -->
<!-- Transport Ins -->
<!-- ================================================= -->
<transportReceiver name="http"
class="org.apache.axis2.transport.http.SimpleHTTPServer">
<parameter name="port" locked="false">8080</parameter>
<!-- Here is the complete list of supported parameters (see example settings further below):
port: the port to listen on (default 6060)
hostname: if non-null, url prefix used in reply-to endpoint references (default null)
originServer: value of http Server header in outgoing messages (default "Simple-Server/1.1")
requestTimeout: value in millis of time that requests can wait for data (default 20000)
requestTcpNoDelay: true to maximize performance and minimize latency (default true)
false to minimize bandwidth consumption by combining segments
requestCoreThreadPoolSize: number of threads available for request processing (unless queue fills up) (default 25)
requestMaxThreadPoolSize: number of threads available for request processing if queue fills us (default 150)
note that default queue never fills up: see HttpFactory
threadKeepAliveTime: time to keep threads in excess of core size alive while inactive (default 180)
note that no such threads can exist with default unbounded request queue
threadKeepAliveTimeUnit: TimeUnit of value in threadKeepAliveTime (default SECONDS) (default SECONDS)
-->
<!-- <parameter name="hostname" locked="false">http://www.myApp.com/ws</parameter> -->
<!-- <parameter name="originServer" locked="false">My-Server/1.1</parameter> -->
<!-- <parameter name="requestTimeout" locked="false">10000</parameter> -->
<!-- <parameter name="requestTcpNoDelay" locked="false">false</parameter> -->
<!-- <parameter name="requestCoreThreadPoolSize" locked="false">50</parameter> -->
<!-- <parameter name="RequestMaxThreadPoolSize" locked="false">100</parameter> -->
<!-- <parameter name="threadKeepAliveTime" locked="false">240000</parameter> -->
<!-- <parameter name="threadKeepAliveTimeUnit" locked="false">MILLISECONDS</parameter> -->
</transportReceiver>
<!--Uncomment this and configure as appropriate for JMS transport support, after setting up your JMS environment (e.g. ActiveMQ)
<transportReceiver name="jms" class="org.apache.axis2.transport.jms.JMSListener">
<parameter name="myTopicConnectionFactory" locked="false">
<parameter name="java.naming.factory.initial" locked="false">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
<parameter name="java.naming.provider.url" locked="false">tcp://localhost:61616</parameter>
<parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">TopicConnectionFactory</parameter>
</parameter>
<parameter name="myQueueConnectionFactory" locked="false">
<parameter name="java.naming.factory.initial" locked="false">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
<parameter name="java.naming.provider.url" locked="false">tcp://localhost:61616</parameter>
<parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">QueueConnectionFactory</parameter>
</parameter>
<parameter name="default" locked="false">
<parameter name="java.naming.factory.initial" locked="false">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
<parameter name="java.naming.provider.url" locked="false">tcp://localhost:61616</parameter>
<parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">QueueConnectionFactory</parameter>
</parameter>
</transportReceiver>-->
<!--Uncomment if you want to have SMTP transport support-->
<!--<transportReceiver name="mail" class="org.apache.axis2.transport.mail.SimpleMailListener">-->
<!--<parameter name="transport.mail.pop3.host" locked="false">127.0.0.1</parameter>-->
<!--<parameter name="transport.mail.pop3.user" locked="false">axis2</parameter>-->
<!--<parameter name="transport.mail.pop3.password" locked="false">axis2</parameter>-->
<!--<parameter name="transport.mail.pop3.port" locked="false">110</parameter>-->
<!--<parameter name="transport.mail.replyToAddress" locked="false">axis2@127.0.0.1</parameter>-->
<!--</transportReceiver>-->
<!--Uncomment if you want to have TCP transport support-->
<!--transportReceiver name="tcp"
class="org.apache.axis2.transport.tcp.TCPServer">
<parameter name="port" locked="false">6060</parameter-->
>
<!--If you want to give your own host address for EPR generation-->
<!--uncommet following paramter , and set as you required.-->
<!--<parameter name="hostname" locked="false">tcp://myApp.com/ws</parameter>-->
<!-- /transportReceiver -->
<!-- ================================================= -->
<!-- Transport Outs -->
<!-- ================================================= -->
<transportSender name="tcp"
class="org.apache.axis2.transport.tcp.TCPTransportSender" />
<transportSender name="local"
class="org.apache.axis2.transport.local.LocalTransportSender" />
<transportSender name="http"
class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
<parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
<parameter name="Transfer-Encoding" locked="false">chunked</parameter>
</transportSender>
<transportSender name="https"
class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
<parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
<parameter name="Transfer-Encoding" locked="false">chunked</parameter>
</transportSender>
<!--Uncomment this and configure as appropriate for JMS transport support, after setting up your JMS environment (e.g. ActiveMQ)
<transportSender name="jms"
class="org.apache.axis2.transport.jms.JMSSender"/>
-->
<!-- Uncomment this one with the appropriate papameters to enable the SMTP transport Receiver
<transportSender name="mailto" class="org.apache.axis2.transport.mail.MailTransportSender">
<parameter name="transport.mail.smtp.host" locked="false">127.0.0.1</parameter>
<parameter name="transport.mail.smtp.user" locked="false">axis2</parameter>
<parameter name="transport.mail.smtp.password" locked="false">axis2</parameter>
<parameter name="transport.mail.smtp.port" locked="false">25</parameter>
</transportSender>
-->
<!-- ================================================= -->
<!-- Global Modules -->
<!-- ================================================= -->
<!-- Comment this to disable Addressing -->
<module ref="addressing" />
<module ref="kandula-outflow" />
<!--Configuring module , providing parameters for modules whether they refer or not-->
<!--<moduleConfig name="addressing">-->
<!--<parameter name="addressingPara" locked="false">N/A</parameter>-->
<!--</moduleConfig>-->
<!-- ================================================= -->
<!-- Phases -->
<!-- ================================================= -->
<phaseOrder type="InFlow">
<!-- System predefined phases -->
<phase name="Transport">
<handler name="RequestURIBasedDispatcher"
class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher">
<order phase="Transport"/>
</handler>
<handler name="SOAPActionBasedDispatcher"
class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher">
<order phase="Transport"/>
</handler>
</phase>
<phase name="Addressing">
<handler name="AddressingBasedDispatcher"
class="org.apache.axis2.dispatchers.AddressingBasedDispatcher">
<order phase="Addressing"/>
</handler>
</phase>
<phase name="Security"/>
<phase name="PreDispatch"/>
<phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
<handler name="RequestURIBasedDispatcher"
class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/>
<handler name="SOAPActionBasedDispatcher"
class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/>
<handler name="RequestURIOperationDispatcher"
class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/>
<handler name="SOAPMessageBodyBasedDispatcher"
class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/>
<handler name="HTTPLocationBasedDispatcher"
class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/>
<handler name="GenericProviderDispatcher"
class="org.apache.axis2.jaxws.dispatchers.GenericProviderDispatcher"/>
<handler name="MustUnderstandValidationDispatcher"
class="org.apache.axis2.jaxws.dispatchers.MustUnderstandValidationDispatcher"/>
</phase>
<phase name="RMPhase"/>
<!-- System predefined phases -->
<!-- After Postdispatch phase module author or service author can add any phase he want -->
<phase name="OperationInPhase">
<handler name="MustUnderstandChecker"
class="org.apache.axis2.jaxws.dispatchers.MustUnderstandChecker">
<order phase="OperationInPhase"/>
</handler>
</phase>
<phase name="soapmonitorPhase"/>
</phaseOrder>
<phaseOrder type="OutFlow">
<!-- user can add his own phases to this area -->
<phase name="soapmonitorPhase"/>
<phase name="OperationOutPhase"/>
<!--system predefined phase-->
<!--these phase will run irrespective of the service-->
<phase name="RMPhase"/>
<phase name="PolicyDetermination"/>
<phase name="MessageOut"/>
<phase name="Security"/>
</phaseOrder>
<phaseOrder type="InFaultFlow">
<phase name="Addressing">
<handler name="AddressingBasedDispatcher"
class="org.apache.axis2.dispatchers.AddressingBasedDispatcher">
<order phase="Addressing"/>
</handler>
</phase>
<phase name="Security"/>
<phase name="PreDispatch"/>
<phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
<handler name="RequestURIBasedDispatcher"
class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/>
<handler name="SOAPActionBasedDispatcher"
class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/>
<handler name="RequestURIOperationDispatcher"
class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/>
<handler name="SOAPMessageBodyBasedDispatcher"
class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/>
<handler name="HTTPLocationBasedDispatcher"
class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/>
<handler name="GenericProviderDispatcher"
class="org.apache.axis2.jaxws.dispatchers.GenericProviderDispatcher"/>
<handler name="MustUnderstandValidationDispatcher"
class="org.apache.axis2.jaxws.dispatchers.MustUnderstandValidationDispatcher"/>
</phase>
<phase name="RMPhase"/>
<!-- user can add his own phases to this area -->
<phase name="OperationInFaultPhase"/>
<phase name="soapmonitorPhase"/>
</phaseOrder>
<phaseOrder type="OutFaultFlow">
<!-- user can add his own phases to this area -->
<phase name="soapmonitorPhase"/>
<phase name="OperationOutFaultPhase"/>
<phase name="RMPhase"/>
<phase name="PolicyDetermination"/>
<phase name="MessageOut"/>
<phase name="Security"/>
</phaseOrder>
</axisconfig>