conf/initiator-axis2.xml - axis-axis2-java-kandula - Git at Google

 <!--
 	/*
 	* Copyright 2001-2004 The Apache Software Foundation.
 	*
 	* Licensed under the Apache License, Version 2.0 (the "License");
 	* you may not use this file except in compliance with the License.
 	* You may obtain a copy of the License at
 	*
 	*      http://www.apache.org/licenses/LICENSE-2.0
 	*
 	* Unless required by applicable law or agreed to in writing, software
 	* distributed under the License is distributed on an "AS IS" BASIS,
 	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 	* See the License for the specific language governing permissions and
 	* limitations under the License.
 	*/
 -->

 <axisconfig name="AxisJava2.0">
 	<!-- ================================================= -->
 	<!-- Parameters -->
 	<!-- ================================================= -->
 	<parameter name="hotdeployment" locked="false">true</parameter>
 	<parameter name="hotupdate" locked="false">false</parameter>
 	<parameter name="enableMTOM" locked="false">false</parameter>
 	<parameter name="enableSwA" locked="false">false</parameter>

 	<!--Uncomment if you want to enable file caching for attachments -->
 	<!--parameter name="cacheAttachments" locked="false">true</parameter>
 		<parameter name="attachmentDIR" locked="false"></parameter>
 		<parameter name="sizeThreshold" locked="false">4000</parameter-->

 	<!--This will give out the timout of the configuration contexts, in seconds-->
 	<parameter name="ConfigContextTimeoutInterval" locked="false">30</parameter>

 	<!--During a fault, stacktrace can be sent with the fault message. The following flag will control -->
 	<!--that behaviour.-->
 	<parameter name="sendStacktraceDetailsWithFaults" locked="false">false</parameter>

 	<!--If there aren't any information available to find out the fault reason, we set the message of the expcetion-->
 	<!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be -->
 	<!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag-->
 	<!--is set then, Axis2 tries to get the first exception and set its message as the faultreason/Reason.-->
 	<parameter name="DrillDownToRootCauseForFaultReason" locked="false">false</parameter>

 	<parameter name="userName" locked="false">admin</parameter>
 	<parameter name="password" locked="false">axis2</parameter>

 	<!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.-->
 	<!--<parameter name="ServicesDirectory" locked="false">service</parameter>-->
 	<!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path-->
 	<!--<parameter name="ModulesDirectory" locked="false">modules</parameter>-->


 	<!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context-->
 	<!--root which can configured using the following contextRoot parameter-->
 	<!--<parameter name="contextRoot" locked="false">axis2</parameter>-->

 	<!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distingiush those endpoints-->
 	<!--In case of a servlet, if you change this you have to manually change the settings of your servlet container to map this -->
 	<!--context path to proper Axis2 servlets-->
 	<!--<parameter name="servicePath" locked="false">services</parameter>-->
 	<!--<parameter name="restPath" locked="false">rest</parameter>-->


 	<!--Set the flag to true if you want to enable transport level session mangment-->
 	<parameter name="manageTransportSession" locked="false">false</parameter>

 	<!--Following two parameters will be used to handle REST in Axis2. The default settings will make Axis2 to have two-->
 	<!--different endpoints, one for REST (AxisRESTServlet) one for SOAP message handling (AxisServlet). But following-->
 	<!--parameters help to tweak the message handling of two main servlets. -->

 	<!-- If the enableRESTInAxis2MainServlet is true, then Axis2MainServlet will handle both SOAP and REST messages -->
 	<parameter name="enableRESTInAxis2MainServlet" locked="true">false</parameter>

 	<!-- Following parameter will completely disable REST handling in both the servlets-->
 	<parameter name="disableREST" locked="true">false</parameter>

 	<!-- This will disable the separate servlet we have for REST handling. -->
 	<parameter name="disableSeparateEndpointForREST" locked="true">false</parameter>

 	<!-- If you have a frontend host which exposes this webservice using a different public URL  -->
 	<!-- use this parameter to override autodetected url -->
 	<!--<parameter name="httpFrontendHostUrl" locked="false">https://someotherhost/context</parameter>-->


 	<!--    The way of adding listener to the system-->
 	<!--    <listener class="org.apache.axis2.ObserverIMPL">-->
 	<!--        <parameter name="RSS_URL" locked="false">http://127.0.0.1/rss</parameter>-->
 	<!--    </listener>-->

 	<!-- ================================================= -->
 	<!-- Message Receivers -->
 	<!-- ================================================= -->
 	<!--This is the Deafult Message Receiver for the system , if you want to have MessageReceivers for -->
 	<!--all the other MEP implement it and add the correct entry to here , so that you can refer from-->
 	<!--any operation -->
 	<!--Note : You can ovride this for particular service by adding the same element with your requirement-->
 	<messageReceivers>
 		<messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only"
 			class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver" />
 		<messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out"
 			class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver" />
 	</messageReceivers>
 	<!-- ================================================= -->
 	<!-- Transport Ins -->
 	<!-- ================================================= -->
 	<transportReceiver name="http"
 		class="org.apache.axis2.transport.http.SimpleHTTPServer">
 		<parameter name="port" locked="false">8080</parameter>
 		<!-- Here is the complete list of supported parameters (see example settings further below):
 			port: the port to listen on (default 6060)
 			hostname:  if non-null, url prefix used in reply-to endpoint references                                 (default null)
 			originServer:  value of http Server header in outgoing messages                                         (default "Simple-Server/1.1")
 			requestTimeout:  value in millis of time that requests can wait for data                                (default 20000)
 			requestTcpNoDelay:  true to maximize performance and minimize latency                                   (default true)
 			false to minimize bandwidth consumption by combining segments
 			requestCoreThreadPoolSize:  number of threads available for request processing (unless queue fills up)  (default 25)
 			requestMaxThreadPoolSize:  number of threads available for request processing if queue fills us         (default 150)
 			note that default queue never fills up:  see HttpFactory
 			threadKeepAliveTime:  time to keep threads in excess of core size alive while inactive                  (default 180)
 			note that no such threads can exist with default unbounded request queue
 			threadKeepAliveTimeUnit:  TimeUnit of value in threadKeepAliveTime (default SECONDS)                    (default SECONDS)
 		-->
 		<!-- <parameter name="hostname"                  locked="false">http://www.myApp.com/ws</parameter> -->
 		<!-- <parameter name="originServer"              locked="false">My-Server/1.1</parameter>           -->
 		<!-- <parameter name="requestTimeout"            locked="false">10000</parameter>                   -->
 		<!-- <parameter name="requestTcpNoDelay"         locked="false">false</parameter>                   -->
 		<!-- <parameter name="requestCoreThreadPoolSize" locked="false">50</parameter>                      -->
 		<!-- <parameter name="RequestMaxThreadPoolSize"  locked="false">100</parameter>                     -->
 		<!-- <parameter name="threadKeepAliveTime"       locked="false">240000</parameter>                  -->
 		<!-- <parameter name="threadKeepAliveTimeUnit"   locked="false">MILLISECONDS</parameter>            -->
 	</transportReceiver>

 	<!--Uncomment this and configure as appropriate for JMS transport support, after setting up your JMS environment (e.g. ActiveMQ)
 		<transportReceiver name="jms" class="org.apache.axis2.transport.jms.JMSListener">
 		<parameter name="myTopicConnectionFactory" locked="false">
 		<parameter name="java.naming.factory.initial" locked="false">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
 		<parameter name="java.naming.provider.url" locked="false">tcp://localhost:61616</parameter>
 		<parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">TopicConnectionFactory</parameter>
 		</parameter>

 		<parameter name="myQueueConnectionFactory" locked="false">
 		<parameter name="java.naming.factory.initial" locked="false">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
 		<parameter name="java.naming.provider.url" locked="false">tcp://localhost:61616</parameter>
 		<parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">QueueConnectionFactory</parameter>
 		</parameter>

 		<parameter name="default" locked="false">
 		<parameter name="java.naming.factory.initial" locked="false">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
 		<parameter name="java.naming.provider.url" locked="false">tcp://localhost:61616</parameter>
 		<parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">QueueConnectionFactory</parameter>
 		</parameter>
 		</transportReceiver>-->

 	<!--Uncomment if you want to have SMTP transport support-->
 	<!--<transportReceiver name="mail" class="org.apache.axis2.transport.mail.SimpleMailListener">-->
 	<!--<parameter name="transport.mail.pop3.host" locked="false">127.0.0.1</parameter>-->
 	<!--<parameter name="transport.mail.pop3.user" locked="false">axis2</parameter>-->
 	<!--<parameter name="transport.mail.pop3.password" locked="false">axis2</parameter>-->
 	<!--<parameter name="transport.mail.pop3.port" locked="false">110</parameter>-->
 	<!--<parameter name="transport.mail.replyToAddress" locked="false">axis2@127.0.0.1</parameter>-->
 	<!--</transportReceiver>-->

 	<!--Uncomment if you want to have TCP transport support-->
 	<!--transportReceiver name="tcp"
 		class="org.apache.axis2.transport.tcp.TCPServer">
 		<parameter name="port" locked="false">6060</parameter-->
 	>
 	<!--If you want to give your own host address for EPR generation-->
 	<!--uncommet following paramter , and set as you required.-->
 	<!--<parameter name="hostname" locked="false">tcp://myApp.com/ws</parameter>-->
 	<!-- /transportReceiver -->

 	<!-- ================================================= -->
 	<!-- Transport Outs -->
 	<!-- ================================================= -->

 	<transportSender name="tcp"
 		class="org.apache.axis2.transport.tcp.TCPTransportSender" />
 	<transportSender name="local"
 		class="org.apache.axis2.transport.local.LocalTransportSender" />
 	<transportSender name="http"
 		class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
 		<parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
 		<parameter name="Transfer-Encoding" locked="false">chunked</parameter>
 	</transportSender>
 	<transportSender name="https"
 		class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
 		<parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
 		<parameter name="Transfer-Encoding" locked="false">chunked</parameter>
 	</transportSender>
 	<!--Uncomment this and configure as appropriate for JMS transport support, after setting up your JMS environment (e.g. ActiveMQ)
 		<transportSender name="jms"
 		class="org.apache.axis2.transport.jms.JMSSender"/>
 	-->

 	<!-- Uncomment this one with the appropriate papameters to enable the SMTP transport Receiver
 		<transportSender name="mailto" class="org.apache.axis2.transport.mail.MailTransportSender">
 		<parameter name="transport.mail.smtp.host" locked="false">127.0.0.1</parameter>
 		<parameter name="transport.mail.smtp.user" locked="false">axis2</parameter>
 		<parameter name="transport.mail.smtp.password" locked="false">axis2</parameter>
 		<parameter name="transport.mail.smtp.port" locked="false">25</parameter>
 		</transportSender>
 	-->

 	<!-- ================================================= -->
 	<!-- Global Modules  -->
 	<!-- ================================================= -->
 	<!-- Comment this to disable Addressing -->
 	<module ref="addressing" />
 	<module ref="kandula-outflow" />

 	<!--Configuring module , providing parameters for modules whether they refer or not-->
 	<!--<moduleConfig name="addressing">-->
 	<!--<parameter name="addressingPara" locked="false">N/A</parameter>-->
 	<!--</moduleConfig>-->

 	<!-- ================================================= -->
 	<!-- Phases  -->
 	<!-- ================================================= -->
     <phaseOrder type="InFlow">
         <!--  System predefined phases       -->
         <phase name="Transport">
             <handler name="RequestURIBasedDispatcher"
                      class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher">
                 <order phase="Transport"/>
             </handler>
             <handler name="SOAPActionBasedDispatcher"
                      class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher">
                 <order phase="Transport"/>
             </handler>
         </phase>
         <phase name="Addressing">
              <handler name="AddressingBasedDispatcher"
                      class="org.apache.axis2.dispatchers.AddressingBasedDispatcher">
                  <order phase="Addressing"/>
             </handler>
         </phase>
         <phase name="Security"/>
         <phase name="PreDispatch"/>
         <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
             <handler name="RequestURIBasedDispatcher"
                      class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/>
             <handler name="SOAPActionBasedDispatcher"
                      class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/>
             <handler name="RequestURIOperationDispatcher"
                      class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/>
             <handler name="SOAPMessageBodyBasedDispatcher"
                      class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/>
             <handler name="HTTPLocationBasedDispatcher"
                      class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/>
             <handler name="GenericProviderDispatcher"
                      class="org.apache.axis2.jaxws.dispatchers.GenericProviderDispatcher"/>
             <handler name="MustUnderstandValidationDispatcher"
                      class="org.apache.axis2.jaxws.dispatchers.MustUnderstandValidationDispatcher"/>
         </phase>
         <phase name="RMPhase"/>
         <!--  System predefined phases       -->
         <!--   After Postdispatch phase module author or service author can add any phase he want      -->
         <phase name="OperationInPhase">
             <handler name="MustUnderstandChecker"
                      class="org.apache.axis2.jaxws.dispatchers.MustUnderstandChecker">
                 <order phase="OperationInPhase"/>
             </handler>
         </phase>
         <phase name="soapmonitorPhase"/>
     </phaseOrder>
     <phaseOrder type="OutFlow">
         <!--      user can add his own phases to this area  -->
         <phase name="soapmonitorPhase"/>
         <phase name="OperationOutPhase"/>
         <!--system predefined phase-->
         <!--these phase will run irrespective of the service-->
         <phase name="RMPhase"/>
         <phase name="PolicyDetermination"/>
         <phase name="MessageOut"/>
         <phase name="Security"/>
     </phaseOrder>
     <phaseOrder type="InFaultFlow">
         <phase name="Addressing">
              <handler name="AddressingBasedDispatcher"
                      class="org.apache.axis2.dispatchers.AddressingBasedDispatcher">
                  <order phase="Addressing"/>
             </handler>
         </phase>
         <phase name="Security"/>
         <phase name="PreDispatch"/>
         <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
             <handler name="RequestURIBasedDispatcher"
                      class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/>
             <handler name="SOAPActionBasedDispatcher"
                      class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/>
             <handler name="RequestURIOperationDispatcher"
                      class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/>
             <handler name="SOAPMessageBodyBasedDispatcher"
                      class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/>
             <handler name="HTTPLocationBasedDispatcher"
                      class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/>
             <handler name="GenericProviderDispatcher"
                      class="org.apache.axis2.jaxws.dispatchers.GenericProviderDispatcher"/>
             <handler name="MustUnderstandValidationDispatcher"
                      class="org.apache.axis2.jaxws.dispatchers.MustUnderstandValidationDispatcher"/>
         </phase>
         <phase name="RMPhase"/>
         <!--      user can add his own phases to this area  -->
         <phase name="OperationInFaultPhase"/>
         <phase name="soapmonitorPhase"/>
     </phaseOrder>
     <phaseOrder type="OutFaultFlow">
         <!--      user can add his own phases to this area  -->
         <phase name="soapmonitorPhase"/>
         <phase name="OperationOutFaultPhase"/>
         <phase name="RMPhase"/>
         <phase name="PolicyDetermination"/>
         <phase name="MessageOut"/>
         <phase name="Security"/>
     </phaseOrder>
 </axisconfig>
	<!--
	/*
	* Copyright 2001-2004 The Apache Software Foundation.
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/
	-->

	<axisconfig name="AxisJava2.0">
	<!-- ================================================= -->
	<!-- Parameters -->
	<!-- ================================================= -->
	<parameter name="hotdeployment" locked="false">true</parameter>
	<parameter name="hotupdate" locked="false">false</parameter>
	<parameter name="enableMTOM" locked="false">false</parameter>
	<parameter name="enableSwA" locked="false">false</parameter>

	<!--Uncomment if you want to enable file caching for attachments -->
	<!--parameter name="cacheAttachments" locked="false">true</parameter>
	<parameter name="attachmentDIR" locked="false"></parameter>
	<parameter name="sizeThreshold" locked="false">4000</parameter-->

	<!--This will give out the timout of the configuration contexts, in seconds-->
	<parameter name="ConfigContextTimeoutInterval" locked="false">30</parameter>

	<!--During a fault, stacktrace can be sent with the fault message. The following flag will control -->
	<!--that behaviour.-->
	<parameter name="sendStacktraceDetailsWithFaults" locked="false">false</parameter>

	<!--If there aren't any information available to find out the fault reason, we set the message of the expcetion-->
	<!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be -->
	<!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag-->
	<!--is set then, Axis2 tries to get the first exception and set its message as the faultreason/Reason.-->
	<parameter name="DrillDownToRootCauseForFaultReason" locked="false">false</parameter>

	<parameter name="userName" locked="false">admin</parameter>
	<parameter name="password" locked="false">axis2</parameter>

	<!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.-->
	<!--<parameter name="ServicesDirectory" locked="false">service</parameter>-->
	<!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path-->
	<!--<parameter name="ModulesDirectory" locked="false">modules</parameter>-->



	<!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context-->
	<!--root which can configured using the following contextRoot parameter-->
	<!--<parameter name="contextRoot" locked="false">axis2</parameter>-->

	<!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distingiush those endpoints-->
	<!--In case of a servlet, if you change this you have to manually change the settings of your servlet container to map this -->
	<!--context path to proper Axis2 servlets-->
	<!--<parameter name="servicePath" locked="false">services</parameter>-->
	<!--<parameter name="restPath" locked="false">rest</parameter>-->


	<!--Set the flag to true if you want to enable transport level session mangment-->
	<parameter name="manageTransportSession" locked="false">false</parameter>

	<!--Following two parameters will be used to handle REST in Axis2. The default settings will make Axis2 to have two-->
	<!--different endpoints, one for REST (AxisRESTServlet) one for SOAP message handling (AxisServlet). But following-->
	<!--parameters help to tweak the message handling of two main servlets. -->

	<!-- If the enableRESTInAxis2MainServlet is true, then Axis2MainServlet will handle both SOAP and REST messages -->
	<parameter name="enableRESTInAxis2MainServlet" locked="true">false</parameter>

	<!-- Following parameter will completely disable REST handling in both the servlets-->
	<parameter name="disableREST" locked="true">false</parameter>

	<!-- This will disable the separate servlet we have for REST handling. -->
	<parameter name="disableSeparateEndpointForREST" locked="true">false</parameter>

	<!-- If you have a frontend host which exposes this webservice using a different public URL -->
	<!-- use this parameter to override autodetected url -->
	<!--<parameter name="httpFrontendHostUrl" locked="false">https://someotherhost/context</parameter>-->


	<!-- The way of adding listener to the system-->
	<!-- <listener class="org.apache.axis2.ObserverIMPL">-->
	<!-- <parameter name="RSS_URL" locked="false">http://127.0.0.1/rss</parameter>-->
	<!-- </listener>-->

	<!-- ================================================= -->
	<!-- Message Receivers -->
	<!-- ================================================= -->
	<!--This is the Deafult Message Receiver for the system , if you want to have MessageReceivers for -->
	<!--all the other MEP implement it and add the correct entry to here , so that you can refer from-->
	<!--any operation -->
	<!--Note : You can ovride this for particular service by adding the same element with your requirement-->
	<messageReceivers>
	<messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only"
	class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver" />
	<messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out"
	class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver" />
	</messageReceivers>
	<!-- ================================================= -->
	<!-- Transport Ins -->
	<!-- ================================================= -->
	<transportReceiver name="http"
	class="org.apache.axis2.transport.http.SimpleHTTPServer">
	<parameter name="port" locked="false">8080</parameter>
	<!-- Here is the complete list of supported parameters (see example settings further below):
	port: the port to listen on (default 6060)
	hostname: if non-null, url prefix used in reply-to endpoint references (default null)
	originServer: value of http Server header in outgoing messages (default "Simple-Server/1.1")
	requestTimeout: value in millis of time that requests can wait for data (default 20000)
	requestTcpNoDelay: true to maximize performance and minimize latency (default true)
	false to minimize bandwidth consumption by combining segments
	requestCoreThreadPoolSize: number of threads available for request processing (unless queue fills up) (default 25)
	requestMaxThreadPoolSize: number of threads available for request processing if queue fills us (default 150)
	note that default queue never fills up: see HttpFactory
	threadKeepAliveTime: time to keep threads in excess of core size alive while inactive (default 180)
	note that no such threads can exist with default unbounded request queue
	threadKeepAliveTimeUnit: TimeUnit of value in threadKeepAliveTime (default SECONDS) (default SECONDS)
	-->
	<!-- <parameter name="hostname" locked="false">http://www.myApp.com/ws</parameter> -->
	<!-- <parameter name="originServer" locked="false">My-Server/1.1</parameter> -->
	<!-- <parameter name="requestTimeout" locked="false">10000</parameter> -->
	<!-- <parameter name="requestTcpNoDelay" locked="false">false</parameter> -->
	<!-- <parameter name="requestCoreThreadPoolSize" locked="false">50</parameter> -->
	<!-- <parameter name="RequestMaxThreadPoolSize" locked="false">100</parameter> -->
	<!-- <parameter name="threadKeepAliveTime" locked="false">240000</parameter> -->
	<!-- <parameter name="threadKeepAliveTimeUnit" locked="false">MILLISECONDS</parameter> -->
	</transportReceiver>

	<!--Uncomment this and configure as appropriate for JMS transport support, after setting up your JMS environment (e.g. ActiveMQ)
	<transportReceiver name="jms" class="org.apache.axis2.transport.jms.JMSListener">
	<parameter name="myTopicConnectionFactory" locked="false">
	<parameter name="java.naming.factory.initial" locked="false">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
	<parameter name="java.naming.provider.url" locked="false">tcp://localhost:61616</parameter>
	<parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">TopicConnectionFactory</parameter>
	</parameter>

	<parameter name="myQueueConnectionFactory" locked="false">
	<parameter name="java.naming.factory.initial" locked="false">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
	<parameter name="java.naming.provider.url" locked="false">tcp://localhost:61616</parameter>
	<parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">QueueConnectionFactory</parameter>
	</parameter>

	<parameter name="default" locked="false">
	<parameter name="java.naming.factory.initial" locked="false">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
	<parameter name="java.naming.provider.url" locked="false">tcp://localhost:61616</parameter>
	<parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">QueueConnectionFactory</parameter>
	</parameter>
	</transportReceiver>-->

	<!--Uncomment if you want to have SMTP transport support-->
	<!--<transportReceiver name="mail" class="org.apache.axis2.transport.mail.SimpleMailListener">-->
	<!--<parameter name="transport.mail.pop3.host" locked="false">127.0.0.1</parameter>-->
	<!--<parameter name="transport.mail.pop3.user" locked="false">axis2</parameter>-->
	<!--<parameter name="transport.mail.pop3.password" locked="false">axis2</parameter>-->
	<!--<parameter name="transport.mail.pop3.port" locked="false">110</parameter>-->
	<!--<parameter name="transport.mail.replyToAddress" locked="false">axis2@127.0.0.1</parameter>-->
	<!--</transportReceiver>-->

	<!--Uncomment if you want to have TCP transport support-->
	<!--transportReceiver name="tcp"
	class="org.apache.axis2.transport.tcp.TCPServer">
	<parameter name="port" locked="false">6060</parameter-->
	>
	<!--If you want to give your own host address for EPR generation-->
	<!--uncommet following paramter , and set as you required.-->
	<!--<parameter name="hostname" locked="false">tcp://myApp.com/ws</parameter>-->
	<!-- /transportReceiver -->

	<!-- ================================================= -->
	<!-- Transport Outs -->
	<!-- ================================================= -->

	<transportSender name="tcp"
	class="org.apache.axis2.transport.tcp.TCPTransportSender" />
	<transportSender name="local"
	class="org.apache.axis2.transport.local.LocalTransportSender" />
	<transportSender name="http"
	class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
	<parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
	<parameter name="Transfer-Encoding" locked="false">chunked</parameter>
	</transportSender>
	<transportSender name="https"
	class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
	<parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
	<parameter name="Transfer-Encoding" locked="false">chunked</parameter>
	</transportSender>
	<!--Uncomment this and configure as appropriate for JMS transport support, after setting up your JMS environment (e.g. ActiveMQ)
	<transportSender name="jms"
	class="org.apache.axis2.transport.jms.JMSSender"/>
	-->

	<!-- Uncomment this one with the appropriate papameters to enable the SMTP transport Receiver
	<transportSender name="mailto" class="org.apache.axis2.transport.mail.MailTransportSender">
	<parameter name="transport.mail.smtp.host" locked="false">127.0.0.1</parameter>
	<parameter name="transport.mail.smtp.user" locked="false">axis2</parameter>
	<parameter name="transport.mail.smtp.password" locked="false">axis2</parameter>
	<parameter name="transport.mail.smtp.port" locked="false">25</parameter>
	</transportSender>
	-->

	<!-- ================================================= -->
	<!-- Global Modules -->
	<!-- ================================================= -->
	<!-- Comment this to disable Addressing -->
	<module ref="addressing" />
	<module ref="kandula-outflow" />

	<!--Configuring module , providing parameters for modules whether they refer or not-->
	<!--<moduleConfig name="addressing">-->
	<!--<parameter name="addressingPara" locked="false">N/A</parameter>-->
	<!--</moduleConfig>-->

	<!-- ================================================= -->
	<!-- Phases -->
	<!-- ================================================= -->
	<phaseOrder type="InFlow">
	<!-- System predefined phases -->
	<phase name="Transport">
	<handler name="RequestURIBasedDispatcher"
	class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher">
	<order phase="Transport"/>
	</handler>
	<handler name="SOAPActionBasedDispatcher"
	class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher">
	<order phase="Transport"/>
	</handler>
	</phase>
	<phase name="Addressing">
	<handler name="AddressingBasedDispatcher"
	class="org.apache.axis2.dispatchers.AddressingBasedDispatcher">
	<order phase="Addressing"/>
	</handler>
	</phase>
	<phase name="Security"/>
	<phase name="PreDispatch"/>
	<phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
	<handler name="RequestURIBasedDispatcher"
	class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/>
	<handler name="SOAPActionBasedDispatcher"
	class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/>
	<handler name="RequestURIOperationDispatcher"
	class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/>
	<handler name="SOAPMessageBodyBasedDispatcher"
	class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/>
	<handler name="HTTPLocationBasedDispatcher"
	class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/>
	<handler name="GenericProviderDispatcher"
	class="org.apache.axis2.jaxws.dispatchers.GenericProviderDispatcher"/>
	<handler name="MustUnderstandValidationDispatcher"
	class="org.apache.axis2.jaxws.dispatchers.MustUnderstandValidationDispatcher"/>
	</phase>
	<phase name="RMPhase"/>
	<!-- System predefined phases -->
	<!-- After Postdispatch phase module author or service author can add any phase he want -->
	<phase name="OperationInPhase">
	<handler name="MustUnderstandChecker"
	class="org.apache.axis2.jaxws.dispatchers.MustUnderstandChecker">
	<order phase="OperationInPhase"/>
	</handler>
	</phase>
	<phase name="soapmonitorPhase"/>
	</phaseOrder>
	<phaseOrder type="OutFlow">
	<!-- user can add his own phases to this area -->
	<phase name="soapmonitorPhase"/>
	<phase name="OperationOutPhase"/>
	<!--system predefined phase-->
	<!--these phase will run irrespective of the service-->
	<phase name="RMPhase"/>
	<phase name="PolicyDetermination"/>
	<phase name="MessageOut"/>
	<phase name="Security"/>
	</phaseOrder>
	<phaseOrder type="InFaultFlow">
	<phase name="Addressing">
	<handler name="AddressingBasedDispatcher"
	class="org.apache.axis2.dispatchers.AddressingBasedDispatcher">
	<order phase="Addressing"/>
	</handler>
	</phase>
	<phase name="Security"/>
	<phase name="PreDispatch"/>
	<phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
	<handler name="RequestURIBasedDispatcher"
	class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/>
	<handler name="SOAPActionBasedDispatcher"
	class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/>
	<handler name="RequestURIOperationDispatcher"
	class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/>
	<handler name="SOAPMessageBodyBasedDispatcher"
	class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/>
	<handler name="HTTPLocationBasedDispatcher"
	class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/>
	<handler name="GenericProviderDispatcher"
	class="org.apache.axis2.jaxws.dispatchers.GenericProviderDispatcher"/>
	<handler name="MustUnderstandValidationDispatcher"
	class="org.apache.axis2.jaxws.dispatchers.MustUnderstandValidationDispatcher"/>
	</phase>
	<phase name="RMPhase"/>
	<!-- user can add his own phases to this area -->
	<phase name="OperationInFaultPhase"/>
	<phase name="soapmonitorPhase"/>
	</phaseOrder>
	<phaseOrder type="OutFaultFlow">
	<!-- user can add his own phases to this area -->
	<phase name="soapmonitorPhase"/>
	<phase name="OperationOutFaultPhase"/>
	<phase name="RMPhase"/>
	<phase name="PolicyDetermination"/>
	<phase name="MessageOut"/>
	<phase name="Security"/>
	</phaseOrder>
	</axisconfig>