<!-- | |
~ Licensed to the Apache Software Foundation (ASF) under one | |
~ or more contributor license agreements. See the NOTICE file | |
~ distributed with this work for additional information | |
~ regarding copyright ownership. The ASF licenses this file | |
~ to you under the Apache License, Version 2.0 (the | |
~ "License"); you may not use this file except in compliance | |
~ with the License. You may obtain a copy of the License at | |
~ | |
~ http://www.apache.org/licenses/LICENSE-2.0 | |
~ | |
~ Unless required by applicable law or agreed to in writing, | |
~ software distributed under the License is distributed on an | |
~ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY | |
~ KIND, either express or implied. See the License for the | |
~ specific language governing permissions and limitations | |
~ under the License. | |
--> | |
<axisconfig name="AxisJava2.0"> | |
<!-- ================================================= --> | |
<!-- Parameters --> | |
<!-- ================================================= --> | |
<parameter name="hotdeployment">false</parameter> | |
<parameter name="hotupdate">false</parameter> | |
<parameter name="enableMTOM">false</parameter> | |
<parameter name="enableSwA">false</parameter> | |
<!--Uncomment if you want to enable file caching for attachments --> | |
<!--parameter name="cacheAttachments">true</parameter> | |
<parameter name="attachmentDIR"></parameter> | |
<parameter name="sizeThreshold">4000</parameter--> | |
<!--Uncomment if you want to enable the reduction of the in-memory cache of WSDL definitions --> | |
<!--In some server environments, the available memory heap is limited and can fill up under load --> | |
<!--Since in-memory copies of WSDL definitions can be large, some steps can be taken--> | |
<!--to reduce the memory needed for the cached WSDL definitions. --> | |
<!--parameter name="reduceWSDLMemoryCache">true</parameter--> | |
<!--This will give out the timout of the configuration contexts, in milliseconds--> | |
<parameter name="ConfigContextTimeoutInterval">30000</parameter> | |
<!--During a fault, stack trace can be sent with the fault message. The following flag will control --> | |
<!--that behavior.--> | |
<parameter name="sendStacktraceDetailsWithFaults">false</parameter> | |
<!--If there aren't any information available to find out the fault reason, we set the message of the exception--> | |
<!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be --> | |
<!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag--> | |
<!--is set, then Axis2 tries to get the first exception and set its message as the faultreason/Reason.--> | |
<parameter name="DrillDownToRootCauseForFaultReason">false</parameter> | |
<parameter name="userName">admin</parameter> | |
<parameter name="password">axis2</parameter> | |
<!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.--> | |
<!--ServicesDirectory only works on the following cases--> | |
<!---File based configurator and in that case the value should be a file URL (http:// not allowed)--> | |
<!---When creating URL Based configurator with URL “file://” --> | |
<!--- War based configurator with expanded case , --> | |
<!--All the other scenarios it will be ignored.--> | |
<!--<parameter name="ServicesDirectory">service</parameter>--> | |
<!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path--> | |
<!--<parameter name="ModulesDirectory">modules</parameter>--> | |
<!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context--> | |
<!--root which can configured using the following contextRoot parameter--> | |
<!--<parameter name="contextRoot">axis2</parameter>--> | |
<!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distinguiush those endpoints--> | |
<!--In case of a servlet, if you change this you have to manually change the settings of your servlet container to map this --> | |
<!--context path to proper Axis2 servlets--> | |
<parameter name="servicePath">services</parameter> | |
<!--<parameter name="restPath">rest</parameter>--> | |
<!-- Following parameter will completely disable REST handling in Axis2--> | |
<parameter name="disableREST" locked="true">false</parameter> | |
<!-- Following parameter will suppress generation of SOAP 1.2 bindings in auto-generated WSDL files --> | |
<parameter name="disableSOAP12" locked="true">false</parameter> | |
<!--POJO deployer , this will alow users to drop .class file and make that into a service--> | |
<!--<deployer extension=".class" directory="pojo" class="org.apache.axis2.deployment.POJODeployer"/>--> | |
<!--<deployer extension=".jsa" directory="rmiservices" class="org.apache.axis2.rmi.deploy.RMIServiceDeployer"/>--> | |
<!-- Following parameter will set the host name for the epr--> | |
<!--<parameter name="hostname" locked="true">myhost.com</parameter>--> | |
<!-- If you have a front end host which exposes this webservice using a different public URL --> | |
<!-- use this parameter to override autodetected url --> | |
<!--<parameter name="httpFrontendHostUrl">https://someotherhost/context</parameter>--> | |
<!-- The way of adding listener to the system--> | |
<!-- <listener class="org.apache.axis2.ObserverIMPL">--> | |
<!-- <parameter name="RSS_URL">http://127.0.0.1/rss</parameter>--> | |
<!-- </listener>--> | |
<!-- ================================================= --> | |
<!-- Message Receivers --> | |
<!-- ================================================= --> | |
<!--This is the deafult MessageReceiver for the system , if you want to have MessageReceivers for --> | |
<!--all the other MEP implement it and add the correct entry to here , so that you can refer from--> | |
<!--any operation --> | |
<!--Note : You can ovrride this for a particular service by adding the same element with your requirement--> | |
<messageReceivers> | |
<messageReceiver mep="http://www.w3.org/ns/wsdl/in-only" | |
class="org.apache.axis2.rpc.receivers.RPCInOnlyMessageReceiver"/> | |
<messageReceiver mep="http://www.w3.org/ns/wsdl/robust-in-only" | |
class="org.apache.axis2.rpc.receivers.RPCInOnlyMessageReceiver"/> | |
<messageReceiver mep="http://www.w3.org/ns/wsdl/in-out" | |
class="org.apache.axis2.rpc.receivers.RPCMessageReceiver"/> | |
</messageReceivers> | |
<!-- ================================================= --> | |
<!-- Message Formatter --> | |
<!-- ================================================= --> | |
<!--Following content type to message formatter mapping can be used to implement support for different message --> | |
<!--format serialization in Axis2. These message formats are expected to be resolved based on the content type. --> | |
<messageFormatters> | |
<messageFormatter contentType="application/x-www-form-urlencoded" | |
class="org.apache.axis2.kernel.http.XFormURLEncodedFormatter"/> | |
<messageFormatter contentType="multipart/form-data" | |
class="org.apache.axis2.kernel.http.MultipartFormDataFormatter"/> | |
<messageFormatter contentType="application/xml" | |
class="org.apache.axis2.kernel.http.ApplicationXMLFormatter"/> | |
<messageFormatter contentType="text/xml" | |
class="org.apache.axis2.kernel.http.SOAPMessageFormatter"/> | |
<messageFormatter contentType="application/soap+xml" | |
class="org.apache.axis2.kernel.http.SOAPMessageFormatter"/> | |
</messageFormatters> | |
<!-- ================================================= --> | |
<!-- Message Builders --> | |
<!-- ================================================= --> | |
<!--Following content type to builder mapping can be used to implement support for different message --> | |
<!--formats in Axis2. These message formats are expected to be resolved based on the content type. --> | |
<messageBuilders> | |
<messageBuilder contentType="application/xml" | |
class="org.apache.axis2.builder.ApplicationXMLBuilder"/> | |
<messageBuilder contentType="application/xml" | |
class="org.apache.axis2.builder.ApplicationXMLBuilder"/> | |
<messageBuilder contentType="application/x-www-form-urlencoded" | |
class="org.apache.axis2.builder.XFormURLEncodedBuilder"/> | |
<messageBuilder contentType="multipart/form-data" | |
class="org.apache.axis2.builder.MultipartFormDataBuilder"/> | |
</messageBuilders> | |
<!-- ================================================= --> | |
<!-- Transport Ins --> | |
<!-- ================================================= --> | |
<!--<transportReceiver name="http" | |
class="org.apache.axis2.transport.http.SimpleHTTPServer"> | |
<parameter name="port">8080</parameter>--> | |
<!-- Here is the complete list of supported parameters (see example settings further below): | |
port: the port to listen on (default 6060) | |
hostname: if non-null, url prefix used in reply-to endpoint references (default null) | |
originServer: value of http Server header in outgoing messages (default "Simple-Server/1.1") | |
requestTimeout: value in millis of time that requests can wait for data (default 20000) | |
requestTcpNoDelay: true to maximize performance and minimize latency (default true) | |
false to minimize bandwidth consumption by combining segments | |
requestCoreThreadPoolSize: number of threads available for request processing (unless queue fills up) (default 25) | |
requestMaxThreadPoolSize: number of threads available for request processing if queue fills up (default 150) | |
note that default queue never fills up: see HttpFactory | |
threadKeepAliveTime: time to keep threads in excess of core size alive while inactive (default 180) | |
note that no such threads can exist with default unbounded request queue | |
threadKeepAliveTimeUnit: TimeUnit of value in threadKeepAliveTime (default SECONDS) (default SECONDS) | |
--> | |
<!-- <parameter name="hostname">http://www.myApp.com/ws</parameter> --> | |
<!-- <parameter name="originServer">My-Server/1.1</parameter> --> | |
<!-- <parameter name="requestTimeout">10000</parameter> --> | |
<!-- <parameter name="requestTcpNoDelay">false</parameter> --> | |
<!-- <parameter name="requestCoreThreadPoolSize">50</parameter> --> | |
<!-- <parameter name="requestMaxThreadPoolSize">100</parameter> --> | |
<!-- <parameter name="threadKeepAliveTime">240000</parameter> --> | |
<!-- <parameter name="threadKeepAliveTimeUnit">MILLISECONDS</parameter> --> | |
<!--</transportReceiver>--> | |
<!--Uncomment if you want to have TCP transport support--> | |
<!--transportReceiver name="tcp" | |
class="org.apache.axis2.transport.tcp.TCPServer"> | |
<parameter name="port">6060</parameter-->> | |
<!--If you want to give your own host address for EPR generation--> | |
<!--uncomment the following paramter , and set it as you required.--> | |
<!--<parameter name="hostname">tcp://myApp.com/ws</parameter>--> | |
<!-- /transportReceiver --> | |
<!-- ================================================= --> | |
<!-- Transport Outs --> | |
<!-- ================================================= --> | |
<!--Uncomment if you want to have TCP transport support--> | |
<!-- | |
<transportSender name="tcp" | |
class="org.apache.axis2.transport.tcp.TCPTransportSender"/> | |
--> | |
<transportSender name="local" | |
class="org.apache.axis2.transport.local.LocalTransportSender"/> | |
<transportSender name="http" | |
class="org.apache.axis2.transport.http.impl.httpclient4.HTTPClient4TransportSender"> | |
<parameter name="PROTOCOL">HTTP/1.1</parameter> | |
<parameter name="Transfer-Encoding">chunked</parameter> | |
<!-- If following is set to 'true', optional action part of the Content-Type will not be added to the SOAP 1.2 messages --> | |
<!-- <parameter name="OmitSOAP12Action">true</parameter> --> | |
</transportSender> | |
<transportSender name="https" | |
class="org.apache.axis2.transport.http.impl.httpclient4.HTTPClient4TransportSender"> | |
<parameter name="PROTOCOL">HTTP/1.1</parameter> | |
<parameter name="Transfer-Encoding">chunked</parameter> | |
</transportSender> | |
<!-- ================================================= --> | |
<!-- Global Modules --> | |
<!-- ================================================= --> | |
<!-- Comment this to disable Addressing --> | |
<!-- <module ref="addressing"/> --> | |
<!--Configuring module , providing parameters for modules whether they refer or not--> | |
<!--<moduleConfig name="addressing">--> | |
<!--<parameter name="addressingPara">N/A</parameter>--> | |
<!--</moduleConfig>--> | |
<!-- ================================================= --> | |
<!-- Clustering --> | |
<!-- ================================================= --> | |
<!-- Configure and uncomment following for preparing Axis2 to a clustered environment --> | |
<!-- | |
<cluster class="org.apache.axis2.cluster.tribes.TribesClusterManager"> | |
<parameter name="param1">value1</parameter> | |
<parameter name="domain">apache.axis2.domain</parameter> | |
<parameter name="synchronizeAll">true</parameter> | |
<parameter name="maxRetries">10</parameter> | |
<configurationManager class="org.apache.axis2.cluster.configuration.TribesConfigurationManager"> | |
<listener class="org.apache.axis2.cluster.configuration.DefaultConfigurationManagerListener"/> | |
</configurationManager> | |
<contextManager class="org.apache.axis2.cluster.context.TribesContextManager"> | |
<listener class="org.apache.axis2.cluster.context.DefaultContextManagerListener"/> | |
</contextManager> | |
</cluster> | |
--> | |
<!-- ================================================= --> | |
<!-- Phases --> | |
<!-- ================================================= --> | |
<phaseOrder type="InFlow"> | |
<!-- System predefined phases --> | |
<phase name="Transport"> | |
<handler name="RequestURIBasedDispatcher" | |
class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"> | |
<order phase="Transport"/> | |
</handler> | |
<handler name="SOAPActionBasedDispatcher" | |
class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"> | |
<order phase="Transport"/> | |
</handler> | |
</phase> | |
<phase name="Addressing"> | |
<handler name="AddressingBasedDispatcher" | |
class="org.apache.axis2.dispatchers.AddressingBasedDispatcher"> | |
<order phase="Addressing"/> | |
</handler> | |
</phase> | |
<phase name="Security"/> | |
<phase name="PreDispatch"/> | |
<phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase"> | |
<handler name="RequestURIBasedDispatcher" | |
class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/> | |
<handler name="SOAPActionBasedDispatcher" | |
class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/> | |
<handler name="RequestURIOperationDispatcher" | |
class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/> | |
<handler name="SOAPMessageBodyBasedDispatcher" | |
class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/> | |
<handler name="HTTPLocationBasedDispatcher" | |
class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/> | |
</phase> | |
<phase name="RMPhase"/> | |
<!-- System predefined phases --> | |
<!-- After Postdispatch phase module author or service author can add any phase he want --> | |
<phase name="OperationInPhase"/> | |
<phase name="soapmonitorPhase"/> | |
</phaseOrder> | |
<phaseOrder type="OutFlow"> | |
<!-- user can add his own phases to this area --> | |
<phase name="soapmonitorPhase"/> | |
<phase name="OperationOutPhase"/> | |
<!--system predefined phase--> | |
<!--these phase will run irrespective of the service--> | |
<phase name="RMPhase"/> | |
<phase name="PolicyDetermination"/> | |
<phase name="MessageOut"/> | |
<phase name="Security"/> | |
</phaseOrder> | |
<phaseOrder type="InFaultFlow"> | |
<phase name="Addressing"> | |
<handler name="AddressingBasedDispatcher" | |
class="org.apache.axis2.dispatchers.AddressingBasedDispatcher"> | |
<order phase="Addressing"/> | |
</handler> | |
</phase> | |
<phase name="Security"/> | |
<phase name="PreDispatch"/> | |
<phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase"> | |
<handler name="RequestURIBasedDispatcher" | |
class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/> | |
<handler name="SOAPActionBasedDispatcher" | |
class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/> | |
<handler name="RequestURIOperationDispatcher" | |
class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/> | |
<handler name="SOAPMessageBodyBasedDispatcher" | |
class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/> | |
<handler name="HTTPLocationBasedDispatcher" | |
class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/> | |
</phase> | |
<phase name="RMPhase"/> | |
<!-- user can add his own phases to this area --> | |
<phase name="OperationInFaultPhase"/> | |
<phase name="soapmonitorPhase"/> | |
</phaseOrder> | |
<phaseOrder type="OutFaultFlow"> | |
<!-- user can add his own phases to this area --> | |
<phase name="soapmonitorPhase"/> | |
<phase name="OperationOutFaultPhase"/> | |
<phase name="RMPhase"/> | |
<phase name="PolicyDetermination"/> | |
<phase name="MessageOut"/> | |
<phase name="Security"/> | |
</phaseOrder> | |
</axisconfig> | |