| /* |
| * Licensed to the Apache Software Foundation (ASF) under one or more |
| * contributor license agreements. See the NOTICE file distributed with |
| * this work for additional information regarding copyright ownership. |
| * The ASF licenses this file to You under the Apache License, Version 2.0 |
| * (the "License"); you may not use this file except in compliance with |
| * the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <stdlib.h> |
| #include <string.h> |
| #include "axutil_error_default.h" |
| |
| #define AXIS2_ERROR_MESSAGE_ARRAY_SIZE AXUTIL_ERROR_MAX |
| |
| /** |
| * Array to hold error messages corresponding to the pre-defined error codes. |
| * Note that array has capacity for additional error messages. These are |
| * reserved for modules. |
| * |
| * TODO: We have to review and change the following definition and also |
| * need to come up with a reserve strategy for module error code blocks. |
| * |
| * In writing a module following steps must be followed in extending Axis2/C |
| * errors |
| * 1. Declare and register the start of error messages for the new |
| * module. |
| * 2. New module can use up to 1000 messages for its errors. |
| * 3. In axis2c documentation an entry about new modules error range must |
| * be inserted so that another new module can know about the already |
| * occupied spaces. |
| */ |
| |
| AXIS2_EXPORT const axis2_char_t* axutil_error_messages[AXIS2_ERROR_MESSAGE_ARRAY_SIZE]; |
| |
| AXIS2_EXTERN axis2_status_t AXIS2_CALL |
| axutil_error_init() |
| { |
| int i = 0; |
| for(i = 0; i < AXIS2_ERROR_MESSAGE_ARRAY_SIZE; i++) |
| { |
| axutil_error_messages[i] = "Unknown Error :("; |
| } |
| |
| /* Common Errors */ |
| axutil_error_messages[AXIS2_ERROR_NONE] = "No Error"; |
| axutil_error_messages[AXIS2_ERROR_NO_MEMORY] = "Out of memory"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_NULL_PARAM] |
| = "NULL parameter was passed when a non NULL parameter was expected"; |
| /* core:addr */ |
| |
| /* core:clientapi */ |
| axutil_error_messages[AXIS2_ERROR_BLOCKING_INVOCATION_EXPECTS_RESPONSE] |
| = "Blocking invocation expects response"; |
| axutil_error_messages[AXIS2_ERROR_CANNOT_INFER_TRANSPORT] = "Cannot infer transport from URL"; |
| axutil_error_messages[AXIS2_ERROR_CLIENT_SIDE_SUPPORT_ONLY_ONE_CONF_CTX] |
| = "Client side support only one configuration context"; |
| axutil_error_messages[AXIS2_ERROR_MEP_CANNOT_BE_NULL_IN_MEP_CLIENT] |
| = "MEP cannot be NULL in MEP client"; |
| axutil_error_messages[AXIS2_ERROR_MEP_MISMATCH_IN_MEP_CLIENT] = "MEP mismatch"; |
| axutil_error_messages[AXIS2_ERROR_TWO_WAY_CHANNEL_NEEDS_ADDRESSING] |
| = "Two way channel needs addressing module to be engaged"; |
| axutil_error_messages[AXIS2_ERROR_UNKNOWN_TRANSPORT] = "Unknown transport"; |
| axutil_error_messages[AXIS2_ERROR_UNSUPPORTED_TYPE] = "Type is not supported"; |
| axutil_error_messages[AXIS2_ERROR_OPTIONS_OBJECT_IS_NOT_SET] = "Options object is not set"; |
| axutil_error_messages[AXIS2_ERROR_SESSION_TIMEOUT] = "Session Timeout"; |
| /* core:clientapi:diclient */ |
| |
| /* core:context */ |
| axutil_error_messages[AXIS2_ERROR_INVALID_SOAP_ENVELOPE_STATE] = "Invalid SOAP envelope state"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_STATE_MSG_CTX] = "Invalid message context state"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_STATE_SVC] = "Service accessed has invalid state"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_STATE_SVC_GRP] |
| = "Service group accessed has invalid state"; |
| axutil_error_messages[AXIS2_ERROR_SERVICE_NOT_YET_FOUND] = "Service not yet found"; |
| /* core:deployment */ |
| axutil_error_messages[AXI2_ERROR_INVALID_PHASE] = "Invalid phase found in phase validation*"; |
| axutil_error_messages[AXIS2_ERROR_CONFIG_NOT_FOUND] = "Configuration file cannot be found"; |
| axutil_error_messages[AXIS2_ERROR_DATA_ELEMENT_IS_NULL] = "Data element of the OM Node is NULL"; |
| axutil_error_messages[AXIS2_ERROR_IN_FLOW_NOT_ALLOWED_IN_TRS_OUT] |
| = "In transport sender, Inflow is not allowed"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_HANDLER_STATE] = "Invalid handler state"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_MODUELE_REF] = "Invalid module reference encountered"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_MODUELE_REF_BY_OP] |
| = "Invalid module referenced by operation"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_MODULE_CONF] = "Invalid module configuration"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_STATE_DESC_BUILDER] |
| = "Description builder is found to be in invalid state"; |
| axutil_error_messages[AXIS2_ERROR_MODULE_NOT_FOUND] = "Module not found"; |
| axutil_error_messages[AXIS2_ERROR_MODULE_VALIDATION_FAILED] = "Module validation failed"; |
| axutil_error_messages[AXIS2_ERROR_MODULE_XML_NOT_FOUND_FOR_THE_MODULE] |
| = "Module XML file is not found in the given path"; |
| axutil_error_messages[AXIS2_ERROR_NO_DISPATCHER_FOUND] = "No dispatcher found"; |
| axutil_error_messages[AXIS2_ERROR_OP_NAME_MISSING] = "Operation name is missing"; |
| axutil_error_messages[AXIS2_ERROR_OUT_FLOW_NOT_ALLOWED_IN_TRS_IN] |
| = "In transport receiver, outflow is not allowed"; |
| axutil_error_messages[AXIS2_ERROR_REPO_CAN_NOT_BE_NULL] = "Repository name cannot be NULL"; |
| axutil_error_messages[AXIS2_ERROR_REPOSITORY_NOT_EXIST] = "Repository in path does not exist"; |
| axutil_error_messages[AXIS2_ERROR_REPOS_LISTENER_INIT_FAILED] |
| = "Repository listener initialization failed"; |
| axutil_error_messages[AXIS2_ERROR_SERVICE_XML_NOT_FOUND] |
| = "Service XML file is not found in the given path"; |
| axutil_error_messages[AXIS2_ERROR_SVC_NAME_ERROR] = "Service name error"; |
| axutil_error_messages[AXIS2_ERROR_TRANSPORT_SENDER_ERROR] = "Transport sender error"; |
| axutil_error_messages[AXIS2_PATH_TO_CONFIG_CAN_NOT_BE_NULL] |
| = "Path to configuration file can not be NULL"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_SVC] = "Invalid service"; |
| /* core:description */ |
| axutil_error_messages[AXIS2_ERROR_CANNOT_CORRELATE_MSG] = "Cannot correlate message"; |
| axutil_error_messages[AXIS2_ERROR_COULD_NOT_MAP_MEP_URI_TO_MEP_CONSTANT] |
| = "Could not map the MEP URI to an Axis2/C MEP constant value"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_MESSAGE_ADDITION] |
| = "Invalid message addition operation context completed"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_STATE_MODULE_DESC] |
| = "Module description accessed has invalid state"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_STATE_PARAM_CONTAINER] |
| = "Parameter container not set"; |
| axutil_error_messages[AXIS2_ERROR_MODULE_ALREADY_ENGAGED_TO_OP] |
| = "Module has already been engaged to the operation"; |
| axutil_error_messages[AXIS2_ERROR_MODULE_ALREADY_ENGAGED_TO_SVC] |
| = "Module has already been engaged on the service."; |
| axutil_error_messages[AXIS2_ERROR_MODULE_ALREADY_ENGAGED_TO_SVC_GRP] |
| = "Module has already been engaged on the service."; |
| axutil_error_messages[AXIS2_ERROR_PARAMETER_LOCKED_CANNOT_OVERRIDE] |
| = "Parameter locked, cannot override"; |
| axutil_error_messages[AXIS2_ERROR_EMPTY_SCHEMA_LIST] |
| = "Schema list is empty or NULL in service"; |
| /* core:engine */ |
| axutil_error_messages[AXIS2_ERROR_BEFORE_AFTER_HANDLERS_SAME] |
| = "Both before and after handlers cannot be the same"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_HANDLER_RULES] = "Invalid handler rules"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_MODULE] = "Invalid module"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_PHASE_FIRST_HANDLER] |
| = "Invalid first handler for phase"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_PHASE_LAST_HANDLER] |
| = "Invalid last handler for phase"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_STATE_CONF] = "Invalid engine configuration state"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_STATE_PROCESSING_FAULT_ALREADY] |
| = "Message context processing a fault already"; |
| axutil_error_messages[AXIS2_ERROR_NOWHERE_TO_SEND_FAULT] |
| = "fault to field not specified in message context"; |
| axutil_error_messages[AXIS2_ERROR_PHASE_ADD_HANDLER_INVALID] |
| = "Only one handler allowed for phase, adding another handler is not allowed"; |
| axutil_error_messages[AXIS2_ERROR_PHASE_FIRST_HANDLER_ALREADY_SET] |
| = "First handler of phase already set"; |
| axutil_error_messages[AXIS2_ERROR_PHASE_LAST_HANDLER_ALREADY_SET] |
| = "Last handler of phase already set"; |
| axutil_error_messages[AXIS2_ERROR_TWO_SVCS_CANNOT_HAVE_SAME_NAME] |
| = "Two service can not have same name, a service with same name already"; |
| /* core:phaseresolver */ |
| axutil_error_messages[AXIS2_ERROR_INVALID_MODULE_REF] = "Invalid module reference"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_PHASE] = "Invalid Phase"; |
| axutil_error_messages[AXIS2_ERROR_NO_TRANSPORT_IN_CONFIGURED] |
| = "There are no in transport chains configured"; |
| axutil_error_messages[AXIS2_ERROR_NO_TRANSPORT_OUT_CONFIGURED] |
| = "There are no out transport chains configured"; |
| axutil_error_messages[AXIS2_ERROR_PHASE_IS_NOT_SPECIFED] = "Phase is not specified"; |
| axutil_error_messages[AXIS2_ERROR_SERVICE_MODULE_CAN_NOT_REFER_GLOBAL_PHASE] |
| = "Service module can not refer global phase"; |
| /* core:wsdl */ |
| axutil_error_messages[AXIS2_ERROR_WSDL_SCHEMA_IS_NULL] = "Schema is NULL"; |
| /* core:receivers */ |
| axutil_error_messages[AXIS2_ERROR_OM_ELEMENT_INVALID_STATE] = "AXIOM element has invalid state"; |
| axutil_error_messages[AXIS2_ERROR_OM_ELEMENT_MISMATCH] = "AXIOM elements do not match"; |
| axutil_error_messages[AXIS2_ERROR_RPC_NEED_MATCHING_CHILD] |
| = "RPC style SOAP body don't have a child element"; |
| axutil_error_messages[AXIS2_ERROR_UNKNOWN_STYLE] |
| = "Operation description has unknown operation style"; |
| axutil_error_messages[AXIS2_ERROR_STRING_DOES_NOT_REPRESENT_A_VALID_NC_NAME] |
| = "String does not represent a valid NCName"; |
| /* core:transport */ |
| |
| /* core:transport:http */ |
| axutil_error_messages[AXIS2_ERROR_HTTP_CLIENT_TRANSPORT_ERROR] = "Error occurred in transport"; |
| axutil_error_messages[AXIS2_ERROR_HTTP_REQUEST_NOT_SENT] |
| = "A read attempt(HTTP) for the reply without sending the request"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_HEADER] = "Invalid string passed as a HTTP header"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_HTTP_HEADER_START_LINE] |
| = "Invalid status line or invalid request line"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_TRANSPORT_PROTOCOL] |
| = "Transport protocol is unsupported by axis2"; |
| axutil_error_messages[AXIS2_ERROR_NULL_BODY] = "No body present in the request or the response"; |
| axutil_error_messages[AXIS2_ERROR_NULL_CONFIGURATION_CONTEXT] |
| = "A valid configuration context is required for the HTTP worker"; |
| axutil_error_messages[AXIS2_ERROR_NULL_HTTP_VERSION] |
| = "HTTP version cannot be NULL in the status/request line"; |
| axutil_error_messages[AXIS2_ERROR_NULL_IN_STREAM_IN_MSG_CTX] |
| = "Input stream is NULL in message context"; |
| axutil_error_messages[AXIS2_ERROR_NULL_OM_OUTPUT] = "OM output is NULL"; |
| axutil_error_messages[AXIS2_ERROR_NULL_SOAP_ENVELOPE_IN_MSG_CTX] |
| = "NULL SOAP envelope in message context"; |
| axutil_error_messages[AXIS2_ERROR_NULL_STREAM_IN_CHUNKED_STREAM] |
| = "NULL stream in the HTTP chucked stream"; |
| axutil_error_messages[AXIS2_ERROR_NULL_STREAM_IN_RESPONSE_BODY] |
| = "NULL stream in the response body"; |
| axutil_error_messages[AXIS2_ERROR_NULL_URL] = "URL NULL in HTTP client"; |
| axutil_error_messages[AXIS2_ERROR_OUT_TRNSPORT_INFO_NULL] |
| = "Transport information must be set in message context"; |
| axutil_error_messages[AXIS2_ERROR_RESPONSE_CONTENT_TYPE_MISSING] |
| = "Content-Type header missing in HTTP response"; |
| axutil_error_messages[AXIS2_ERROR_RESPONSE_TIMED_OUT] = "Response timed out"; |
| axutil_error_messages[AXIS2_ERROR_SOAP_ENVELOPE_OR_SOAP_BODY_NULL] |
| = "SOAP envelope or SOAP body NULL"; |
| axutil_error_messages[AXIS2_ERROR_SSL_ENGINE] = "Error occurred in SSL engine"; |
| axutil_error_messages[AXIS2_ERROR_SSL_NO_CA_FILE] = "Cannot find certificates"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_RESPONSE] |
| = "Error in writing the response in response writer"; |
| axutil_error_messages[AXIS2_ERROR_REQD_PARAM_MISSING] |
| = "Required parameter is missing in URL encoded request"; |
| axutil_error_messages[AXIS2_ERROR_UNSUPPORTED_SCHEMA_TYPE] = " Unsupported schema type in REST"; |
| axutil_error_messages[AXIS2_ERROR_SVC_OR_OP_NOT_FOUND] = "Service or operation not found"; |
| /* mod_addr */ |
| axutil_error_messages[AXIS2_ERROR_NO_MSG_INFO_HEADERS] = "No messgae info headers"; |
| /* platforms */ |
| |
| /* utils */ |
| axutil_error_messages[AXIS2_ERROR_COULD_NOT_OPEN_FILE] = "Could not open the file"; |
| axutil_error_messages[AXIS2_ERROR_DLL_CREATE_FAILED] = "Failed in creating DLL"; |
| axutil_error_messages[AXIS2_ERROR_DLL_LOADING_FAILED] = "DLL loading failed"; |
| axutil_error_messages[AXIS2_ERROR_ENVIRONMENT_IS_NULL] = "Environment passed is NULL"; |
| axutil_error_messages[AXIS2_ERROR_FILE_NAME_NOT_SET] = "Axis2 File does not have a file name"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_STATE_DLL_DESC] |
| = "DLL description has invalid state of not having valid DLL create function, \ |
| of valid delete function or valid dll_handler"; |
| axutil_error_messages[AXIS2_ERROR_HANDLER_CREATION_FAILED] = "Failed in creating Handler"; |
| axutil_error_messages[AXIS2_ERROR_INDEX_OUT_OF_BOUNDS] = "Array list index out of bounds"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_ADDRESS] = "Invalid IP or hostname"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_FD] |
| = "Trying to do operation on invalid file descriptor"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_SOCKET] |
| = "Trying to do operation on closed/not opened socket"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_STATE_PARAM] = "Parameter not set"; |
| axutil_error_messages[AXIS2_ERROR_MODULE_CREATION_FAILED] = "Module create failed"; |
| axutil_error_messages[AXIS2_ERROR_MSG_RECV_CREATION_FAILED] |
| = "Failed in creating Message Receiver"; |
| axutil_error_messages[AXIS2_ERROR_NO_SUCH_ELEMENT] = "No such element"; |
| axutil_error_messages[AXIS2_ERROR_SOCKET_BIND_FAILED] |
| = "Socket bind failed. Another process may be already using this port"; |
| axutil_error_messages[AXIS2_ERROR_SOCKET_ERROR] |
| = "Error creating a socket. Most probably error returned by OS"; |
| axutil_error_messages[AXIS2_ERROR_SOCKET_LISTEN_FAILED] = "Listen failed for the server socket"; |
| axutil_error_messages[AXIS2_ERROR_SVC_SKELETON_CREATION_FAILED] |
| = "Failed in creating Service Skeleton"; |
| axutil_error_messages[AXIS2_ERROR_TRANSPORT_RECV_CREATION_FAILED] |
| = "Failed in creating Transport Receiver"; |
| axutil_error_messages[AXIS2_ERROR_TRANSPORT_SENDER_CREATION_FAILED] |
| = "Failed in creating Transport Sender"; |
| axutil_error_messages[AXIS2_ERROR_UUID_GEN_FAILED] |
| = "Generation of platform dependent UUID failed"; |
| axutil_error_messages[AXIS2_ERROR_POSSIBLE_DEADLOCK] = "Possible deadlock"; |
| /* WSDL */ |
| axutil_error_messages[AXIS2_ERROR_INTERFACE_OR_PORT_TYPE_NOT_FOUND_FOR_THE_BINDING] |
| = "Interface or Port Type not found for the binding"; |
| axutil_error_messages[AXIS2_ERROR_INTERFACES_OR_PORTS_NOT_FOUND_FOR_PARTIALLY_BUILT_WOM] |
| = "Interfaces or Ports not found for the partially built WOM"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_STATE_WSDL_OP] |
| = "WSDL operation accessed has invalid state"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_STATE_WSDL_SVC] |
| = "WSDL Service accessed has invalid state"; |
| axutil_error_messages[AXIS2_ERROR_MEP_CANNOT_DETERMINE_MEP] = "Cannot determine MEP"; |
| axutil_error_messages[AXIS2_ERROR_WSDL_BINDING_NAME_IS_REQUIRED] |
| = "WSDL binding name is cannot be NULL"; |
| axutil_error_messages[AXIS2_ERROR_WSDL_INTERFACE_NAME_IS_REQUIRED] |
| = "PortType/Interface name cannot be NULL"; |
| axutil_error_messages[AXIS2_ERROR_WSDL_PARSER_INVALID_STATE] |
| = "WSDL parsing has resulted in an invalid state"; |
| axutil_error_messages[AXIS2_ERROR_WSDL_SVC_NAME_IS_REQUIRED] |
| = "WSDL service name cannot be NULL"; |
| /* XML */ |
| |
| /* XML:attachments */ |
| axutil_error_messages[AXIS2_ERROR_ATTACHMENT_MISSING] = "Attachment is missing"; |
| /* XML:om */ |
| axutil_error_messages[AXIS2_ERROR_BUILDER_DONE_CANNOT_PULL] |
| = "XML builder done with pulling. Pull parser cannot pull any more"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_BUILDER_STATE_CANNOT_DISCARD] |
| = "Discard failed because the builder state is invalid"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_BUILDER_STATE_LAST_NODE_NULL] |
| = "Invalid builder state; Builder's last node is NULL"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_DOCUMENT_STATE_ROOT_NULL] |
| = "Invalid document state; Document root is NULL"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_DOCUMENT_STATE_UNDEFINED_NAMESPACE] |
| = "Undefined namespace used"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_EMPTY_NAMESPACE_URI] |
| = "Namespace should have a valid URI"; |
| axutil_error_messages[AXIS2_ERROR_ITERATOR_NEXT_METHOD_HAS_NOT_YET_BEEN_CALLED] |
| = "Next method has not been called so cannot remove" |
| "an element before calling next valid for any om iterator"; |
| axutil_error_messages[AXIS2_ERROR_ITERATOR_REMOVE_HAS_ALREADY_BEING_CALLED] |
| = "Document root is NULL, when it is not supposed to be NULL"; |
| axutil_error_messages[AXIS2_ERROR_XML_READER_ELEMENT_NULL] |
| = "AXIOM XML reader returned NULL element"; |
| axutil_error_messages[AXIS2_ERROR_XML_READER_VALUE_NULL] |
| = "AXIOM XML reader returned NULL value"; |
| /* XML:parser */ |
| axutil_error_messages[AXIS2_ERROR_CREATING_XML_STREAM_READER] |
| = "Error occurred creating XML stream reader"; |
| axutil_error_messages[AXIS2_ERROR_CREATING_XML_STREAM_WRITER] |
| = "Error occurred creating XML stream writer"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_ATTRIBUTE] = "Error in writing attribute"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_ATTRIBUTE_WITH_NAMESPACE] |
| = "Error in writing attribute with namespace"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_ATTRIBUTE_WITH_NAMESPACE_PREFIX] |
| = "Error in writing attribute with namespace prefix"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_COMMENT] = "Error in writing comment"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_DATA_SOURCE] = "Error in writing data source"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_DEFAULT_NAMESPACE] |
| = "Error in writing default namespace"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_DTD] = "Error in writing DDT"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_EMPTY_ELEMENT] |
| = "Error occurred in writing empty element"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_EMPTY_ELEMENT_WITH_NAMESPACE] |
| = "Error occurred in writing empty element with namespace"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_EMPTY_ELEMENT_WITH_NAMESPACE_PREFIX] |
| = "Error in writing empty element with namespace prefix"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_END_DOCUMENT] |
| = "Error occurred in writing end document in XML writer"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_END_ELEMENT] |
| = "Error occurred in writing end element in XML writer"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_PROCESSING_INSTRUCTION] |
| = "Error in writing processing instruction"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_START_DOCUMENT] |
| = "Error occurred in writing start element in start document in XML writer"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_START_ELEMENT] |
| = "Error occurred in writing start element in XML writer"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_START_ELEMENT_WITH_NAMESPACE] |
| = "Error occurred in writing start element with namespace in XML writer"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_START_ELEMENT_WITH_NAMESPACE_PREFIX] |
| = "Error occurred in writing start element with namespace prefix"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_CDATA] = "Error in writing CDATA section"; |
| axutil_error_messages[AXIS2_ERROR_XML_PARSER_INVALID_MEM_TYPE] |
| = "AXIS2_XML_PARSER_TYPE_BUFFER or AXIS2_XML_PARSER_TYPE_DOC is expected"; |
| |
| /* invalid type passed */ |
| axutil_error_messages[AXIS2_ERROR_INVALID_BASE_TYPE] = "Invalid base type passed"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_SOAP_NAMESPACE_URI] |
| = "Invalid SOAP namespace URI found"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_SOAP_VERSION] = "Invalid SOAP version"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_VALUE_FOUND_IN_MUST_UNDERSTAND] |
| = "Invalid value found in must understand"; |
| axutil_error_messages[AXIS2_ERROR_MULTIPLE_CODE_ELEMENTS_ENCOUNTERED] |
| = "Multiple fault code elements encountered in SOAP fault"; |
| axutil_error_messages[AXIS2_ERROR_MULTIPLE_DETAIL_ELEMENTS_ENCOUNTERED] |
| = "Multiple fault detail elements encountered in SOAP fault"; |
| axutil_error_messages[AXIS2_ERROR_MULTIPLE_NODE_ELEMENTS_ENCOUNTERED] |
| = "Multiple fault node elements encountered in SOAP fault"; |
| axutil_error_messages[AXIS2_ERROR_MULTIPLE_REASON_ELEMENTS_ENCOUNTERED] |
| = "Multiple fault reason elements encountered in SOAP fault"; |
| axutil_error_messages[AXIS2_ERROR_MULTIPLE_ROLE_ELEMENTS_ENCOUNTERED] |
| = "Multiple fault role elements encountered in SOAP fault "; |
| axutil_error_messages[AXIS2_ERROR_MULTIPLE_SUB_CODE_VALUES_ENCOUNTERED] |
| = "Multiple fault sub-code value elements encountered"; |
| axutil_error_messages[AXIS2_ERROR_MULTIPLE_VALUE_ENCOUNTERED_IN_CODE_ELEMENT] |
| = "Multiple fault value elements encountered"; |
| axutil_error_messages[AXIS2_ERROR_MUST_UNDERSTAND_SHOULD_BE_1_0_TRUE_FALSE] |
| = "Must understand attribute should have a value of either true or false"; |
| axutil_error_messages[AXIS2_ERROR_OM_ELEMENT_EXPECTED] = "AXIOM element is expected"; |
| axutil_error_messages[AXIS2_ERROR_ONLY_CHARACTERS_ARE_ALLOWED_HERE] |
| = "Processing SOAP 1.1 fault value element should have only" |
| "text as its children"; |
| axutil_error_messages[AXIS2_ERROR_ONLY_ONE_SOAP_FAULT_ALLOWED_IN_BODY] |
| = "Only one SOAP fault is allowed in SOAP body"; |
| axutil_error_messages[AXIS2_ERROR_SOAP11_FAULT_ACTOR_SHOULD_NOT_HAVE_CHILD_ELEMENTS] |
| = "SOAP 1.1 fault actor should not have any child elements"; |
| axutil_error_messages[AXIS2_ERROR_SOAP_BUILDER_ENVELOPE_CAN_HAVE_ONLY_HEADER_AND_BODY] |
| = "SOAP builder found a child element other than header or body in envelope" |
| "element"; |
| axutil_error_messages[AXIS2_ERROR_SOAP_BUILDER_HEADER_BODY_WRONG_ORDER] |
| = "SOAP builder encountered body element first and header next"; |
| axutil_error_messages[AXIS2_ERROR_SOAP_BUILDER_MULTIPLE_BODY_ELEMENTS_ENCOUNTERED] |
| = "SOAP builder multiple body elements encountered"; |
| axutil_error_messages[AXIS2_ERROR_SOAP_BUILDER_MULTIPLE_HEADERS_ENCOUNTERED] |
| = "SOAP builder encountered multiple headers"; |
| axutil_error_messages[AXIS2_ERROR_SOAP_FAULT_CODE_DOES_NOT_HAVE_A_VALUE] |
| = "SOAP fault code does not have a value"; |
| axutil_error_messages[AXIS2_ERROR_SOAP_FAULT_REASON_ELEMENT_SHOULD_HAVE_A_TEXT] |
| = "SOAP fault reason element should have a text value"; |
| axutil_error_messages[AXIS2_ERROR_SOAP_FAULT_ROLE_ELEMENT_SHOULD_HAVE_A_TEXT] |
| = "SOAP fault role element should have a text value"; |
| axutil_error_messages[AXIS2_ERROR_SOAP_FAULT_VALUE_SHOULD_BE_PRESENT_BEFORE_SUB_CODE] |
| = "SOAP fault value should be present before sub-code element in SOAP fault code"; |
| axutil_error_messages[AXIS2_ERROR_SOAP_MESSAGE_DOES_NOT_CONTAIN_AN_ENVELOPE] |
| = "SOAP message does not contain a SOAP envelope element"; |
| axutil_error_messages[AXIS2_ERROR_SOAP_MESSAGE_FIRST_ELEMENT_MUST_CONTAIN_LOCAL_NAME] |
| = "SOAP message's first element should have a localname"; |
| axutil_error_messages[AXIS2_ERROR_THIS_LOCALNAME_IS_NOT_SUPPORTED_INSIDE_THE_REASON_ELEMENT] |
| = "Localname not supported inside a reason element"; |
| axutil_error_messages[AXIS2_ERROR_THIS_LOCALNAME_IS_NOT_SUPPORTED_INSIDE_THE_SUB_CODE_ELEMENT] |
| = "Localname not supported inside the sub-code element"; |
| axutil_error_messages[AXIS2_ERROR_THIS_LOCALNAME_NOT_SUPPORTED_INSIDE_THE_CODE_ELEMENT] |
| = "Localname not supported inside the code element"; |
| axutil_error_messages[AXIS2_ERROR_TRANSPORT_LEVEL_INFORMATION_DOES_NOT_MATCH_WITH_SOAP] |
| = "Transport identified SOAP version does not match with SOAP message version"; |
| axutil_error_messages[AXIS2_ERROR_UNSUPPORTED_ELEMENT_IN_SOAP_FAULT_ELEMENT] |
| = "Unsupported element found in SOAP fault element"; |
| axutil_error_messages[AXIS2_ERROR_WRONG_ELEMENT_ORDER_ENCOUNTERED] |
| = "Wrong element order encountered "; |
| /* services */ |
| axutil_error_messages[AXIS2_ERROR_SVC_SKEL_INVALID_XML_FORMAT_IN_REQUEST] |
| = "Invalid XML format in request"; |
| axutil_error_messages[AXIS2_ERROR_SVC_SKEL_INPUT_OM_NODE_NULL] |
| = "Input OM node NULL, Probably error in SOAP request"; |
| axutil_error_messages[AXIS2_ERROR_SVC_SKEL_INVALID_OPERATION_PARAMETERS_IN_SOAP_REQUEST] |
| = "Invalid parameters for service operation in SOAP request"; |
| |
| axutil_error_messages[AXIS2_ERROR_WSDL_SCHEMA_IS_NULL] = "Schema is NULL"; |
| |
| /* repos */ |
| axutil_error_messages[AXIS2_ERROR_REPOS_NOT_AUTHENTICATED] = "Not authenticated"; |
| axutil_error_messages[AXIS2_ERROR_REPOS_UNSUPPORTED_MODE] = "Unsupported mode"; |
| axutil_error_messages[AXIS2_ERROR_REPOS_EXPIRED] = "Expired"; |
| axutil_error_messages[AXIS2_ERROR_REPOS_NOT_IMPLEMENTED] = "Not implemented"; |
| axutil_error_messages[AXIS2_ERROR_REPOS_NOT_FOUND] = "Not found"; |
| axutil_error_messages[AXIS2_ERROR_REPOS_BAD_SEARCH_TEXT] = "Bad search text"; |
| |
| /* neethi */ |
| axutil_error_messages[AXIS2_ERROR_NEETHI_ELEMENT_WITH_NO_NAMESPACE] |
| = "Element with no namespace"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_POLICY_CREATION_FAILED_FROM_ELEMENT] |
| = "Policy creation failed from element"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_ALL_CREATION_FAILED_FROM_ELEMENT] |
| = "All creation failed from element"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_EXACTLYONE_CREATION_FAILED_FROM_ELEMENT] |
| = "Exactly one creation failed from element"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_REFERENCE_CREATION_FAILED_FROM_ELEMENT] |
| = "Reference creation failed from element"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_ASSERTION_CREATION_FAILED_FROM_ELEMENT] |
| = "Assertion creation failed from element"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_ALL_CREATION_FAILED] = "All creation failed"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_EXACTLYONE_CREATION_FAILED] |
| = "Exactly one creation failed"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_POLICY_CREATION_FAILED] = "Policy creation failed"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_NORMALIZATION_FAILED] = "Normalization failed"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_WRONG_INPUT_FOR_MERGE] = "Wrong input for merge"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_CROSS_PRODUCT_FAILED] = "Cross product failed"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_NO_CHILDREN_POLICY_COMPONENTS] |
| = "No children policy components"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_URI_NOT_SPECIFIED] = "Reference URI not specified"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_NO_ENTRY_FOR_THE_GIVEN_URI] |
| = "No entry for the given URI"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_EXACTLYONE_NOT_FOUND_IN_NORMALIZED_POLICY] |
| = "Exactly one not found in normalized policy"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_EXACTLYONE_IS_EMPTY] = "Exactly one is empty"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_ALL_NOT_FOUND_WHILE_GETTING_CROSS_PRODUCT] |
| = "All not found while getting cross product"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_UNKNOWN_ASSERTION] = "Unknown Assertion"; |
| |
| return AXIS2_SUCCESS; |
| } |
| |
| AXIS2_EXTERN axutil_error_t *AXIS2_CALL |
| axutil_error_create( |
| axutil_allocator_t * allocator) |
| { |
| axutil_error_t *error; |
| if(!allocator) |
| return NULL; |
| |
| error = (axutil_error_t *)AXIS2_MALLOC(allocator, sizeof(axutil_error_t)); |
| memset(error, 0, sizeof(axutil_error_t)); |
| |
| if(!error) |
| return NULL; |
| |
| error->allocator = allocator; |
| error->status_code = AXIS2_SUCCESS; |
| |
| return error; |
| } |
| |
| AXIS2_EXTERN const axis2_char_t *AXIS2_CALL |
| axutil_error_get_message( |
| const axutil_error_t * error) |
| { |
| const axis2_char_t *message = NULL; |
| if(error) |
| { |
| if(error->error_number > AXIS2_ERROR_NONE && error->error_number < AXUTIL_ERROR_MAX) /* TODO; This needs to be |
| fixed to include module defined and user defined errors */ |
| message = axutil_error_messages[error->error_number]; |
| else |
| { |
| if(error->message) |
| { |
| message = error->message; |
| } |
| else if(error->error_number == AXIS2_ERROR_NONE) |
| { |
| message = axutil_error_messages[AXIS2_ERROR_NONE]; |
| } |
| else |
| { |
| message = "Undefined error returned by business logic implementation"; |
| } |
| } |
| } |
| |
| return message; |
| } |
| |
| AXIS2_EXTERN axis2_status_t AXIS2_CALL |
| axutil_error_set_error_number( |
| axutil_error_t * error, |
| axutil_error_codes_t error_number) |
| { |
| if(!error) |
| return AXIS2_FAILURE; |
| error->error_number = error_number; |
| return AXIS2_SUCCESS; |
| } |
| |
| AXIS2_EXTERN axis2_status_t AXIS2_CALL |
| axutil_error_set_status_code( |
| axutil_error_t * error, |
| axis2_status_codes_t status_code) |
| { |
| if(!error) |
| return AXIS2_FAILURE; |
| error->status_code = status_code; |
| return AXIS2_SUCCESS; |
| } |
| |
| AXIS2_EXTERN axis2_status_t AXIS2_CALL |
| axutil_error_get_status_code( |
| axutil_error_t * error) |
| { |
| if(error) |
| return error->status_code; |
| else |
| return AXIS2_CRITICAL_FAILURE; |
| } |
| |
| AXIS2_EXTERN axis2_status_t AXIS2_CALL |
| axutil_error_set_error_message( |
| axutil_error_t * error, |
| axis2_char_t * message) |
| { |
| if(message && error) |
| { |
| error->message = message; |
| return AXIS2_SUCCESS; |
| } |
| |
| return AXIS2_FAILURE; |
| } |
| |
| AXIS2_EXTERN void AXIS2_CALL |
| axutil_error_free( |
| axutil_error_t * error) |
| { |
| if(error) |
| { |
| AXIS2_FREE(error->allocator, error); |
| } |
| return; |
| } |
| |
