---
title: Architecture Design
---

<!--
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
-->

## Table of Contents

- [Table of Contents](#table-of-contents)
- [APISIX](#apisix)
  - [Plugin Loading Process](#plugin-loading-process)
  - [Plugin Hierarchy Structure](#plugin-hierarchy-structure)
- [APISIX Config](#apisix-config)
- [Route](#route)
- [Service](#service)
- [Plugin](#plugin)
- [Script](#script)
- [Upstream](#upstream)
  - [Configuration](#configuration)
    - [Consumer](#consumer)
    - [Cookie](#cookie)
    - [Header](#header)
- [Router](#router)
- [Consumer](#consumer-1)
- [Global Rule](#global-rule)
- [Plugin Config](#plugin-config)
- [Debug mode](#debug-mode)
  - [Basic Debug Mode](#basic-debug-mode)
  - [Advanced Debug Mode](#advanced-debug-mode)

## APISIX

### Plugin Loading Process

![flow-load-plugin](../../assets/images/flow-load-plugin.png)

### Plugin Hierarchy Structure

<img src="../../assets/images/flow-plugin-internal.png" width="50%" height="50%" />

## APISIX Config

There are two methods to configure APISIX: directly change `conf/config.yaml`, or add file path argument using `-c` or `--config` flag when start APISIX like `apisix start -c <path string>`

For example, set the default listening port of APISIX to 8000, and keep other configurations as default. The configuration in `config.yaml` should be like this:

```yaml
apisix:
  node_listen: 8000 # APISIX listening port
```

Set the default listening port of APISIX to 8000, set the `etcd` address to `http://foo:2379`,
and keep other configurations as default. The configuration in `config.yaml` should be like this:

```yaml
apisix:
  node_listen: 8000 # APISIX listening port

etcd:
  host: "http://foo:2379" # etcd address
```

Other default configurations can be found in the `conf/config-default.yaml` file, which is bound to the APISIX source code. **Never** manually modify the `conf/config-default.yaml` file. If you need to customize any configuration, you should update the `config.yaml` file.

**Note** `APISIX` will generate `conf/nginx.conf` file automatically, so please _DO NOT EDIT_ `conf/nginx.conf` file too.

[Back to top](#table-of-contents)

## Route

The route matches the client's request by defining rules, then loads and executes the corresponding plugin based on the matching result, and forwards the request to the specified Upstream.

The route mainly consists of three parts: matching rules (e.g uri, host, remote_addr, etc.), plugin configuration (current-limit & rate-limit, etc.) and upstream information.

The following image shows an example of some Route rules. When some attribute values are the same, the figure is identified by the same color.

<img src="../../assets//images/routes-example.png" width="50%" height="50%" />

We configure all the parameters directly in the Route, it's easy to set up, and each Route has a relatively high degree of freedom. But when our Route has more repetitive configurations (such as enabling the same plugin configuration or upstream information), once we need update these same properties, we have to traverse all the Routes and modify them, so it's adding a lot of complexity of management and maintenance.

The shortcomings mentioned above are independently abstracted in APISIX by the two concepts [Service](#service) and [Upstream](#upstream).

The route example created below is to proxy the request with URL `/index.html` to the Upstream service with the address `39.97.63.215:80`:

```shell
$ curl http://127.0.0.1:9080/apisix/admin/routes/1 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -i -d '
{
    "uri": "/index.html",
    "upstream": {
        "type": "roundrobin",
        "nodes": {
            "39.97.63.215:80": 1
        }
    }
}'

HTTP/1.1 201 Created
Date: Sat, 31 Aug 2019 01:17:15 GMT
Content-Type: text/plain
Transfer-Encoding: chunked
Connection: keep-alive
Server: APISIX web server

{"node":{"value":{"uri":"\/index.html","upstream":{"nodes":{"39.97.63.215:80":1},"type":"roundrobin"}},"createdIndex":61925,"key":"\/apisix\/routes\/1","modifiedIndex":61925},"action":"create"}
```

When we receive a successful response, it indicates that the route was successfully created.

For specific options of Route, please refer to [Admin API](admin-api.md#route).

[Back to top](#table-of-contents)

## Service

A `Service` is an abstraction of an API (which can also be understood as a set of Route abstractions). It usually corresponds to the upstream service abstraction. Between `Route` and `Service`, usually the relationship of N:1, please see the following image.

<img src="../../assets/images/service-example.png" width="50%" height="50%" />

Different Route rules are bound to a Service at the same time. These Routes will have the same upstream and plugin configuration, reducing redundant configuration.

The following example creates a Service that enables the current-limit plugin, and then binds the Route with the id of `100` and `101` to the Service.

```shell
# create new Service
$ curl http://127.0.0.1:9080/apisix/admin/services/200 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
    "plugins": {
        "limit-count": {
            "count": 2,
            "time_window": 60,
            "rejected_code": 503,
            "key": "remote_addr"
        }
    },
    "upstream": {
        "type": "roundrobin",
        "nodes": {
            "39.97.63.215:80": 1
        }
    }
}'

# create new Route and reference the service by id `200`
curl http://127.0.0.1:9080/apisix/admin/routes/100 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
    "methods": ["GET"],
    "uri": "/index.html",
    "service_id": "200"
}'

curl http://127.0.0.1:9080/apisix/admin/routes/101 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
    "methods": ["GET"],
    "uri": "/foo/index.html",
    "service_id": "200"
}'
```

Of course, we can also specify different plugin parameters or upstream for Route. Some of the following Routes have different current-limit parameters. Other parts (such as upstream) continue to use the configuration parameters in Service.

```shell
curl http://127.0.0.1:9080/apisix/admin/routes/102 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
    "uri": "/bar/index.html",
    "id": "102",
    "service_id": "200",
    "plugins": {
        "limit-count": {
            "count": 2000,
            "time_window": 60,
            "rejected_code": 503,
            "key": "remote_addr"
        }
    }
}'
```

Note: When both Route and Service enable the same plugin, the Route parameter has a higher priority than Service.

[Back to top](#table-of-contents)

## Plugin

`Plugin` represents the plugin configuration that will be executed during the `HTTP` request/response lifecycle.

The `Plugin` configuration can be bound directly to `Route` or it can be bound to `Service` or `Consumer`. For the configuration of the same plugin, only one copy is valid, and the configuration selection priority is always `Consumer` > `Route` > `Service`.

In `conf/config.yaml`, you can declare which plugins are supported by the local APISIX node. This is a whitelisting mechanism. Plugins that are not in this whitelist will be automatically ignored. This feature can be used to temporarily turn off or turn on specific plugins, which is very effective in dealing with unexpected situations. If you want to add new plugins based on existing plugins, you need to copy the data of `plugins` node which in `conf/config-default.yaml` to the `plugins` node of `conf/config.yaml`.

The configuration of the plugin can be directly bound to the specified Route, or it can be bound to the Service, but the plugin configuration in Route has a higher priority.

A plugin will only be executed once in a single request, even if it is bound to multiple different objects (such as Route or Service).

The order in which plugins are run is determined by the priority of the plugin itself, for example:

```lua
local _M = {
    version = 0.1,
    priority = 0, -- the priority of this plugin will be 0
    name = plugin_name,
    schema = schema,
    metadata_schema = metadata_schema,
}
```

The plugin configuration is submitted as part of Route or Service and placed under `plugins`. It internally uses the plugin name as the hash's key to hold configuration items for different plugins.

```json
{
    ...
    "plugins": {
        "limit-count": {
            "count": 2,
            "time_window": 60,
            "rejected_code": 503,
            "key": "remote_addr"
        },
        "prometheus": {}
    }
}
```

Not all plugins have specific configuration items. For example, there is no specific configuration item under `prometheus`. In this case, an empty object identifier can be used.

If a request is rejected by a plugin, there will be warn level log like `ip-restriction exits with http status code 403`.

[APISIX supported plugin list](README.md#plugins)

[Back to top](#table-of-contents)

## Script

`Script` represents a script that will be executed during the `HTTP` request/response life cycle.

The `Script` configuration can be directly bound to the `Route`.

`Script` and `Plugin` are mutually exclusive, and `Script` is executed first. This means that after configuring `Script`, the `Plugin` configured on `Route` will not be executed.

In theory, you can write arbitrary Lua code in `Script`, or you can directly call existing plugins to reuse existing code.

`Script` also has the concept of execution phase, supporting `access`, `header_filter`, `body_filter` and `log` phase. The system will automatically execute the code of the corresponding phase in the `Script` script in the corresponding phase.

```json
{
    ...
    "script": "local _M = {} \n function _M.access(api_ctx) \n ngx.log(ngx.INFO,\"hit access phase\") \n end \nreturn _M"
}
```

## Upstream

Upstream is a virtual host abstraction that performs load balancing on a given set of service nodes according to configuration rules. Upstream address information can be directly configured to `Route` (or `Service`). When Upstream has duplicates, you need to use "reference" to avoid duplication.

<img src="../../assets/images/upstream-example.png" width="50%" height="50%" />

As shown in the image above, by creating an Upstream object and referencing it by ID in `Route`, you can ensure that only the value of an object is maintained.

Upstream configuration can be directly bound to the specified `Route` or it can be bound to `Service`, but the configuration in `Route` has a higher priority. The priority behavior here is very similar to `Plugin`.

### Configuration

In addition to the basic complex equalization algorithm selection, APISIX's Upstream also supports logic for upstream passive health check and retry, see the link below.

https://github.com/apache/apisix/blob/master/docs/en/latest/admin-api.md#upstream

Create an upstream object use case:

```json
curl http://127.0.0.1:9080/apisix/admin/upstreams/1 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
    "type": "chash",
    "key": "remote_addr",
    "nodes": {
        "127.0.0.1:80": 1,
        "foo.com:80": 2
    }
}'
```

After the upstream object is created, it can be referenced by specific `Route` or `Service`, for example:

```shell
curl http://127.0.0.1:9080/apisix/admin/routes/1 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
    "uri": "/index.html",
    "upstream_id": 1
}'
```

For convenience, you can also directly bind the upstream address to a `Route` or `Service`, for example:

```shell
curl http://127.0.0.1:9080/apisix/admin/routes/1 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
    "uri": "/index.html",
    "plugins": {
        "limit-count": {
            "count": 2,
            "time_window": 60,
            "rejected_code": 503,
            "key": "remote_addr"
        }
    },
    "upstream": {
        "type": "roundrobin",
        "nodes": {
            "39.97.63.215:80": 1
        }
    }
}'
```

Here's an example of configuring a health check:

```shell
curl http://127.0.0.1:9080/apisix/admin/routes/1 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
    "uri": "/index.html",
    "plugins": {
        "limit-count": {
            "count": 2,
            "time_window": 60,
            "rejected_code": 503,
            "key": "remote_addr"
        }
    },
    "upstream": {
         "nodes": {
            "39.97.63.215:80": 1
        }
        "type": "roundrobin",
        "retries": 2,
        "checks": {
            "active": {
                "http_path": "/status",
                "host": "foo.com",
                "healthy": {
                    "interval": 2,
                    "successes": 1
                },
                "unhealthy": {
                    "interval": 1,
                    "http_failures": 2
                }
            }
        }
    }
}'
```

More details can be found in [Health Checking Documents](health-check.md).

Here are some examples of configurations using different `hash_on` types:

#### Consumer

Create a consumer object:

```shell
curl http://127.0.0.1:9080/apisix/admin/consumers -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
    "username": "jack",
    "plugins": {
       "key-auth": {
            "key": "auth-jack"
        }
    }
}'
```

Create route object and enable `key-auth` plugin authentication:

```shell
curl http://127.0.0.1:9080/apisix/admin/routes/1 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
    "plugins": {
        "key-auth": {}
    },
    "upstream": {
        "nodes": {
            "127.0.0.1:1980": 1,
            "127.0.0.1:1981": 1
        },
        "type": "chash",
        "hash_on": "consumer"
    },
    "uri": "/server_port"
}'
```

Test request, the `consumer_name` after authentication is passed will be used as the hash value of the load balancing hash algorithm:

```shell
curl http://127.0.0.1:9080/server_port -H "apikey: auth-jack"
```

#### Cookie

Create route and upstream object, `hash_on` is `cookie`:

```shell
curl http://127.0.0.1:9080/apisix/admin/routes/1 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
    "uri": "/hash_on_cookie",
    "upstream": {
        "key": "sid",
        "type ": "chash",
        "hash_on ": "cookie",
        "nodes ": {
            "127.0.0.1:1980": 1,
            "127.0.0.1:1981": 1
        }
    }
}'
```

The client requests with `Cookie`:

```shell
 curl http://127.0.0.1:9080/hash_on_cookie -H "Cookie: sid=3c183a30cffcda1408daf1c61d47b274"
```

#### Header

Create route and upstream object, `hash_on` is `header`, `key` is `Content-Type`:

```shell
curl http://127.0.0.1:9080/apisix/admin/routes/1 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
    "uri": "/hash_on_header",
    "upstream": {
        "key": "content-type",
        "type ": "chash",
        "hash_on ": "header",
        "nodes ": {
            "127.0.0.1:1980": 1,
            "127.0.0.1:1981": 1
        }
    }
}'
```

The client requests with header `Content-Type`:

```shell
 curl http://127.0.0.1:9080/hash_on_header -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -H "Content-Type: application/json"
```

[Back to top](#table-of-contents)

## Router

A distinguishing feature of APISIX from other API gateways is that it allows users to choose different routers to better match free services, making the best choice between performance and freedom.

Set the route that best suits your business needs in the local configuration `conf/config.yaml`.

- `apisix.router.http`: HTTP Request Route。

  - `radixtree_uri`: (Default) only use `uri` as the primary index. Support for full and deep prefix matching based on the `radixtree` engine, see [How to use router-radixtree](router-radixtree.md).
    - `Absolute match`: Complete match for the given `uri`, such as `/foo/bar`,`/foo/glo`.
    - `Prefix match`: Use `*` at the end to represent the given `uri` as a prefix match. For example, `/foo*` allows matching `/foo/`, `/foo/a` and `/foo/b`.
    - `match priority`: first try absolute match, if you can't hit absolute match, try prefix match.
    - `Any filter attribute`: Allows you to specify any Nginx built-in variable as a filter, such as URL request parameters, request headers, cookies, and so on.
  - `radixtree_uri_with_parameter`: Like `radixtree_uri` but also support parameter match.
  - `radixtree_host_uri`: Use `host + uri` as the primary index (based on the `radixtree` engine), matching both host and URL for the current request.

- `apisix.router.ssl`: SSL loads the matching route.
  - `radixtree_sni`: (Default) Use `SNI` (Server Name Indication) as the primary index (based on the radixtree engine).

[Back to top](#table-of-contents)

## Consumer

For the API gateway, it is usually possible to identify a certain type of requester by using a domain name such as a request domain name, a client IP address, etc., and then perform plugin filtering and forward the request to the specified upstream, but sometimes the depth is insufficient.

<img src="../../assets/images/consumer-who.png" width="50%" height="50%" />

As shown in the image above, as an API gateway, you should know who the API Consumer is, so you can configure different rules for different API Consumers.

| Field    | Required | Description                                                                                                                                                                                      |
| -------- | -------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
| username | Yes      | Consumer Name.                                                                                                                                                                                   |
| plugins  | No       | The corresponding plugin configuration of the Consumer, which has the highest priority: Consumer > Route > Service. For specific plugin configurations, refer to the [Plugins](#plugin) section. |

In APISIX, the process of identifying a Consumer is as follows:

<img src="../../assets/images/consumer-internal.png" width="50%" height="50%" />

1. Authorization certification: e.g [key-auth](./plugins/key-auth.md), [JWT](./plugins/jwt-auth.md), etc.
2. Get consumer_name: By authorization, you can naturally get the corresponding Consumer `id`, which is the unique identifier of the Consumer object.
3. Get the Plugin or Upstream information bound to the Consumer: Complete the different configurations for different Consumers.

To sum up, Consumer is a consumer of certain types of services and needs to be used in conjunction with the user authentication system.

For example, different consumers request the same API, and the gateway service corresponds to different Plugin or Upstream configurations according to the current request user information.

In addition, you can refer to the [key-auth](./plugins/key-auth.md) authentication authorization plugin call logic to help you further understand the Consumer concept and usage.

How to enable a specific plugin for a Consumer, you can see the following example:

```shell
# Create a Consumer, specify the authentication plugin key-auth, and enable the specific plugin limit-count
$ curl http://127.0.0.1:9080/apisix/admin/consumers -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
    "username": "jack",
    "plugins": {
        "key-auth": {
            "key": "auth-one"
        },
        "limit-count": {
            "count": 2,
            "time_window": 60,
            "rejected_code": 503,
            "key": "remote_addr"
        }
    }
}'

# Create a Router, set routing rules and enable plugin configuration
$ curl http://127.0.0.1:9080/apisix/admin/routes/1 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
    "plugins": {
        "key-auth": {}
    },
    "upstream": {
        "nodes": {
            "127.0.0.1:1980": 1
        },
        "type": "roundrobin"
    },
    "uri": "/hello"
}'

# Send a test request, the first two return to normal, did not reach the speed limit threshold
$ curl http://127.0.0.1:9080/hello -H 'apikey: auth-one' -I
...

$ curl http://127.0.0.1:9080/hello -H 'apikey: auth-one' -I
...

# The third test returns 503 and the request is restricted
$ curl http://127.0.0.1:9080/hello -H 'apikey: auth-one' -I
HTTP/1.1 503 Service Temporarily Unavailable
...

```

Use the [consumer-restriction](plugins/consumer-restriction.md) plug-in to restrict the access of Jack to this API.

```shell
# Add Jack to the blacklist
$ curl http://127.0.0.1:9080/apisix/admin/routes/1 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
    "plugins": {
        "key-auth": {},
        "consumer-restriction": {
            "blacklist": [
                "jack"
            ]
        }
    },
    "upstream": {
        "nodes": {
            "127.0.0.1:1980": 1
        },
        "type": "roundrobin"
    },
    "uri": "/hello"
}'

# Repeated tests, all return 403; Jack is forbidden to access this API
$ curl http://127.0.0.1:9080/hello -H 'apikey: auth-one' -I
HTTP/1.1 403
...

```

[Back to top](#table-of-contents)

## Global Rule

[Plugin](#plugin) just can be binded to [Service](#service) or [Route](#route), if we want a [Plugin](#plugin) work on all requests, how to do it?
We can register a global [Plugin](#plugin) with `GlobalRule`:

```shell
curl -X PUT \
  https://{apisix_listen_address}/apisix/admin/global_rules/1 \
  -H 'Content-Type: application/json' \
  -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' \
  -d '{
        "plugins": {
            "limit-count": {
                "time_window": 60,
                "policy": "local",
                "count": 2,
                "key": "remote_addr",
                "rejected_code": 503
            }
        }
    }'
```

Now, the `limit-count` plugin will work on all requests

we can list all `GlobalRule` via admin api as below:

```shell
curl https://{apisix_listen_address}/apisix/admin/global_rules
```

[Back to top](#table-of-contents)

## Plugin Config

To reuse common plugin configurations, you can extract them into a plugin config and
bind it with a route directly.

For instance, you can do something like:

```shell
# create a plugin config
$ curl http://127.0.0.1:9080/apisix/admin/plugin_configs/1 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -i -d '
{
    "desc": "blah",
    "plugins": {
        "limit-count": {
            "count": 2,
            "time_window": 60,
            "rejected_code": 503
        }
    }
}'

# bind it to route
$ curl http://127.0.0.1:9080/apisix/admin/routes/1 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -i -d '
{
    "uris": ["/index.html"],
    "plugin_config_id": 1,
    "upstream": {
        "type": "roundrobin",
        "nodes": {
            "39.97.63.215:80": 1
        }
    }
}'
```

When we can't find the corresponding plugin config with the id, the requests hit the route will be terminated with HTTP status code 503.

When a route already have `plugins` field configured, the `plugins` in the plugin config
will be merged into it. The same plugin in the plugin config will override one in the `plugins`.

For example,

```
{
    "desc": "I am plugin_config 1",
    "plugins": {
        "ip-restriction": {
            "whitelist": [
                "127.0.0.0/24",
                "113.74.26.106"
            ]
        },
        "limit-count": {
            "count": 2,
            "time_window": 60,
            "rejected_code": 503
        }
    }
}
```

- +

```
{
    "uris": ["/index.html"],
    "plugin_config_id": 1,
    "upstream": {
        "type": "roundrobin",
        "nodes": {
            "39.97.63.215:80": 1
        }
    }
    "plugins": {
        "proxy-rewrite": {
            "uri": "/test/add",
            "scheme": "https",
            "host": "apisix.iresty.com"
        },
        "limit-count": {
            "count": 20,
            "time_window": 60,
            "rejected_code": 503,
            "key": "remote_addr"
        }
    }
}
```

=

```
{
    "uris": ["/index.html"],
    "upstream": {
        "type": "roundrobin",
        "nodes": {
            "39.97.63.215:80": 1
        }
    }
    "plugins": {
        "ip-restriction": {
            "whitelist": [
                "127.0.0.0/24",
                "113.74.26.106"
            ]
        },
        "proxy-rewrite": {
            "uri": "/test/add",
            "scheme": "https",
            "host": "apisix.iresty.com"
        },
        "limit-count": {
            "count": 2,
            "time_window": 60,
            "rejected_code": 503
        }
    }
}
```

[Back to top](#table-of-contents)

## Debug mode

### Basic Debug Mode

Enable basic debug mode just by setting `apisix.enable_debug = true` in `conf/config.yaml` file.

e.g Using both `limit-conn` and `limit-count` plugins for a `/hello` request, there will have a response header called `Apisix-Plugins: limit-conn, limit-count`.

```shell
$ curl http://127.0.0.1:1984/hello -i
HTTP/1.1 200 OK
Content-Type: text/plain
Transfer-Encoding: chunked
Connection: keep-alive
Apisix-Plugins: limit-conn, limit-count
X-RateLimit-Limit: 2
X-RateLimit-Remaining: 1
Server: openresty

hello world
```

If the information can be delivered via HTTP response header, for example, the plugin is in stream
subsystem, the information will be logged in the error log with `warn` level.

### Advanced Debug Mode

Enable advanced debug mode by modifying the configuration in `conf/debug.yaml` file. Because there will be a check every second, only the checker reads the `#END` flag, and the file would be considered as closed.

The checker would judge whether the file data changed according to the last modification time of the file. If there has any change, reload it. If there was no change, skip this check. So it's hot reload for enabling or disabling advanced debug mode.

| Key                             | Optional | Description                                                                                                                               | Default |
| ------------------------------- | -------- | ----------------------------------------------------------------------------------------------------------------------------------------- | ------- |
| hook_conf.enable                | required | Enable/Disable hook debug trace. Target module function's input arguments or returned value would be printed once this option is enabled. | false   |
| hook_conf.name                  | required | The module list name of hook which has enabled debug trace.                                                                               |         |
| hook_conf.log_level             | required | Logging levels for input arguments & returned value.                                                                                      | warn    |
| hook_conf.is_print_input_args   | required | Enable/Disable input arguments print.                                                                                                     | true    |
| hook_conf.is_print_return_value | required | Enable/Disable returned value print.                                                                                                      | true    |

Example:

```yaml
hook_conf:
  enable: false # Enable/Disable Hook Debug Trace
  name: hook_phase # The Module List Name of Hook which has enabled Debug Trace
  log_level: warn # Logging Levels
  is_print_input_args: true # Enable/Disable Input Arguments Print
  is_print_return_value: true # Enable/Disable Returned Value Print

hook_phase: # Module Function List, Name: hook_phase
  apisix: # Referenced Module Name
    - http_access_phase # Function Names：Array
    - http_header_filter_phase
    - http_body_filter_phase
    - http_log_phase
#END
```

[Back to top](#table-of-contents)