---
title: Introducing APISIX's testing framework
---

<!--
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
-->

APISIX uses a testing framework based on test-nginx: https://github.com/openresty/test-nginx.
For details, you can check the [documentation](https://metacpan.org/pod/Test::Nginx) of this project.

If you want to test the CLI behavior of APISIX (`./bin/apisix`),
you need to write a shell script in the t/cli directory to test it. You can refer to the existing test scripts for more details.

If you want to test the others, you need to write test code based on the framework.

Here, we briefly describe how to do simple testing based on this framework.

## Test file

you need to write test cases in the t/ directory, in a corresponding `.t` file. Note that a single test file should not exceed `800` lines, and if it is too long, it needs to be divided by a suffix. For example:

```
t/
├── admin
│ ├── consumers.t
│ ├── consumers2.t
```

Both `consumers.t` and `consumers2.t` contain tests for consumers in the Admin API.

Some of the test files start with this paragraph:

```
add_block_preprocessor(sub {
    my ($block) = @_;

    if (! $block->request) {
        $block->set_value("request", "GET /t");
    }

    if (! $block->no_error_log && ! $block->error_log) {
        $block->set_value("no_error_log", "[error]\n[alert]");
    }
});
```

It means that all tests in this test file that do not define `request` are set to `GET /t`. The same is true for error_log.

## Preparing the configuration

When testing a behavior, we need to prepare the configuration.

If the configuration is from etcd:
We can set up specific configurations through the Admin API.

```
=== TEST 7: refer to empty nodes upstream
--- config
    location /t {
        content_by_lua_block {
            local core = require("apisix.core")
            local t = require("lib.test_admin").test
            local code, message = t('/apisix/admin/routes/1',
                ngx.HTTP_PUT,
                [[{
                    "methods": ["GET"],
                    "upstream_id": "1",
                    "uri": "/index.html"
                }]]
                )

            if code >= 300 then
                ngx.status = code
                ngx.print(message)
                return
            end

            ngx.say(message)
        }
    }
--- request
GET /t
--- response_body
passed
```

Then trigger it in a later test:

```
=== TEST 8: hit empty nodes upstream
--- request
GET /index.html
--- error_code: 503
--- error_log
no valid upstream node
```

## Preparing the upstream

To test the code, we need to provide a mock upstream.

For HTTP request, the upstream code is put in `t/lib/server.lua`. HTTP request with
a given `path` will trigger the method in the same name. For example, a call to `/server_port`
will call the `_M.server_port`.

For TCP request, a dummy upstream is used:

```
local sock = ngx.req.socket()
local data = sock:receive("1")
ngx.say("hello world")
```

If you want to custom the TCP upstream logic, you can use:

```
--- stream_upstream_code
local sock = ngx.req.socket()
local data = sock:receive("1")
ngx.sleep(0.2)
ngx.say("hello world")
```

## Send request

We can initiate a request with `request` and set the request headers with `more_headers`.

For example.

```
--- request
PUT /hello?xx=y&xx=z&&y=&&z
body part of the request
--- more_headers
X-Req: foo
X-Req: bar
X-Resp: cat
```

Lua code can be used to send multiple requests.

One request after another:

```
--- config
    location /t {
        content_by_lua_block {
            local http = require "resty.http"
            local uri = "http://127.0.0.1:" .. ngx.var.server_port
                        .. "/server_port"

            local ports_count = {}
            for i = 1, 12 do
                local httpc = http.new()
                local res, err = httpc:request_uri(uri, {method = "GET"})
                if not res then
                    ngx.say(err)
                    return
                end
                ports_count[res.body] = (ports_count[res.body] or 0) + 1
            end
        }
    }
```

Sending multiple requests concurrently:

```
--- config
    location /t {
        content_by_lua_block {
            local http = require "resty.http"
            local uri = "http://127.0.0.1:" .. ngx.var.server_port
                        .. "/server_port?var=2&var2="


            local t = {}
            local ports_count = {}
            for i = 1, 180 do
                local th = assert(ngx.thread.spawn(function(i)
                    local httpc = http.new()
                    local res, err = httpc:request_uri(uri..i, {method = "GET"})
                    if not res then
                        ngx.log(ngx.ERR, err)
                        return
                    end
                    ports_count[res.body] = (ports_count[res.body] or 0) + 1
                end, i))
                table.insert(t, th)
            end
            for i, th in ipairs(t) do
                ngx.thread.wait(th)
            end
        }
    }
```

## Send TCP request

We can use `stream_request` to send a TCP request, for example:

```
--- stream_request
hello
```

To send a TLS over TCP request, we can combine `stream_tls_request` with `stream_sni`:

```
--- stream_tls_request
mmm
--- stream_sni: xx.com
```

## Assertions

The following assertions are commonly used.

Check status (if not set, the framework will check if the request has 200 status code).

```
--- error_code: 405
```

Check response headers.

```
--- response_headers
X-Resp: foo
X-Req: foo, bar
```

Check response body.

```
--- response_body
[{"count":12, "port": "1982"}]
```

Check the TCP response.

When the request is sent via `stream_request`:

```
--- stream_response
receive stream response error: connection reset by peer
```

When the request is sent via `stream_tls_request`:

```
--- response_body
receive stream response error: connection reset by peer
```

Checking the error log (via grep error log with regular expression).

```
--- grep_error_log eval
qr/hash_on: header|chash_key: "custom-one"/
--- grep_error_log_out
hash_on: header
chash_key: "custom-one"
hash_on: header
chash_key: "custom-one"
hash_on: header
chash_key: "custom-one"
hash_on: header
chash_key: "custom-one"
```

The default log level is `info`, but you can get the debug level log with `--- log_level: debug`.

## Upstream

The test framework listens to multiple ports when it is started.

* 1980/1981/1982/5044: HTTP upstream port. We provide a mock upstream server for testing. See below for more information.
* 1983: HTTPS upstream port
* 1984: APISIX HTTP port. Can be used to verify HTTP related gateway logic, such as concurrent access to an API.
* 1985: APISIX TCP port. Can be used to verify TCP related gateway logic, such as concurrent access to an API.
* 1994: APISIX HTTPS port. Can be used to verify HTTPS related gateway logic, such as testing certificate matching logic.
* 1995: TCP upstream port
* 2005: APISIX TLS over TCP port. Can be used to verify TLS over TCP related gateway logic, such as concurrent access to an API.

The methods in `t/lib/server.lua` are executed when accessing the upstream port. `_M.go` is the entry point for this file.
When the request accesses the upstream `/xxx`, the `_M.xxx` method is executed. For example, a request for `/hello` will execute `_M.hello`.
This allows us to write methods inside `t/lib/server.lua` to emulate specific upstream logic, such as sending special responses.

Note that before adding new methods to `t/lib/server.lua`, make sure that you can reuse existing methods.

## Run the test

Assume your current work directory is the root of the apisix source code.

1. Git clone the latest [test-nginx](https://github.com/openresty/test-nginx) to `../test-nginx`.
2. Run the test: `prove -I. -I../test-nginx/inc -I../test-nginx/lib -r t/path/to/file.t`.

## Tips

### Debugging test cases

The Nginx configuration and logs generated by the test cases are located in the t/servroot directory. The Nginx configuration template for testing is located in t/APISIX.pm.

### Running only some test cases

Three notes can be used to control which parts of the tests are executed.

FIRST & LAST:

```
=== TEST 1: vars rule with ! (set)
--- FIRST
--- config
...
--- response_body
passed


=== TEST 2: vars rule with ! (hit)
--- request
GET /hello?name=jack&age=17
--- LAST
--- error_code: 403
--- response_body
Fault Injection!
```

ONLY:

```
=== TEST 1: list empty resources
--- ONLY
--- config
...
--- response_body
{"count":0,"node":{"dir":true,"key":"/apisix/upstreams","nodes":[]}}
```

### Executing Shell Commands

It is possible to execute shell commands while writing tests in test-nginx for APISIX. We expose this feature via `exec` code block. The `stdout` of the executed process can be captured via `response_body` code block and `stderr` (if any) can be captured by filtering error.log through `grep_error_log`. Here is an example:

```
=== TEST 1: check exec stdout
--- exec
echo hello world
--- response_body
hello world


=== TEST 2: when exec returns an error
--- exec
echxo hello world
--- grep_error_log eval
qr/failed to execute the script [ -~]*/
--- grep_error_log_out
failed to execute the script with status: 127, reason: exit, stderr: /bin/sh: 1: echxo: not found
```