#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

global:
  imagePullSecrets: []


apisix:
  # Enable or disable Apache APISIX itself
  # Set it to false and ingress-controller.enabled=true will deploy only ingress-controller
  enabled: true

  # Enable nginx IPv6 resolver
  enableIPv6: true

  # Use Pod metadata.uid as the APISIX id.
  setIDFromPodUID: false

  customLuaSharedDicts: []
    # - name: foo
    #   size: 10k
    # - name: bar
    #   size: 1m
  luaModuleHook:
    enabled: false
    # extend lua_package_path to load third party code
    luaPath: ""
    # the hook module which will be used to inject third party code into APISIX
    # use the lua require style like: "module.say_hello"
    hookPoint: ""
    # configmap that stores the codes
    configMapRef:
      name: ""
      # mounts decides how to mount the codes to the container.
      mounts:
      - key: ""
        path: ""

  enableCustomizedConfig: false
  customizedConfig: {}

  image:
    repository: apache/apisix
    pullPolicy: IfNotPresent
    # Overrides the image tag whose default is the chart appVersion.
    tag: 2.13.1-alpine

  # Use a `DaemonSet` or `Deployment`
  kind: Deployment
  # kind is DaemonSet,replicaCount not become effective
  replicaCount: 1

  podAnnotations: {}
  podSecurityContext: {}
    # fsGroup: 2000
  securityContext: {}
    # capabilities:
    #   drop:
    #   - ALL
    # readOnlyRootFilesystem: true
    # runAsNonRoot: true
    # runAsUser: 1000

  # See https://kubernetes.io/docs/tasks/run-application/configure-pdb/ for more details
  podDisruptionBudget:
    enabled: false
    minAvailable: 90%
    maxUnavailable: 1

  resources: {}
    # We usually recommend not to specify default resources and to leave this as a conscious
    # choice for the user. This also increases chances charts run on environments with little
    # resources, such as Minikube. If you do want to specify resources, uncomment the following
    # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
    # limits:
    #   cpu: 100m
    #   memory: 128Mi
    # requests:
    #   cpu: 100m
    #   memory: 128Mi

  nodeSelector: {}
  tolerations: []
  affinity: {}
  # If true, it will sets the anti-affinity of the Pod.
  podAntiAffinity:
    enabled: false

  # timezone is the timezone where apisix uses.
  # For example: "UTC" or "Asia/Shanghai"
  # This value will be set on apisix container's environment variable TZ.
  # You may need to set the timezone to be consistent with your local time zone,
  # otherwise the apisix's logs may used to retrieve event maybe in wrong timezone.
  timezone: ""

  # extraEnvVars An array to add extra env vars
  # e.g:
  # extraEnvVars:
  #   - name: FOO
  #     value: "bar"
  #   - name: FOO2
  #     valueFrom:
  #       secretKeyRef:
  #         name: SECRET_NAME
  #         key: KEY
  extraEnvVars: []

nameOverride: ""
fullnameOverride: ""


gateway:
  type: NodePort
  # If you want to keep the client source IP, you can set this to Local.
  # ref: https://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
  externalTrafficPolicy: Cluster
  # type: LoadBalancer
  # annotations:
  #   service.beta.kubernetes.io/aws-load-balancer-type: nlb
  externalIPs: []
  http:
    enabled: true
    servicePort: 80
    containerPort: 9080
  tls:
    enabled: false
    servicePort: 443
    containerPort: 9443
    existingCASecret: ""
    certCAFilename: ""
    http2:
      enabled: true
  stream:  # L4 proxy (TCP/UDP)
    enabled: false
    only: false
    tcp: []
    udp: []
  ingress:
    enabled: false
    annotations: {}
      # kubernetes.io/ingress.class: nginx
      # kubernetes.io/tls-acme: "true"
    hosts:
      - host: apisix.local
        paths: []
    tls: []
  #  - secretName: apisix-tls
  #    hosts:
  #      - chart-example.local


admin:
  # Enable Admin API
  enabled: true
  # admin service type
  type: ClusterIP
  # loadBalancerIP: a.b.c.d
  # loadBalancerSourceRanges:
  #   - "143.231.0.0/16"
  externalIPs: []
  #
  port: 9180
  servicePort: 9180
  # Admin API support CORS response headers
  cors: true
  # Admin API credentials
  credentials:
    admin: edd1c9f034335f136f87ad84b625c8f1
    viewer: 4054f7cf07e344346cd3f287985e76a2

  allow:
    # The ip range for allowing access to Apache APISIX
    ipList:
      - 127.0.0.1/24


# APISIX plugins to be enabled
plugins:
  - api-breaker
  - authz-keycloak
  - basic-auth
  - batch-requests
  - consumer-restriction
  - cors
  - echo
  - fault-injection
  - grpc-transcode
  - hmac-auth
  - http-logger
  - ip-restriction
  - ua-restriction
  - jwt-auth
  - kafka-logger
  - key-auth
  - limit-conn
  - limit-count
  - limit-req
  - node-status
  - openid-connect
  - authz-casbin
  - prometheus
  - proxy-cache
  - proxy-mirror
  - proxy-rewrite
  - redirect
  - referer-restriction
  - request-id
  - request-validation
  - response-rewrite
  - serverless-post-function
  - serverless-pre-function
  - sls-logger
  - syslog
  - tcp-logger
  - udp-logger
  - uri-blocker
  - wolf-rbac
  - zipkin
  - traffic-split
  - gzip
  - real-ip
  - ext-plugin-pre-req
  - ext-plugin-post-req
stream_plugins:
  - mqtt-proxy
  - ip-restriction
  - limit-conn

pluginAttrs: {}

extPlugin:
  enabled: false
  cmd: ["/path/to/apisix-plugin-runner/runner", "run"]

# customPlugins allows you to mount your own HTTP plugins.
customPlugins:
  enabled: false
  # the lua_path that tells APISIX where it can find plugins,
  # note the last ';' is required.
  luaPath: "/opts/custom_plugins/?.lua"
  plugins:
      # plugin name.
    - name: ""
      # plugin attrs
      attrs: |
      # plugin codes can be saved inside configmap object.
      configMap:
        # name of configmap.
        name: ""
        # since keys in configmap is flat, mountPath allows to define the mount
        # path, so that plugin codes can be mounted hierarchically.
        mounts:
          - key: ""
            path: ""
          - key: ""
            path: ""

updateStrategy: {}
  # type: RollingUpdate

extraVolumes: []
# - name: extras
#   emptyDir: {}

extraVolumeMounts: []
# - name: extras
#   mountPath: /usr/share/extras
#   readOnly: true

discovery:
  enabled: false
  registry:
      # Integration service discovery registry. E.g eureka\dns\nacos\consul_kv
      # reference:
      # https://apisix.apache.org/docs/apisix/discovery#configuration-for-eureka
      # https://apisix.apache.org/docs/apisix/discovery/dns#service-discovery-via-dns
      # https://apisix.apache.org/docs/apisix/discovery/consul_kv#configuration-for-consul-kv
      # https://apisix.apache.org/docs/apisix/discovery/nacos#configuration-for-nacos
      #
      # an eureka example:
      # eureka:
      #   host:
      #     - "http://${username}:${password}@${eureka_host1}:${eureka_port1}"
      #     - "http://${username}:${password}@${eureka_host2}:${eureka_port2}"
      #   prefix: "/eureka/"
      #   fetch_interval: 30
      #   weight: 100
      #   timeout:
      #     connect: 2000
      #     send: 2000
      #     read: 5000

# access log and error log configuration
logs:
  enableAccessLog: true
  accessLog: "/dev/stdout"
  accessLogFormat: '$remote_addr - $remote_user [$time_local] $http_host \"$request\" $status $body_bytes_sent $request_time \"$http_referer\" \"$http_user_agent\" $upstream_addr $upstream_status $upstream_response_time \"$upstream_scheme://$upstream_host$upstream_uri\"'
  accessLogFormatEscape: default
  errorLog: "/dev/stderr"
  errorLogLevel: "warn"

dns:
  resolvers:
    - 127.0.0.1
    - 172.20.0.10
    - 114.114.114.114
    - 223.5.5.5
    - 1.1.1.1
    - 8.8.8.8
  validity: 30
  timeout: 5


autoscaling:
  enabled: false
  minReplicas: 1
  maxReplicas: 100
  targetCPUUtilizationPercentage: 80
  targetMemoryUtilizationPercentage: 80

# Custom configuration snippet.
configurationSnippet:
  main: |

  httpStart: |

  httpEnd: |

  httpSrv: |

  httpAdmin: |

  stream: |

# Observability configuration.
# ref: https://apisix.apache.org/docs/apisix/plugins/prometheus/
serviceMonitor:
  enabled: false
  # namespace where the serviceMonitor is deployed, by default, it is the same as the namespace of the apisix
  namespace: ""
  # name of the serviceMonitor, by default, it is the same as the apisix fullname
  name: ""
  # interval at which metrics should be scraped
  interval: 15s
  # path of the metrics endpoint
  path: /apisix/prometheus/metrics
  # prefix of the metrics
  metricPrefix: apisix_
  # container port where the metrics are exposed
  containerPort: 9091
  # @param serviceMonitor.labels ServiceMonitor extra labels
  labels: {}
  # @param serviceMonitor.annotations ServiceMonitor annotations
  annotations: {}

# etcd configuration
# use the FQDN address or the IP of the etcd
etcd:
  # install etcd(v3) by default, set false if do not want to install etcd(v3) together
  enabled: true
  host:
    - http://etcd.host:2379  # host or ip e.g. http://172.20.128.89:2379
  prefix: "/apisix"
  timeout: 30

  # if etcd.enabled is true, set more values of bitnami/etcd helm chart
  auth:
    rbac:
      # No authentication by default
      create: false
      user: ""
      password: ""
    tls:
      enabled: false
      existingSecret: ""
      certFilename: ""
      certKeyFilename: ""
      verify: true
      sni: ""

  service:
    port: 2379

  replicaCount: 3


dashboard:
  enabled: false


ingress-controller:
  enabled: false