#! /bin/sh

# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#     https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# Extract launch and ant arguments, (see details below).
ant_exec_args=
no_config=false
use_jikes_default=false
ant_exec_debug=false
show_help=false

if [ -z "$PROTECT_NL" ]; then
  PROTECT_NL=true
  os=`uname -s`
  rel=`uname -r`
  # heirloom bourne-shell used by Solaris 10 is not POSIX
  # it lacks features necessary to protect trailing NL from subshell trimming
  if [ "$os" = SunOS -a "$rel" = "5.10" ]; then
    PROTECT_NL=false
  fi
fi

for arg in "$@"; do
  if [ "$arg" = "--noconfig" ]; then
    no_config=true
  elif [ "$arg" = "--usejikes" ]; then
    use_jikes_default=true
  elif [ "$arg" = "--execdebug" ]; then
    ant_exec_debug=true
  elif [ my"$arg" = my"--h" -o my"$arg" = my"--help"  ]; then
    show_help=true
    ant_exec_args="$ant_exec_args -h"
  else
    if [  my"$arg" = my"-h" -o  my"$arg" = my"-help" ]; then
      show_help=true
    fi

    if [ "$PROTECT_NL" = "true" ]; then
      # pad the value with X to protect trailing NLs from subshell output trimming
      esc_arg="${arg}X"
    else
      esc_arg="${arg}"
    fi

    # wrap all arguments as "" strings, escape any internal back-slash, double-quote, $, or back-tick characters
    #  use printf to avoid echo interpretation behaviors such as escapes and line continuation
    # Mac bsd_sed does not support group-0, so pattern uses group-1
    # Solaris sed only processes lines with trailing newline, passing in an extra newline
    # subshell (heirloom and posix) will trim the added trailing newline
    esc_arg="`printf '%s\n' "$esc_arg" | sed -e 's@\([$\"\`\\]\)@\\\\\\1@g' `"

    if [ "$PROTECT_NL" = "true" ]; then
      # remove the padding X added above, this syntax is POSIX compatible but not heirloom-sh
      esc_arg="${esc_arg%X}"
    fi
    quoted_arg="\"$esc_arg\""

    if $ant_exec_debug; then
      # using printf to avoid echo line continuation and escape interpretation
      printf "arg       : %s\n" "$arg"
      printf "quoted_arg: %s\n" "$quoted_arg"
    fi
    ant_exec_args="$ant_exec_args $quoted_arg"
  fi
done

# Source/default ant configuration
if $no_config; then
  rpm_mode=false
  usejikes=$use_jikes_default
else
  # load system-wide ant configuration (ONLY if ANT_HOME has NOT been set)
  if [ -z "$ANT_HOME" -o "$ANT_HOME" = "/usr/share/ant" ]; then
    if [ -f "/etc/ant.conf" ]; then
      . /etc/ant.conf
    fi
  fi

  # load user ant configuration
  if [ -f "$HOME/.ant/ant.conf" ]; then
    . $HOME/.ant/ant.conf
  fi
  if [ -f "$HOME/.antrc" ]; then
    . "$HOME/.antrc"
  fi

  # provide default configuration values
  if [ -z "$rpm_mode" ]; then
    rpm_mode=false
  fi
  if [ -z "$usejikes" ]; then
    usejikes=$use_jikes_default
  fi
fi

# Setup Java environment in rpm mode
if $rpm_mode; then
  if [ -f /usr/share/java-utils/java-functions ]; then
    . /usr/share/java-utils/java-functions
    set_jvm
    set_javacmd
  fi
fi

# OS specific support.  $var _must_ be set to either true or false.
cygwin=false;
darwin=false;
mingw=false;
case "`uname`" in
  CYGWIN*)
    cygwin=true
    ;;
  Darwin*)
    darwin=true
    if [ -z "$JAVA_HOME" ]; then
      if [ -x '/usr/libexec/java_home' ]; then
        JAVA_HOME=`/usr/libexec/java_home`
      elif [ -d "/System/Library/Frameworks/JavaVM.framework/Versions/CurrentJDK/Home" ]; then
        JAVA_HOME=/System/Library/Frameworks/JavaVM.framework/Versions/CurrentJDK/Home
      fi
    fi
    ;;
  MINGW*)
    mingw=true
    ;;
esac

if [ -z "$ANT_HOME" -o ! -d "$ANT_HOME" ]; then
  ## resolve links - $0 may be a link to ant's home
  PRG="$0"
  progname=`basename "$0"`

  # need this for relative symlinks
  while [ -h "$PRG" ]; do
    ls=`ls -ld "$PRG"`
    link=`expr "$ls" : '.*-> \(.*\)$'`
    if expr "$link" : '/.*' > /dev/null; then
      PRG="$link"
    else
      PRG=`dirname "$PRG"`"/$link"
    fi
  done

  ANT_HOME=`dirname "$PRG"`/..

  # make it fully qualified
  ANT_HOME=`cd "$ANT_HOME" > /dev/null && pwd`
fi

# For Cygwin and Mingw, ensure paths are in UNIX format before
# anything is touched
if $cygwin; then
  [ -n "$ANT_HOME" ] && ANT_HOME=`cygpath --unix "$ANT_HOME"`
  [ -n "$JAVA_HOME" ] && JAVA_HOME=`cygpath --unix "$JAVA_HOME"`
fi
if $mingw; then
  [ -n "$ANT_HOME" ] && ANT_HOME="`(cd "$ANT_HOME"; pwd)`"
  [ -n "$JAVA_HOME" ] && JAVA_HOME="`(cd "$JAVA_HOME"; pwd)`"
fi

# set ANT_LIB location
ANT_LIB="${ANT_HOME}/lib"

if [ -z "$JAVACMD" ]; then
  if [ -n "$JAVA_HOME" ]; then
    # IBM's JDK on AIX uses strange locations for the executables
    if [ -x "$JAVA_HOME/jre/sh/java" ]; then
      JAVACMD="$JAVA_HOME/jre/sh/java"
    elif [ -x "$JAVA_HOME/jre/bin/java" ]; then
      JAVACMD="$JAVA_HOME/jre/bin/java"
    else
      JAVACMD="$JAVA_HOME/bin/java"
    fi
  else
    JAVACMD=`which java 2> /dev/null `
    if [ -z "$JAVACMD" ]; then
      JAVACMD=java
    fi
  fi
fi

if [ ! -x "$JAVACMD" ]; then
  echo "We cannot run Java, please ensure you have Java installed."
  echo "  We have tried to execute $JAVACMD but failed."
  echo "If you have installed Java in a unusual place you can set JAVA_HOME"
  echo "to the directory containing the Java installation."
  exit 1
fi

# Build local classpath using just the launcher in non-rpm mode or
# use the Jpackage helper in rpm mode with basic and default jars
# specified in the ant.conf configuration. Because the launcher is
# used, libraries linked in ANT_HOME/lib will also be included, but this
# is discouraged as it is not java-version safe. A user should
# request optional jars and their dependencies via the OPT_JAR_LIST
# variable
if $rpm_mode && [ -x /usr/bin/build-classpath ]; then
  LOCALCLASSPATH="$(/usr/bin/build-classpath ant ant-launcher jaxp_parser_impl xml-commons-apis)"

  # If no optional jars have been specified then build the default list
  if [ -z "$OPT_JAR_LIST" ]; then
    for file in /etc/ant.d/*; do
      if [ -f "$file" ]; then
        case "$file" in
          *~|*#*|*.rpmsave|*.rpmnew)
          ;;
          *)
            for dep in `cat "$file"`; do
              OPT_JAR_LIST="$OPT_JAR_LIST${OPT_JAR_LIST:+ }$dep"
            done
          ;;
        esac
      fi
    done
  fi

  # If the user requested to try to add some other jars to the classpath
  if [ -n "$OPT_JAR_LIST" ]; then
    _OPTCLASSPATH="$(/usr/bin/build-classpath $OPT_JAR_LIST 2> /dev/null)"
    if [ -n "$_OPTCLASSPATH" ]; then
      LOCALCLASSPATH="$LOCALCLASSPATH:$_OPTCLASSPATH"
    fi
  fi

  # Explicitly add javac path to classpath, assume JAVA_HOME set
  # properly in rpm mode
  if [ -f "$JAVA_HOME/lib/tools.jar" ]; then
    LOCALCLASSPATH="$LOCALCLASSPATH:$JAVA_HOME/lib/tools.jar"
  fi
  if [ -f "$JAVA_HOME/lib/classes.zip" ]; then
    LOCALCLASSPATH="$LOCALCLASSPATH:$JAVA_HOME/lib/classes.zip"
  fi

  # if CLASSPATH_OVERRIDE env var is set, LOCALCLASSPATH will be
  # user CLASSPATH first and ant-found jars after.
  # In that case, the user CLASSPATH will override ant-found jars
  #
  # if CLASSPATH_OVERRIDE is not set, we'll have the normal behaviour
  # with ant-found jars first and user CLASSPATH after
  if [ -n "$CLASSPATH" ]; then
    # merge local and specified classpath
    if [ -z "$LOCALCLASSPATH" ]; then
      LOCALCLASSPATH="$CLASSPATH"
    elif [ -n "$CLASSPATH_OVERRIDE" ]; then
      LOCALCLASSPATH="$CLASSPATH:$LOCALCLASSPATH"
    else
      LOCALCLASSPATH="$LOCALCLASSPATH:$CLASSPATH"
    fi

    # remove class path from launcher -cp option
    CLASSPATH=""
  fi
else
  # not using rpm_mode; use launcher to determine classpaths
  if [ -z "$LOCALCLASSPATH" ]; then
    LOCALCLASSPATH=$ANT_LIB/ant-launcher.jar
  else
    LOCALCLASSPATH=$ANT_LIB/ant-launcher.jar:$LOCALCLASSPATH
  fi
fi

if [ -n "$JAVA_HOME" ]; then
  # OSX hack to make Ant work with jikes
  if $darwin; then
    OSXHACK="${JAVA_HOME}/../Classes"
    if [ -d "${OSXHACK}" ]; then
      for i in "${OSXHACK}"/*.jar; do
        JIKESPATH="$JIKESPATH:$i"
      done
    fi
  fi
fi

# Allow Jikes support (off by default)
if $usejikes; then
  ANT_OPTS="$ANT_OPTS -Dbuild.compiler=jikes"
fi

# For Cygwin, switch paths to appropriate format before running java
# For PATHs convert to unix format first, then to windows format to ensure
# both formats are supported. Probably this will fail on directories with ;
# in the name in the path. Let's assume that paths containing ; are more
# rare than windows style paths on cygwin.
if $cygwin; then
  if [ "$OS" = "Windows_NT" ] && cygpath -m .>/dev/null 2>/dev/null; then
    format=mixed
  else
    format=windows
  fi
  [ -n "$ANT_HOME" ] && ANT_HOME=`cygpath --$format "$ANT_HOME"`
  ANT_LIB=`cygpath --$format "$ANT_LIB"`
  [ -n "$JAVA_HOME" ] && JAVA_HOME=`cygpath --$format "$JAVA_HOME"`
  LCP_TEMP=`cygpath --path --unix "$LOCALCLASSPATH"`
  LOCALCLASSPATH=`cygpath --path --$format "$LCP_TEMP"`
  if [ -n "$CLASSPATH" ]; then
    CP_TEMP=`cygpath --path --unix "$CLASSPATH"`
    CLASSPATH=`cygpath --path --$format "$CP_TEMP"`
  fi
  CYGHOME=`cygpath --$format "$HOME"`
fi

# Show script help if requested
if $show_help; then
  echo $0 '[script options] [options] [target [target2 [target3] ..]]'
  echo 'Script Options:'
  echo '  --help, --h            print this message and ant help'
  echo '  --noconfig             suppress sourcing of /etc/ant.conf,'
  echo '                         $HOME/.ant/ant.conf, and $HOME/.antrc'
  echo '                         configuration files'
  echo '  --usejikes             enable use of jikes by default, unless'
  echo '                         set explicitly in configuration files'
  echo '  --execdebug            print ant exec line generated by this'
  echo '                         launch script'
  echo ''
fi
# add a second backslash to variables terminated by a backslash under cygwin
if $cygwin; then
  case "$ANT_HOME" in
    *\\ )
      ANT_HOME="$ANT_HOME\\"
    ;;
  esac
  case "$CYGHOME" in
    *\\ )
      CYGHOME="$CYGHOME\\"
    ;;
  esac
  case "$JIKESPATH" in
    *\\ )
      JIKESPATH="$JIKESPATH\\"
    ;;
  esac
  case "$LOCALCLASSPATH" in
    *\\ )
      LOCALCLASSPATH="$LOCALCLASSPATH\\"
    ;;
  esac
  case "$CLASSPATH" in
    *\\ )
      CLASSPATH="$CLASSPATH\\"
    ;;
  esac
fi
# Execute ant using eval/exec to preserve spaces in paths,
# java options, and ant args
ant_sys_opts=
if [ -n "$CYGHOME" ]; then
  if [ -n "$JIKESPATH" ]; then
    ant_sys_opts="-Djikes.class.path=\"$JIKESPATH\" -Dcygwin.user.home=\"$CYGHOME\""
  else
    ant_sys_opts="-Dcygwin.user.home=\"$CYGHOME\""
  fi
else
  if [ -n "$JIKESPATH" ]; then
    ant_sys_opts="-Djikes.class.path=\"$JIKESPATH\""
  fi
fi
ant_exec_command="exec \"\$JAVACMD\" $ANT_OPTS -classpath \"\$LOCALCLASSPATH\" -Dant.home=\"\$ANT_HOME\" -Dant.library.dir=\"\$ANT_LIB\" $ant_sys_opts org.apache.tools.ant.launch.Launcher $ANT_ARGS -cp \"\$CLASSPATH\""
if $ant_exec_debug; then
  # using printf to avoid echo line continuation and escape interpretation confusion
  printf "%s\n" "$ant_exec_command $ant_exec_args"
fi

eval "$ant_exec_command $ant_exec_args"