blob: b116f127bef4348ad3938a1ad4160134d8cf0261 [file] [log] [blame]
<!DOCTYPE html>
<!--
Licensed to the Apache Software Foundation (ASF) under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The ASF licenses this file to You under the Apache License, Version 2.0
(the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
https://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<html lang="en">
<head>
<link rel="stylesheet" type="text/css" href="stylesheets/style.css">
<title>Tutorial: Tasks using Properties, Filesets &amp; Paths</title>
</head>
<body>
<h1>Tutorial: Tasks using Properties, Filesets &amp; Paths</h1>
<p>After reading the tutorial about <a href="tutorial-writing-tasks.html">writing tasks [1]</a> this tutorial explains
how to get and set properties and how to use nested filesets and paths. Finally it explains how to contribute tasks to
Apache Ant.</p>
<h2>Content</h2>
<ul>
<li><a href="#goal">The goal</a></li>
<li><a href="#buildenvironment">Build environment</a></li>
<li><a href="#propertyaccess">Property access</a></li>
<li><a href="#filesets">Using filesets</a></li>
<li><a href="#path">Using nested paths</a></li>
<li><a href="#returning-list">Returning a list</a></li>
<li><a href="#documentation">Documentation</a></li>
<li><a href="#contribute">Contribute the new task</a></li>
<li><a href="#resources">Resources</a></li>
</ul>
<h2 id="goal">The goal</h2>
<p>The goal is to write a task, which searches in a path for a file and saves the location of that file in a
property.</p>
<h2 id="buildenvironment">Build environment</h2>
<p>We can use the buildfile from the other tutorial and modify it a little bit. That's the advantage of using
properties&mdash;we can reuse nearly the whole script. :-)</p>
<pre>
&lt;?xml version="1.0" encoding="UTF-8"?&gt;
&lt;project name="<b>FindTask</b>" basedir="." default="test"&gt;
...
&lt;target name="use.init" description="Taskdef's the <b>Find</b>-Task" depends="jar"&gt;
&lt;taskdef name="<b>find</b>" classname="<b>Find</b>" classpath="${ant.project.name}.jar"/&gt;
&lt;/target&gt;
<b>&lt;!-- the other use.* targets are deleted --&gt;</b>
...
&lt;/project&gt;</pre>
<p>The buildfile is in the
archive <a href="tutorial-tasks-filesets-properties.zip">tutorial-tasks-filesets-properties.zip [2]</a>
in <samp>/build.xml.01-propertyaccess</samp> (future version saved as *.02..., final version as <samp>build.xml</samp>;
same for sources).</p>
<h2 id="propertyaccess">Property access</h2>
<p>Our first step is to set a property to a value and print the value of that property. So
our scenario would be</p>
<pre>
&lt;find property="test" value="test-value"/&gt;
&lt;find print="test"/&gt;</pre>
<p>Ok, it can be rewritten with the core tasks</p>
<pre>
&lt;property name="test" value="test-value"/&gt;
&lt;echo message="${test}"/&gt;</pre>
<p>but I have to start on known ground :-)</p>
<p>So what to do? Handling three attributes (<var>property</var>, <var>value</var>, <var>print</var>) and an execute
method. Because this is only an introduction example I don't do much checking:</p>
<pre>
import org.apache.tools.ant.BuildException;
public class Find extends Task {
private String property;
private String value;
private String print;
public void setProperty(String property) {
this.property = property;
}
// setter for value and print
public void execute() {
if (print != null) {
String propValue = <b>getProject().getProperty(print)</b>;
log(propValue);
} else {
if (property == null) throw new BuildException("property not set");
if (value == null) throw new BuildException("value not set");
<b>getProject().setNewProperty(property, value)</b>;
}
}
}</pre>
<p>As said in the other tutorial, the property access is done via <code class="code">Project</code> instance. We get
this instance via the public <code class="code">getProject()</code> method which we inherit
from <code class="code">Task</code> (more precisely from <code class="code">ProjectComponent</code>). Reading a property
is done via <code class="code">getProperty(<i>propertyname</i>)</code> (very simple, isn't it?). This property returns
the value as <code>String</code> or <code>null</code> if not set.<br/> Setting a property is ... not really difficult,
but there is more than one setter. You can use the <code class="code">setProperty()</code> method which will do the job
as expected. But there is a golden rule in Ant: <em>properties are immutable</em>. And this method sets the property to
the specified value&mdash;whether it has a value before that or not. So we use another
way. <code class="code">setNewProperty()</code> sets the property only if there is no property with that name. Otherwise
a message is logged.</p>
<p><em>(By the way, a short explanation of Ant's "namespaces"&mdash;not to be confused with XML namespaces:
an <code>&lt;antcall&gt;</code> creates a new space for property names. All properties from the caller are passed to the
callee, but the callee can set its own properties without notice by the caller.)</em></p>
<p>There are some other setters, too (but I haven't used them, so I can't say something to them, sorry :-)</p>
<p>After putting our two line example from above into a target names <code>use.simple</code> we can call that from our
test case:</p>
<pre>
import org.junit.Assert;
import org.junit.Before;
import org.junit.Rule;
import org.junit.Test;
import org.apache.tools.ant.BuildFileRule;
public class FindTest {
@Rule
public final BuildFileRule buildRule = new BuildFileRule();
@Before
public void setUp() {
configureProject("build.xml");
}
@Test
public void testSimple() {
buildRule.executeTarget("useSimple");
<b>Assert.assertEquals("test-value", buildRule.getLog());</b>
}
}</pre>
<p>and all works fine.</p>
<h2 id="filesets">Using filesets</h2>
<p>Ant provides a common way of bundling files: the fileset. Because you are reading this tutorial I think you know them
and I don't have to spend more explanations about their usage in buildfiles. Our goal is to search for a file in
path. And in this step the path is simply a fileset (or more precise: a collection of filesets). So our usage would
be</p>
<pre>
&lt;find file="ant.jar" location="location.ant-jar"&gt;
&lt;fileset dir="${ant.home}" includes="**/*.jar"/&gt;
&lt;/find&gt;</pre>
<p>What do we need? A task with two attributes (<var>file</var>, <var>location</var>) and nested filesets. Because we
had attribute handling already explained in the example above and the handling of nested elements is described in the
other tutorial, the code should be very easy:</p>
<pre>
public class Find extends Task {
private String file;
private String location;
private List&lt;FileSet&gt; filesets = new ArrayList&lt;&gt;();
public void setFile(String file) {
this.file = file;
}
public void setLocation(String location) {
this.location = location;
}
public void addFileset(FileSet fileset) {
filesets.add(fileset);
}
public void execute() {
}
}</pre>
<p>Ok&mdash;that task wouldn't do very much, but we can use it in the described manner without failure. In the next step
we have to implement the execute method. And before that we will implement the appropriate test cases (TDD&mdash;test
driven development).</p>
<p>In the other tutorial we have reused the already written targets of our buildfile. Now we will configure most of the
test cases via Java code (sometimes it's much easier to write a target than doing it via Java coding). What can be
tested?</p>
<ul>
<li>invalid configuration of the task (missing file, missing location, missing fileset)</li>
<li>don't find a present file</li>
<li>behaviour if file can't be found</li>
</ul>
<p>Maybe you find some more test cases. But this is enough for now.<br/> For each of these points we create
a <code class="code">testXX</code> method.</p>
<pre>
public class FindTest {
@Rule
public final BuildFileRule buildRule = new BuildFileRule();
@Rule
public ExpectedException tried = ExpectedException.none();
... // constructor, setUp as above
@Test
public void testMissingFile() {
tried.expect(BuildException.class);
tried.expectMessage("file not set");
<b>Find find = new Find();</b>
<b>find.execute();</b>
}
@Test
public void testMissingLocation() {
tried.expect(BuildException.class);
tried.expectMessage("location not set");
Find find = new Find();
<b>find.setFile("ant.jar");</b>
find.execute();
}
@Test
public void testMissingFileset() {
tried.expect(BuildException.class);
tried.expectMessage("fileset not set");
Find find = new Find();
find.setFile("ant.jar");
find.setLocation("location.ant-jar");
}
@Test
public void testFileNotPresent() {
buildRule.executeTarget("testFileNotPresent");
String result = buildRule.getProject().getProperty("location.ant-jar");
assertNull("Property set to wrong value.", result);
}
@Test
public void testFilePresent() {
buildRule.executeTarget("testFilePresent");
String result = buildRule.getProject().getProperty("location.ant-jar");
assertNotNull("Property not set.", result);
assertTrue("Wrong file found.", result.endsWith("ant.jar"));
}
}</pre>
<p>If we run this test class all test cases (except <code class="code">testFileNotPresent</code>) fail. Now we can
implement our task, so that these test cases will pass.</p>
<pre>
protected void validate() {
if (file == null) throw new BuildException("file not set");
if (location == null) throw new BuildException("location not set");
if (filesets.size() &lt; 1) throw new BuildException("fileset not set");
}
public void execute() {
validate(); // 1
String foundLocation = null;
for (FileSet fs : filesets) { // 2
DirectoryScanner ds = fs.getDirectoryScanner(getProject()); // 3
for (String includedFile : ds.getIncludedFiles()) {
String filename = includedFile.replace('\\','/'); // 4
filename = filename.substring(filename.lastIndexOf("/") + 1);
if (foundLocation == null &amp;&amp; file.equals(filename)) {
File base = ds.getBasedir(); // 5
File found = new File(base, includedFile);
foundLocation = found.getAbsolutePath();
}
}
}
if (foundLocation != null) // 6
getProject().setNewProperty(location, foundLocation);
}</pre>
<p>On <strong>//1</strong> we check the prerequisites for our task. Doing that in a <code class="code">validate()</code>
method is a common way, because we separate the prerequisites from the real work. On <strong>//2</strong> we iterate
over all nested filesets. If we don't want to handle multiple filesets, the <code class="code">addFileset()</code>
method has to reject the further calls. We can get the result of a fileset via
its <code class="code">DirectoryScanner</code> like done in <strong>//3</strong>. After that we create a platform
independent String representation of the file path (<strong>//4</strong>, can be done in other ways of course). We have
to do the <code class="code">replace()</code>, because we work with a simple string comparison. Ant itself is platform
independent and can therefore run on filesystems with slash (<q>/</q>, e.g. Linux) or backslash (<q>\</q>, e.g. Windows)
as path separator. Therefore we have to unify that. If we find our file, we create an absolute path representation
on <strong>//5</strong>, so that we can use that information without knowing the <var>basedir</var>. (This is very
important on use with multiple filesets, because they can have different <var>basedir</var>s and the return value of the
directory scanner is relative to its <var>basedir</var>.) Finally we store the location of the file as property, if we
had found one (<strong>//6</strong>).</p>
<p>Ok, much more easier in this simple case would be to add the <var>file</var> as additional <code>include</code>
element to all filesets. But I wanted to show how to handle complex situations without being complex :-)</p>
<p>The test case uses the Ant property <code>ant.home</code> as reference. This property is set by
the <code class="code">Launcher</code> class which starts ant. We can use that property in our buildfiles as
a <a href="properties.html#built-in-props">build-in property [3]</a>. But if we create a new Ant environment we have to
set that value for our own. And we use the <code>&lt;junit&gt;</code> task in <var>fork</var> mode. Therefore we have
do modify our buildfile:</p>
<pre>
&lt;target name="junit" description="Runs the unit tests" depends="jar"&gt;
&lt;delete dir="${junit.out.dir.xml}"/&gt;
&lt;mkdir dir="${junit.out.dir.xml}"/&gt;
&lt;junit printsummary="yes" haltonfailure="no"&gt;
&lt;classpath refid="classpath.test"/&gt;
<b>&lt;sysproperty key="ant.home" value="${ant.home}"/&gt;</b>
&lt;formatter type="xml"/&gt;
&lt;batchtest fork="yes" todir="${junit.out.dir.xml}"&gt;
&lt;fileset dir="${src.dir}" includes="**/*Test.java"/&gt;
&lt;/batchtest&gt;
&lt;/junit&gt;
&lt;/target&gt;</pre>
<h2 id="path">Using nested paths</h2>
<p>A task providing support for filesets is a very comfortable one. But there is another possibility of bundling files:
the <code>&lt;path&gt;</code>. Filesets are easy if the files are all under a common base directory. But if this is not
the case, you have a problem. Another disadvantage is its speed: if you have only a few files in a huge directory
structure, why not use a <code>&lt;filelist&gt;</code> instead? <code>&lt;path&gt;</code>s combines these datatypes in
that way that a path contains other paths, filesets, dirsets and filelists. This is
why <a href="http://ant-contrib.sourceforge.net/" target="_top">Ant-Contrib [4]</a> <code>&lt;foreach&gt;</code> task is
modified to support paths instead of filesets. So we want that, too.</p>
<p>Changing from fileset to path support is very easy:</p>
<em><strong>Change Java code from:</strong></em>
<pre>
private List&lt;FileSet&gt; filesets = new ArrayList&lt;&gt;();
public void addFileset(FileSet fileset) {
filesets.add(fileset);
}</pre>
<em><strong>to:</strong></em>
<pre>
private List&lt;Path&gt; paths = new ArrayList&lt;&gt;(); *1
public void add<b>Path</b>(<b>Path</b> path) { *2
paths.add(path);
}</pre>
<em><strong>and build file from:</strong></em>
<pre>
&lt;find file="ant.jar" location="location.ant-jar"&gt;
&lt;fileset dir="${ant.home}" includes="**/*.jar"/&gt;
&lt;/find&gt;</pre>
<em><strong>to:</strong></em>
<pre>
&lt;find file="ant.jar" location="location.ant-jar"&gt;
<b>&lt;path&gt;</b> *3
&lt;fileset dir="${ant.home}" includes="**/*.jar"/&gt;
&lt;/path&gt;
&lt;/find&gt;</pre>
<p>On <strong>*1</strong> we rename only the list. It's just for better reading the source. On <strong>*2</strong> we
have to provide the right method: an <code>add<i>Name</i>(<i>Type</i> t)</code>. Therefore replace the fileset with path
here. Finally we have to modify our buildfile on <strong>*3</strong> because our task doesn't support nested filesets
any longer. So we wrap the fileset inside a path.</p>
<p>And now we modify the test case. Oh, not very much to do :-) Renaming
the <code class="code">testMissingFileset()</code> (not really a <em>must-be</em> but better it's named like the thing
it does) and update the <var>expected</var>-String in that method (now a <samp>path not set</samp> message is
expected). The more complex test cases base on the build script. So the targets <var>testFileNotPresent</var>
and <var>testFilePresent</var> have to be modified in the manner described above.</p>
<p>The test are finished. Now we have to adapt the task implementation. The easiest modification is in
the <code class="code">validate()</code> method where we change the last line to <code class="code">if
(paths.size()&lt;1) throw new BuildException("path not set");</code>. In the <code class="code">execute()</code> method
we have a little more work. ... mmmh ... in reality it's less work, because the <code class="code">Path</code> class
does the whole <code class="code">DirectoryScanner</code>-handling and creating-absolute-paths stuff for us. So the
execute method becomes just:</p>
<pre>
public void execute() {
validate();
String foundLocation = null;
for (Path path : paths) { // 1
for (String includedFile : <b>path.list()</b>) { // 2
String filename = includedFile.replace('\\','/');
filename = filename.substring(filename.lastIndexOf("/") + 1);
if (foundLocation == null &amp;&amp; file.equals(filename)) {
<b>foundLocation = includedFile;</b> // 3
}
}
}
if (foundLocation != null)
getProject().setNewProperty(location, foundLocation);
}
</pre>
<p>Of course we have to iterate through paths on <strong>//1</strong>. On <strong>//2</strong> and <strong>//3</strong>
we see that the Path class does the work for us: no DirectoryScanner (was at 2) and no creating of the absolute path
(was at 3).</p>
<h2 id="returning-list">Returning a list</h2>
<p>So far so good. But could a file be on more than one place in the path?&mdash;Of course.<br/>
And would it be good to get all of them?&mdash;It depends ...<p>
<p>In this section we will extend that task to support returning a list of all files. Lists as property values are not
supported by Ant natively. So we have to see how other tasks use lists. The most famous task using lists is
Ant-Contrib's <code>&lt;foreach&gt;</code>. All list elements are concatenated and separated with a customizable
separator (default <q>,</q>).</p>
<p>So we do the following:</p>
<pre>&lt;find ... <b>delimiter=""</b>/&gt; ... &lt;/find&gt;</pre>
<p>if the delimiter is set, we will return all found files as list with that delimiter.</p>
<p>Therefore we have to</p>
<ul>
<li>provide a new attribute</li>
<li>collect more than the first file</li>
<li>delete duplicates</li>
<li>create the list if necessary</li>
<li>return that list</li>
</ul>
<p>So we add as test case:</p>
<strong><em>in the buildfile:</em></strong>
<pre>
&lt;target name="test.init"&gt;
&lt;mkdir dir="test1/dir11/dir111"/&gt; *1
&lt;mkdir dir="test1/dir11/dir112"/&gt;
...
&lt;touch file="test1/dir11/dir111/test"/&gt;
&lt;touch file="test1/dir11/dir111/not"/&gt;
...
&lt;touch file="test1/dir13/dir131/not2"/&gt;
&lt;touch file="test1/dir13/dir132/test"/&gt;
&lt;touch file="test1/dir13/dir132/not"/&gt;
&lt;touch file="test1/dir13/dir132/not2"/&gt;
&lt;mkdir dir="test2"/&gt;
&lt;copy todir="test2"&gt; *2
&lt;fileset dir="test1"/&gt;
&lt;/copy&gt;
&lt;/target&gt;
&lt;target name="testMultipleFiles" depends="use.init,<b>test.init</b>"&gt; *3
&lt;find file="test" location="location.test" <b>delimiter=";"</b>&gt;
&lt;path&gt;
&lt;fileset dir="test1"/&gt;
&lt;fileset dir="test2"/&gt;
&lt;/path&gt;
&lt;/find&gt;
&lt;delete&gt; *4
&lt;fileset dir="test1"/&gt;
&lt;fileset dir="test2"/&gt;
&lt;/delete&gt;
&lt;/target&gt;</pre>
<strong><em>in the test class:</em></strong>
<pre>
public void testMultipleFiles() {
executeTarget("testMultipleFiles");
String result = getProject().getProperty("location.test");
assertNotNull("Property not set.", result);
assertTrue("Only one file found.", result.indexOf(";") &gt; -1);
}</pre>
<p>Now we need a directory structure where we CAN find files with the same name in different directories. Because we
can't sure to have one we create one on <strong>*1</strong> and <strong>*2</strong>. And of course we clean up that
on <strong>*4</strong>. The creation can be done inside our test target or in a separate one, which will be better for
reuse later (<strong>*3</strong>).
<p>The task implementation is modified as followed:</p>
<pre>
private List&lt;String&gt; foundFiles = new ArrayList&lt;&gt;();
...
private String delimiter = null;
...
public void setDelimiter(String delim) {
delimiter = delim;
}
...
public void execute() {
validate();
// find all files
for (Path path : paths) {
for (File includedFile : path.list()) {
String filename = includedFile.replace('\\','/');
filename = filename.substring(filename.lastIndexOf("/")+1);
if (file.equals(filename) &amp;&amp; <b>!foundFiles.contains(includedFile)</b>) { // 1
foundFiles.add(includedFile);
}
}
}
// create the return value (list/single)
String rv = null;
if (!foundFiles.isEmpty()) { // 2
if (delimiter == null) {
// only the first
rv = foundFiles.get(0);
} else {
// create list
StringBuilder list = new StringBuilder();
for (String file : foundFiles) { // 3
list.append(it.next());
if (<b>list.length() > 0</b>) list.append(delimiter); // 4
}
rv = list.toString();
}
}
// create the property
if (rv != null)
getProject().setNewProperty(location, rv);
}</pre>
<p>The algorithm does: finding all files, creating the return value depending on the users wish, returning the value as
property. On <strong>//1</strong> we eliminates the duplicates. <strong>//2</strong> ensures that we create the return
value only if we have found one file. On <strong>//3</strong> we iterate over all found files and <strong>//4</strong>
ensures that the last entry has no trailing delimiter.</p>
<p>Ok, first searching for all files and then returning only the first one ... You can tune the performance of your own
:-)</p>
<h2 id="documentation">Documentation</h2>
<p>A task is useless if the only who is able to code the buildfile is the task developer (and he only the next few weeks
:-). So documentation is also very important. In which form you do that depends on your favourite. But inside Ant there
is a common format and it has advantages if you use that: all task users know that form, this form is requested if you
decide to contribute your task. So we will doc our task in that form.</p>
<p>If you have a look at the manual page of the <a href="Tasks/java.html">Java task [5]</a> you will see that it:</p>
<ul>
<li>is plain html</li>
<li>starts with the name</li>
<li>has sections: description, parameters, nested elements, (maybe return codes) and (most important :-) examples</li>
<li>parameters are listed in a table with columns for attribute name, its description and whether it's required (if you
add a feature after an Ant release, provide a <em>since Ant xx</em> statement when it's introduced)</li>
<li>describe the nested elements (since-statement if necessary)</li>
<li>provide one or more useful examples; first code, then description.</li>
</ul>
<p>As a template we have:</p>
<pre>
&lt;!DOCTYPE html&gt;
&lt;html lang=&quot;en&quot;&gt;
&lt;head&gt;
&lt;title&gt;<b>Taskname</b> Task&lt;/title&gt;
&lt;/head&gt;
&lt;body&gt;
&lt;h2 id=&quot;<b>taskname</b>&quot;&gt;<b>Taskname</b>&lt;/h2&gt;
&lt;h3&gt;Description&lt;/h3&gt;
&lt;p&gt;<b>Describe the task.</b>&lt;/p&gt;
&lt;h3&gt;Parameters&lt;/h3&gt;
&lt;table class=&quot;attr&quot;&gt;
&lt;tr&gt;
&lt;th scope=&quot;col&quot;&gt;Attribute&lt;/th&gt;
&lt;th scope=&quot;col&quot;&gt;Description&lt;/th&gt;
&lt;th scope=&quot;col&quot;&gt;Required&lt;/th&gt;
&lt;/tr&gt;
<b>do this html row for each attribute (including inherited attributes)</b>
&lt;tr&gt;
&lt;td&gt;classname&lt;/td&gt;
&lt;td&gt;the Java class to execute.&lt;/td&gt;
&lt;td&gt;Either jar or classname&lt;/td&gt;
&lt;/tr&gt;
&lt;/table&gt;
&lt;h3&gt;Parameters specified as nested elements&lt;/h3&gt;
<b>Describe each nested element (including inherited)</b>
&lt;h4&gt;<b>your nested element</b>&lt;/h4&gt;
&lt;p&gt;<b>description</b>&lt;/p&gt;
&lt;p&gt;&lt;em&gt;since Ant 1.6&lt;/em&gt;.&lt;/p&gt;
&lt;h3&gt;Examples&lt;/h3&gt;
&lt;pre&gt;
<b>A code sample; don't forget to escape the &lt; of the tags with &amp;lt;</b>
&lt;/pre&gt;
<b>What should that example do?</b>
&lt;/body&gt;
&lt;/html&gt;</pre>
<p>Here is an example documentation page for our task:</p>
<pre>
&lt;!DOCTYPE html&gt;
&lt;html lang=&quot;en&quot;&gt;
&lt;head&gt;
&lt;title&gt;Find Task&lt;/title&gt;
&lt;/head&gt;
&lt;body&gt;
&lt;h2 id="find"&gt;Find&lt;/h2&gt;
&lt;h3&gt;Description&lt;/h3&gt;
&lt;p&gt;Searches in a given path for a file and returns the absolute to it as property.
If delimiter is set this task returns all found locations.&lt;/p&gt;
&lt;h3&gt;Parameters&lt;/h3&gt;
&lt;table class=&quot;attr&quot;&gt;
&lt;tr&gt;
&lt;th scope=&quot;col&quot;&gt;Attribute&lt;/th&gt;
&lt;th scope=&quot;col&quot;&gt;Description&lt;/th&gt;
&lt;th scope=&quot;col&quot;&gt;Required&lt;/th&gt;
&lt;/tr&gt;
&lt;tr&gt;
&lt;td&gt;file&lt;/td&gt;
&lt;td&gt;The name of the file to search.&lt;/td&gt;
&lt;td&gt;yes&lt;/td&gt;
&lt;/tr&gt;
&lt;tr&gt;
&lt;td&gt;location&lt;/td&gt;
&lt;td&gt;The name of the property where to store the location&lt;/td&gt;
&lt;td&gt;yes&lt;/td&gt;
&lt;/tr&gt;
&lt;tr&gt;
&lt;td&gt;delimiter&lt;/td&gt;
&lt;td&gt;A delimiter to use when returning the list&lt;/td&gt;
&lt;td&gt;only if the list is required&lt;/td&gt;
&lt;/tr&gt;
&lt;/table&gt;
&lt;h3&gt;Parameters specified as nested elements&lt;/h3&gt;
&lt;h4&gt;path&lt;/h4&gt;
&lt;p&gt;The path where to search the file.&lt;/p&gt;
&lt;h3&gt;Examples&lt;/h3&gt;
&lt;pre&gt;
&lt;find file="ant.jar" location="loc"&gt;
&lt;path&gt;
&lt;fileset dir="${ant.home}"/&gt;
&lt;path&gt;
&lt;/find&gt;&lt;/pre&gt;
Searches in Ant's home directory for a file &lt;samp&gt;ant.jar&lt;/samp&gt; and stores its location in
property &lt;code&gt;loc&lt;/code&gt; (should be &lt;samp&gt;ANT_HOME/bin/ant.jar&lt;/samp&gt;).
&lt;pre&gt;
&lt;find file="ant.jar" location="loc" delimiter=";"&gt;
&lt;path&gt;
&lt;fileset dir="C:/"/&gt;
&lt;path&gt;
&lt;/find&gt;
&lt;echo&gt;ant.jar found in: ${loc}&lt;/echo&gt;&lt;/pre&gt;
Searches in Windows C: drive for all &lt;samp&gt;ant.jar&lt;/samp&gt; and stores their locations in
property &lt;code&gt;loc&lt;/code&gt; delimited with &lt;q&gt;;&lt;/q&gt;. (should need a long time :-)
After that it prints out the result (e.g. &lt;samp&gt;C:/ant-1.5.4/bin/ant.jar;C:/ant-1.6/bin/ant.jar&lt;/samp&gt;).
&lt;/body&gt;
&lt;/html&gt;</pre>
<h2 id="contribute">Contribute the new task</h2>
<p>If we decide to contribute our task, we should do some things:</p>
<ul>
<li>is our task welcome? :-) Simply ask on the user list</li>
<li>is the right package used?</li>
<li>does the code conform to the styleguide?</li>
<li>do all tests pass?</li>
<li>does the code compile on the minimal and current JDK for the Ant distribution (and passes all tests there)?</li>
<li>code under Apache license</li>
<li>create a patch file</li>
<li>publishing that patch file</li>
</ul>
<p>The <a href="https://ant.apache.org/ant_task_guidelines.html" target="_top">Ant Task Guidelines [6]</a> support
additional information on that.</p>
<p>Now we will check the "Checklist before submitting a new task" described in that guideline.</p>
<ul>
<li>Java file begins with Apache license statement. <strong><em>must do that</em></strong></li>
<li>Task does not depend on GPL or LGPL code. <strong><em>ok</em></strong></li>
<li>Source code complies with style guidelines <strong><em>have to check (checkstyle)</em></strong></li>
<li>Code compiles and runs on minimal support java version <strong><em>have to try</em></strong></li>
<li>Member variables are private, and provide public accessor methods if access is actually needed. <strong><em>have to
check (checkstyle)</em></strong></li>
<li><em>Maybe</em> Task has <var>failonerror</var> attribute to control failure
behaviour <strong><em>hasn't</em></strong></li>
<li>New test cases written and succeed <strong><em>passed on newest jdk version, have to try on oldest supported jdk version</em></strong></li>
<li>Documentation page written <strong><em>ok</em></strong></li>
<li>Example task declarations in the documentation tested. <strong><em>ok (used in tests)</em></strong></li>
<li>Message to dev contains [SUBMIT] and task name in subject <strong><em>to do</em></strong></li>
<li>Message body contains a rationale for the task <strong><em>to do</em></strong></li>
<li>Message body contains the URL to GitHub pull request. <strong><em>to do</em></strong></li>
</ul>
<h3>Package / Directories</h3>
<p>This task does not depend on any external library. Therefore we can use this as a core task. This task contains only
one class. So we can use the standard package for core
tasks: <code class="code">org.apache.tools.ant.taskdefs</code>. Implementations are in the
directory <samp>src/main</samp>, tests in <samp>src/testcases</samp> and buildfiles for tests
in <samp>src/etc/testcases</samp>.</p>
<p>Now we integrate our work into Ant distribution. So first we do an update of our Git tree. If not done yet, you
should clone the Ant repository on GitHub[7], then create a local clone:</p>
<pre class="input">git clone https://github.com/<em>your-sig</em>/ant.git</pre>
<p>Now we will build our Ant distribution and do a test. So we can see if there are any tests failing on our
machine. (We can ignore these failing tests on later steps; Windows syntax used here&mdash;translate to UNIX if
needed):</p>
<pre class="input">
ANTREPO&gt; build // 1
ANTREPO&gt; set ANT_HOME=%CD%\dist // 2
ANTREPO&gt; ant test -Dtest.haltonfailure=false // 3</pre>
<p>First we have to build our Ant distribution (<strong>//1</strong>). On <strong>//2</strong> we set
the <code>ANT_HOME</code> environment variable to the directory where the new created distribution is stored
(<code>%CD%</code> is expanded to the current directory on Windows 2000 and later). On <strong>//3</strong> we let Ant
do all the tests (which enforced a compile of all tests) without stopping on first failure.</p>
<p>Next we apply our work onto Ant sources. Because we haven't modified any, this is a relatively simple
step. <em>(Because I have a local Git clone of Ant and usually contribute my work, I work on the local copy just from
the beginning. The advantage: this step isn't necessary and saves a lot of work if you modify existing sources :-)</em>.
<ul>
<li>move the <samp>Find.java</samp> to <samp>ANTREPO/src/main/org/apache/tools/ant/taskdefs/Find.java</samp></li>
<li>move the <samp>FindTest.java</samp> to <samp>ANTREPO/src/testcases/org/apache/tools/ant/taskdefs/FindTest.java</samp></li>
<li>move the <samp>build.xml</samp> to <samp>ANTREPO/src/etc/testcases/taskdefs/<strong>find.xml</strong></samp> (!!! renamed !!!)</li>
<li>add a <code>package org.apache.tools.ant.taskdefs;</code> at the beginning of the two java files</li>
<li>delete all stuff from <samp>find.xml</samp> keeping the
targets <q>testFileNotPresent</q>, <q>testFilePresent</q>, <q>test.init</q> and <q>testMultipleFiles</q></li>
<li>delete the dependency to <q>use.init</q> in the <samp>find.xml</samp></li>
<li>in <samp>FindTest.java</samp> change the line <code>configureProject("build.xml");</code>
to <code>configureProject("src/etc/testcases/taskdefs/find.xml");</code></li>
<li>move the <samp>find.html</samp> to <samp>ANTREPO/docs/manual/Tasks/find.html</samp></li>
<li>add a <code>&lt;a href="Tasks/find.html"&gt;Find&lt;/a&gt;&lt;br&gt;</code> in
the <samp>ANTREPO/docs/manual/tasklist.html</samp></li>
</ul>
<p>Now our modifications are done and we will retest it:</p>
<pre class="input">
ANTREPO&gt; build
ANTREPO&gt; ant run-single-test // 1
-Dtestcase=org.apache.tools.ant.taskdefs.FindTest // 2
-Dtest.haltonfailure=false</pre>
<p>Because we only want to test our new class, we use the target for single tests, specify the test to use and configure
not to halt on the first failure&mdash;we want to see all failures of our own test (<strong>//1 + 2</strong>).</p>
<p>And ... oh, all tests fail: <em>Ant could not find the task or a class this task relies upon.</em></p>
<p>Ok: in the earlier steps we told Ant to use the Find class for the <code>&lt;find&gt;</code> task (remember
the <code>&lt;taskdef&gt;</code> statement in the <q>use.init</q> target). But now we want to introduce that task as a
core task. And nobody wants to <code>taskdef</code> the <code>javac</code>, <code>echo</code>, ... So what to do? The
answer is the <samp>src/main/.../taskdefs/default.properties</samp>. Here is the mapping between taskname and
implementing class done. So we add a <code>find=org.apache.tools.ant.taskdefs.Find</code> as the last core task (just
before the <code># optional tasks</code> line). Now a second try:</p>
<pre class="input">
ANTREPO&gt; build // 1
ANTREPO&gt; ant run-single-test
-Dtestcase=org.apache.tools.ant.taskdefs.FindTest
-Dtest.haltonfailure=false</pre>
<p>We have to rebuild (<strong>//1</strong>) Ant because the test look in the <samp>%ANT_HOME%\lib\ant.jar</samp> (more
precise: on the classpath) for the properties file. And we have only modified it in the source path. So we have to
rebuild that jar. But now all tests pass and we check whether our class breaks some other tests.</p>
<pre class="input">ANTREPO&gt; ant test -Dtest.haltonfailure=false</pre>
<p>Because there are a lot of tests this step requires a little bit of time. So use the <q>run-single-test</q> during
development and do the <q>test</q> only at the end (maybe sometimes during development too). We use
the <kbd>-Dtest.haltonfailure=false</kbd> here because there could be other tests fail and we have to look into
them.</p>
<p>This test run should show us two things: our test will run and the number of failing tests is the same as directly
after <code>git clone</code> (without our modifications).</p>
<h3>Apache license statement</h3>
<p>Simply copy the license text from one the other source from the Ant source tree.</p>
<h3>Test on the minimal JDK version</h3>
<p>Ant 1.10 uses Java 8 for development, but Ant 1.9 is actively maintained, too. That means that updates to Ant code
present in Ant 1.9 must be able to run on a JDK 5. (It is fine to address only ant 1.10 and above for new teasks.)
So we have to test that. You can download older JDKs
from <a href="https://www.oracle.com/technetwork/java/archive-139210.html" target="_top">Oracle [8]</a>.</p>
<p>Clean the <code>ANT_HOME</code> variable, delete the <samp>build</samp>, <samp>bootstrap</samp> and <samp>dist</samp>
directories, and point <code>JAVA_HOME</code> to the JDK 5 home directory. Then create the patch with your commit,
checkout 1.9.x branch in Git, apply your patch and do the <code>build</code>, set <code>ANT_HOME</code> and
run <kbd>ant test</kbd> (like above).</p>
<p>Our test should pass.</p>
<h3>Checkstyle</h3>
<p>There are many things we have to ensure. Indentation with 4 spaces, blanks here and there, ... (all described in
the <a href="https://ant.apache.org/ant_task_guidelines.html" target="_top">Ant Task Guidelines [6]</a> which includes
the <a href="https://www.oracle.com/technetwork/java/codeconvtoc-136057.html" target="_top">Sun code style
[9]</a>). Because there are so many things we would be happy to have a tool for do the checks. There is one:
checkstyle. Checkstyle is available at <a href="https://checkstyle.org/" target="_top">Sourceforge [10]</a>
and Ant provides with the <samp>check.xml</samp> a buildfile which will do the job for us.</p>
<p>Download it and put the <samp>checkstyle-*-all.jar</samp> into your <samp>%USERPROFILE%\.ant\lib</samp> directory.
All jar's stored there are available to Ant so you haven't to add it to you <samp>%ANT_HOME%\lib</samp> directory (this
feature is available <em>since Ant 1.6</em>).</p>
<p>So we will run the tests with</p>
<pre class="input">ANTREPO&gt; ant -f check.xml checkstyle htmlreport</pre>
<p>I prefer the HTML report because there are lots of messages and we can navigate faster. Open
the <samp>ANTREPO/build/reports/checkstyle/html/index.html</samp> and navigate to the <samp>Find.java</samp>. Now we see
that there are some errors: missing whitespaces, unused imports, missing javadocs. So we have to do that.</p>
<p>Hint: start at the <strong>bottom</strong> of the file so the line numbers in the report will keep up to date and you
will find the next error place much more easier without redoing the checkstyle.</p>
<p>After cleaning up the code according to the messages we delete the reports directory and do a second checkstyle
run. Now our task isn't listed. That's fine :-)</p>
<h3>Publish the task</h3>
<p>Finally we publish that archive. As described in the <a href="https://ant.apache.org/ant_task_guidelines.html"
target="_top">Ant Task Guidelines [7]</a> we can announce it on the developer mailing list, create a BugZilla entry and
open a GitHub pull request. For both we need some information:</p>
<table>
<tr>
<th scope="row">subject</th>
<td><em>short description</em></td>
<td>Task for finding files in a path</td>
</tr>
<tr>
<th scope="row">body</th>
<td><em>more details about the path</em></td>
<td>This new task looks inside a nested <code>&lt;path/&gt;</code> for occurrences of a file and stores all locations
as a property. See the included manual for details.</td>
</tr>
<tr>
<th scope="row">pull request reference</th>
<td><em>GitHub pull request URL</em></td>
<td>https://github.com/apache/ant/pull/0</td>
</tr>
</table>
<p>Sending an email with this information is very easy and I think I haven't to describe that. BugZilla is slightly
more difficult. But the advantage is that entries will not be forgotten (a report is generated once every weekend). So
I will describe the process.</p>
<p>First, you must have a BugZilla account. So open the <a href="https://issues.apache.org/bugzilla/"
target="_top">BugZilla Main Page [11]</a> and follow the
link <a href="https://issues.apache.org/bugzilla/createaccount.cgi" target="_top">Open a new Bugzilla account [12]</a>
and the steps described there if you haven't one.</p>
<ol>
<li>From the BugZilla main page choose <a href="https://issues.apache.org/bugzilla/enter_bug.cgi" target="_top">Enter a
new bug report [13]</a></li>
<li>Choose "Ant" as product</li>
<li>Version is the last "Alpha (nightly)" (at this time 1.10)</li>
<li>Component is "Core tasks"</li>
<li>Platform and Severity are ok with "Other" and "Normal"</li>
<li>Initial State is ok with "New"</li>
<li>Same with the empty "Assigned to"</li>
<li>It is not required to add yourself as CC, because you are the reporter and therefore will be informed on
changes</li>
<li>URL: GitHub pull request URL</li>
<li>Summary: add the <var>subject</var> from the table</li>
<li>Description: add the <var>body</var> from the table</li>
<li>Then press "Commit"</li>
</ol>
<p>Now the new task is registered in the bug database.</p>
<h2 id="resources">Resources</h2>
<ol class="refs">
<li><a href="tutorial-writing-tasks.html">tutorial-writing-tasks.html</a></li>
<li><a href="tutorial-tasks-filesets-properties.zip">tutorial-tasks-filesets-properties.zip</a></li>
<li><a href="properties.html#built-in-props">properties.html#built-in-props</a></li>
<li><a href="http://ant-contrib.sourceforge.net/" target="_top">http://ant-contrib.sourceforge.net/</a></li>
<li><a href="Tasks/java.html">Tasks/java.html</a></li>
<li><a href="https://ant.apache.org/ant_task_guidelines.html"
target="_top">https://ant.apache.org/ant_task_guidelines.html</a></li>
<li><a href="https://github.com/apache/ant" target="_top">https://github.com/apache/ant</a></li>
<li><a href="https://www.oracle.com/technetwork/java/archive-139210.html"
target="_top">https://www.oracle.com/technetwork/java/archive-139210.html</a></li>
<li><a href="https://www.oracle.com/technetwork/java/codeconvtoc-136057.html"
target="_top">https://www.oracle.com/technetwork/java/codeconvtoc-136057.html</a></li>
<li><a href="https://checkstyle.org/" target="_top">https://checkstyle.org/</a></li>
<li><a href="https://issues.apache.org/bugzilla/" target="_top">https://issues.apache.org/bugzilla/</a></li>
<li><a href="https://issues.apache.org/bugzilla/createaccount.cgi"
target="_top">https://issues.apache.org/bugzilla/createaccount.cgi</a></li>
<li><a href="https://issues.apache.org/bugzilla/enter_bug.cgi"
target="_top">https://issues.apache.org/bugzilla/enter_bug.cgi</a></li>
</ol>
</body>
</html>