 .. Licensed to the Apache Software Foundation (ASF) under one
    or more contributor license agreements.  See the NOTICE file
    distributed with this work for additional information
    regarding copyright ownership.  The ASF licenses this file
    to you under the Apache License, Version 2.0 (the
    "License"); you may not use this file except in compliance
    with the License.  You may obtain a copy of the License at

 ..   http://www.apache.org/licenses/LICENSE-2.0

 .. Unless required by applicable law or agreed to in writing,
    software distributed under the License is distributed on an
    "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
    KIND, either express or implied.  See the License for the
    specific language governing permissions and limitations
    under the License.

DAG Runs
=========
A DAG Run is an object representing an instantiation of the DAG in time.

Each DAG may or may not have a schedule, which informs how DAG Runs are
created. ``schedule_interval`` is defined as a DAG argument, which can be passed a
`cron expression <https://en.wikipedia.org/wiki/Cron#CRON_expression>`_ as
a ``str``, a ``datetime.timedelta`` object, or one of of the following cron "presets".

.. tip::
    You can use an online editor for CRON expressions such as `Crontab guru <https://crontab.guru/>`_

Cron Presets
''''''''''''

+----------------+----------------------------------------------------------------+-----------------+
| preset         | meaning                                                        | cron            |
+================+================================================================+=================+
| ``None``       | Don't schedule, use for exclusively "externally triggered"     |                 |
|                | DAGs                                                           |                 |
+----------------+----------------------------------------------------------------+-----------------+
| ``@once``      | Schedule once and only once                                    |                 |
+----------------+----------------------------------------------------------------+-----------------+
| ``@hourly``    | Run once an hour at the beginning of the hour                  | ``0 * * * *``   |
+----------------+----------------------------------------------------------------+-----------------+
| ``@daily``     | Run once a day at midnight                                     | ``0 0 * * *``   |
+----------------+----------------------------------------------------------------+-----------------+
| ``@weekly``    | Run once a week at midnight on Sunday morning                  | ``0 0 * * 0``   |
+----------------+----------------------------------------------------------------+-----------------+
| ``@monthly``   | Run once a month at midnight of the first day of the month     | ``0 0 1 * *``   |
+----------------+----------------------------------------------------------------+-----------------+
| ``@quarterly`` | Run once a quarter at midnight on the first day                | ``0 0 1 */3 *`` |
+----------------+----------------------------------------------------------------+-----------------+
| ``@yearly``    | Run once a year at midnight of January 1                       | ``0 0 1 1 *``   |
+----------------+----------------------------------------------------------------+-----------------+

Your DAG will be instantiated for each schedule along with a corresponding
DAG Run entry in the database backend.

.. note::

    If you run a DAG on a schedule_interval of one day, the run stamped 2020-01-01
    will be triggered soon after 2020-01-01T23:59. In other words, the job instance is
    started once the period it covers has ended.  The ``execution_date`` available in the context
    will also be 2020-01-01.

    The first DAG Run is created based on the minimum ``start_date`` for the tasks in your DAG.
    Subsequent DAG Runs are created by the scheduler process, based on your DAG’s ``schedule_interval``,
    sequentially. If your start_date is 2020-01-01 and schedule_interval is @daily, the first run
    will be created on 2020-01-02 i.e., after your start date has passed.

Re-run DAG
''''''''''
There can be cases where you will want to execute your DAG again. One such case is when the scheduled
DAG run fails.

.. _dag-catchup:

Catchup
-------

An Airflow DAG with a ``start_date``, possibly an ``end_date``, and a ``schedule_interval`` defines a
series of intervals which the scheduler turns into individual DAG Runs and executes. The scheduler, by default, will
kick off a DAG Run for any interval that has not been run since the last execution date (or has been cleared). This concept is called Catchup.

If your DAG is written to handle its catchup (i.e., not limited to the interval, but instead to ``Now`` for instance.),
then you will want to turn catchup off. This can be done by setting ``catchup = False`` in DAG  or ``catchup_by_default = False``
in the configuration file. When turned off, the scheduler creates a DAG run only for the latest interval.

.. code-block:: python

    """
    Code that goes along with the Airflow tutorial located at:
    https://github.com/apache/airflow/blob/master/airflow/example_dags/tutorial.py
    """
    from airflow.models.dag import DAG
    from airflow.operators.bash import BashOperator
    from datetime import datetime, timedelta


    default_args = {
        'owner': 'airflow',
        'depends_on_past': False,
        'email': ['airflow@example.com'],
        'email_on_failure': False,
        'email_on_retry': False,
        'retries': 1,
        'retry_delay': timedelta(minutes=5)
    }

    dag = DAG(
        'tutorial',
        default_args=default_args,
        start_date=datetime(2015, 12, 1),
        description='A simple tutorial DAG',
        schedule_interval='@daily',
        catchup=False)

In the example above, if the DAG is picked up by the scheduler daemon on 2016-01-02 at 6 AM,
(or from the command line), a single DAG Run will be created, with an `execution_date` of 2016-01-01,
and the next one will be created just after midnight on the morning of 2016-01-03 with an execution date of 2016-01-02.

If the ``dag.catchup`` value had been ``True`` instead, the scheduler would have created a DAG Run
for each completed interval between 2015-12-01 and 2016-01-02 (but not yet one for 2016-01-02,
as that interval hasn’t completed) and the scheduler will execute them sequentially.

Catchup is also triggered when you turn off a DAG for a specified period and then re-enable it.

This behavior is great for atomic datasets that can easily be split into periods. Turning catchup off is great
if your DAG performs catchup internally.


Backfill
---------
There can be the case when you may want to run the dag for a specified historical period e.g.,
A data filling DAG is created with ``start_date`` **2019-11-21**, but another user requires the output data from a month ago i.e., **2019-10-21**.
This process is known as Backfill.

You may want to backfill the data even in the cases when catchup is disabled. This can be done through CLI.
Run the below command

.. code-block:: bash

    airflow dags backfill \
        --start-date START_DATE \
        --end-date END_DATE \
        dag_id

The `backfill command <cli-and-env-variables-ref.html#backfill>`_ will re-run all the instances of the dag_id for all the intervals within the start date and end date.

Re-run Tasks
------------
Some of the tasks can fail during the scheduled run. Once you have fixed
the errors after going through the logs, you can re-run the tasks by clearing them for the
scheduled date. Clearing a task instance doesn't delete the task instance record.
Instead, it updates ``max_tries`` to ``0`` and sets the current task instance state to ``None``, which causes the task to re-run.

Click on the failed task in the Tree or Graph views and then click on **Clear**.
The executor will re-run it.

There are multiple options you can select to re-run -

* **Past** - All the instances of the task in the  runs before the current DAG's execution date
* **Future** -  All the instances of the task in the  runs after the current DAG's execution date
* **Upstream** - The upstream tasks in the current DAG
* **Downstream** - The downstream tasks in the current DAG
* **Recursive** - All the tasks in the child DAGs and parent DAGs
* **Failed** - Only the failed tasks in the current DAG

You can also clear the task through CLI using the command:

.. code-block:: bash

    airflow tasks clear dag_id \
        --task-regex task_regex \
        --start-date START_DATE \
        --end-date END_DATE

For the specified ``dag_id`` and time interval, the command clears all instances of the tasks matching the regex.
For more options, you can check the help of the `clear command <cli-ref.html#clear>`_ :

.. code-block:: bash

    airflow tasks clear --help

External Triggers
'''''''''''''''''

Note that DAG Runs can also be created manually through the CLI. Just run the command -

.. code-block:: bash

    airflow dags trigger --exec-date execution_date run_id

The DAG Runs created externally to the scheduler get associated with the trigger’s timestamp and are displayed
in the UI alongside scheduled DAG runs. The execution date passed inside the DAG can be specified using the ``-e`` argument.
The default is the current date in the UTC timezone.

In addition, you can also manually trigger a DAG Run using the web UI (tab **DAGs** -> column **Links** -> button **Trigger Dag**)

.. _dagrun:parameters:

Passing Parameters when triggering dags
------------------------------------------

When triggering a DAG from the CLI, the REST API or the UI, it is possible to pass configuration for a DAG Run as
a JSON blob.

Example of a parameterized DAG:

.. code-block:: python

    from airflow import DAG
    from airflow.operators.bash_operator import BashOperator
    from airflow.utils.dates import days_ago

    dag = DAG("example_parametrized_dag", schedule_interval=None, start_date=days_ago(2))

    parameterized_task = BashOperator(
        task_id='parameterized_task',
        bash_command="echo value: {{ dag_run.conf['conf1'] }}",
        dag=dag,
    )


**Note**: The parameters from ``dag_run.conf`` can only be used in a template field of an operator.

Using CLI
^^^^^^^^^^^

.. code-block:: bash

    airflow dags trigger --conf '{"conf1": "value1"}' example_parametrized_dag

Using UI
^^^^^^^^^^

.. image:: img/example_passing_conf.png

To Keep in Mind
''''''''''''''''
* Marking task instances as failed can be done through the UI. This can be used to stop running task instances.
* Marking task instances as successful can be done through the UI. This is mostly to fix false negatives, or
  for instance, when the fix has been applied outside of Airflow.