..  Licensed to the Apache Software Foundation (ASF) under one
    or more contributor license agreements.  See the NOTICE file
    distributed with this work for additional information
    regarding copyright ownership.  The ASF licenses this file
    to you under the Apache License, Version 2.0 (the
    "License"); you may not use this file except in compliance
    with the License.  You may obtain a copy of the License at

..    http://www.apache.org/licenses/LICENSE-2.0

..  Unless required by applicable law or agreed to in writing,
    software distributed under the License is distributed on an
    "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
    KIND, either express or implied.  See the License for the
    specific language governing permissions and limitations
    under the License.

FAQ
========

Why isn't my task getting scheduled?
------------------------------------

There are very many reasons why your task might not be getting scheduled.
Here are some of the common causes:

- Does your script "compile", can the Airflow engine parse it and find your
  DAG object. To test this, you can run ``airflow list_dags`` and
  confirm that your DAG shows up in the list. You can also run
  ``airflow list_tasks foo_dag_id --tree`` and confirm that your task
  shows up in the list as expected. If you use the CeleryExecutor, you
  may want to confirm that this works both where the scheduler runs as well
  as where the worker runs.

- Does the file containing your DAG contain the string "airflow" and "DAG" somewhere
  in the contents? When searching the DAG directory, Airflow ignores files not containing
  "airflow" and "DAG" in order to prevent the DagBag parsing from importing all python
  files collocated with user's DAGs.

- Is your ``start_date`` set properly? The Airflow scheduler triggers the
  task soon after the ``start_date + scheduler_interval`` is passed.

- Is your ``schedule_interval`` set properly? The default ``schedule_interval``
  is one day (``datetime.timedelta(1)``). You must specify a different ``schedule_interval``
  directly to the DAG object you instantiate, not as a ``default_param``, as task instances
  do not override their parent DAG's ``schedule_interval``.

- Is your ``start_date`` beyond where you can see it in the UI? If you
  set your ``start_date`` to some time say 3 months ago, you won't be able to see
  it in the main view in the UI, but you should be able to see it in the
  ``Menu -> Browse ->Task Instances``.

- Are the dependencies for the task met. The task instances directly
  upstream from the task need to be in a ``success`` state. Also,
  if you have set ``depends_on_past=True``, the previous task instance
  needs to have succeeded (except if it is the first run for that task).
  Also, if ``wait_for_downstream=True``, make sure you understand
  what it means.
  You can view how these properties are set from the ``Task Instance Details``
  page for your task.

- Are the DagRuns you need created and active? A DagRun represents a specific
  execution of an entire DAG and has a state (running, success, failed, ...).
  The scheduler creates new DagRun as it moves forward, but never goes back
  in time to create new ones. The scheduler only evaluates ``running`` DagRuns
  to see what task instances it can trigger. Note that clearing tasks
  instances (from the UI or CLI) does set the state of a DagRun back to
  running. You can bulk view the list of DagRuns and alter states by clicking
  on the schedule tag for a DAG.

- Is the ``concurrency`` parameter of your DAG reached? ``concurrency`` defines
  how many ``running`` task instances a DAG is allowed to have, beyond which
  point things get queued.

- Is the ``max_active_runs`` parameter of your DAG reached? ``max_active_runs`` defines
  how many ``running`` concurrent instances of a DAG there are allowed to be.

You may also want to read the Scheduler section of the docs and make
sure you fully understand how it proceeds.


How do I trigger tasks based on another task's failure?
-------------------------------------------------------

Check out the ``Trigger Rule`` section in the Concepts section of the
documentation

Why are connection passwords still not encrypted in the metadata db after I installed airflow[crypto]?
------------------------------------------------------------------------------------------------------

Check out the ``Connections`` section in the Configuration section of the
documentation

What's the deal with ``start_date``?
------------------------------------

``start_date`` is partly legacy from the pre-DagRun era, but it is still
relevant in many ways. When creating a new DAG, you probably want to set
a global ``start_date`` for your tasks using ``default_args``. The first
DagRun to be created will be based on the ``min(start_date)`` for all your
task. From that point on, the scheduler creates new DagRuns based on
your ``schedule_interval`` and the corresponding task instances run as your
dependencies are met. When introducing new tasks to your DAG, you need to
pay special attention to ``start_date``, and may want to reactivate
inactive DagRuns to get the new task onboarded properly.

We recommend against using dynamic values as ``start_date``, especially
``datetime.now()`` as it can be quite confusing. The task is triggered
once the period closes, and in theory an ``@hourly`` DAG would never get to
an hour after now as ``now()`` moves along.


Previously we also recommended using rounded ``start_date`` in relation to your
``schedule_interval``. This meant an ``@hourly`` would be at ``00:00``
minutes:seconds, a ``@daily`` job at midnight, a ``@monthly`` job on the
first of the month. This is no longer required. Airflow will now auto align
the ``start_date`` and the ``schedule_interval``, by using the ``start_date``
as the moment to start looking.

You can use any sensor or a ``TimeDeltaSensor`` to delay
the execution of tasks within the schedule interval.
While ``schedule_interval`` does allow specifying a ``datetime.timedelta``
object, we recommend using the macros or cron expressions instead, as
it enforces this idea of rounded schedules.

When using ``depends_on_past=True`` it's important to pay special attention
to ``start_date`` as the past dependency is not enforced only on the specific
schedule of the ``start_date`` specified for the task. It's also
important to watch DagRun activity status in time when introducing
new ``depends_on_past=True``, unless you are planning on running a backfill
for the new task(s).

Also important to note is that the tasks ``start_date``, in the context of a
backfill CLI command, get overridden by the backfill's command ``start_date``.
This allows for a backfill on tasks that have ``depends_on_past=True`` to
actually start, if that wasn't the case, the backfill just wouldn't start.

How can I create DAGs dynamically?
----------------------------------

Airflow looks in your ``DAGS_FOLDER`` for modules that contain ``DAG`` objects
in their global namespace, and adds the objects it finds in the
``DagBag``. Knowing this all we need is a way to dynamically assign
variable in the global namespace, which is easily done in python using the
``globals()`` function for the standard library which behaves like a
simple dictionary.

.. code:: python

    def create_dag(dag_id):
        """
        A function returning a DAG object.
        """

        return DAG(dag_id)


    for i in range(10):
        dag_id = f'foo_{i}'
        globals()[dag_id] = DAG(dag_id)

        # or better, call a function that returns a DAG object!
        other_dag_id = f'bar_{i}'
        globals()[other_dag_id] = create_dag(other_dag_id)

What are all the ``airflow run`` commands in my process list?
---------------------------------------------------------------

There are many layers of ``airflow run`` commands, meaning it can call itself.

- Basic ``airflow run``: fires up an executor, and tell it to run an
  ``airflow run --local`` command. if using Celery, this means it puts a
  command in the queue for it to run remote, on the worker. If using
  LocalExecutor, that translates into running it in a subprocess pool.
- Local ``airflow run --local``: starts an ``airflow run --raw``
  command (described below) as a subprocess and is in charge of
  emitting heartbeats, listening for external kill signals
  and ensures some cleanup takes place if the subprocess fails
- Raw ``airflow run --raw`` runs the actual operator's execute method and
  performs the actual work


How can my airflow dag run faster?
----------------------------------

There are three variables we could control to improve airflow dag performance:

- ``parallelism``: This variable controls the number of task instances that the airflow worker can run simultaneously. User could increase the parallelism variable in the ``airflow.cfg``.
- ``concurrency``: The Airflow scheduler will run no more than ``$concurrency`` task instances for your DAG at any given time. Concurrency is defined in your Airflow DAG. If you do not set the concurrency on your DAG, the scheduler will use the default value from the ``dag_concurrency`` entry in your ``airflow.cfg``.
- ``max_active_runs``: the Airflow scheduler will run no more than ``max_active_runs`` DagRuns of your DAG at a given time. If you do not set the ``max_active_runs`` in your DAG, the scheduler will use the default value from the ``max_active_runs_per_dag`` entry in your ``airflow.cfg``.


How can we reduce the airflow UI page load time?
------------------------------------------------

If your dag takes long time to load, you could reduce the value of ``default_dag_run_display_number`` configuration in ``airflow.cfg`` to a smaller value. This configurable controls the number of dag run to show in UI with default value 25.


How to fix Exception: Global variable explicit_defaults_for_timestamp needs to be on (1)?
-----------------------------------------------------------------------------------------

This means ``explicit_defaults_for_timestamp`` is disabled in your mysql server and you need to enable it by:

#. Set ``explicit_defaults_for_timestamp = 1`` under the mysqld section in your my.cnf file.
#. Restart the Mysql server.


How to reduce airflow dag scheduling latency in production?
-----------------------------------------------------------

- ``max_threads``: Scheduler will spawn multiple threads in parallel to schedule dags. This is controlled by ``max_threads`` with default value of 2. User should increase this value to a larger value(e.g numbers of cpus where scheduler runs - 1) in production.
- ``scheduler_heartbeat_sec``: User should consider to increase ``scheduler_heartbeat_sec`` config to a higher value(e.g 60 secs) which controls how frequent the airflow scheduler gets the heartbeat and updates the job's entry in database.