// Licensed to the Apache Software Foundation (ASF) under one
// or more contributor license agreements.  See the NOTICE file
// distributed with this work for additional information
// regarding copyright ownership.  The ASF licenses this file
// to you under the Apache License, Version 2.0 (the
// "License"); you may not use this file except in compliance
// with the License.  You may obtain a copy of the License at
//
//   http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing,
// software distributed under the License is distributed on an
// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
// KIND, either express or implied.  See the License for the
// specific language governing permissions and limitations
// under the License.

/*
Airflow API (Stable)

# Overview  To facilitate management, Apache Airflow supports a range of REST API endpoints across its objects. This section provides an overview of the API design, methods, and supported use cases.  Most of the endpoints accept `JSON` as input and return `JSON` responses. This means that you must usually add the following headers to your request: ``` Content-type: application/json Accept: application/json ```  ## Resources  The term `resource` refers to a single type of object in the Airflow metadata. An API is broken up by its endpoint's corresponding resource. The name of a resource is typically plural and expressed in camelCase. Example: `dagRuns`.  Resource names are used as part of endpoint URLs, as well as in API parameters and responses.  ## CRUD Operations  The platform supports **C**reate, **R**ead, **U**pdate, and **D**elete operations on most resources. You can review the standards for these operations and their standard parameters below.  Some endpoints have special behavior as exceptions.  ### Create  To create a resource, you typically submit an HTTP `POST` request with the resource's required metadata in the request body. The response returns a `201 Created` response code upon success with the resource's metadata, including its internal `id`, in the response body.  ### Read  The HTTP `GET` request can be used to read a resource or to list a number of resources.  A resource's `id` can be submitted in the request parameters to read a specific resource. The response usually returns a `200 OK` response code upon success, with the resource's metadata in the response body.  If a `GET` request does not include a specific resource `id`, it is treated as a list request. The response usually returns a `200 OK` response code upon success, with an object containing a list of resources' metadata in the response body.  When reading resources, some common query parameters are usually available. e.g.: ``` v1/connections?limit=25&offset=25 ```  |Query Parameter|Type|Description| |---------------|----|-----------| |limit|integer|Maximum number of objects to fetch. Usually 25 by default| |offset|integer|Offset after which to start returning objects. For use with limit query parameter.|  ### Update  Updating a resource requires the resource `id`, and is typically done using an HTTP `PATCH` request, with the fields to modify in the request body. The response usually returns a `200 OK` response code upon success, with information about the modified resource in the response body.  ### Delete  Deleting a resource requires the resource `id` and is typically executing via an HTTP `DELETE` request. The response usually returns a `204 No Content` response code upon success.  ## Conventions  - Resource names are plural and expressed in camelCase. - Names are consistent between URL parameter name and field name.  - Field names are in snake_case. ```json {     \"name\": \"string\",     \"slots\": 0,     \"occupied_slots\": 0,     \"used_slots\": 0,     \"queued_slots\": 0,     \"open_slots\": 0 } ```  ### Update Mask  Update mask is available as a query parameter in patch endpoints. It is used to notify the API which fields you want to update. Using `update_mask` makes it easier to update objects by helping the server know which fields to update in an object instead of updating all fields. The update request ignores any fields that aren't specified in the field mask, leaving them with their current values.  Example: ```   resource = request.get('/resource/my-id').json()   resource['my_field'] = 'new-value'   request.patch('/resource/my-id?update_mask=my_field', data=json.dumps(resource)) ```  ## Versioning and Endpoint Lifecycle  - API versioning is not synchronized to specific releases of the Apache Airflow. - APIs are designed to be backward compatible. - Any changes to the API will first go through a deprecation phase.  # Summary of Changes  | Airflow version | Description | |-|-| | v2.0 | Initial release | | v2.0.2    | Added /plugins endpoint | | v2.1 | New providers endpoint |  # Trying the API  You can use a third party client, such as [curl](https://curl.haxx.se/), [HTTPie](https://httpie.org/), [Postman](https://www.postman.com/) or [the Insomnia rest client](https://insomnia.rest/) to test the Apache Airflow API.  Note that you will need to pass credentials data.  For e.g., here is how to pause a DAG with [curl](https://curl.haxx.se/), when basic authorization is used: ```bash curl -X PATCH 'https://example.com/api/v1/dags/{dag_id}?update_mask=is_paused' \\ -H 'Content-Type: application/json' \\ --user \"username:password\" \\ -d '{     \"is_paused\": true }' ```  Using a graphical tool such as [Postman](https://www.postman.com/) or [Insomnia](https://insomnia.rest/), it is possible to import the API specifications directly:  1. Download the API specification by clicking the **Download** button at top of this document 2. Import the JSON specification in the graphical tool of your choice.   - In *Postman*, you can click the **import** button at the top   - With *Insomnia*, you can just drag-and-drop the file on the UI  Note that with *Postman*, you can also generate code snippets by selecting a request and clicking on the **Code** button.  ## Enabling CORS  [Cross-origin resource sharing (CORS)](https://developer.mozilla.org/en-US/docs/Web/HTTP/CORS) is a browser security feature that restricts HTTP requests that are initiated from scripts running in the browser.  For details on enabling/configuring CORS, see [Enabling CORS](https://airflow.apache.org/docs/apache-airflow/stable/security/api.html).  # Authentication  To be able to meet the requirements of many organizations, Airflow supports many authentication methods, and it is even possible to add your own method.  If you want to check which auth backend is currently set, you can use `airflow config get-value api auth_backend` command as in the example below. ```bash $ airflow config get-value api auth_backend airflow.api.auth.backend.basic_auth ``` The default is to deny all requests.  For details on configuring the authentication, see [API Authorization](https://airflow.apache.org/docs/apache-airflow/stable/security/api.html).  # Errors  We follow the error response format proposed in [RFC 7807](https://tools.ietf.org/html/rfc7807) also known as Problem Details for HTTP APIs. As with our normal API responses, your client must be prepared to gracefully handle additional members of the response.  ## Unauthenticated  This indicates that the request has not been applied because it lacks valid authentication credentials for the target resource. Please check that you have valid credentials.  ## PermissionDenied  This response means that the server understood the request but refuses to authorize it because it lacks sufficient rights to the resource. It happens when you do not have the necessary permission to execute the action you performed. You need to get the appropriate permissions in other to resolve this error.  ## BadRequest  This response means that the server cannot or will not process the request due to something that is perceived to be a client error (e.g., malformed request syntax, invalid request message framing, or deceptive request routing). To resolve this, please ensure that your syntax is correct.  ## NotFound  This client error response indicates that the server cannot find the requested resource.  ## MethodNotAllowed  Indicates that the request method is known by the server but is not supported by the target resource.  ## NotAcceptable  The target resource does not have a current representation that would be acceptable to the user agent, according to the proactive negotiation header fields received in the request, and the server is unwilling to supply a default representation.  ## AlreadyExists  The request could not be completed due to a conflict with the current state of the target resource, e.g. the resource it tries to create already exists.  ## Unknown  This means that the server encountered an unexpected condition that prevented it from fulfilling the request. 

API version: 1.0.0
Contact: dev@airflow.apache.org
*/

// Code generated by OpenAPI Generator (https://openapi-generator.tech); DO NOT EDIT.

package airflow

import (
	"bytes"
	"context"
	"encoding/json"
	"encoding/xml"
	"errors"
	"fmt"
	"io"
	"io/ioutil"
	"log"
	"mime/multipart"
	"net/http"
	"net/http/httputil"
	"net/url"
	"os"
	"path/filepath"
	"reflect"
	"regexp"
	"strconv"
	"strings"
	"time"
	"unicode/utf8"

	"golang.org/x/oauth2"
)

var (
	jsonCheck = regexp.MustCompile(`(?i:(?:application|text)/(?:vnd\.[^;]+\+)?json)`)
	xmlCheck  = regexp.MustCompile(`(?i:(?:application|text)/xml)`)
)

// APIClient manages communication with the Airflow API (Stable) API v1.0.0
// In most cases there should be only one, shared, APIClient.
type APIClient struct {
	cfg    *Configuration
	common service // Reuse a single struct instead of allocating one for each service on the heap.

	// API Services

	ConfigApi *ConfigApiService

	ConnectionApi *ConnectionApiService

	DAGApi *DAGApiService

	DAGRunApi *DAGRunApiService

	EventLogApi *EventLogApiService

	ImportErrorApi *ImportErrorApiService

	MonitoringApi *MonitoringApiService

	PermissionApi *PermissionApiService

	PluginApi *PluginApiService

	PoolApi *PoolApiService

	ProviderApi *ProviderApiService

	RoleApi *RoleApiService

	TaskInstanceApi *TaskInstanceApiService

	UserApi *UserApiService

	VariableApi *VariableApiService

	XComApi *XComApiService
}

type service struct {
	client *APIClient
}

// NewAPIClient creates a new API client. Requires a userAgent string describing your application.
// optionally a custom http.Client to allow for advanced features such as caching.
func NewAPIClient(cfg *Configuration) *APIClient {
	if cfg.HTTPClient == nil {
		cfg.HTTPClient = http.DefaultClient
	}

	c := &APIClient{}
	c.cfg = cfg
	c.common.client = c

	// API Services
	c.ConfigApi = (*ConfigApiService)(&c.common)
	c.ConnectionApi = (*ConnectionApiService)(&c.common)
	c.DAGApi = (*DAGApiService)(&c.common)
	c.DAGRunApi = (*DAGRunApiService)(&c.common)
	c.EventLogApi = (*EventLogApiService)(&c.common)
	c.ImportErrorApi = (*ImportErrorApiService)(&c.common)
	c.MonitoringApi = (*MonitoringApiService)(&c.common)
	c.PermissionApi = (*PermissionApiService)(&c.common)
	c.PluginApi = (*PluginApiService)(&c.common)
	c.PoolApi = (*PoolApiService)(&c.common)
	c.ProviderApi = (*ProviderApiService)(&c.common)
	c.RoleApi = (*RoleApiService)(&c.common)
	c.TaskInstanceApi = (*TaskInstanceApiService)(&c.common)
	c.UserApi = (*UserApiService)(&c.common)
	c.VariableApi = (*VariableApiService)(&c.common)
	c.XComApi = (*XComApiService)(&c.common)

	return c
}

func atoi(in string) (int, error) {
	return strconv.Atoi(in)
}

// selectHeaderContentType select a content type from the available list.
func selectHeaderContentType(contentTypes []string) string {
	if len(contentTypes) == 0 {
		return ""
	}
	if contains(contentTypes, "application/json") {
		return "application/json"
	}
	return contentTypes[0] // use the first content type specified in 'consumes'
}

// selectHeaderAccept join all accept types and return
func selectHeaderAccept(accepts []string) string {
	if len(accepts) == 0 {
		return ""
	}

	if contains(accepts, "application/json") {
		return "application/json"
	}

	return strings.Join(accepts, ",")
}

// contains is a case insensitive match, finding needle in a haystack
func contains(haystack []string, needle string) bool {
	for _, a := range haystack {
		if strings.ToLower(a) == strings.ToLower(needle) {
			return true
		}
	}
	return false
}

// Verify optional parameters are of the correct type.
func typeCheckParameter(obj interface{}, expected string, name string) error {
	// Make sure there is an object.
	if obj == nil {
		return nil
	}

	// Check the type is as expected.
	if reflect.TypeOf(obj).String() != expected {
		return fmt.Errorf("Expected %s to be of type %s but received %s.", name, expected, reflect.TypeOf(obj).String())
	}
	return nil
}

// parameterToString convert interface{} parameters to string, using a delimiter if format is provided.
func parameterToString(obj interface{}, collectionFormat string) string {
	var delimiter string

	switch collectionFormat {
	case "pipes":
		delimiter = "|"
	case "ssv":
		delimiter = " "
	case "tsv":
		delimiter = "\t"
	case "csv":
		delimiter = ","
	}

	if reflect.TypeOf(obj).Kind() == reflect.Slice {
		return strings.Trim(strings.Replace(fmt.Sprint(obj), " ", delimiter, -1), "[]")
	} else if t, ok := obj.(time.Time); ok {
		return t.Format(time.RFC3339)
	}

	return fmt.Sprintf("%v", obj)
}

// helper for converting interface{} parameters to json strings
func parameterToJson(obj interface{}) (string, error) {
	jsonBuf, err := json.Marshal(obj)
	if err != nil {
		return "", err
	}
	return string(jsonBuf), err
}

// callAPI do the request.
func (c *APIClient) callAPI(request *http.Request) (*http.Response, error) {
	if c.cfg.Debug {
		dump, err := httputil.DumpRequestOut(request, true)
		if err != nil {
			return nil, err
		}
		log.Printf("\n%s\n", string(dump))
	}

	resp, err := c.cfg.HTTPClient.Do(request)
	if err != nil {
		return resp, err
	}

	if c.cfg.Debug {
		dump, err := httputil.DumpResponse(resp, true)
		if err != nil {
			return resp, err
		}
		log.Printf("\n%s\n", string(dump))
	}
	return resp, err
}

// Allow modification of underlying config for alternate implementations and testing
// Caution: modifying the configuration while live can cause data races and potentially unwanted behavior
func (c *APIClient) GetConfig() *Configuration {
	return c.cfg
}

// prepareRequest build the request
func (c *APIClient) prepareRequest(
	ctx context.Context,
	path string, method string,
	postBody interface{},
	headerParams map[string]string,
	queryParams url.Values,
	formParams url.Values,
	formFileName string,
	fileName string,
	fileBytes []byte) (localVarRequest *http.Request, err error) {

	var body *bytes.Buffer

	// Detect postBody type and post.
	if postBody != nil {
		contentType := headerParams["Content-Type"]
		if contentType == "" {
			contentType = detectContentType(postBody)
			headerParams["Content-Type"] = contentType
		}

		body, err = setBody(postBody, contentType)
		if err != nil {
			return nil, err
		}
	}

	// add form parameters and file if available.
	if strings.HasPrefix(headerParams["Content-Type"], "multipart/form-data") && len(formParams) > 0 || (len(fileBytes) > 0 && fileName != "") {
		if body != nil {
			return nil, errors.New("Cannot specify postBody and multipart form at the same time.")
		}
		body = &bytes.Buffer{}
		w := multipart.NewWriter(body)

		for k, v := range formParams {
			for _, iv := range v {
				if strings.HasPrefix(k, "@") { // file
					err = addFile(w, k[1:], iv)
					if err != nil {
						return nil, err
					}
				} else { // form value
					w.WriteField(k, iv)
				}
			}
		}
		if len(fileBytes) > 0 && fileName != "" {
			w.Boundary()
			//_, fileNm := filepath.Split(fileName)
			part, err := w.CreateFormFile(formFileName, filepath.Base(fileName))
			if err != nil {
				return nil, err
			}
			_, err = part.Write(fileBytes)
			if err != nil {
				return nil, err
			}
		}

		// Set the Boundary in the Content-Type
		headerParams["Content-Type"] = w.FormDataContentType()

		// Set Content-Length
		headerParams["Content-Length"] = fmt.Sprintf("%d", body.Len())
		w.Close()
	}

	if strings.HasPrefix(headerParams["Content-Type"], "application/x-www-form-urlencoded") && len(formParams) > 0 {
		if body != nil {
			return nil, errors.New("Cannot specify postBody and x-www-form-urlencoded form at the same time.")
		}
		body = &bytes.Buffer{}
		body.WriteString(formParams.Encode())
		// Set Content-Length
		headerParams["Content-Length"] = fmt.Sprintf("%d", body.Len())
	}

	// Setup path and query parameters
	url, err := url.Parse(path)
	if err != nil {
		return nil, err
	}

	// Override request host, if applicable
	if c.cfg.Host != "" {
		url.Host = c.cfg.Host
	}

	// Override request scheme, if applicable
	if c.cfg.Scheme != "" {
		url.Scheme = c.cfg.Scheme
	}

	// Adding Query Param
	query := url.Query()
	for k, v := range queryParams {
		for _, iv := range v {
			query.Add(k, iv)
		}
	}

	// Encode the parameters.
	url.RawQuery = query.Encode()

	// Generate a new request
	if body != nil {
		localVarRequest, err = http.NewRequest(method, url.String(), body)
	} else {
		localVarRequest, err = http.NewRequest(method, url.String(), nil)
	}
	if err != nil {
		return nil, err
	}

	// add header parameters, if any
	if len(headerParams) > 0 {
		headers := http.Header{}
		for h, v := range headerParams {
			headers.Set(h, v)
		}
		localVarRequest.Header = headers
	}

	// Add the user agent to the request.
	localVarRequest.Header.Add("User-Agent", c.cfg.UserAgent)

	if ctx != nil {
		// add context to the request
		localVarRequest = localVarRequest.WithContext(ctx)

		// Walk through any authentication.

		// OAuth2 authentication
		if tok, ok := ctx.Value(ContextOAuth2).(oauth2.TokenSource); ok {
			// We were able to grab an oauth2 token from the context
			var latestToken *oauth2.Token
			if latestToken, err = tok.Token(); err != nil {
				return nil, err
			}

			latestToken.SetAuthHeader(localVarRequest)
		}

		// Basic HTTP Authentication
		if auth, ok := ctx.Value(ContextBasicAuth).(BasicAuth); ok {
			localVarRequest.SetBasicAuth(auth.UserName, auth.Password)
		}

		// AccessToken Authentication
		if auth, ok := ctx.Value(ContextAccessToken).(string); ok {
			localVarRequest.Header.Add("Authorization", "Bearer "+auth)
		}

	}

	for header, value := range c.cfg.DefaultHeader {
		localVarRequest.Header.Add(header, value)
	}
	return localVarRequest, nil
}

func (c *APIClient) decode(v interface{}, b []byte, contentType string) (err error) {
	if len(b) == 0 {
		return nil
	}
	if s, ok := v.(*string); ok {
		*s = string(b)
		return nil
	}
	if f, ok := v.(**os.File); ok {
		*f, err = ioutil.TempFile("", "HttpClientFile")
		if err != nil {
			return
		}
		_, err = (*f).Write(b)
		if err != nil {
			return
		}
		_, err = (*f).Seek(0, io.SeekStart)
		return
	}
	if xmlCheck.MatchString(contentType) {
		if err = xml.Unmarshal(b, v); err != nil {
			return err
		}
		return nil
	}
	if jsonCheck.MatchString(contentType) {
		if actualObj, ok := v.(interface{ GetActualInstance() interface{} }); ok { // oneOf, anyOf schemas
			if unmarshalObj, ok := actualObj.(interface{ UnmarshalJSON([]byte) error }); ok { // make sure it has UnmarshalJSON defined
				if err = unmarshalObj.UnmarshalJSON(b); err != nil {
					return err
				}
			} else {
				return errors.New("Unknown type with GetActualInstance but no unmarshalObj.UnmarshalJSON defined")
			}
		} else if err = json.Unmarshal(b, v); err != nil { // simple model
			return err
		}
		return nil
	}
	return errors.New("undefined response type")
}

// Add a file to the multipart request
func addFile(w *multipart.Writer, fieldName, path string) error {
	file, err := os.Open(path)
	if err != nil {
		return err
	}
	defer file.Close()

	part, err := w.CreateFormFile(fieldName, filepath.Base(path))
	if err != nil {
		return err
	}
	_, err = io.Copy(part, file)

	return err
}

// Prevent trying to import "fmt"
func reportError(format string, a ...interface{}) error {
	return fmt.Errorf(format, a...)
}

// Set request body from an interface{}
func setBody(body interface{}, contentType string) (bodyBuf *bytes.Buffer, err error) {
	if bodyBuf == nil {
		bodyBuf = &bytes.Buffer{}
	}

	if reader, ok := body.(io.Reader); ok {
		_, err = bodyBuf.ReadFrom(reader)
	} else if fp, ok := body.(**os.File); ok {
		_, err = bodyBuf.ReadFrom(*fp)
	} else if b, ok := body.([]byte); ok {
		_, err = bodyBuf.Write(b)
	} else if s, ok := body.(string); ok {
		_, err = bodyBuf.WriteString(s)
	} else if s, ok := body.(*string); ok {
		_, err = bodyBuf.WriteString(*s)
	} else if jsonCheck.MatchString(contentType) {
		err = json.NewEncoder(bodyBuf).Encode(body)
	} else if xmlCheck.MatchString(contentType) {
		err = xml.NewEncoder(bodyBuf).Encode(body)
	}

	if err != nil {
		return nil, err
	}

	if bodyBuf.Len() == 0 {
		err = fmt.Errorf("Invalid body type %s\n", contentType)
		return nil, err
	}
	return bodyBuf, nil
}

// detectContentType method is used to figure out `Request.Body` content type for request header
func detectContentType(body interface{}) string {
	contentType := "text/plain; charset=utf-8"
	kind := reflect.TypeOf(body).Kind()

	switch kind {
	case reflect.Struct, reflect.Map, reflect.Ptr:
		contentType = "application/json; charset=utf-8"
	case reflect.String:
		contentType = "text/plain; charset=utf-8"
	default:
		if b, ok := body.([]byte); ok {
			contentType = http.DetectContentType(b)
		} else if kind == reflect.Slice {
			contentType = "application/json; charset=utf-8"
		}
	}

	return contentType
}

// Ripped from https://github.com/gregjones/httpcache/blob/master/httpcache.go
type cacheControl map[string]string

func parseCacheControl(headers http.Header) cacheControl {
	cc := cacheControl{}
	ccHeader := headers.Get("Cache-Control")
	for _, part := range strings.Split(ccHeader, ",") {
		part = strings.Trim(part, " ")
		if part == "" {
			continue
		}
		if strings.ContainsRune(part, '=') {
			keyval := strings.Split(part, "=")
			cc[strings.Trim(keyval[0], " ")] = strings.Trim(keyval[1], ",")
		} else {
			cc[part] = ""
		}
	}
	return cc
}

// CacheExpires helper function to determine remaining time before repeating a request.
func CacheExpires(r *http.Response) time.Time {
	// Figure out when the cache expires.
	var expires time.Time
	now, err := time.Parse(time.RFC1123, r.Header.Get("date"))
	if err != nil {
		return time.Now()
	}
	respCacheControl := parseCacheControl(r.Header)

	if maxAge, ok := respCacheControl["max-age"]; ok {
		lifetime, err := time.ParseDuration(maxAge + "s")
		if err != nil {
			expires = now
		} else {
			expires = now.Add(lifetime)
		}
	} else {
		expiresHeader := r.Header.Get("Expires")
		if expiresHeader != "" {
			expires, err = time.Parse(time.RFC1123, expiresHeader)
			if err != nil {
				expires = now
			}
		}
	}
	return expires
}

func strlen(s string) int {
	return utf8.RuneCountInString(s)
}

// GenericOpenAPIError Provides access to the body, error and model on returned errors.
type GenericOpenAPIError struct {
	body  []byte
	error string
	model interface{}
}

// Error returns non-empty string if there was an error.
func (e GenericOpenAPIError) Error() string {
	return e.error
}

// Body returns the raw bytes of the response
func (e GenericOpenAPIError) Body() []byte {
	return e.body
}

// Model returns the unpacked model of the error
func (e GenericOpenAPIError) Model() interface{} {
	return e.model
}