diff --git a/dev-tools/ansible/roles/java/files/java.security b/dev-tools/ansible/roles/java/files/java.security
new file mode 100644
index 0000000..40a27f1
--- /dev/null
+++ b/dev-tools/ansible/roles/java/files/java.security
@@ -0,0 +1,1283 @@
+#
+# This is the "master security properties file".
+#
+# An alternate java.security properties file may be specified
+# from the command line via the system property
+#
+#    -Djava.security.properties=<URL>
+#
+# This properties file appends to the master security properties file.
+# If both properties files specify values for the same key, the value
+# from the command-line properties file is selected, as it is the last
+# one loaded.
+#
+# Also, if you specify
+#
+#    -Djava.security.properties==<URL> (2 equals),
+#
+# then that properties file completely overrides the master security
+# properties file.
+#
+# To disable the ability to specify an additional properties file from
+# the command line, set the key security.overridePropertiesFile
+# to false in the master security properties file. It is set to true
+# by default.
+
+# In this file, various security properties are set for use by
+# java.security classes. This is where users can statically register
+# Cryptography Package Providers ("providers" for short). The term
+# "provider" refers to a package or set of packages that supply a
+# concrete implementation of a subset of the cryptography aspects of
+# the Java Security API. A provider may, for example, implement one or
+# more digital signature algorithms or message digest algorithms.
+#
+# Each provider must implement a subclass of the Provider class.
+# To register a provider in this master security properties file,
+# specify the provider and priority in the format
+#
+#    security.provider.<n>=<provName | className>
+#
+# This declares a provider, and specifies its preference
+# order n. The preference order is the order in which providers are
+# searched for requested algorithms (when no specific provider is
+# requested). The order is 1-based; 1 is the most preferred, followed
+# by 2, and so on.
+#
+# <provName> must specify the name of the Provider as passed to its super
+# class java.security.Provider constructor. This is for providers loaded
+# through the ServiceLoader mechanism.
+#
+# <className> must specify the subclass of the Provider class whose
+# constructor sets the values of various properties that are required
+# for the Java Security API to look up the algorithms or other
+# facilities implemented by the provider. This is for providers loaded
+# through classpath.
+#
+# Note: Providers can be dynamically registered instead by calls to
+# either the addProvider or insertProviderAt method in the Security
+# class.
+
+#
+# List of providers and their preference orders (see above):
+#
+security.provider.1=SUN
+security.provider.2=SunRsaSign
+security.provider.3=SunEC
+security.provider.4=SunJSSE
+security.provider.5=SunJCE
+security.provider.6=SunJGSS
+security.provider.7=SunSASL
+security.provider.8=XMLDSig
+security.provider.9=SunPCSC
+security.provider.10=JdkLDAP
+security.provider.11=JdkSASL
+security.provider.12=SunPKCS11
+#security.provider.1=SunPKCS11 ${java.home}/lib/security/nss.cfg
+
+#
+# A list of preferred providers for specific algorithms. These providers will
+# be searched for matching algorithms before the list of registered providers.
+# Entries containing errors (parsing, etc) will be ignored. Use the
+# -Djava.security.debug=jca property to debug these errors.
+#
+# The property is a comma-separated list of serviceType.algorithm:provider
+# entries. The serviceType (example: "MessageDigest") is optional, and if
+# not specified, the algorithm applies to all service types that support it.
+# The algorithm is the standard algorithm name or transformation.
+# Transformations can be specified in their full standard name
+# (ex: AES/CBC/PKCS5Padding), or as partial matches (ex: AES, AES/CBC).
+# The provider is the name of the provider. Any provider that does not
+# also appear in the registered list will be ignored.
+#
+# There is a special serviceType for this property only to group a set of
+# algorithms together. The type is "Group" and is followed by an algorithm
+# keyword. Groups are to simplify and lessen the entries on the property
+# line. Current groups are:
+#   Group.SHA2 = SHA-224, SHA-256, SHA-384, SHA-512, SHA-512/224, SHA-512/256
+#   Group.HmacSHA2 = HmacSHA224, HmacSHA256, HmacSHA384, HmacSHA512
+#   Group.SHA2RSA = SHA224withRSA, SHA256withRSA, SHA384withRSA, SHA512withRSA
+#   Group.SHA2DSA = SHA224withDSA, SHA256withDSA, SHA384withDSA, SHA512withDSA
+#   Group.SHA2ECDSA = SHA224withECDSA, SHA256withECDSA, SHA384withECDSA, \
+#                     SHA512withECDSA
+#   Group.SHA3 = SHA3-224, SHA3-256, SHA3-384, SHA3-512
+#   Group.HmacSHA3 = HmacSHA3-224, HmacSHA3-256, HmacSHA3-384, HmacSHA3-512
+#
+# Example:
+#   jdk.security.provider.preferred=AES/GCM/NoPadding:SunJCE, \
+#         MessageDigest.SHA-256:SUN, Group.HmacSHA2:SunJCE
+#
+#jdk.security.provider.preferred=
+
+
+#
+# Sun Provider SecureRandom seed source.
+#
+# Select the primary source of seed data for the "NativePRNG", "SHA1PRNG"
+# and "DRBG" SecureRandom implementations in the "Sun" provider.
+# (Other SecureRandom implementations might also use this property.)
+#
+# On Unix-like systems (for example, Solaris/Linux/MacOS), the
+# "NativePRNG", "SHA1PRNG" and "DRBG" implementations obtains seed data from
+# special device files such as file:/dev/random.
+#
+# On Windows systems, specifying the URLs "file:/dev/random" or
+# "file:/dev/urandom" will enable the native Microsoft CryptoAPI seeding
+# mechanism for SHA1PRNG and DRBG.
+#
+# By default, an attempt is made to use the entropy gathering device
+# specified by the "securerandom.source" Security property.  If an
+# exception occurs while accessing the specified URL:
+#
+#     NativePRNG:
+#         a default value of /dev/random will be used.  If neither
+#         are available, the implementation will be disabled.
+#         "file" is the only currently supported protocol type.
+#
+#     SHA1PRNG and DRBG:
+#         the traditional system/thread activity algorithm will be used.
+#
+# The entropy gathering device can also be specified with the System
+# property "java.security.egd". For example:
+#
+#   % java -Djava.security.egd=file:/dev/random MainClass
+#
+# Specifying this System property will override the
+# "securerandom.source" Security property.
+#
+# In addition, if "file:/dev/random" or "file:/dev/urandom" is
+# specified, the "NativePRNG" implementation will be more preferred than
+# DRBG and SHA1PRNG in the Sun provider.
+#
+securerandom.source=file:/dev/random
+
+#
+# A list of known strong SecureRandom implementations.
+#
+# To help guide applications in selecting a suitable strong
+# java.security.SecureRandom implementation, Java distributions should
+# indicate a list of known strong implementations using the property.
+#
+# This is a comma-separated list of algorithm and/or algorithm:provider
+# entries.
+#
+securerandom.strongAlgorithms=NativePRNGBlocking:SUN,DRBG:SUN
+
+#
+# Sun provider DRBG configuration and default instantiation request.
+#
+# NIST SP 800-90Ar1 lists several DRBG mechanisms. Each can be configured
+# with a DRBG algorithm name, and can be instantiated with a security strength,
+# prediction resistance support, etc. This property defines the configuration
+# and the default instantiation request of "DRBG" SecureRandom implementations
+# in the SUN provider. (Other DRBG implementations can also use this property.)
+# Applications can request different instantiation parameters like security
+# strength, capability, personalization string using one of the
+# getInstance(...,SecureRandomParameters,...) methods with a
+# DrbgParameters.Instantiation argument, but other settings such as the
+# mechanism and DRBG algorithm names are not currently configurable by any API.
+#
+# Please note that the SUN implementation of DRBG always supports reseeding.
+#
+# The value of this property is a comma-separated list of all configurable
+# aspects. The aspects can appear in any order but the same aspect can only
+# appear at most once. Its BNF-style definition is:
+#
+#   Value:
+#     aspect { "," aspect }
+#
+#   aspect:
+#     mech_name | algorithm_name | strength | capability | df
+#
+#   // The DRBG mechanism to use. Default "Hash_DRBG"
+#   mech_name:
+#     "Hash_DRBG" | "HMAC_DRBG" | "CTR_DRBG"
+#
+#   // The DRBG algorithm name. The "SHA-***" names are for Hash_DRBG and
+#   // HMAC_DRBG, default "SHA-256". The "AES-***" names are for CTR_DRBG,
+#   // default "AES-128" when using the limited cryptographic or "AES-256"
+#   // when using the unlimited.
+#   algorithm_name:
+#     "SHA-224" | "SHA-512/224" | "SHA-256" |
+#     "SHA-512/256" | "SHA-384" | "SHA-512" |
+#     "AES-128" | "AES-192" | "AES-256"
+#
+#   // Security strength requested. Default "128"
+#   strength:
+#     "112" | "128" | "192" | "256"
+#
+#   // Prediction resistance and reseeding request. Default "none"
+#   //  "pr_and_reseed" - Both prediction resistance and reseeding
+#   //                    support requested
+#   //  "reseed_only"   - Only reseeding support requested
+#   //  "none"          - Neither prediction resistance not reseeding
+#   //                    support requested
+#   pr:
+#     "pr_and_reseed" | "reseed_only" | "none"
+#
+#   // Whether a derivation function should be used. only applicable
+#   // to CTR_DRBG. Default "use_df"
+#   df:
+#     "use_df" | "no_df"
+#
+# Examples,
+#   securerandom.drbg.config=Hash_DRBG,SHA-224,112,none
+#   securerandom.drbg.config=CTR_DRBG,AES-256,192,pr_and_reseed,use_df
+#
+# The default value is an empty string, which is equivalent to
+#   securerandom.drbg.config=Hash_DRBG,SHA-256,128,none
+#
+securerandom.drbg.config=
+
+#
+# Class to instantiate as the javax.security.auth.login.Configuration
+# provider.
+#
+login.configuration.provider=sun.security.provider.ConfigFile
+
+#
+# Default login configuration file
+#
+#login.config.url.1=file:${user.home}/.java.login.config
+
+#
+# Class to instantiate as the system Policy. This is the name of the class
+# that will be used as the Policy object. The system class loader is used to
+# locate this class.
+#
+policy.provider=sun.security.provider.PolicyFile
+
+# The default is to have a single system-wide policy file,
+# and a policy file in the user's home directory.
+#
+policy.url.1=file:${java.home}/conf/security/java.policy
+policy.url.2=file:${user.home}/.java.policy
+
+# whether or not we expand properties in the policy file
+# if this is set to false, properties (${...}) will not be expanded in policy
+# files.
+#
+policy.expandProperties=true
+
+# whether or not we allow an extra policy to be passed on the command line
+# with -Djava.security.policy=somefile. Comment out this line to disable
+# this feature.
+#
+policy.allowSystemProperty=true
+
+# whether or not we look into the IdentityScope for trusted Identities
+# when encountering a 1.1 signed JAR file. If the identity is found
+# and is trusted, we grant it AllPermission. Note: the default policy
+# provider (sun.security.provider.PolicyFile) does not support this property.
+#
+policy.ignoreIdentityScope=false
+
+#
+# Default keystore type.
+#
+keystore.type=pkcs12
+
+#
+# Controls compatibility mode for JKS and PKCS12 keystore types.
+#
+# When set to 'true', both JKS and PKCS12 keystore types support loading
+# keystore files in either JKS or PKCS12 format. When set to 'false' the
+# JKS keystore type supports loading only JKS keystore files and the PKCS12
+# keystore type supports loading only PKCS12 keystore files.
+#
+keystore.type.compat=true
+
+#
+# List of comma-separated packages that start with or equal this string
+# will cause a security exception to be thrown when passed to the
+# SecurityManager::checkPackageAccess method unless the corresponding
+# RuntimePermission("accessClassInPackage."+package) has been granted.
+#
+package.access=sun.misc.,\
+               sun.reflect.,\
+               org.GNOME.Accessibility.,\
+               org.GNOME.Bonobo.
+
+#
+# List of comma-separated packages that start with or equal this string
+# will cause a security exception to be thrown when passed to the
+# SecurityManager::checkPackageDefinition method unless the corresponding
+# RuntimePermission("defineClassInPackage."+package) has been granted.
+#
+# By default, none of the class loaders supplied with the JDK call
+# checkPackageDefinition.
+#
+package.definition=sun.misc.,\
+                   sun.reflect.,\
+                   org.GNOME.Accessibility.,\
+                   org.GNOME.Bonobo.
+
+#
+# Determines whether this properties file can be appended to
+# or overridden on the command line via -Djava.security.properties
+#
+security.overridePropertiesFile=true
+
+#
+# Determines whether this properties file will be appended to
+# using the system properties file stored at
+# /etc/crypto-policies/back-ends/java.config
+#
+security.useSystemPropertiesFile=true
+
+#
+# Determines the default key and trust manager factory algorithms for
+# the javax.net.ssl package.
+#
+ssl.KeyManagerFactory.algorithm=SunX509
+ssl.TrustManagerFactory.algorithm=PKIX
+
+#
+# The Java-level namelookup cache policy for successful lookups:
+#
+# any negative value: caching forever
+# any positive value: the number of seconds to cache an address for
+# zero: do not cache
+#
+# default value is forever (FOREVER). For security reasons, this
+# caching is made forever when a security manager is set. When a security
+# manager is not set, the default behavior in this implementation
+# is to cache for 30 seconds.
+#
+# NOTE: setting this to anything other than the default value can have
+#       serious security implications. Do not set it unless
+#       you are sure you are not exposed to DNS spoofing attack.
+#
+#networkaddress.cache.ttl=-1
+
+# The Java-level namelookup cache policy for failed lookups:
+#
+# any negative value: cache forever
+# any positive value: the number of seconds to cache negative lookup results
+# zero: do not cache
+#
+# In some Microsoft Windows networking environments that employ
+# the WINS name service in addition to DNS, name service lookups
+# that fail may take a noticeably long time to return (approx. 5 seconds).
+# For this reason the default caching policy is to maintain these
+# results for 10 seconds.
+#
+networkaddress.cache.negative.ttl=10
+
+#
+# Properties to configure OCSP for certificate revocation checking
+#
+
+# Enable OCSP
+#
+# By default, OCSP is not used for certificate revocation checking.
+# This property enables the use of OCSP when set to the value "true".
+#
+# NOTE: SocketPermission is required to connect to an OCSP responder.
+#
+# Example,
+#   ocsp.enable=true
+
+#
+# Location of the OCSP responder
+#
+# By default, the location of the OCSP responder is determined implicitly
+# from the certificate being validated. This property explicitly specifies
+# the location of the OCSP responder. The property is used when the
+# Authority Information Access extension (defined in RFC 5280) is absent
+# from the certificate or when it requires overriding.
+#
+# Example,
+#   ocsp.responderURL=http://ocsp.example.net:80
+
+#
+# Subject name of the OCSP responder's certificate
+#
+# By default, the certificate of the OCSP responder is that of the issuer
+# of the certificate being validated. This property identifies the certificate
+# of the OCSP responder when the default does not apply. Its value is a string
+# distinguished name (defined in RFC 2253) which identifies a certificate in
+# the set of certificates supplied during cert path validation. In cases where
+# the subject name alone is not sufficient to uniquely identify the certificate
+# then both the "ocsp.responderCertIssuerName" and
+# "ocsp.responderCertSerialNumber" properties must be used instead. When this
+# property is set then those two properties are ignored.
+#
+# Example,
+#   ocsp.responderCertSubjectName=CN=OCSP Responder, O=XYZ Corp
+
+#
+# Issuer name of the OCSP responder's certificate
+#
+# By default, the certificate of the OCSP responder is that of the issuer
+# of the certificate being validated. This property identifies the certificate
+# of the OCSP responder when the default does not apply. Its value is a string
+# distinguished name (defined in RFC 2253) which identifies a certificate in
+# the set of certificates supplied during cert path validation. When this
+# property is set then the "ocsp.responderCertSerialNumber" property must also
+# be set. When the "ocsp.responderCertSubjectName" property is set then this
+# property is ignored.
+#
+# Example,
+#   ocsp.responderCertIssuerName=CN=Enterprise CA, O=XYZ Corp
+
+#
+# Serial number of the OCSP responder's certificate
+#
+# By default, the certificate of the OCSP responder is that of the issuer
+# of the certificate being validated. This property identifies the certificate
+# of the OCSP responder when the default does not apply. Its value is a string
+# of hexadecimal digits (colon or space separators may be present) which
+# identifies a certificate in the set of certificates supplied during cert path
+# validation. When this property is set then the "ocsp.responderCertIssuerName"
+# property must also be set. When the "ocsp.responderCertSubjectName" property
+# is set then this property is ignored.
+#
+# Example,
+#   ocsp.responderCertSerialNumber=2A:FF:00
+
+#
+# Policy for failed Kerberos KDC lookups:
+#
+# When a KDC is unavailable (network error, service failure, etc), it is
+# put inside a blacklist and accessed less often for future requests. The
+# value (case-insensitive) for this policy can be:
+#
+# tryLast
+#    KDCs in the blacklist are always tried after those not on the list.
+#
+# tryLess[:max_retries,timeout]
+#    KDCs in the blacklist are still tried by their order in the configuration,
+#    but with smaller max_retries and timeout values. max_retries and timeout
+#    are optional numerical parameters (default 1 and 5000, which means once
+#    and 5 seconds). Please notes that if any of the values defined here is
+#    more than what is defined in krb5.conf, it will be ignored.
+#
+# Whenever a KDC is detected as available, it is removed from the blacklist.
+# The blacklist is reset when krb5.conf is reloaded. You can add
+# refreshKrb5Config=true to a JAAS configuration file so that krb5.conf is
+# reloaded whenever a JAAS authentication is attempted.
+#
+# Example,
+#   krb5.kdc.bad.policy = tryLast
+#   krb5.kdc.bad.policy = tryLess:2,2000
+#
+krb5.kdc.bad.policy = tryLast
+
+#
+# Kerberos cross-realm referrals (RFC 6806)
+#
+# OpenJDK's Kerberos client supports cross-realm referrals as defined in
+# RFC 6806. This allows to setup more dynamic environments in which clients
+# do not need to know in advance how to reach the realm of a target principal
+# (either a user or service).
+#
+# When a client issues an AS or a TGS request, the "canonicalize" option
+# is set to announce support of this feature. A KDC server may fulfill the
+# request or reply referring the client to a different one. If referred,
+# the client will issue a new request and the cycle repeats.
+#
+# In addition to referrals, the "canonicalize" option allows the KDC server
+# to change the client name in response to an AS request. For security reasons,
+# RFC 6806 (section 11) FAST scheme is enforced.
+#
+# Disable Kerberos cross-realm referrals. Value may be overwritten with a
+# System property (-Dsun.security.krb5.disableReferrals).
+sun.security.krb5.disableReferrals=false
+
+# Maximum number of AS or TGS referrals to avoid infinite loops. Value may
+# be overwritten with a System property (-Dsun.security.krb5.maxReferrals).
+sun.security.krb5.maxReferrals=5
+
+#
+# This property contains a list of disabled EC Named Curves that can be included
+# in the jdk.[tls|certpath|jar].disabledAlgorithms properties.  To include this
+# list in any of the disabledAlgorithms properties, add the property name as
+# an entry.
+jdk.disabled.namedCurves = secp256k1
+
+#
+# Algorithm restrictions for certification path (CertPath) processing
+#
+# In some environments, certain algorithms or key lengths may be undesirable
+# for certification path building and validation.  For example, "MD2" is
+# generally no longer considered to be a secure hash algorithm.  This section
+# describes the mechanism for disabling algorithms based on algorithm name
+# and/or key length.  This includes algorithms used in certificates, as well
+# as revocation information such as CRLs and signed OCSP Responses.
+# The syntax of the disabled algorithm string is described as follows:
+#   DisabledAlgorithms:
+#       " DisabledAlgorithm { , DisabledAlgorithm } "
+#
+#   DisabledAlgorithm:
+#       AlgorithmName [Constraint] { '&' Constraint } | IncludeProperty
+#
+#   AlgorithmName:
+#       (see below)
+#
+#   Constraint:
+#       KeySizeConstraint | CAConstraint | DenyAfterConstraint |
+#       UsageConstraint
+#
+#   KeySizeConstraint:
+#       keySize Operator KeyLength
+#
+#   Operator:
+#       <= | < | == | != | >= | >
+#
+#   KeyLength:
+#       Integer value of the algorithm's key length in bits
+#
+#   CAConstraint:
+#       jdkCA
+#
+#   DenyAfterConstraint:
+#       denyAfter YYYY-MM-DD
+#
+#   UsageConstraint:
+#       usage [TLSServer] [TLSClient] [SignedJAR]
+#
+#   IncludeProperty:
+#       include <security property>
+#
+# The "AlgorithmName" is the standard algorithm name of the disabled
+# algorithm. See "Java Cryptography Architecture Standard Algorithm Name
+# Documentation" for information about Standard Algorithm Names.  Matching
+# is performed using a case-insensitive sub-element matching rule.  (For
+# example, in "SHA1withECDSA" the sub-elements are "SHA1" for hashing and
+# "ECDSA" for signatures.)  If the assertion "AlgorithmName" is a
+# sub-element of the certificate algorithm name, the algorithm will be
+# rejected during certification path building and validation.  For example,
+# the assertion algorithm name "DSA" will disable all certificate algorithms
+# that rely on DSA, such as NONEwithDSA, SHA1withDSA.  However, the assertion
+# will not disable algorithms related to "ECDSA".
+#
+# The "IncludeProperty" allows a implementation-defined security property that
+# can be included in the disabledAlgorithms properties.  These properties are
+# to help manage common actions easier across multiple disabledAlgorithm
+# properties.
+# There is one defined security property:  jdk.disabled.NamedCurves
+# See the property for more specific details.
+#
+#
+# A "Constraint" defines restrictions on the keys and/or certificates for
+# a specified AlgorithmName:
+#
+#   KeySizeConstraint:
+#     keySize Operator KeyLength
+#       The constraint requires a key of a valid size range if the
+#       "AlgorithmName" is of a key algorithm.  The "KeyLength" indicates
+#       the key size specified in number of bits.  For example,
+#       "RSA keySize <= 1024" indicates that any RSA key with key size less
+#       than or equal to 1024 bits should be disabled, and
+#       "RSA keySize < 1024, RSA keySize > 2048" indicates that any RSA key
+#       with key size less than 1024 or greater than 2048 should be disabled.
+#       This constraint is only used on algorithms that have a key size.
+#
+#   CAConstraint:
+#     jdkCA
+#       This constraint prohibits the specified algorithm only if the
+#       algorithm is used in a certificate chain that terminates at a marked
+#       trust anchor in the lib/security/cacerts keystore.  If the jdkCA
+#       constraint is not set, then all chains using the specified algorithm
+#       are restricted.  jdkCA may only be used once in a DisabledAlgorithm
+#       expression.
+#       Example:  To apply this constraint to SHA-1 certificates, include
+#       the following:  "SHA1 jdkCA"
+#
+#   DenyAfterConstraint:
+#     denyAfter YYYY-MM-DD
+#       This constraint prohibits a certificate with the specified algorithm
+#       from being used after the date regardless of the certificate's
+#       validity.  JAR files that are signed and timestamped before the
+#       constraint date with certificates containing the disabled algorithm
+#       will not be restricted.  The date is processed in the UTC timezone.
+#       This constraint can only be used once in a DisabledAlgorithm
+#       expression.
+#       Example:  To deny usage of RSA 2048 bit certificates after Feb 3 2020,
+#       use the following:  "RSA keySize == 2048 & denyAfter 2020-02-03"
+#
+#   UsageConstraint:
+#     usage [TLSServer] [TLSClient] [SignedJAR]
+#       This constraint prohibits the specified algorithm for
+#       a specified usage.  This should be used when disabling an algorithm
+#       for all usages is not practical. 'TLSServer' restricts the algorithm
+#       in TLS server certificate chains when server authentication is
+#       performed. 'TLSClient' restricts the algorithm in TLS client
+#       certificate chains when client authentication is performed.
+#       'SignedJAR' constrains use of certificates in signed jar files.
+#       The usage type follows the keyword and more than one usage type can
+#       be specified with a whitespace delimiter.
+#       Example:  "SHA1 usage TLSServer TLSClient"
+#
+# When an algorithm must satisfy more than one constraint, it must be
+# delimited by an ampersand '&'.  For example, to restrict certificates in a
+# chain that terminate at a distribution provided trust anchor and contain
+# RSA keys that are less than or equal to 1024 bits, add the following
+# constraint:  "RSA keySize <= 1024 & jdkCA".
+#
+# All DisabledAlgorithms expressions are processed in the order defined in the
+# property.  This requires lower keysize constraints to be specified
+# before larger keysize constraints of the same algorithm.  For example:
+# "RSA keySize < 1024 & jdkCA, RSA keySize < 2048".
+#
+# Note: The algorithm restrictions do not apply to trust anchors or
+# self-signed certificates.
+#
+# Note: This property is currently used by Oracle's PKIX implementation. It
+# is not guaranteed to be examined and used by other implementations.
+#
+# Example:
+#   jdk.certpath.disabledAlgorithms=MD2, DSA, RSA keySize < 2048
+#
+#
+jdk.certpath.disabledAlgorithms=MD2, MD5, SHA1 jdkCA & usage TLSServer, \
+    RSA keySize < 1024, DSA keySize < 1024, EC keySize < 224, \
+    include jdk.disabled.namedCurves
+
+#
+# Legacy algorithms for certification path (CertPath) processing and
+# signed JAR files.
+#
+# In some environments, a certain algorithm or key length may be undesirable
+# but is not yet disabled.
+#
+# Tools such as keytool and jarsigner may emit warnings when these legacy
+# algorithms are used. See the man pages for those tools for more information.
+#
+# The syntax is the same as the "jdk.certpath.disabledAlgorithms" and
+# "jdk.jar.disabledAlgorithms" security properties.
+#
+# Note: This property is currently used by the JDK Reference
+# implementation. It is not guaranteed to be examined and used by other
+# implementations.
+
+jdk.security.legacyAlgorithms=SHA1, \
+    RSA keySize < 2048, DSA keySize < 2048
+
+#
+# Algorithm restrictions for signed JAR files
+#
+# In some environments, certain algorithms or key lengths may be undesirable
+# for signed JAR validation.  For example, "MD2" is generally no longer
+# considered to be a secure hash algorithm.  This section describes the
+# mechanism for disabling algorithms based on algorithm name and/or key length.
+# JARs signed with any of the disabled algorithms or key sizes will be treated
+# as unsigned.
+#
+# The syntax of the disabled algorithm string is described as follows:
+#   DisabledAlgorithms:
+#       " DisabledAlgorithm { , DisabledAlgorithm } "
+#
+#   DisabledAlgorithm:
+#       AlgorithmName [Constraint] { '&' Constraint }
+#
+#   AlgorithmName:
+#       (see below)
+#
+#   Constraint:
+#       KeySizeConstraint | DenyAfterConstraint
+#
+#   KeySizeConstraint:
+#       keySize Operator KeyLength
+#
+#   DenyAfterConstraint:
+#       denyAfter YYYY-MM-DD
+#
+#   Operator:
+#       <= | < | == | != | >= | >
+#
+#   KeyLength:
+#       Integer value of the algorithm's key length in bits
+#
+# Note: This property is currently used by the JDK Reference
+# implementation. It is not guaranteed to be examined and used by other
+# implementations.
+#
+# See "jdk.certpath.disabledAlgorithms" for syntax descriptions.
+#
+jdk.jar.disabledAlgorithms=MD2, MD5, RSA keySize < 1024, \
+      DSA keySize < 1024, include jdk.disabled.namedCurves
+
+#
+# Algorithm restrictions for Secure Socket Layer/Transport Layer Security
+# (SSL/TLS/DTLS) processing
+#
+# In some environments, certain algorithms or key lengths may be undesirable
+# when using SSL/TLS/DTLS.  This section describes the mechanism for disabling
+# algorithms during SSL/TLS/DTLS security parameters negotiation, including
+# protocol version negotiation, cipher suites selection, peer authentication
+# and key exchange mechanisms.
+#
+# Disabled algorithms will not be negotiated for SSL/TLS connections, even
+# if they are enabled explicitly in an application.
+#
+# For PKI-based peer authentication and key exchange mechanisms, this list
+# of disabled algorithms will also be checked during certification path
+# building and validation, including algorithms used in certificates, as
+# well as revocation information such as CRLs and signed OCSP Responses.
+# This is in addition to the jdk.certpath.disabledAlgorithms property above.
+#
+# See the specification of "jdk.certpath.disabledAlgorithms" for the
+# syntax of the disabled algorithm string.
+#
+# Note: The algorithm restrictions do not apply to trust anchors or
+# self-signed certificates.
+#
+# Note: This property is currently used by the JDK Reference implementation.
+# It is not guaranteed to be examined and used by other implementations.
+#
+# Example:
+#   jdk.tls.disabledAlgorithms=MD5, SSLv3, DSA, RSA keySize < 2048
+jdk.tls.disabledAlgorithms=SSLv3,  RC4, DES, MD5withRSA, \
+    DH keySize < 1024, EC keySize < 224, 3DES_EDE_CBC, anon, NULL, \
+    include jdk.disabled.namedCurves
+
+#
+# Legacy algorithms for Secure Socket Layer/Transport Layer Security (SSL/TLS)
+# processing in JSSE implementation.
+#
+# In some environments, a certain algorithm may be undesirable but it
+# cannot be disabled because of its use in legacy applications.  Legacy
+# algorithms may still be supported, but applications should not use them
+# as the security strength of legacy algorithms are usually not strong enough
+# in practice.
+#
+# During SSL/TLS security parameters negotiation, legacy algorithms will
+# not be negotiated unless there are no other candidates.
+#
+# The syntax of the legacy algorithms string is described as this Java
+# BNF-style:
+#   LegacyAlgorithms:
+#       " LegacyAlgorithm { , LegacyAlgorithm } "
+#
+#   LegacyAlgorithm:
+#       AlgorithmName (standard JSSE algorithm name)
+#
+# See the specification of security property "jdk.certpath.disabledAlgorithms"
+# for the syntax and description of the "AlgorithmName" notation.
+#
+# Per SSL/TLS specifications, cipher suites have the form:
+#       SSL_KeyExchangeAlg_WITH_CipherAlg_MacAlg
+# or
+#       TLS_KeyExchangeAlg_WITH_CipherAlg_MacAlg
+#
+# For example, the cipher suite TLS_RSA_WITH_AES_128_CBC_SHA uses RSA as the
+# key exchange algorithm, AES_128_CBC (128 bits AES cipher algorithm in CBC
+# mode) as the cipher (encryption) algorithm, and SHA-1 as the message digest
+# algorithm for HMAC.
+#
+# The LegacyAlgorithm can be one of the following standard algorithm names:
+#     1. JSSE cipher suite name, e.g., TLS_RSA_WITH_AES_128_CBC_SHA
+#     2. JSSE key exchange algorithm name, e.g., RSA
+#     3. JSSE cipher (encryption) algorithm name, e.g., AES_128_CBC
+#     4. JSSE message digest algorithm name, e.g., SHA
+#
+# See SSL/TLS specifications and "Java Cryptography Architecture Standard
+# Algorithm Name Documentation" for information about the algorithm names.
+#
+# Note: If a legacy algorithm is also restricted through the
+# jdk.tls.disabledAlgorithms property or the
+# java.security.AlgorithmConstraints API (See
+# javax.net.ssl.SSLParameters.setAlgorithmConstraints()),
+# then the algorithm is completely disabled and will not be negotiated.
+#
+# Note: This property is currently used by the JDK Reference implementation.
+# It is not guaranteed to be examined and used by other implementations.
+# There is no guarantee the property will continue to exist or be of the
+# same syntax in future releases.
+#
+# Example:
+#   jdk.tls.legacyAlgorithms=DH_anon, DES_CBC, SSL_RSA_WITH_RC4_128_MD5
+#
+jdk.tls.legacyAlgorithms= \
+        K_NULL, C_NULL, M_NULL, \
+        DH_anon, ECDH_anon, \
+        RC4_128, RC4_40, DES_CBC,TLSV1, TLSV1.1,  DES40_CBC, \
+        3DES_EDE_CBC
+
+#
+# The pre-defined default finite field Diffie-Hellman ephemeral (DHE)
+# parameters for Transport Layer Security (SSL/TLS/DTLS) processing.
+#
+# In traditional SSL/TLS/DTLS connections where finite field DHE parameters
+# negotiation mechanism is not used, the server offers the client group
+# parameters, base generator g and prime modulus p, for DHE key exchange.
+# It is recommended to use dynamic group parameters.  This property defines
+# a mechanism that allows you to specify custom group parameters.
+#
+# The syntax of this property string is described as this Java BNF-style:
+#   DefaultDHEParameters:
+#       DefinedDHEParameters { , DefinedDHEParameters }
+#
+#   DefinedDHEParameters:
+#       "{" DHEPrimeModulus , DHEBaseGenerator "}"
+#
+#   DHEPrimeModulus:
+#       HexadecimalDigits
+#
+#   DHEBaseGenerator:
+#       HexadecimalDigits
+#
+#   HexadecimalDigits:
+#       HexadecimalDigit { HexadecimalDigit }
+#
+#   HexadecimalDigit: one of
+#       0 1 2 3 4 5 6 7 8 9 A B C D E F a b c d e f
+#
+# Whitespace characters are ignored.
+#
+# The "DefinedDHEParameters" defines the custom group parameters, prime
+# modulus p and base generator g, for a particular size of prime modulus p.
+# The "DHEPrimeModulus" defines the hexadecimal prime modulus p, and the
+# "DHEBaseGenerator" defines the hexadecimal base generator g of a group
+# parameter.  It is recommended to use safe primes for the custom group
+# parameters.
+#
+# If this property is not defined or the value is empty, the underlying JSSE
+# provider's default group parameter is used for each connection.
+#
+# If the property value does not follow the grammar, or a particular group
+# parameter is not valid, the connection will fall back and use the
+# underlying JSSE provider's default group parameter.
+#
+# Note: This property is currently used by OpenJDK's JSSE implementation. It
+# is not guaranteed to be examined and used by other implementations.
+#
+# Example:
+#   jdk.tls.server.defaultDHEParameters=
+#       { \
+#       FFFFFFFF FFFFFFFF C90FDAA2 2168C234 C4C6628B 80DC1CD1 \
+#       29024E08 8A67CC74 020BBEA6 3B139B22 514A0879 8E3404DD \
+#       EF9519B3 CD3A431B 302B0A6D F25F1437 4FE1356D 6D51C245 \
+#       E485B576 625E7EC6 F44C42E9 A637ED6B 0BFF5CB6 F406B7ED \
+#       EE386BFB 5A899FA5 AE9F2411 7C4B1FE6 49286651 ECE65381 \
+#       FFFFFFFF FFFFFFFF, 2}
+
+#
+# TLS key limits on symmetric cryptographic algorithms
+#
+# This security property sets limits on algorithms key usage in TLS 1.3.
+# When the amount of data encrypted exceeds the algorithm value listed below,
+# a KeyUpdate message will trigger a key change.  This is for symmetric ciphers
+# with TLS 1.3 only.
+#
+# The syntax for the property is described below:
+#   KeyLimits:
+#       " KeyLimit { , KeyLimit } "
+#
+#   WeakKeyLimit:
+#       AlgorithmName Action Length
+#
+#   AlgorithmName:
+#       A full algorithm transformation.
+#
+#   Action:
+#       KeyUpdate
+#
+#   Length:
+#       The amount of encrypted data in a session before the Action occurs
+#       This value may be an integer value in bytes, or as a power of two, 2^29.
+#
+#   KeyUpdate:
+#       The TLS 1.3 KeyUpdate handshake process begins when the Length amount
+#       is fulfilled.
+#
+# Note: This property is currently used by OpenJDK's JSSE implementation. It
+# is not guaranteed to be examined and used by other implementations.
+#
+jdk.tls.keyLimits=AES/GCM/NoPadding KeyUpdate 2^37
+
+#
+# Cryptographic Jurisdiction Policy defaults
+#
+# Import and export control rules on cryptographic software vary from
+# country to country.  By default, Java provides two different sets of
+# cryptographic policy files[1]:
+#
+#     unlimited:  These policy files contain no restrictions on cryptographic
+#                 strengths or algorithms
+#
+#     limited:    These policy files contain more restricted cryptographic
+#                 strengths
+#
+# The default setting is determined by the value of the "crypto.policy"
+# Security property below. If your country or usage requires the
+# traditional restrictive policy, the "limited" Java cryptographic
+# policy is still available and may be appropriate for your environment.
+#
+# If you have restrictions that do not fit either use case mentioned
+# above, Java provides the capability to customize these policy files.
+# The "crypto.policy" security property points to a subdirectory
+# within <java-home>/conf/security/policy/ which can be customized.
+# Please see the <java-home>/conf/security/policy/README.txt file or consult
+# the Java Security Guide/JCA documentation for more information.
+#
+# YOU ARE ADVISED TO CONSULT YOUR EXPORT/IMPORT CONTROL COUNSEL OR ATTORNEY
+# TO DETERMINE THE EXACT REQUIREMENTS.
+#
+# [1] Please note that the JCE for Java SE, including the JCE framework,
+# cryptographic policy files, and standard JCE providers provided with
+# the Java SE, have been reviewed and approved for export as mass market
+# encryption item by the US Bureau of Industry and Security.
+#
+# Note: This property is currently used by the JDK Reference implementation.
+# It is not guaranteed to be examined and used by other implementations.
+#
+crypto.policy=unlimited
+
+#
+# The policy for the XML Signature secure validation mode. The mode is
+# enabled by setting the property "org.jcp.xml.dsig.secureValidation" to
+# true with the javax.xml.crypto.XMLCryptoContext.setProperty() method,
+# or by running the code with a SecurityManager.
+#
+#   Policy:
+#       Constraint {"," Constraint }
+#   Constraint:
+#       AlgConstraint | MaxTransformsConstraint | MaxReferencesConstraint |
+#       ReferenceUriSchemeConstraint | KeySizeConstraint | OtherConstraint
+#   AlgConstraint
+#       "disallowAlg" Uri
+#   MaxTransformsConstraint:
+#       "maxTransforms" Integer
+#   MaxReferencesConstraint:
+#       "maxReferences" Integer
+#   ReferenceUriSchemeConstraint:
+#       "disallowReferenceUriSchemes" String { String }
+#   KeySizeConstraint:
+#       "minKeySize" KeyAlg Integer
+#   OtherConstraint:
+#       "noDuplicateIds" | "noRetrievalMethodLoops"
+#
+# For AlgConstraint, Uri is the algorithm URI String that is not allowed.
+# See the XML Signature Recommendation for more information on algorithm
+# URI Identifiers. For KeySizeConstraint, KeyAlg is the standard algorithm
+# name of the key type (ex: "RSA"). If the MaxTransformsConstraint,
+# MaxReferencesConstraint or KeySizeConstraint (for the same key type) is
+# specified more than once, only the last entry is enforced.
+#
+# Note: This property is currently used by the JDK Reference implementation. It
+# is not guaranteed to be examined and used by other implementations.
+#
+jdk.xml.dsig.secureValidationPolicy=\
+    disallowAlg http://www.w3.org/TR/1999/REC-xslt-19991116,\
+    disallowAlg http://www.w3.org/2001/04/xmldsig-more#rsa-md5,\
+    disallowAlg http://www.w3.org/2001/04/xmldsig-more#hmac-md5,\
+    disallowAlg http://www.w3.org/2001/04/xmldsig-more#md5,\
+    maxTransforms 5,\
+    maxReferences 30,\
+    disallowReferenceUriSchemes file http https,\
+    minKeySize RSA 1024,\
+    minKeySize DSA 1024,\
+    minKeySize EC 224,\
+    noDuplicateIds,\
+    noRetrievalMethodLoops
+
+#
+# Serialization process-wide filter
+#
+# A filter, if configured, is used by java.io.ObjectInputStream during
+# deserialization to check the contents of the stream.
+# A filter is configured as a sequence of patterns, each pattern is either
+# matched against the name of a class in the stream or defines a limit.
+# Patterns are separated by ";" (semicolon).
+# Whitespace is significant and is considered part of the pattern.
+#
+# If the system property jdk.serialFilter is also specified on the command
+# line, it supersedes the security property value defined here.
+#
+# If a pattern includes a "=", it sets a limit.
+# If a limit appears more than once the last value is used.
+# Limits are checked before classes regardless of the order in the
+# sequence of patterns.
+# If any of the limits are exceeded, the filter status is REJECTED.
+#
+#   maxdepth=value - the maximum depth of a graph
+#   maxrefs=value  - the maximum number of internal references
+#   maxbytes=value - the maximum number of bytes in the input stream
+#   maxarray=value - the maximum array length allowed
+#
+# Other patterns, from left to right, match the class or package name as
+# returned from Class.getName.
+# If the class is an array type, the class or package to be matched is the
+# element type.
+# Arrays of any number of dimensions are treated the same as the element type.
+# For example, a pattern of "!example.Foo", rejects creation of any instance or
+# array of example.Foo.
+#
+# If the pattern starts with "!", the status is REJECTED if the remaining
+# pattern is matched; otherwise the status is ALLOWED if the pattern matches.
+# If the pattern contains "/", the non-empty prefix up to the "/" is the
+# module name;
+#   if the module name matches the module name of the class then
+#   the remaining pattern is matched with the class name.
+#   If there is no "/", the module name is not compared.
+# If the pattern ends with ".**" it matches any class in the package and all
+# subpackages.
+# If the pattern ends with ".*" it matches any class in the package.
+# If the pattern ends with "*", it matches any class with the pattern as a
+# prefix.
+# If the pattern is equal to the class name, it matches.
+# Otherwise, the status is UNDECIDED.
+#
+#jdk.serialFilter=pattern;pattern
+
+#
+# RMI Registry Serial Filter
+#
+# The filter pattern uses the same format as jdk.serialFilter.
+# This filter can override the builtin filter if additional types need to be
+# allowed or rejected from the RMI Registry or to decrease limits but not
+# to increase limits.
+# If the limits (maxdepth, maxrefs, or maxbytes) are exceeded, the object is rejected.
+#
+# Each non-array type is allowed or rejected if it matches one of the patterns,
+# evaluated from left to right, and is otherwise allowed. Arrays of any
+# component type, including subarrays and arrays of primitives, are allowed.
+#
+# Array construction of any component type, including subarrays and arrays of
+# primitives, are allowed unless the length is greater than the maxarray limit.
+# The filter is applied to each array element.
+#
+# Note: This property is currently used by the JDK Reference implementation.
+# It is not guaranteed to be examined and used by other implementations.
+#
+# The built-in filter allows subclasses of allowed classes and
+# can approximately be represented as the pattern:
+#
+#sun.rmi.registry.registryFilter=\
+#    maxarray=1000000;\
+#    maxdepth=20;\
+#    java.lang.String;\
+#    java.lang.Number;\
+#    java.lang.reflect.Proxy;\
+#    java.rmi.Remote;\
+#    sun.rmi.server.UnicastRef;\
+#    sun.rmi.server.RMIClientSocketFactory;\
+#    sun.rmi.server.RMIServerSocketFactory;\
+#    java.rmi.activation.ActivationID;\
+#    java.rmi.server.UID
+#
+# RMI Distributed Garbage Collector (DGC) Serial Filter
+#
+# The filter pattern uses the same format as jdk.serialFilter.
+# This filter can override the builtin filter if additional types need to be
+# allowed or rejected from the RMI DGC.
+#
+# Note: This property is currently used by the JDK Reference implementation.
+# It is not guaranteed to be examined and used by other implementations.
+#
+# The builtin DGC filter can approximately be represented as the filter pattern:
+#
+#sun.rmi.transport.dgcFilter=\
+#    java.rmi.server.ObjID;\
+#    java.rmi.server.UID;\
+#    java.rmi.dgc.VMID;\
+#    java.rmi.dgc.Lease;\
+#    maxdepth=5;maxarray=10000
+
+# CORBA ORBIorTypeCheckRegistryFilter
+# Type check enhancement for ORB::string_to_object processing
+#
+# An IOR type check filter, if configured, is used by an ORB during
+# an ORB::string_to_object invocation to check the veracity of the type encoded
+# in the ior string.
+#
+# The filter pattern consists of a semi-colon separated list of class names.
+# The configured list contains the binary class names of the IDL interface types
+# corresponding to the IDL stub class to be instantiated.
+# As such, a filter specifies a list of IDL stub classes that will be
+# allowed by an ORB when an ORB::string_to_object is invoked.
+# It is used to specify a white list configuration of acceptable
+# IDL stub types which may be contained in a stringified IOR
+# parameter passed as input to an ORB::string_to_object method.
+#
+# Note: This property is currently used by the JDK Reference implementation.
+# It is not guaranteed to be examined and used by other implementations.
+#
+#com.sun.CORBA.ORBIorTypeCheckRegistryFilter=binary_class_name;binary_class_name
+
+# The iteration count used for password-based encryption (PBE) in JCEKS
+# keystores. Values in the range 10000 to 5000000 are considered valid.
+# If the value is out of this range, or is not a number, or is unspecified;
+# a default of 200000 is used.
+#
+# If the system property jdk.jceks.iterationCount is also specified, it
+# supersedes the security property value defined here.
+#
+#jdk.jceks.iterationCount = 200000
+
+#
+# JCEKS Encrypted Key Serial Filter
+#
+# This filter, if configured, is used by the JCEKS KeyStore during the
+# deserialization of the encrypted Key object stored inside a key entry.
+# If not configured or the filter result is UNDECIDED (i.e. none of the patterns
+# matches), the filter configured by jdk.serialFilter will be consulted.
+#
+# If the system property jceks.key.serialFilter is also specified, it supersedes
+# the security property value defined here.
+#
+# The filter pattern uses the same format as jdk.serialFilter. The default
+# pattern allows java.lang.Enum, java.security.KeyRep, java.security.KeyRep$Type,
+# and javax.crypto.spec.SecretKeySpec and rejects all the others.
+jceks.key.serialFilter = java.base/java.lang.Enum;java.base/java.security.KeyRep;\
+  java.base/java.security.KeyRep$Type;java.base/javax.crypto.spec.SecretKeySpec;!*
+
+#
+# Enhanced exception message information
+#
+# By default, exception messages should not include potentially sensitive
+# information such as file names, host names, or port numbers. This property
+# accepts one or more comma separated values, each of which represents a
+# category of enhanced exception message information to enable. Values are
+# case-insensitive. Leading and trailing whitespaces, surrounding each value,
+# are ignored. Unknown values are ignored.
+#
+# NOTE: Use caution before setting this property. Setting this property
+# exposes sensitive information in Exceptions, which could, for example,
+# propagate to untrusted code or be emitted in stack traces that are
+# inadvertently disclosed and made accessible over a public network.
+#
+# The categories are:
+#
+#  hostInfo - IOExceptions thrown by java.net.Socket and the socket types in the
+#             java.nio.channels package will contain enhanced exception
+#             message information
+#
+# The property setting in this file can be overridden by a system property of
+# the same name, with the same syntax and possible values.
+#
+#jdk.includeInExceptions=hostInfo
+
+#
+# Disabled mechanisms for the Simple Authentication and Security Layer (SASL)
+#
+# Disabled mechanisms will not be negotiated by both SASL clients and servers.
+# These mechanisms will be ignored if they are specified in the "mechanisms"
+# argument of "Sasl.createSaslClient" or the "mechanism" argument of
+# "Sasl.createSaslServer".
+#
+# The value of this property is a comma-separated list of SASL mechanisms.
+# The mechanisms are case-sensitive. Whitespaces around the commas are ignored.
+#
+# Note: This property is currently used by the JDK Reference implementation.
+# It is not guaranteed to be examined and used by other implementations.
+#
+# Example:
+#   jdk.sasl.disabledMechanisms=PLAIN, CRAM-MD5, DIGEST-MD5
+jdk.sasl.disabledMechanisms=
+
+#
+# Policies for distrusting Certificate Authorities (CAs).
+#
+# This is a comma separated value of one or more case-sensitive strings, each
+# of which represents a policy for determining if a CA should be distrusted.
+# The supported values are:
+#
+#   SYMANTEC_TLS : Distrust TLS Server certificates anchored by a Symantec
+#   root CA and issued after April 16, 2019 unless issued by one of the
+#   following subordinate CAs which have a later distrust date:
+#     1. Apple IST CA 2 - G1, SHA-256 fingerprint:
+#        AC2B922ECFD5E01711772FEA8ED372DE9D1E2245FCE3F57A9CDBEC77296A424B
+#        Distrust after December 31, 2019.
+#     2. Apple IST CA 8 - G1, SHA-256 fingerprint:
+#        A4FE7C7F15155F3F0AEF7AAA83CF6E06DEB97CA3F909DF920AC1490882D488ED
+#        Distrust after December 31, 2019.
+#
+# Leading and trailing whitespace surrounding each value are ignored.
+# Unknown values are ignored. If the property is commented out or set to the
+# empty String, no policies are enforced.
+#
+# Note: This property is currently used by the JDK Reference implementation.
+# It is not guaranteed to be supported by other SE implementations. Also, this
+# property does not override other security properties which can restrict
+# certificates such as jdk.tls.disabledAlgorithms or
+# jdk.certpath.disabledAlgorithms; those restrictions are still enforced even
+# if this property is not enabled.
+#
+jdk.security.caDistrustPolicies=SYMANTEC_TLS
+
+#
+# FilePermission path canonicalization
+#
+# This security property dictates how the path argument is processed and stored
+# while constructing a FilePermission object. If the value is set to true, the
+# path argument is canonicalized and FilePermission methods (such as implies,
+# equals, and hashCode) are implemented based on this canonicalized result.
+# Otherwise, the path argument is not canonicalized and FilePermission methods are
+# implemented based on the original input. See the implementation note of the
+# FilePermission class for more details.
+#
+# If a system property of the same name is also specified, it supersedes the
+# security property value defined here.
+#
+# The default value for this property is false.
+#
+jdk.io.permissionsUseCanonicalPath=false
+
+
+#
+# Policies for the proxy_impersonator Kerberos ccache configuration entry
+#
+# The proxy_impersonator ccache configuration entry indicates that the ccache
+# is a synthetic delegated credential for use with S4U2Proxy by an intermediate
+# server. The ccache file should also contain the TGT of this server and
+# an evidence ticket from the default principal of the ccache to this server.
+#
+# This security property determines how Java uses this configuration entry.
+# There are 3 possible values:
+#
+#  no-impersonate     - Ignore this configuration entry, and always act as
+#                       the owner of the TGT (if it exists).
+#
+#  try-impersonate    - Try impersonation when this configuration entry exists.
+#                       If no matching TGT or evidence ticket is found,
+#                       fallback to no-impersonate.
+#
+#  always-impersonate - Always impersonate when this configuration entry exists.
+#                       If no matching TGT or evidence ticket is found,
+#                       no initial credential is read from the ccache.
+#
+# The default value is "always-impersonate".
+#
+# If a system property of the same name is also specified, it supersedes the
+# security property value defined here.
+#
+#jdk.security.krb5.default.initiate.credential=always-impersonate
+
+#
+# Trust Anchor Certificates - CA Basic Constraint check
+#
+# X.509 v3 certificates used as Trust Anchors (to validate signed code or TLS
+# connections) must have the cA Basic Constraint field set to 'true'. Also, if
+# they include a Key Usage extension, the keyCertSign bit must be set. These
+# checks, enabled by default, can be disabled for backward-compatibility
+# purposes with the jdk.security.allowNonCaAnchor System and Security
+# properties. In the case that both properties are simultaneously set, the
+# System value prevails. The default value of the property is "false".
+#
+#jdk.security.allowNonCaAnchor=true
+
+#
+# JNDI Object Factories Filter
+#
+# This filter is used by the JNDI runtime to control the set of object factory classes
+# which will be allowed to instantiate objects from object references returned by
+# naming/directory systems. The factory class named by the reference instance will be
+# matched against this filter. The filter property supports pattern-based filter syntax
+# with the same format as jdk.serialFilter.
+#
+# Each pattern is matched against the factory class name to allow or disallow it's
+# instantiation. The access to a factory class is allowed unless the filter returns
+# REJECTED.
+#
+# Note: This property is currently used by the JDK Reference implementation.
+# It is not guaranteed to be examined and used by other implementations.
+#
+# If the system property jdk.jndi.object.factoriesFilter is also specified, it supersedes
+# the security property value defined here. The default value of the property is "*".
+#
+# The default pattern value allows any object factory class specified by the reference
+# instance to recreate the referenced object.
+#jdk.jndi.object.factoriesFilter=*
diff --git a/dev-tools/ansible/roles/java/tasks/main.yml b/dev-tools/ansible/roles/java/tasks/main.yml
index 3513e48..c701167 100644
--- a/dev-tools/ansible/roles/java/tasks/main.yml
+++ b/dev-tools/ansible/roles/java/tasks/main.yml
@@ -20,7 +20,7 @@
 
 ---
 - name: Install OpenJDK 11
-  yum: name=java-11-openjdk-devel state=latest update_cache=yes
+  yum: name="{{ openjdk_version }}" state=present update_cache=yes
   become: yes
   tags:
     - always
@@ -39,3 +39,13 @@
   become: yes
   tags:
        - always
+
+- name: Copy java.security file to {{ java_home }}
+  copy:
+    src: java.security
+    dest: "{{ java_home }}/conf/security/java.security"
+    mode: 644
+    backup: yes
+  become: yes
+  tags:
+       - always
diff --git a/dev-tools/ansible/roles/java/vars/main.yml b/dev-tools/ansible/roles/java/vars/main.yml
index 62152d1..107bd61 100644
--- a/dev-tools/ansible/roles/java/vars/main.yml
+++ b/dev-tools/ansible/roles/java/vars/main.yml
@@ -22,4 +22,5 @@
 #Variables associated with this role
 
 java_home: "/usr/lib/jvm/java-11"
+openjdk_version: "java-11-openjdk-devel-11.0.11.0.9"
 ...