﻿/*
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The ASF licenses this file to You under the Apache License, Version 2.0
 * (the "License"); you may not use this file except in compliance with
 * the License.  You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

using System;
using System.Threading;
using Apache.NMS.Stomp.Commands;
using Apache.NMS.Stomp.Threads;
using Apache.NMS.Stomp.Util;
using Apache.NMS.Stomp.Protocol;
using Apache.NMS.Util;

namespace Apache.NMS.Stomp.Transport
{
    /// <summary>
    /// This class make sure that the connection is still alive,
    /// by monitoring the reception of commands from the peer of
    /// the transport.
    /// </summary>
    public class InactivityMonitor : TransportFilter
    {
        private readonly Atomic<bool> monitorStarted = new Atomic<bool>(false);

        private readonly Atomic<bool> commandSent = new Atomic<bool>(false);
        private readonly Atomic<bool> commandReceived = new Atomic<bool>(false);

        private readonly Atomic<bool> failed = new Atomic<bool>(false);
        private readonly Atomic<bool> inRead = new Atomic<bool>(false);
        private readonly Atomic<bool> inWrite = new Atomic<bool>(false);

        private CompositeTaskRunner asyncTasks;
        private AsyncSignalReadErrorkTask asyncErrorTask;
        private AsyncWriteTask asyncWriteTask;

        private readonly Mutex monitor = new Mutex();

        private static int id = 0;
        private readonly int instanceId = 0;
        private bool disposing = false;

        private Timer connectionCheckTimer;

        private DateTime lastReadCheckTime;

        private long readCheckTime = 30000;
        public long ReadCheckTime
        {
            get { return this.readCheckTime; }
            set { this.readCheckTime = value; }
        }

        private long writeCheckTime = 10000;
        public long WriteCheckTime
        {
            get { return this.writeCheckTime; }
            set { this.writeCheckTime = value; }
        }

        private long initialDelayTime = 0;
        public long InitialDelayTime
        {
            get { return this.initialDelayTime; }
            set { this.initialDelayTime = value; }
        }

        // Local and remote Wire Format Information
        private StompWireFormat localWireFormatInfo;
        private WireFormatInfo remoteWireFormatInfo;

        /// <summary>
        /// Constructor or the Inactivity Monitor
        /// </summary>
        /// <param name="next"></param>
        /// <param name="wireFormat"></param>
        public InactivityMonitor(ITransport next, StompWireFormat wireFormat)
            : base(next)
        {
            this.instanceId = ++id;
            this.localWireFormatInfo = wireFormat;
            Tracer.DebugFormat("Creating Inactivity Monitor: {0}", instanceId);
        }

        ~InactivityMonitor()
        {
            Dispose(false);
        }

        protected override void Dispose(bool disposing)
        {
            if(disposing)
            {
                // get rid of unmanaged stuff
            }

            lock(monitor)
            {
                this.localWireFormatInfo = null;
                this.remoteWireFormatInfo = null;
                this.disposing = true;
                StopMonitorThreads();
            }

            base.Dispose(disposing);
        }

        public void CheckConnection(object state)
        {
            Tracer.DebugFormat("CheckConnection: Timer Elapsed at {0}", DateTime.Now.ToLocalTime());

            // First see if we have written or can write.
            WriteCheck();

            // Now check is we've read anything, if not then we send
            // a new KeepAlive with response required.
            ReadCheck();
        }

        #region WriteCheck Related
        /// <summary>
        /// Check the write to the broker
        /// </summary>
        public void WriteCheck()
        {
            if(this.inWrite.Value || this.failed.Value)
            {
                Tracer.DebugFormat("InactivityMonitor[{0}]: is in write or already failed.", instanceId);
                return;
            }

            if(!commandSent.Value)
            {
                Tracer.DebugFormat("InactivityMonitor[{0}]: No Message sent since last write check. Sending a KeepAliveInfo.", instanceId);
                this.asyncWriteTask.IsPending = true;
                this.asyncTasks.Wakeup();
            }
            else
            {
                Tracer.DebugFormat("InactivityMonitor[{0}]: Message sent since last write check. Resetting flag.", instanceId);
            }

            commandSent.Value = false;
        }
        #endregion

        #region ReadCheck Related
        public void ReadCheck()
        {
            DateTime now = DateTime.Now;
            TimeSpan elapsed = now - this.lastReadCheckTime;

            if(!AllowReadCheck(elapsed))
            {
                Tracer.Debug("InactivityMonitor["+ instanceId +"]: A read check is not currently allowed.");
                return;
            }

            this.lastReadCheckTime = now;

            if(this.inRead.Value || this.failed.Value || this.asyncErrorTask == null)
            {
                Tracer.DebugFormat("InactivityMonitor[{0}]: A receive is in progress or already failed.", instanceId);
                return;
            }

            if(!commandReceived.Value)
            {
                Tracer.DebugFormat("InactivityMonitor[{0}]: No message received since last read check! Sending an InactivityException!", instanceId);
                this.asyncErrorTask.IsPending = true;
                this.asyncTasks.Wakeup();
            }
            else
            {
                commandReceived.Value = false;
            }
        }

        /// <summary>
        /// Checks if we should allow the read check(if less than 90% of the read
        /// check time elapsed then we dont do the readcheck
        /// </summary>
        /// <param name="elapsed"></param>
        /// <returns></returns>
        public bool AllowReadCheck(TimeSpan elapsed)
        {
            return (elapsed.TotalMilliseconds > readCheckTime);
        }
        #endregion

        public override void Stop()
        {
            StopMonitorThreads();
            next.Stop();
        }

        protected override void OnCommand(ITransport sender, Command command)
        {
            commandReceived.Value = true;
            inRead.Value = true;
            try
            {
                if(command.IsWireFormatInfo)
                {
                    lock(monitor)
                    {
                        remoteWireFormatInfo = command as WireFormatInfo;
                        try
                        {
                            StartMonitorThreads();
                        }
                        catch(IOException ex)
                        {
                            OnException(this, ex);
                        }
                    }
                }
                else if(command.IsKeepAliveInfo)
                {
                    if(Tracer.IsDebugEnabled)
                    {
                        Tracer.DebugFormat("InactivityMonitor[{0}]: New Keep Alive Received at -> " +
                                           DateTime.Now.ToLongTimeString().TrimEnd(" APM".ToCharArray()) +
                                           "." + DateTime.Now.Millisecond, instanceId);
                    }
                }

                base.OnCommand(sender, command);
            }
            finally
            {
                inRead.Value = false;
            }
        }

        public override void Oneway(Command command)
        {
            // Disable inactivity monitoring while processing a command.
            //synchronize this method - its not synchronized
            //further down the transport stack and gets called by more
            //than one thread  by this class
            lock(inWrite)
            {
                inWrite.Value = true;
                try
                {
                    if(failed.Value)
                    {
                        throw new IOException("Channel was inactive for too long: " + next.RemoteAddress.ToString());
                    }
                    if(command.IsConnectionInfo)
                    {
                        lock(monitor)
                        {
                            StartMonitorThreads();
                        }
                    }
                    next.Oneway(command);
                }
                finally
                {
                    commandSent.Value = true;
                    inWrite.Value = false;
                }
            }
        }

        protected override void OnException(ITransport sender, Exception command)
        {
            if(failed.CompareAndSet(false, true) && !this.disposing)
            {
                Tracer.DebugFormat("Exception received in the Inactivity Monitor: {0}", command.Message);
                StopMonitorThreads();
                base.OnException(sender, command);
            }
        }

        private void StartMonitorThreads()
        {
            lock(monitor)
            {
                if(this.IsDisposed || this.disposing)
                {
                    return;
                }
                
                if(monitorStarted.Value)
                {
                    return;
                }

                if(localWireFormatInfo == null)
                {
                    return;
                }

                if(remoteWireFormatInfo == null)
                {
                    return;
                }

                if(localWireFormatInfo.MaxInactivityDuration != 0 &&
                   remoteWireFormatInfo.WriteCheckInterval != 0)
                {
                    readCheckTime =
                        Math.Max(
                            localWireFormatInfo.ReadCheckInterval,
                            remoteWireFormatInfo.WriteCheckInterval);

                    this.asyncErrorTask = new AsyncSignalReadErrorkTask(this, next.RemoteAddress);
                }

                if(localWireFormatInfo.MaxInactivityDuration != 0)
                {
                    if(remoteWireFormatInfo.Version > 1.0)
                    {
                        writeCheckTime =
                            Math.Max(localWireFormatInfo.WriteCheckInterval,
                                     remoteWireFormatInfo.ReadCheckInterval);
                    }
                    else
                    {
                        writeCheckTime = localWireFormatInfo.WriteCheckInterval;
                    }

                    this.asyncWriteTask = new AsyncWriteTask(this);
                }

                initialDelayTime = localWireFormatInfo.MaxInactivityDurationInitialDelay > 0 ?
                                       localWireFormatInfo.MaxInactivityDurationInitialDelay : writeCheckTime;

                Tracer.DebugFormat("InactivityMonitor[{0}]: Read Check time interval: {1}",
                                   instanceId, readCheckTime );
                Tracer.DebugFormat("InactivityMonitor[{0}]: Initial Delay time interval: {1}",
                                   instanceId, initialDelayTime );

                this.asyncTasks = new CompositeTaskRunner();

                if(this.asyncErrorTask != null)
                {
                    Tracer.DebugFormat("InactivityMonitor[{0}]: Adding the Async Read Check Task to the Runner.", instanceId);
                    this.asyncTasks.AddTask(this.asyncErrorTask);
                }

                if(this.asyncWriteTask != null)
                {
                    Tracer.DebugFormat("InactivityMonitor[{0}]: Write Check time interval: {1}",
                                       instanceId, writeCheckTime );
                    this.asyncTasks.AddTask(this.asyncWriteTask);
                }

                if(this.asyncErrorTask != null || this.asyncWriteTask != null)
                {
                    Tracer.DebugFormat("InactivityMonitor[{0}]: Starting the Monitor Timer.", instanceId);
                    monitorStarted.Value = true;

                    this.connectionCheckTimer = new Timer(
                        new TimerCallback(CheckConnection),
                        null,
                        initialDelayTime,
                        writeCheckTime
                        );
                }
            }
        }

        private void StopMonitorThreads()
        {
            lock(monitor)
            {
                if(monitorStarted.CompareAndSet(true, false))
                {
                    // Attempt to wait for the Timer to shutdown, but don't wait
                    // forever, if they don't shutdown after two seconds, just quit.
                    ThreadUtil.DisposeTimer(connectionCheckTimer, 2000);

                    this.asyncTasks.Shutdown();
                    this.asyncTasks = null;
                    this.asyncWriteTask = null;
                    this.asyncErrorTask = null;
                }
            }
        }

        #region Async Tasks
        // Task that fires when the TaskRunner is signaled by the ReadCheck Timer Task.
        class AsyncSignalReadErrorkTask : CompositeTask
        {
            private readonly InactivityMonitor parent;
            private readonly Uri remote;
            private readonly Atomic<bool> pending = new Atomic<bool>(false);

            public AsyncSignalReadErrorkTask(InactivityMonitor parent, Uri remote)
            {
                this.parent = parent;
                this.remote = remote;
            }

            public bool IsPending
            {
                get { return this.pending.Value; }
                set { this.pending.Value = value; }
            }

            public bool Iterate()
            {
                if(this.pending.CompareAndSet(true, false) && this.parent.monitorStarted.Value)
                {
                    IOException ex = new IOException("Channel was inactive for too long: " + remote);
                    this.parent.OnException(parent, ex);
                }

                return this.pending.Value;
            }
        }

        // Task that fires when the TaskRunner is signaled by the WriteCheck Timer Task.
        class AsyncWriteTask : CompositeTask
        {
            private readonly InactivityMonitor parent;
            private readonly Atomic<bool> pending = new Atomic<bool>(false);

            public AsyncWriteTask(InactivityMonitor parent)
            {
                this.parent = parent;
            }

            public bool IsPending
            {
                get { return this.pending.Value; }
                set { this.pending.Value = value; }
            }

            public bool Iterate()
            {
                Tracer.DebugFormat("InactivityMonitor[{0}] perparing for another Write Check", parent.instanceId);
                if(this.pending.CompareAndSet(true, false) && this.parent.monitorStarted.Value)
                {
                    try
                    {
                        Tracer.DebugFormat("InactivityMonitor[{0}] Write Check required sending KeepAlive.",
                                           parent.instanceId);
                        KeepAliveInfo info = new KeepAliveInfo();
                        this.parent.next.Oneway(info);
                    }
                    catch(IOException e)
                    {
                        this.parent.OnException(parent, e);
                    }
                }

                return this.pending.Value;
            }
        }
        #endregion
    }

}