*PPD-Adobe: "4.2"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1995 Adobe Systems Incorporated. 
*% All Rights Reserved. 
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*% @(#)SPARCPRINTEREC.PPD	1.16 13 Apr 1995
*% Copyright 1995 Sun Microsystems, Inc.  All Rights Reserved.

*FormatVersion: "4.2"
*FileVersion: "1.0"
*LanguageEncoding: ISOLatin1
*LanguageVersion: English
*PCFileName: "SNSPREC1.PPD"
*Product: "(SPARCprinter EC)"
*PSVersion: "(2015.009) 1"
*ModelName: "SPARCprinter EC"
*NickName: "SPARCprinter EC"

*% === Installable Options ===========
*OpenGroup: InstallableOptions/Options Installed

*OpenUI *InstalledMemory/Memory Configuration: PickOne
*DefaultInstalledMemory: None
*InstalledMemory None/Standard 20 MB RAM: ""
*InstalledMemory 36Meg/36 MB Total RAM: ""
*InstalledMemory 52Meg/52 MB Total RAM: ""
*CloseUI: *InstalledMemory

*OpenUI *Option1/Optional Hard Drive: Boolean
*DefaultOption1: False
*Option1 True/Installed: ""
*Option1 False/Not Installed: ""
*CloseUI: *Option1

*OpenUI *Option2/Optional Lower Trays: Boolean
*DefaultOption2: False
*Option2 True/Installed: ""
*Option2 False/Not Installed: ""
*CloseUI: *Option2

*CloseGroup: InstallableOptions

*% === Constraints ===================

*UIConstraints: *InstalledMemory None  *OutputMode Enhanced
*UIConstraints: *Option2 False *InputSlot Middle
*UIConstraints: *Option2 False *InputSlot Lower

*% === Device Capabilities ============

*LanguageLevel: "2"
*Protocols: BCP

*FreeVM: "3276160"
*VMOption None/Standard 20 MB RAM: "3276160"
*VMOption 36Meg/36 MB Total RAM: "3816832"
*VMOption 52Meg/52 MB Total RAM: "17587584"

*TTRasterizer: Type42
*ColorDevice: True
*DefaultColorSpace: CMYK
*VariablePaperSize: False
*AccurateScreensSupport: True
*SuggestedJobTimeout: "0"
*SuggestedWaitTimeout: "300"

*Emulators:  hpgl
*StartEmulator_hpgl: "currentfile /hpgl statusdict /emulate get exec "
*StopEmulator_hpgl: "<1B7F>0"

*FileSystem: True
*?FileSystem: "
  save false
  (%disk?%)
  { currentdevparams dup /Writeable known
    { /Writeable get {pop true} if }  {pop} ifelse
  } 10 string /IODevice resourceforall
  {(True)}{(False)} ifelse = flush
  restore
"
*End
*Throughput: "14"
*Password: "()"
*ExitServer: "
  count 0 eq
  { false } { true exch startjob } ifelse
  not
  { (WARNING: Cannot modify initial VM.) =
    (Missing or invalid password.) =
    (Please contact the author of this software.) = flush quit
  } if
"
*End
*Reset: "
  count 0 eq
  { false } { true exch startjob } ifelse
  not
  { (WARNING: Cannot reset printer.) =
    (Missing or invalid password.) =
    (Please contact the author of this software.) = flush quit
  } if
  systemdict /quit get exec
  (WARNING : Printer Reset Failed.) = flush
"
*End

*DefaultResolution: 600dpi
*Resolution 300dpi: "<</HWResolution [300 300] >> setpagedevice"
*Resolution 600dpi: "<</HWResolution [600 600] >> setpagedevice"
*?Resolution: "
  save currentpagedevice
  /HWResolution get 0 get (   ) cvs print (dpi) = flush restore"
*End

*% Halftone Information =================
*ScreenFreq: "106.0"
*ScreenAngle: "45.0"
*DefaultScreenProc: SNHalftone
*ScreenProc SNHalftone: "/DefaultHalftone /Halftone findresource"
*ScreenProc Dot: "{180 mul cos exch 180 mul cos add 2 div}"
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "
  { dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub}"
*End

*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"


*% Tray Selection ============

*OpenUI *InputSlot: PickOne
*OrderDependency: 10 AnySetup *InputSlot
*DefaultInputSlot: Paper
*InputSlot Upper: "
  mark
  {
    4 dict begin
      /MediaPosition 0 def
      /MediaType null def
      /TraySwitch false def
      /ManualFeed false def
      currentdict end setpagedevice
  } stopped cleartomark
  "
*End
*InputSlot Middle: "
  mark
  {
    4 dict begin
      /MediaPosition 1 def
      /MediaType null def
      /TraySwitch false def
      /ManualFeed false def
      currentdict end setpagedevice
  } stopped cleartomark
  "
*End
*InputSlot Lower: "
  mark
  {
    4 dict begin
      /MediaPosition 2 def
      /MediaType null def
      /TraySwitch false def
      /ManualFeed false def
      currentdict end setpagedevice
  } stopped cleartomark
  "
*End
*InputSlot Paper: "
  mark
  {
    4 dict begin
      /MediaPosition null def
      /MediaType (Paper) def
      /TraySwitch true def
      /ManualFeed false def
      currentdict end setpagedevice
  } stopped cleartomark
  "
*End
*InputSlot Transparency: "
  mark
  {
    4 dict begin
      /MediaPosition null def
      /MediaType (Transparency) def
      /TraySwitch true def
      /ManualFeed false def
      currentdict end setpagedevice
  } stopped cleartomark
  "
*End
*InputSlot ManualPaper/Manual Paper: "
  mark
  {
    4 dict begin
      /MediaPosition null def
      /MediaType (Paper) def
      /TraySwitch false def
      /ManualFeed true def
      currentdict end setpagedevice
  } stopped cleartomark
  "
*End
*InputSlot ManualTransparency/Manual Transparency: "
  mark
  {
    4 dict begin
      /MediaPosition null def
      /MediaType (Transparency) def
      /TraySwitch false def
      /ManualFeed true def
      currentdict end setpagedevice
  } stopped cleartomark
  "
*End

*?InputSlot: "
save
  currentpagedevice /MediaPosition get
  dup null eq
  { pop currentpagedevice /MediaType get
    dup null eq
    { pop (Upper) }
    { dup (Paper) eq
      { pop currentpagedevice /ManualFeed get
        { (ManualPaper) }
        { (Paper) } ifelse
      }
      {
        (Transparency) eq
        { currentpagedevice /ManualFeed get
          { (ManualTransparency) }
          { (Transparency) } ifelse
        }
        { (Unknown) } ifelse
      } ifelse
    } ifelse
  }
  {
    dup 0 eq
    { pop (Upper) }
    { dup 1 eq
      { pop (Middle) }
      { 2 eq
        { (Lower) }
        { (Unknown) } ifelse
      } ifelse
    } ifelse
  } ifelse
  = flush
restore
"
*End
*CloseUI: *InputSlot

*% Paper Handling ===================

*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize: PickOne
*OrderDependency: 20 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "2 dict dup /PageSize [612 792] put 
dup /ImagingBBox null put 
setpagedevice"
*End
*PageSize A4: "2 dict dup /PageSize [595 842] put 
dup /ImagingBBox null put 
setpagedevice"
*End
*?PageSize: "
save currentpagedevice /PageSize get aload pop 
  2 copy gt {exch} if (Unknown)
  2 dict
  dup [612 792] (Letter) put
  dup [595 842] (A4) put
  { exch aload pop 4 index sub abs 5 le exch 5 index sub abs 5 le and 
  	{ exch pop exit } { pop } ifelse
  } bind forall = flush pop pop
restore"
*End
*CloseUI: *PageSize

*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 30 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "2 dict dup /PageSize [612 792] put 
dup /ImagingBBox null put 
setpagedevice"
*End
*PageRegion A4: "2 dict dup /PageSize [595 842] put 
dup /ImagingBBox null put 
setpagedevice"
*End
*CloseUI: *PageRegion

*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "10.32 15.9 601.68 776.22"
*ImageableArea A4: "13.44 14.46 581.76 828.54"
*?ImageableArea: "
save
  /cvp { (                ) cvs print ( ) print } bind def
  /upperright {10000 mul floor 10000 div} bind def
  /lowerleft {10000 mul ceiling 10000 div} bind def
  newpath clippath pathbbox
  4 -2 roll exch 2 {lowerleft cvp} repeat
  exch 2 {upperright cvp} repeat flush
 restore
"
*End

*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension A4: "595 842"


*OpenUI *OutputOrder/Output Order: PickOne
*OrderDependency: 40 AnySetup *OutputOrder
*DefaultOutputOrder: Unknown
*OutputOrder Face-Down: "
  mark
  {
    1 dict begin
    /OutputFaceUp false def
    currentdict end setpagedevice
  } stopped cleartomark"
*End
*OutputOrder Face-Up: "
  mark
  {
    1 dict begin
    /OutputFaceUp true def
    currentdict end setpagedevice
  } stopped cleartomark"
*End
*?OutputOrder: "save
  currentpagedevice /OutputFaceUp get
  { (Face-Up) }
  { (Face-Down)  } ifelse
  = flush restore"
*End
*CloseUI: *OutputOrder

*RequiresPageRegion All: True

*% Print Quality Selection  ===================

*OpenUI *OutputMode/Print Quality: PickOne
*OrderDependency: 50 AnySetup *OutputMode
*DefaultOutputMode: Unknown
*OutputMode Fast: "
  mark
  {
    3 dict begin
      /HWResolution [300 300] def
      /PostRenderingEnhance true def
      /PostRenderingEnhanceDetails 1 dict begin
        /OutputMode (Standard) def
      currentdict end def
    currentdict end setpagedevice
  } stopped cleartomark"
*End
*OutputMode Standard: "
  mark
  {
    3 dict begin
      /HWResolution [600 600] def
      /PostRenderingEnhance true def
      /PostRenderingEnhanceDetails 1 dict begin
        /OutputMode (Standard) def
      currentdict end def
    currentdict end setpagedevice
  } stopped cleartomark"
*End
*OutputMode Enhanced: "
  mark
  {
    3 dict begin
      /HWResolution [600 600] def
      /PostRenderingEnhance true def
      /PostRenderingEnhanceDetails 1 dict begin
        /OutputMode (Enhanced) def
      currentdict end def
    currentdict end setpagedevice
  } stopped cleartomark"
*End
*?OutputMode: "save
  currentpagedevice /HWResolution get 0 get 300 eq
  { (Fast) }
  { currentpagedevice /PostRenderingEnhanceDetails get /OutputMode get } ifelse
  = flush restore"
*End
*CloseUI: *OutputMode

*% SNColor Selections  ===================

*OpenUI *SNColor/Color Correction: PickOne
*OrderDependency: 70 AnySetup *SNColor
*DefaultSNColor: Unknown
*SNColor NoAdjust/Standard Color: "mark
  { 1 dict begin
      /DeviceRenderingInfo 2 dict begin
        /Type 2 def
        /VirtualColorDevice null def
      currentdict end def
    currentdict end
    setpagedevice
  } stopped cleartomark"
*End

*SNColor VividColor/Vivid Color: " mark
  { 1 dict begin
      /DeviceRenderingInfo 2 dict begin
        /Type 2 def
        /VirtualColorDevice 2 dict begin
          /Type 3 def
          /ColorTransform /TekBlue def
        currentdict end def
      currentdict end def
    currentdict end
    setpagedevice
  } stopped cleartomark"
*End

*SNColor SimulateDisplay/Simulate Display: " mark
  { 1 dict begin
      /DeviceRenderingInfo 2 dict begin
        /Type 2 def
        /VirtualColorDevice 2 dict begin
          /Type 3 def
          /ColorTransform /TekDisplay def
        currentdict end def
      currentdict end def
    currentdict end
    setpagedevice
  } stopped cleartomark"
*End

*SNColor SWOPPress/SWOP Press: " mark
  { 1 dict begin
      /DeviceRenderingInfo 2 dict begin
        /Type 2 def
        /VirtualColorDevice 2 dict begin
          /Type 3 def
          /ColorTransform /SWOP-Coated def
        currentdict end def
      currentdict end def
    currentdict end
    setpagedevice
    } stopped cleartomark"
*End

*SNColor EuroscalePress/Euroscale Press: " mark
  { 1 dict begin
      /DeviceRenderingInfo 2 dict begin
        /Type 2 def
        /VirtualColorDevice 2 dict begin
          /Type 3 def
          /ColorTransform /Euroscale-Coated def
        currentdict end def
      currentdict end def
    currentdict end
    setpagedevice
    } stopped cleartomark"
*End

*SNColor CommercialPress/Commercial Press: " mark
  { 1 dict begin
      /DeviceRenderingInfo 2 dict begin
        /Type 2 def
        /VirtualColorDevice 2 dict begin
          /Type 3 def
          /ColorTransform /Commercial-Coated def
        currentdict end def
      currentdict end def
    currentdict end
    setpagedevice
    } stopped cleartomark"
*End

*SNColor Monochrome: " mark
  { 1 dict begin
      /DeviceRenderingInfo 2 dict begin
        /Type 2 def
        /VirtualColorDevice 2 dict begin
          /Type 1 def
          /ColorTransform /Gray def
        currentdict end def
      currentdict end def
    currentdict end
    setpagedevice
  } stopped cleartomark"
*End

*SNColor RawCMYK/Raw CMYK: " mark
  { 1 dict begin
      /DeviceRenderingInfo 2 dict begin
        /Type 2 def
        /VirtualColorDevice 2 dict begin
          /Type 1 def
          /ColorTransform /CMYK def
        currentdict end def
      currentdict end def
    currentdict end
    setpagedevice
  } stopped cleartomark"
*End

*SNColor RawRGB/Raw RGB: " mark
  { 1 dict begin
      /DeviceRenderingInfo 2 dict begin
        /Type 2 def
        /VirtualColorDevice 2 dict begin
          /Type 1 def
          /ColorTransform /RGB def
        currentdict end def
      currentdict end def
    currentdict end
    setpagedevice
  } stopped cleartomark"
*End

*?SNColor: "
save
  { currentpagedevice /DeviceRenderingInfo get
    /VirtualColorDevice get
    dup null eq
    { pop (NoAdjust) }
    { /ColorTransform get
      8 dict begin
        /TekBlue           (VividColor)      def
        /TekDisplay        (SimulateDisplay) def
        /SWOP-Coated       (SWOPPress)       def
        /Euroscale-Coated  (EuroscalePress)  def
        /Commercial-Coated (CommercialPress) def
        /Gray              (Monochrome)      def
        /CMYK              (RawCMYK)         def
        /RGB               (RawRGB)          def
      currentdict end
      exch get
    } ifelse
  } stopped
  { % error in PostScript code execution
    pop pop (Unknown)
  } if
  = flush
restore
"
*End

*CloseUI: *SNColor

*% Font Information =====================
*DefaultFont: Courier
*Font AvantGarde-Book: Standard "(001.002)" Standard ROM
*Font AvantGarde-BookOblique: Standard "(001.002)" Standard ROM
*Font AvantGarde-Demi: Standard "(001.003)" Standard ROM
*Font AvantGarde-DemiOblique: Standard "(001.003)" Standard ROM
*Font Bembo: Standard "(001.000)" Standard ROM
*Font Bembo-Italic: Standard "(001.000)" Standard ROM
*Font Bembo-Bold: Standard "(001.000)" Standard ROM
*Font Bembo-BoldItalic: Standard "(001.000)" Standard ROM
*Font Bookman-Demi: Standard "(001.003)" Standard ROM
*Font Bookman-DemiItalic: Standard "(001.003)" Standard ROM
*Font Bookman-Light: Standard "(001.003)" Standard ROM
*Font Bookman-LightItalic: Standard "(001.003)" Standard ROM
*Font Courier: Standard "(002.003)" Standard ROM
*Font Courier-Bold: Standard "(002.003)" Standard ROM
*Font Courier-BoldOblique: Standard "(002.003)" Standard ROM
*Font Courier-Oblique: Standard "(002.003)" Standard ROM
*Font GillSans: Standard "(001.000)" Standard ROM
*Font GillSans-Italic: Standard "(001.000)" Standard ROM
*Font GillSans-Bold: Standard "(001.000)" Standard ROM
*Font GillSans-BoldItalic: Standard "(001.000)" Standard ROM
*Font Helvetica: Standard "(001.006)" Standard ROM
*Font Helvetica-Bold: Standard "(001.007)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.007)" Standard ROM
*Font Helvetica-Narrow: Standard "(001.006)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(001.007)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(001.007)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(001.006)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.006)" Standard ROM
*Font LucidaSans: Standard "(001.001)" Standard ROM
*Font LucidaSans-Italic: Standard "(001.001)" Standard ROM
*Font LucidaSans-Bold: Standard "(001.002)" Standard ROM
*Font LucidaSans-BoldItalic: Standard "(001.002)" Standard ROM
*Font LucidaSans-Typewriter: Standard "(001.003)" Standard ROM
*Font LucidaSans-TypewriterBold: Standard "(001.003)" Standard ROM
*Font LucidaBright: Standard "(001.008)" Standard ROM
*Font LucidaBright-Italic: Standard "(001.008)" Standard ROM
*Font LucidaBright-Demi: Standard "(001.008)" Standard ROM
*Font LucidaBright-DemiItalic: Standard "(001.008)" Standard ROM
*Font NewCenturySchlbk-Bold: Standard "(001.008)" Standard ROM
*Font NewCenturySchlbk-BoldItalic: Standard "(001.006)" Standard ROM
*Font NewCenturySchlbk-Italic: Standard "(001.005)" Standard ROM
*Font NewCenturySchlbk-Roman: Standard "(001.006)" Standard ROM
*Font Palatino-Bold: Standard "(001.005)" Standard ROM
*Font Palatino-BoldItalic: Standard "(001.005)" Standard ROM
*Font Palatino-Italic: Standard "(001.005)" Standard ROM
*Font Palatino-Roman: Standard "(001.005)" Standard ROM
*Font Rockwell: Standard "(001.000)" Standard ROM
*Font Rockwell-Italic: Standard "(001.000)" Standard ROM
*Font Rockwell-Bold: Standard "(001.000)" Standard ROM
*Font Rockwell-BoldItalic: Standard "(001.000)" Standard ROM
*Font Symbol: Special "(001.007)" Special ROM
*Font Times-Bold: Standard "(001.007)" Standard ROM
*Font Times-BoldItalic: Standard "(001.009)" Standard ROM
*Font Times-Italic: Standard "(001.007)" Standard ROM
*Font Times-Roman: Standard "(001.007)" Standard ROM
*Font ZapfChancery-MediumItalic: Standard "(001.006)" Standard ROM
*Font ZapfDingbats: Special "(001.004)" Special ROM
*?FontQuery: "
save  
  { count 1 gt
    { exch dup 127 string cvs (/) print print (:) print
     /Font resourcestatus {pop pop (Yes)} {(No)} ifelse = 
    } { exit } ifelse
  } bind loop
  (*) = flush
restore"
*End

*?FontList: "
   save (*) {cvn ==} 128 string /Font resourceforall
   (*) = flush restore"
*End

*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"

*% Status (format: %%[ status: <one of these> ]%% )
*Status: "printer is warming up"
*Status: "idle"
*Status: "waiting"
*Status: "busy"
*Status: "PrinterError: Upper media tray empty"
*Status: "PrinterError: Middle media tray empty"
*Status: "PrinterError: Lower media tray empty"
*Status: "PrinterError: Media tray empty"
*Status: "PrinterError: Upper media tray missing"
*Status: "PrinterError: Middle media tray missing"
*Status: "PrinterError: Lower media tray missing"
*Status: "PrinterError: Media tray missing"
*Status: "PrinterError: Door open"
*Status: "PrinterError: Paper feeder open"
*Status: "PrinterError: Output tray full"
*Status: "PrinterError: Toner cartridge missing"
*Status: "PrinterError: Toner discharge tray missing"
*Status: "PrinterError: Corona wire missing"
*Status: "PrinterError: Imaging unit missing"
*Status: "PrinterError: Fuser missing"
*Status: "PrinterError: Paper feeder missing"
*Status: "PrinterError: Manual feed empty"
*Status: "PrinterError: Media jam"
*Status: "PrinterError: Waiting for paper"
*Status: "PrinterError: Waiting for transparency"
*Status: "PrinterError: Replace cyan"
*Status: "PrinterError: Replace magenta"
*Status: "PrinterError: Replace yellow"
*Status: "PrinterError: Replace black"
*Status: "PrinterError: Replace Imaging unit"
*Status: "PrinterError: Wrong media in tray"
*Status: "PrinterError: Manual feed: remove media"
*Status: "PrinterError: Print engine failure"

*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "Serial"
*Source: "LocalTalk"
*Source: "Parallel"
*Source: "Internal"
*Source: "EtherTalk"
*Source: "PrintServer"
*Source: "LPR"
*Source: "AppSocket"
*Source: "FrontPanelJobInput"
*Source: "Scanner"

*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "Upper media tray empty"
*PrinterError: "Middle media tray empty"
*PrinterError: "Lower media tray empty"
*PrinterError: "Media tray empty"
*PrinterError: "Upper media tray missing"
*PrinterError: "Middle media tray missing"
*PrinterError: "Lower media tray missing"
*PrinterError: "Media tray missing"
*PrinterError: "Door open"
*PrinterError: "Paper feeder open"
*PrinterError: "Output tray full"
*PrinterError: "Toner cartridge missing"
*PrinterError: "Toner discharge tray missing"
*PrinterError: "Corona wire missing"
*PrinterError: "Imaging unit missing"
*PrinterError: "Fuser missing"
*PrinterError: "Paper feeder missing"
*PrinterError: "Manual feed empty"
*PrinterError: "Media jam"
*PrinterError: "Waiting for paper"
*PrinterError: "Waiting for transparency"
*PrinterError: "Replace cyan"
*PrinterError: "Replace magenta"
*PrinterError: "Replace yellow"
*PrinterError: "Replace black"
*PrinterError: "Replace Imaging unit"
*PrinterError: "Wrong media in tray"
*PrinterError: "Manual feed: remove media"
*PrinterError: "Print engine failure"

*DefaultColorSep: ProcessBlack.106lpi.300dpi/106 lpi / 300 dpi

*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow

*%  For 106 lpi / 300 dpi ================================

*ColorSepScreenAngle ProcessBlack.106lpi.300dpi/106 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.106lpi.300dpi/106 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.106lpi.300dpi/106 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessMagenta.106lpi.300dpi/106 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessYellow.106lpi.300dpi/106 lpi / 300 dpi: "45.0"

*ColorSepScreenFreq ProcessBlack.106lpi.300dpi/106 lpi / 300 dpi: "106.0"
*ColorSepScreenFreq CustomColor.106lpi.300dpi/106 lpi / 300 dpi: "106.0"
*ColorSepScreenFreq ProcessCyan.106lpi.300dpi/106 lpi / 300 dpi: "106.0"
*ColorSepScreenFreq ProcessMagenta.106lpi.300dpi/106 lpi / 300 dpi: "106.0"
*ColorSepScreenFreq ProcessYellow.106lpi.300dpi/106 lpi / 300 dpi: "106.0"

*%  For 106 lpi / 600 dpi ================================

*ColorSepScreenAngle ProcessBlack.106lpi.600dpi/106 lpi / 600 dpi: "45.0"
*ColorSepScreenAngle CustomColor.106lpi.600dpi/106 lpi / 600 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.106lpi.600dpi/106 lpi / 600 dpi: "45.0"
*ColorSepScreenAngle ProcessMagenta.106lpi.600dpi/106 lpi / 600 dpi: "45.0"
*ColorSepScreenAngle ProcessYellow.106lpi.600dpi/106 lpi / 600 dpi: "45.0"

*ColorSepScreenFreq ProcessBlack.106lpi.600dpi/106 lpi / 600 dpi: "106.0"
*ColorSepScreenFreq CustomColor.106lpi.600dpi/106 lpi / 600 dpi: "106.0"
*ColorSepScreenFreq ProcessCyan.106lpi.600dpi/106 lpi / 600 dpi: "106.0"
*ColorSepScreenFreq ProcessMagenta.106lpi.600dpi/106 lpi / 600 dpi: "106.0"
*ColorSepScreenFreq ProcessYellow.106lpi.600dpi/106 lpi / 600 dpi: "106.0"

*% The byte count of this file should be exactly 022539 or 023299
*% depending on the filesystem it resides in.
*% end of PPD file for SPARCprinter EC