| /************************************************************** |
| * |
| * Licensed to the Apache Software Foundation (ASF) under one |
| * or more contributor license agreements. See the NOTICE file |
| * distributed with this work for additional information |
| * regarding copyright ownership. The ASF licenses this file |
| * to you under the Apache License, Version 2.0 (the |
| * "License"); you may not use this file except in compliance |
| * with the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, |
| * software distributed under the License is distributed on an |
| * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| * KIND, either express or implied. See the License for the |
| * specific language governing permissions and limitations |
| * under the License. |
| * |
| *************************************************************/ |
| |
| // MARKER(update_precomp.py): autogen include statement, do not remove |
| #include "precompiled_xmloff.hxx" |
| #include "unointerfacetouniqueidentifiermapper.hxx" |
| #include <com/sun/star/text/XText.hpp> |
| #include <com/sun/star/container/XNamed.hpp> |
| #include <com/sun/star/container/XEnumerationAccess.hpp> |
| #include <com/sun/star/drawing/CircleKind.hpp> |
| #include <com/sun/star/drawing/ConnectorType.hpp> |
| #include <com/sun/star/drawing/XControlShape.hpp> |
| #include <com/sun/star/drawing/PolyPolygonBezierCoords.hpp> |
| #include <com/sun/star/document/XEventsSupplier.hpp> |
| #include <com/sun/star/drawing/HomogenMatrix3.hpp> |
| #include <com/sun/star/media/ZoomLevel.hpp> |
| #include "anim.hxx" |
| #include <xmloff/shapeexport.hxx> |
| #include "sdpropls.hxx" |
| #include <tools/debug.hxx> |
| #include <tools/urlobj.hxx> |
| #include <rtl/ustrbuf.hxx> |
| #include <xmloff/xmlexp.hxx> |
| #include <xmloff/xmluconv.hxx> |
| #include "XMLImageMapExport.hxx" |
| #include "xexptran.hxx" |
| #include <tools/gen.hxx> // FRound |
| #include <xmloff/xmltoken.hxx> |
| #include <xmloff/nmspmap.hxx> |
| #include "xmloff/xmlnmspe.hxx" |
| #include <basegfx/matrix/b2dhommatrix.hxx> |
| #include <basegfx/tuple/b2dtuple.hxx> |
| #include <basegfx/matrix/b2dhommatrixtools.hxx> |
| #include <basegfx/point/b2dpoint.hxx> |
| #include <basegfx/polygon/b2dpolypolygon.hxx> |
| #include <basegfx/polygon/b2dpolypolygontools.hxx> |
| #include <basegfx/polygon/b2dpolygontools.hxx> |
| |
| using ::rtl::OUString; |
| using ::rtl::OUStringBuffer; |
| |
| using namespace ::com::sun::star; |
| using namespace ::xmloff::token; |
| |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| void XMLShapeExport::ImpExportNewTrans(const uno::Reference< beans::XPropertySet >& xPropSet, |
| sal_Int32 nFeatures, awt::Point* pRefPoint) |
| { |
| // get matrix |
| ::basegfx::B2DHomMatrix aMatrix; |
| ImpExportNewTrans_GetB2DHomMatrix(aMatrix, xPropSet); |
| |
| // decompose and correct abour pRefPoint |
| ::basegfx::B2DTuple aTRScale; |
| double fTRShear(0.0); |
| double fTRRotate(0.0); |
| ::basegfx::B2DTuple aTRTranslate; |
| ImpExportNewTrans_DecomposeAndRefPoint(aMatrix, aTRScale, fTRShear, fTRRotate, aTRTranslate, pRefPoint); |
| |
| // use features and write |
| ImpExportNewTrans_FeaturesAndWrite(aTRScale, fTRShear, fTRRotate, aTRTranslate, nFeatures); |
| } |
| |
| void XMLShapeExport::ImpExportNewTrans_GetB2DHomMatrix(::basegfx::B2DHomMatrix& rMatrix, |
| const uno::Reference< beans::XPropertySet >& xPropSet) |
| { |
| // --> OD 2004-08-09 #i28749# - Get <TransformationInHoriL2R>, if it exist |
| // and if the document is exported into the OpenOffice.org file format. |
| // This property only exists at service com::sun::star::text::Shape - the |
| // Writer UNO service for shapes. |
| // This code is needed, because the positioning attributes in the |
| // OpenOffice.org file format are given in horizontal left-to-right layout |
| // regardless the layout direction the shape is in. In the OASIS Open Office |
| // file format the positioning attributes are correctly given in the layout |
| // direction the shape is in. Thus, this code provides the conversion from |
| // the OASIS Open Office file format to the OpenOffice.org file format. |
| uno::Any aAny; |
| if ( ( GetExport().getExportFlags() & EXPORT_OASIS ) == 0 && |
| xPropSet->getPropertySetInfo()->hasPropertyByName( |
| OUString(RTL_CONSTASCII_USTRINGPARAM("TransformationInHoriL2R"))) ) |
| { |
| aAny = xPropSet->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("TransformationInHoriL2R"))); |
| } |
| else |
| { |
| aAny = xPropSet->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("Transformation"))); |
| } |
| // <-- |
| drawing::HomogenMatrix3 aMatrix; |
| aAny >>= aMatrix; |
| |
| rMatrix.set(0, 0, aMatrix.Line1.Column1); |
| rMatrix.set(0, 1, aMatrix.Line1.Column2); |
| rMatrix.set(0, 2, aMatrix.Line1.Column3); |
| rMatrix.set(1, 0, aMatrix.Line2.Column1); |
| rMatrix.set(1, 1, aMatrix.Line2.Column2); |
| rMatrix.set(1, 2, aMatrix.Line2.Column3); |
| rMatrix.set(2, 0, aMatrix.Line3.Column1); |
| rMatrix.set(2, 1, aMatrix.Line3.Column2); |
| rMatrix.set(2, 2, aMatrix.Line3.Column3); |
| } |
| |
| void XMLShapeExport::ImpExportNewTrans_DecomposeAndRefPoint(const ::basegfx::B2DHomMatrix& rMatrix, ::basegfx::B2DTuple& rTRScale, |
| double& fTRShear, double& fTRRotate, ::basegfx::B2DTuple& rTRTranslate, com::sun::star::awt::Point* pRefPoint) |
| { |
| // decompose matrix |
| rMatrix.decompose(rTRScale, rTRTranslate, fTRRotate, fTRShear); |
| |
| // correct translation about pRefPoint |
| if(pRefPoint) |
| { |
| rTRTranslate -= ::basegfx::B2DTuple(pRefPoint->X, pRefPoint->Y); |
| } |
| } |
| |
| void XMLShapeExport::ImpExportNewTrans_FeaturesAndWrite(::basegfx::B2DTuple& rTRScale, double fTRShear, |
| double fTRRotate, ::basegfx::B2DTuple& rTRTranslate, const sal_Int32 nFeatures) |
| { |
| // allways write Size (rTRScale) since this statement carries the union |
| // of the object |
| OUString aStr; |
| OUStringBuffer sStringBuffer; |
| ::basegfx::B2DTuple aTRScale(rTRScale); |
| |
| // svg: width |
| if(!(nFeatures & SEF_EXPORT_WIDTH)) |
| { |
| aTRScale.setX(1.0); |
| } |
| else |
| { |
| if( aTRScale.getX() > 0.0 ) |
| aTRScale.setX(aTRScale.getX() - 1.0); |
| else if( aTRScale.getX() < 0.0 ) |
| aTRScale.setX(aTRScale.getX() + 1.0); |
| } |
| |
| mrExport.GetMM100UnitConverter().convertMeasure(sStringBuffer, FRound(aTRScale.getX())); |
| aStr = sStringBuffer.makeStringAndClear(); |
| mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_WIDTH, aStr); |
| |
| // svg: height |
| if(!(nFeatures & SEF_EXPORT_HEIGHT)) |
| { |
| aTRScale.setY(1.0); |
| } |
| else |
| { |
| if( aTRScale.getY() > 0.0 ) |
| aTRScale.setY(aTRScale.getY() - 1.0); |
| else if( aTRScale.getY() < 0.0 ) |
| aTRScale.setY(aTRScale.getY() + 1.0); |
| } |
| |
| mrExport.GetMM100UnitConverter().convertMeasure(sStringBuffer, FRound(aTRScale.getY())); |
| aStr = sStringBuffer.makeStringAndClear(); |
| mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_HEIGHT, aStr); |
| |
| // decide if transformation is neccessary |
| sal_Bool bTransformationIsNeccessary(fTRShear != 0.0 || fTRRotate != 0.0); |
| |
| if(bTransformationIsNeccessary) |
| { |
| // write transformation, but WITHOUT scale which is exported as size above |
| SdXMLImExTransform2D aTransform; |
| |
| aTransform.AddSkewX(atan(fTRShear)); |
| |
| // #i78696# |
| // fTRRotate is mathematically correct, but due to the error |
| // we export/import it mirrored. Since the API implementation is fixed and |
| // uses the correctly oriented angle, it is necessary for compatibility to |
| // mirror the angle here to stay at the old behaviour. There is a follow-up |
| // task (#i78698#) to fix this in the next ODF FileFormat version |
| aTransform.AddRotate(-fTRRotate); |
| |
| aTransform.AddTranslate(rTRTranslate); |
| |
| // does transformation need to be exported? |
| if(aTransform.NeedsAction()) |
| mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_TRANSFORM, aTransform.GetExportString(mrExport.GetMM100UnitConverter())); |
| } |
| else |
| { |
| // no shear, no rotate; just add object position to export and we are done |
| if(nFeatures & SEF_EXPORT_X) |
| { |
| // svg: x |
| mrExport.GetMM100UnitConverter().convertMeasure(sStringBuffer, FRound(rTRTranslate.getX())); |
| aStr = sStringBuffer.makeStringAndClear(); |
| mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_X, aStr); |
| } |
| |
| if(nFeatures & SEF_EXPORT_Y) |
| { |
| // svg: y |
| mrExport.GetMM100UnitConverter().convertMeasure(sStringBuffer, FRound(rTRTranslate.getY())); |
| aStr = sStringBuffer.makeStringAndClear(); |
| mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_Y, aStr); |
| } |
| } |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| sal_Bool XMLShapeExport::ImpExportPresentationAttributes( const uno::Reference< beans::XPropertySet >& xPropSet, const rtl::OUString& rClass ) |
| { |
| sal_Bool bIsEmpty = sal_False; |
| |
| OUStringBuffer sStringBuffer; |
| |
| // write presentation class entry |
| mrExport.AddAttribute(XML_NAMESPACE_PRESENTATION, XML_CLASS, rClass); |
| |
| if( xPropSet.is() ) |
| { |
| uno::Reference< beans::XPropertySetInfo > xPropSetInfo( xPropSet->getPropertySetInfo() ); |
| |
| sal_Bool bTemp = false; |
| |
| // is empty pes shape? |
| if( xPropSetInfo.is() && xPropSetInfo->hasPropertyByName(OUString(RTL_CONSTASCII_USTRINGPARAM("IsEmptyPresentationObject")))) |
| { |
| xPropSet->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("IsEmptyPresentationObject"))) >>= bIsEmpty; |
| if( bIsEmpty ) |
| mrExport.AddAttribute(XML_NAMESPACE_PRESENTATION, XML_PLACEHOLDER, XML_TRUE); |
| } |
| |
| // is user-transformed? |
| if( xPropSetInfo.is() && xPropSetInfo->hasPropertyByName(OUString(RTL_CONSTASCII_USTRINGPARAM("IsPlaceholderDependent")))) |
| { |
| xPropSet->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("IsPlaceholderDependent"))) >>= bTemp; |
| if(!bTemp) |
| mrExport.AddAttribute(XML_NAMESPACE_PRESENTATION, XML_USER_TRANSFORMED, XML_TRUE); |
| } |
| } |
| |
| return bIsEmpty; |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| void XMLShapeExport::ImpExportText( const uno::Reference< drawing::XShape >& xShape ) |
| { |
| uno::Reference< text::XText > xText( xShape, uno::UNO_QUERY ); |
| if( xText.is() ) |
| { |
| uno::Reference< container::XEnumerationAccess > xEnumAccess( xShape, uno::UNO_QUERY ); |
| if( xEnumAccess.is() && xEnumAccess->hasElements() ) |
| mrExport.GetTextParagraphExport()->exportText( xText ); |
| } |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| #include <com/sun/star/presentation/ClickAction.hpp> |
| #include <com/sun/star/presentation/AnimationSpeed.hpp> |
| |
| namespace { |
| |
| const sal_Int32 FOUND_CLICKACTION = 0x00000001; |
| const sal_Int32 FOUND_BOOKMARK = 0x00000002; |
| const sal_Int32 FOUND_EFFECT = 0x00000004; |
| const sal_Int32 FOUND_PLAYFULL = 0x00000008; |
| const sal_Int32 FOUND_VERB = 0x00000010; |
| const sal_Int32 FOUND_SOUNDURL = 0x00000020; |
| const sal_Int32 FOUND_SPEED = 0x00000040; |
| const sal_Int32 FOUND_CLICKEVENTTYPE = 0x00000080; |
| const sal_Int32 FOUND_MACRO = 0x00000100; |
| const sal_Int32 FOUND_LIBRARY = 0x00000200; |
| const sal_Int32 FOUND_ACTIONEVENTTYPE = 0x00000400; |
| #ifdef ISSUE66550_HLINK_FOR_SHAPES |
| const sal_Int32 FOUND_URL = 0x00000800; |
| #endif |
| |
| } // namespace |
| |
| void XMLShapeExport::ImpExportEvents( const uno::Reference< drawing::XShape >& xShape ) |
| { |
| uno::Reference< document::XEventsSupplier > xEventsSupplier( xShape, uno::UNO_QUERY ); |
| if( !xEventsSupplier.is() ) |
| return; |
| |
| uno::Reference< container::XNameAccess > xEvents( xEventsSupplier->getEvents(), uno::UNO_QUERY ); |
| DBG_ASSERT( xEvents.is(), "XEventsSupplier::getEvents() returned NULL" ); |
| if( !xEvents.is() ) |
| return; |
| |
| sal_Int32 nFound = 0; |
| |
| // extract properties from "OnClick" event -------------------------------- |
| |
| OUString aClickEventType; |
| presentation::ClickAction eClickAction = presentation::ClickAction_NONE; |
| presentation::AnimationEffect eEffect = presentation::AnimationEffect_NONE; |
| presentation::AnimationSpeed eSpeed = presentation::AnimationSpeed_SLOW; |
| OUString aStrSoundURL; |
| sal_Bool bPlayFull = false; |
| sal_Int32 nVerb = 0; |
| OUString aStrMacro; |
| OUString aStrLibrary; |
| OUString aStrBookmark; |
| |
| uno::Sequence< beans::PropertyValue > aClickProperties; |
| if( xEvents->hasByName( msOnClick ) && (xEvents->getByName( msOnClick ) >>= aClickProperties) ) |
| { |
| const beans::PropertyValue* pProperty = aClickProperties.getConstArray(); |
| const beans::PropertyValue* pPropertyEnd = pProperty + aClickProperties.getLength(); |
| for( ; pProperty != pPropertyEnd; ++pProperty ) |
| { |
| if( ( ( nFound & FOUND_CLICKEVENTTYPE ) == 0 ) && pProperty->Name == msEventType ) |
| { |
| if( pProperty->Value >>= aClickEventType ) |
| nFound |= FOUND_CLICKEVENTTYPE; |
| } |
| else if( ( ( nFound & FOUND_CLICKACTION ) == 0 ) && pProperty->Name == msClickAction ) |
| { |
| if( pProperty->Value >>= eClickAction ) |
| nFound |= FOUND_CLICKACTION; |
| } |
| else if( ( ( nFound & FOUND_MACRO ) == 0 ) && ( pProperty->Name == msMacroName || pProperty->Name == msScript ) ) |
| { |
| if( pProperty->Value >>= aStrMacro ) |
| nFound |= FOUND_MACRO; |
| } |
| else if( ( ( nFound & FOUND_LIBRARY ) == 0 ) && pProperty->Name == msLibrary ) |
| { |
| if( pProperty->Value >>= aStrLibrary ) |
| nFound |= FOUND_LIBRARY; |
| } |
| else if( ( ( nFound & FOUND_EFFECT ) == 0 ) && pProperty->Name == msEffect ) |
| { |
| if( pProperty->Value >>= eEffect ) |
| nFound |= FOUND_EFFECT; |
| } |
| else if( ( ( nFound & FOUND_BOOKMARK ) == 0 ) && pProperty->Name == msBookmark ) |
| { |
| if( pProperty->Value >>= aStrBookmark ) |
| nFound |= FOUND_BOOKMARK; |
| } |
| else if( ( ( nFound & FOUND_SPEED ) == 0 ) && pProperty->Name == msSpeed ) |
| { |
| if( pProperty->Value >>= eSpeed ) |
| nFound |= FOUND_SPEED; |
| } |
| else if( ( ( nFound & FOUND_SOUNDURL ) == 0 ) && pProperty->Name == msSoundURL ) |
| { |
| if( pProperty->Value >>= aStrSoundURL ) |
| nFound |= FOUND_SOUNDURL; |
| } |
| else if( ( ( nFound & FOUND_PLAYFULL ) == 0 ) && pProperty->Name == msPlayFull ) |
| { |
| if( pProperty->Value >>= bPlayFull ) |
| nFound |= FOUND_PLAYFULL; |
| } |
| else if( ( ( nFound & FOUND_VERB ) == 0 ) && pProperty->Name == msVerb ) |
| { |
| if( pProperty->Value >>= nVerb ) |
| nFound |= FOUND_VERB; |
| } |
| } |
| } |
| |
| #ifdef ISSUE66550_HLINK_FOR_SHAPES |
| // extract properties from "OnAction" event ------------------------------- |
| |
| OUString aActionEventType; |
| OUString aHyperURL; |
| |
| uno::Sequence< beans::PropertyValue > aActionProperties; |
| if( xEvents->hasByName( msOnAction ) && (xEvents->getByName( msOnAction ) >>= aActionProperties) ) |
| { |
| const beans::PropertyValue* pProperty = aActionProperties.getConstArray(); |
| const beans::PropertyValue* pPropertyEnd = pProperty + aActionProperties.getLength(); |
| for( ; pProperty != pPropertyEnd; ++pProperty ) |
| { |
| if( ( ( nFound & FOUND_ACTIONEVENTTYPE ) == 0 ) && pProperty->Name == msEventType ) |
| { |
| if( pProperty->Value >>= aActionEventType ) |
| nFound |= FOUND_ACTIONEVENTTYPE; |
| } |
| else if( ( ( nFound & FOUND_URL ) == 0 ) && ( pProperty->Name == msURL ) ) |
| { |
| if( pProperty->Value >>= aHyperURL ) |
| nFound |= FOUND_URL; |
| } |
| } |
| } |
| #endif |
| |
| // create the XML elements |
| |
| if( aClickEventType == msPresentation ) |
| { |
| if( ((nFound & FOUND_CLICKACTION) == 0) || (eClickAction == presentation::ClickAction_NONE) ) |
| return; |
| |
| SvXMLElementExport aEventsElemt(mrExport, XML_NAMESPACE_OFFICE, XML_EVENT_LISTENERS, sal_True, sal_True); |
| |
| enum XMLTokenEnum eStrAction; |
| |
| switch( eClickAction ) |
| { |
| case presentation::ClickAction_PREVPAGE: eStrAction = XML_PREVIOUS_PAGE; break; |
| case presentation::ClickAction_NEXTPAGE: eStrAction = XML_NEXT_PAGE; break; |
| case presentation::ClickAction_FIRSTPAGE: eStrAction = XML_FIRST_PAGE; break; |
| case presentation::ClickAction_LASTPAGE: eStrAction = XML_LAST_PAGE; break; |
| case presentation::ClickAction_INVISIBLE: eStrAction = XML_HIDE; break; |
| case presentation::ClickAction_STOPPRESENTATION:eStrAction = XML_STOP; break; |
| case presentation::ClickAction_PROGRAM: eStrAction = XML_EXECUTE; break; |
| case presentation::ClickAction_BOOKMARK: eStrAction = XML_SHOW; break; |
| case presentation::ClickAction_DOCUMENT: eStrAction = XML_SHOW; break; |
| case presentation::ClickAction_MACRO: eStrAction = XML_EXECUTE_MACRO; break; |
| case presentation::ClickAction_VERB: eStrAction = XML_VERB; break; |
| case presentation::ClickAction_VANISH: eStrAction = XML_FADE_OUT; break; |
| case presentation::ClickAction_SOUND: eStrAction = XML_SOUND; break; |
| default: |
| DBG_ERROR( "unknown presentation::ClickAction found!" ); |
| eStrAction = XML_UNKNOWN; |
| } |
| |
| OUString aEventQName( |
| mrExport.GetNamespaceMap().GetQNameByKey( |
| XML_NAMESPACE_DOM, OUString( RTL_CONSTASCII_USTRINGPARAM( "click" ) ) ) ); |
| mrExport.AddAttribute( XML_NAMESPACE_SCRIPT, XML_EVENT_NAME, aEventQName ); |
| mrExport.AddAttribute( XML_NAMESPACE_PRESENTATION, XML_ACTION, eStrAction ); |
| |
| if( eClickAction == presentation::ClickAction_VANISH ) |
| { |
| if( nFound & FOUND_EFFECT ) |
| { |
| XMLEffect eKind; |
| XMLEffectDirection eDirection; |
| sal_Int16 nStartScale; |
| sal_Bool bIn; |
| |
| SdXMLImplSetEffect( eEffect, eKind, eDirection, nStartScale, bIn ); |
| |
| if( eKind != EK_none ) |
| { |
| SvXMLUnitConverter::convertEnum( msBuffer, eKind, aXML_AnimationEffect_EnumMap ); |
| mrExport.AddAttribute( XML_NAMESPACE_PRESENTATION, XML_EFFECT, msBuffer.makeStringAndClear() ); |
| } |
| |
| if( eDirection != ED_none ) |
| { |
| SvXMLUnitConverter::convertEnum( msBuffer, eDirection, aXML_AnimationDirection_EnumMap ); |
| mrExport.AddAttribute( XML_NAMESPACE_PRESENTATION, XML_DIRECTION, msBuffer.makeStringAndClear() ); |
| } |
| |
| if( nStartScale != -1 ) |
| { |
| SvXMLUnitConverter::convertPercent( msBuffer, nStartScale ); |
| mrExport.AddAttribute( XML_NAMESPACE_PRESENTATION, XML_START_SCALE, msBuffer.makeStringAndClear() ); |
| } |
| } |
| |
| if( nFound & FOUND_SPEED && eEffect != presentation::AnimationEffect_NONE ) |
| { |
| if( eSpeed != presentation::AnimationSpeed_MEDIUM ) |
| { |
| SvXMLUnitConverter::convertEnum( msBuffer, eSpeed, aXML_AnimationSpeed_EnumMap ); |
| mrExport.AddAttribute( XML_NAMESPACE_PRESENTATION, XML_SPEED, msBuffer.makeStringAndClear() ); |
| } |
| } |
| } |
| |
| if( eClickAction == presentation::ClickAction_PROGRAM || |
| eClickAction == presentation::ClickAction_BOOKMARK || |
| eClickAction == presentation::ClickAction_DOCUMENT ) |
| { |
| if( eClickAction == presentation::ClickAction_BOOKMARK ) |
| msBuffer.append( sal_Unicode('#') ); |
| |
| msBuffer.append( aStrBookmark ); |
| mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_HREF, GetExport().GetRelativeReference(msBuffer.makeStringAndClear()) ); |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE ); |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_SHOW, XML_EMBED ); |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONREQUEST ); |
| } |
| |
| if( ( nFound & FOUND_VERB ) && eClickAction == presentation::ClickAction_VERB ) |
| { |
| msBuffer.append( nVerb ); |
| mrExport.AddAttribute(XML_NAMESPACE_PRESENTATION, XML_VERB, msBuffer.makeStringAndClear()); |
| } |
| |
| SvXMLElementExport aEventElemt(mrExport, XML_NAMESPACE_PRESENTATION, XML_EVENT_LISTENER, sal_True, sal_True); |
| |
| if( eClickAction == presentation::ClickAction_VANISH || eClickAction == presentation::ClickAction_SOUND ) |
| { |
| if( ( nFound & FOUND_SOUNDURL ) && aStrSoundURL.getLength() != 0 ) |
| { |
| mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_HREF, GetExport().GetRelativeReference(aStrSoundURL) ); |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE ); |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_SHOW, XML_NEW ); |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONREQUEST ); |
| if( nFound & FOUND_PLAYFULL && bPlayFull ) |
| mrExport.AddAttribute( XML_NAMESPACE_PRESENTATION, XML_PLAY_FULL, XML_TRUE ); |
| |
| SvXMLElementExport aElem( mrExport, XML_NAMESPACE_PRESENTATION, XML_SOUND, sal_True, sal_True ); |
| } |
| } |
| } |
| else if( aClickEventType == msStarBasic ) |
| { |
| if( nFound & FOUND_MACRO ) |
| { |
| SvXMLElementExport aEventsElemt(mrExport, XML_NAMESPACE_OFFICE, XML_EVENT_LISTENERS, sal_True, sal_True); |
| |
| mrExport.AddAttribute( XML_NAMESPACE_SCRIPT, XML_LANGUAGE, |
| mrExport.GetNamespaceMap().GetQNameByKey( |
| XML_NAMESPACE_OOO, |
| OUString( RTL_CONSTASCII_USTRINGPARAM( |
| "starbasic" ) ) ) ); |
| OUString aEventQName( |
| mrExport.GetNamespaceMap().GetQNameByKey( |
| XML_NAMESPACE_DOM, OUString( RTL_CONSTASCII_USTRINGPARAM( "click" ) ) ) ); |
| mrExport.AddAttribute( XML_NAMESPACE_SCRIPT, XML_EVENT_NAME, aEventQName ); |
| |
| if( nFound & FOUND_LIBRARY ) |
| { |
| OUString sLocation( GetXMLToken( |
| (aStrLibrary.equalsIgnoreAsciiCaseAscii("StarOffice") || |
| aStrLibrary.equalsIgnoreAsciiCaseAscii("application") ) ? XML_APPLICATION |
| : XML_DOCUMENT ) ); |
| OUStringBuffer sTmp( sLocation.getLength() + aStrMacro.getLength() + 1 ); |
| sTmp = sLocation; |
| sTmp.append( sal_Unicode( ':' ) ); |
| sTmp.append( aStrMacro ); |
| mrExport.AddAttribute(XML_NAMESPACE_SCRIPT, XML_MACRO_NAME, |
| sTmp.makeStringAndClear()); |
| } |
| else |
| { |
| mrExport.AddAttribute( XML_NAMESPACE_SCRIPT, XML_MACRO_NAME, aStrMacro ); |
| } |
| |
| SvXMLElementExport aEventElemt(mrExport, XML_NAMESPACE_SCRIPT, XML_EVENT_LISTENER, sal_True, sal_True); |
| } |
| } |
| #ifdef ISSUE66550_HLINK_FOR_SHAPES |
| else if( aClickEventType == msScript || aActionEventType == msAction ) |
| { |
| if( nFound & ( FOUND_MACRO | FOUND_URL ) ) |
| #else |
| else if( aClickEventType == msScript ) |
| { |
| if( nFound & FOUND_MACRO ) |
| #endif |
| { |
| SvXMLElementExport aEventsElemt(mrExport, XML_NAMESPACE_OFFICE, XML_EVENT_LISTENERS, sal_True, sal_True); |
| if ( nFound & FOUND_MACRO ) |
| { |
| mrExport.AddAttribute( XML_NAMESPACE_SCRIPT, XML_LANGUAGE, mrExport.GetNamespaceMap().GetQNameByKey( |
| XML_NAMESPACE_OOO, GetXMLToken(XML_SCRIPT) ) ); |
| OUString aEventQName( |
| mrExport.GetNamespaceMap().GetQNameByKey( |
| XML_NAMESPACE_DOM, OUString( RTL_CONSTASCII_USTRINGPARAM( "click" ) ) ) ); |
| mrExport.AddAttribute( XML_NAMESPACE_SCRIPT, XML_EVENT_NAME, aEventQName ); |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_HREF, aStrMacro ); |
| |
| SvXMLElementExport aEventElemt(mrExport, XML_NAMESPACE_SCRIPT, XML_EVENT_LISTENER, sal_True, sal_True); |
| } |
| #ifdef ISSUE66550_HLINK_FOR_SHAPES |
| if ( nFound & FOUND_URL ) |
| { |
| OUString aEventQName( |
| mrExport.GetNamespaceMap().GetQNameByKey( |
| XML_NAMESPACE_DOM, OUString( RTL_CONSTASCII_USTRINGPARAM( "action" ) ) ) ); |
| mrExport.AddAttribute( XML_NAMESPACE_SCRIPT, XML_EVENT_NAME, aEventQName ); |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_HREF, aHyperURL ); |
| |
| SvXMLElementExport aEventElemt(mrExport, XML_NAMESPACE_PRESENTATION, XML_EVENT_LISTENER, sal_True, sal_True); |
| } |
| #endif |
| } |
| } |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| /** #i68101# export shape Title and Description */ |
| void XMLShapeExport::ImpExportDescription( const uno::Reference< drawing::XShape >& xShape ) |
| { |
| try |
| { |
| OUString aTitle; |
| OUString aDescription; |
| |
| uno::Reference< beans::XPropertySet > xProps( xShape, uno::UNO_QUERY_THROW ); |
| xProps->getPropertyValue( OUString::createFromAscii( "Title" ) ) >>= aTitle; |
| xProps->getPropertyValue( OUString::createFromAscii( "Description" ) ) >>= aDescription; |
| |
| if(aTitle.getLength()) |
| { |
| SvXMLElementExport aEventElemt(mrExport, XML_NAMESPACE_SVG, XML_TITLE, sal_True, sal_False); |
| mrExport.Characters( aTitle ); |
| } |
| |
| if(aDescription.getLength()) |
| { |
| SvXMLElementExport aEventElemt(mrExport, XML_NAMESPACE_SVG, XML_DESC, sal_True, sal_False ); |
| mrExport.Characters( aDescription ); |
| } |
| } |
| catch( uno::Exception& ) |
| { |
| DBG_ERROR( "could not export Title and/or Description for shape!" ); |
| } |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| void XMLShapeExport::ImpExportGroupShape( const uno::Reference< drawing::XShape >& xShape, XmlShapeType, sal_Int32 nFeatures, awt::Point* pRefPoint) |
| { |
| uno::Reference< drawing::XShapes > xShapes(xShape, uno::UNO_QUERY); |
| if(xShapes.is() && xShapes->getCount()) |
| { |
| // write group shape |
| sal_Bool bCreateNewline( (nFeatures & SEF_EXPORT_NO_WS) == 0 ); // #86116#/#92210# |
| SvXMLElementExport aPGR(mrExport, XML_NAMESPACE_DRAW, XML_G, bCreateNewline, sal_True); |
| |
| ImpExportDescription( xShape ); // #i68101# |
| ImpExportEvents( xShape ); |
| ImpExportGluePoints( xShape ); |
| |
| // #89764# if export of position is supressed for group shape, |
| // positions of contained objects should be written relative to |
| // the upper left edge of the group. |
| awt::Point aUpperLeft; |
| |
| if(!(nFeatures & SEF_EXPORT_POSITION)) |
| { |
| nFeatures |= SEF_EXPORT_POSITION; |
| aUpperLeft = xShape->getPosition(); |
| pRefPoint = &aUpperLeft; |
| } |
| |
| // write members |
| exportShapes( xShapes, nFeatures, pRefPoint ); |
| } |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| void XMLShapeExport::ImpExportTextBoxShape( |
| const uno::Reference< drawing::XShape >& xShape, |
| XmlShapeType eShapeType, sal_Int32 nFeatures, awt::Point* pRefPoint) |
| { |
| const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY); |
| if(xPropSet.is()) |
| { |
| uno::Reference< beans::XPropertySetInfo > xPropSetInfo( xPropSet->getPropertySetInfo() ); |
| |
| // presentation attribute (if presentation) |
| sal_Bool bIsPresShape(sal_False); |
| sal_Bool bIsEmptyPresObj(sal_False); |
| OUString aStr; |
| |
| switch(eShapeType) |
| { |
| case XmlShapeTypePresSubtitleShape: |
| { |
| aStr = GetXMLToken(XML_PRESENTATION_SUBTITLE); |
| bIsPresShape = sal_True; |
| break; |
| } |
| case XmlShapeTypePresTitleTextShape: |
| { |
| aStr = GetXMLToken(XML_PRESENTATION_TITLE); |
| bIsPresShape = sal_True; |
| break; |
| } |
| case XmlShapeTypePresOutlinerShape: |
| { |
| aStr = GetXMLToken(XML_PRESENTATION_OUTLINE); |
| bIsPresShape = sal_True; |
| break; |
| } |
| case XmlShapeTypePresNotesShape: |
| { |
| aStr = GetXMLToken(XML_PRESENTATION_NOTES); |
| bIsPresShape = sal_True; |
| break; |
| } |
| case XmlShapeTypePresHeaderShape: |
| { |
| aStr = GetXMLToken(XML_HEADER); |
| bIsPresShape = sal_True; |
| break; |
| } |
| case XmlShapeTypePresFooterShape: |
| { |
| aStr = GetXMLToken(XML_FOOTER); |
| bIsPresShape = sal_True; |
| break; |
| } |
| case XmlShapeTypePresSlideNumberShape: |
| { |
| aStr = GetXMLToken(XML_PAGE_NUMBER); |
| bIsPresShape = sal_True; |
| break; |
| } |
| case XmlShapeTypePresDateTimeShape: |
| { |
| aStr = GetXMLToken(XML_DATE_TIME); |
| bIsPresShape = sal_True; |
| break; |
| } |
| default: |
| break; |
| } |
| |
| // Transformation |
| ImpExportNewTrans(xPropSet, nFeatures, pRefPoint); |
| |
| if(bIsPresShape) |
| bIsEmptyPresObj = ImpExportPresentationAttributes( xPropSet, aStr ); |
| |
| |
| sal_Bool bCreateNewline( (nFeatures & SEF_EXPORT_NO_WS) == 0 ); // #86116#/#92210# |
| SvXMLElementExport aElem( mrExport, XML_NAMESPACE_DRAW, |
| XML_FRAME, bCreateNewline, sal_True ); |
| |
| // evtl. corner radius? |
| sal_Int32 nCornerRadius(0L); |
| xPropSet->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("CornerRadius"))) >>= nCornerRadius; |
| if(nCornerRadius) |
| { |
| OUStringBuffer sStringBuffer; |
| mrExport.GetMM100UnitConverter().convertMeasure(sStringBuffer, nCornerRadius); |
| mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_CORNER_RADIUS, sStringBuffer.makeStringAndClear()); |
| } |
| |
| { |
| // write text-box |
| SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DRAW, XML_TEXT_BOX, sal_True, sal_True); |
| if(!bIsEmptyPresObj) |
| ImpExportText( xShape ); |
| } |
| |
| ImpExportDescription( xShape ); // #i68101# |
| ImpExportEvents( xShape ); |
| ImpExportGluePoints( xShape ); |
| } |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| void XMLShapeExport::ImpExportRectangleShape( |
| const uno::Reference< drawing::XShape >& xShape, |
| XmlShapeType, sal_Int32 nFeatures, com::sun::star::awt::Point* pRefPoint) |
| { |
| const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY); |
| if(xPropSet.is()) |
| { |
| // Transformation |
| ImpExportNewTrans(xPropSet, nFeatures, pRefPoint); |
| |
| // evtl. corner radius? |
| sal_Int32 nCornerRadius(0L); |
| xPropSet->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("CornerRadius"))) >>= nCornerRadius; |
| if(nCornerRadius) |
| { |
| OUStringBuffer sStringBuffer; |
| mrExport.GetMM100UnitConverter().convertMeasure(sStringBuffer, nCornerRadius); |
| mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_CORNER_RADIUS, sStringBuffer.makeStringAndClear()); |
| } |
| |
| // write rectangle |
| sal_Bool bCreateNewline( (nFeatures & SEF_EXPORT_NO_WS) == 0 ); // #86116#/#92210# |
| SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DRAW, XML_RECT, bCreateNewline, sal_True); |
| |
| ImpExportDescription( xShape ); // #i68101# |
| ImpExportEvents( xShape ); |
| ImpExportGluePoints( xShape ); |
| ImpExportText( xShape ); |
| } |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| void XMLShapeExport::ImpExportLineShape( |
| const uno::Reference< drawing::XShape >& xShape, |
| XmlShapeType, sal_Int32 nFeatures, awt::Point* pRefPoint) |
| { |
| const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY); |
| if(xPropSet.is()) |
| { |
| OUString aStr; |
| OUStringBuffer sStringBuffer; |
| awt::Point aStart(0,0); |
| awt::Point aEnd(1,1); |
| |
| // #85920# use 'Geometry' to get the points of the line |
| // since this slot take anchor pos into account. |
| |
| // get matrix |
| ::basegfx::B2DHomMatrix aMatrix; |
| ImpExportNewTrans_GetB2DHomMatrix(aMatrix, xPropSet); |
| |
| // decompose and correct about pRefPoint |
| ::basegfx::B2DTuple aTRScale; |
| double fTRShear(0.0); |
| double fTRRotate(0.0); |
| ::basegfx::B2DTuple aTRTranslate; |
| ImpExportNewTrans_DecomposeAndRefPoint(aMatrix, aTRScale, fTRShear, fTRRotate, aTRTranslate, pRefPoint); |
| |
| // create base position |
| awt::Point aBasePosition(FRound(aTRTranslate.getX()), FRound(aTRTranslate.getY())); |
| |
| // get the two points |
| uno::Any aAny(xPropSet->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("Geometry")))); |
| drawing::PointSequenceSequence* pSourcePolyPolygon = (drawing::PointSequenceSequence*)aAny.getValue(); |
| |
| if(pSourcePolyPolygon) |
| { |
| drawing::PointSequence* pOuterSequence = pSourcePolyPolygon->getArray(); |
| if(pOuterSequence) |
| { |
| drawing::PointSequence* pInnerSequence = pOuterSequence++; |
| if(pInnerSequence) |
| { |
| awt::Point* pArray = pInnerSequence->getArray(); |
| if(pArray) |
| { |
| if(pInnerSequence->getLength() > 0) |
| { |
| aStart = awt::Point( |
| pArray->X + aBasePosition.X, |
| pArray->Y + aBasePosition.Y); |
| pArray++; |
| } |
| |
| if(pInnerSequence->getLength() > 1) |
| { |
| aEnd = awt::Point( |
| pArray->X + aBasePosition.X, |
| pArray->Y + aBasePosition.Y); |
| } |
| } |
| } |
| } |
| } |
| |
| if( nFeatures & SEF_EXPORT_X ) |
| { |
| // svg: x1 |
| mrExport.GetMM100UnitConverter().convertMeasure(sStringBuffer, aStart.X); |
| aStr = sStringBuffer.makeStringAndClear(); |
| mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_X1, aStr); |
| } |
| else |
| { |
| aEnd.X -= aStart.X; |
| } |
| |
| if( nFeatures & SEF_EXPORT_Y ) |
| { |
| // svg: y1 |
| mrExport.GetMM100UnitConverter().convertMeasure(sStringBuffer, aStart.Y); |
| aStr = sStringBuffer.makeStringAndClear(); |
| mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_Y1, aStr); |
| } |
| else |
| { |
| aEnd.Y -= aStart.Y; |
| } |
| |
| // svg: x2 |
| mrExport.GetMM100UnitConverter().convertMeasure(sStringBuffer, aEnd.X); |
| aStr = sStringBuffer.makeStringAndClear(); |
| mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_X2, aStr); |
| |
| // svg: y2 |
| mrExport.GetMM100UnitConverter().convertMeasure(sStringBuffer, aEnd.Y); |
| aStr = sStringBuffer.makeStringAndClear(); |
| mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_Y2, aStr); |
| |
| // write line |
| sal_Bool bCreateNewline( (nFeatures & SEF_EXPORT_NO_WS) == 0 ); // #86116#/#92210# |
| SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DRAW, XML_LINE, bCreateNewline, sal_True); |
| |
| ImpExportDescription( xShape ); // #i68101# |
| ImpExportEvents( xShape ); |
| ImpExportGluePoints( xShape ); |
| ImpExportText( xShape ); |
| } |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| void XMLShapeExport::ImpExportEllipseShape( |
| const uno::Reference< drawing::XShape >& xShape, |
| XmlShapeType, sal_Int32 nFeatures, awt::Point* pRefPoint) |
| { |
| const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY); |
| if(xPropSet.is()) |
| { |
| // get size to decide between Circle and Ellipse |
| awt::Size aSize = xShape->getSize(); |
| sal_Int32 nRx((aSize.Width + 1) / 2); |
| sal_Int32 nRy((aSize.Height + 1) / 2); |
| sal_Bool bCircle(nRx == nRy); |
| |
| // Transformation |
| ImpExportNewTrans(xPropSet, nFeatures, pRefPoint); |
| |
| drawing::CircleKind eKind = drawing::CircleKind_FULL; |
| xPropSet->getPropertyValue( OUString(RTL_CONSTASCII_USTRINGPARAM("CircleKind")) ) >>= eKind; |
| if( eKind != drawing::CircleKind_FULL ) |
| { |
| OUStringBuffer sStringBuffer; |
| sal_Int32 nStartAngle = 0; |
| sal_Int32 nEndAngle = 0; |
| xPropSet->getPropertyValue( OUString(RTL_CONSTASCII_USTRINGPARAM("CircleStartAngle")) ) >>= nStartAngle; |
| xPropSet->getPropertyValue( OUString(RTL_CONSTASCII_USTRINGPARAM("CircleEndAngle")) ) >>= nEndAngle; |
| |
| const double dStartAngle = nStartAngle / 100.0; |
| const double dEndAngle = nEndAngle / 100.0; |
| |
| // export circle kind |
| SvXMLUnitConverter::convertEnum( sStringBuffer, (sal_uInt16)eKind, aXML_CircleKind_EnumMap ); |
| mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_KIND, sStringBuffer.makeStringAndClear() ); |
| |
| // export start angle |
| SvXMLUnitConverter::convertDouble( sStringBuffer, dStartAngle ); |
| mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_START_ANGLE, sStringBuffer.makeStringAndClear() ); |
| |
| // export end angle |
| SvXMLUnitConverter::convertDouble( sStringBuffer, dEndAngle ); |
| mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_END_ANGLE, sStringBuffer.makeStringAndClear() ); |
| } |
| |
| sal_Bool bCreateNewline( (nFeatures & SEF_EXPORT_NO_WS) == 0 ); // #86116#/#92210# |
| |
| // prepare name (with most used) |
| enum ::xmloff::token::XMLTokenEnum eName(XML_CIRCLE); |
| |
| if(bCircle) |
| { |
| // name already set |
| } |
| else |
| { |
| // set name |
| eName = XML_ELLIPSE; |
| } |
| |
| // write ellipse or circle |
| SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DRAW, eName, bCreateNewline, sal_True); |
| |
| ImpExportDescription( xShape ); // #i68101# |
| ImpExportEvents( xShape ); |
| ImpExportGluePoints( xShape ); |
| ImpExportText( xShape ); |
| } |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| void XMLShapeExport::ImpExportPolygonShape( |
| const uno::Reference< drawing::XShape >& xShape, |
| XmlShapeType eShapeType, sal_Int32 nFeatures, awt::Point* pRefPoint) |
| { |
| const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY); |
| if(xPropSet.is()) |
| { |
| sal_Bool bBezier(eShapeType == XmlShapeTypeDrawClosedBezierShape |
| || eShapeType == XmlShapeTypeDrawOpenBezierShape); |
| |
| // get matrix |
| ::basegfx::B2DHomMatrix aMatrix; |
| ImpExportNewTrans_GetB2DHomMatrix(aMatrix, xPropSet); |
| |
| // decompose and correct abour pRefPoint |
| ::basegfx::B2DTuple aTRScale; |
| double fTRShear(0.0); |
| double fTRRotate(0.0); |
| ::basegfx::B2DTuple aTRTranslate; |
| ImpExportNewTrans_DecomposeAndRefPoint(aMatrix, aTRScale, fTRShear, fTRRotate, aTRTranslate, pRefPoint); |
| |
| // use features and write |
| ImpExportNewTrans_FeaturesAndWrite(aTRScale, fTRShear, fTRRotate, aTRTranslate, nFeatures); |
| |
| // create and export ViewBox |
| awt::Point aPoint(0, 0); |
| awt::Size aSize(FRound(aTRScale.getX()), FRound(aTRScale.getY())); |
| SdXMLImExViewBox aViewBox(0, 0, aSize.Width, aSize.Height); |
| mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_VIEWBOX, aViewBox.GetExportString()); |
| |
| sal_Bool bCreateNewline( (nFeatures & SEF_EXPORT_NO_WS) == 0 ); // #86116#/#92210# |
| |
| // prepare name (with most used) |
| enum ::xmloff::token::XMLTokenEnum eName(XML_PATH); |
| |
| if(bBezier) |
| { |
| // get PolygonBezier |
| uno::Any aAny( xPropSet->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("Geometry"))) ); |
| const basegfx::B2DPolyPolygon aPolyPolygon( |
| basegfx::tools::UnoPolyPolygonBezierCoordsToB2DPolyPolygon(*(drawing::PolyPolygonBezierCoords*)aAny.getValue())); |
| |
| if(aPolyPolygon.count()) |
| { |
| // complex polygon shape, write as svg:d |
| const ::rtl::OUString aPolygonString( |
| basegfx::tools::exportToSvgD( |
| aPolyPolygon, |
| true, // bUseRelativeCoordinates |
| false, // bDetectQuadraticBeziers: not used in old, but maybe activated now |
| true)); // bHandleRelativeNextPointCompatible |
| |
| // write point array |
| mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_D, aPolygonString); |
| } |
| } |
| else |
| { |
| // get non-bezier polygon |
| uno::Any aAny( xPropSet->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("Geometry"))) ); |
| const basegfx::B2DPolyPolygon aPolyPolygon( |
| basegfx::tools::UnoPointSequenceSequenceToB2DPolyPolygon(*(drawing::PointSequenceSequence*)aAny.getValue())); |
| |
| if(!aPolyPolygon.areControlPointsUsed() && 1 == aPolyPolygon.count()) |
| { |
| // simple polygon shape, can be written as svg:points sequence |
| const basegfx::B2DPolygon aPolygon(aPolyPolygon.getB2DPolygon(0)); |
| const ::rtl::OUString aPointString(basegfx::tools::exportToSvgPoints(aPolygon)); |
| |
| // write point array |
| mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_POINTS, aPointString); |
| |
| // set name |
| eName = aPolygon.isClosed() ? XML_POLYGON : XML_POLYLINE; |
| } |
| else |
| { |
| // complex polygon shape, write as svg:d |
| const ::rtl::OUString aPolygonString( |
| basegfx::tools::exportToSvgD( |
| aPolyPolygon, |
| true, // bUseRelativeCoordinates |
| false, // bDetectQuadraticBeziers: not used in old, but maybe activated now |
| true)); // bHandleRelativeNextPointCompatible |
| |
| // write point array |
| mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_D, aPolygonString); |
| } |
| } |
| |
| // write object, but after attributes are added since this call will |
| // consume all of these added attributes and the destructor will close the |
| // scope. Also before text is added; this may add sub-scopes as needed |
| SvXMLElementExport aOBJ( |
| mrExport, |
| XML_NAMESPACE_DRAW, |
| eName, |
| bCreateNewline, |
| sal_True); |
| |
| ImpExportDescription( xShape ); // #i68101# |
| ImpExportEvents( xShape ); |
| ImpExportGluePoints( xShape ); |
| ImpExportText( xShape ); |
| } |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| void XMLShapeExport::ImpExportGraphicObjectShape( |
| const uno::Reference< drawing::XShape >& xShape, |
| XmlShapeType eShapeType, |
| sal_Int32 nFeatures, |
| awt::Point* pRefPoint ) |
| { |
| const uno::Reference< beans::XPropertySet > xPropSet( xShape, uno::UNO_QUERY ); |
| if ( xPropSet.is() ) |
| { |
| sal_Bool bIsEmptyPresObj = sal_False; |
| uno::Reference< beans::XPropertySetInfo > xPropSetInfo( xPropSet->getPropertySetInfo() ); |
| |
| // Transformation |
| ImpExportNewTrans( xPropSet, nFeatures, pRefPoint ); |
| |
| OUString sImageURL; |
| |
| if ( eShapeType == XmlShapeTypePresGraphicObjectShape ) |
| bIsEmptyPresObj = ImpExportPresentationAttributes( xPropSet, GetXMLToken( XML_PRESENTATION_GRAPHIC ) ); |
| |
| sal_Bool bCreateNewline( ( nFeatures & SEF_EXPORT_NO_WS ) == 0 ); // #86116#/#92210# |
| SvXMLElementExport aElem( mrExport, XML_NAMESPACE_DRAW, XML_FRAME, bCreateNewline, sal_True ); |
| |
| const bool bSaveBackwardsCompatible = ( mrExport.getExportFlags() & EXPORT_SAVEBACKWARDCOMPATIBLE ); |
| |
| if ( !bIsEmptyPresObj || bSaveBackwardsCompatible ) |
| { |
| if ( !bIsEmptyPresObj ) |
| { |
| OUString aReplacementUrl; |
| xPropSet->getPropertyValue( OUString(RTL_CONSTASCII_USTRINGPARAM("ReplacementGraphicURL"))) >>= aReplacementUrl; |
| |
| // If there is no url, then then graphic is empty |
| if ( aReplacementUrl.getLength() ) |
| { |
| const OUString aStr = mrExport.AddEmbeddedGraphicObject(aReplacementUrl); |
| |
| if(aStr.getLength()) |
| { |
| mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_HREF, aStr); |
| mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE ); |
| mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_SHOW, XML_EMBED ); |
| mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONLOAD ); |
| |
| // xlink:href for replacement, only written for Svg content |
| SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DRAW, XML_IMAGE, sal_True, sal_True); |
| |
| // optional office:binary-data |
| mrExport.AddEmbeddedGraphicObjectAsBase64(aReplacementUrl); |
| } |
| } |
| |
| OUString aStreamURL; |
| xPropSet->getPropertyValue( OUString( RTL_CONSTASCII_USTRINGPARAM( "GraphicStreamURL" ) ) ) >>= aStreamURL; |
| xPropSet->getPropertyValue( OUString( RTL_CONSTASCII_USTRINGPARAM( "GraphicURL" ) ) ) >>= sImageURL; |
| |
| OUString aResolveURL( sImageURL ); |
| const rtl::OUString sPackageURL( RTL_CONSTASCII_USTRINGPARAM( "vnd.sun.star.Package:" ) ); |
| |
| // sj: trying to preserve the filename for embedded images which already have its stream inside the package |
| bool bIsEmbeddedImageWithExistingStreamInPackage = false; |
| if ( aStreamURL.match( sPackageURL, 0 ) ) |
| { |
| bIsEmbeddedImageWithExistingStreamInPackage = true; |
| |
| rtl::OUString sRequestedName( aStreamURL.copy( sPackageURL.getLength(), aStreamURL.getLength() - sPackageURL.getLength() ) ); |
| sal_Int32 nLastIndex = sRequestedName.lastIndexOf( '/' ) + 1; |
| if ( ( nLastIndex > 0 ) && ( nLastIndex < sRequestedName.getLength() ) ) |
| sRequestedName = sRequestedName.copy( nLastIndex, sRequestedName.getLength() - nLastIndex ); |
| nLastIndex = sRequestedName.lastIndexOf( '.' ); |
| if ( nLastIndex >= 0 ) |
| sRequestedName = sRequestedName.copy( 0, nLastIndex ); |
| if ( sRequestedName.getLength() ) |
| { |
| aResolveURL = aResolveURL.concat( OUString( RTL_CONSTASCII_USTRINGPARAM( "?requestedName=" ) ) ); |
| aResolveURL = aResolveURL.concat( sRequestedName ); |
| } |
| } |
| |
| const OUString aStr = mrExport.AddEmbeddedGraphicObject( aResolveURL ); |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_HREF, aStr ); |
| |
| if ( !aStr.isEmpty() ) |
| { |
| // apply possible changed stream URL to embedded image object |
| if ( bIsEmbeddedImageWithExistingStreamInPackage ) |
| { |
| aStreamURL = sPackageURL; |
| if ( aStr[0] == '#' ) |
| { |
| aStreamURL = aStreamURL.concat( aStr.copy( 1, aStr.getLength() - 1 ) ); |
| } |
| else |
| { |
| aStreamURL = aStreamURL.concat( aStr ); |
| } |
| |
| uno::Any aAny; |
| aAny <<= aStreamURL; |
| xPropSet->setPropertyValue( OUString( RTL_CONSTASCII_USTRINGPARAM( "GraphicStreamURL" ) ), aAny ); |
| } |
| |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE ); |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_SHOW, XML_EMBED ); |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONLOAD ); |
| } |
| } |
| else |
| { |
| OUString aStr; |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_HREF, aStr ); |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE ); |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_SHOW, XML_EMBED ); |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONLOAD ); |
| } |
| |
| { |
| SvXMLElementExport aOBJ( mrExport, XML_NAMESPACE_DRAW, XML_IMAGE, sal_True, sal_True ); |
| |
| if ( sImageURL.getLength() ) |
| { |
| // optional office:binary-data |
| mrExport.AddEmbeddedGraphicObjectAsBase64( sImageURL ); |
| } |
| if ( !bIsEmptyPresObj ) |
| ImpExportText( xShape ); |
| } |
| } |
| |
| ImpExportEvents( xShape ); |
| ImpExportGluePoints( xShape ); |
| |
| // image map |
| GetExport().GetImageMapExport().Export( xPropSet ); |
| ImpExportDescription( xShape ); // #i68101# |
| } |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| void XMLShapeExport::ImpExportChartShape( |
| const uno::Reference< drawing::XShape >& xShape, |
| XmlShapeType eShapeType, sal_Int32 nFeatures, awt::Point* pRefPoint, |
| SvXMLAttributeList* pAttrList ) |
| { |
| ImpExportOLE2Shape( xShape, eShapeType, nFeatures, pRefPoint, pAttrList ); |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| void XMLShapeExport::ImpExportControlShape( |
| const uno::Reference< drawing::XShape >& xShape, |
| XmlShapeType, sal_Int32 nFeatures, awt::Point* pRefPoint) |
| { |
| const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY); |
| if(xPropSet.is()) |
| { |
| // Transformation |
| ImpExportNewTrans(xPropSet, nFeatures, pRefPoint); |
| } |
| |
| uno::Reference< drawing::XControlShape > xControl( xShape, uno::UNO_QUERY ); |
| DBG_ASSERT( xControl.is(), "Control shape is not supporting XControlShape" ); |
| if( xControl.is() ) |
| { |
| uno::Reference< beans::XPropertySet > xControlModel( xControl->getControl(), uno::UNO_QUERY ); |
| DBG_ASSERT( xControlModel.is(), "Control shape has not XControlModel" ); |
| if( xControlModel.is() ) |
| { |
| mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_CONTROL, mrExport.GetFormExport()->getControlId( xControlModel ) ); |
| } |
| } |
| |
| sal_Bool bCreateNewline( (nFeatures & SEF_EXPORT_NO_WS) == 0 ); // #86116#/#92210# |
| SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DRAW, XML_CONTROL, bCreateNewline, sal_True); |
| |
| ImpExportDescription( xShape ); // #i68101# |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| void XMLShapeExport::ImpExportConnectorShape( |
| const uno::Reference< drawing::XShape >& xShape, |
| XmlShapeType, sal_Int32 nFeatures /* = SEF_DEFAULT */, awt::Point* pRefPoint /* = NULL */) |
| { |
| uno::Reference< beans::XPropertySet > xProps( xShape, uno::UNO_QUERY ); |
| |
| OUString aStr; |
| OUStringBuffer sStringBuffer; |
| |
| // export connection kind |
| drawing::ConnectorType eType = drawing::ConnectorType_STANDARD; |
| uno::Any aAny = xProps->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("EdgeKind"))); |
| aAny >>= eType; |
| |
| if( eType != drawing::ConnectorType_STANDARD ) |
| { |
| SvXMLUnitConverter::convertEnum( sStringBuffer, (sal_uInt16)eType, aXML_ConnectionKind_EnumMap ); |
| aStr = sStringBuffer.makeStringAndClear(); |
| mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_TYPE, aStr); |
| } |
| |
| // export line skew |
| sal_Int32 nDelta1 = 0, nDelta2 = 0, nDelta3 = 0; |
| |
| aAny = xProps->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("EdgeLine1Delta"))); |
| aAny >>= nDelta1; |
| aAny = xProps->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("EdgeLine2Delta"))); |
| aAny >>= nDelta2; |
| aAny = xProps->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("EdgeLine3Delta"))); |
| aAny >>= nDelta3; |
| |
| if( nDelta1 != 0 || nDelta2 != 0 || nDelta3 != 0 ) |
| { |
| mrExport.GetMM100UnitConverter().convertMeasure(sStringBuffer, nDelta1); |
| if( nDelta2 != 0 || nDelta3 != 0 ) |
| { |
| const char aSpace = ' '; |
| sStringBuffer.appendAscii( &aSpace, 1 ); |
| mrExport.GetMM100UnitConverter().convertMeasure(sStringBuffer, nDelta2); |
| if( nDelta3 != 0 ) |
| { |
| sStringBuffer.appendAscii( &aSpace, 1 ); |
| mrExport.GetMM100UnitConverter().convertMeasure(sStringBuffer, nDelta3); |
| } |
| } |
| |
| aStr = sStringBuffer.makeStringAndClear(); |
| mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_LINE_SKEW, aStr); |
| } |
| |
| // export start and end point |
| awt::Point aStart(0,0); |
| awt::Point aEnd(1,1); |
| |
| // --> OD 2004-08-09 #i36248# - Get <StartPositionInHoriL2R> and |
| // <EndPositionInHoriL2R>, if they exist and if the document is exported |
| // into the OpenOffice.org file format. |
| // These properties only exist at service com::sun::star::text::Shape - the |
| // Writer UNO service for shapes. |
| // This code is needed, because the positioning attributes in the |
| // OpenOffice.org file format are given in horizontal left-to-right layout |
| // regardless the layout direction the shape is in. In the OASIS Open Office |
| // file format the positioning attributes are correctly given in the layout |
| // direction the shape is in. Thus, this code provides the conversion from |
| // the OASIS Open Office file format to the OpenOffice.org file format. |
| if ( ( GetExport().getExportFlags() & EXPORT_OASIS ) == 0 && |
| xProps->getPropertySetInfo()->hasPropertyByName( |
| OUString(RTL_CONSTASCII_USTRINGPARAM("StartPositionInHoriL2R"))) && |
| xProps->getPropertySetInfo()->hasPropertyByName( |
| OUString(RTL_CONSTASCII_USTRINGPARAM("EndPositionInHoriL2R"))) ) |
| { |
| xProps->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("StartPositionInHoriL2R"))) >>= aStart; |
| xProps->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("EndPositionInHoriL2R"))) >>= aEnd; |
| } |
| else |
| { |
| xProps->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("StartPosition"))) >>= aStart; |
| xProps->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("EndPosition"))) >>= aEnd; |
| } |
| // <-- |
| |
| if( pRefPoint ) |
| { |
| aStart.X -= pRefPoint->X; |
| aStart.Y -= pRefPoint->Y; |
| aEnd.X -= pRefPoint->X; |
| aEnd.Y -= pRefPoint->Y; |
| } |
| |
| if( nFeatures & SEF_EXPORT_X ) |
| { |
| // svg: x1 |
| mrExport.GetMM100UnitConverter().convertMeasure(sStringBuffer, aStart.X); |
| aStr = sStringBuffer.makeStringAndClear(); |
| mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_X1, aStr); |
| } |
| else |
| { |
| aEnd.X -= aStart.X; |
| } |
| |
| if( nFeatures & SEF_EXPORT_Y ) |
| { |
| // svg: y1 |
| mrExport.GetMM100UnitConverter().convertMeasure(sStringBuffer, aStart.Y); |
| aStr = sStringBuffer.makeStringAndClear(); |
| mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_Y1, aStr); |
| } |
| else |
| { |
| aEnd.Y -= aStart.Y; |
| } |
| |
| // svg: x2 |
| mrExport.GetMM100UnitConverter().convertMeasure(sStringBuffer, aEnd.X); |
| aStr = sStringBuffer.makeStringAndClear(); |
| mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_X2, aStr); |
| |
| // svg: y2 |
| mrExport.GetMM100UnitConverter().convertMeasure(sStringBuffer, aEnd.Y); |
| aStr = sStringBuffer.makeStringAndClear(); |
| mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_Y2, aStr); |
| |
| // #i39320# |
| uno::Reference< uno::XInterface > xRefS; |
| uno::Reference< uno::XInterface > xRefE; |
| |
| // export start connection |
| xProps->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("StartShape") ) ) >>= xRefS; |
| if( xRefS.is() ) |
| { |
| const OUString& rShapeId = mrExport.getInterfaceToIdentifierMapper().getIdentifier( xRefS ); |
| mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_START_SHAPE, rShapeId); |
| |
| aAny = xProps->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("StartGluePointIndex")) ); |
| sal_Int32 nGluePointId = 0; |
| if( aAny >>= nGluePointId ) |
| { |
| if( nGluePointId != -1 ) |
| { |
| mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_START_GLUE_POINT, OUString::valueOf( nGluePointId )); |
| } |
| } |
| } |
| |
| // export end connection |
| xProps->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("EndShape")) ) >>= xRefE; |
| if( xRefE.is() ) |
| { |
| const OUString& rShapeId = mrExport.getInterfaceToIdentifierMapper().getIdentifier( xRefE ); |
| mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_END_SHAPE, rShapeId); |
| |
| aAny = xProps->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("EndGluePointIndex")) ); |
| sal_Int32 nGluePointId = 0; |
| if( aAny >>= nGluePointId ) |
| { |
| if( nGluePointId != -1 ) |
| { |
| mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_END_GLUE_POINT, OUString::valueOf( nGluePointId )); |
| } |
| } |
| } |
| |
| if( xProps->getPropertyValue( OUString( RTL_CONSTASCII_USTRINGPARAM("PolyPolygonBezier") ) ) >>= aAny ) |
| { |
| // get PolygonBezier |
| drawing::PolyPolygonBezierCoords* pSourcePolyPolygon = (drawing::PolyPolygonBezierCoords*)aAny.getValue(); |
| |
| if(pSourcePolyPolygon && pSourcePolyPolygon->Coordinates.getLength()) |
| { |
| const basegfx::B2DPolyPolygon aPolyPolygon( |
| basegfx::tools::UnoPolyPolygonBezierCoordsToB2DPolyPolygon( |
| *pSourcePolyPolygon)); |
| const ::rtl::OUString aPolygonString( |
| basegfx::tools::exportToSvgD( |
| aPolyPolygon, |
| true, // bUseRelativeCoordinates |
| false, // bDetectQuadraticBeziers: not used in old, but maybe activated now |
| true)); // bHandleRelativeNextPointCompatible |
| |
| // write point array |
| mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_D, aPolygonString); |
| } |
| } |
| |
| // write connector shape. Add Export later. |
| sal_Bool bCreateNewline( (nFeatures & SEF_EXPORT_NO_WS) == 0 ); // #86116#/#92210# |
| SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DRAW, XML_CONNECTOR, bCreateNewline, sal_True); |
| |
| ImpExportDescription( xShape ); // #i68101# |
| ImpExportEvents( xShape ); |
| ImpExportGluePoints( xShape ); |
| ImpExportText( xShape ); |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| void XMLShapeExport::ImpExportMeasureShape( |
| const uno::Reference< drawing::XShape >& xShape, |
| XmlShapeType, sal_Int32 nFeatures /* = SEF_DEFAULT */, awt::Point* pRefPoint /* = NULL */) |
| { |
| uno::Reference< beans::XPropertySet > xProps( xShape, uno::UNO_QUERY ); |
| |
| OUString aStr; |
| OUStringBuffer sStringBuffer; |
| |
| // export start and end point |
| awt::Point aStart(0,0); |
| awt::Point aEnd(1,1); |
| |
| // --> OD 2004-08-09 #i36248# - Get <StartPositionInHoriL2R> and |
| // <EndPositionInHoriL2R>, if they exist and if the document is exported |
| // into the OpenOffice.org file format. |
| // These properties only exist at service com::sun::star::text::Shape - the |
| // Writer UNO service for shapes. |
| // This code is needed, because the positioning attributes in the |
| // OpenOffice.org file format are given in horizontal left-to-right layout |
| // regardless the layout direction the shape is in. In the OASIS Open Office |
| // file format the positioning attributes are correctly given in the layout |
| // direction the shape is in. Thus, this code provides the conversion from |
| // the OASIS Open Office file format to the OpenOffice.org file format. |
| if ( ( GetExport().getExportFlags() & EXPORT_OASIS ) == 0 && |
| xProps->getPropertySetInfo()->hasPropertyByName( |
| OUString(RTL_CONSTASCII_USTRINGPARAM("StartPositionInHoriL2R"))) && |
| xProps->getPropertySetInfo()->hasPropertyByName( |
| OUString(RTL_CONSTASCII_USTRINGPARAM("EndPositionInHoriL2R"))) ) |
| { |
| xProps->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("StartPositionInHoriL2R"))) >>= aStart; |
| xProps->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("EndPositionInHoriL2R"))) >>= aEnd; |
| } |
| else |
| { |
| xProps->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("StartPosition"))) >>= aStart; |
| xProps->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("EndPosition"))) >>= aEnd; |
| } |
| // <-- |
| |
| if( pRefPoint ) |
| { |
| aStart.X -= pRefPoint->X; |
| aStart.Y -= pRefPoint->Y; |
| aEnd.X -= pRefPoint->X; |
| aEnd.Y -= pRefPoint->Y; |
| } |
| |
| if( nFeatures & SEF_EXPORT_X ) |
| { |
| // svg: x1 |
| mrExport.GetMM100UnitConverter().convertMeasure(sStringBuffer, aStart.X); |
| aStr = sStringBuffer.makeStringAndClear(); |
| mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_X1, aStr); |
| } |
| else |
| { |
| aEnd.X -= aStart.X; |
| } |
| |
| if( nFeatures & SEF_EXPORT_Y ) |
| { |
| // svg: y1 |
| mrExport.GetMM100UnitConverter().convertMeasure(sStringBuffer, aStart.Y); |
| aStr = sStringBuffer.makeStringAndClear(); |
| mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_Y1, aStr); |
| } |
| else |
| { |
| aEnd.Y -= aStart.Y; |
| } |
| |
| // svg: x2 |
| mrExport.GetMM100UnitConverter().convertMeasure(sStringBuffer, aEnd.X); |
| aStr = sStringBuffer.makeStringAndClear(); |
| mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_X2, aStr); |
| |
| // svg: y2 |
| mrExport.GetMM100UnitConverter().convertMeasure(sStringBuffer, aEnd.Y); |
| aStr = sStringBuffer.makeStringAndClear(); |
| mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_Y2, aStr); |
| |
| // write measure shape |
| sal_Bool bCreateNewline( (nFeatures & SEF_EXPORT_NO_WS) == 0 ); // #86116#/#92210# |
| SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DRAW, XML_MEASURE, bCreateNewline, sal_True); |
| |
| ImpExportDescription( xShape ); // #i68101# |
| ImpExportEvents( xShape ); |
| ImpExportGluePoints( xShape ); |
| |
| uno::Reference< text::XText > xText( xShape, uno::UNO_QUERY ); |
| if( xText.is() ) |
| mrExport.GetTextParagraphExport()->exportText( xText ); |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| void XMLShapeExport::ImpExportOLE2Shape( |
| const uno::Reference< drawing::XShape >& xShape, |
| XmlShapeType eShapeType, sal_Int32 nFeatures /* = SEF_DEFAULT */, awt::Point* pRefPoint /* = NULL */, |
| SvXMLAttributeList* pAttrList /* = NULL */ ) |
| { |
| uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY); |
| uno::Reference< container::XNamed > xNamed(xShape, uno::UNO_QUERY); |
| |
| DBG_ASSERT( xPropSet.is() && xNamed.is(), "ole shape is not implementing needed interfaces"); |
| if(xPropSet.is() && xNamed.is()) |
| { |
| // Transformation |
| ImpExportNewTrans(xPropSet, nFeatures, pRefPoint); |
| |
| sal_Bool bIsEmptyPresObj = sal_False; |
| |
| // presentation settings |
| if(eShapeType == XmlShapeTypePresOLE2Shape) |
| bIsEmptyPresObj = ImpExportPresentationAttributes( xPropSet, GetXMLToken(XML_PRESENTATION_OBJECT) ); |
| else if(eShapeType == XmlShapeTypePresChartShape) |
| bIsEmptyPresObj = ImpExportPresentationAttributes( xPropSet, GetXMLToken(XML_PRESENTATION_CHART) ); |
| else if(eShapeType == XmlShapeTypePresSheetShape) |
| bIsEmptyPresObj = ImpExportPresentationAttributes( xPropSet, GetXMLToken(XML_PRESENTATION_TABLE) ); |
| |
| sal_Bool bCreateNewline( (nFeatures & SEF_EXPORT_NO_WS) == 0 ); // #86116#/#92210# |
| sal_Bool bExportEmbedded(0 != (mrExport.getExportFlags() & EXPORT_EMBEDDED)); |
| OUString sPersistName; |
| SvXMLElementExport aElement( mrExport, XML_NAMESPACE_DRAW, |
| XML_FRAME, bCreateNewline, sal_True ); |
| |
| const bool bSaveBackwardsCompatible = ( mrExport.getExportFlags() & EXPORT_SAVEBACKWARDCOMPATIBLE ); |
| |
| if( !bIsEmptyPresObj || bSaveBackwardsCompatible ) |
| { |
| if (pAttrList) |
| { |
| mrExport.AddAttributeList(pAttrList); |
| } |
| |
| OUString sClassId; |
| OUString sURL; |
| sal_Bool bInternal = false; |
| xPropSet->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("IsInternal"))) >>= bInternal; |
| |
| if( !bIsEmptyPresObj ) |
| { |
| |
| if ( bInternal ) |
| { |
| // OOo internal links have no storage persistance, URL is stored in the XML file |
| // the result LinkURL is empty in case the object is not a link |
| xPropSet->getPropertyValue( OUString::createFromAscii( "LinkURL" ) ) >>= sURL; |
| } |
| |
| xPropSet->getPropertyValue( OUString(RTL_CONSTASCII_USTRINGPARAM( "PersistName" ) ) ) >>= sPersistName; |
| if ( !sURL.getLength() ) |
| { |
| if( sPersistName.getLength() ) |
| { |
| sURL = OUString( RTL_CONSTASCII_USTRINGPARAM( "vnd.sun.star.EmbeddedObject:" ) ); |
| sURL += sPersistName; |
| } |
| } |
| |
| if( !bInternal ) |
| xPropSet->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("CLSID"))) >>= sClassId; |
| |
| if( sClassId.getLength() ) |
| mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_CLASS_ID, sClassId ); |
| if(!bExportEmbedded) |
| { |
| // xlink:href |
| if( sURL.getLength() ) |
| { |
| // #96717# in theorie, if we don't have a url we shouldn't even |
| // export this ole shape. But practical its to risky right now |
| // to change this so we better dispose this on load |
| sURL = mrExport.AddEmbeddedObject( sURL ); |
| |
| mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_HREF, sURL ); |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE ); |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_SHOW, XML_EMBED ); |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONLOAD ); |
| } |
| } |
| } |
| else |
| { |
| // export empty href for empty placeholders to be valid odf |
| OUString sEmptyURL; |
| |
| mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_HREF, sEmptyURL ); |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE ); |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_SHOW, XML_EMBED ); |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONLOAD ); |
| } |
| |
| enum XMLTokenEnum eElem = sClassId.getLength() ? XML_OBJECT_OLE : XML_OBJECT; |
| SvXMLElementExport aElem( mrExport, XML_NAMESPACE_DRAW, eElem, sal_True, sal_True ); |
| |
| // #i118485# Add text export, the draw OLE shape allows text now |
| ImpExportText( xShape ); |
| |
| if(bExportEmbedded && !bIsEmptyPresObj) |
| { |
| // #100592# |
| if(bInternal) |
| { |
| // embedded XML |
| uno::Reference< lang::XComponent > xComp; |
| xPropSet->getPropertyValue( OUString(RTL_CONSTASCII_USTRINGPARAM("Model") ) ) >>= xComp; |
| DBG_ASSERT( xComp.is(), "no xModel for own OLE format" ); |
| mrExport.ExportEmbeddedOwnObject( xComp ); |
| } |
| else |
| { |
| // embed as Base64 |
| // this is an alien object ( currently MSOLE is the only supported type of such objects ) |
| // in case it is not an OASIS format the object should be asked to store replacement image if possible |
| |
| ::rtl::OUString sURLRequest( sURL ); |
| if ( ( mrExport.getExportFlags() & EXPORT_OASIS ) == 0 ) |
| sURLRequest += ::rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( "?oasis=false" ) ); |
| mrExport.AddEmbeddedObjectAsBase64( sURLRequest ); |
| } |
| } |
| } |
| if( !bIsEmptyPresObj ) |
| { |
| OUString sURL( RTL_CONSTASCII_USTRINGPARAM( "vnd.sun.star.GraphicObject:" ) ); |
| sURL += sPersistName; |
| if( !bExportEmbedded ) |
| { |
| sURL = GetExport().AddEmbeddedObject( sURL ); |
| mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_HREF, sURL ); |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE ); |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_SHOW, XML_EMBED ); |
| mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONLOAD ); |
| } |
| |
| SvXMLElementExport aElem( GetExport(), XML_NAMESPACE_DRAW, |
| XML_IMAGE, sal_False, sal_True ); |
| |
| if( bExportEmbedded ) |
| GetExport().AddEmbeddedObjectAsBase64( sURL ); |
| } |
| |
| ImpExportEvents( xShape ); |
| ImpExportGluePoints( xShape ); |
| ImpExportDescription( xShape ); // #i68101# |
| } |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| void XMLShapeExport::ImpExportPageShape( |
| const uno::Reference< drawing::XShape >& xShape, |
| XmlShapeType eShapeType, sal_Int32 nFeatures /* = SEF_DEFAULT */, awt::Point* pRefPoint /* = NULL */) |
| { |
| const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY); |
| if(xPropSet.is()) |
| { |
| // #86163# Transformation |
| ImpExportNewTrans(xPropSet, nFeatures, pRefPoint); |
| |
| // export page number used for this page |
| uno::Reference< beans::XPropertySetInfo > xPropSetInfo( xPropSet->getPropertySetInfo() ); |
| const OUString aPageNumberStr(RTL_CONSTASCII_USTRINGPARAM("PageNumber")); |
| if( xPropSetInfo.is() && xPropSetInfo->hasPropertyByName(aPageNumberStr)) |
| { |
| sal_Int32 nPageNumber = 0; |
| xPropSet->getPropertyValue(aPageNumberStr) >>= nPageNumber; |
| if( nPageNumber ) |
| mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_PAGE_NUMBER, OUString::valueOf(nPageNumber)); |
| } |
| |
| // a presentation page shape, normally used on notes pages only. If |
| // it is used not as presentation shape, it may have been created with |
| // copy-paste exchange between draw and impress (this IS possible...) |
| if(eShapeType == XmlShapeTypePresPageShape) |
| { |
| mrExport.AddAttribute(XML_NAMESPACE_PRESENTATION, XML_CLASS, |
| XML_PRESENTATION_PAGE); |
| } |
| |
| // write Page shape |
| sal_Bool bCreateNewline( (nFeatures & SEF_EXPORT_NO_WS) == 0 ); // #86116#/#92210# |
| SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DRAW, XML_PAGE_THUMBNAIL, bCreateNewline, sal_True); |
| } |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| void XMLShapeExport::ImpExportCaptionShape( |
| const uno::Reference< drawing::XShape >& xShape, |
| XmlShapeType, sal_Int32 nFeatures /* = SEF_DEFAULT */, awt::Point* pRefPoint /* = NULL */) |
| { |
| const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY); |
| if(xPropSet.is()) |
| { |
| // Transformation |
| ImpExportNewTrans(xPropSet, nFeatures, pRefPoint); |
| |
| // evtl. corner radius? |
| sal_Int32 nCornerRadius(0L); |
| xPropSet->getPropertyValue(OUString(RTL_CONSTASCII_USTRINGPARAM("CornerRadius"))) >>= nCornerRadius; |
| if(nCornerRadius) |
| { |
| OUStringBuffer sStringBuffer; |
| mrExport.GetMM100UnitConverter().convertMeasure(sStringBuffer, nCornerRadius); |
| mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_CORNER_RADIUS, sStringBuffer.makeStringAndClear()); |
| } |
| |
| awt::Point aCaptionPoint; |
| xPropSet->getPropertyValue( OUString( RTL_CONSTASCII_USTRINGPARAM( "CaptionPoint" ) ) ) >>= aCaptionPoint; |
| |
| mrExport.GetMM100UnitConverter().convertMeasure(msBuffer, aCaptionPoint.X); |
| mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_CAPTION_POINT_X, msBuffer.makeStringAndClear() ); |
| mrExport.GetMM100UnitConverter().convertMeasure(msBuffer, aCaptionPoint.Y); |
| mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_CAPTION_POINT_Y, msBuffer.makeStringAndClear() ); |
| |
| // write Caption shape. Add export later. |
| sal_Bool bCreateNewline( (nFeatures & SEF_EXPORT_NO_WS) == 0 ); // #86116#/#92210# |
| sal_Bool bAnnotation( (nFeatures & SEF_EXPORT_ANNOTATION) == SEF_EXPORT_ANNOTATION ); |
| |
| SvXMLElementExport aObj( mrExport, |
| (bAnnotation ? XML_NAMESPACE_OFFICE |
| : XML_NAMESPACE_DRAW), |
| (bAnnotation ? XML_ANNOTATION : XML_CAPTION), |
| bCreateNewline, sal_True ); |
| |
| ImpExportDescription( xShape ); // #i68101# |
| ImpExportEvents( xShape ); |
| ImpExportGluePoints( xShape ); |
| if( bAnnotation ) |
| mrExport.exportAnnotationMeta( xShape ); |
| ImpExportText( xShape ); |
| } |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| void XMLShapeExport::ImpExportFrameShape( |
| const uno::Reference< drawing::XShape >& xShape, |
| XmlShapeType, sal_Int32 nFeatures, com::sun::star::awt::Point* pRefPoint) |
| { |
| const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY); |
| if(xPropSet.is()) |
| { |
| // Transformation |
| ImpExportNewTrans(xPropSet, nFeatures, pRefPoint); |
| |
| sal_Bool bCreateNewline( (nFeatures & SEF_EXPORT_NO_WS) == 0 ); // #86116#/#92210# |
| SvXMLElementExport aElem( mrExport, XML_NAMESPACE_DRAW, |
| XML_FRAME, bCreateNewline, sal_True ); |
| |
| // export frame url |
| OUString aStr; |
| xPropSet->getPropertyValue( OUString( RTL_CONSTASCII_USTRINGPARAM( "FrameURL" ) ) ) >>= aStr; |
| mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_HREF, GetExport().GetRelativeReference(aStr) ); |
| mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE ); |
| mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_SHOW, XML_EMBED ); |
| mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONLOAD ); |
| |
| // export name |
| xPropSet->getPropertyValue( OUString( RTL_CONSTASCII_USTRINGPARAM( "FrameName" ) ) ) >>= aStr; |
| if( aStr.getLength() ) |
| mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_FRAME_NAME, aStr ); |
| |
| // write floating frame |
| { |
| SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DRAW, XML_FLOATING_FRAME, sal_True, sal_True); |
| } |
| } |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| void XMLShapeExport::ImpExportAppletShape( |
| const uno::Reference< drawing::XShape >& xShape, |
| XmlShapeType, sal_Int32 nFeatures, com::sun::star::awt::Point* pRefPoint) |
| { |
| const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY); |
| if(xPropSet.is()) |
| { |
| // Transformation |
| ImpExportNewTrans(xPropSet, nFeatures, pRefPoint); |
| |
| sal_Bool bCreateNewline( (nFeatures & SEF_EXPORT_NO_WS) == 0 ); // #86116#/#92210# |
| SvXMLElementExport aElement( mrExport, XML_NAMESPACE_DRAW, |
| XML_FRAME, bCreateNewline, sal_True ); |
| |
| // export frame url |
| OUString aStr; |
| xPropSet->getPropertyValue( OUString( RTL_CONSTASCII_USTRINGPARAM( "AppletCodeBase" ) ) ) >>= aStr; |
| mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_HREF, GetExport().GetRelativeReference(aStr) ); |
| mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE ); |
| mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_SHOW, XML_EMBED ); |
| mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONLOAD ); |
| |
| // export draw:applet-name |
| xPropSet->getPropertyValue( OUString( RTL_CONSTASCII_USTRINGPARAM( "AppletName" ) ) ) >>= aStr; |
| if( aStr.getLength() ) |
| mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_APPLET_NAME, aStr ); |
| |
| // export draw:code |
| xPropSet->getPropertyValue( OUString( RTL_CONSTASCII_USTRINGPARAM( "AppletCode" ) ) ) >>= aStr; |
| mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_CODE, aStr ); |
| |
| // export draw:may-script |
| sal_Bool bIsScript = false; |
| xPropSet->getPropertyValue( OUString( RTL_CONSTASCII_USTRINGPARAM( "AppletIsScript" ) ) ) >>= bIsScript; |
| mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_MAY_SCRIPT, bIsScript ? XML_TRUE : XML_FALSE ); |
| |
| { |
| // write applet |
| SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DRAW, XML_APPLET, sal_True, sal_True); |
| |
| // export parameters |
| uno::Sequence< beans::PropertyValue > aCommands; |
| xPropSet->getPropertyValue( OUString( RTL_CONSTASCII_USTRINGPARAM( "AppletCommands" ) ) ) >>= aCommands; |
| const sal_Int32 nCount = aCommands.getLength(); |
| for( sal_Int32 nIndex = 0; nIndex < nCount; nIndex++ ) |
| { |
| aCommands[nIndex].Value >>= aStr; |
| mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_NAME, aCommands[nIndex].Name ); |
| mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_VALUE, aStr ); |
| SvXMLElementExport aElem( mrExport, XML_NAMESPACE_DRAW, XML_PARAM, sal_False, sal_True ); |
| } |
| } |
| } |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| void XMLShapeExport::ImpExportPluginShape( |
| const uno::Reference< drawing::XShape >& xShape, |
| XmlShapeType, sal_Int32 nFeatures, com::sun::star::awt::Point* pRefPoint) |
| { |
| const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY); |
| if(xPropSet.is()) |
| { |
| // Transformation |
| ImpExportNewTrans(xPropSet, nFeatures, pRefPoint); |
| |
| sal_Bool bCreateNewline( (nFeatures & SEF_EXPORT_NO_WS) == 0 ); // #86116#/#92210# |
| SvXMLElementExport aElement( mrExport, XML_NAMESPACE_DRAW, |
| XML_FRAME, bCreateNewline, sal_True ); |
| |
| // export plugin url |
| OUString aStr; |
| xPropSet->getPropertyValue( OUString( RTL_CONSTASCII_USTRINGPARAM( "PluginURL" ) ) ) >>= aStr; |
| mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_HREF, GetExport().GetRelativeReference(aStr) ); |
| mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE ); |
| mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_SHOW, XML_EMBED ); |
| mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONLOAD ); |
| |
| |
| // export mime-type |
| xPropSet->getPropertyValue( OUString( RTL_CONSTASCII_USTRINGPARAM( "PluginMimeType" ) ) ) >>= aStr; |
| if(aStr.getLength()) |
| mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_MIME_TYPE, aStr ); |
| |
| { |
| // write plugin |
| SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DRAW, XML_PLUGIN, sal_True, sal_True); |
| |
| // export parameters |
| uno::Sequence< beans::PropertyValue > aCommands; |
| xPropSet->getPropertyValue( OUString( RTL_CONSTASCII_USTRINGPARAM( "PluginCommands" ) ) ) >>= aCommands; |
| const sal_Int32 nCount = aCommands.getLength(); |
| for( sal_Int32 nIndex = 0; nIndex < nCount; nIndex++ ) |
| { |
| aCommands[nIndex].Value >>= aStr; |
| mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_NAME, aCommands[nIndex].Name ); |
| mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_VALUE, aStr ); |
| SvXMLElementExport aElem( mrExport, XML_NAMESPACE_DRAW, XML_PARAM, sal_False, sal_True ); |
| } |
| } |
| } |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| void XMLShapeExport::ImpExportMediaShape( |
| const uno::Reference< drawing::XShape >& xShape, |
| XmlShapeType eShapeType, sal_Int32 nFeatures, com::sun::star::awt::Point* pRefPoint) |
| { |
| const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY); |
| if(xPropSet.is()) |
| { |
| // Transformation |
| ImpExportNewTrans(xPropSet, nFeatures, pRefPoint); |
| |
| if(eShapeType == XmlShapeTypePresMediaShape) |
| ImpExportPresentationAttributes( xPropSet, GetXMLToken(XML_PRESENTATION_OBJECT) ); |
| |
| sal_Bool bCreateNewline( (nFeatures & SEF_EXPORT_NO_WS) == 0 ); // #86116#/#92210# |
| SvXMLElementExport aElem( mrExport, XML_NAMESPACE_DRAW, |
| XML_FRAME, bCreateNewline, sal_True ); |
| |
| // export media url |
| OUString aMediaURL; |
| xPropSet->getPropertyValue( OUString( RTL_CONSTASCII_USTRINGPARAM( "MediaURL" ) ) ) >>= aMediaURL; |
| mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_HREF, GetExport().GetRelativeReference( aMediaURL ) ); |
| mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE ); |
| mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_SHOW, XML_EMBED ); |
| mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONLOAD ); |
| |
| // export mime-type |
| mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_MIME_TYPE, OUString( RTL_CONSTASCII_USTRINGPARAM( "application/vnd.sun.star.media" ) ) ); |
| |
| // write plugin |
| SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DRAW, XML_PLUGIN, !( nFeatures & SEF_EXPORT_NO_WS ), sal_True); |
| |
| // export parameters |
| const OUString aFalseStr( RTL_CONSTASCII_USTRINGPARAM( "false" ) ), aTrueStr( RTL_CONSTASCII_USTRINGPARAM( "true" ) ); |
| |
| sal_Bool bLoop = false; |
| const OUString aLoopStr( RTL_CONSTASCII_USTRINGPARAM( "Loop" ) ); |
| xPropSet->getPropertyValue( aLoopStr ) >>= bLoop; |
| mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_NAME, aLoopStr ); |
| mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_VALUE, bLoop ? aTrueStr : aFalseStr ); |
| delete( new SvXMLElementExport( mrExport, XML_NAMESPACE_DRAW, XML_PARAM, sal_False, sal_True ) ); |
| |
| sal_Bool bMute = false; |
| const OUString aMuteStr( RTL_CONSTASCII_USTRINGPARAM( "Mute" ) ); |
| xPropSet->getPropertyValue( aMuteStr ) >>= bMute; |
| mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_NAME, aMuteStr ); |
| mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_VALUE, bMute ? aTrueStr : aFalseStr ); |
| delete( new SvXMLElementExport( mrExport, XML_NAMESPACE_DRAW, XML_PARAM, sal_False, sal_True ) ); |
| |
| sal_Int16 nVolumeDB = 0; |
| const OUString aVolumeDBStr( RTL_CONSTASCII_USTRINGPARAM( "VolumeDB" ) ); |
| xPropSet->getPropertyValue( OUString( RTL_CONSTASCII_USTRINGPARAM( "VolumeDB" ) ) ) >>= nVolumeDB; |
| mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_NAME, aVolumeDBStr ); |
| mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_VALUE, OUString::valueOf( static_cast< sal_Int32 >( nVolumeDB ) ) ); |
| delete( new SvXMLElementExport( mrExport, XML_NAMESPACE_DRAW, XML_PARAM, sal_False, sal_True ) ); |
| |
| media::ZoomLevel eZoom; |
| const OUString aZoomStr( RTL_CONSTASCII_USTRINGPARAM( "Zoom" ) ); |
| OUString aZoomValue; |
| xPropSet->getPropertyValue( OUString( RTL_CONSTASCII_USTRINGPARAM( "Zoom" ) ) ) >>= eZoom; |
| switch( eZoom ) |
| { |
| case( media::ZoomLevel_ZOOM_1_TO_4 ): aZoomValue = OUString( RTL_CONSTASCII_USTRINGPARAM( "25%" ) ); break; |
| case( media::ZoomLevel_ZOOM_1_TO_2 ): aZoomValue = OUString( RTL_CONSTASCII_USTRINGPARAM( "50%" ) ); break; |
| case( media::ZoomLevel_ORIGINAL ): aZoomValue = OUString( RTL_CONSTASCII_USTRINGPARAM( "100%" ) ); break; |
| case( media::ZoomLevel_ZOOM_2_TO_1 ): aZoomValue = OUString( RTL_CONSTASCII_USTRINGPARAM( "200%" ) ); break; |
| case( media::ZoomLevel_ZOOM_4_TO_1 ): aZoomValue = OUString( RTL_CONSTASCII_USTRINGPARAM( "400%" ) ); break; |
| case( media::ZoomLevel_FIT_TO_WINDOW ): aZoomValue = OUString( RTL_CONSTASCII_USTRINGPARAM( "fit" ) ); break; |
| case( media::ZoomLevel_FIT_TO_WINDOW_FIXED_ASPECT ): aZoomValue = OUString( RTL_CONSTASCII_USTRINGPARAM( "fixedfit" ) ); break; |
| case( media::ZoomLevel_FULLSCREEN ): aZoomValue = OUString( RTL_CONSTASCII_USTRINGPARAM( "fullscreen" ) ); break; |
| |
| default: |
| break; |
| } |
| |
| if( aZoomValue.getLength() ) |
| { |
| mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_NAME, aZoomStr ); |
| mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_VALUE, aZoomValue ); |
| delete( new SvXMLElementExport( mrExport, XML_NAMESPACE_DRAW, XML_PARAM, sal_False, sal_True ) ); |
| } |
| } |
| } |
