| /************************************************************** |
| * |
| * Licensed to the Apache Software Foundation (ASF) under one |
| * or more contributor license agreements. See the NOTICE file |
| * distributed with this work for additional information |
| * regarding copyright ownership. The ASF licenses this file |
| * to you under the Apache License, Version 2.0 (the |
| * "License"); you may not use this file except in compliance |
| * with the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, |
| * software distributed under the License is distributed on an |
| * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| * KIND, either express or implied. See the License for the |
| * specific language governing permissions and limitations |
| * under the License. |
| * |
| *************************************************************/ |
| |
| |
| |
| // MARKER(update_precomp.py): autogen include statement, do not remove |
| #include "precompiled_unotools.hxx" |
| #ifndef GCC |
| #endif |
| |
| //_________________________________________________________________________________________________________________ |
| // includes |
| //_________________________________________________________________________________________________________________ |
| |
| #include <deque> |
| |
| #include <unotools/internaloptions.hxx> |
| #include <unotools/configmgr.hxx> |
| #include <unotools/configitem.hxx> |
| #include <tools/debug.hxx> |
| #include <com/sun/star/uno/Any.hxx> |
| #include <com/sun/star/uno/Sequence.hxx> |
| #include <com/sun/star/beans/PropertyValue.hpp> |
| |
| #include <rtl/logfile.hxx> |
| #include "itemholder1.hxx" |
| |
| //_________________________________________________________________________________________________________________ |
| // namespaces |
| //_________________________________________________________________________________________________________________ |
| |
| using namespace ::utl ; |
| using namespace ::rtl ; |
| using namespace ::osl ; |
| using namespace ::std ; |
| using namespace ::com::sun::star::uno ; |
| using namespace ::com::sun::star::beans ; |
| |
| //_________________________________________________________________________________________________________________ |
| // const |
| //_________________________________________________________________________________________________________________ |
| |
| #define ROOTNODE_INTERNAL OUString(RTL_CONSTASCII_USTRINGPARAM("Office.Common/Internal" )) |
| #define DEFAULT_SLOTCFG sal_False |
| #define DEFAULT_SENDCRASHMAIL sal_False |
| #define DEFAULT_USEMAILUI sal_True |
| #define DEFAULT_CURRENTTEMPURL OUString(RTL_CONSTASCII_USTRINGPARAM("")) |
| |
| #define FIXPROPERTYNAME_SLOTCFG OUString(RTL_CONSTASCII_USTRINGPARAM("Slot" )) |
| #define FIXPROPERTYNAME_SENDCRASHMAIL OUString(RTL_CONSTASCII_USTRINGPARAM("SendCrashMail" )) |
| #define FIXPROPERTYNAME_USEMAILUI OUString(RTL_CONSTASCII_USTRINGPARAM("UseMailUI" )) |
| #define FIXPROPERTYNAME_CURRENTTEMPURL OUString(RTL_CONSTASCII_USTRINGPARAM("CurrentTempURL" )) |
| //#define FIXPROPERTYNAME_REMOVEMENUENTRYCLOSE OUString(RTL_CONSTASCII_USTRINGPARAM("RemoveMenuEntryClose")) |
| //#define FIXPROPERTYNAME_REMOVEMENUENTRYBACKTOWEBTOP OUString(RTL_CONSTASCII_USTRINGPARAM("RemoveMenuEntryBackToWebtop")) |
| //#define FIXPROPERTYNAME_REMOVEMENUENTRYNEWWEBTOP OUString(RTL_CONSTASCII_USTRINGPARAM("RemoveMenuEntryNewWebtop")) |
| //#define FIXPROPERTYNAME_REMOVEMENUENTRYLOGOUT OUString(RTL_CONSTASCII_USTRINGPARAM("RemoveMenuEntryLogout")) |
| |
| #define FIXPROPERTYHANDLE_SLOTCFG 0 |
| #define FIXPROPERTYHANDLE_SENDCRASHMAIL 1 |
| #define FIXPROPERTYHANDLE_USEMAILUI 2 |
| #define FIXPROPERTYHANDLE_CURRENTTEMPURL 3 |
| //#define FIXPROPERTYHANDLE_REMOVEMENUENTRYCLOSE 3 |
| //#define FIXPROPERTYHANDLE_REMOVEMENUENTRYBACKTOWEBTOP 4 |
| //#define FIXPROPERTYHANDLE_REMOVEMENUENTRYNEWWEBTOP 5 |
| //#define FIXPROPERTYHANDLE_REMOVEMENUENTRYLOGOUT 6 |
| |
| #define FIXPROPERTYCOUNT 4 |
| /* |
| #define PROPERTYNAME_RECOVERYLIST OUString(RTL_CONSTASCII_USTRINGPARAM("RecoveryList" )) |
| #define PROPERTYNAME_URL OUString(RTL_CONSTASCII_USTRINGPARAM("OrgURL" )) |
| #define PROPERTYNAME_FILTER OUString(RTL_CONSTASCII_USTRINGPARAM("FilterName" )) |
| #define PROPERTYNAME_TEMPNAME OUString(RTL_CONSTASCII_USTRINGPARAM("TempURL" )) |
| |
| #define OFFSET_URL 0 |
| #define OFFSET_FILTER 1 |
| #define OFFSET_TEMPNAME 2 |
| */ |
| #define PATHDELIMITER OUString(RTL_CONSTASCII_USTRINGPARAM("/" )) |
| #define FIXR OUString(RTL_CONSTASCII_USTRINGPARAM("r" )) |
| |
| //_________________________________________________________________________________________________________________ |
| // private declarations! |
| //_________________________________________________________________________________________________________________ |
| /* |
| struct tIMPL_RecoveryEntry |
| { |
| OUString sURL ; |
| OUString sFilter ; |
| OUString sTempName ; |
| |
| tIMPL_RecoveryEntry() |
| { |
| sURL = OUString(); |
| sFilter = OUString(); |
| sTempName = OUString(); |
| } |
| |
| tIMPL_RecoveryEntry( const OUString& sNewURL , |
| const OUString& sNewFilter , |
| const OUString& sNewTempName ) |
| { |
| sURL = sNewURL ; |
| sFilter = sNewFilter ; |
| sTempName = sNewTempName ; |
| } |
| }; |
| |
| typedef deque< tIMPL_RecoveryEntry > tIMPL_RecoveryStack; |
| */ |
| class SvtInternalOptions_Impl : public ConfigItem |
| { |
| //------------------------------------------------------------------------------------------------------------- |
| // private member |
| //------------------------------------------------------------------------------------------------------------- |
| |
| private: |
| |
| sal_Bool m_bRemoveMenuEntryClose; |
| sal_Bool m_bRemoveMenuEntryBackToWebtop; |
| sal_Bool m_bRemoveMenuEntryNewWebtop; |
| sal_Bool m_bRemoveMenuEntryLogout; |
| sal_Bool m_bSlotCFG ; /// cache "Slot" of Internal section |
| sal_Bool m_bSendCrashMail ; /// cache "SendCrashMail" of Internal section |
| sal_Bool m_bUseMailUI; |
| OUString m_aCurrentTempURL ; |
| // tIMPL_RecoveryStack m_aRecoveryList ; /// cache "RecoveryList" of Internal section |
| //------------------------------------------------------------------------------------------------------------- |
| // public methods |
| //------------------------------------------------------------------------------------------------------------- |
| |
| public: |
| |
| //--------------------------------------------------------------------------------------------------------- |
| // constructor / destructor |
| //--------------------------------------------------------------------------------------------------------- |
| |
| SvtInternalOptions_Impl(); |
| ~SvtInternalOptions_Impl(); |
| |
| //--------------------------------------------------------------------------------------------------------- |
| // overloaded methods of baseclass |
| //--------------------------------------------------------------------------------------------------------- |
| |
| /*-****************************************************************************************************//** |
| @short called for notify of configmanager |
| @descr These method is called from the ConfigManager before application ends or from the |
| PropertyChangeListener if the sub tree broadcasts changes. You must update your |
| internal values. |
| |
| @seealso baseclass ConfigItem |
| |
| @param "seqPropertyNames" is the list of properties which should be updated. |
| @return - |
| |
| @onerror - |
| *//*-*****************************************************************************************************/ |
| |
| virtual void Notify( const Sequence< OUString >& ) |
| { |
| DBG_ASSERT( sal_False, "SvtInternalOptions::Notify()\nNot used yet ... but called!?\n" ); |
| } |
| |
| /*-****************************************************************************************************//** |
| @short write changes to configuration |
| @descr These method writes the changed values into the sub tree |
| and should always called in our destructor to guarantee consistency of config data. |
| |
| @seealso baseclass ConfigItem |
| |
| @param - |
| @return - |
| |
| @onerror - |
| *//*-*****************************************************************************************************/ |
| |
| virtual void Commit(); |
| |
| //--------------------------------------------------------------------------------------------------------- |
| // public interface |
| //--------------------------------------------------------------------------------------------------------- |
| |
| /*-****************************************************************************************************//** |
| @short access method to get internal values |
| @descr These method give us a chance to regulate acces to ouer internal values. |
| It's not used in the moment - but it's possible for the feature! |
| |
| @seealso - |
| |
| @param - |
| @return - |
| |
| @onerror - |
| *//*-*****************************************************************************************************/ |
| |
| sal_Bool IsRemoveMenuEntryClose() const { return m_bRemoveMenuEntryClose; } |
| sal_Bool IsRemoveMenuEntryBackToWebtop() const { return m_bRemoveMenuEntryBackToWebtop; } |
| sal_Bool IsRemoveMenuEntryNewWebtop() const { return m_bRemoveMenuEntryNewWebtop; } |
| sal_Bool IsRemoveMenuEntryLogout() const { return m_bRemoveMenuEntryLogout; } |
| sal_Bool SlotCFGEnabled () const { return m_bSlotCFG; } |
| sal_Bool CrashMailEnabled () const { return m_bSendCrashMail; } |
| sal_Bool MailUIEnabled () const { return m_bUseMailUI; } |
| |
| OUString GetCurrentTempURL() const { return m_aCurrentTempURL; } |
| void SetCurrentTempURL( const OUString& aNewCurrentTempURL ); |
| /* |
| void PushRecoveryItem ( const OUString& sURL , |
| const OUString& sFilter , |
| const OUString& sTempName ); |
| void PopRecoveryItem ( OUString& sURL , |
| OUString& sFilter , |
| OUString& sTempName ); |
| sal_Bool IsRecoveryListEmpty ( ) const; |
| */ |
| //------------------------------------------------------------------------------------------------------------- |
| // private methods |
| //------------------------------------------------------------------------------------------------------------- |
| |
| private: |
| |
| /*-****************************************************************************************************//** |
| @short return list of fix key names of ouer configuration management which represent oue module tree |
| @descr These methods return a static const list of key names. We need it to get needed values from our |
| configuration management. We return well known key names only - because the "UserData" node |
| is handled in a special way! |
| |
| @seealso - |
| |
| @param - |
| @return A list of needed configuration keys is returned. |
| |
| @onerror - |
| *//*-*****************************************************************************************************/ |
| |
| Sequence< OUString > impl_GetPropertyNames(); |
| }; |
| |
| //_________________________________________________________________________________________________________________ |
| // definitions |
| //_________________________________________________________________________________________________________________ |
| |
| //***************************************************************************************************************** |
| // constructor |
| //***************************************************************************************************************** |
| SvtInternalOptions_Impl::SvtInternalOptions_Impl() |
| // Init baseclasses first |
| : ConfigItem ( ROOTNODE_INTERNAL, CONFIG_MODE_IMMEDIATE_UPDATE ) |
| // Init member then. |
| , m_bRemoveMenuEntryClose ( sal_False ) |
| , m_bRemoveMenuEntryBackToWebtop ( sal_False ) |
| , m_bRemoveMenuEntryNewWebtop ( sal_False ) |
| , m_bRemoveMenuEntryLogout ( sal_False ) |
| , m_bSlotCFG ( DEFAULT_SLOTCFG ) |
| , m_bSendCrashMail ( DEFAULT_SENDCRASHMAIL ) |
| , m_bUseMailUI ( DEFAULT_USEMAILUI ) |
| , m_aCurrentTempURL ( DEFAULT_CURRENTTEMPURL ) |
| { |
| // Use our list of configuration keys to get his values. |
| // structure of internal section: (first 2 entries are fixed - all other are member of a set!) |
| // "Slot" |
| // "SendCrashMail" |
| // "RecoveryList/r1/URL" |
| // "RecoveryList/r1/Filter" |
| // "RecoveryList/r1/TempName" |
| // "RecoveryList/r2/URL" |
| // "RecoveryList/r2/Filter" |
| // "RecoveryList/r2/TempName" |
| // "RecoveryList/.." |
| Sequence< OUString > seqNames = impl_GetPropertyNames() ; |
| Sequence< Any > seqValues = GetProperties( seqNames ) ; |
| |
| // Safe impossible cases. |
| // We need values from ALL configuration keys. |
| // Follow assignment use order of values in relation to our list of key names! |
| DBG_ASSERT( !(seqNames.getLength()!=seqValues.getLength()), "SvtInternalOptions_Impl::SvtInternalOptions_Impl()\nI miss some values of configuration keys!\n" ); |
| |
| // Read fixed values first! |
| DBG_ASSERT(!(seqValues[FIXPROPERTYHANDLE_SLOTCFG].getValueTypeClass()!=TypeClass_BOOLEAN) , "SvtInternalOptions_Impl::SvtInternalOptions_Impl()\nWho has changed the value type of \"Office.Common\\Internal\\Slot\"?" ); |
| DBG_ASSERT(!(seqValues[FIXPROPERTYHANDLE_SENDCRASHMAIL].getValueTypeClass()!=TypeClass_BOOLEAN) , "SvtInternalOptions_Impl::SvtInternalOptions_Impl()\nWho has changed the value type of \"Office.Common\\Internal\\SendCrashMail\"?" ); |
| seqValues[FIXPROPERTYHANDLE_SLOTCFG ] >>= m_bSlotCFG ; |
| seqValues[FIXPROPERTYHANDLE_SENDCRASHMAIL ] >>= m_bSendCrashMail ; |
| seqValues[FIXPROPERTYHANDLE_USEMAILUI ] >>= m_bUseMailUI ; |
| seqValues[FIXPROPERTYHANDLE_CURRENTTEMPURL ] >>= m_aCurrentTempURL ; |
| // seqValues[FIXPROPERTYHANDLE_REMOVEMENUENTRYCLOSE ] >>= m_bRemoveMenuEntryClose ; |
| // seqValues[FIXPROPERTYHANDLE_REMOVEMENUENTRYBACKTOWEBTOP ] >>= m_bRemoveMenuEntryBackToWebtop ; |
| // seqValues[FIXPROPERTYHANDLE_REMOVEMENUENTRYNEWWEBTOP ] >>= m_bRemoveMenuEntryNewWebtop ; |
| // seqValues[FIXPROPERTYHANDLE_REMOVEMENUENTRYLOGOUT ] >>= m_bRemoveMenuEntryLogout ; |
| /* |
| // Read dynamical set "RecoveryList" then. |
| // 3 subkeys for every item! |
| // Attention: Start at next element after last fixed entry! We must ignore "Slot" and "SendCrashMail" ... |
| tIMPL_RecoveryEntry aEntry; |
| sal_uInt32 nCount = seqValues.getLength() ; |
| sal_uInt32 nPosition = FIXPROPERTYCOUNT ; |
| |
| while( nPosition<nCount ) |
| { |
| seqValues[nPosition] >>= aEntry.sURL ; |
| ++nPosition; |
| seqValues[nPosition] >>= aEntry.sFilter ; |
| ++nPosition; |
| seqValues[nPosition] >>= aEntry.sTempName ; |
| ++nPosition; |
| m_aRecoveryList.push_front( aEntry ); |
| } |
| */ |
| // We don't need any notifications here. |
| // "Slot" and "SendCrashMail" are readonly(!) and our recovery list should not modified during runtime - it's used |
| // by our crash guard only ... otherwise we have a big problem. |
| } |
| |
| //***************************************************************************************************************** |
| // destructor |
| //***************************************************************************************************************** |
| SvtInternalOptions_Impl::~SvtInternalOptions_Impl() |
| { |
| if( IsModified() == sal_True ) |
| { |
| Commit(); |
| } |
| } |
| |
| //***************************************************************************************************************** |
| // public method |
| //***************************************************************************************************************** |
| void SvtInternalOptions_Impl::Commit() |
| { |
| // We have to write our current temp URL |
| Sequence< OUString > aNames( 1 ); |
| OUString* pNames = aNames.getArray(); |
| Sequence< Any > aValues( 1 ); |
| Any* pValues = aValues.getArray(); |
| |
| pNames[0] = FIXPROPERTYNAME_CURRENTTEMPURL; |
| pValues[0] <<= m_aCurrentTempURL; |
| |
| PutProperties( aNames, aValues ); |
| |
| /* |
| // Write set of dynamic properties then. |
| ClearNodeSet( PROPERTYNAME_RECOVERYLIST ); |
| |
| tIMPL_RecoveryEntry aItem ; |
| OUString sNode ; |
| Sequence< PropertyValue > seqPropertyValues( 3 ) ; // Every node in set has 3 sub-nodes!( url, filter, tempname ) |
| |
| // Copy list entries to save-list and write it to configuration. |
| |
| sal_uInt32 nCount = m_aRecoveryList.size(); |
| for( sal_uInt32 nItem=0; nItem<nCount; ++nItem ) |
| { |
| aItem = m_aRecoveryList.top(); |
| m_aRecoveryList.pop(); |
| sNode = PROPERTYNAME_RECOVERYLIST + PATHDELIMITER + FIXR + OUString::valueOf( (sal_Int32)nItem ) + PATHDELIMITER; |
| seqPropertyValues[OFFSET_URL ].Name = sNode + PROPERTYNAME_URL ; |
| seqPropertyValues[OFFSET_FILTER ].Name = sNode + PROPERTYNAME_FILTER ; |
| seqPropertyValues[OFFSET_TEMPNAME ].Name = sNode + PROPERTYNAME_TEMPNAME ; |
| seqPropertyValues[OFFSET_URL ].Value <<= aItem.sURL ; |
| seqPropertyValues[OFFSET_FILTER ].Value <<= aItem.sFilter ; |
| seqPropertyValues[OFFSET_TEMPNAME ].Value <<= aItem.sTempName ; |
| |
| SetSetProperties( PROPERTYNAME_RECOVERYLIST, seqPropertyValues ); |
| } |
| |
| tIMPL_RecoveryStack::iterator iRecovery = m_aRecoveryList.begin(); |
| for ( sal_uInt32 nItem=0; iRecovery != m_aRecoveryList.end(); ++nItem, ++iRecovery) |
| { |
| aItem = *iRecovery; |
| sNode = PROPERTYNAME_RECOVERYLIST + PATHDELIMITER + FIXR + |
| OUString::valueOf( (sal_Int32)nItem ) + PATHDELIMITER; |
| seqPropertyValues[OFFSET_URL ].Name = sNode + PROPERTYNAME_URL ; |
| seqPropertyValues[OFFSET_FILTER ].Name = sNode + PROPERTYNAME_FILTER ; |
| seqPropertyValues[OFFSET_TEMPNAME ].Name = sNode + PROPERTYNAME_TEMPNAME ; |
| seqPropertyValues[OFFSET_URL ].Value <<= iRecovery->sURL ; |
| seqPropertyValues[OFFSET_FILTER ].Value <<= iRecovery->sFilter ; |
| seqPropertyValues[OFFSET_TEMPNAME ].Value <<= iRecovery->sTempName ; |
| SetSetProperties( PROPERTYNAME_RECOVERYLIST, seqPropertyValues ); |
| } |
| |
| */ |
| } |
| |
| //***************************************************************************************************************** |
| // public method |
| //***************************************************************************************************************** |
| void SvtInternalOptions_Impl::SetCurrentTempURL( const OUString& aNewCurrentTempURL ) |
| { |
| m_aCurrentTempURL = aNewCurrentTempURL; |
| SetModified(); |
| Commit(); |
| } |
| |
| #if 0 |
| //***************************************************************************************************************** |
| // public method |
| //***************************************************************************************************************** |
| void SvtInternalOptions_Impl::PushRecoveryItem( const OUString& sURL , |
| const OUString& sFilter , |
| const OUString& sTempName ) |
| { |
| tIMPL_RecoveryEntry aEntry( sURL, sFilter, sTempName ); |
| m_aRecoveryList.push_front( aEntry ); |
| SetModified(); |
| } |
| |
| //***************************************************************************************************************** |
| // public method |
| //***************************************************************************************************************** |
| void SvtInternalOptions_Impl::PopRecoveryItem( OUString& sURL , |
| OUString& sFilter , |
| OUString& sTempName ) |
| { |
| tIMPL_RecoveryEntry aEntry = m_aRecoveryList.front(); |
| m_aRecoveryList.pop_front(); |
| SetModified(); // Don't forget it - we delete an entry here! |
| sURL = aEntry.sURL ; |
| sFilter = aEntry.sFilter ; |
| sTempName = aEntry.sTempName ; |
| } |
| |
| //***************************************************************************************************************** |
| // public method |
| //***************************************************************************************************************** |
| sal_Bool SvtInternalOptions_Impl::IsRecoveryListEmpty() const |
| { |
| return ( m_aRecoveryList.empty() ); |
| } |
| #endif |
| |
| //***************************************************************************************************************** |
| // private method |
| //***************************************************************************************************************** |
| Sequence< OUString > SvtInternalOptions_Impl::impl_GetPropertyNames() |
| { |
| /* |
| // First get ALL names of current existing list items in configuration! |
| Sequence< OUString > seqRecoveryItems = GetNodeNames( PROPERTYNAME_RECOVERYLIST ); |
| // Get information about list counts ... |
| sal_Int32 nRecoveryCount = seqRecoveryItems.getLength(); |
| // ... and create a property list with right size! (+2...for fix properties!) (*3 ... = sub nodes for every set node!) |
| Sequence< OUString > seqProperties( FIXPROPERTYCOUNT + (nRecoveryCount*3) ); |
| */ |
| Sequence< OUString > seqProperties(4); |
| |
| // Add names of fix properties to list. |
| seqProperties[FIXPROPERTYHANDLE_SLOTCFG ] = FIXPROPERTYNAME_SLOTCFG ; |
| seqProperties[FIXPROPERTYHANDLE_SENDCRASHMAIL ] = FIXPROPERTYNAME_SENDCRASHMAIL ; |
| seqProperties[FIXPROPERTYHANDLE_USEMAILUI ] = FIXPROPERTYNAME_USEMAILUI ; |
| seqProperties[FIXPROPERTYHANDLE_CURRENTTEMPURL ] = FIXPROPERTYNAME_CURRENTTEMPURL ; |
| // seqProperties[FIXPROPERTYHANDLE_REMOVEMENUENTRYCLOSE ] = FIXPROPERTYNAME_REMOVEMENUENTRYCLOSE; |
| // seqProperties[FIXPROPERTYHANDLE_REMOVEMENUENTRYBACKTOWEBTOP ] = FIXPROPERTYNAME_REMOVEMENUENTRYBACKTOWEBTOP; |
| // seqProperties[FIXPROPERTYHANDLE_REMOVEMENUENTRYNEWWEBTOP ] = FIXPROPERTYNAME_REMOVEMENUENTRYNEWWEBTOP; |
| // seqProperties[FIXPROPERTYHANDLE_REMOVEMENUENTRYLOGOUT ] = FIXPROPERTYNAME_REMOVEMENUENTRYLOGOUT; |
| /* |
| sal_uInt32 nPosition = FIXPROPERTYCOUNT; |
| // Add names for recovery list to list. |
| // 3 subkeys for every item! |
| // nPosition is the start point of an list item, nItem an index into right list of node names! |
| for( sal_Int32 nItem=0; nItem<nRecoveryCount; ++nItem ) |
| { |
| seqProperties[nPosition] = PROPERTYNAME_RECOVERYLIST + PATHDELIMITER + seqRecoveryItems[nItem] + PATHDELIMITER + PROPERTYNAME_URL ; |
| ++nPosition; |
| seqProperties[nPosition] = PROPERTYNAME_RECOVERYLIST + PATHDELIMITER + seqRecoveryItems[nItem] + PATHDELIMITER + PROPERTYNAME_FILTER ; |
| ++nPosition; |
| seqProperties[nPosition] = PROPERTYNAME_RECOVERYLIST + PATHDELIMITER + seqRecoveryItems[nItem] + PATHDELIMITER + PROPERTYNAME_TEMPNAME ; |
| ++nPosition; |
| } |
| */ |
| // Return result. |
| return seqProperties; |
| } |
| |
| //***************************************************************************************************************** |
| // initialize static member |
| // DON'T DO IT IN YOUR HEADER! |
| // see definition for further informations |
| //***************************************************************************************************************** |
| SvtInternalOptions_Impl* SvtInternalOptions::m_pDataContainer = NULL ; |
| sal_Int32 SvtInternalOptions::m_nRefCount = 0 ; |
| |
| //***************************************************************************************************************** |
| // constructor |
| //***************************************************************************************************************** |
| SvtInternalOptions::SvtInternalOptions() |
| { |
| // Global access, must be guarded (multithreading!). |
| MutexGuard aGuard( GetOwnStaticMutex() ); |
| // Increase ouer refcount ... |
| ++m_nRefCount; |
| // ... and initialize ouer data container only if it not already! |
| if( m_pDataContainer == NULL ) |
| { |
| RTL_LOGFILE_CONTEXT(aLog, "unotools ( ??? ) ::SvtInternalOptions_Impl::ctor()"); |
| m_pDataContainer = new SvtInternalOptions_Impl(); |
| |
| ItemHolder1::holdConfigItem(E_INTERNALOPTIONS); |
| } |
| } |
| |
| //***************************************************************************************************************** |
| // destructor |
| //***************************************************************************************************************** |
| SvtInternalOptions::~SvtInternalOptions() |
| { |
| // Global access, must be guarded (multithreading!) |
| MutexGuard aGuard( GetOwnStaticMutex() ); |
| // Decrease ouer refcount. |
| --m_nRefCount; |
| // If last instance was deleted ... |
| // we must destroy ouer static data container! |
| if( m_nRefCount <= 0 ) |
| { |
| delete m_pDataContainer; |
| m_pDataContainer = NULL; |
| } |
| } |
| |
| //***************************************************************************************************************** |
| // public method |
| //***************************************************************************************************************** |
| sal_Bool SvtInternalOptions::SlotCFGEnabled() const |
| { |
| MutexGuard aGuard( GetOwnStaticMutex() ); |
| return m_pDataContainer->SlotCFGEnabled(); |
| } |
| |
| //***************************************************************************************************************** |
| // public method |
| //***************************************************************************************************************** |
| sal_Bool SvtInternalOptions::CrashMailEnabled() const |
| { |
| MutexGuard aGuard( GetOwnStaticMutex() ); |
| return m_pDataContainer->CrashMailEnabled(); |
| } |
| |
| //***************************************************************************************************************** |
| // public method |
| //***************************************************************************************************************** |
| sal_Bool SvtInternalOptions::MailUIEnabled() const |
| { |
| MutexGuard aGuard( GetOwnStaticMutex() ); |
| return m_pDataContainer->MailUIEnabled(); |
| } |
| |
| //***************************************************************************************************************** |
| // public methods |
| //***************************************************************************************************************** |
| sal_Bool SvtInternalOptions::IsRemoveMenuEntryClose() const |
| { |
| MutexGuard aGuard( GetOwnStaticMutex() ); |
| return m_pDataContainer->IsRemoveMenuEntryClose(); |
| } |
| |
| sal_Bool SvtInternalOptions::IsRemoveMenuEntryBackToWebtop() const |
| { |
| MutexGuard aGuard( GetOwnStaticMutex() ); |
| return m_pDataContainer->IsRemoveMenuEntryBackToWebtop(); |
| } |
| |
| sal_Bool SvtInternalOptions::IsRemoveMenuEntryNewWebtop() const |
| { |
| MutexGuard aGuard( GetOwnStaticMutex() ); |
| return m_pDataContainer->IsRemoveMenuEntryNewWebtop(); |
| } |
| |
| sal_Bool SvtInternalOptions::IsRemoveMenuEntryLogout() const |
| { |
| MutexGuard aGuard( GetOwnStaticMutex() ); |
| return m_pDataContainer->IsRemoveMenuEntryLogout(); |
| } |
| |
| OUString SvtInternalOptions::GetCurrentTempURL() const |
| { |
| MutexGuard aGuard( GetOwnStaticMutex() ); |
| return m_pDataContainer->GetCurrentTempURL(); |
| } |
| |
| void SvtInternalOptions::SetCurrentTempURL( const OUString& aNewCurrentTempURL ) |
| { |
| MutexGuard aGuard( GetOwnStaticMutex() ); |
| m_pDataContainer->SetCurrentTempURL( aNewCurrentTempURL ); |
| } |
| |
| //***************************************************************************************************************** |
| // private method |
| //***************************************************************************************************************** |
| Mutex& SvtInternalOptions::GetOwnStaticMutex() |
| { |
| // Initialize static mutex only for one time! |
| static Mutex* pMutex = NULL; |
| // If these method first called (Mutex not already exist!) ... |
| if( pMutex == NULL ) |
| { |
| // ... we must create a new one. Protect follow code with the global mutex - |
| // It must be - we create a static variable! |
| MutexGuard aGuard( Mutex::getGlobalMutex() ); |
| // We must check our pointer again - because it can be that another instance of ouer class will be fastr then these! |
| if( pMutex == NULL ) |
| { |
| // Create the new mutex and set it for return on static variable. |
| static Mutex aMutex; |
| pMutex = &aMutex; |
| } |
| } |
| // Return new created or already existing mutex object. |
| return *pMutex; |
| } |