| <?xml version="1.0" encoding="UTF-8"?> |
| <!--*********************************************************** |
| * |
| * Licensed to the Apache Software Foundation (ASF) under one |
| * or more contributor license agreements. See the NOTICE file |
| * distributed with this work for additional information |
| * regarding copyright ownership. The ASF licenses this file |
| * to you under the Apache License, Version 2.0 (the |
| * "License"); you may not use this file except in compliance |
| * with the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, |
| * software distributed under the License is distributed on an |
| * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| * KIND, either express or implied. See the License for the |
| * specific language governing permissions and limitations |
| * under the License. |
| * |
| ***********************************************************--> |
| <!-- |
| *** GENERATED FROM project.xml - DO NOT EDIT *** |
| *** EDIT ../build.xml INSTEAD *** |
| |
| For the purpose of easier reading the script |
| is divided into following sections: |
| |
| - initialization |
| - compilation |
| - jar |
| - execution |
| - debugging |
| - javadoc |
| - junit compilation |
| - junit execution |
| - junit debugging |
| - applet |
| - cleanup |
| |
| --> |
| <project xmlns:j2seproject1="http://www.netbeans.org/ns/j2se-project/1" xmlns:j2seproject3="http://www.netbeans.org/ns/j2se-project/3" xmlns:jaxrpc="http://www.netbeans.org/ns/j2se-project/jax-rpc" basedir=".." default="default" name="ConvwatchGUIProject-impl"> |
| <fail message="Please build using Ant 1.7.1 or higher."> |
| <condition> |
| <not> |
| <antversion atleast="1.7.1"/> |
| </not> |
| </condition> |
| </fail> |
| <target depends="test,jar,javadoc" description="Build and test whole project." name="default"/> |
| <!-- |
| ====================== |
| INITIALIZATION SECTION |
| ====================== |
| --> |
| <target name="-pre-init"> |
| <!-- Empty placeholder for easier customization. --> |
| <!-- You can override this target in the ../build.xml file. --> |
| </target> |
| <target depends="-pre-init" name="-init-private"> |
| <property file="nbproject/private/config.properties"/> |
| <property file="nbproject/private/configs/${config}.properties"/> |
| <property file="nbproject/private/private.properties"/> |
| </target> |
| <target depends="-pre-init,-init-private" name="-init-user"> |
| <property file="${user.properties.file}"/> |
| <!-- The two properties below are usually overridden --> |
| <!-- by the active platform. Just a fallback. --> |
| <property name="default.javac.source" value="1.4"/> |
| <property name="default.javac.target" value="1.4"/> |
| </target> |
| <target depends="-pre-init,-init-private,-init-user" name="-init-project"> |
| <property file="nbproject/configs/${config}.properties"/> |
| <property file="nbproject/project.properties"/> |
| </target> |
| <target depends="-pre-init,-init-private,-init-user,-init-project,-init-macrodef-property" name="-do-init"> |
| <available file="${manifest.file}" property="manifest.available"/> |
| <condition property="main.class.available"> |
| <and> |
| <isset property="main.class"/> |
| <not> |
| <equals arg1="${main.class}" arg2="" trim="true"/> |
| </not> |
| </and> |
| </condition> |
| <condition property="manifest.available+main.class"> |
| <and> |
| <isset property="manifest.available"/> |
| <isset property="main.class.available"/> |
| </and> |
| </condition> |
| <condition property="do.mkdist"> |
| <and> |
| <isset property="libs.CopyLibs.classpath"/> |
| <not> |
| <istrue value="${mkdist.disabled}"/> |
| </not> |
| </and> |
| </condition> |
| <condition property="manifest.available+main.class+mkdist.available"> |
| <and> |
| <istrue value="${manifest.available+main.class}"/> |
| <isset property="do.mkdist"/> |
| </and> |
| </condition> |
| <condition property="manifest.available+mkdist.available"> |
| <and> |
| <istrue value="${manifest.available}"/> |
| <isset property="do.mkdist"/> |
| </and> |
| </condition> |
| <condition property="manifest.available-mkdist.available"> |
| <or> |
| <istrue value="${manifest.available}"/> |
| <isset property="do.mkdist"/> |
| </or> |
| </condition> |
| <condition property="manifest.available+main.class-mkdist.available"> |
| <or> |
| <istrue value="${manifest.available+main.class}"/> |
| <isset property="do.mkdist"/> |
| </or> |
| </condition> |
| <condition property="have.tests"> |
| <or> |
| <available file="${test.src.dir}"/> |
| </or> |
| </condition> |
| <condition property="have.sources"> |
| <or> |
| <available file="${src.dir}"/> |
| </or> |
| </condition> |
| <condition property="netbeans.home+have.tests"> |
| <and> |
| <isset property="netbeans.home"/> |
| <isset property="have.tests"/> |
| </and> |
| </condition> |
| <condition property="no.javadoc.preview"> |
| <and> |
| <isset property="javadoc.preview"/> |
| <isfalse value="${javadoc.preview}"/> |
| </and> |
| </condition> |
| <property name="run.jvmargs" value=""/> |
| <property name="javac.compilerargs" value=""/> |
| <property name="work.dir" value="${basedir}"/> |
| <condition property="no.deps"> |
| <and> |
| <istrue value="${no.dependencies}"/> |
| </and> |
| </condition> |
| <property name="javac.debug" value="true"/> |
| <property name="javadoc.preview" value="true"/> |
| <property name="application.args" value=""/> |
| <property name="source.encoding" value="${file.encoding}"/> |
| <property name="runtime.encoding" value="${source.encoding}"/> |
| <condition property="javadoc.encoding.used" value="${javadoc.encoding}"> |
| <and> |
| <isset property="javadoc.encoding"/> |
| <not> |
| <equals arg1="${javadoc.encoding}" arg2=""/> |
| </not> |
| </and> |
| </condition> |
| <property name="javadoc.encoding.used" value="${source.encoding}"/> |
| <property name="includes" value="**"/> |
| <property name="excludes" value=""/> |
| <property name="do.depend" value="false"/> |
| <condition property="do.depend.true"> |
| <istrue value="${do.depend}"/> |
| </condition> |
| <path id="endorsed.classpath.path" path="${endorsed.classpath}"/> |
| <condition else="" property="endorsed.classpath.cmd.line.arg" value="-Xbootclasspath/p:'${toString:endorsed.classpath.path}'"> |
| <length length="0" string="${endorsed.classpath}" when="greater"/> |
| </condition> |
| <property name="javac.fork" value="false"/> |
| </target> |
| <target name="-post-init"> |
| <!-- Empty placeholder for easier customization. --> |
| <!-- You can override this target in the ../build.xml file. --> |
| </target> |
| <target depends="-pre-init,-init-private,-init-user,-init-project,-do-init" name="-init-check"> |
| <fail unless="src.dir">Must set src.dir</fail> |
| <fail unless="test.src.dir">Must set test.src.dir</fail> |
| <fail unless="build.dir">Must set build.dir</fail> |
| <fail unless="dist.dir">Must set dist.dir</fail> |
| <fail unless="build.classes.dir">Must set build.classes.dir</fail> |
| <fail unless="dist.javadoc.dir">Must set dist.javadoc.dir</fail> |
| <fail unless="build.test.classes.dir">Must set build.test.classes.dir</fail> |
| <fail unless="build.test.results.dir">Must set build.test.results.dir</fail> |
| <fail unless="build.classes.excludes">Must set build.classes.excludes</fail> |
| <fail unless="dist.jar">Must set dist.jar</fail> |
| </target> |
| <target name="-init-macrodef-property"> |
| <macrodef name="property" uri="http://www.netbeans.org/ns/j2se-project/1"> |
| <attribute name="name"/> |
| <attribute name="value"/> |
| <sequential> |
| <property name="@{name}" value="${@{value}}"/> |
| </sequential> |
| </macrodef> |
| </target> |
| <target name="-init-macrodef-javac"> |
| <macrodef name="javac" uri="http://www.netbeans.org/ns/j2se-project/3"> |
| <attribute default="${src.dir}" name="srcdir"/> |
| <attribute default="${build.classes.dir}" name="destdir"/> |
| <attribute default="${javac.classpath}" name="classpath"/> |
| <attribute default="${includes}" name="includes"/> |
| <attribute default="${excludes}" name="excludes"/> |
| <attribute default="${javac.debug}" name="debug"/> |
| <attribute default="${empty.dir}" name="sourcepath"/> |
| <attribute default="${empty.dir}" name="gensrcdir"/> |
| <element name="customize" optional="true"/> |
| <sequential> |
| <property location="${build.dir}/empty" name="empty.dir"/> |
| <mkdir dir="${empty.dir}"/> |
| <javac debug="@{debug}" deprecation="${javac.deprecation}" destdir="@{destdir}" encoding="${source.encoding}" excludes="@{excludes}" fork="${javac.fork}" includeantruntime="false" includes="@{includes}" source="${javac.source}" sourcepath="@{sourcepath}" srcdir="@{srcdir}" target="${javac.target}" tempdir="${java.io.tmpdir}"> |
| <src> |
| <dirset dir="@{gensrcdir}" erroronmissingdir="false"> |
| <include name="*"/> |
| </dirset> |
| </src> |
| <classpath> |
| <path path="@{classpath}"/> |
| </classpath> |
| <compilerarg line="${endorsed.classpath.cmd.line.arg}"/> |
| <compilerarg line="${javac.compilerargs}"/> |
| <customize/> |
| </javac> |
| </sequential> |
| </macrodef> |
| <macrodef name="depend" uri="http://www.netbeans.org/ns/j2se-project/3"> |
| <attribute default="${src.dir}" name="srcdir"/> |
| <attribute default="${build.classes.dir}" name="destdir"/> |
| <attribute default="${javac.classpath}" name="classpath"/> |
| <sequential> |
| <depend cache="${build.dir}/depcache" destdir="@{destdir}" excludes="${excludes}" includes="${includes}" srcdir="@{srcdir}"> |
| <classpath> |
| <path path="@{classpath}"/> |
| </classpath> |
| </depend> |
| </sequential> |
| </macrodef> |
| <macrodef name="force-recompile" uri="http://www.netbeans.org/ns/j2se-project/3"> |
| <attribute default="${build.classes.dir}" name="destdir"/> |
| <sequential> |
| <fail unless="javac.includes">Must set javac.includes</fail> |
| <pathconvert pathsep="," property="javac.includes.binary"> |
| <path> |
| <filelist dir="@{destdir}" files="${javac.includes}"/> |
| </path> |
| <globmapper from="*.java" to="*.class"/> |
| </pathconvert> |
| <delete> |
| <files includes="${javac.includes.binary}"/> |
| </delete> |
| </sequential> |
| </macrodef> |
| </target> |
| <target name="-init-macrodef-junit"> |
| <macrodef name="junit" uri="http://www.netbeans.org/ns/j2se-project/3"> |
| <attribute default="${includes}" name="includes"/> |
| <attribute default="${excludes}" name="excludes"/> |
| <attribute default="**" name="testincludes"/> |
| <sequential> |
| <junit dir="${work.dir}" errorproperty="tests.failed" failureproperty="tests.failed" fork="true" showoutput="true" tempdir="${build.dir}"> |
| <batchtest todir="${build.test.results.dir}"> |
| <fileset dir="${test.src.dir}" excludes="@{excludes},${excludes}" includes="@{includes}"> |
| <filename name="@{testincludes}"/> |
| </fileset> |
| </batchtest> |
| <classpath> |
| <path path="${run.test.classpath}"/> |
| </classpath> |
| <syspropertyset> |
| <propertyref prefix="test-sys-prop."/> |
| <mapper from="test-sys-prop.*" to="*" type="glob"/> |
| </syspropertyset> |
| <formatter type="brief" usefile="false"/> |
| <formatter type="xml"/> |
| <jvmarg line="${endorsed.classpath.cmd.line.arg}"/> |
| <jvmarg line="${run.jvmargs}"/> |
| </junit> |
| </sequential> |
| </macrodef> |
| </target> |
| <target depends="-init-debug-args" name="-init-macrodef-nbjpda"> |
| <macrodef name="nbjpdastart" uri="http://www.netbeans.org/ns/j2se-project/1"> |
| <attribute default="${main.class}" name="name"/> |
| <attribute default="${debug.classpath}" name="classpath"/> |
| <attribute default="" name="stopclassname"/> |
| <sequential> |
| <nbjpdastart addressproperty="jpda.address" name="@{name}" stopclassname="@{stopclassname}" transport="${debug-transport}"> |
| <classpath> |
| <path path="@{classpath}"/> |
| </classpath> |
| </nbjpdastart> |
| </sequential> |
| </macrodef> |
| <macrodef name="nbjpdareload" uri="http://www.netbeans.org/ns/j2se-project/1"> |
| <attribute default="${build.classes.dir}" name="dir"/> |
| <sequential> |
| <nbjpdareload> |
| <fileset dir="@{dir}" includes="${fix.classes}"> |
| <include name="${fix.includes}*.class"/> |
| </fileset> |
| </nbjpdareload> |
| </sequential> |
| </macrodef> |
| </target> |
| <target name="-init-debug-args"> |
| <property name="version-output" value="java version "${ant.java.version}"/> |
| <condition property="have-jdk-older-than-1.4"> |
| <or> |
| <contains string="${version-output}" substring="java version "1.0"/> |
| <contains string="${version-output}" substring="java version "1.1"/> |
| <contains string="${version-output}" substring="java version "1.2"/> |
| <contains string="${version-output}" substring="java version "1.3"/> |
| </or> |
| </condition> |
| <condition else="-Xdebug" property="debug-args-line" value="-Xdebug -Xnoagent -Djava.compiler=none"> |
| <istrue value="${have-jdk-older-than-1.4}"/> |
| </condition> |
| <condition else="dt_socket" property="debug-transport-by-os" value="dt_shmem"> |
| <os family="windows"/> |
| </condition> |
| <condition else="${debug-transport-by-os}" property="debug-transport" value="${debug.transport}"> |
| <isset property="debug.transport"/> |
| </condition> |
| </target> |
| <target depends="-init-debug-args" name="-init-macrodef-debug"> |
| <macrodef name="debug" uri="http://www.netbeans.org/ns/j2se-project/3"> |
| <attribute default="${main.class}" name="classname"/> |
| <attribute default="${debug.classpath}" name="classpath"/> |
| <element name="customize" optional="true"/> |
| <sequential> |
| <java classname="@{classname}" dir="${work.dir}" fork="true"> |
| <jvmarg line="${endorsed.classpath.cmd.line.arg}"/> |
| <jvmarg line="${debug-args-line}"/> |
| <jvmarg value="-Xrunjdwp:transport=${debug-transport},address=${jpda.address}"/> |
| <jvmarg value="-Dfile.encoding=${runtime.encoding}"/> |
| <redirector errorencoding="${runtime.encoding}" inputencoding="${runtime.encoding}" outputencoding="${runtime.encoding}"/> |
| <jvmarg line="${run.jvmargs}"/> |
| <classpath> |
| <path path="@{classpath}"/> |
| </classpath> |
| <syspropertyset> |
| <propertyref prefix="run-sys-prop."/> |
| <mapper from="run-sys-prop.*" to="*" type="glob"/> |
| </syspropertyset> |
| <customize/> |
| </java> |
| </sequential> |
| </macrodef> |
| </target> |
| <target name="-init-macrodef-java"> |
| <macrodef name="java" uri="http://www.netbeans.org/ns/j2se-project/1"> |
| <attribute default="${main.class}" name="classname"/> |
| <attribute default="${run.classpath}" name="classpath"/> |
| <element name="customize" optional="true"/> |
| <sequential> |
| <java classname="@{classname}" dir="${work.dir}" fork="true"> |
| <jvmarg line="${endorsed.classpath.cmd.line.arg}"/> |
| <jvmarg value="-Dfile.encoding=${runtime.encoding}"/> |
| <redirector errorencoding="${runtime.encoding}" inputencoding="${runtime.encoding}" outputencoding="${runtime.encoding}"/> |
| <jvmarg line="${run.jvmargs}"/> |
| <classpath> |
| <path path="@{classpath}"/> |
| </classpath> |
| <syspropertyset> |
| <propertyref prefix="run-sys-prop."/> |
| <mapper from="run-sys-prop.*" to="*" type="glob"/> |
| </syspropertyset> |
| <customize/> |
| </java> |
| </sequential> |
| </macrodef> |
| </target> |
| <target name="-init-presetdef-jar"> |
| <presetdef name="jar" uri="http://www.netbeans.org/ns/j2se-project/1"> |
| <jar compress="${jar.compress}" jarfile="${dist.jar}"> |
| <j2seproject1:fileset dir="${build.classes.dir}"/> |
| </jar> |
| </presetdef> |
| </target> |
| <target depends="-pre-init,-init-private,-init-user,-init-project,-do-init,-post-init,-init-check,-init-macrodef-property,-init-macrodef-javac,-init-macrodef-junit,-init-macrodef-nbjpda,-init-macrodef-debug,-init-macrodef-java,-init-presetdef-jar" name="init"/> |
| <!-- |
| =================== |
| COMPILATION SECTION |
| =================== |
| --> |
| <target name="-deps-jar-init" unless="built-jar.properties"> |
| <property location="${build.dir}/built-jar.properties" name="built-jar.properties"/> |
| <delete file="${built-jar.properties}" quiet="true"/> |
| </target> |
| <target if="already.built.jar.${basedir}" name="-warn-already-built-jar"> |
| <echo level="warn" message="Cycle detected: ConvwatchGUIProject was already built"/> |
| </target> |
| <target depends="init,-deps-jar-init" name="deps-jar" unless="no.deps"> |
| <mkdir dir="${build.dir}"/> |
| <touch file="${built-jar.properties}" verbose="false"/> |
| <property file="${built-jar.properties}" prefix="already.built.jar."/> |
| <antcall target="-warn-already-built-jar"/> |
| <propertyfile file="${built-jar.properties}"> |
| <entry key="${basedir}" value=""/> |
| </propertyfile> |
| </target> |
| <target depends="init,-check-automatic-build,-clean-after-automatic-build" name="-verify-automatic-build"/> |
| <target depends="init" name="-check-automatic-build"> |
| <available file="${build.classes.dir}/.netbeans_automatic_build" property="netbeans.automatic.build"/> |
| </target> |
| <target depends="init" if="netbeans.automatic.build" name="-clean-after-automatic-build"> |
| <antcall target="clean"/> |
| </target> |
| <target depends="init,deps-jar" name="-pre-pre-compile"> |
| <mkdir dir="${build.classes.dir}"/> |
| </target> |
| <target name="-pre-compile"> |
| <!-- Empty placeholder for easier customization. --> |
| <!-- You can override this target in the ../build.xml file. --> |
| </target> |
| <target if="do.depend.true" name="-compile-depend"> |
| <pathconvert property="build.generated.subdirs"> |
| <dirset dir="${build.generated.sources.dir}" erroronmissingdir="false"> |
| <include name="*"/> |
| </dirset> |
| </pathconvert> |
| <j2seproject3:depend srcdir="${src.dir}:${build.generated.subdirs}"/> |
| </target> |
| <target depends="init,deps-jar,-pre-pre-compile,-pre-compile,-compile-depend" if="have.sources" name="-do-compile"> |
| <j2seproject3:javac gensrcdir="${build.generated.sources.dir}"/> |
| <copy todir="${build.classes.dir}"> |
| <fileset dir="${src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/> |
| </copy> |
| </target> |
| <target name="-post-compile"> |
| <!-- Empty placeholder for easier customization. --> |
| <!-- You can override this target in the ../build.xml file. --> |
| </target> |
| <target depends="init,deps-jar,-verify-automatic-build,-pre-pre-compile,-pre-compile,-do-compile,-post-compile" description="Compile project." name="compile"/> |
| <target name="-pre-compile-single"> |
| <!-- Empty placeholder for easier customization. --> |
| <!-- You can override this target in the ../build.xml file. --> |
| </target> |
| <target depends="init,deps-jar,-pre-pre-compile" name="-do-compile-single"> |
| <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail> |
| <j2seproject3:force-recompile/> |
| <j2seproject3:javac excludes="" gensrcdir="${build.generated.sources.dir}" includes="${javac.includes}" sourcepath="${src.dir}"/> |
| </target> |
| <target name="-post-compile-single"> |
| <!-- Empty placeholder for easier customization. --> |
| <!-- You can override this target in the ../build.xml file. --> |
| </target> |
| <target depends="init,deps-jar,-verify-automatic-build,-pre-pre-compile,-pre-compile-single,-do-compile-single,-post-compile-single" name="compile-single"/> |
| <!-- |
| ==================== |
| JAR BUILDING SECTION |
| ==================== |
| --> |
| <target depends="init" name="-pre-pre-jar"> |
| <dirname file="${dist.jar}" property="dist.jar.dir"/> |
| <mkdir dir="${dist.jar.dir}"/> |
| </target> |
| <target name="-pre-jar"> |
| <!-- Empty placeholder for easier customization. --> |
| <!-- You can override this target in the ../build.xml file. --> |
| </target> |
| <target depends="init,compile,-pre-pre-jar,-pre-jar" name="-do-jar-without-manifest" unless="manifest.available-mkdist.available"> |
| <j2seproject1:jar/> |
| </target> |
| <target depends="init,compile,-pre-pre-jar,-pre-jar" if="manifest.available" name="-do-jar-with-manifest" unless="manifest.available+main.class-mkdist.available"> |
| <j2seproject1:jar manifest="${manifest.file}"/> |
| </target> |
| <target depends="init,compile,-pre-pre-jar,-pre-jar" if="manifest.available+main.class" name="-do-jar-with-mainclass" unless="manifest.available+main.class+mkdist.available"> |
| <j2seproject1:jar manifest="${manifest.file}"> |
| <j2seproject1:manifest> |
| <j2seproject1:attribute name="Main-Class" value="${main.class}"/> |
| </j2seproject1:manifest> |
| </j2seproject1:jar> |
| <echo>To run this application from the command line without Ant, try:</echo> |
| <property location="${build.classes.dir}" name="build.classes.dir.resolved"/> |
| <property location="${dist.jar}" name="dist.jar.resolved"/> |
| <pathconvert property="run.classpath.with.dist.jar"> |
| <path path="${run.classpath}"/> |
| <map from="${build.classes.dir.resolved}" to="${dist.jar.resolved}"/> |
| </pathconvert> |
| <echo>java -cp "${run.classpath.with.dist.jar}" ${main.class}</echo> |
| </target> |
| <target depends="init,compile,-pre-pre-jar,-pre-jar" if="manifest.available+main.class+mkdist.available" name="-do-jar-with-libraries"> |
| <property location="${build.classes.dir}" name="build.classes.dir.resolved"/> |
| <pathconvert property="run.classpath.without.build.classes.dir"> |
| <path path="${run.classpath}"/> |
| <map from="${build.classes.dir.resolved}" to=""/> |
| </pathconvert> |
| <pathconvert pathsep=" " property="jar.classpath"> |
| <path path="${run.classpath.without.build.classes.dir}"/> |
| <chainedmapper> |
| <flattenmapper/> |
| <globmapper from="*" to="lib/*"/> |
| </chainedmapper> |
| </pathconvert> |
| <taskdef classname="org.netbeans.modules.java.j2seproject.copylibstask.CopyLibs" classpath="${libs.CopyLibs.classpath}" name="copylibs"/> |
| <copylibs compress="${jar.compress}" jarfile="${dist.jar}" manifest="${manifest.file}" runtimeclasspath="${run.classpath.without.build.classes.dir}"> |
| <fileset dir="${build.classes.dir}"/> |
| <manifest> |
| <attribute name="Main-Class" value="${main.class}"/> |
| <attribute name="Class-Path" value="${jar.classpath}"/> |
| </manifest> |
| </copylibs> |
| <echo>To run this application from the command line without Ant, try:</echo> |
| <property location="${dist.jar}" name="dist.jar.resolved"/> |
| <echo>java -jar "${dist.jar.resolved}"</echo> |
| </target> |
| <target depends="init,compile,-pre-pre-jar,-pre-jar" if="manifest.available+mkdist.available" name="-do-jar-with-libraries-without-mainclass" unless="main.class.available"> |
| <property location="${build.classes.dir}" name="build.classes.dir.resolved"/> |
| <pathconvert property="run.classpath.without.build.classes.dir"> |
| <path path="${run.classpath}"/> |
| <map from="${build.classes.dir.resolved}" to=""/> |
| </pathconvert> |
| <pathconvert pathsep=" " property="jar.classpath"> |
| <path path="${run.classpath.without.build.classes.dir}"/> |
| <chainedmapper> |
| <flattenmapper/> |
| <globmapper from="*" to="lib/*"/> |
| </chainedmapper> |
| </pathconvert> |
| <taskdef classname="org.netbeans.modules.java.j2seproject.copylibstask.CopyLibs" classpath="${libs.CopyLibs.classpath}" name="copylibs"/> |
| <copylibs compress="${jar.compress}" jarfile="${dist.jar}" manifest="${manifest.file}" runtimeclasspath="${run.classpath.without.build.classes.dir}"> |
| <fileset dir="${build.classes.dir}"/> |
| <manifest> |
| <attribute name="Class-Path" value="${jar.classpath}"/> |
| </manifest> |
| </copylibs> |
| </target> |
| <target depends="init,compile,-pre-pre-jar,-pre-jar" if="do.mkdist" name="-do-jar-with-libraries-without-manifest" unless="manifest.available"> |
| <property location="${build.classes.dir}" name="build.classes.dir.resolved"/> |
| <pathconvert property="run.classpath.without.build.classes.dir"> |
| <path path="${run.classpath}"/> |
| <map from="${build.classes.dir.resolved}" to=""/> |
| </pathconvert> |
| <pathconvert pathsep=" " property="jar.classpath"> |
| <path path="${run.classpath.without.build.classes.dir}"/> |
| <chainedmapper> |
| <flattenmapper/> |
| <globmapper from="*" to="lib/*"/> |
| </chainedmapper> |
| </pathconvert> |
| <taskdef classname="org.netbeans.modules.java.j2seproject.copylibstask.CopyLibs" classpath="${libs.CopyLibs.classpath}" name="copylibs"/> |
| <copylibs compress="${jar.compress}" jarfile="${dist.jar}" runtimeclasspath="${run.classpath.without.build.classes.dir}"> |
| <fileset dir="${build.classes.dir}"/> |
| <manifest> |
| <attribute name="Class-Path" value="${jar.classpath}"/> |
| </manifest> |
| </copylibs> |
| </target> |
| <target name="-post-jar"> |
| <!-- Empty placeholder for easier customization. --> |
| <!-- You can override this target in the ../build.xml file. --> |
| </target> |
| <target depends="init,compile,-pre-jar,-do-jar-with-manifest,-do-jar-without-manifest,-do-jar-with-mainclass,-do-jar-with-libraries,-do-jar-with-libraries-without-mainclass,-do-jar-with-libraries-without-manifest,-post-jar" description="Build JAR." name="jar"/> |
| <!-- |
| ================= |
| EXECUTION SECTION |
| ================= |
| --> |
| <target depends="init,compile" description="Run a main class." name="run"> |
| <j2seproject1:java> |
| <customize> |
| <arg line="${application.args}"/> |
| </customize> |
| </j2seproject1:java> |
| </target> |
| <target name="-do-not-recompile"> |
| <property name="javac.includes.binary" value=""/> |
| </target> |
| <target depends="init,compile-single" name="run-single"> |
| <fail unless="run.class">Must select one file in the IDE or set run.class</fail> |
| <j2seproject1:java classname="${run.class}"/> |
| </target> |
| <target depends="init,compile-test-single" name="run-test-with-main"> |
| <fail unless="run.class">Must select one file in the IDE or set run.class</fail> |
| <j2seproject1:java classname="${run.class}" classpath="${run.test.classpath}"/> |
| </target> |
| <!-- |
| ================= |
| DEBUGGING SECTION |
| ================= |
| --> |
| <target depends="init" if="netbeans.home" name="-debug-start-debugger"> |
| <j2seproject1:nbjpdastart name="${debug.class}"/> |
| </target> |
| <target depends="init" if="netbeans.home" name="-debug-start-debugger-main-test"> |
| <j2seproject1:nbjpdastart classpath="${debug.test.classpath}" name="${debug.class}"/> |
| </target> |
| <target depends="init,compile" name="-debug-start-debuggee"> |
| <j2seproject3:debug> |
| <customize> |
| <arg line="${application.args}"/> |
| </customize> |
| </j2seproject3:debug> |
| </target> |
| <target depends="init,compile,-debug-start-debugger,-debug-start-debuggee" description="Debug project in IDE." if="netbeans.home" name="debug"/> |
| <target depends="init" if="netbeans.home" name="-debug-start-debugger-stepinto"> |
| <j2seproject1:nbjpdastart stopclassname="${main.class}"/> |
| </target> |
| <target depends="init,compile,-debug-start-debugger-stepinto,-debug-start-debuggee" if="netbeans.home" name="debug-stepinto"/> |
| <target depends="init,compile-single" if="netbeans.home" name="-debug-start-debuggee-single"> |
| <fail unless="debug.class">Must select one file in the IDE or set debug.class</fail> |
| <j2seproject3:debug classname="${debug.class}"/> |
| </target> |
| <target depends="init,compile-single,-debug-start-debugger,-debug-start-debuggee-single" if="netbeans.home" name="debug-single"/> |
| <target depends="init,compile-test-single" if="netbeans.home" name="-debug-start-debuggee-main-test"> |
| <fail unless="debug.class">Must select one file in the IDE or set debug.class</fail> |
| <j2seproject3:debug classname="${debug.class}" classpath="${debug.test.classpath}"/> |
| </target> |
| <target depends="init,compile-test-single,-debug-start-debugger-main-test,-debug-start-debuggee-main-test" if="netbeans.home" name="debug-test-with-main"/> |
| <target depends="init" name="-pre-debug-fix"> |
| <fail unless="fix.includes">Must set fix.includes</fail> |
| <property name="javac.includes" value="${fix.includes}.java"/> |
| </target> |
| <target depends="init,-pre-debug-fix,compile-single" if="netbeans.home" name="-do-debug-fix"> |
| <j2seproject1:nbjpdareload/> |
| </target> |
| <target depends="init,-pre-debug-fix,-do-debug-fix" if="netbeans.home" name="debug-fix"/> |
| <!-- |
| =============== |
| JAVADOC SECTION |
| =============== |
| --> |
| <target depends="init" name="-javadoc-build"> |
| <mkdir dir="${dist.javadoc.dir}"/> |
| <javadoc additionalparam="${javadoc.additionalparam}" author="${javadoc.author}" charset="UTF-8" destdir="${dist.javadoc.dir}" docencoding="UTF-8" encoding="${javadoc.encoding.used}" failonerror="true" noindex="${javadoc.noindex}" nonavbar="${javadoc.nonavbar}" notree="${javadoc.notree}" private="${javadoc.private}" source="${javac.source}" splitindex="${javadoc.splitindex}" use="${javadoc.use}" useexternalfile="true" version="${javadoc.version}" windowtitle="${javadoc.windowtitle}"> |
| <classpath> |
| <path path="${javac.classpath}"/> |
| </classpath> |
| <fileset dir="${src.dir}" excludes="${excludes}" includes="${includes}"> |
| <filename name="**/*.java"/> |
| </fileset> |
| <fileset dir="${build.generated.sources.dir}" erroronmissingdir="false"> |
| <include name="**/*.java"/> |
| </fileset> |
| </javadoc> |
| </target> |
| <target depends="init,-javadoc-build" if="netbeans.home" name="-javadoc-browse" unless="no.javadoc.preview"> |
| <nbbrowse file="${dist.javadoc.dir}/index.html"/> |
| </target> |
| <target depends="init,-javadoc-build,-javadoc-browse" description="Build Javadoc." name="javadoc"/> |
| <!-- |
| ========================= |
| JUNIT COMPILATION SECTION |
| ========================= |
| --> |
| <target depends="init,compile" if="have.tests" name="-pre-pre-compile-test"> |
| <mkdir dir="${build.test.classes.dir}"/> |
| </target> |
| <target name="-pre-compile-test"> |
| <!-- Empty placeholder for easier customization. --> |
| <!-- You can override this target in the ../build.xml file. --> |
| </target> |
| <target if="do.depend.true" name="-compile-test-depend"> |
| <j2seproject3:depend classpath="${javac.test.classpath}" destdir="${build.test.classes.dir}" srcdir="${test.src.dir}"/> |
| </target> |
| <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test,-compile-test-depend" if="have.tests" name="-do-compile-test"> |
| <j2seproject3:javac classpath="${javac.test.classpath}" debug="true" destdir="${build.test.classes.dir}" srcdir="${test.src.dir}"/> |
| <copy todir="${build.test.classes.dir}"> |
| <fileset dir="${test.src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/> |
| </copy> |
| </target> |
| <target name="-post-compile-test"> |
| <!-- Empty placeholder for easier customization. --> |
| <!-- You can override this target in the ../build.xml file. --> |
| </target> |
| <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test,-do-compile-test,-post-compile-test" name="compile-test"/> |
| <target name="-pre-compile-test-single"> |
| <!-- Empty placeholder for easier customization. --> |
| <!-- You can override this target in the ../build.xml file. --> |
| </target> |
| <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single" if="have.tests" name="-do-compile-test-single"> |
| <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail> |
| <j2seproject3:force-recompile destdir="${build.test.classes.dir}"/> |
| <j2seproject3:javac classpath="${javac.test.classpath}" debug="true" destdir="${build.test.classes.dir}" excludes="" includes="${javac.includes}" sourcepath="${test.src.dir}" srcdir="${test.src.dir}"/> |
| <copy todir="${build.test.classes.dir}"> |
| <fileset dir="${test.src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/> |
| </copy> |
| </target> |
| <target name="-post-compile-test-single"> |
| <!-- Empty placeholder for easier customization. --> |
| <!-- You can override this target in the ../build.xml file. --> |
| </target> |
| <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single,-do-compile-test-single,-post-compile-test-single" name="compile-test-single"/> |
| <!-- |
| ======================= |
| JUNIT EXECUTION SECTION |
| ======================= |
| --> |
| <target depends="init" if="have.tests" name="-pre-test-run"> |
| <mkdir dir="${build.test.results.dir}"/> |
| </target> |
| <target depends="init,compile-test,-pre-test-run" if="have.tests" name="-do-test-run"> |
| <j2seproject3:junit testincludes="**/*Test.java"/> |
| </target> |
| <target depends="init,compile-test,-pre-test-run,-do-test-run" if="have.tests" name="-post-test-run"> |
| <fail if="tests.failed" unless="ignore.failing.tests">Some tests failed; see details above.</fail> |
| </target> |
| <target depends="init" if="have.tests" name="test-report"/> |
| <target depends="init" if="netbeans.home+have.tests" name="-test-browse"/> |
| <target depends="init,compile-test,-pre-test-run,-do-test-run,test-report,-post-test-run,-test-browse" description="Run unit tests." name="test"/> |
| <target depends="init" if="have.tests" name="-pre-test-run-single"> |
| <mkdir dir="${build.test.results.dir}"/> |
| </target> |
| <target depends="init,compile-test-single,-pre-test-run-single" if="have.tests" name="-do-test-run-single"> |
| <fail unless="test.includes">Must select some files in the IDE or set test.includes</fail> |
| <j2seproject3:junit excludes="" includes="${test.includes}"/> |
| </target> |
| <target depends="init,compile-test-single,-pre-test-run-single,-do-test-run-single" if="have.tests" name="-post-test-run-single"> |
| <fail if="tests.failed" unless="ignore.failing.tests">Some tests failed; see details above.</fail> |
| </target> |
| <target depends="init,compile-test-single,-pre-test-run-single,-do-test-run-single,-post-test-run-single" description="Run single unit test." name="test-single"/> |
| <!-- |
| ======================= |
| JUNIT DEBUGGING SECTION |
| ======================= |
| --> |
| <target depends="init,compile-test" if="have.tests" name="-debug-start-debuggee-test"> |
| <fail unless="test.class">Must select one file in the IDE or set test.class</fail> |
| <property location="${build.test.results.dir}/TEST-${test.class}.xml" name="test.report.file"/> |
| <delete file="${test.report.file}"/> |
| <mkdir dir="${build.test.results.dir}"/> |
| <j2seproject3:debug classname="org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner" classpath="${ant.home}/lib/ant.jar:${ant.home}/lib/ant-junit.jar:${debug.test.classpath}"> |
| <customize> |
| <syspropertyset> |
| <propertyref prefix="test-sys-prop."/> |
| <mapper from="test-sys-prop.*" to="*" type="glob"/> |
| </syspropertyset> |
| <arg value="${test.class}"/> |
| <arg value="showoutput=true"/> |
| <arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.BriefJUnitResultFormatter"/> |
| <arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.XMLJUnitResultFormatter,${test.report.file}"/> |
| </customize> |
| </j2seproject3:debug> |
| </target> |
| <target depends="init,compile-test" if="netbeans.home+have.tests" name="-debug-start-debugger-test"> |
| <j2seproject1:nbjpdastart classpath="${debug.test.classpath}" name="${test.class}"/> |
| </target> |
| <target depends="init,compile-test-single,-debug-start-debugger-test,-debug-start-debuggee-test" name="debug-test"/> |
| <target depends="init,-pre-debug-fix,compile-test-single" if="netbeans.home" name="-do-debug-fix-test"> |
| <j2seproject1:nbjpdareload dir="${build.test.classes.dir}"/> |
| </target> |
| <target depends="init,-pre-debug-fix,-do-debug-fix-test" if="netbeans.home" name="debug-fix-test"/> |
| <!-- |
| ========================= |
| APPLET EXECUTION SECTION |
| ========================= |
| --> |
| <target depends="init,compile-single" name="run-applet"> |
| <fail unless="applet.url">Must select one file in the IDE or set applet.url</fail> |
| <j2seproject1:java classname="sun.applet.AppletViewer"> |
| <customize> |
| <arg value="${applet.url}"/> |
| </customize> |
| </j2seproject1:java> |
| </target> |
| <!-- |
| ========================= |
| APPLET DEBUGGING SECTION |
| ========================= |
| --> |
| <target depends="init,compile-single" if="netbeans.home" name="-debug-start-debuggee-applet"> |
| <fail unless="applet.url">Must select one file in the IDE or set applet.url</fail> |
| <j2seproject3:debug classname="sun.applet.AppletViewer"> |
| <customize> |
| <arg value="${applet.url}"/> |
| </customize> |
| </j2seproject3:debug> |
| </target> |
| <target depends="init,compile-single,-debug-start-debugger,-debug-start-debuggee-applet" if="netbeans.home" name="debug-applet"/> |
| <!-- |
| =============== |
| CLEANUP SECTION |
| =============== |
| --> |
| <target name="-deps-clean-init" unless="built-clean.properties"> |
| <property location="${build.dir}/built-clean.properties" name="built-clean.properties"/> |
| <delete file="${built-clean.properties}" quiet="true"/> |
| </target> |
| <target if="already.built.clean.${basedir}" name="-warn-already-built-clean"> |
| <echo level="warn" message="Cycle detected: ConvwatchGUIProject was already built"/> |
| </target> |
| <target depends="init,-deps-clean-init" name="deps-clean" unless="no.deps"> |
| <mkdir dir="${build.dir}"/> |
| <touch file="${built-clean.properties}" verbose="false"/> |
| <property file="${built-clean.properties}" prefix="already.built.clean."/> |
| <antcall target="-warn-already-built-clean"/> |
| <propertyfile file="${built-clean.properties}"> |
| <entry key="${basedir}" value=""/> |
| </propertyfile> |
| </target> |
| <target depends="init" name="-do-clean"> |
| <delete dir="${build.dir}"/> |
| <delete dir="${dist.dir}" followsymlinks="false" includeemptydirs="true"/> |
| </target> |
| <target name="-post-clean"> |
| <!-- Empty placeholder for easier customization. --> |
| <!-- You can override this target in the ../build.xml file. --> |
| </target> |
| <target depends="init,deps-clean,-do-clean,-post-clean" description="Clean build products." name="clean"/> |
| <target name="-check-call-dep"> |
| <property file="${call.built.properties}" prefix="already.built."/> |
| <condition property="should.call.dep"> |
| <not> |
| <isset property="already.built.${call.subproject}"/> |
| </not> |
| </condition> |
| </target> |
| <target depends="-check-call-dep" if="should.call.dep" name="-maybe-call-dep"> |
| <ant antfile="${call.script}" inheritall="false" target="${call.target}"> |
| <propertyset> |
| <propertyref prefix="transfer."/> |
| <mapper from="transfer.*" to="*" type="glob"/> |
| </propertyset> |
| </ant> |
| </target> |
| </project> |
