| /************************************************************** |
| * |
| * Licensed to the Apache Software Foundation (ASF) under one |
| * or more contributor license agreements. See the NOTICE file |
| * distributed with this work for additional information |
| * regarding copyright ownership. The ASF licenses this file |
| * to you under the Apache License, Version 2.0 (the |
| * "License"); you may not use this file except in compliance |
| * with the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, |
| * software distributed under the License is distributed on an |
| * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| * KIND, either express or implied. See the License for the |
| * specific language governing permissions and limitations |
| * under the License. |
| * |
| *************************************************************/ |
| |
| |
| |
| // MARKER(update_precomp.py): autogen include statement, do not remove |
| #include "precompiled_sw.hxx" |
| |
| |
| #include "cmdid.h" |
| #include "hintids.hxx" |
| #include <editeng/sizeitem.hxx> |
| #include <editeng/brshitem.hxx> |
| #include <sfx2/app.hxx> |
| #include <sfx2/request.hxx> |
| #include <sfx2/objface.hxx> |
| #include <sfx2/bindings.hxx> |
| #include <svl/stritem.hxx> |
| #include <svl/eitem.hxx> |
| #include <tools/urlobj.hxx> |
| #include <svl/whiter.hxx> |
| #include <svl/intitem.hxx> |
| #include <tools/shl.hxx> |
| #include <svl/srchitem.hxx> |
| |
| // --> FME 2005-01-04 #i35572# |
| #include <numrule.hxx> |
| // <-- |
| #include <fmtornt.hxx> |
| #include "wrtsh.hxx" |
| #include "swmodule.hxx" |
| #include "frmatr.hxx" |
| #include "helpid.h" |
| #include "globals.hrc" |
| #include "shells.hrc" |
| #include "uinums.hxx" |
| #include "listsh.hxx" |
| #include "poolfmt.hxx" |
| #include "view.hxx" |
| #include "edtwin.hxx" |
| |
| #define SwListShell |
| #include <sfx2/msg.hxx> |
| #include "swslots.hxx" |
| |
| #include <IDocumentOutlineNodes.hxx> |
| |
| SFX_IMPL_INTERFACE(SwListShell, SwBaseShell, SW_RES(STR_SHELLNAME_LIST)) |
| { |
| SFX_OBJECTBAR_REGISTRATION(SFX_OBJECTBAR_OBJECT, SW_RES(RID_NUM_TOOLBOX)); |
| } |
| |
| |
| TYPEINIT1(SwListShell,SwBaseShell) |
| |
| // --> FME 2005-01-04 #i35572# Functionality of Numbering/Bullet toolbar |
| // for outline numbered paragraphs should match the functions for outlines |
| // available in the navigator. Therefore the code in the following |
| // function is quite similar the the code in SwContentTree::ExecCommand. |
| void lcl_OutlineUpDownWithSubPoints( SwWrtShell& rSh, bool bMove, bool bUp ) |
| { |
| const sal_uInt16 nActPos = rSh.GetOutlinePos(); |
| if ( nActPos < USHRT_MAX && rSh.IsOutlineMovable( nActPos ) ) |
| { |
| rSh.Push(); |
| rSh.MakeOutlineSel( nActPos, nActPos, sal_True ); |
| |
| if ( bMove ) |
| { |
| const IDocumentOutlineNodes* pIDoc( rSh.getIDocumentOutlineNodesAccess() ); |
| const sal_uInt16 nActLevel = static_cast<sal_uInt16>(pIDoc->getOutlineLevel( nActPos )); |
| sal_uInt16 nActEndPos = nActPos + 1; |
| sal_Int16 nDir = 0; |
| |
| if ( !bUp ) |
| { |
| // Move down with subpoints: |
| while ( nActEndPos < pIDoc->getOutlineNodesCount() && |
| pIDoc->getOutlineLevel( nActEndPos ) > nActLevel ) |
| ++nActEndPos; |
| |
| if ( nActEndPos < pIDoc->getOutlineNodesCount() ) |
| { |
| // The current subpoint which should be moved |
| // starts at nActPos and ends at nActEndPos - 1 |
| --nActEndPos; |
| sal_uInt16 nDest = nActEndPos + 2; |
| while ( nDest < pIDoc->getOutlineNodesCount() && |
| pIDoc->getOutlineLevel( nDest ) > nActLevel ) |
| ++nDest; |
| |
| nDir = nDest - 1 - nActEndPos; |
| } |
| } |
| else |
| { |
| // Move up with subpoints: |
| if ( nActPos > 0 ) |
| { |
| --nActEndPos; |
| sal_uInt16 nDest = nActPos - 1; |
| while ( nDest > 0 && pIDoc->getOutlineLevel( nDest ) > nActLevel ) |
| --nDest; |
| |
| nDir = nDest - nActPos; |
| } |
| } |
| |
| if ( nDir ) |
| { |
| rSh.MoveOutlinePara( nDir ); |
| rSh.GotoOutline( nActPos + nDir ); |
| } |
| } |
| else |
| { |
| // Up/down with subpoints: |
| rSh.OutlineUpDown( bUp ? -1 : 1 ); |
| } |
| |
| rSh.ClearMark(); |
| rSh.Pop( sal_False ); |
| } |
| } |
| // <-- |
| |
| void SwListShell::Execute(SfxRequest &rReq) |
| { |
| const SfxItemSet* pArgs = rReq.GetArgs(); |
| sal_uInt16 nSlot = rReq.GetSlot(); |
| SwWrtShell& rSh = GetShell(); |
| |
| // --> FME 2005-01-04 #i35572# |
| const SwNumRule* pCurRule = rSh.GetCurNumRule(); |
| ASSERT( pCurRule, "SwListShell::Execute without NumRule" ) |
| bool bOutline = pCurRule && pCurRule->IsOutlineRule(); |
| // <-- |
| |
| switch (nSlot) |
| { |
| case FN_NUM_BULLET_DOWN: |
| case FN_NUM_BULLET_UP: |
| { |
| SfxViewFrame * pFrame = GetView().GetViewFrame(); |
| |
| rReq.Done(); |
| rSh.NumUpDown( ( nSlot == FN_NUM_BULLET_DOWN ) |
| ? sal_True |
| : sal_False ); |
| pFrame->GetBindings().Invalidate( SID_TABLE_CELL ); // StatusZeile updaten! |
| } |
| break; |
| |
| case FN_NUM_BULLET_NEXT: |
| rSh.GotoNextNum(); |
| rReq.Done(); |
| break; |
| |
| case FN_NUM_BULLET_NONUM: |
| rSh.NoNum(); |
| rReq.Done(); |
| break; |
| |
| case FN_NUM_BULLET_OFF: |
| { |
| rReq.Ignore(); |
| SfxRequest aReq( GetView().GetViewFrame(), FN_NUM_BULLET_ON ); |
| aReq.AppendItem( SfxBoolItem( FN_PARAM_1, sal_False ) ); |
| aReq.Done(); |
| rSh.DelNumRules(); |
| break; |
| } |
| |
| case FN_NUM_BULLET_OUTLINE_DOWN: |
| if ( bOutline ) |
| lcl_OutlineUpDownWithSubPoints( rSh, false, false ); |
| else |
| rSh.MoveNumParas(sal_False, sal_False); |
| rReq.Done(); |
| break; |
| |
| case FN_NUM_BULLET_OUTLINE_MOVEDOWN: |
| if ( bOutline ) |
| lcl_OutlineUpDownWithSubPoints( rSh, true, false ); |
| else |
| rSh.MoveNumParas(sal_True, sal_False); |
| rReq.Done(); |
| break; |
| |
| case FN_NUM_BULLET_OUTLINE_MOVEUP: |
| if ( bOutline ) |
| lcl_OutlineUpDownWithSubPoints( rSh, true, true ); |
| else |
| rSh.MoveNumParas(sal_True, sal_True); |
| rReq.Done(); |
| break; |
| |
| case FN_NUM_BULLET_OUTLINE_UP: |
| if ( bOutline ) |
| lcl_OutlineUpDownWithSubPoints( rSh, false, true ); |
| else |
| rSh.MoveNumParas(sal_False, sal_True); |
| rReq.Done(); |
| break; |
| |
| case FN_NUM_BULLET_PREV: |
| rSh.GotoPrevNum(); |
| rReq.Done(); |
| break; |
| |
| case FN_NUM_OR_NONUM: |
| { |
| sal_Bool bApi = rReq.IsAPI(); |
| sal_Bool bDelete = !rSh.IsNoNum(!bApi); |
| if(pArgs ) |
| bDelete = ((SfxBoolItem &)pArgs->Get(rReq.GetSlot())).GetValue(); |
| rSh.NumOrNoNum( bDelete, !bApi ); |
| rReq.AppendItem( SfxBoolItem( nSlot, bDelete ) ); |
| rReq.Done(); |
| } |
| break; |
| default: |
| ASSERT(!this, falscher Dispatcher); |
| return; |
| } |
| } |
| |
| |
| void SwListShell::GetState(SfxItemSet &rSet) |
| { |
| SfxWhichIter aIter( rSet ); |
| sal_uInt16 nWhich = aIter.FirstWhich(); |
| SwWrtShell& rSh = GetShell(); |
| sal_uInt8 nCurrentNumLevel = rSh.GetNumLevel(); |
| while ( nWhich ) |
| { |
| switch( nWhich ) |
| { |
| case FN_NUM_OR_NONUM: |
| rSet.Put(SfxBoolItem(nWhich, GetShell().IsNoNum(sal_False))); |
| break; |
| case FN_NUM_BULLET_OUTLINE_UP: |
| case FN_NUM_BULLET_UP: |
| if(!nCurrentNumLevel) |
| rSet.DisableItem(nWhich); |
| break; |
| case FN_NUM_BULLET_OUTLINE_DOWN : |
| { |
| sal_uInt8 nUpper = 0; |
| sal_uInt8 nLower = 0; |
| rSh.GetCurrentOutlineLevels( nUpper, nLower ); |
| if(nLower == (MAXLEVEL - 1)) |
| rSet.DisableItem(nWhich); |
| } |
| break; |
| case FN_NUM_BULLET_DOWN: |
| if(nCurrentNumLevel == (MAXLEVEL - 1)) |
| rSet.DisableItem(nWhich); |
| break; |
| |
| case FN_NUM_BULLET_NONUM: |
| if ( rSh.CrsrInsideInputFld() ) |
| { |
| rSet.DisableItem(nWhich); |
| } |
| break; |
| } |
| nWhich = aIter.NextWhich(); |
| } |
| } |
| |
| |
| SwListShell::SwListShell(SwView &_rView) : |
| SwBaseShell(_rView) |
| { |
| SetName(String::CreateFromAscii("List")); |
| SetHelpId(SW_LISTSHELL); |
| } |
| |
| |
