AOO410/main/sw/source/ui/shells/drawsh.cxx - openoffice - Git at Google

 /**************************************************************
  *
  * Licensed to the Apache Software Foundation (ASF) under one
  * or more contributor license agreements.  See the NOTICE file
  * distributed with this work for additional information
  * regarding copyright ownership.  The ASF licenses this file
  * to you under the Apache License, Version 2.0 (the
  * "License"); you may not use this file except in compliance
  * with the License.  You may obtain a copy of the License at
  *
  *   http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing,
  * software distributed under the License is distributed on an
  * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
  * KIND, either express or implied.  See the License for the
  * specific language governing permissions and limitations
  * under the License.
  *
  *************************************************************/


 // MARKER(update_precomp.py): autogen include statement, do not remove
 #include "precompiled_sw.hxx"


 #include <tools/shl.hxx>
 #include <svx/svdview.hxx>
 #include <svx/svdotext.hxx>
 #include <svl/whiter.hxx>
 #include <svx/fontwork.hxx>
 #include <sfx2/request.hxx>
 #include <sfx2/bindings.hxx>
 #include <sfx2/objface.hxx>
 #include <svl/itemiter.hxx>
 #include <svl/srchitem.hxx>
 #include <svx/extrusionbar.hxx>
 #include <svx/fontworkbar.hxx>
 #include <svx/tbxcustomshapes.hxx>
 #include <uitool.hxx>
 #include <wview.hxx>
 #include <swmodule.hxx>
 #include <swwait.hxx>
 #include <docstat.hxx>
 #include <IDocumentStatistics.hxx>

 #include <comphelper/processfactory.hxx>
 #include <com/sun/star/ui/dialogs/XExecutableDialog.hpp>

 #include <svx/xtable.hxx>
 #include <sfx2/sidebar/EnumContext.hxx>
 #include <svx/svdoashp.hxx>
 #include <svx/svdoole2.hxx>
 #include <sfx2/opengrf.hxx>
 #include <svx/svdograf.hxx>
 #include <svx/svdundo.hxx>
 #include <svx/xbtmpit.hxx>

 #include "swundo.hxx"
 #include "wrtsh.hxx"
 #include "cmdid.h"
 #include "globals.hrc"
 #include "helpid.h"
 #include "popup.hrc"
 #include "shells.hrc"
 #include "drwbassh.hxx"
 #include "drawsh.hxx"

 #define SwDrawShell
 #include <sfx2/msg.hxx>
 #include "swslots.hxx"
 #include "swabstdlg.hxx" //CHINA001
 #include "misc.hrc"

 using namespace ::com::sun::star;
 using namespace ::com::sun::star::uno;

 SFX_IMPL_INTERFACE(SwDrawShell, SwDrawBaseShell, SW_RES(STR_SHELLNAME_DRAW))
 {
 	SFX_POPUPMENU_REGISTRATION(SW_RES(MN_DRAW_POPUPMENU));
 	SFX_OBJECTBAR_REGISTRATION(SFX_OBJECTBAR_OBJECT, SW_RES(RID_DRAW_TOOLBOX));
 	SFX_CHILDWINDOW_REGISTRATION(SvxFontWorkChildWindow::GetChildWindowId());
 }

 TYPEINIT1(SwDrawShell,SwDrawBaseShell)

 /*--------------------------------------------------------------------
 	Beschreibung:
  --------------------------------------------------------------------*/


 // #123922# check as the name implies
 SdrObject* SwDrawShell::IsSingleFillableNonOLESelected()
 {
     SwWrtShell &rSh = GetShell();
     SdrView* pSdrView = rSh.GetDrawView();

     if(!pSdrView)
     {
         return 0;
     }

     if(1 != pSdrView->GetMarkedObjectCount())
     {
         return 0;
     }

     SdrObject* pPickObj = pSdrView->GetMarkedObjectByIndex(0);

     if(!pPickObj)
     {
         return 0;
     }

     if(!pPickObj->IsClosedObj())
     {
         return 0;
     }

     if(dynamic_cast< SdrOle2Obj* >(pPickObj))
     {
         return 0;
     }

     return pPickObj;
 }

 // #123922# insert given graphic data dependent of the object type in focus
 void SwDrawShell::InsertPictureFromFile(SdrObject& rObject)
 {
     SwWrtShell &rSh = GetShell();
     SdrView* pSdrView = rSh.GetDrawView();

     if(pSdrView)
     {
         SvxOpenGraphicDialog aDlg(SW_RESSTR(STR_INSERT_GRAPHIC));

         if(GRFILTER_OK == aDlg.Execute())
         {
             Graphic aGraphic;
             int nError(aDlg.GetGraphic(aGraphic));

             if(GRFILTER_OK == nError)
             {
                 const bool bAsLink(aDlg.IsAsLink());
                 SdrObject* pResult = &rObject;

                 rSh.StartUndo(UNDO_PASTE_CLIPBOARD);

                 if(dynamic_cast< SdrGrafObj* >(&rObject))
                 {
                     SdrGrafObj* pNewGrafObj = (SdrGrafObj*)rObject.Clone();

                     pNewGrafObj->SetGraphic(aGraphic);

                     // #123922#  for handling MasterObject and virtual ones correctly, SW
                     // wants us to call ReplaceObject at the page, but that also
                     // triggers the same assertion (I tried it), so stay at the view method
                     pSdrView->ReplaceObjectAtView(&rObject, *pSdrView->GetSdrPageView(), pNewGrafObj);

                     // set in all cases - the Clone() will have copied an existing link (!)
                     pNewGrafObj->SetGraphicLink(
                         bAsLink ? aDlg.GetPath() : String(),
                         bAsLink ? aDlg.GetCurrentFilter() : String());

                     pResult = pNewGrafObj;
                 }
                 else // if(rObject.IsClosedObj() && !dynamic_cast< SdrOle2Obj* >(&rObject))
                 {
                     pSdrView->AddUndo(new SdrUndoAttrObj(rObject));

                     SfxItemSet aSet(pSdrView->GetModel()->GetItemPool(), XATTR_FILLSTYLE, XATTR_FILLBITMAP);

                     aSet.Put(XFillStyleItem(XFILL_BITMAP));
                     aSet.Put(XFillBitmapItem(String(), aGraphic));
                     rObject.SetMergedItemSetAndBroadcast(aSet);
                 }

                 rSh.EndUndo( UNDO_END );

                 if(pResult)
                 {
                     // we are done; mark the modified/new object
                     pSdrView->MarkObj(pResult, pSdrView->GetSdrPageView());
                 }
             }
         }
     }
 }

 void SwDrawShell::Execute(SfxRequest &rReq)
 {
 	SwWrtShell			&rSh = GetShell();
 	SdrView				*pSdrView = rSh.GetDrawView();
 	const SfxItemSet	*pArgs = rReq.GetArgs();
 	SfxBindings			&rBnd  = GetView().GetViewFrame()->GetBindings();
 	sal_uInt16				 nSlotId = rReq.GetSlot();
 	sal_Bool				 bChanged = pSdrView->GetModel()->IsChanged();

 	pSdrView->GetModel()->SetChanged(sal_False);

 	const SfxPoolItem* pItem;
 	if(pArgs)
 		pArgs->GetItemState(nSlotId, sal_False, &pItem);

     sal_Bool bMirror = sal_True;

 	switch (nSlotId)
 	{
 		case SID_OBJECT_ROTATE:
 			if (rSh.IsObjSelected() && pSdrView->IsRotateAllowed())
 			{
 				if (GetView().IsDrawRotate())
 					rSh.SetDragMode(SDRDRAG_MOVE);
 				else
 					rSh.SetDragMode(SDRDRAG_ROTATE);

 				GetView().FlipDrawRotate();
 			}
 			break;

 		case SID_BEZIER_EDIT:
 			if (GetView().IsDrawRotate())
 			{
 				rSh.SetDragMode(SDRDRAG_MOVE);
 				GetView().FlipDrawRotate();
 			}
 			GetView().FlipDrawSelMode();
 			pSdrView->SetFrameDragSingles(GetView().IsDrawSelMode());
 			GetView().AttrChangedNotify(&rSh); // Shellwechsel...
 			break;

 		case SID_OBJECT_HELL:
 			if (rSh.IsObjSelected())
 			{
 				rSh.StartUndo( UNDO_START );
 				SetWrapMode(FN_FRAME_WRAPTHRU_TRANSP);
 				rSh.SelectionToHell();
 				rSh.EndUndo( UNDO_END );
 				rBnd.Invalidate(SID_OBJECT_HEAVEN);
 			}
 			break;

 		case SID_OBJECT_HEAVEN:
 			if (rSh.IsObjSelected())
 			{
 				rSh.StartUndo( UNDO_START );
 				SetWrapMode(FN_FRAME_WRAPTHRU);
 				rSh.SelectionToHeaven();
 				rSh.EndUndo( UNDO_END );
 				rBnd.Invalidate(SID_OBJECT_HELL);
 			}
 			break;

 		case FN_TOOL_HIERARCHIE:
 			if (rSh.IsObjSelected())
 			{
 				rSh.StartUndo( UNDO_START );
 				if (rSh.GetLayerId() == 0)
 				{
 					SetWrapMode(FN_FRAME_WRAPTHRU);
 					rSh.SelectionToHeaven();
 				}
 				else
 				{
 					SetWrapMode(FN_FRAME_WRAPTHRU_TRANSP);
 					rSh.SelectionToHell();
 				}
 				rSh.EndUndo( UNDO_END );
                 rBnd.Invalidate( SID_OBJECT_HELL );
                 rBnd.Invalidate( SID_OBJECT_HEAVEN );
 			}
 			break;

         case SID_FLIP_VERTICAL:
             bMirror = sal_False;
             /* no break */
         case SID_FLIP_HORIZONTAL:
             rSh.MirrorSelection( bMirror );
             break;

 		case SID_FONTWORK:
 		{
             FieldUnit eMetric = ::GetDfltMetric(0 != PTR_CAST(SwWebView, &rSh.GetView()));
             SW_MOD()->PutItem(SfxUInt16Item(SID_ATTR_METRIC, static_cast< sal_uInt16 >(eMetric)) );
             SfxViewFrame* pVFrame = GetView().GetViewFrame();
 			if (pArgs)
 			{
 				pVFrame->SetChildWindow(SvxFontWorkChildWindow::GetChildWindowId(),
 					((const SfxBoolItem&)(pArgs->Get(SID_FONTWORK))).GetValue());
 			}
 			else
 				pVFrame->ToggleChildWindow( SvxFontWorkChildWindow::GetChildWindowId() );
 			pVFrame->GetBindings().Invalidate(SID_FONTWORK);
 		}
 		break;
 		case FN_FORMAT_FOOTNOTE_DLG:
 		{
             SwAbstractDialogFactory* pFact = SwAbstractDialogFactory::Create();
             DBG_ASSERT(pFact, "SwAbstractDialogFactory fail!");

             VclAbstractDialog* pDlg = pFact->CreateSwFootNoteOptionDlg( GetView().GetWindow(), GetView().GetWrtShell(), DLG_DOC_FOOTNOTE );
             DBG_ASSERT(pDlg, "Dialogdiet fail!");
 			pDlg->Execute();
 			delete pDlg;
 			break;
 		}
 		case FN_NUMBERING_OUTLINE_DLG:
 		{
 			SfxItemSet aTmp(GetPool(), FN_PARAM_1, FN_PARAM_1);
 			SwAbstractDialogFactory* pFact = SwAbstractDialogFactory::Create();
             DBG_ASSERT(pFact, "Dialogdiet fail!");
             SfxAbstractTabDialog* pDlg = pFact->CreateSwTabDialog( DLG_TAB_OUTLINE,
 														GetView().GetWindow(), &aTmp, GetView().GetWrtShell());
             DBG_ASSERT(pDlg, "Dialogdiet fail!");
 			pDlg->Execute();
 			delete pDlg;
 			rReq.Done();
 		}
 		break;
 		case SID_OPEN_XML_FILTERSETTINGS:
 		{
 			try
 			{
 				uno::Reference < ui::dialogs::XExecutableDialog > xDialog(::comphelper::getProcessServiceFactory()->createInstance(rtl::OUString::createFromAscii("com.sun.star.comp.ui.XSLTFilterDialog")), uno::UNO_QUERY);
 				if( xDialog.is() )
 				{
 					xDialog->execute();
 				}
 			}
 			catch( uno::Exception& )
 			{
 			}
 			rReq.Ignore ();
 		}
 		break;
 		case FN_WORDCOUNT_DIALOG:
 		{
 			SwDocStat aCurr;
 			SwDocStat aDocStat( rSh.getIDocumentStatistics()->GetDocStat() );
 			{
 				SwWait aWait( *GetView().GetDocShell(), true );
 				rSh.StartAction();
 				rSh.CountWords( aCurr );
 				rSh.UpdateDocStat( aDocStat );
 				rSh.EndAction();
 			}

 			SwAbstractDialogFactory* pFact = SwAbstractDialogFactory::Create();
 			DBG_ASSERT(pFact, "Dialogdiet fail!");
 			AbstractSwWordCountDialog* pDialog = pFact->CreateSwWordCountDialog( GetView().GetWindow() );
 			pDialog->SetValues(aCurr, aDocStat );
 			pDialog->Execute();
 			delete pDialog;
 		}
 		break;
 		case SID_EXTRUSION_TOOGLE:
 		case SID_EXTRUSION_TILT_DOWN:
 		case SID_EXTRUSION_TILT_UP:
 		case SID_EXTRUSION_TILT_LEFT:
 		case SID_EXTRUSION_TILT_RIGHT:
 		case SID_EXTRUSION_3D_COLOR:
 		case SID_EXTRUSION_DEPTH:
 		case SID_EXTRUSION_DIRECTION:
 		case SID_EXTRUSION_PROJECTION:
 		case SID_EXTRUSION_LIGHTING_DIRECTION:
 		case SID_EXTRUSION_LIGHTING_INTENSITY:
 		case SID_EXTRUSION_SURFACE:
 		case SID_EXTRUSION_DEPTH_FLOATER:
 		case SID_EXTRUSION_DIRECTION_FLOATER:
 		case SID_EXTRUSION_LIGHTING_FLOATER:
 		case SID_EXTRUSION_SURFACE_FLOATER:
 		case SID_EXTRUSION_DEPTH_DIALOG:
 			svx::ExtrusionBar::execute( pSdrView, rReq, rBnd );
 			rReq.Ignore ();
 			break;

 		case SID_FONTWORK_SHAPE:
 		case SID_FONTWORK_SHAPE_TYPE:
 		case SID_FONTWORK_ALIGNMENT:
 		case SID_FONTWORK_SAME_LETTER_HEIGHTS:
 		case SID_FONTWORK_CHARACTER_SPACING:
 		case SID_FONTWORK_KERN_CHARACTER_PAIRS:
 		case SID_FONTWORK_CHARACTER_SPACING_FLOATER:
 		case SID_FONTWORK_ALIGNMENT_FLOATER:
 		case SID_FONTWORK_CHARACTER_SPACING_DIALOG:
 			svx::FontworkBar::execute( pSdrView, rReq, rBnd );
 			rReq.Ignore ();
 			break;

         case SID_INSERT_GRAPHIC:
         {
             // #123922# check if we can do something
             SdrObject* pObj = IsSingleFillableNonOLESelected();

             if(pObj)
             {
                 // ...and if yes, do something
                 InsertPictureFromFile(*pObj);
                 bool bBla = true;
             }

             break;
         }

 		default:
 			DBG_ASSERT(!this, "falscher Dispatcher");
 			return;
 	}
 	if (pSdrView->GetModel()->IsChanged())
 		rSh.SetModified();
 	else if (bChanged)
 		pSdrView->GetModel()->SetChanged(sal_True);
 }

 /*--------------------------------------------------------------------
 	Beschreibung:
  --------------------------------------------------------------------*/

 void SwDrawShell::GetState(SfxItemSet& rSet)
 {
 	SwWrtShell &rSh = GetShell();
 	SdrView* pSdrView = rSh.GetDrawViewWithValidMarkList();
 	SfxWhichIter aIter( rSet );
 	sal_uInt16 nWhich = aIter.FirstWhich();
 	sal_Bool bProtected = rSh.IsSelObjProtected(FLYPROTECT_CONTENT);

 	if (!bProtected)	// Im Parent nachsehen
 		bProtected |= rSh.IsSelObjProtected( FLYPROTECT_CONTENT|FLYPROTECT_PARENT ) != 0;

 	while( nWhich )
 	{
 		switch( nWhich )
 		{
 			case SID_OBJECT_HELL:
 				if ( !rSh.IsObjSelected() || rSh.GetLayerId() == 0 || bProtected )
 					rSet.DisableItem( nWhich );
 				break;

 			case SID_OBJECT_HEAVEN:
 				if ( !rSh.IsObjSelected() || rSh.GetLayerId() == 1 || bProtected )
 					rSet.DisableItem( nWhich );
 				break;

 			case FN_TOOL_HIERARCHIE:
 				if ( !rSh.IsObjSelected() || bProtected )
 					rSet.DisableItem( nWhich );
 				break;

 			case SID_OBJECT_ROTATE:
 			{
 				const sal_Bool bIsRotate = GetView().IsDrawRotate();
 				if ( (!bIsRotate && !pSdrView->IsRotateAllowed()) || bProtected )
 					rSet.DisableItem( nWhich );
 				else
 					rSet.Put( SfxBoolItem( nWhich, bIsRotate ) );
 			}
 			break;

 			case SID_BEZIER_EDIT:
 				if (!Disable(rSet, nWhich))
 					rSet.Put( SfxBoolItem( nWhich, !GetView().IsDrawSelMode()));
 			break;

             case SID_FLIP_VERTICAL:
                 if ( !pSdrView->IsMirrorAllowed() || bProtected )
                 {
                     rSet.DisableItem( nWhich );
                 }
                 else
                 {
                     // TTTT - needs to be adapted in aw080:
                     // state is not kept for drawing objects --> provide not flipped state
                     rSet.Put( SfxBoolItem( nWhich, sal_False ) );
                 }
                 break;

             case SID_FLIP_HORIZONTAL:
                 if ( !pSdrView->IsMirrorAllowed() || bProtected )
                 {
                     rSet.DisableItem( nWhich );
                 }
                 else
                 {
                     // TTTT - needs to be adapted in aw080:
                     // state is not kept for drawing objects --> provide not flipped state
                     rSet.Put( SfxBoolItem( nWhich, sal_False ) );
                 }
                 break;

 			case SID_FONTWORK:
 			{
 				if (bProtected)
 					rSet.DisableItem( nWhich );
 				else
 				{
 					const sal_uInt16 nId = SvxFontWorkChildWindow::GetChildWindowId();
 					rSet.Put(SfxBoolItem( nWhich , GetView().GetViewFrame()->HasChildWindow(nId)));
 				}
 			}
 			break;

             case SID_INSERT_GRAPHIC:
             {
                 // #123922# check if we can do something
                 SdrObject* pObj = IsSingleFillableNonOLESelected();

                 if(!pObj)
                 {
                     rSet.DisableItem(nWhich);
                 }

                 break;
             }
 		}
 		nWhich = aIter.NextWhich();
 	}
 	svx::ExtrusionBar::getState( pSdrView, rSet );
 	svx::FontworkBar::getState( pSdrView, rSet );
 }

 /*--------------------------------------------------------------------
 	Beschreibung:
  --------------------------------------------------------------------*/


 SwDrawShell::SwDrawShell(SwView &_rView) :
     SwDrawBaseShell(_rView)
 {
 	SetHelpId(SW_DRAWSHELL);
 	SetName(String::CreateFromAscii("Draw"));

     SfxShell::SetContextName(sfx2::sidebar::EnumContext::GetContextName(sfx2::sidebar::EnumContext::Context_Draw));
 }

 /*************************************************************************
 |*
 |* SfxRequests fuer FontWork bearbeiten
 |*
 \************************************************************************/


 void SwDrawShell::ExecFormText(SfxRequest& rReq)
 {
 	SwWrtShell &rSh = GetShell();
 	SdrView*	pDrView = rSh.GetDrawView();
 	sal_Bool		bChanged = pDrView->GetModel()->IsChanged();
 	pDrView->GetModel()->SetChanged(sal_False);

 	const SdrMarkList& rMarkList = pDrView->GetMarkedObjectList();

 	if ( rMarkList.GetMarkCount() == 1 && rReq.GetArgs() )
 	{
 		const SfxItemSet& rSet = *rReq.GetArgs();

 		if ( pDrView->IsTextEdit() )
 		{
 			pDrView->SdrEndTextEdit( sal_True );
 			GetView().AttrChangedNotify(&rSh);
 		}

 		pDrView->SetAttributes(rSet);
 	}
 	if (pDrView->GetModel()->IsChanged())
 		rSh.SetModified();
 	else
 		if (bChanged)
 			pDrView->GetModel()->SetChanged(sal_True);
 }

 /*************************************************************************
 |*
 |* Statuswerte fuer FontWork zurueckgeben
 |*
 \************************************************************************/


 void SwDrawShell::GetFormTextState(SfxItemSet& rSet)
 {
 	SwWrtShell &rSh = GetShell();
 	SdrView* pDrView = rSh.GetDrawView();
 	const SdrMarkList& rMarkList = pDrView->GetMarkedObjectList();
 	const SdrObject* pObj = NULL;
 	SvxFontWorkDialog* pDlg = NULL;

 	const sal_uInt16 nId = SvxFontWorkChildWindow::GetChildWindowId();

 	SfxViewFrame* pVFrame = GetView().GetViewFrame();
 	if ( pVFrame->HasChildWindow(nId) )
 		pDlg = (SvxFontWorkDialog*)(pVFrame->GetChildWindow(nId)->GetWindow());

 	if ( rMarkList.GetMarkCount() == 1 )
 		pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();

     const SdrTextObj* pTextObj = dynamic_cast< const SdrTextObj* >(pObj);
     const bool bDeactivate(
         !pObj ||
         !pTextObj ||
         !pTextObj->HasText() ||
         dynamic_cast< const SdrObjCustomShape* >(pObj)); // #121538# no FontWork for CustomShapes

     if(bDeactivate)
 	{
         rSet.DisableItem(XATTR_FORMTXTSTYLE);
         rSet.DisableItem(XATTR_FORMTXTADJUST);
         rSet.DisableItem(XATTR_FORMTXTDISTANCE);
         rSet.DisableItem(XATTR_FORMTXTSTART);
         rSet.DisableItem(XATTR_FORMTXTMIRROR);
         rSet.DisableItem(XATTR_FORMTXTHIDEFORM);
         rSet.DisableItem(XATTR_FORMTXTOUTLINE);
         rSet.DisableItem(XATTR_FORMTXTSHADOW);
         rSet.DisableItem(XATTR_FORMTXTSHDWCOLOR);
         rSet.DisableItem(XATTR_FORMTXTSHDWXVAL);
         rSet.DisableItem(XATTR_FORMTXTSHDWYVAL);
 	}
 	else
 	{
 		if ( pDlg )
 			pDlg->SetColorTable(XColorList::GetStdColorList());

 		pDrView->GetAttributes( rSet );
 	}
 }
	/**************************************************************
	*
	* Licensed to the Apache Software Foundation (ASF) under one
	* or more contributor license agreements. See the NOTICE file
	* distributed with this work for additional information
	* regarding copyright ownership. The ASF licenses this file
	* to you under the Apache License, Version 2.0 (the
	* "License"); you may not use this file except in compliance
	* with the License. You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing,
	* software distributed under the License is distributed on an
	* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
	* KIND, either express or implied. See the License for the
	* specific language governing permissions and limitations
	* under the License.
	*
	*************************************************************/



	// MARKER(update_precomp.py): autogen include statement, do not remove
	#include "precompiled_sw.hxx"


	#include <tools/shl.hxx>
	#include <svx/svdview.hxx>
	#include <svx/svdotext.hxx>
	#include <svl/whiter.hxx>
	#include <svx/fontwork.hxx>
	#include <sfx2/request.hxx>
	#include <sfx2/bindings.hxx>
	#include <sfx2/objface.hxx>
	#include <svl/itemiter.hxx>
	#include <svl/srchitem.hxx>
	#include <svx/extrusionbar.hxx>
	#include <svx/fontworkbar.hxx>
	#include <svx/tbxcustomshapes.hxx>
	#include <uitool.hxx>
	#include <wview.hxx>
	#include <swmodule.hxx>
	#include <swwait.hxx>
	#include <docstat.hxx>
	#include <IDocumentStatistics.hxx>

	#include <comphelper/processfactory.hxx>
	#include <com/sun/star/ui/dialogs/XExecutableDialog.hpp>

	#include <svx/xtable.hxx>
	#include <sfx2/sidebar/EnumContext.hxx>
	#include <svx/svdoashp.hxx>
	#include <svx/svdoole2.hxx>
	#include <sfx2/opengrf.hxx>
	#include <svx/svdograf.hxx>
	#include <svx/svdundo.hxx>
	#include <svx/xbtmpit.hxx>

	#include "swundo.hxx"
	#include "wrtsh.hxx"
	#include "cmdid.h"
	#include "globals.hrc"
	#include "helpid.h"
	#include "popup.hrc"
	#include "shells.hrc"
	#include "drwbassh.hxx"
	#include "drawsh.hxx"

	#define SwDrawShell
	#include <sfx2/msg.hxx>
	#include "swslots.hxx"
	#include "swabstdlg.hxx" //CHINA001
	#include "misc.hrc"

	using namespace ::com::sun::star;
	using namespace ::com::sun::star::uno;

	SFX_IMPL_INTERFACE(SwDrawShell, SwDrawBaseShell, SW_RES(STR_SHELLNAME_DRAW))
	{
	SFX_POPUPMENU_REGISTRATION(SW_RES(MN_DRAW_POPUPMENU));
	SFX_OBJECTBAR_REGISTRATION(SFX_OBJECTBAR_OBJECT, SW_RES(RID_DRAW_TOOLBOX));
	SFX_CHILDWINDOW_REGISTRATION(SvxFontWorkChildWindow::GetChildWindowId());
	}

	TYPEINIT1(SwDrawShell,SwDrawBaseShell)

	/*--------------------------------------------------------------------
	Beschreibung:
	--------------------------------------------------------------------*/


	// #123922# check as the name implies
	SdrObject* SwDrawShell::IsSingleFillableNonOLESelected()
	{
	SwWrtShell &rSh = GetShell();
	SdrView* pSdrView = rSh.GetDrawView();

	if(!pSdrView)
	{
	return 0;
	}

	if(1 != pSdrView->GetMarkedObjectCount())
	{
	return 0;
	}

	SdrObject* pPickObj = pSdrView->GetMarkedObjectByIndex(0);

	if(!pPickObj)
	{
	return 0;
	}

	if(!pPickObj->IsClosedObj())
	{
	return 0;
	}

	if(dynamic_cast< SdrOle2Obj* >(pPickObj))
	{
	return 0;
	}

	return pPickObj;
	}

	// #123922# insert given graphic data dependent of the object type in focus
	void SwDrawShell::InsertPictureFromFile(SdrObject& rObject)
	{
	SwWrtShell &rSh = GetShell();
	SdrView* pSdrView = rSh.GetDrawView();

	if(pSdrView)
	{
	SvxOpenGraphicDialog aDlg(SW_RESSTR(STR_INSERT_GRAPHIC));

	if(GRFILTER_OK == aDlg.Execute())
	{
	Graphic aGraphic;
	int nError(aDlg.GetGraphic(aGraphic));

	if(GRFILTER_OK == nError)
	{
	const bool bAsLink(aDlg.IsAsLink());
	SdrObject* pResult = &rObject;

	rSh.StartUndo(UNDO_PASTE_CLIPBOARD);

	if(dynamic_cast< SdrGrafObj* >(&rObject))
	{
	SdrGrafObj* pNewGrafObj = (SdrGrafObj*)rObject.Clone();

	pNewGrafObj->SetGraphic(aGraphic);

	// #123922# for handling MasterObject and virtual ones correctly, SW
	// wants us to call ReplaceObject at the page, but that also
	// triggers the same assertion (I tried it), so stay at the view method
	pSdrView->ReplaceObjectAtView(&rObject, *pSdrView->GetSdrPageView(), pNewGrafObj);

	// set in all cases - the Clone() will have copied an existing link (!)
	pNewGrafObj->SetGraphicLink(
	bAsLink ? aDlg.GetPath() : String(),
	bAsLink ? aDlg.GetCurrentFilter() : String());

	pResult = pNewGrafObj;
	}
	else // if(rObject.IsClosedObj() && !dynamic_cast< SdrOle2Obj* >(&rObject))
	{
	pSdrView->AddUndo(new SdrUndoAttrObj(rObject));

	SfxItemSet aSet(pSdrView->GetModel()->GetItemPool(), XATTR_FILLSTYLE, XATTR_FILLBITMAP);

	aSet.Put(XFillStyleItem(XFILL_BITMAP));
	aSet.Put(XFillBitmapItem(String(), aGraphic));
	rObject.SetMergedItemSetAndBroadcast(aSet);
	}

	rSh.EndUndo( UNDO_END );

	if(pResult)
	{
	// we are done; mark the modified/new object
	pSdrView->MarkObj(pResult, pSdrView->GetSdrPageView());
	}
	}
	}
	}
	}

	void SwDrawShell::Execute(SfxRequest &rReq)
	{
	SwWrtShell &rSh = GetShell();
	SdrView *pSdrView = rSh.GetDrawView();
	const SfxItemSet *pArgs = rReq.GetArgs();
	SfxBindings &rBnd = GetView().GetViewFrame()->GetBindings();
	sal_uInt16 nSlotId = rReq.GetSlot();
	sal_Bool bChanged = pSdrView->GetModel()->IsChanged();

	pSdrView->GetModel()->SetChanged(sal_False);

	const SfxPoolItem* pItem;
	if(pArgs)
	pArgs->GetItemState(nSlotId, sal_False, &pItem);

	sal_Bool bMirror = sal_True;

	switch (nSlotId)
	{
	case SID_OBJECT_ROTATE:
	if (rSh.IsObjSelected() && pSdrView->IsRotateAllowed())
	{
	if (GetView().IsDrawRotate())
	rSh.SetDragMode(SDRDRAG_MOVE);
	else
	rSh.SetDragMode(SDRDRAG_ROTATE);

	GetView().FlipDrawRotate();
	}
	break;

	case SID_BEZIER_EDIT:
	if (GetView().IsDrawRotate())
	{
	rSh.SetDragMode(SDRDRAG_MOVE);
	GetView().FlipDrawRotate();
	}
	GetView().FlipDrawSelMode();
	pSdrView->SetFrameDragSingles(GetView().IsDrawSelMode());
	GetView().AttrChangedNotify(&rSh); // Shellwechsel...
	break;

	case SID_OBJECT_HELL:
	if (rSh.IsObjSelected())
	{
	rSh.StartUndo( UNDO_START );
	SetWrapMode(FN_FRAME_WRAPTHRU_TRANSP);
	rSh.SelectionToHell();
	rSh.EndUndo( UNDO_END );
	rBnd.Invalidate(SID_OBJECT_HEAVEN);
	}
	break;

	case SID_OBJECT_HEAVEN:
	if (rSh.IsObjSelected())
	{
	rSh.StartUndo( UNDO_START );
	SetWrapMode(FN_FRAME_WRAPTHRU);
	rSh.SelectionToHeaven();
	rSh.EndUndo( UNDO_END );
	rBnd.Invalidate(SID_OBJECT_HELL);
	}
	break;

	case FN_TOOL_HIERARCHIE:
	if (rSh.IsObjSelected())
	{
	rSh.StartUndo( UNDO_START );
	if (rSh.GetLayerId() == 0)
	{
	SetWrapMode(FN_FRAME_WRAPTHRU);
	rSh.SelectionToHeaven();
	}
	else
	{
	SetWrapMode(FN_FRAME_WRAPTHRU_TRANSP);
	rSh.SelectionToHell();
	}
	rSh.EndUndo( UNDO_END );
	rBnd.Invalidate( SID_OBJECT_HELL );
	rBnd.Invalidate( SID_OBJECT_HEAVEN );
	}
	break;

	case SID_FLIP_VERTICAL:
	bMirror = sal_False;
	/* no break */
	case SID_FLIP_HORIZONTAL:
	rSh.MirrorSelection( bMirror );
	break;

	case SID_FONTWORK:
	{
	FieldUnit eMetric = ::GetDfltMetric(0 != PTR_CAST(SwWebView, &rSh.GetView()));
	SW_MOD()->PutItem(SfxUInt16Item(SID_ATTR_METRIC, static_cast< sal_uInt16 >(eMetric)) );
	SfxViewFrame* pVFrame = GetView().GetViewFrame();
	if (pArgs)
	{
	pVFrame->SetChildWindow(SvxFontWorkChildWindow::GetChildWindowId(),
	((const SfxBoolItem&)(pArgs->Get(SID_FONTWORK))).GetValue());
	}
	else
	pVFrame->ToggleChildWindow( SvxFontWorkChildWindow::GetChildWindowId() );
	pVFrame->GetBindings().Invalidate(SID_FONTWORK);
	}
	break;
	case FN_FORMAT_FOOTNOTE_DLG:
	{
	SwAbstractDialogFactory* pFact = SwAbstractDialogFactory::Create();
	DBG_ASSERT(pFact, "SwAbstractDialogFactory fail!");

	VclAbstractDialog* pDlg = pFact->CreateSwFootNoteOptionDlg( GetView().GetWindow(), GetView().GetWrtShell(), DLG_DOC_FOOTNOTE );
	DBG_ASSERT(pDlg, "Dialogdiet fail!");
	pDlg->Execute();
	delete pDlg;
	break;
	}
	case FN_NUMBERING_OUTLINE_DLG:
	{
	SfxItemSet aTmp(GetPool(), FN_PARAM_1, FN_PARAM_1);
	SwAbstractDialogFactory* pFact = SwAbstractDialogFactory::Create();
	DBG_ASSERT(pFact, "Dialogdiet fail!");
	SfxAbstractTabDialog* pDlg = pFact->CreateSwTabDialog( DLG_TAB_OUTLINE,
	GetView().GetWindow(), &aTmp, GetView().GetWrtShell());
	DBG_ASSERT(pDlg, "Dialogdiet fail!");
	pDlg->Execute();
	delete pDlg;
	rReq.Done();
	}
	break;
	case SID_OPEN_XML_FILTERSETTINGS:
	{
	try
	{
	uno::Reference < ui::dialogs::XExecutableDialog > xDialog(::comphelper::getProcessServiceFactory()->createInstance(rtl::OUString::createFromAscii("com.sun.star.comp.ui.XSLTFilterDialog")), uno::UNO_QUERY);
	if( xDialog.is() )
	{
	xDialog->execute();
	}
	}
	catch( uno::Exception& )
	{
	}
	rReq.Ignore ();
	}
	break;
	case FN_WORDCOUNT_DIALOG:
	{
	SwDocStat aCurr;
	SwDocStat aDocStat( rSh.getIDocumentStatistics()->GetDocStat() );
	{
	SwWait aWait( *GetView().GetDocShell(), true );
	rSh.StartAction();
	rSh.CountWords( aCurr );
	rSh.UpdateDocStat( aDocStat );
	rSh.EndAction();
	}

	SwAbstractDialogFactory* pFact = SwAbstractDialogFactory::Create();
	DBG_ASSERT(pFact, "Dialogdiet fail!");
	AbstractSwWordCountDialog* pDialog = pFact->CreateSwWordCountDialog( GetView().GetWindow() );
	pDialog->SetValues(aCurr, aDocStat );
	pDialog->Execute();
	delete pDialog;
	}
	break;
	case SID_EXTRUSION_TOOGLE:
	case SID_EXTRUSION_TILT_DOWN:
	case SID_EXTRUSION_TILT_UP:
	case SID_EXTRUSION_TILT_LEFT:
	case SID_EXTRUSION_TILT_RIGHT:
	case SID_EXTRUSION_3D_COLOR:
	case SID_EXTRUSION_DEPTH:
	case SID_EXTRUSION_DIRECTION:
	case SID_EXTRUSION_PROJECTION:
	case SID_EXTRUSION_LIGHTING_DIRECTION:
	case SID_EXTRUSION_LIGHTING_INTENSITY:
	case SID_EXTRUSION_SURFACE:
	case SID_EXTRUSION_DEPTH_FLOATER:
	case SID_EXTRUSION_DIRECTION_FLOATER:
	case SID_EXTRUSION_LIGHTING_FLOATER:
	case SID_EXTRUSION_SURFACE_FLOATER:
	case SID_EXTRUSION_DEPTH_DIALOG:
	svx::ExtrusionBar::execute( pSdrView, rReq, rBnd );
	rReq.Ignore ();
	break;

	case SID_FONTWORK_SHAPE:
	case SID_FONTWORK_SHAPE_TYPE:
	case SID_FONTWORK_ALIGNMENT:
	case SID_FONTWORK_SAME_LETTER_HEIGHTS:
	case SID_FONTWORK_CHARACTER_SPACING:
	case SID_FONTWORK_KERN_CHARACTER_PAIRS:
	case SID_FONTWORK_CHARACTER_SPACING_FLOATER:
	case SID_FONTWORK_ALIGNMENT_FLOATER:
	case SID_FONTWORK_CHARACTER_SPACING_DIALOG:
	svx::FontworkBar::execute( pSdrView, rReq, rBnd );
	rReq.Ignore ();
	break;

	case SID_INSERT_GRAPHIC:
	{
	// #123922# check if we can do something
	SdrObject* pObj = IsSingleFillableNonOLESelected();

	if(pObj)
	{
	// ...and if yes, do something
	InsertPictureFromFile(*pObj);
	bool bBla = true;
	}

	break;
	}

	default:
	DBG_ASSERT(!this, "falscher Dispatcher");
	return;
	}
	if (pSdrView->GetModel()->IsChanged())
	rSh.SetModified();
	else if (bChanged)
	pSdrView->GetModel()->SetChanged(sal_True);
	}

	/*--------------------------------------------------------------------
	Beschreibung:
	--------------------------------------------------------------------*/

	void SwDrawShell::GetState(SfxItemSet& rSet)
	{
	SwWrtShell &rSh = GetShell();
	SdrView* pSdrView = rSh.GetDrawViewWithValidMarkList();
	SfxWhichIter aIter( rSet );
	sal_uInt16 nWhich = aIter.FirstWhich();
	sal_Bool bProtected = rSh.IsSelObjProtected(FLYPROTECT_CONTENT);

	if (!bProtected) // Im Parent nachsehen
	bProtected \|= rSh.IsSelObjProtected( FLYPROTECT_CONTENT\|FLYPROTECT_PARENT ) != 0;

	while( nWhich )
	{
	switch( nWhich )
	{
	case SID_OBJECT_HELL:
	if ( !rSh.IsObjSelected() \|\| rSh.GetLayerId() == 0 \|\| bProtected )
	rSet.DisableItem( nWhich );
	break;

	case SID_OBJECT_HEAVEN:
	if ( !rSh.IsObjSelected() \|\| rSh.GetLayerId() == 1 \|\| bProtected )
	rSet.DisableItem( nWhich );
	break;

	case FN_TOOL_HIERARCHIE:
	if ( !rSh.IsObjSelected() \|\| bProtected )
	rSet.DisableItem( nWhich );
	break;

	case SID_OBJECT_ROTATE:
	{
	const sal_Bool bIsRotate = GetView().IsDrawRotate();
	if ( (!bIsRotate && !pSdrView->IsRotateAllowed()) \|\| bProtected )
	rSet.DisableItem( nWhich );
	else
	rSet.Put( SfxBoolItem( nWhich, bIsRotate ) );
	}
	break;

	case SID_BEZIER_EDIT:
	if (!Disable(rSet, nWhich))
	rSet.Put( SfxBoolItem( nWhich, !GetView().IsDrawSelMode()));
	break;

	case SID_FLIP_VERTICAL:
	if ( !pSdrView->IsMirrorAllowed() \|\| bProtected )
	{
	rSet.DisableItem( nWhich );
	}
	else
	{
	// TTTT - needs to be adapted in aw080:
	// state is not kept for drawing objects --> provide not flipped state
	rSet.Put( SfxBoolItem( nWhich, sal_False ) );
	}
	break;

	case SID_FLIP_HORIZONTAL:
	if ( !pSdrView->IsMirrorAllowed() \|\| bProtected )
	{
	rSet.DisableItem( nWhich );
	}
	else
	{
	// TTTT - needs to be adapted in aw080:
	// state is not kept for drawing objects --> provide not flipped state
	rSet.Put( SfxBoolItem( nWhich, sal_False ) );
	}
	break;

	case SID_FONTWORK:
	{
	if (bProtected)
	rSet.DisableItem( nWhich );
	else
	{
	const sal_uInt16 nId = SvxFontWorkChildWindow::GetChildWindowId();
	rSet.Put(SfxBoolItem( nWhich , GetView().GetViewFrame()->HasChildWindow(nId)));
	}
	}
	break;

	case SID_INSERT_GRAPHIC:
	{
	// #123922# check if we can do something
	SdrObject* pObj = IsSingleFillableNonOLESelected();

	if(!pObj)
	{
	rSet.DisableItem(nWhich);
	}

	break;
	}
	}
	nWhich = aIter.NextWhich();
	}
	svx::ExtrusionBar::getState( pSdrView, rSet );
	svx::FontworkBar::getState( pSdrView, rSet );
	}

	/*--------------------------------------------------------------------
	Beschreibung:
	--------------------------------------------------------------------*/



	SwDrawShell::SwDrawShell(SwView &_rView) :
	SwDrawBaseShell(_rView)
	{
	SetHelpId(SW_DRAWSHELL);
	SetName(String::CreateFromAscii("Draw"));

	SfxShell::SetContextName(sfx2::sidebar::EnumContext::GetContextName(sfx2::sidebar::EnumContext::Context_Draw));
	}

	/*************************************************************************
	\|*
	\|* SfxRequests fuer FontWork bearbeiten
	\|*
	\************************************************************************/



	void SwDrawShell::ExecFormText(SfxRequest& rReq)
	{
	SwWrtShell &rSh = GetShell();
	SdrView* pDrView = rSh.GetDrawView();
	sal_Bool bChanged = pDrView->GetModel()->IsChanged();
	pDrView->GetModel()->SetChanged(sal_False);

	const SdrMarkList& rMarkList = pDrView->GetMarkedObjectList();

	if ( rMarkList.GetMarkCount() == 1 && rReq.GetArgs() )
	{
	const SfxItemSet& rSet = *rReq.GetArgs();

	if ( pDrView->IsTextEdit() )
	{
	pDrView->SdrEndTextEdit( sal_True );
	GetView().AttrChangedNotify(&rSh);
	}

	pDrView->SetAttributes(rSet);
	}
	if (pDrView->GetModel()->IsChanged())
	rSh.SetModified();
	else
	if (bChanged)
	pDrView->GetModel()->SetChanged(sal_True);
	}

	/*************************************************************************
	\|*
	\|* Statuswerte fuer FontWork zurueckgeben
	\|*
	\************************************************************************/



	void SwDrawShell::GetFormTextState(SfxItemSet& rSet)
	{
	SwWrtShell &rSh = GetShell();
	SdrView* pDrView = rSh.GetDrawView();
	const SdrMarkList& rMarkList = pDrView->GetMarkedObjectList();
	const SdrObject* pObj = NULL;
	SvxFontWorkDialog* pDlg = NULL;

	const sal_uInt16 nId = SvxFontWorkChildWindow::GetChildWindowId();

	SfxViewFrame* pVFrame = GetView().GetViewFrame();
	if ( pVFrame->HasChildWindow(nId) )
	pDlg = (SvxFontWorkDialog*)(pVFrame->GetChildWindow(nId)->GetWindow());

	if ( rMarkList.GetMarkCount() == 1 )
	pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();

	const SdrTextObj* pTextObj = dynamic_cast< const SdrTextObj* >(pObj);
	const bool bDeactivate(
	!pObj \|\|
	!pTextObj \|\|
	!pTextObj->HasText() \|\|
	dynamic_cast< const SdrObjCustomShape* >(pObj)); // #121538# no FontWork for CustomShapes

	if(bDeactivate)
	{
	rSet.DisableItem(XATTR_FORMTXTSTYLE);
	rSet.DisableItem(XATTR_FORMTXTADJUST);
	rSet.DisableItem(XATTR_FORMTXTDISTANCE);
	rSet.DisableItem(XATTR_FORMTXTSTART);
	rSet.DisableItem(XATTR_FORMTXTMIRROR);
	rSet.DisableItem(XATTR_FORMTXTHIDEFORM);
	rSet.DisableItem(XATTR_FORMTXTOUTLINE);
	rSet.DisableItem(XATTR_FORMTXTSHADOW);
	rSet.DisableItem(XATTR_FORMTXTSHDWCOLOR);
	rSet.DisableItem(XATTR_FORMTXTSHDWXVAL);
	rSet.DisableItem(XATTR_FORMTXTSHDWYVAL);
	}
	else
	{
	if ( pDlg )
	pDlg->SetColorTable(XColorList::GetStdColorList());

	pDrView->GetAttributes( rSet );
	}
	}