AOO410/main/sw/source/ui/frmdlg/column.cxx

/**************************************************************
 * 
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 * 
 *   http://www.apache.org/licenses/LICENSE-2.0
 * 
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 * 
 *************************************************************/



// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_sw.hxx"

#ifdef SW_DLLIMPLEMENTATION
#undef SW_DLLIMPLEMENTATION
#endif

#include "column.hxx"

#include "hintids.hxx"
#include <svx/htmlmode.hxx>
#include <editeng/borderline.hxx>
#include <editeng/boxitem.hxx>
#include <editeng/lrspitem.hxx>
#include <editeng/sizeitem.hxx>
#include "editeng/frmdiritem.hxx"
#include <svl/ctloptions.hxx>
#include <sfx2/dispatch.hxx>
#include <vcl/msgbox.hxx>
#include <swmodule.hxx>

#include <helpid.h>
#include "globals.hrc"
#include "swtypes.hxx"
#include "wrtsh.hxx"
#include "view.hxx"
#include "docsh.hxx"
#include "uitool.hxx"
#include "cmdid.h"
#include "viewopt.hxx"
#include "format.hxx"
#include "frmmgr.hxx"
#include "frmdlg.hxx"
#include "colmgr.hxx"
#include "prcntfld.hxx"
#include "paratr.hxx"
#include "frmui.hrc"
#include "poolfmt.hrc"
#include "column.hrc"
#include <section.hxx>
#include <docary.hxx>
#include <pagedesc.hxx>

#include "access.hrc"

#define FRAME_FORMAT_WIDTH 1000

// sw/inc/fmtclds.hxx
SV_IMPL_PTRARR( SwColumns, SwColumnPtr )

/*--------------------------------------------------------------------
	Beschreibung:  Statische Daten
 --------------------------------------------------------------------*/

static const sal_uInt16 __FAR_DATA nLines[] = {
	DEF_LINE_WIDTH_0,
	DEF_LINE_WIDTH_1,
	DEF_LINE_WIDTH_2,
	DEF_LINE_WIDTH_3,
	DEF_LINE_WIDTH_4
};

static const sal_uInt16 nLineCount = sizeof(nLines) / sizeof(nLines[0]);
static const sal_uInt16 nVisCols = 3;

inline sal_Bool IsMarkInSameSection( SwWrtShell& rWrtSh, const SwSection* pSect )
{
	rWrtSh.SwapPam();
	sal_Bool bRet = pSect == rWrtSh.GetCurrSection();
	rWrtSh.SwapPam();
	return bRet;
}

/*--------------------------------------------------------------------
	Beschreibung:
 --------------------------------------------------------------------*/

SwColumnDlg::SwColumnDlg(Window* pParent, SwWrtShell& rSh) :
	SfxModalDialog(pParent, SW_RES(DLG_COLUMN)),
	aOK(this, 		SW_RES(PB_OK)),
	aCancel(this, 	SW_RES(PB_CANCEL)),
	aHelp(this, 	SW_RES(PB_HELP)),
	aApplyToFT(this, SW_RES(FT_APPLY_TO)),
	aApplyToLB(this, SW_RES(LB_APPLY_TO)),
	rWrtShell(rSh),
	pPageSet(0),
	pSectionSet(0),
	pSelectionSet(0),
	pFrameSet(0),
	nOldSelection(0),
    nSelectionWidth(0),
	bPageChanged(sal_False),
	bSectionChanged(sal_False),
	bSelSectionChanged(sal_False),
	bFrameChanged(sal_False)
{
	FreeResource();

	SwRect aRect;
    rWrtShell.CalcBoundRect(aRect, FLY_AS_CHAR);

	nSelectionWidth = aRect.Width();

	SfxItemSet* pColPgSet = 0;
	static sal_uInt16 __READONLY_DATA aSectIds[] = { RES_COL, RES_COL,
												RES_FRM_SIZE, RES_FRM_SIZE,
                                                RES_COLUMNBALANCE, RES_FRAMEDIR,
												0 };

	const SwSection* pCurrSection = rWrtShell.GetCurrSection();
	sal_uInt16 nFullSectCnt = rWrtShell.GetFullSelectedSectionCount();
	if( pCurrSection && ( !rWrtShell.HasSelection() || 0 != nFullSectCnt ))
	{
		nSelectionWidth = rSh.GetSectionWidth(*pCurrSection->GetFmt());
		if ( !nSelectionWidth )
			nSelectionWidth = USHRT_MAX;
		pSectionSet = new SfxItemSet( rWrtShell.GetAttrPool(), aSectIds );
		pSectionSet->Put( pCurrSection->GetFmt()->GetAttrSet() );
		pColPgSet = pSectionSet;
		aApplyToLB.RemoveEntry( aApplyToLB.GetEntryPos(
										(void*)( 1 >= nFullSectCnt
													? LISTBOX_SECTIONS
													: LISTBOX_SECTION )));
	}
	else
	{
		aApplyToLB.RemoveEntry(aApplyToLB.GetEntryPos( (void*) LISTBOX_SECTION ));
		aApplyToLB.RemoveEntry(aApplyToLB.GetEntryPos( (void*) LISTBOX_SECTIONS ));
	}

	if( rWrtShell.HasSelection() && rWrtShell.IsInsRegionAvailable() &&
		( !pCurrSection || ( 1 != nFullSectCnt &&
			IsMarkInSameSection( rWrtShell, pCurrSection ) )))
	{
		pSelectionSet = new SfxItemSet( rWrtShell.GetAttrPool(), aSectIds );
		pColPgSet = pSelectionSet;
	}
	else
		aApplyToLB.RemoveEntry(aApplyToLB.GetEntryPos( (void*) LISTBOX_SELECTION ));

	if( rWrtShell.GetFlyFrmFmt() )
	{
		const SwFrmFmt* pFmt = rSh.GetFlyFrmFmt() ;
		pFrameSet = new SfxItemSet(rWrtShell.GetAttrPool(), aSectIds );
		pFrameSet->Put(pFmt->GetFrmSize());
		pFrameSet->Put(pFmt->GetCol());
		pColPgSet = pFrameSet;
	}
	else
		aApplyToLB.RemoveEntry(aApplyToLB.GetEntryPos( (void*) LISTBOX_FRAME ));


	sal_uInt16 nPagePos = aApplyToLB.GetEntryPos( (void*) LISTBOX_PAGE );
	const SwPageDesc* pPageDesc = rWrtShell.GetSelectedPageDescs();
	if( pPageDesc )
	{
		pPageSet = new SfxItemSet( rWrtShell.GetAttrPool(),
									RES_COL, RES_COL,
									RES_FRM_SIZE, RES_FRM_SIZE,
									RES_LR_SPACE, RES_LR_SPACE,
									0 );

		String sPageStr = aApplyToLB.GetEntry(nPagePos);
		aApplyToLB.RemoveEntry( nPagePos );
		sPageStr += pPageDesc->GetName();
		aApplyToLB.InsertEntry( sPageStr, nPagePos );
		aApplyToLB.SetEntryData( nPagePos, (void*) LISTBOX_PAGE);

		const SwFrmFmt &rFmt = pPageDesc->GetMaster();
		nPageWidth = rFmt.GetFrmSize().GetSize().Width();

		const SvxLRSpaceItem& rLRSpace = (const SvxLRSpaceItem&)rFmt.GetLRSpace();
        const SvxBoxItem& rBox = (const SvxBoxItem&) rFmt.GetBox();
        nPageWidth -= rLRSpace.GetLeft() + rLRSpace.GetRight() + rBox.GetDistance();

		pPageSet->Put(rFmt.GetCol());
		pPageSet->Put(rFmt.GetLRSpace());
		pColPgSet = pPageSet;
	}
	else
		aApplyToLB.RemoveEntry( nPagePos );


	ASSERT( pColPgSet, "" );
	// TabPage erzeugen
	SwColumnPage* pPage = (SwColumnPage*) SwColumnPage::Create( this,
																*pColPgSet );
	pTabPage = pPage;

	//Groesse anpassen
	Size aPageSize(pTabPage->GetSizePixel());
	Size aDlgSize(GetOutputSizePixel());
	aDlgSize.Height() = aPageSize.Height();
	SetOutputSizePixel(aDlgSize);
	pTabPage->Show();

	aApplyToLB.SelectEntryPos(0);
	ObjectHdl(0);

	aApplyToLB.SetSelectHdl(LINK(this, SwColumnDlg, ObjectHdl));
	aOK.SetClickHdl(LINK(this, SwColumnDlg, OkHdl));
    //#i80458# if no columns can be set then disable OK
    if( !aApplyToLB.GetEntryCount() )
        aOK.Enable( sal_False );
    //#i97810# set focus to the TabPage
    pTabPage->ActivateColumnControl();
}

/*--------------------------------------------------------------------
	Beschreibung:
 --------------------------------------------------------------------*/

SwColumnDlg::~SwColumnDlg()
{
	delete pTabPage;
	delete pPageSet;
	delete pSectionSet;
	delete pSelectionSet;
}

/* -----------------26.05.99 11:40-------------------
 *
 * --------------------------------------------------*/
IMPL_LINK(SwColumnDlg, ObjectHdl, ListBox*, pBox)
{
	SfxItemSet* pSet = 0;
	switch(nOldSelection)
	{
		case LISTBOX_SELECTION  :
			pSet = pSelectionSet;
		break;
		case LISTBOX_SECTION	:
			pSet = pSectionSet;
			bSectionChanged = sal_True;
		break;
		case LISTBOX_SECTIONS	:
			pSet = pSectionSet;
			bSelSectionChanged = sal_True;
		break;
		case LISTBOX_PAGE		:
			pSet = pPageSet;
			bPageChanged = sal_True;
		break;
		case LISTBOX_FRAME:
			pSet = pFrameSet;
			bFrameChanged = sal_True;
		break;
	}
	if(pBox)
	{
		pTabPage->FillItemSet(*pSet);
	}
	nOldSelection = (long)aApplyToLB.GetEntryData(aApplyToLB.GetSelectEntryPos());
	long nWidth = nSelectionWidth;
	switch(nOldSelection)
	{
		case LISTBOX_SELECTION  :
			pSet = pSelectionSet;
            if( pSelectionSet )
			    pSet->Put(SwFmtFrmSize(ATT_VAR_SIZE, nWidth, nWidth));
		break;
		case LISTBOX_SECTION	:
		case LISTBOX_SECTIONS	:
			pSet = pSectionSet;
			pSet->Put(SwFmtFrmSize(ATT_VAR_SIZE, nWidth, nWidth));
		break;
		case LISTBOX_PAGE		:
			nWidth = nPageWidth;
			pSet = pPageSet;
			pSet->Put(SwFmtFrmSize(ATT_VAR_SIZE, nWidth, nWidth));
		break;
		case LISTBOX_FRAME:
			pSet = pFrameSet;
		break;
	}

    sal_Bool bIsSection = pSet == pSectionSet || pSet == pSelectionSet;
    pTabPage->ShowBalance(bIsSection);
    pTabPage->SetInSection(bIsSection);
    pTabPage->SetFrmMode(sal_True);
	pTabPage->SetPageWidth(nWidth);
	if( pSet )
        pTabPage->Reset(*pSet);
	return 0;
}
/* -----------------26.05.99 12:32-------------------
 *
 * --------------------------------------------------*/
IMPL_LINK(SwColumnDlg, OkHdl, OKButton*, EMPTYARG)
{
	//aktuelle Selektion auswerten
	SfxItemSet* pSet = 0;
	switch(nOldSelection)
	{
		case LISTBOX_SELECTION  :
			pSet = pSelectionSet;
		break;
		case LISTBOX_SECTION	:
			pSet = pSectionSet;
			bSectionChanged = sal_True;
		break;
		case LISTBOX_SECTIONS	:
			pSet = pSectionSet;
			bSelSectionChanged = sal_True;
		break;
		case LISTBOX_PAGE		:
			pSet = pPageSet;
			bPageChanged = sal_True;
		break;
		case LISTBOX_FRAME:
			pSet = pFrameSet;
			bFrameChanged = sal_True;
		break;
	}
	pTabPage->FillItemSet(*pSet);

	if(pSelectionSet && SFX_ITEM_SET == pSelectionSet->GetItemState(RES_COL))
	{
		//Bereich mit Spalten einfuegen
		const SwFmtCol& rColItem = (const SwFmtCol&)pSelectionSet->Get(RES_COL);
		//nur, wenn es auch Spalten gibt!
		if(rColItem.GetNumCols() > 1)
			rWrtShell.GetView().GetViewFrame()->GetDispatcher()->Execute(
                FN_INSERT_REGION, SFX_CALLMODE_ASYNCHRON, *pSelectionSet );
	}

	if(pSectionSet && pSectionSet->Count() && bSectionChanged )
	{
		const SwSection* pCurrSection = rWrtShell.GetCurrSection();
		const SwSectionFmt* pFmt = pCurrSection->GetFmt();
		sal_uInt16 nNewPos = rWrtShell.GetSectionFmtPos( *pFmt );
        SwSectionData aData(*pCurrSection);
        rWrtShell.UpdateSection( nNewPos, aData, pSectionSet );
	}

	if(pSectionSet && pSectionSet->Count() && bSelSectionChanged )
	{
		rWrtShell.SetSectionAttr( *pSectionSet );
	}

	if(pPageSet && SFX_ITEM_SET == pPageSet->GetItemState(RES_COL) && bPageChanged)
	{
		// aktuellen PageDescriptor ermitteln und damit den Set fuellen
		const sal_uInt16 nCurIdx = rWrtShell.GetCurPageDesc();
		SwPageDesc aPageDesc(rWrtShell.GetPageDesc(nCurIdx));
		SwFrmFmt &rFmt = aPageDesc.GetMaster();
        rFmt.SetFmtAttr(pPageSet->Get(RES_COL));
		rWrtShell.ChgPageDesc(nCurIdx, aPageDesc);
	}
	if(pFrameSet && SFX_ITEM_SET == pFrameSet->GetItemState(RES_COL) && bFrameChanged)
	{
		SfxItemSet aTmp(*pFrameSet->GetPool(), RES_COL, RES_COL);
		aTmp.Put(*pFrameSet);
		rWrtShell.StartAction();
		rWrtShell.Push();
		rWrtShell.SetFlyFrmAttr( aTmp );
		//die Rahmenselektion wieder aufheben
		if(rWrtShell.IsFrmSelected())
		{
			rWrtShell.UnSelectFrm();
			rWrtShell.LeaveSelFrmMode();
		}
		rWrtShell.Pop();
		rWrtShell.EndAction();
	}
	EndDialog(RET_OK);
	return 0;
}

/*--------------------------------------------------------------------
	Beschreibung:
 --------------------------------------------------------------------*/

#if OSL_DEBUG_LEVEL < 2
inline
#endif
sal_uInt16 GetMaxWidth( SwColMgr* pColMgr, sal_uInt16 nCols )
{
	sal_uInt16 nMax = pColMgr->GetActualSize();
	if( --nCols )
		nMax -= pColMgr->GetGutterWidth() * nCols;
	return nMax;
}

static sal_uInt16 __FAR_DATA aPageRg[] = {
	RES_COL, RES_COL,
	0
};


DBG_NAME(columnhdl)



sal_uInt16 lcl_LineWidthToPos(sal_uLong nWidth)
{
	const sal_uInt16 nUShortWidth = (sal_uInt16)nWidth;
	for(sal_uInt16 i = 0; i < nLineCount; ++i)
		if(nUShortWidth == nLines[i])
			return i;
	return 0;
}



void SwColumnPage::ResetColWidth()
{
	if( nCols )
	{
		sal_uInt16 nWidth = GetMaxWidth( pColMgr, nCols );
        nWidth = nWidth / nCols;

		for(sal_uInt16 i = 0; i < nCols; ++i)
			nColWidth[i] = (long) nWidth;
	}

}

/*--------------------------------------------------------------------
	Beschreibung:	Jetzt als TabPage
 --------------------------------------------------------------------*/



SwColumnPage::SwColumnPage(Window *pParent, const SfxItemSet &rSet)

	: SfxTabPage(pParent, SW_RES(TP_COLUMN), rSet),

    aFLGroup(this,          SW_RES(FL_COLUMNS )),
    aClNrLbl(this,          SW_RES(FT_NUMBER  )),
    aCLNrEdt(this,          SW_RES(ED_NUMBER  )),
    aDefaultVS(this,        SW_RES(VS_DEFAULTS)),
    aBalanceColsCB(this,    SW_RES(CB_BALANCECOLS)),

    aFLLayout(this,         SW_RES(FL_LAYOUT)),
    aBtnUp(this,            SW_RES(BTN_DOWN)),
    aColumnFT(this,         SW_RES(FT_COLUMN)),
    aWidthFT(this,          SW_RES(FT_WIDTH)),
    aDistFT(this,           SW_RES(FT_DIST)),
    aLbl1(this,             SW_RES(FT_1)),
    aEd1(this,              SW_RES(ED_1)),
    aDistEd1(this,          SW_RES(ED_DIST1)),
    aLbl2(this,             SW_RES(FT_2)),
    aEd2(this,              SW_RES(ED_2)),
    aDistEd2(this,          SW_RES(ED_DIST2)),
    aLbl3(this,             SW_RES(FT_3)),
    aEd3(this,              SW_RES(ED_3)),
    aBtnDown(this,          SW_RES(BTN_UP)),
    aAutoWidthBox(this,     SW_RES(CB_AUTO_WIDTH)),

    aFLLineType(this,       SW_RES(FL_LINETYPE)),
    aLineTypeLbl(this,      SW_RES(FT_STYLE)),
    aLineTypeDLB(this,      SW_RES(LB_STYLE)),
    aLineHeightLbl(this,    SW_RES(FT_HEIGHT)),
    aLineHeightEdit(this,   SW_RES(ED_HEIGHT)),
    aLinePosLbl(this,       SW_RES(FT_POSITION)),
    aLinePosDLB(this,       SW_RES(LB_POSITION)),

    aVertFL(this,         SW_RES(FL_VERT)),
    aPropertiesFL(  this,    SW_RES( FL_PROPERTIES    )),
    aTextDirectionFT( this,  SW_RES( FT_TEXTDIRECTION )),
    aTextDirectionLB( this,  SW_RES( LB_TEXTDIRECTION )),

    aPgeExampleWN(this,     SW_RES(WN_BSP)),
    aFrmExampleWN(this,     SW_RES(WN_BSP)),

    pColMgr(0),

    nFirstVis(0),
    nMinWidth(MINLAY),
    pModifiedField(0),
    bFormat(sal_False),
	bFrm(sal_False),
	bHtmlMode(sal_False),
	bLockUpdate(sal_False)
{
    sal_uInt16 i;

	FreeResource();
	SetExchangeSupport();

	aBtnDown.SetAccessibleRelationMemberOf(&aFLLayout);
	aEd1.SetAccessibleRelationLabeledBy(&aWidthFT);
	aEd2.SetAccessibleRelationLabeledBy(&aWidthFT);
	aEd3.SetAccessibleRelationLabeledBy(&aWidthFT);
	aDistEd1.SetAccessibleRelationLabeledBy(&aDistFT);
	aDistEd2.SetAccessibleRelationLabeledBy(&aDistFT);
	aBtnUp.SetAccessibleRelationLabeledBy(&aColumnFT);
	aBtnDown.SetAccessibleRelationLabeledBy(&aColumnFT);

    aDefaultVS.SetHelpId(HID_COLUMN_VALUESET);
    aDefaultVS.SetColCount( 5 );
	aDefaultVS.SetStyle(  aDefaultVS.GetStyle()
							| WB_ITEMBORDER
							| WB_DOUBLEBORDER );

    for( i = 0; i < 5; i++)
		//Solution:Set accessible name one be one
		//aDefaultVS.InsertItem( i + 1, i );
		{
			String aItemText;
			switch( i )
			{
				case 0:
					aItemText =  SW_RESSTR( STR_COLUMN_VALUESET_ITEM0 ) ;
					break;
				case 1:
					aItemText =  SW_RESSTR( STR_COLUMN_VALUESET_ITEM1 ) ;
					break;
				case 2:
					aItemText =  SW_RESSTR( STR_COLUMN_VALUESET_ITEM2 ) ;
					break;
				case 3:
					aItemText =  SW_RESSTR( STR_COLUMN_VALUESET_ITEM3 );
					break;
				case 4:
					aItemText =  SW_RESSTR( STR_COLUMN_VALUESET_ITEM4 );
					break;
				default:
					break;	
			}
			aDefaultVS.InsertItem( i + 1,  aItemText, i );
		}

	aDefaultVS.SetSelectHdl(LINK(this, SwColumnPage, SetDefaultsHdl));

	// Controls fuer Zusaetzebereich beim MoreButton anmelden
    Link aCLNrLk = LINK(this, SwColumnPage, ColModify);
    aCLNrEdt.SetLoseFocusHdl(aCLNrLk);
    aCLNrEdt.SetUpHdl(aCLNrLk);
    aCLNrEdt.SetDownHdl(aCLNrLk);
    Link aLk = LINK(this, SwColumnPage, GapModify);
	aDistEd1.SetUpHdl(aLk);
	aDistEd1.SetDownHdl(aLk);
	aDistEd1.SetLoseFocusHdl(aLk);
	aDistEd2.SetUpHdl(aLk);
	aDistEd2.SetDownHdl(aLk);
	aDistEd2.SetLoseFocusHdl(aLk);

	aLk = LINK(this, SwColumnPage, EdModify);

	aEd1.SetUpHdl(aLk);
	aEd1.SetDownHdl(aLk);
	aEd1.SetLoseFocusHdl(aLk);

	aEd2.SetUpHdl(aLk);
	aEd2.SetDownHdl(aLk);
	aEd2.SetLoseFocusHdl(aLk);

	aEd3.SetUpHdl(aLk);
	aEd3.SetDownHdl(aLk);
	aEd3.SetLoseFocusHdl(aLk);

	aBtnUp.SetClickHdl(LINK(this, SwColumnPage, Up));
	aBtnDown.SetClickHdl(LINK(this, SwColumnPage, Down));
	aAutoWidthBox.SetClickHdl(LINK(this, SwColumnPage, AutoWidthHdl));

	aLk = LINK( this, SwColumnPage, UpdateColMgr );
	aLineTypeDLB.SetSelectHdl( aLk );
	aLineHeightEdit.SetModifyHdl( aLk );
	aLinePosDLB.SetSelectHdl( aLk );

		// Trennlinie
	aLineTypeDLB.SetUnit( FUNIT_POINT );
	aLineTypeDLB.SetSourceUnit( FUNIT_TWIP );
	for( i = 0; i < nLineCount; ++i )
		aLineTypeDLB.InsertEntry( 100 * nLines[ i ] );
}



SwColumnPage::~SwColumnPage()
{
	delete pColMgr;
}

/*--------------------------------------------------------------------
	Beschreibung:
 --------------------------------------------------------------------*/


void SwColumnPage::SetPageWidth(long nPageWidth)
{
    long nNewMaxWidth = static_cast< long >(aEd1.NormalizePercent(nPageWidth));

	aDistEd1.SetMax(nNewMaxWidth, FUNIT_TWIP);
	aDistEd2.SetMax(nNewMaxWidth, FUNIT_TWIP);
	aEd1.SetMax(nNewMaxWidth, FUNIT_TWIP);
	aEd2.SetMax(nNewMaxWidth, FUNIT_TWIP);
	aEd3.SetMax(nNewMaxWidth, FUNIT_TWIP);
}

/*--------------------------------------------------------------------
	Beschreibung:
 --------------------------------------------------------------------*/



void SwColumnPage::Reset(const SfxItemSet &rSet)
{
	sal_uInt16 nHtmlMode = ::GetHtmlMode((const SwDocShell*)SfxObjectShell::Current());
	if(nHtmlMode & HTMLMODE_ON)
	{
		bHtmlMode = sal_True;
		aAutoWidthBox.Enable(sal_False);
	}
	FieldUnit aMetric = ::GetDfltMetric(bHtmlMode);
	SetMetric(aEd1, aMetric);
	SetMetric(aEd2, aMetric);
	SetMetric(aEd3, aMetric);
	SetMetric(aDistEd1, aMetric);
	SetMetric(aDistEd2, aMetric);

	delete pColMgr;
	pColMgr = new SwColMgr(rSet);
	nCols 	= pColMgr->GetCount() ;
	aCLNrEdt.SetMax(Max((sal_uInt16)aCLNrEdt.GetMax(), (sal_uInt16)nCols));
	aCLNrEdt.SetLast(Max(nCols,(sal_uInt16)aCLNrEdt.GetMax()));

	if(bFrm)
	{
		if(bFormat)                     // hier gibt es keine Size
			pColMgr->SetActualWidth(FRAME_FORMAT_WIDTH);
		else
		{
			const SwFmtFrmSize& rSize = (const SwFmtFrmSize&)rSet.Get(RES_FRM_SIZE);
			const SvxBoxItem& rBox = (const SvxBoxItem&) rSet.Get(RES_BOX);
			pColMgr->SetActualWidth((sal_uInt16)rSize.GetSize().Width() - rBox.GetDistance());
		}
	}
    if(aBalanceColsCB.IsVisible())
	{
        const SfxPoolItem* pItem;
        if( SFX_ITEM_SET == rSet.GetItemState( RES_COLUMNBALANCE, sal_False, &pItem ))
			aBalanceColsCB.Check(!((const SwFmtNoBalancedColumns*)pItem)->GetValue());
		else
			aBalanceColsCB.Check( sal_True );
	}

    //text direction
    if( SFX_ITEM_AVAILABLE <= rSet.GetItemState( RES_FRAMEDIR ) )
	{
        const SvxFrameDirectionItem& rItem = (const SvxFrameDirectionItem&)rSet.Get(RES_FRAMEDIR);
        sal_uInt32 nVal  = rItem.GetValue();
        sal_uInt16 nPos = aTextDirectionLB.GetEntryPos( (void*) nVal );
        aTextDirectionLB.SelectEntryPos( nPos );
        aTextDirectionLB.SaveValue();
	}

    Init();
	ActivatePage( rSet );
}

/*--------------------------------------------------------------------
	Beschreibung:	TabPage erzeugen
 --------------------------------------------------------------------*/



SfxTabPage* SwColumnPage::Create(Window *pParent, const SfxItemSet &rSet)
{
	return new SwColumnPage(pParent, rSet);
}

/*--------------------------------------------------------------------
	Beschreibung:	Attribute in den Set stopfen bei OK
 --------------------------------------------------------------------*/



sal_Bool SwColumnPage::FillItemSet(SfxItemSet &rSet)
{
    if(aCLNrEdt.HasChildPathFocus())
        aCLNrEdt.GetDownHdl().Call(&aCLNrEdt);
    // Im ItemSet setzen
	// Die aktuellen Einstellungen sind
	// schon vorhanden
	//
	const SfxPoolItem* pOldItem;
	const SwFmtCol& rCol = pColMgr->GetColumns();
	if(0 == (pOldItem = GetOldItem( rSet, RES_COL )) ||
				rCol != *pOldItem )
		rSet.Put(rCol);

	if(aBalanceColsCB.IsVisible() )
	{
		rSet.Put(SwFmtNoBalancedColumns(!aBalanceColsCB.IsChecked() ));
	}
    sal_uInt16 nPos;
    if( aTextDirectionLB.IsVisible() &&
        ( nPos = aTextDirectionLB.GetSelectEntryPos() ) !=
                                            aTextDirectionLB.GetSavedValue() )
	{
        sal_uInt32 nDirection = (sal_uInt32)(sal_IntPtr)aTextDirectionLB.GetEntryData( nPos );
        rSet.Put( SvxFrameDirectionItem( (SvxFrameDirection)nDirection, RES_FRAMEDIR));
	}
    return sal_True;
}

/*--------------------------------------------------------------------
	Beschreibung:	ColumnManager updaten
 --------------------------------------------------------------------*/



IMPL_LINK( SwColumnPage, UpdateColMgr, void *, /*pField*/ )
{
	long nGutterWidth = pColMgr->GetGutterWidth();
	if(nCols > 1)
	{
			// Ermitteln, ob die schmalste Spalte zu schmal ist
			// fuer den eingestellten Spaltenabstand
		long nMin = nColWidth[0];
		sal_uInt16 i;

		for( i = 1; i < nCols; ++i)
			nMin = Min(nMin, nColWidth[i]);

		sal_Bool bAutoWidth = aAutoWidthBox.IsChecked();
		if(!bAutoWidth)
		{
			pColMgr->SetAutoWidth(sal_False);
				// falls der Benutzer nicht die Gesamtbreite vergeben hat,
				// den fehlenden Betrag auf die letzte Spalte addieren.
			long nSum = 0;
			for(i = 0; i < nCols; ++i)
				nSum += nColWidth[i];
			nGutterWidth = 0;
			for(i = 0; i < nCols - 1; ++i)
				nGutterWidth += nColDist[i];
			nSum += nGutterWidth;

			long nMaxW = pColMgr->GetActualSize();

			if( nSum < nMaxW  )
				nColWidth[nCols - 1] += nMaxW - nSum;

            pColMgr->SetColWidth( 0, static_cast< sal_uInt16 >(nColWidth[0] + (sal_uInt16)nColDist[0]/2) );
			for( i = 1; i < nCols-1; ++i )
			{
				long nActDist = (nColDist[i] + nColDist[i - 1]) / 2;
				pColMgr->SetColWidth( i, (sal_uInt16)nColWidth[i] + (sal_uInt16)nActDist );
			}
            pColMgr->SetColWidth( nCols-1, static_cast< sal_uInt16 >(nColWidth[nCols-1] + nColDist[nCols -2]/2) );

		}

			// keins ist ausgeschaltet
        const sal_uInt16 nPos = aLineTypeDLB.GetSelectEntryPos();
        sal_Bool bEnable = 0 != nPos;
		aLineHeightEdit.Enable( bEnable );
		aLineHeightLbl.Enable( bEnable );
		if( !bEnable )
			pColMgr->SetNoLine();
		else if( LISTBOX_ENTRY_NOTFOUND != nPos )
		{
			pColMgr->SetLineWidthAndColor(nLines[nPos - 1], Color(COL_BLACK) );
			pColMgr->SetAdjust( SwColLineAdj(
									aLinePosDLB.GetSelectEntryPos() + 1) );
			pColMgr->SetLineHeightPercent((short)aLineHeightEdit.GetValue());
			bEnable = pColMgr->GetLineHeightPercent() != 100;
		}
		aLinePosLbl.Enable( bEnable );
		aLinePosDLB.Enable( bEnable );
	}
	else
	{
		pColMgr->NoCols();
        nCols = 0;
	}

	//Maximalwerte setzen
	aCLNrEdt.SetMax(Max(1L,
		Min(long(nMaxCols), long( pColMgr->GetActualSize() / (nGutterWidth + MINLAY)) )));
	aCLNrEdt.SetLast(aCLNrEdt.GetMax());
	aCLNrEdt.Reformat();

	//Beispielfenster anregen
	if(!bLockUpdate)
	{
		if(bFrm)
		{
			aFrmExampleWN.SetColumns( pColMgr->GetColumns() );
			aFrmExampleWN.Invalidate();
		}
		else
			aPgeExampleWN.Invalidate();
	}

	return 0;
}

/*------------------------------------------------------------------------
 Beschreibung:	Initialisierung
------------------------------------------------------------------------*/



void SwColumnPage::Init()
{
	aCLNrEdt.SetValue(nCols);

    sal_Bool bAutoWidth = pColMgr->IsAutoWidth() || bHtmlMode;
    aAutoWidthBox.Check( bAutoWidth );

    sal_Int32 nColumnWidthSum = 0;
    // Setzen der Breiten
    sal_uInt16 i;
    for(i = 0; i < nCols; ++i)
	{
		nColWidth[i] = pColMgr->GetColWidth(i);
        nColumnWidthSum += nColWidth[i];
		if(i < nCols - 1)
			nColDist[i] = pColMgr->GetGutterWidth(i);
	}

	if( 1 < nCols )
	{
        // #97495# make sure that the automatic column widht's are always equal
        if(bAutoWidth)
        {
            nColumnWidthSum /= nCols;
            for(i = 0; i < nCols; ++i)
                nColWidth[i] = nColumnWidthSum;
        }
        SwColLineAdj eAdj = pColMgr->GetAdjust();
		if( COLADJ_NONE == eAdj )		// der Dialog kennt kein NONE!
		{
			eAdj = COLADJ_TOP;
			//ohne Adjust auch kein Linientyp
			aLineTypeDLB.SelectEntryPos( 0 );
			aLineHeightEdit.SetValue( 100 );
		}
		else
		{
			aLineTypeDLB.SelectEntryPos( lcl_LineWidthToPos(( pColMgr->GetLineWidth() )) + 1);
			aLineHeightEdit.SetValue( pColMgr->GetLineHeightPercent() );
		}
        aLinePosDLB.SelectEntryPos( static_cast< sal_uInt16 >(eAdj - 1) );
	}
	else
	{
		aLinePosDLB.SelectEntryPos( 0 );
		aLineTypeDLB.SelectEntryPos( 0 );
		aLineHeightEdit.SetValue( 100 );
	}

	UpdateCols();
	Update();

		// Maximale Spaltenzahl setzen
		// Werte kleiner als 1 sind nicht erlaubt
	aCLNrEdt.SetMax(Max(1L,
		Min(long(nMaxCols), long( pColMgr->GetActualSize() / nMinWidth) )));
}

/*------------------------------------------------------------------------
 Beschreibung:	Die Anzahl der Spalten hat sich veraendert -- hier werden
				die Controls fuer die Bearbeitung der Spalten entsprechend
				der Spaltenzahl en- oder disabled.
				Falls es mehr als nVisCols (= 3) Spalten gibt, werden
				alle Edit enabled und die Buttons fuer das Scrollen
				ebenfalls.
				Andernfalls werden die Edits jeweils fuer die entsprechenden
				Spaltenzahl enabled; eine Spalte kann nicht bearbeitet werden.
------------------------------------------------------------------------*/



void SwColumnPage::UpdateCols()
{
	sal_Bool bEnableBtns= sal_False;
	sal_Bool bEnable12	= sal_False;
	sal_Bool bEnable3	= sal_False;
	const sal_Bool bEdit = !aAutoWidthBox.IsChecked();
	if ( nCols > nVisCols )
	{
		bEnableBtns = sal_True && !bHtmlMode;
		bEnable12 = bEnable3 = bEdit;
	}
	else if( bEdit )
	{
		// hier gibt es absichtlich kaum noch breaks
		switch(nCols)
		{
			case 3: bEnable3 = sal_True;
			case 2: bEnable12= sal_True; break;
			default: /* do nothing */;
		}
	}
	aEd1.Enable( bEnable12 );
	aDistEd1.Enable(nCols > 1);
	aEd2.Enable( bEnable12 );
	aDistEd2.Enable(bEnable3);
	aEd3.Enable( bEnable3  );
    aLbl1.Enable(bEnable12 );
    aLbl2.Enable(bEnable12 );
    aLbl3.Enable(bEnable3  );
	aBtnUp.Enable( bEnableBtns );
	aBtnDown.Enable( bEnableBtns );

	const sal_Bool bEnable = nCols > 1;
	if( !bEnable )
	{
		aLinePosDLB.Enable( sal_False );
		aLinePosLbl.Enable( sal_False );
	}
	aLineHeightEdit.Enable( bEnable );
	aLineHeightLbl.Enable( bEnable );
	aLineTypeDLB.Enable( bEnable );
	aLineTypeLbl.Enable( bEnable );
	aAutoWidthBox.Enable( bEnable && !bHtmlMode );
}

void SwColumnPage::SetLabels( sal_uInt16 nVis )
{
	String sLbl( '~' );

	String sLbl2( String::CreateFromInt32( nVis + 1 ));
	String tmp1(sLbl2);
	sLbl2.Insert(sLbl, sLbl2.Len() - 1);
    aLbl1.SetText(sLbl2);

	sLbl2 = String::CreateFromInt32( nVis + 2 );
	String tmp2(sLbl2);
	sLbl2.Insert(sLbl, sLbl2.Len() - 1);
    aLbl2.SetText(sLbl2);

	sLbl2 = String::CreateFromInt32( nVis + 3 );
	String tmp3(sLbl2);
	sLbl2.Insert(sLbl, sLbl2.Len() - 1);
    aLbl3.SetText(sLbl2);
	String sColumnWidth = SW_RESSTR( STR_ACCESS_COLUMN_WIDTH ) ;
	sColumnWidth.SearchAndReplaceAscii("%1", tmp1);
	aEd1.SetAccessibleName(sColumnWidth);

	sColumnWidth = SW_RESSTR( STR_ACCESS_COLUMN_WIDTH ) ;
	sColumnWidth.SearchAndReplaceAscii("%1", tmp2);
	aEd2.SetAccessibleName(sColumnWidth);

	sColumnWidth = SW_RESSTR( STR_ACCESS_COLUMN_WIDTH ) ;
	sColumnWidth.SearchAndReplaceAscii("%1", tmp3);
	aEd3.SetAccessibleName(sColumnWidth);
	
	String sDist = SW_RESSTR( STR_ACCESS_PAGESETUP_SPACING ) ;
	String sDist1 = sDist;
	sDist1.SearchAndReplaceAscii("%1", tmp1);
	sDist1.SearchAndReplaceAscii("%2", tmp2);
	aDistEd1.SetAccessibleName(sDist1);
	
	String sDist2 = sDist;
	sDist2.SearchAndReplaceAscii("%1", tmp2);
	sDist2.SearchAndReplaceAscii("%2", tmp3);
	aDistEd2.SetAccessibleName(sDist2);
}

/*------------------------------------------------------------------------
 Beschreibung:	Handler, der bei einer Veraenderung der Spaltenzahl
				gerufen wird.
				Eine Aenderung der Spaltenzahl ueberschreibt eventuelle
				Breiteneinstellungen des Benutzers; alle Spalten sind
				gleich breit.
------------------------------------------------------------------------*/

IMPL_LINK( SwColumnPage, ColModify, NumericField *, pNF )
{
    nCols = (sal_uInt16)aCLNrEdt.GetValue();
    //#107890# the handler is also called from LoseFocus()
    //then no change has been made and thus no action should be taken
	// #i17816# changing the displayed types within the ValueSet
	//from two columns to two columns with different settings doesn't invalidate the
	// example windows in ::ColModify()
// the pColMgr->GetCount()'s return is some how bugged,
// it will return 0 when actual count is 1, so fix it.
    //if(!pNF ||(pColMgr->GetCount() != nCols))
	int nTemp = pColMgr->GetCount();
	if(nTemp == 0) nTemp = 1;
    if( nTemp != nCols )
    {
        if(pNF)
            aDefaultVS.SetNoSelection();
        long nDist = static_cast< long >(aDistEd1.DenormalizePercent(aDistEd1.GetValue(FUNIT_TWIP)));
        pColMgr->SetCount(nCols, (sal_uInt16)nDist);
        for(sal_uInt16 i = 0; i < nCols; i++)
            nColDist[i] = nDist;
        nFirstVis = 0;
        SetLabels( nFirstVis );
        UpdateCols();
        ResetColWidth();
        Update();
    }

	return 0;
}

/*------------------------------------------------------------------------
 Beschreibung:	Modify- Handler fuer eine Aenderung der Spaltenbreite
				oder des Spaltenabstandes.
				Diese Aenderungen wirken sich erst zeitversetzt aus.
				Durch eine Aenderung der Spaltenbreite wird die automatische
				Berechnung der Spaltenbreite ausser Kraft gesetzt; erst
				eine Aenderung der Spaltenzahl kehrt wieder zu diesem
				Default zurueck.
------------------------------------------------------------------------*/



IMPL_LINK( SwColumnPage, GapModify, PercentField *, pFld )
{
    long nActValue = static_cast< long >(pFld->DenormalizePercent(pFld->GetValue(FUNIT_TWIP)));
	if(nCols < 2)
		return 0;
	if(aAutoWidthBox.IsChecked())
	{
		sal_uInt16 nMaxGap = pColMgr->GetActualSize() - nCols * MINLAY;
		DBG_ASSERT(nCols, "Abstand kann nicht ohne Spalten eingestellt werden");
		nMaxGap /= nCols - 1;
		if(nActValue > nMaxGap)
		{
			nActValue = nMaxGap;
            aDistEd1.SetPrcntValue(aDistEd1.NormalizePercent(nMaxGap), FUNIT_TWIP);
		}
		pColMgr->SetGutterWidth((sal_uInt16)nActValue);
		for(sal_uInt16 i = 0; i < nCols; i++)
			nColDist[i] = nActValue;

		ResetColWidth();
		UpdateCols();
	}
	else

	{
		sal_uInt16 nOffset = 0;
		if(pFld == &aDistEd2)
		{
			nOffset = 1;
		}
		long nDiff = nActValue - nColDist[nFirstVis + nOffset];
		if(nDiff)
		{
			long nLeft = nColWidth[nFirstVis + nOffset];
			long nRight = nColWidth[nFirstVis + nOffset + 1];
			if(nLeft + nRight + 2 * MINLAY < nDiff)
				nDiff = nLeft + nRight - 2 * MINLAY;
			if(nDiff < nRight - MINLAY)
			{
				nRight -= nDiff;
			}
			else
			{
				long nTemp = nDiff - nRight + MINLAY;
				nRight = MINLAY;
				if(nLeft > nTemp - MINLAY)
				{
					nLeft -= nTemp;
					nTemp = 0;
				}
				else
				{
					nTemp -= nLeft + MINLAY;
					nLeft = MINLAY;
				}
				nDiff = nTemp;
			}
			nColWidth[nFirstVis + nOffset] = nLeft;
			nColWidth[nFirstVis + nOffset + 1] = nRight;
			nColDist[nFirstVis + nOffset] += nDiff;

			pColMgr->SetColWidth( nFirstVis + nOffset, sal_uInt16(nLeft) );
			pColMgr->SetColWidth( nFirstVis + nOffset + 1, sal_uInt16(nRight) );
			pColMgr->SetGutterWidth( sal_uInt16(nColDist[nFirstVis + nOffset]), nFirstVis + nOffset );
		}

	}
	Update();
	return 0;
}

/*------------------------------------------------------------------------
 Beschreibung:
------------------------------------------------------------------------*/



IMPL_LINK( SwColumnPage, EdModify, PercentField *, pField )
{
	pModifiedField = pField;
	Timeout(0);
	return 0;
}
/*------------------------------------------------------------------------
 Beschreibung:	Handler hinter der Checkbox fuer automatische Breite.
				Ist die Box gecheckt, koennen keine expliziten Werte
				fuer die Spaltenbreite eingegeben werden.
------------------------------------------------------------------------*/



IMPL_LINK( SwColumnPage, AutoWidthHdl, CheckBox *, pBox )
{
    long nDist = static_cast< long >(aDistEd1.DenormalizePercent(aDistEd1.GetValue(FUNIT_TWIP)));
	pColMgr->SetCount(nCols, (sal_uInt16)nDist);
	for(sal_uInt16 i = 0; i < nCols; i++)
		nColDist[i] = nDist;
	if(pBox->IsChecked())
	{
		pColMgr->SetGutterWidth(sal_uInt16(nDist));
		ResetColWidth();
	}
	pColMgr->SetAutoWidth(pBox->IsChecked(), sal_uInt16(nDist));
	UpdateCols();
	Update();
	return 0;
}

/*------------------------------------------------------------------------
 Beschreibung:	Raufscrollen der Inhalte der Edits.
------------------------------------------------------------------------*/

IMPL_LINK( SwColumnPage, Up, Button *, EMPTYARG )
{
	if( nFirstVis )
	{
		--nFirstVis;
		SetLabels( nFirstVis );
		Update();
	}
	return 0;
}
/*------------------------------------------------------------------------
 Beschreibung:	Runterscrollen der Inhalte der Edits.
------------------------------------------------------------------------*/

IMPL_LINK( SwColumnPage, Down, Button *, EMPTYARG )
{
	if( nFirstVis + nVisCols < nCols )
	{
		++nFirstVis;
		SetLabels( nFirstVis );
		Update();
	}
	return 0;
}
/*------------------------------------------------------------------------
 Beschreibung:	Relikt aus alten Zeiten - jetzt direkt ohne time
 * 				Timer- Handler; angetriggert durch eine Aenderung der
				Spaltenbreite oder des Spaltenabstandes.
------------------------------------------------------------------------*/

IMPL_LINK( SwColumnPage, Timeout, Timer *, EMPTYARG )
{
	DBG_PROFSTART(columnhdl) ;
	if(pModifiedField)
	{
			// Finden der veraenderten Spalte
		sal_uInt16 nChanged = nFirstVis;
		if(pModifiedField == &aEd2)
			++nChanged;
		else if(pModifiedField == &aEd3)
			nChanged += 2;
		/*else if(pModifiedField == &aEd4)
			nChanged += 3;*/

		long nNewWidth = (sal_uInt16)
			pModifiedField->DenormalizePercent(pModifiedField->GetValue(FUNIT_TWIP));
		long nDiff = nNewWidth - nColWidth[nChanged];

		// wenn es die letzte Spalte ist
		if(nChanged == nCols - 1)
		{
			nColWidth[0] -= nDiff;
			if(nColWidth[0] < (long)nMinWidth)
			{
				nNewWidth -= nMinWidth - nColWidth[0];
				nColWidth[0] = nMinWidth;
			}

		}
		else if(nDiff)
		{
			nColWidth[nChanged + 1] -= nDiff;
			if(nColWidth[nChanged + 1] < (long) nMinWidth)
			{
				nNewWidth -= nMinWidth - nColWidth[nChanged + 1];
				nColWidth[nChanged + 1] = nMinWidth;
			}
		}
		nColWidth[nChanged] = nNewWidth;
		pModifiedField = 0;
	}
	Update();
	DBG_PROFSTOP(columnhdl) ;
	return 0;
}
/*------------------------------------------------------------------------
 Beschreibung:	Aktualisierung der Anzeige
------------------------------------------------------------------------*/



void SwColumnPage::Update()
{
	aBalanceColsCB.Enable(nCols > 1);
	if(nCols >= 2)
	{
        aEd1.SetPrcntValue(aEd1.NormalizePercent(nColWidth[nFirstVis]), FUNIT_TWIP);
        aDistEd1.SetPrcntValue(aDistEd1.NormalizePercent(nColDist[nFirstVis]), FUNIT_TWIP);
        aEd2.SetPrcntValue(aEd2.NormalizePercent(nColWidth[nFirstVis + 1]), FUNIT_TWIP);
		if(nCols >= 3)
		{
            aDistEd2.SetPrcntValue(aDistEd2.NormalizePercent(nColDist[nFirstVis + 1]), FUNIT_TWIP);
            aEd3.SetPrcntValue(aEd3.NormalizePercent(nColWidth[nFirstVis + 2]), FUNIT_TWIP);
		}
		else
		{
			aEd3.SetText(aEmptyStr);
			aDistEd2.SetText(aEmptyStr);
		}
	}
	else
	{
		aEd1.SetText(aEmptyStr);
		aEd2.SetText(aEmptyStr);
		aEd3.SetText(aEmptyStr);
		aDistEd1.SetText(aEmptyStr);
		aDistEd2.SetText(aEmptyStr);
	}
	UpdateColMgr(0);
}

/*--------------------------------------------------------------------
	Beschreibung:	Update Bsp
 --------------------------------------------------------------------*/



void SwColumnPage::ActivatePage(const SfxItemSet& rSet)
{
	if(!bFrm)
	{
		if( SFX_ITEM_SET == rSet.GetItemState( SID_ATTR_PAGE_SIZE ))
		{
			const SvxSizeItem& rSize = (const SvxSizeItem&)rSet.Get(
												SID_ATTR_PAGE_SIZE);
			const SvxLRSpaceItem& rLRSpace = (const SvxLRSpaceItem&)rSet.Get(
																RES_LR_SPACE );
			const SvxBoxItem& rBox = (const SvxBoxItem&) rSet.Get(RES_BOX);
            sal_uInt16 nActWidth = static_cast< sal_uInt16 >(rSize.GetSize().Width()
                            - rLRSpace.GetLeft() - rLRSpace.GetRight() - rBox.GetDistance());

			if( pColMgr->GetActualSize() != nActWidth)
			{
				pColMgr->SetActualWidth(nActWidth);
				ColModify( 0 );
				UpdateColMgr( 0 );
			}
		}
		aFrmExampleWN.Hide();
		aPgeExampleWN.UpdateExample( rSet, pColMgr );
		aPgeExampleWN.Show();

	}
	else
	{
		aPgeExampleWN.Hide();
		aFrmExampleWN.Show();

		// Size
        const SwFmtFrmSize& rSize = (const SwFmtFrmSize&)rSet.Get(RES_FRM_SIZE);
        const SvxBoxItem& rBox = (const SvxBoxItem&) rSet.Get(RES_BOX);

        long nDistance = rBox.GetDistance();
		const sal_uInt16 nTotalWish = bFormat ? FRAME_FORMAT_WIDTH : sal_uInt16(rSize.GetWidth() - 2 * nDistance);

		// Maximalwerte der Spaltenbreiten setzen
		SetPageWidth(nTotalWish);

		if(pColMgr->GetActualSize() != nTotalWish)
		{
			pColMgr->SetActualWidth(nTotalWish);
			Init();
		}
		sal_Bool bPercent;
		// im Rahmenformat nur relative Angaben
		if ( bFormat || (rSize.GetWidthPercent() && rSize.GetWidthPercent() != 0xff) )
		{
			// Wert fuer 100% setzen
			aEd1.SetRefValue(nTotalWish);
			aEd2.SetRefValue(nTotalWish);
			aEd3.SetRefValue(nTotalWish);
			aDistEd1.SetRefValue(nTotalWish);
			aDistEd2.SetRefValue(nTotalWish);

			// Auf %-Darstellung umschalten
			bPercent = sal_True;
		}
		else
			bPercent = sal_False;

		aEd1.ShowPercent(bPercent);
		aEd2.ShowPercent(bPercent);
		aEd3.ShowPercent(bPercent);
		aDistEd1.ShowPercent(bPercent);
		aDistEd2.ShowPercent(bPercent);
		aDistEd1.MetricField::SetMin(0);
		aDistEd2.MetricField::SetMin(0);
	}
	Update();
}

/*--------------------------------------------------------------------
	Beschreibung:
 --------------------------------------------------------------------*/



int SwColumnPage::DeactivatePage(SfxItemSet *_pSet)
{
    if(_pSet)
        FillItemSet(*_pSet);

	return sal_True;
}



sal_uInt16* SwColumnPage::GetRanges()
{
	return aPageRg;
}

/*--------------------------------------------------------------------
	Beschreibung:
 --------------------------------------------------------------------*/



IMPL_LINK( SwColumnPage, SetDefaultsHdl, ValueSet *, pVS )
{
	sal_uInt16 nItem = pVS->GetSelectItemId();
	if( nItem < 4 )
	{
		aCLNrEdt.SetValue( nItem );
		aAutoWidthBox.Check();
        aDistEd1.SetPrcntValue(0);
		ColModify(0);
	}
	else
	{
		bLockUpdate = sal_True;
		aCLNrEdt.SetValue( 2 );
		aAutoWidthBox.Check(sal_False);
        aDistEd1.SetPrcntValue(0);
		ColModify(0);
		// jetzt noch das Breitenverhaeltnisse auf 2 : 1 bzw. 1 : 2 stellen
		sal_uInt16 nSmall = pColMgr->GetActualSize()  / 3;
		if(nItem == 4)
		{
            aEd2.SetPrcntValue(aEd2.NormalizePercent(long(nSmall)), FUNIT_TWIP);
			pModifiedField = &aEd2;
		}
		else
		{
            aEd1.SetPrcntValue(aEd1.NormalizePercent(long(nSmall)), FUNIT_TWIP);
			pModifiedField = &aEd1;
		}
		bLockUpdate = sal_False;
		Timeout(0);

	}
	return 0;
}

/*-----------------25.10.96 11.41-------------------

--------------------------------------------------*/


void SwColumnPage::SetFrmMode(sal_Bool bMod)
{
	bFrm = bMod;
}
/* -----------------------------2002/06/19 13:08------------------------------

 ---------------------------------------------------------------------------*/
void SwColumnPage::SetInSection(sal_Bool bSet)
{
    if(!SW_MOD()->GetCTLOptions().IsCTLFontEnabled())
        return;

    aVertFL.Show(bSet);
    aPropertiesFL.Show(bSet);
    aTextDirectionFT.Show(bSet);
    aTextDirectionLB.Show(bSet);
    if(bSet)
    {
        //resize line type FixedLine
        Point aLtPos = aFLLineType.GetPosPixel();
        Point aPropPos = aPropertiesFL.GetPosPixel();
        Size aSz = aFLLineType.GetSizePixel();
        aSz.Width() = aPropPos.X() - aLtPos.X() - LogicToPixel(Size(8, 8), MAP_APPFONT).Width();
        aFLLineType.SetSizePixel(aSz);
    }
    else
    {
        Size aSz = aFLLineType.GetSizePixel();
        aSz.Width() = LogicToPixel(Size(248, 248), MAP_APPFONT).Width();
        aFLLineType.SetSizePixel(aSz);
    }
}

/*-----------------07.03.97 08.33-------------------

--------------------------------------------------*/


void ColumnValueSet::UserDraw( const UserDrawEvent& rUDEvt )
{
	OutputDevice*  pDev = rUDEvt.GetDevice();
    const StyleSettings& rStyleSettings = GetSettings().GetStyleSettings();

	Rectangle aRect = rUDEvt.GetRect();
	sal_uInt16	nItemId = rUDEvt.GetItemId();
	long nRectWidth = aRect.GetWidth();
	long nRectHeight = aRect.GetHeight();

	Point aBLPos = aRect.TopLeft();
    Color aFillColor(pDev->GetFillColor());
    Color aLineColor(pDev->GetLineColor());
    pDev->SetFillColor(rStyleSettings.GetFieldColor());
    pDev->SetLineColor(SwViewOption::GetFontColor());

	long nStep = Abs(Abs(nRectHeight * 95 /100) / 11);
	long nTop = (nRectHeight - 11 * nStep ) / 2;
    sal_uInt16 nCols = 0;
	long nStarts[3];
	long nEnds[3];
	nStarts[0] = nRectWidth * 10 / 100;
	switch( nItemId )
	{
		case 1:
			nEnds[0] = nRectWidth * 9 / 10;
			nCols = 1;
		break;
		case 2: nCols = 2;
			nEnds[0] = nRectWidth * 45 / 100;
			nStarts[1] = nEnds[0] + nStep;
			nEnds[1] = nRectWidth * 9 / 10;
		break;
		case 3: nCols = 3;
			nEnds[0] 	= nRectWidth * 30 / 100;
			nStarts[1] 	= nEnds[0] + nStep;
			nEnds[1] 	= nRectWidth * 63 / 100;
			nStarts[2] 	= nEnds[1] + nStep;
			nEnds[2] 	= nRectWidth * 9 / 10;
		break;
		case 4: nCols = 2;
			nEnds[0] = nRectWidth * 63 / 100;
			nStarts[1] = nEnds[0] + nStep;
			nEnds[1] = nRectWidth * 9 / 10;
		break;
		case 5: nCols = 2;
			nEnds[0] = nRectWidth * 30 / 100;
			nStarts[1] = nEnds[0] + nStep;
			nEnds[1] = nRectWidth * 9 / 10;
		break;
	}
	for(sal_uInt16 j = 0; j < nCols; j++ )
	{
		Point aStart(aBLPos.X() + nStarts[j], 0);
		Point aEnd(aBLPos.X() + nEnds[j], 0);
		for( sal_uInt16 i = 0; i < 12; i ++)
		{
			aStart.Y() = aEnd.Y() = aBLPos.Y() + nTop + i * nStep;
			pDev->DrawLine(aStart, aEnd);
		}
	}
    pDev->SetFillColor(aFillColor);
    pDev->SetLineColor(aLineColor);
}

/*-----------------07.03.97 08.48-------------------

--------------------------------------------------*/

ColumnValueSet::~ColumnValueSet()
{
}
/* -----------------------------02.04.2002 16:01------------------------------

 ---------------------------------------------------------------------------*/
void ColumnValueSet::DataChanged( const DataChangedEvent& rDCEvt )
{
	if ( (rDCEvt.GetType() == DATACHANGED_SETTINGS) &&
         (rDCEvt.GetFlags() & SETTINGS_STYLE) )
    {
        Format();
    }
    ValueSet::DataChanged( rDCEvt );
}