| /************************************************************** |
| * |
| * Licensed to the Apache Software Foundation (ASF) under one |
| * or more contributor license agreements. See the NOTICE file |
| * distributed with this work for additional information |
| * regarding copyright ownership. The ASF licenses this file |
| * to you under the Apache License, Version 2.0 (the |
| * "License"); you may not use this file except in compliance |
| * with the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, |
| * software distributed under the License is distributed on an |
| * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| * KIND, either express or implied. See the License for the |
| * specific language governing permissions and limitations |
| * under the License. |
| * |
| *************************************************************/ |
| |
| |
| |
| // MARKER(update_precomp.py): autogen include statement, do not remove |
| #include "precompiled_sw.hxx" |
| #ifdef SW_DLLIMPLEMENTATION |
| #undef SW_DLLIMPLEMENTATION |
| #endif |
| |
| |
| #include <mailmergewizard.hxx> |
| #include <mmdocselectpage.hxx> |
| #include <mmoutputtypepage.hxx> |
| #include <mmaddressblockpage.hxx> |
| #include <mmpreparemergepage.hxx> |
| #include <mmmergepage.hxx> |
| #include <mmgreetingspage.hxx> |
| #include <mmoutputpage.hxx> |
| #include <mmlayoutpage.hxx> |
| #include <mmconfigitem.hxx> |
| #include <swabstdlg.hxx> |
| #ifndef _DBUI_HRC |
| #include <dbui.hrc> |
| #endif |
| #include <view.hxx> |
| #ifndef _DBMGR_HXX |
| #include <dbmgr.hxx> |
| #endif |
| #include <sfx2/viewfrm.hxx> |
| #include <wrtsh.hxx> |
| #include <sfx2/viewfrm.hxx> |
| #include "vcl/msgbox.hxx" // RET_CANCEL |
| |
| #include <helpid.h> |
| #include <dbui.hrc> |
| #include <mailmergewizard.hrc> |
| |
| using namespace svt; |
| using namespace ::com::sun::star; |
| /*-- 01.04.2004 16:52:49--------------------------------------------------- |
| |
| -----------------------------------------------------------------------*/ |
| SwMailMergeWizard::SwMailMergeWizard(SwView& rView, SwMailMergeConfigItem& rItem) : |
| RoadmapWizard(&rView.GetViewFrame()->GetWindow(), |
| SW_RES(DLG_MAILMERGEWIZARD), |
| WZB_NEXT|WZB_PREVIOUS|WZB_FINISH|WZB_CANCEL|WZB_HELP), |
| m_pSwView(&rView), |
| m_bDocumentLoad( false ), |
| m_rConfigItem(rItem), |
| m_sStarting( SW_RES( ST_STARTING )), |
| m_sDocumentType( SW_RES( ST_DOCUMETNTYPE )), |
| m_sAddressBlock( SW_RES( ST_ADDRESSBLOCK )), |
| m_sAddressList( SW_RES( ST_ADDRESSLIST )), |
| m_sGreetingsLine( SW_RES( ST_GREETINGSLINE )), |
| m_sLayout( SW_RES( ST_LAYOUT )), |
| m_sPrepareMerge( SW_RES( ST_PREPAREMERGE )), |
| m_sMerge( SW_RES( ST_MERGE )), |
| m_sOutput( SW_RES( ST_OUTPUT )), |
| m_sFinish( SW_RES( ST_FINISH )), |
| m_nRestartPage( MM_DOCUMENTSELECTPAGE ) |
| { |
| FreeResource(); |
| ShowButtonFixedLine(sal_True); |
| defaultButton(WZB_NEXT); |
| enableButtons(WZB_FINISH, sal_False); |
| |
| m_pFinish->SetText(m_sFinish); |
| m_pNextPage->SetHelpId(HID_MM_NEXT_PAGE); |
| m_pPrevPage->SetHelpId(HID_MM_PREV_PAGE); |
| |
| //#i51949# no output type page visible if e-Mail is not supported |
| if(rItem.IsMailAvailable()) |
| declarePath( |
| 0, |
| MM_DOCUMENTSELECTPAGE, |
| MM_OUTPUTTYPETPAGE, |
| MM_ADDRESSBLOCKPAGE, |
| MM_GREETINGSPAGE, |
| MM_LAYOUTPAGE, |
| MM_PREPAREMERGEPAGE, |
| MM_MERGEPAGE, |
| MM_OUTPUTPAGE, |
| WZS_INVALID_STATE |
| ); |
| else |
| declarePath( |
| 0, |
| MM_DOCUMENTSELECTPAGE, |
| MM_ADDRESSBLOCKPAGE, |
| MM_GREETINGSPAGE, |
| MM_LAYOUTPAGE, |
| MM_PREPAREMERGEPAGE, |
| MM_MERGEPAGE, |
| MM_OUTPUTPAGE, |
| WZS_INVALID_STATE |
| ); |
| |
| ActivatePage(); |
| UpdateRoadmap(); |
| } |
| /*-- 01.04.2004 16:52:53--------------------------------------------------- |
| |
| -----------------------------------------------------------------------*/ |
| SwMailMergeWizard::~SwMailMergeWizard() |
| { |
| } |
| /*-- 01.04.2004 16:52:53--------------------------------------------------- |
| |
| -----------------------------------------------------------------------*/ |
| OWizardPage* SwMailMergeWizard::createPage(WizardState _nState) |
| { |
| OWizardPage* pRet = 0; |
| switch(_nState) |
| { |
| case MM_DOCUMENTSELECTPAGE : pRet = new SwMailMergeDocSelectPage(this); break; |
| case MM_OUTPUTTYPETPAGE : pRet = new SwMailMergeOutputTypePage(this); break; |
| case MM_ADDRESSBLOCKPAGE : pRet = new SwMailMergeAddressBlockPage(this); break; |
| case MM_GREETINGSPAGE : pRet = new SwMailMergeGreetingsPage(this); break; |
| case MM_LAYOUTPAGE : pRet = new SwMailMergeLayoutPage(this); break; |
| case MM_PREPAREMERGEPAGE : pRet = new SwMailMergePrepareMergePage(this); break; |
| case MM_MERGEPAGE : pRet = new SwMailMergeMergePage(this); break; |
| case MM_OUTPUTPAGE : pRet = new SwMailMergeOutputPage(this); break; |
| } |
| DBG_ASSERT(pRet, "no page created in ::createPage"); |
| return pRet; |
| } |
| /*-- 04.06.2004 13:18:47--------------------------------------------------- |
| |
| -----------------------------------------------------------------------*/ |
| void SwMailMergeWizard::enterState( WizardState _nState ) |
| { |
| ::svt::RoadmapWizard::enterState( _nState ); |
| /* |
| entering a page after the layoutpage requires the insertion |
| of greeting and address block - if not yet done |
| entering the merge or output page requires to create the output document |
| */ |
| if(_nState > MM_LAYOUTPAGE && m_rConfigItem.GetSourceView() && |
| ((m_rConfigItem.IsAddressBlock() && !m_rConfigItem.IsAddressInserted()) || |
| (m_rConfigItem.IsGreetingLine(sal_False) && !m_rConfigItem.IsGreetingInserted() ))) |
| { |
| SwMailMergeLayoutPage::InsertAddressAndGreeting(m_rConfigItem.GetSourceView(), |
| m_rConfigItem, Point(-1, -1), true); |
| } |
| if(_nState >= MM_MERGEPAGE && !m_rConfigItem.GetTargetView()) |
| { |
| CreateTargetDocument(); |
| m_nRestartPage = _nState; |
| EndDialog(RET_TARGET_CREATED); |
| return; |
| } |
| else if(_nState < MM_MERGEPAGE && m_rConfigItem.GetTargetView()) |
| { |
| //close the dialog, remove the target view, show the source view |
| m_nRestartPage = _nState; |
| //set ResultSet back to start |
| m_rConfigItem.MoveResultSet(1); |
| EndDialog(RET_REMOVE_TARGET); |
| return; |
| } |
| bool bEnablePrev = true; |
| bool bEnableNext = true; |
| switch(_nState) |
| { |
| case MM_DOCUMENTSELECTPAGE : |
| bEnablePrev = false; |
| break; |
| case MM_ADDRESSBLOCKPAGE : |
| bEnableNext = m_rConfigItem.GetResultSet().is(); |
| break; |
| case MM_OUTPUTPAGE : |
| bEnableNext = false; |
| break; |
| } |
| enableButtons( WZB_PREVIOUS, bEnablePrev); |
| enableButtons( WZB_NEXT, bEnableNext); |
| |
| UpdateRoadmap(); |
| } |
| /*-- 04.06.2004 12:54:13--------------------------------------------------- |
| |
| -----------------------------------------------------------------------*/ |
| String SwMailMergeWizard::getStateDisplayName( WizardState _nState ) const |
| { |
| String sRet; |
| switch(_nState) |
| { |
| case MM_DOCUMENTSELECTPAGE :sRet = m_sStarting; break; |
| case MM_OUTPUTTYPETPAGE : sRet = m_sDocumentType; break; |
| case MM_ADDRESSBLOCKPAGE : |
| sRet = m_rConfigItem.IsOutputToLetter() ? |
| m_sAddressBlock : m_sAddressList; |
| |
| break; |
| case MM_GREETINGSPAGE : sRet = m_sGreetingsLine; break; |
| case MM_LAYOUTPAGE : sRet = m_sLayout; break; |
| case MM_PREPAREMERGEPAGE : sRet = m_sPrepareMerge; break; |
| case MM_MERGEPAGE : sRet = m_sMerge; break; |
| case MM_OUTPUTPAGE : sRet = m_sOutput; break; |
| } |
| return sRet; |
| } |
| /*-- 24.06.2004 09:24:45--------------------------------------------------- |
| enables/disables pages in the roadmap depending on the current |
| page and state |
| -----------------------------------------------------------------------*/ |
| void SwMailMergeWizard::UpdateRoadmap() |
| { |
| /* |
| MM_DOCUMENTSELECTPAGE > inactive after the layoutpage |
| MM_OUTPUTTYPETPAGE : > inactive after the layoutpage |
| MM_ADDRESSBLOCKPAGE > inactive after the layoutpage |
| MM_GREETINGSPAGE > inactive after the layoutpage |
| MM_LAYOUTPAGE > inactive after the layoutpage |
| inactive if address block and greeting are switched off |
| or are already inserted into the source document |
| MM_PREPAREMERGEPAGE > only active if address data has been selected |
| inactive after preparemerge page |
| MM_MERGEPAGE > only active if address data has been selected |
| |
| MM_OUTPUTPAGE > only active if address data has been selected |
| */ |
| |
| // enableState( <page id>, false ); |
| const sal_uInt16 nCurPage = GetCurLevel(); |
| TabPage* pCurPage = GetPage( nCurPage ); |
| if(!pCurPage) |
| return; |
| bool bEnable = false; |
| bool bAddressFieldsConfigured = !m_rConfigItem.IsOutputToLetter() || |
| !m_rConfigItem.IsAddressBlock() || |
| m_rConfigItem.IsAddressFieldsAssigned(); |
| bool bGreetingFieldsConfigured = !m_rConfigItem.IsGreetingLine(sal_False) || |
| !m_rConfigItem.IsIndividualGreeting(sal_False)|| |
| m_rConfigItem.IsGreetingFieldsAssigned(); |
| //#i97436# if a document has to be loaded then enable output type page only |
| m_bDocumentLoad = false; |
| bool bEnableOutputTypePage = (nCurPage != MM_DOCUMENTSELECTPAGE) || |
| static_cast<svt::OWizardPage*>(pCurPage)->commitPage( ::svt::WizardTypes::eValidate ); |
| |
| for(sal_uInt16 nPage = MM_DOCUMENTSELECTPAGE; nPage <= MM_OUTPUTPAGE; ++nPage) |
| { |
| switch(nPage) |
| { |
| case MM_DOCUMENTSELECTPAGE : |
| bEnable = sal_True; |
| break; |
| case MM_OUTPUTTYPETPAGE : |
| bEnable = bEnableOutputTypePage; |
| break; |
| case MM_ADDRESSBLOCKPAGE : |
| bEnable = !m_bDocumentLoad && bEnableOutputTypePage; |
| break; |
| case MM_GREETINGSPAGE : |
| bEnable = !m_bDocumentLoad && bEnableOutputTypePage && |
| m_rConfigItem.GetResultSet().is() && |
| bAddressFieldsConfigured; |
| break; |
| case MM_PREPAREMERGEPAGE : |
| case MM_MERGEPAGE : |
| case MM_OUTPUTPAGE : |
| case MM_LAYOUTPAGE : |
| bEnable = !m_bDocumentLoad && bEnableOutputTypePage && |
| m_rConfigItem.GetResultSet().is() && |
| bAddressFieldsConfigured && |
| bGreetingFieldsConfigured; |
| if(MM_LAYOUTPAGE == nPage) |
| bEnable &= |
| ((m_rConfigItem.IsAddressBlock() && !m_rConfigItem.IsAddressInserted()) || |
| (m_rConfigItem.IsGreetingLine(sal_False) && !m_rConfigItem.IsGreetingInserted() )); |
| break; |
| } |
| enableState( nPage, bEnable ); |
| } |
| } |
| /*-- 24.06.2004 09:24:45--------------------------------------------------- |
| enables/disables pages in the roadmap depending on the current |
| page and state |
| -----------------------------------------------------------------------*/ |
| void SwMailMergeWizard::CreateTargetDocument() |
| { |
| GetSwView()->GetWrtShell().GetNewDBMgr()-> |
| MergeDocuments( m_rConfigItem, *GetSwView() ); |
| m_rConfigItem.SetMergeDone(); |
| if( m_rConfigItem.GetTargetView() ) |
| m_rConfigItem.GetTargetView()->GetViewFrame()->GetFrame().Appear(); |
| } |
| /*-- 23.08.2004 08:51:36--------------------------------------------------- |
| |
| -----------------------------------------------------------------------*/ |
| void SwMailMergeWizard::updateRoadmapItemLabel( WizardState _nState ) |
| { |
| svt::RoadmapWizard::updateRoadmapItemLabel( _nState ); |
| } |
| |
| // ------------------------------------------------------------------------ |
| |
| short SwMailMergeWizard::Execute() |
| { |
| DBG_ERROR( "SwMailMergeWizard cannot be executed via Dialog::Execute!\n" |
| "It creates a thread (MailDispatcher instance) that will call" |
| "back to VCL apartment => deadlock!\n" |
| "Use Dialog::StartExecuteModal to execute the dialog!" ); |
| return RET_CANCEL; |
| } |
| |
| // ------------------------------------------------------------------------ |
| |
| void SwMailMergeWizard::StartExecuteModal( const Link& rEndDialogHdl ) |
| { |
| ::svt::RoadmapWizard::StartExecuteModal( rEndDialogHdl ); |
| } |
