AOO410/main/sw/source/core/doc/gctable.cxx

/**************************************************************
 * 
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 * 
 *   http://www.apache.org/licenses/LICENSE-2.0
 * 
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 * 
 *************************************************************/



// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_sw.hxx"


#include <hintids.hxx>
#include <editeng/boxitem.hxx>
#include <tblrwcl.hxx>
#include <swtblfmt.hxx>


inline const SvxBorderLine* GetLineTB( const SvxBoxItem* pBox, sal_Bool bTop )
{
	return bTop ? pBox->GetTop() : pBox->GetBottom();
}


sal_Bool _SwGCBorder_BoxBrd::CheckLeftBorderOfFormat( const SwFrmFmt& rFmt )
{
	const SvxBorderLine* pBrd;
	const SfxPoolItem* pItem;
	if( SFX_ITEM_SET == rFmt.GetItemState( RES_BOX, sal_True, &pItem ) &&
		0 != ( pBrd = ((SvxBoxItem*)pItem)->GetLeft() ) )
	{
		if( *pBrdLn == *pBrd )
			bAnyBorderFnd = sal_True;
		return sal_True;
	}
	return sal_False;
}



sal_Bool lcl_GCBorder_ChkBoxBrd_L( const SwTableLine*& rpLine, void* pPara )
{
	const SwTableBox* pBox = rpLine->GetTabBoxes()[ 0 ];
	return lcl_GCBorder_ChkBoxBrd_B( pBox, pPara );
}

sal_Bool lcl_GCBorder_ChkBoxBrd_B( const SwTableBox*& rpBox, void* pPara )
{
	sal_Bool bRet = sal_True;
	if( rpBox->GetTabLines().Count() )
	{
		for( sal_uInt16 n = 0, nLines = rpBox->GetTabLines().Count();
				n < nLines && bRet; ++n )
		{
			const SwTableLine* pLine = rpBox->GetTabLines()[ n ];
			bRet = lcl_GCBorder_ChkBoxBrd_L( pLine, pPara );
		}
	}
	else
	{
		_SwGCBorder_BoxBrd* pBPara = (_SwGCBorder_BoxBrd*)pPara;
		bRet = pBPara->CheckLeftBorderOfFormat( *rpBox->GetFrmFmt() );
	}
	return bRet;
}

sal_Bool lcl_GCBorder_GetLastBox_L( const SwTableLine*& rpLine, void* pPara )
{
	const SwTableBoxes& rBoxes = rpLine->GetTabBoxes();
	const SwTableBox* pBox = rBoxes[ rBoxes.Count()-1 ];
	::lcl_GCBorder_GetLastBox_B( pBox, pPara );
	return sal_True;
}

sal_Bool lcl_GCBorder_GetLastBox_B( const SwTableBox*& rpBox, void* pPara )
{
	SwTableLines& rLines = (SwTableLines&)rpBox->GetTabLines();
	if( rLines.Count() )
		rLines.ForEach( &lcl_GCBorder_GetLastBox_L, pPara );
	else
		((SwTableBoxes*)pPara)->Insert( rpBox, ((SwTableBoxes*)pPara)->Count() );
	return sal_True;
}

// suche das "Ende" der vorgegebene BorderLine. Returnt wird die "Layout"Pos!
sal_uInt16 lcl_FindEndPosOfBorder( const SwCollectTblLineBoxes& rCollTLB,
						const SvxBorderLine& rBrdLn, sal_uInt16& rStt, sal_Bool bTop )
{
	sal_uInt16 nPos, nLastPos = 0;
	for( sal_uInt16 nEnd = rCollTLB.Count(); rStt < nEnd; ++rStt )
	{
		const SfxPoolItem* pItem;
		const SvxBorderLine* pBrd;
		const SwTableBox& rBox = rCollTLB.GetBox( rStt, &nPos );

		if( SFX_ITEM_SET != rBox.GetFrmFmt()->GetItemState(RES_BOX,sal_True, &pItem )
			|| 0 == ( pBrd = GetLineTB( (SvxBoxItem*)pItem, bTop ))
			|| !( *pBrd == rBrdLn ))
			break;
		nLastPos = nPos;
	}
	return nLastPos;
}

inline const SvxBorderLine* lcl_GCBorder_GetBorder( const SwTableBox& rBox,
												sal_Bool bTop,
												const SfxPoolItem** ppItem )
{
	return SFX_ITEM_SET == rBox.GetFrmFmt()->GetItemState( RES_BOX, sal_True, ppItem )
			? GetLineTB( (SvxBoxItem*)*ppItem, bTop )
			: 0;
}

void lcl_GCBorder_DelBorder( const SwCollectTblLineBoxes& rCollTLB,
								sal_uInt16& rStt, sal_Bool bTop,
								const SvxBorderLine& rLine,
								const SfxPoolItem* pItem,
								sal_uInt16 nEndPos,
								SwShareBoxFmts* pShareFmts )
{
	SwTableBox* pBox = (SwTableBox*)&rCollTLB.GetBox( rStt );
	sal_uInt16 nNextPos;
	const SvxBorderLine* pLn = &rLine;

	do {
		if( pLn && *pLn == rLine )
		{
			SvxBoxItem aBox( *(SvxBoxItem*)pItem );
			if( bTop )
				aBox.SetLine( 0, BOX_LINE_TOP );
			else
				aBox.SetLine( 0, BOX_LINE_BOTTOM );

			if( pShareFmts )
				pShareFmts->SetAttr( *pBox, aBox );
			else
                pBox->ClaimFrmFmt()->SetFmtAttr( aBox );
		}

		if( ++rStt >= rCollTLB.Count() )
			break;

		pBox = (SwTableBox*)&rCollTLB.GetBox( rStt, &nNextPos );
		if( nNextPos > nEndPos )
			break;

		pLn = lcl_GCBorder_GetBorder( *pBox, bTop, &pItem );

	} while( sal_True );
}


sal_Bool lcl_GC_Line_Border( const SwTableLine*& rpLine, void* pPara )
{
	_SwGCLineBorder* pGCPara = (_SwGCLineBorder*)pPara;

	// zuerst die rechte Kante mit der linken Kante der naechsten Box
	// innerhalb dieser Line
	{
		_SwGCBorder_BoxBrd aBPara;
		const SvxBorderLine* pBrd;
		const SfxPoolItem* pItem;
		const SwTableBoxes& rBoxes = rpLine->GetTabBoxes();
		for( sal_uInt16 n = 0, nBoxes = rBoxes.Count() - 1; n < nBoxes; ++n )
		{
			SwTableBoxes aBoxes;
			{
				const SwTableBox* pBox = rBoxes[ n ];
				if( pBox->GetSttNd() )
					aBoxes.Insert( pBox, 0 );
				else
					lcl_GCBorder_GetLastBox_B( pBox, &aBoxes );
			}

			SwTableBox* pBox;
			for( sal_uInt16 i = aBoxes.Count(); i; )
				if( SFX_ITEM_SET == (pBox = aBoxes[ --i ])->GetFrmFmt()->
					GetItemState( RES_BOX, sal_True, &pItem ) &&
					0 != ( pBrd = ((SvxBoxItem*)pItem)->GetRight() ) )
				{
					aBPara.SetBorder( *pBrd );
					const SwTableBox* pNextBox = rBoxes[n+1];
					if( lcl_GCBorder_ChkBoxBrd_B( pNextBox, &aBPara ) &&
						aBPara.IsAnyBorderFound() )
					{
						SvxBoxItem aBox( *(SvxBoxItem*)pItem );
						aBox.SetLine( 0, BOX_LINE_RIGHT );
						if( pGCPara->pShareFmts )
							pGCPara->pShareFmts->SetAttr( *pBox, aBox );
						else
                            pBox->ClaimFrmFmt()->SetFmtAttr( aBox );
					}
				}

			aBoxes.Remove( 0, aBoxes.Count() );
		}
	}

	// und jetzt die eigene untere Kante mit der nachfolgenden oberen Kante
	if( !pGCPara->IsLastLine() )
	{
		SwCollectTblLineBoxes aBottom( sal_False );
		SwCollectTblLineBoxes aTop( sal_True );

		::lcl_Line_CollectBox( rpLine, &aBottom );

		const SwTableLine* pNextLine = (*pGCPara->pLines)[ pGCPara->nLinePos+1 ];
		::lcl_Line_CollectBox( pNextLine, &aTop );

		// dann entferne mal alle "doppelten" gleichen Lines
		sal_uInt16 nBtmPos, nTopPos,
				nSttBtm = 0, nSttTop = 0,
				nEndBtm = aBottom.Count(), nEndTop = aTop.Count();

		const SwTableBox *pBtmBox = &aBottom.GetBox( nSttBtm++, &nBtmPos ),
						 *pTopBox = &aTop.GetBox( nSttTop++, &nTopPos );
		const SfxPoolItem *pBtmItem = 0, *pTopItem = 0;
		const SvxBorderLine *pBtmLine(0), *pTopLine(0);
		sal_Bool bGetTopItem = sal_True, bGetBtmItem = sal_True;

		do {
			if( bGetBtmItem )
				pBtmLine = lcl_GCBorder_GetBorder( *pBtmBox, sal_False, &pBtmItem );
			if( bGetTopItem )
				pTopLine = lcl_GCBorder_GetBorder( *pTopBox, sal_True, &pTopItem );

			if( pTopLine && pBtmLine && *pTopLine == *pBtmLine )
			{
				// dann kann einer entfernt werden, aber welche?
				sal_uInt16 nSavSttBtm = nSttBtm, nSavSttTop = nSttTop;
				sal_uInt16 nBtmEndPos = ::lcl_FindEndPosOfBorder( aBottom,
												*pTopLine, nSttBtm, sal_False );
				if( !nBtmEndPos ) nBtmEndPos = nBtmPos;
				sal_uInt16 nTopEndPos = ::lcl_FindEndPosOfBorder( aTop,
												*pTopLine, nSttTop, sal_True );
				if( !nTopEndPos ) nTopEndPos = nTopPos;


				if( nTopEndPos <= nBtmEndPos )
				{
					// dann die TopBorder bis zur BottomEndPos loeschen
					nSttTop = nSavSttTop;
					if( nTopPos <= nBtmEndPos )
						lcl_GCBorder_DelBorder( aTop, --nSttTop, sal_True,
											*pBtmLine, pTopItem, nBtmEndPos,
											pGCPara->pShareFmts );
					else
						nSttBtm = nSavSttBtm;
				}
				else
				{
					// sonst die BottomBorder bis zur TopEndPos loeschen
					nSttBtm = nSavSttBtm;
					if( nBtmPos <= nTopEndPos )
						lcl_GCBorder_DelBorder( aBottom, --nSttBtm, sal_False,
											*pTopLine, pBtmItem, nTopEndPos,
											pGCPara->pShareFmts );
					else
						nSttTop = nSavSttTop;
				}
				nTopPos = nBtmPos;
			}

			if( nTopPos == nBtmPos )
			{
				if( nSttBtm >= nEndBtm || nSttTop >= nEndTop )
					break;

				pBtmBox = &aBottom.GetBox( nSttBtm++, &nBtmPos );
				pTopBox = &aTop.GetBox( nSttTop++, &nTopPos );
				bGetTopItem = bGetBtmItem = sal_True;
			}
			else if( nTopPos < nBtmPos )
			{
				if( nSttTop >= nEndTop )
					break;
				pTopBox = &aTop.GetBox( nSttTop++, &nTopPos );
				bGetTopItem = sal_True;
				bGetBtmItem = sal_False;
			}
			else
			{
				if( nSttBtm >= nEndBtm )
					break;
				pBtmBox = &aBottom.GetBox( nSttBtm++, &nBtmPos );
				bGetTopItem = sal_False;
				bGetBtmItem = sal_True;
			}

		} while( sal_True );
	}

	((SwTableLine*)rpLine)->GetTabBoxes().ForEach( &lcl_GC_Box_Border, pPara );

	++pGCPara->nLinePos;

	return sal_True;
}

sal_Bool lcl_GC_Box_Border( const SwTableBox*& rpBox, void* pPara )
{
	if( rpBox->GetTabLines().Count() )
	{
		_SwGCLineBorder aPara( *rpBox );
		aPara.pShareFmts = ((_SwGCLineBorder*)pPara)->pShareFmts;
		((SwTableBox*)rpBox)->GetTabLines().ForEach( &lcl_GC_Line_Border, &aPara );
	}
	return sal_True;
}

struct _GCLinePara
{
	SwTableLines* pLns;
	SwShareBoxFmts* pShareFmts;

	_GCLinePara( SwTableLines& rLns, _GCLinePara* pPara = 0 )
		: pLns( &rLns ), pShareFmts( pPara ? pPara->pShareFmts : 0 )
	{}
};

sal_Bool lcl_MergeGCBox( const SwTableBox*& rpTblBox, void* pPara )
{
	SwTableBox*& rpBox = (SwTableBox*&)rpTblBox;
	sal_uInt16 n, nLen = rpBox->GetTabLines().Count();
	if( nLen )
	{
		// ACHTUNG: die Anzahl der Lines kann sich aendern!
		_GCLinePara aPara( rpBox->GetTabLines(), (_GCLinePara*)pPara );
		for( n = 0; n < rpBox->GetTabLines().Count() &&
			lcl_MergeGCLine( *(rpBox->GetTabLines().GetData() + n), &aPara );
			++n )
			;

		if( 1 == rpBox->GetTabLines().Count() )
		{
			// Box mit einer Line, dann verschiebe alle Boxen der Line
			// hinter diese Box in der Parent-Line und loesche diese Box
			SwTableLine* pInsLine = rpBox->GetUpper();
			SwTableLine* pCpyLine = rpBox->GetTabLines()[0];
			sal_uInt16 nInsPos = pInsLine->GetTabBoxes().C40_GETPOS( SwTableBox, rpBox );
			for( n = 0; n < pCpyLine->GetTabBoxes().Count(); ++n )
				pCpyLine->GetTabBoxes()[n]->SetUpper( pInsLine );

			pInsLine->GetTabBoxes().Insert( &pCpyLine->GetTabBoxes(), nInsPos+1 );
			pCpyLine->GetTabBoxes().Remove( 0, n );
			// loesche alte die Box mit der Line
			pInsLine->GetTabBoxes().DeleteAndDestroy( nInsPos );

			return sal_False;		// neu aufsetzen
		}
	}
	return sal_True;
}

sal_Bool lcl_MergeGCLine( const SwTableLine*& rpLine, void* pPara )
{
	SwTableLine* pLn = (SwTableLine*)rpLine;
	sal_uInt16 nLen = pLn->GetTabBoxes().Count();
	if( nLen )
	{
		_GCLinePara* pGCPara = (_GCLinePara*)pPara;
		while( 1 == nLen )
		{
			// es gibt eine Box mit Lines
			SwTableBox* pBox = pLn->GetTabBoxes()[0];
			if( !pBox->GetTabLines().Count() )
				break;

			SwTableLine* pLine = pBox->GetTabLines()[0];

			// pLine wird zu der aktuellen, also der rpLine,
			// die restlichen werden ins LinesArray hinter der akt.
			// verschoben.
			// Das LinesArray ist im pPara!
			nLen = pBox->GetTabLines().Count();

			SwTableLines& rLns = *pGCPara->pLns;
			const SwTableLine* pTmp = pLn;
			sal_uInt16 nInsPos = rLns.GetPos( pTmp );
			ASSERT( USHRT_MAX != nInsPos, "Line nicht gefunden!" );

			SwTableBox* pUpper = pLn->GetUpper();

			rLns.Remove( nInsPos, 1 );		// die Line dem aus Array loeschen
			rLns.Insert( &pBox->GetTabLines(), nInsPos );

			// JP 31.03.99: Bug 60000 - die Attribute der zu loeschenden
			// Line an die "eingefuegten" uebertragen
			const SfxPoolItem* pItem;
			if( SFX_ITEM_SET == pLn->GetFrmFmt()->GetItemState(
									RES_BACKGROUND, sal_True, &pItem ))
			{
				SwTableLines& rBoxLns = pBox->GetTabLines();
				for( sal_uInt16 nLns = 0; nLns < nLen; ++nLns )
					if( SFX_ITEM_SET != rBoxLns[ nLns ]->GetFrmFmt()->
							GetItemState( RES_BACKGROUND, sal_True ))
						pGCPara->pShareFmts->SetAttr( *rBoxLns[ nLns ], *pItem );
			}

			pBox->GetTabLines().Remove( 0, nLen );	// Lines aus Array loeschen

			delete pLn;

			// Abhaengigkeit neu setzen
			while( nLen-- )
				rLns[ nInsPos++ ]->SetUpper( pUpper );

			pLn = pLine;						// und neu setzen
			nLen = pLn->GetTabBoxes().Count();
		}

		// ACHTUNG: die Anzahl der Boxen kann sich aendern!
		for( nLen = 0; nLen < pLn->GetTabBoxes().Count(); ++nLen )
			if( !lcl_MergeGCBox( *(pLn->GetTabBoxes().GetData() + nLen ), pPara ))
				--nLen;
	}
	return sal_True;
}

		// Struktur ein wenig aufraeumen
void SwTable::GCLines()
{
	// ACHTUNG: die Anzahl der Lines kann sich aendern!
	_GCLinePara aPara( GetTabLines() );
	SwShareBoxFmts aShareFmts;
	aPara.pShareFmts = &aShareFmts;
	for( sal_uInt16 n = 0; n < GetTabLines().Count() &&
			lcl_MergeGCLine( *(GetTabLines().GetData() + n ), &aPara ); ++n )
		;
}